Home

Users Manual

1. levelers Now the table can be turned over right side up The table is a little heavy you d better have two or more people carefully lift one side of the table and set it up on its legs INSTALLING SCOREBOARD Remove the scoreboard unit from the small box Check the scoreboard to make sure no To Purchase This Item Visit BMI Gaming www bmigaming com 800 746 2255 1 561 391 7200 components were dislodged during shipping To do this open the back of the scoreboard and inspect the inside If any of the wood brackets are loose use glue to reattach them to ensure the display glass and the PCB are secured to the front of the scoreboard If you need to glue anything wait until the glue is dried before proceeding with the rest of the assembly Find the scoreboard attaching screws and have them ready Set the scoreboard on the back Narrow end of the table and insert the scoreboard screws through the holes in the bottom of the scoreboard into the threaded holes in the back of the table Tighten both screws with the Allen wrench Next connect the 9 pin connectors Please pay attention to the direction of the male and the female connectors Close the back of the scoreboard and plug the unit in Your scoreboard should be ready to use Turn on the electrical power by using the switch located under the front of the table That switch allows you to turn the unit on during play and turn it off when finished The score for t
2. playing surface to become slightly concave or convex This condition can be corrected by tightening the adjusting nuts on the climatic adjuster These climatic adjusters are customarily found on fine shuffleboard tables and all work in the same way Moving the adjusting nuts outward will tend to make the surface more concave and moving the adjusting nuts inward will tend to make the surface more convex Adjustments should be made gradually Make an adjustment and let the playing surface adjust over a day or two Then check it and adjust further if necessary FEEDBACK We would like to hear from you regarding your table Any suggestions you may have to improve the experience would be appreciated You can reach us at sales megamaniadiverions com Enjoy your fine Snap Back Shuffleboard To Purchase This Item Visit BMI Gaming www bmigaming com 800 746 2255 1 561 391 7200 SNAP BACK SHUFFLEBOARD RULES OF THE GAME The object of the game is to reach the Game Goal before your opponent HOW TO START A coin toss decides who starts the game The winner of the coin toss also decides if the game will start from the left or the right The first weight Blue is slid from the front of the table towards the back so that it bounces from the back bumper onto the other side of the playing surface The opponent then slides his her weight Red so that it bounces from the back bumper to try to bump off the blue weight or to pla
3. To Purchase This Item Visit BMI Gaming www bmigaming com 800 746 2255 1 561 391 7200 Users Manual TAVERN MODEL To Purchase This Item Visit BMI Gaming www bmigaming com 800 746 2255 1 561 391 7200 ASSEMBLY INSTRUCTIONS Congratulations on your purchase of a fine Snap Back Shuffleboard To make it as easy as possible to assemble your table we have prepared these pages to walk you through the assembly process step by step In order to assemble the table you will need METRIC wrenches to tighten the screws The wrench is included in your box so you should be able to assemble the table with the tools provided First notice there are two boxes These boxes contain a cradle box and an accessories box The cradle box includes a cradle a playing surface already assembled on the cradle ramps already assembled Small V shaped ramp already assembled and the tools Also enclosed are the manufacturer s assembly instructions which include schematics of the table game parts list game rules and the attaching screws The accessory box include a scoreboard 4 legs 4 leg levelers 2 shelves a bottle of powder a box of pucks a brush screws and other accessories UNPACK BOXES When you open the boxes be sure you are careful with any boxes cutter you might be using to ensure you don t cut the table by mistake A Philips screwdriver is included in the cradle box it can be used to open the accessor
4. able Do not skip attaching the shelves even if you don t plan to use the shelves for storage The shelves are an integral part of the structure of the legs and are needed to ensure stability of the table The small shelf is inserted between the rear legs which are located at the narrow end of the table The shelf surface should face the outside of the table Find the shelf screws in one of the plastic bags Insert the shelf screw through the hole on side of shelf into the threaded hole in the leg Hand tightens screw and repeat with other shelf screws The large shelf is installed in the same way hand tightened between the front legs located at the wide end of the table The shelf surface should face the outside of the table After both the shelves are attached to the legs you can screw the legs to the table receptacle by inserting the leg bolt with washer through the receptacle hole into the threaded hole in the leg Hand tightens each leg screws to the legs Once all leg screws are on use the Allen wrench to tighten the leg screws and the shelf Screws Next install the leg levelers on the bottom of the leg The leg leveler bolt should be hand tightened so the round base engages the threaded bolt when rotated Insert the threaded bolt into the threaded hole in the middle of the leg bottom and turn it clockwise until it is nearly all the way threaded into the hole Then back off about 2 turns Repeat for the three other leg
