User`s Manual - Digital Hard Disk Recorder
Contents
1. 6 2 Date Time Setup This is to input the date time of DVR system After changing the date time of DVR you must press OK key button on date time menu to activate the date time application System Menu gt Date Time Setup 6 3 Password Setup This is to change the password of DVR system Password configuration can be made with 4 to 8 digit alpha numeric combination System Menu gt System Password Setup 6 4 Network Setup Select the appropriate network type from the network setup menu Select the network type among STATIC DHCP PPPoE to fit to the appropriate network environment where the DVR system is installed Network setup menu 6 5 Recording You can enter into recording setup and select the details Firstly select the resolution Available resolution choices are 720x480 720x240 360x240 NTSC and 720x576 720x288 360x288 PAL Audio recording option recording quality per channel are available as well Especially we have adopted ALL concept which you can control 4 channels at the same time Recording qualities are Enhanced Normal Fine and Super Fine 4 options Recording speed is up to 120 fps NTSC and 100 fps PAL In this category the user can set up the individual options per channel or the same application to all channels at his own convenience Finally the user can also select recording condition Recording Condition Setup Recording conditions are composed of MANUAL CONTINUOUS MOTION SENSOR MOTION S2. User s Manual Digital Hard Disk Recorder 1 Warning Safety Instruction 1 1 Warning Warning Please follow instruction to prevent any kind of damage or loss If you do not follow this instruction it might bring severe damage or loss The symbol is intended to alert the user to the presence of important operating and maintenance servicing instructions in the literature accompanying the unit The symbol is intended to alert the user to the presence of uninsulated dangerous voltage within the product s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons RISK OF ELECTRIC SHOCK t DO NOT OPEN e CAUTION TO REDUCE THE RISK OF ELEC TRIC SHOCK DO NOT REMOVE COVER OR BACK NO USER SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALI FIED SERVICE PERSONNEL CAUTION To prevent electric shocks and risk of fire hazards do NOT use other than specified power source Warning This equipment has been tested and found to comply with the limits for a Class A digital device pursuant to part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instruction manual may cause harmful interference to radio communications Operation
3. connection DSUB 25 male connector 4 VGA e VGA This port exports the same video output signal under VGA signal standard 5 AUDIO IN OUT e IN Audio Line Input port e OUT Audio Line Output port 6 VIDEO IN OUT e CAMERA Camera input port Input signal is CVBS e VIDEO OUT Video output port Output signal is CVBS 7 DC 12V e DVR power supply port DC12V 3 5A User s Manual 6 Basic Operation 6 1 Power ON OFF Power ON When connecting power cable power LED light on front panel of DVR turns to red color and this means that the DVR is on stand by mode and ready for power on At this moment when pressing power key button on front DVR power LED light turns into green color showing the DVR power is actually on When DVR booting process is completed OSD On Screen Display menu is displayed on screen At the same time you can hear the buzzer sound alerting that DVR booting process is completed But OSD menu with ON setting features only will be displayed Once the OSD menu is displayed on the screen it means the DVR booting process is normal Now the user can manipulate the DVR at his convenience Power OFF When powering off the DVR system please press the power key button on front panel of DVR Then you will see the password input dialog box pop up for your password input Default 111111 to turn off the DVR system Afterward the power LED display on front panel of DVR becomes red color showing stand by mode
4. of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at its own expense Caution Any changes or modifications in construction of this device which are not expressly approved by the party responsible for compliance could void the user s authority to operate the equipment Caution Danger of explosion if battery is incorrectly replaced Replace only with the same or equivalent type Warranty will be made void if the product is disassembled or manipulated by the user User s Manual 1 2 Safety Instructions 1 Read these instructions 2 Keep these instructions 3 Heed all warnings 4 Follow all instructions 5 Do not use this apparatus near water 6 Clean only with dry cloth 7 Do not block any ventilation openings Install in accordance with the manufacturer s instructions 8 Do not install near any heat sources such as radiators heat registers stoves or other apparatus including amplifiers that produce heat 9 Do not defeat the safety purpose of the polarized or grounding type plug A polarized plug has two blades with one wider than the other A grounding type plug has two blades and a third grounding prong The wide blade or the third prong is provided for your safety If the provided plug does not fit into your outlet consult an electrician for replacement of the obsolete outlet 10 Protect the pow
