SCD-1020R (manual)
Contents
1. ra NN N morh kl ra safety information AN RISK OF ELECTRIC SHOCK M DO NOT OPEN CAUTION TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER OR BACK NO USER SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL This symbol indicates that dangerous voltage consisting a risk of electric shock is present within this unit This exclamation point symbol is intended to alert the user to the presence of important operating and maintenance servicing instructions in the literature accompanying the appliance WARNING To prevent damage which may result in fire or electric shock hazard do not expose this appliance to rain or moisture To prevent injury this apparatus must be securely attached to the floor wall in accordance with the installation instructions WARNING 1 Be sure to use only the standard adapter that is specified in the specification sheet Using any other adapter could cause fire electrical shock or damage to the product 2 Incorrectly connecting the power supply or replacing battery may cause explosion fire electric shock or damage to the product 3 Do not connect multiple cameras to a single adapter Exceeding the capacity may cause abnormal heat generation or fire 4 Securely plug the power cord into the power receptacle insecure connection may cause fire 5 When installing the camera fasten it securely and firmly The fall of2. SAMSUNG TECHWIN IR Dome Camera User Manual 502 10208 IR Dome Camera User Manual Copyright 2011 Samsung Techwin Co Ltd All rights reserved Trademark SAMSUNG TECHWIN 279 is the registered logo of Samsung Techwin Co Ltd The name of this product is the registered trademark of Samsung Techwin Co Ltd Other trademarks mentioned in this manual are the registered trademark of their respective company Restriction Samsung Techwin Co Ltd shall reserve the copyright of this document Under no circumstances this document shall be reproduced distributed or changed partially or wholly without formal authorization of Samsung Techwin Disclaimer Samsung Techwin makes the best to verify the integrity and correctness of the contents in this document but no formal guarantee shall be provided Use of this document and the subsequent results shall be entirely on the user s own responsibility Samsung Techwin reserves the right to change the contents of this document without prior notice Warranty If the product does not operate properly in normal conditions please let us know Samsung Techwin will resolve the problem for free of charge The warranty period is 3 years However the followings are excluded f the system behaves abnormally because you run a program irrelevant to the system operation Deteriorated performance or natural worn out in process of time Iro
3. camera may cause personal injury English _3 Do not place conductive objects e g screwdrivers coins metal parts etc or containers filled with water on top of the camera doing so may cause personal injury due to fire electric shock or falling objects Do not install the unit in humid dusty or sooty locations Doing so may cause fire or electric shock If any unusual smells or smoke come from the unit stop using the product in such case immediately disconnect the power source and contact the service center continued use in such a condition may cause fire or electric shock If this product fails to operate normally contact the nearest service center never disassemble or modify this product in any way samsung is not liable for problems caused by unauthorized modifications or attempted repair 10 When cleaning do not spray water directly onto parts of the product doing so may cause ire or electric shock CAUTION 1 9 Do not drop objects on the product or apply strong shock to it Keep away from a location subject to excessive vibrationor magnetic interference Do not install in a location subject to high temperature over 50 C low temperature below 10 C or high humidity Doing so may cause fire or electric shock If you want to relocate the already installed product be sure to turn off the power and then move or reinstall it Remove the power plug from the outlet whe
4. tighten the tilt adjustable screw if you want to fix the angle If you install the camera vertically on a slanting ceiling or wall the video from the camera may not be displayed properly If this is the case adjust the lens direction to correct the display of the video 10_English specifications SPECIFICATIONS Item SCD 1020R Video Imaging Device 5 Sensor Format 680 x 512 Scanning System Interlace Synchronization Internal Frequency 15 734KHz V 59 94Hz Horizontal Resolution 520 TV lines Min Illumination OLux IR LED ON S N Ratio Y Signal 4608 Video Output CVBS 1 0 Vp p 750 composite Lens Focus Length 3 6mm Max Aperture Ratio 2 Angular Field of View H 56 V 42 Operational Shutter Mode Auto Rolling Shutter Gain Control Auto White Balance Auto 3200 K 6500 K Day Night Auto Digital Noise Reduction Auto IR Distance 10m IR LED 12EA Environmental Operating Temperature Humidity 10 50 14 F 122 F Less than 90 RH English_11 Item SCD 1020R Electrical Input Voltage DC 12V Power Consumption 2 2W Mechanical Dimension W H 102 XH71 7 Weight 1809 12 English un E 60 O Iron Rn S lt SALES NETWORK SAMSUNG TECHWIN CO LTD Samsungtechwin R amp D Center 701 Sampyeong dong Bundang gu Seongnam si Gy
5. Part Names Name Description 1 IRLED These infrared LED s are controlled by the illumination sensor 2 Lens Focal length of 3 6mm enables you to cover relatively longer range of monitoring Illumination 3 Sensor Detects incoming light to control the IR LED Video Output 4 pi Connect the VIDEO OUT jack to the VIDEO IN jack of monitor Jack 5 Power Input Connect the adaptor to the power input connector Connector PACKAGE CONTENTS NON p Camera 8_English al Screw 3EA manual ot rir donc AI connecting with other device Installing the camera Precautions before installation Ensure you read the following instructions before installing the camera Select an installation site ceiling or wall that can endure at least 5 times of the camera weight Stuck in or peeled off cables can cause damage to the product or a fire 1 Hold down the bottom lock lever while removing the cover with the other hand i 2 Press and hold the lock key outward in the arrow direction and turn the bracket counter clockwise to remove it 3 Use the provided screws x3 to fix the bracket to a desired position ceiling or wall Ensure that the CAMERA FRONT gt label on the bracket faces the direction for camera monitoring Wiring Cover English 9 4 Arrange th