5. ce his her weight beyond the Blue The players continue to take turns until all the 8 weights are played At this point the players determine which team scores and add the score from this round to the game score The game then continues from the other side with the player who scored last starting the play in the next round Play continues by alternating sides until the total game score of one of the opponents reaches or exceeds the Game Goal SCORING OF POINTS Snap Back Shuffleboard is normally played to a Game Goal of 21 points although the goal can be a different number upon mutual consent of the contestants When a weight comes to rest on a scoring Black line that weight scores the smaller number The weight must clear the first line completely to score If a weight comes to rest before entering the scoring surface area it must be removed from the playing surface before the opponent plays the next weight f a weight is overhanging the front of the playing surface 4 points area that weight has a score of 5 points Only one player can score points in a round Point total for a round is the sum at the points for each weight that is closer to the front end of the playing surface than any of the opponent s weights Example A If after throwing all 8 weights there is a Blue weight and a Red weight in the 4 point section but the Red weight is ahead of the Blue only the Red scores points Example B If t
6. he red is increased by pushing the red button closest to the scoreboard and reduced by pushing the other red button Of course the blue works the same way The score is reset to 00 00 by holding any of the buttons in for 2 seconds FINAL STEPS Place the table in the location you plan to use it Wipe off the surface with the brush to remove any stray pieces of paper plastic or cardboard Then sprinkle some shuffleboard powder on the playing surface We recommend that you use a fine shuffleboard powder product You can purchase it from Mega Mania Diversions LLC and we will ship it out to you immediately Or you can get it from most billiard supply stores You should level the table by using a level and adjusting the leg levelers Or you can level the table by sliding the weight on the playing surface and watching if it moves to one side or another Either way the leg leveler can be adjusted by turning the leveler clockwise or counter clockwise to move the leg up or down You will need 2 people to level the table one to raise the table while the other rotates the adjuster on the bottom of the leg To Purchase This Item Visit BMI Gaming www bmigaming com 800 746 2255 1 561 391 7200 HOW TO USE THE CLIMATIC ADJUSTER The table comes from the factory in a level state You will want to maintain the surface as level as possible or perhaps just slightly concave Over time however changing humidity conditions sometimes cause the
7. here are 2 Blue weights ahead of the Red weights the 2 Blue weights score points and the Red weights do not score STRATEGY An effective strategy would be to slide your weights into scoring position then to shield those weights from your opponent by using later turns to block them from being knocked out of scoring position To Purchase This Item Visit BMI Gaming www bmigaming com 800 746 2255 1 561 391 7200 How to 1 nstal Scor eboar d Cadi e Leg evel er N8 30 Fasten shel ves To Purchase This Item Visit BMI Gaming www bmigaming com 800 746 2255 1 561 391 7200 SNAP BACK Shuffleboard Hardware O n MM 6mm Allen wrench shuffleboard height M8 Allen screws Philips screws climatic adjuster table legs scoreboard shelves Clean powder on the surface Reattach loose assembly mL amp ho O N E A ct lt
8. y box Carefully remove the legs the shelves the scoreboard box the brush and the screws from the box Try not to bump these parts against the wood finish on the table to prevent scratching The pucks powder screws brush 502 glue and leg levelers are in the shelves box Next you will notice that there are several plastic bags of screws t was intended that each bag would contain all the screws and washers for each purpose For example one bag is labeled LEG SCREWS and contains all the screws and washers needed to attach the legs to the bottom of the table Another bag is labeled SHFLF SCREWS Take the assembled cradle out of the box and place it upside down on something soft like arugoracarpet A heavy corrugated cardboard will do if you are careful not to scratch the To Purchase This Item Visit BMI Gaming www bmigaming com 800 746 2255 1 561 391 7200 surface against the floor ASSEMBLE LEGS The legs are assembled to the table by inserting the legs into the square wooden receptacles There are 4 such square receptacles in the bottom of the table one for each leg Insert the legs into the receptacles but do not bolt them on yet Note that there are 2 threaded holes on one side of each leg These holes are for attaching the shelves so the legs should be inserted into the receptacles with these holes facing the other leg The shelves need to be screwed onto the legs before the legs are screwed to the t

Users Manual

Contents

Download Pdf Manuals

Related Search

Related Contents