5. ENSOR SCHEDULE and CONTINUOUS EVENT When the recording condition is met according to selected recording mode then the red colored icon on top right corner of each channel on screen is displayed only when the video signal is available Whenever the Record button on MANUAL recording is pressed recording goes ON OFF 6 6 Playback Direct Playback by using PLAY button When pressing PLAY button DVR starts the playback according to the playback setting condition of selected channel playback starting point and audio playback option Audio Playback In case of running the recorded video data file with audio link included then the audio plays back automatically The decision of audio link can be selected on audio connection menu 6 7 Search Search Mode DVR provides 3 types of Search Modes User s Manual e Calendar Search For easy search of recorded data DVR provides the calendar search format e Event Search This shows the recorded data list generated by SENSOR MOTION and SCHEDULE e Captured Still Image Search This shows the separate list of still images captured during playback e Search Method e Calendar Search By pressing Search button 3 different Search modes comes up Among these 3 modes please select Calendar search menu Calendar search selection calls up the Year Month Day window Once you select the Year Month Day then the hour minute window comes up Once you select the hour minute all channels on this
6. You can register the users up to 14 accounts on top of provided ADMIN USER_1 USER_5 accounts For the first time setup only ADMIN account has the following default password The other users accounts are to be activated only when you set up each user s password in advance e ID ADMIN e Password 111111
7. aming MAX 120fps NTSC 100fps PAL CIF e JPEG Codec for Network Streaming The resolution quality and FPS are same as Main Codec Recording Resolution 720x480 720x240 360x240 NTSC 720x576 720x288 360x288 PAL Recording Quality 4 Levels Normal Enhanced Fine Super Fine Max Display Speed 120fps NTSC 100fps PAL Max Recording Speed 120fps at Full D1 NTSC 100fps at Full D1 PAL 1 2 3 4 5 6 8 10 15 30 NTSC 10 Steps 1 2 3 4 5 7 9 13 20 25 PAL 10 Steps pce ene Calendar Event Sensor Motion Detection x1 x2 x4 x8 x16 x32 x64 x128 Field by Field Forward Reverse x1 4 x1 2 Forward only 4 NO NC Selectable 1 NO NC 4 TTL 10 100Base T Static DHCP PPPoE E mail DDNS server available 22x15 NTSC 22x18 PAL 8 Level Sensitivity USB Ver2 0 Network Still Image Backup RS 232 TTL Level Console Seeing Video Loss Power On Off HDD Full REC Warring REC Fail y 8 Menu Called Reset HDD Format Reset SW Upgrade Email Fail Korean English Japanese French Spanish German Language Polish Italian Russian Slovak Turkish Czech Software Upgrade Network USB Memory Stick Free Voltage 100 240VAC 50Hz 60Hz 42W using Adaptor 12VDC Dimension 280 W x 290 D x 55 H Operating Temperature 5 C 40 C Weight Net 3Kg net Table 1 DVR Standard e Above specification features of the product are subject to change without prior notice User s Manual 3 A
8. ccessories e DVR e Power Cable e PTZ AUX ALARM SENSOR INPUT DSUB 25 CONNECTOR IEA e DVR assembly and other screws User s Manual Remote Controller Option Software CD RAMS_H264 UniPlayer_ H264 QuickInstaller_H264 MultiViewer_ H264 Manual 4 Front Key Functions CF x K 2 nal ie OPR Ne H Figure 1 4CH DVR Front 1 Numeric button channel switching button e Numeric button This button is to be used for inputting network IP address password on dialog box display and channel selection on live mode or playback mode e MULTI e 4CH DVR e LIVE This is to be used to go back to quad screen after selecting specific channel by using channel selection button e PLAYBACK This is to be used to go back to quad screen after selecting specific channel by using channel selection button SEQ e 4CH DVR This is to be used for the sequential display of all channels that video input is recognized on live mode Pressing SEQ button shows sequential screen display per channel Also it can be used to free all area from motion detection area setting menu 2 Function button e POWER This is to turn on and off the system power DVR has Soft Power solution that when pressing Power button you re asked to input Password to shut down the power for security reasons The prevention of user s mistake You can s
9. ck On PTZ control mode this key button is to be used to lower the controlling speed STOP This key button allows you to stop the playback PLAY This is a playback start button and it initiates the playback of pre selected channel starting file and or audio when it s pressed during live mode On live mode PAUSE status this button resumes the playback In case of PTZ controlling mode it can be used to increase the controlling speed On still image viewing menu it is also being used for image back up PAUSE This key button freezes the playback mode until it s pressed again Direction selection button UP On menu status this key button can be used to select the detailed item by moving the cursor upward On PTZ controlling status this key button can be used to move the camera upward or to near the focus On playback mode this key allows you to switch the channel DOWN On menu status this key button can be used to select the detailed item by moving the cursor downward On PTZ controlling status this key button can be used to move the camera downward or to make the focus far away On playback mode this key allows you to switch the channel LEFT On menu status this key button can be used to change the setting value On PTZ controlling status this key button can be used to move the camera left direction or to make the Zoom wide On playback mode this key allows you to lower the plaback speed RIGHT On menu status th
10. elect it from the menu User s Manual LOCK This is to prevent any unwanted system manipulation by unauthorized personnel Pressing this key one time DVR turns into locking status Afterward any key touch will call up the password input dialog box Key lock will be released only when you input the correct password ZOOM This is to be used to zoom in or zoom out the specific display area on live mode FRZ Freeze This is to pause the display screen on live mode Pressing this key button one more time lets you go back to previous mode MISC e MISC Miscellaneous This key supports the missing key buttons that are available on remote controller i e NET OSD Audio Mute HDD Log SEARCH This is to search the video data files that are recorded on HDD PTZ Pan Tilt Zoom This key button allows you to enter Pan Tilt Zoom Focus mode Pressing this key button one more time lets you go back to previous live display mode MENU This is to initiate the System Configuration Menu If you are already in progress of several steps of menu control this key lets you go back to previous upper menu Button for Recording Playback RECORD This key button initiates the forced recording except the continuous recording mode Pressing this key button makes all live video channels start recording and pressing it one more time stops the recording R PLAY Reversed Play This is to initiate the reversed playback during forward playba
