User Manual
Contents
1. Enable all the alarm reporting C15 Set defensive time Keyword Defensive Command defensive n Description The device will be armed after 3minutes when ACC was off User could set this time N minutes Notice In armed status the towing alarm auto central lock and side door wire trigger will be enabled User could check the status with command status Example Command defensive 0 Disable auto arm function Command defensive 2 System will be armed in 2 minutes after ACC off C16 Set anti steal door trigger Keyword Antisteal Asl Command antisteal n or asl n Description 11 In armed status if some open the door without turn on ACC The device will send out alarm The default time is 120 seconds This command is to set the door trigger Example Sending antisteal 0 Disable this function sending antisteal 120 Set the time as 120 seconds C17 Antisteal input select Keyword Aslis Command aslis n Description Some user need the tracker device work with existing car alarm For ET101B and ET007B user could connect the blue wire side door trigger with the existing car alarm siren positive and send this command to redefine it Then when the existing car alarm siren beeping the device will get the signal and send our alarm to user or server center Example sending aslis O side door trigger sending aslis 1 existing car alarm C18 Set over speed alarm Keyword2. and tracking C8 Locate coordinates Keyword Position Pos Command position or pos Description User sends SMS to locate the vehicle The feedback is including coordinates soeed and a web link User could get the position on Google map with the coordinates Or he could use the link with cell phone to see the map For more information please refer to locate with Google Example 22 5 2583 113 855972 0km h http www gogps mobi tracker asp Ing 113 855972 amp lat 22 572583 amp key 550 C9 Locate address Keyword Position2 Pos2 Command position2 or pos2 Description User sends SMS to locate the vehicle The feedback is not coordinates but address This function needs local agent support 9 C10 Set tracking mode Keyword Track Trk Command track n m or trk n m Description With this command the device could send the position information automatically User could set the interval as time or distance Mes the interval is time n seconds Min 30 seconds M d interval is distance n meters Min 300 meters Example Command track 300 s every 300 seconds device send position back Command track 300 d every 300 meters device send position back 3 Request Status C11 Request Status Keyword Status Sts Command status or sts Description User could use this command to request the status of the device Power 12 45 V GPS OK no signal ACC Open close Door Open close GSM Sign
3. GPS Vehicle Tracking Device User Manual Vehicles IN YOUR HAND Model 101B C101B Thank you for choosing our products We will make every effort to your security 101B support GSM network C101B support CDMA network V3 03 updated on 2009 7 13 Table of Contents D OVEIWIOW 25sec harccdeieci caren a a de eecienesed IE eA SG 111 1512113110 a a a 1 Getting started 2 Install to vehicle 3 Wiring Diagram and Physical 4 Tips BV SMS ok setting SMS locating and tracking Request Status Listening in Fuel control Alarm settings Geo fencing Extra command So Se Wy eo Cate WIN GOO GUE zeresan on N VI Tracking WITRSOMWANG fiicctcaicotn ura de Ghia nbechc aie ee ateG lithe euenteale Oeste Vil GPRS T VIN Command EIS Cisececievsces teseetoewcentenoutueseusseeenteeuaesdeensuevures EENEN DGS 7 eee A A oe ene eee ae aera eee en ee er arene meee eee I Overview S a Car Owner you concern about safety and security If you are a business operator you have to concern more productivity Customer service employees and assets We focus in developing and manufacture GPS tracking system and hardware We would like to help you accomplish these You will Know the vehicle s current position anywhere and anytime cimi GFE EPEE You can monitor the vehicles in 24 hours one da
4. al Strong weak 4 Listening in 9 C12 set the listening in number Keyword Listen Lsn Command listen no password or Isn no password Description When user wants to listening in the vehicle he could use master number to dial the device number Second way is to use this command Any phone numbers is available and after the device get the command it will call to this number directly For example Sending listen 5553467 1234 users could listen in with number 5553467 5 Fuel Control C13 Fuel control Keyword Fuel Command fuel n Description This is command can help user to stop or disable the engine When he doesn t want anyone to drive the car or when he wants to stop the running car he can use this command The device 10 will cut off the gas to stop the engine Example sending fuel 0 cut off the gas sending fuel 1 Resume the gas this is default setting Ad Warning It is dangerous for user to stop the running car 6 Alarm setting C14 Set alarm Keyword Alarm Command alarm n Description There s several alarm reports go back to user s cell phone And he could use this command to disable them all If user only wants some of them he could disable by different alarm command Example sending alarm 0 Disable all alarm reporting except SOS alarm and power alarm A This command can not disable SOS alarm SOS alarm will be send out in any settings sending alarm 1
