Home

Hampton Bay 22061-010 Installation Guide

1. QUESTIONS PROBLEMS MISSING PARTS Before returning to your local Home Depot please call our Customer Service Team at 1 877 527 0313 or visit www homedepot com Please reference your SKU 611 890 or UPC 773546224789 CAUTION 1 Before starting installation of this fixture or removal of a previous fixture disconnect the power by turning off the circuit breaker or by removing the fuse at the fuse box 2 CONSULT A QUALIFIED ELECTRICIAN IF YOU HAVE ANY ELECTRICAL QUESTIONS 3 If you have any non electrical questions about this fixture please contact our Customer Service Team at 1 877 527 0313 or visit www homedepot com Please reference your SKU 611 890 or UPC 773546224789 4 Keep your receipt and these Instructions for Proof of Purchase Page 2 INSTALLATION Ground Wire 1 Junction Box not included 2 Wire Nut x3 White Wire Black Wire 4 Universal 5 Ground Screw Cross Bar 8 Mounting 14 Lock Nut Screw x2 3 Outlet Box Screw x2 Figure 1 ei iii i i Ol 7 N WHITE OR RIBBED W WHITE OR RIBBED FROM HOUSE FROM FIXTURE BLACK OR RED WIRE FROM HOUSE l l l BLACK OR SMOOTH l FROM FIXTURE l GROUND WIRE W GROUND WIRE FROM HOUSE FROM FIXTURE ADDITIONAL PARTS FOR INSTALLATION included Oy 2 Wire Nut x3 3 Outlet Box 4 Universal Cross 5 Ground Screw Screw x2 Bar B 14 Lock Nut 7 Finishing Nut 8 Mount
2. TROUBLESHOOTING et Possible Cause Corrective Action 1 Bulb is burned out 1 Replace light bulb Bulb will not light 2 Power is off 2 Make gi ea supply 3 Faulty wire connection 3 Check wiring Crossed wires or power wire is grounding out Fuse blows or circuit breaker trips when light is turned on Check wire connections PRODUCT MAINTENANCE 1 To clean the outside of the fixture use a dry or slightly dampened clean cloth use clean water never a solvent to wipe the shade and surface of the fixture 2 To clean the inside of the fixture first disconnect power to the fixture by turning off the circuit breaker or by removing the fuse at the fuse box Next use a dry or slightly dampened clean cloth use clean water never a solvent to wipe the inside shade and interior surface of the fixture 3 Do not use any cleaners with chemicals solvents or harsh abrasives Use only a dry soft cloth to dust or wipe carefully LIMITED WARRANTY The manufacturer warrants this lighting fixture to be free from defects in materials and workmanship for a period of five 5 years from date of purchase This warranty applies only to the original consumer purchaser and only to products used in normal use and service If this product is found to be defective the manufacturer s only obligation and your exclusive remedy is the repair or replacement of the product at the manufacturer s discretion provided that the product has not been damaged
3. ing Screw x2 x2 6 Canopy INSTALLATION INSTRUCTIONS 1 Turn off power at main fuse box 2 Mount universal cross bar 4 to junction box 1 with outlet box screws 3 Make sure black and white wires of junction box 1 run through the middle opening of the universal cross bar 4 3 Fasten open end of ground wire bar copper or green wire to ground wire or ground screws 5 of junction box 1 or ground screws 5 on universal cross bar 4 Refer to Figure 1 4 Connect black wire of power supply to lack wire of the fixture and connect the white wire of the power supply to the white wire of the fixture Refer to Figure 1 NOTE Always use wire nuts 2 or marrettes included to connect wire and push all excess wire and connection back into junction box 1 5 Mount canopy 6 over universal cross bar 4 and tighten with 2 finishing nuts 7 Page 6 TOOLS REQUIRED FOR ASSEMBLY amp INSTALLATION not included PF SS SS Fs Safety goggles Wire Strippers Wire Cutters Flathead Screwdriver 0 Phillips Electrical Tape Ladder B10 Bulb 60W max Screwdriver not included x3 ADDITIONAL PARTS FOR ASSEMBLY included ga J 9 Center Threaded 10 Bottom 11 Decorative 12 Decorative Column Threaded Nipple Spacer Finial Page 3 ASSEMBLY INSTRUCTIONS ASSEMBLY 1 Carefully unpack the fixture lay out all parts on a clean surface 2 Tighten center threaded column 9 on
4. through misuse abuse accident modifications alterations neglect or mishandling This warranty shall not apply to any product that is found to have been improperly installed set up or used in any way not in accordance with the instructions supplied with the product This warranty shall not apply to a failure of the product as a result of an accident misuse abuse negligence alteration or faulty installation or any other failure not relating to faulty material or workmanship This warranty shall not apply to the finish on any portion of the product such as surface and or weathering as this is considered normal wear and tear The manufacturer does not warrant and specially disclaims any warranty whether express or implied of fitness for a particular purpose other than the warranty contained herein The manufacturer specifically disclaims any liability and shall not be liable for any consequential or incidental loss or damage including but not limited to any labor expense costs involved in the replacement or repair of said product Page 8 INSTRUCTION MANUAL INTERIOR 3 LIGHT SEMI FLUSHMOUNT OAKURA HOME DEPOT SKU 611 890 UPC 773546224789 OAK LEAF FINISH Page 1 Thank you for purchasing this Hampton Bay interior decorative lighting This product has been manufactured with the highest standards of safety and quality FEATURES This flushmount accentuates a classical baroque style compatible for traditional and modern homes
5. to the hub of the fixture body 13 3 Secure bottom threaded nipple 10 to the base of the fixture body 13 VIZ NIZ NIZSI Ri af 6 Canopy oe 7 Finishing Nut x2 9 Center Threaded Column 4 Place decorative spacer 11 over the bottom threaded nipple 10 then secure as sembly by installing decorative finial 12 Do not over tighten B10 Bulb 60W x3 not included SHADE AND BULB INSTALLATION 1 Install 60W max B10 bulbs not included 13 Fixture Body _ 10 Bottom Threaded Nipple od 11 Decorative Spacer 12 Decorative Finial Page 4 Page 5

Hampton Bay 22061-010 Installation Guide

Contents

Download Pdf Manuals

Related Search

Related Contents