11. er cord from being walked on or pinched particularly at plugs convenience receptacles and the point where they exit from the apparatus 11 Only use attachments accessories specified by the manufacturer 12 Use only with the cart stand tripod bracket or table specified by the manufacturer or sold with the apparatus When a cart is used use caution when moving the cart apparatus combination to avoid injury from tip over 13 Unplug this apparatus during lightning storms or when unused for long periods of time 14 Refer all servicing to qualified service personnel Servicing is required when the apparatus has been damaged in any way such as power supply cord or plug is damaged liquid has been spilled or objects have fallen into the apparatus the apparatus has been exposed to rain or moisture does not operate normally or has been dropped 15 The apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids such as vases shall be placed on the apparatus 16 The mains plug is used as the disconnect device The disconnect device shall remain readily operable 2 Specification Contents 4ch DVR Video System NTSC PAL Selectable System Multi Tasking Quadplex Video Input 4CH Composite BNC User s Manual Contents 4ch DVR Video Output 1CH Composite BNC 1CH VGA Video Compression H 264 Semi Triple Streaming e H 264 Main Codec for recording Streaming e H 264 Codec for Network Stre
12. is key button can be used to change the setting value On PTZ controlling status this key button can be used to move the camera right direction or to make the Zoom Tele On playback mode this key allows you to increase the plaback speed OK On menu status this key is being used to confirm and execute the selected function and on PTZ controlling mode it s being used to switch Pan Tilt mode and Zoom Focus mode IR Reception This is to accept the IR data from the remote controller User s Manual 6 LED Display e POWER It shows red light on when the system is on stand by mode and green light on when the system is in operation mode e REC Green light flickering on recording mode 7 Front USB port This USB port is to be used to back up the video data or captured still image from HDD Also this USB port supports USB mouse controlling for easy DVR operation with front input location advantage 5 Rear Panel Fucntions MOUSE ETHERNET EXTENSIONPORT _ R amon gp _ caera hob amp amp bb Figure 2 4CH DVR REAR PANEL i 1 MOUSE e USB input port to back up video data from HDD e By connecting USB mouse you can control DVR with ease 2 ETHERNET e 10 100 Base T network connection port RJ 45 3 EXTENSION PORT e RS 485 port to connect AUX out control Alarm control Sensor connection RS 232 TTL Level PTZ
13. r Kernel file to upgrade from Menu gt System Setup gt Software Upgrade 5 The DVR recognizes USB memory stick and starts upgrading automatically After upgrade the DVR starts re booting e By using the PC Client program RAMS_H264 the user can upgrade Ramdisk or Kernel software See attached manual on enclosed CD 6 10 Client Program e RAMS_H264 Remote Access Monitoring System H 264 This program enables you to connect to DVR remotely by network and to monitor live video to search the recorded data on DVR and to back up the data onto user s PC User s Manual e UniPlayer_H264 This program enables you to play the video data files recorded from RAMS captured files and backed up files e MultiViewer_H264 This program enables you to monitor multiple DVRs QuickInstaller_H264 This program enables you to retrieve the setting parameter data from the DVR by connecting serial port or network and to save the changed parameter setting value data into DVR e Unimap This program enables you to monitor live video and shows the real time status of DVR where the actual cameras location is indicated on map image e MobileViewer This program enables you to monitor live video and the status of DVR by using mobile devices like PDA or Smart Phone that support wireless internet connection e iPhoneViewer This program enables you to monitor live video and the status of DVR by using iPhone device 7 Basic ID Password
14. time frame will start playing back e Event Search By pressing Search button 3 different Search modes comes up Among these 3 modes please select Event search menu After selecting date time and channel list window will come up Please input the preferred time frame and channel and press OK button for playback e On Search list page movement is available by left and right arrow key and for the up down movement in the same page please use up down arrow key 6 8 Back up e USB Memory Stick e By connecting USB memory stick into USB port you can back up the data manually The user can back up the video data from HDD to USB device by using System setup gt Backup menu e After connecting USB memory stick to USB port and selecting Backup time selection gt Backup start on Backup menu it starts back up operation within the capacity of USB memory stick e By keeping SimplePlayer program in USB memory stick where the backup video data is located the user can execute the playback at any time e Network e By using network from remote site the user can transfer the video and audio data from DVR HDD to user s PC for back up 6 9 Software Upgrade e By using USB memory stick the user can upgrade the Ramdisk and Kernel software of DVR 1 You can download Kernel or Ramdisk file to upgrade 2 Copy the downloaded file into USB memory stick 3 Plug USB memory stick into USB port located on front or rear panel of DVR 4 Select Ramdisk o
Download Pdf Manuals
Related Search