5. ar Are there any special thing notices on the antenna installation GSM signal is fine usually and then you could put GSM antenna the place you like But the GPS antenna need open to sky So place it where as we suggested There are four places please see the picture SOS button can save life User need to attach the SOS button where is easy to press Then when he met some emergency like car crash or robbery he could press the button immediately The hardware will send out the message to the programmed numbers or server center to call for help So please be careful to install this button 3 Wiring diagrams and Physical 101B C101B l Main unit 5 6 5 ANT 9 GSM ANT 6 Harness 3 51M 7 LED 4 Micorphone 8 Battery switch Wi blue input side door W2 Red black S505 W3 Black power W4 Red power W5 Yellow output fuel control Relay i W6 White ACC ma Fuel pump 4 Tips Immobilizer installation Please find out the gas control line in the vehicle And cut off this line and connect the relay as the wiring diagram Please note the red line is close to the engine side and the black once close to gas pump side SMS Jammed sometime too many short messages will be jammed in SIM card So if there s no feedback User could call the SIM card number first to see if there s communication The high building and cloudy weather will affect the GPS signal When I powe
6. d Step 2 Assemble the antennas Connect the GPS and GPS ANT to their plug Keep the GPS antenna where has good condition to receive the signals For example put it outdoor or near the window open to sky Step 3 Power ON User could power the unit with backup battery or extra power Backup battery switch on the button on the main unit Extra power support the power red and black 12V DC When power is on User could see the LED indicator blinking The red show GSM working green shows GPS working At first the RED will blink every second which means it is searching the GSM network After it connected it will blink every three seconds If there s phone call the red will be keeping lighting lf there s GPRS date translating it will blink very fast The green blinking means it got GPS signal Step 4 Set master phone number send the command as the operation explanation to the SIM card number to set user s cell phone as master phone number For example user s cell phone number is 138000138000 The SIM card number in device is 13900139000 User send the SMS master 138000138000 1234 to the number 139000139000 After that the device is ready to work 2 Install to vehicle Where I should place the main unit User could place the main unit any place you need for example under the seat in the trunk or under the dash board Our hardware is black and small size It s easy for user to hide it in the c
7. ill of device as below Command EXECUTE 888 V Locate with Google User could locate the device with cell phone directly User could select three methods to get the vehicle position 1 Get the coordinates and look up in Google map or Google earth For example when user sends the SMS position to the device it will send feedback the as below 14 22 572583 113 855972 0km h htto www gogps mobi tracker asp 7Ing 113 8559728 amp lat 22 572583 amp key 550 User could input the longitude and latitude to search the position as the picture The position will be shown on the Google map it Ole arse ag oan a te i i Jam ipl j fyi poaae PA i s a F _ am n IN e ri Ps dz s h z am A L kp r a e ee i i Th kig Sar T hroma 13896177 pj eS le EE neraman 8 a User could see the website map google com Or download the GOOGLE EARTH software from http earth google com 2 Get the address of the position User could get the address of the position with the command postion2 He will not only get the coordinates but also the address in message But this function need the local agent support please contact with local agent for more information 3 Track with cell phone on map In the feedback there s a link htto www gogps mobi t
8. overspeed Ovd Command overspeed n or ovd n Description sometime user need set a limitation to keep driver safety For example young man who s driving dad s car Example Sending overspeed 80 limitation 80km h C19 Set towing alarm Keyword tow Command tow n Description In armed status when the vehicle has been towed the device will send alarm to users Example Sending Tow 0 disable this function default Sending Tow 1 enable this function C20 Set parking alarm Keyword Parking Pkg Command parking n Description User could set device to remind him how long time the car parked in one place The number is 12 the time from ACC off to sending alarm This function needs hardware support If user doesn t connect the relay he need connect the W6 white to ACC Example Command parking 60 after 60 minutes the car parked in one place the device will send a alarm to user cell phone C21 Power off alarm Keyword Poweroff Prf Command poweroff n or prf n Description There s internal battery in main unit When someone cut off the power the battery supply the power and device will send alarm report to user s cell phone Example Sending poweroff 0 disable this function Sending poweroff 0 enable this function 9 C22 Low voltage alarm Keyword lowpower lpr Command lowpower n or lpr n Description The device could check the vehicle battery When the batte