6. e cables through the bracket to the ceiling or wall If you intend to drill a hole in the installation site for the wiring purpose remove the wiring cover to reveal a hole Arrange the cables through the hole If you intend to arrange the cables without drilling a hole use the empty area opposite to the CAMERA FRONT label side for the wiring purpose 5 Mount the main unit onto the bracket Align the marking hole of the main unit with the lt CAMERA FRONT gt label of the bracket and turn the unit in the lt LOCK gt direction 6 Adjust the lens in a desired direction For adjusting the lens direction refer to Adjusting the monitoring direction for the camera 7 Fix the cover to the main unit ui Align the lock key of the main unit with the latch of the cover Press gt down the cover until you hear a click Adjusting the monitoring direction for the camera Panning Tilting Lens rotation You can adjust the camera direction only when the camera is fixed on the ceiling Then turning the camera to the left or right is referred to as Panning while tilting the angle is Tilting If you want to adjust the panning direction loosen the bottom screw and turn the camera to a desired direction Then tighten the screw back If you couldn t tighten the screw for positioning reasons select a different screw hole and try again The tilting is available between 0 and 60 When you finish adjusting the tilt
7. eonggi do Korea 463 400 TEL 82 70 7147 8740 60 FAX 82 31 8018 3745 SAMSUNG TECHWIN AMERICA Inc SAMSUNG TECHWIN EUROPE LTD 100 Challenger Rd Suite 700 Ridgefield Park NJ 07660 Samsung House 1000 Hillswood Drive Hillswood Business Park Toll Free 1 877 213 1222 Direct 1 201 325 6920 Chertsey Surrey UNITED KINGDOM KT16 OPS Fax 1 201 373 0124 TEL 44 1932 45 5300 FAX 44 1932 45 5325 www samsungcctvusa com www samsungtechwin com www samsungsecurity com P NO 1 000620
8. harmful interference to radio communications Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense IC Compliance Notice This Class A digital apparatus meets all requirements of the Canadian Interference Causing Equipment Regulations of ICES 003 Correct Disposal of This Product Waste Electrical amp Electronic Equipment Applicable in the European Union and other European countries with separate collection systems This marking on the product accessories or literature indicates that the product and its electronic accessories e g charger headset USB cable should not be disposed of with other household waste at the end of their working life To prevent possible harm to the environment or human health from uncontrolled waste disposal please separate these items from other types of waste and recycle them responsibly to promote the sustainable WENN 721156 of material resources Household users should contact either the retailer where they purchased this product or their local government office for details of where and how they can take these items for environmentally safe recycling Business users should contact their supplier and check the terms and conditions of the purchase contract This product and its electronic accessories should not be mixed with other commercial wastes for disposal Correct disp
9. n then there is a lightning Neglecting to do so may cause fire or damage to the product Keep out of direct sunlight and heat radiation sources It may cause fire Install it in a place with good ventilation Avoid aiming the camera directly towards extremely bright objects such as sun as this may damage the CCD image sensor Apparatus shall not be exposed to dripping or splashing and no objects filled with liquids Such as vases shall be placed on the apparatus The Mains plug is used as a disconnect device and shall stay readily operable at any time 10 Do not expose the camera to radioactivity Radioactivity exposure may damage the CCD 4 English HU 2 Safety information FCC STATEMENT This device complies with part 15 of the FCC Rules Operation is subject to the following two conditions 1 This device may not cause harmful interference and 2 This device must accept any interference received including interference that may cause undesired operation CAUTION This equipment has been tested and found to comply with the limits for a Class A digital device pursuant to part 15 of FCC Rules These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instruction manual may cause
10. nding prong The wide blade or the third prong is provided for your safety If he provided plug does not fit into your outlet consult an electrician for replacement of the obsolete outlet 10 Protect the power cord from being walked on or pinched particularly at plugs convenience receptacles and the point where they exit from the apparatus 1 Only use attachments accessories specified by the manufacturer 12 Use only with cart stand tripod bracket or table specified by the manufacturer or sold with the apparatus 13 Unplug this apparatus when a card is used Use caution when moving he cart apparatus combination to avoid injury from tip over 14 Refer all servicing to qualified service personnel Servicing is required when the apparatus has been damaged in any way such as powersupply cord or plug is damaged liquid has been spilled or objects have fallen into the apparatus the apparatus has been exposed to rain or moisture does not operate normally or has been dropped Apparatus shall not be exposed to dripping or splashing and no objects filled with liquids such as vases shall be placed on the apparatus 6_English IP Y y f Contents CAMERA CONNECTING WITH OTHER DEVICE PRODUCT SPECIFICATION 8 Part Names 8 Package Contents 9 Installing the camera 10 Adjusting the monitoring direction for the camera 11 Product specification English 7 CAMERA
11. osal of batteries in this product Applicable in the European Union and other European countries with separate battery return systems This marking on the battery manual or packaging indicates that the batteries in this product should not be disposed of with other household waste at the end of their working life Where marked the chemical symbols Hg Cd or Pb indicate that the battery contains mercury cadmium or lead above the reference levels in EC Directive 2006 66 If batteries are not properly disposed of these substances can cause harm to human health or the environment To protect natural resources and to promote material reuse please separate batteries from other types of waste and recycle them through your local free battery retum system English 5 ol Important safety instructions i Read these instructions Keep these instructions Heed all warnings Follow all instructions Do not use this apparatus near water Clean only with dry cloth 5 D Do not block any ventilation openings Install in accordance with the manufacturer s instructions 8 Do not install near any heat sources such as radiators heat registers or other apparatus including amplifiers that produce heat 9 Do not defeat the safety purpose of the polarized or grounding type plug A polarized plug has two blades with one wider than the other A grounding type plug has two blades and a third grou
Download Pdf Manuals
Related Search
SCD 1020R (manual)