9. r 0 fuel off fuel n fuel Fuel control 1 fuel on 0 disable Disable Enable alarm Defensive set Defensive set n nminutes si n seconds default100 max255 Antisteal door trigger 0 disable track n m 4 alarm 1 defensive n antisteal n care m i Oo 0 door trigger 17 aslis n Antisteal input select 1 exsiting car alarm n km h gt 20km h 0 disable 18 overspeed n Over speed alarm 1 enable 0 disable Default 19 Tow n Enable towing alarm 1 enable 18 0 disable lowpower n low voltage alarm 1 enable ogeo Out GeoFence n gt 500 meters 30 113 4578 23 1456 60 km h SOS Overspeed Parking Towing alarm feedback In Geofence Out Geofence Power Off Custom1 2 3 4 Alarm IX Specifications Size 80mm 53mm 25mm Weight N W 0 16KG G W 0 61KG Commutation amp Interface 3x input ACC SOS DOOR CHECK 1x output FUEL CONTROL Microphone veined n enable minutes MAX 255 parking n pkg Parking time alarm l 0 disable 0 disable poweroff n prf power off alarm 1 enable 2 GPS Module Chip SRF Star Ill GSC3f LP 7979 Frequency L1 1575 42MHz C A code Channels 20 Update rate 1Hz Sensitivity Tracking 159dBm Cold start 144dBm Acquisition Time Hot start Open Sky lt 1s Hot start Indoor lt 15s Cold Start Open Sky lt 35s Position Accuracy Autonomous lt 10m SBAS lt 5m Max Al
10. r on the device with internal battery found there s no power Please power the device with extra power DC12V with the battery switch on then the battery will recharge After it recharge 4 hours power it only with battery If still no power please contact with local agent got many zeros when locate the vehicle That means there s no GPS signal Please check as follow step by step 1 GPS ANT install ready do not connect it with GSM plug 2 Put the GPS ATN outside and open to sky 3 Change another GPS AIN IV SMS Operation User operates the device by text SMS to device SIM card number Every command has same format begin with end with the content is English word or letters Please note all the commands need be typed in English and are not case sensitive Command format Command abbr parameter1 parameter2 Different phone number has the different authority master number and slave number Master number can operate every function but slave number can not some functions need the hardware support if the command feedback is right but failed to operate please check the connection as the wiring diagram 1 Setting C1 Set master tel No Keyword Master Msr Command master no password or msr no password Description This is the first step to use the device If the user s number is 138712345678 SIM card in the device number is 13712345670 Example sending master 13712345678 1234 or m
11. racker asp Ing 113 8559728 amp lat 22 572583 amp key 550 If your cell phone supports internet connection you could open this website You will get a map with this position 15 VI Tracking with software lf user has many vehicles he could select our software We have four kind of software for different requirements Please refer to software user manual 1 Track with MapTrack_SA Work mode SMS Hardware PC modem tracker Vehicle control Qty 50 Map support Google earth MapInfo Running cost lowest SMS charge 6G MapTrack_SB a M apTrack_CS _ ara an ba E 8 i Mag t h a a ee ee sen saad anne eee ia roe a asm Chane 2 Track with MapTrack_SB Work mode SMS GPRS Hardware PC modem tracker Vehicle control Qty 100 Map support Google earth MapInfo Running cost lower SMS GPRS charge 3 Track with MapTrack_CS Work mode PC workstation as server tracker Hardware PC modem tracker Vehicle control Qty thousands Map support MapInfo Running cost GPRS Charge IP address server charge 16 4 Track with MapTrack_BS Work mode GPRS Hardware PC workstation as server tracker Vehicle control Qty thousands Map support Google map Mapinfo Virtual Earth Running cost GPRS Charge IP address server charge VID GPRS setting v2 08 C Command Function 11018 get serial number O server ip port se
12. ry voltage is too low the device will send alarm to user or server centre Example sending lowpower 0 disable this function sending lowpower 0 enable this function SOS alarm There s panic button for driver to call for help when he met the something emergency When the driver presses this button for two seconds the device will send an alert message Alarm reports All the alarm reports have the same format as below 113 4578 23 1456 60 km h SOS Overspeed Parking Towing In Geofence Out Geofence Power Off Custom1 2 3 4 Alarm Notice In GPRS work mode the alarm status will be stored till the device restart 7 GEO fencing C26 Out GEO fence alarm 13 Keyword outgeo Command outgeo n Description User could set a circle as the current position center N is the semi diameter Example outgeo 1000 Then the user set a 1kl circle with the current position as center When the vehicle left the circle area device will send alarm 8 Extra Command C27 Forward SMS Keyword Forward Command forward content Description User could forward the SMS to other cell phone number and get the reply through the device For example Forward 10086 cxcy It can query bill of device SIM card in china C28 Execute extended command Keyword Execute Command execute command Description This command can execute extended command of device SIM card In some countries user could check the b
13. sr 13 712345678 1234 default password 1234 C2 Set slave tel no Keyword Slave Sliv Command slaveX no or slvX no Description Slave numbers is designed for other users of the same car There are three slave numbers Only the master phone number can set the slave number If others number want to set the slave number it will get the failed feedback The sender must be master number For example to set the second slave number Example Sending slave2 13712345672 or slv2 13712345672 C3 Set password Keyword Password Psd Command password old new or psd old new Description This password is the key to communicate with device It should have 4 numbers default setting is 1234 Example Sending password 1234 56 78 or psd 1234 5678 C4 Load default Keyword Default Dft Command default or dft Description When user want to clear all the settings in the device this command is important Only master number can send it C5 Restart Keyword Restart Command Restart or rst Description User could restart the device without clearing the setting with this command C6 Product S N Keyword Sn Command sn Description Product s n is need when user wants to use GPRS and network C7 Set SMC number Keyword Smc Command smc no Description SMC short message center this number is for SMS service User could check it with cell phone 2 SMS locating
14. t IP address Request setting 1 SMS 2 GPRS 3 work n set work mode 2a GPRS TCP 2b GPRS UDP Request setting APN xxx user psd set APN Request setting User need set the GPRS work mode when tracker works with software All the following steps are after program the master number Step 1 Get s n Every product has s n serial number which is need to register in software Please note the last 8 characters of s n Sending sn Step 2 IP and port Example IP is 211 154 139 226 port is 8868 Sending server 211 154 139 226 8868 Step 3 Work mode The default work mode is SMS User could send the command to change to GPRS mode Sending work 2 Step 4 APN What is APN Access point name APN is the name used to identify a general packet radio 17 service GPRS bearer service in the GSM mobile network The APN defines the type of service that is provided in the packet data connection User could look up local APN from APN list from technology support or contact with operate Sending APN xxx user psd Vill SMS Command List v2 08 command abbr parameter 1 parameter2 e emm me 1 master no psd msr Set master number 2 slavexeno fov Setsvenumoer xaz 4 aeiae 5 resas fe Ren efa fa wess ioca a position2 T local agent support n 0 disable Auto track n seconds meters m s seconds d meters status Request Status 1 listen no password Set listening numbe
15. titude lt 60 000 ft Max Velocity lt 1 000 knots GSM GPRS Module Baud 850 1900 or 900 1800 or 850 900 1800 1900 Working Temperature 30 C 75 C Max 2w GSM850 EGSM900 Max 1w GSM1800 GPRS Class 10 19 CDMA Module Baud Working Temperature Max 0 25 W 800 30 C 75 C 20
16. y and 7 days a week All the status will be report to you including direction soeed running time etc You will get the alarm report from device as soon as possible by cell phone by computer including anti steal over speed power alarm towing parking SOS You can set a special zone for vehicles to alert you if they are enter or leaving this zone You can remote control your vehicle fuel control talk listening in lock unlock the door You can check all the history data which is stored in the system and export the statistics report for mileage alarms Application e Taxi buses management e Special vehicles and heavy trucks Management e Anti theft security system for private vehicles e Asset management e Rent car management e Private car safety and security 7 Part list fens fem E OoOo ae ot anes Harness amp i fe i waterproof magnetic 1 Getting started Before installation please check all the parts in package as the part list and make sure no part mentioned lost If you found there s part lost please contact with local agent Step1 SIM card Use a little stick to press the SIM card button and the frame will come out Put the SIM card inside and keep metal side upward Please make sure that the SMS function of the SIM card is available A Warning Please confirm the power is off during installation of SIM card Or it maybe causes damage to SIM car
Download Pdf Manuals
Related Search