Home

User Manual

1. Leaving the screen fixed on a stationary image for an extended period of time may cause afterimage burn in or defective pixels e f you are not going to use the product for an extended period of time activate power saving mode or a moving picture screen saver Disconnect the power cord from the power socket if you do not plan on using the product for an extended period of time vacation etc e Otherwise a fire may result from accumulated dust overheating an electric shock or electric leakage Use the product at the recommended resolution and frequency e Your eyesight may deteriorate Looking at the screen too close for an extended period of time can deteriorate your eyesight Do not hold the monitor upside down or move it by holding the stand e The product may fall and break or cause a personal injury Do not use humidifiers or stoves around the product e An electric shock or fire may result Rest your eyes for more than 5 minutes for every 1 hour of product use e Eye fatigue will be relieved Do not touch the screen when the product has been turned on for an extended period of time as it will become hot Store the small accessories used with the product out of reach of children Before Using the Product 16 Before Using the Product Exercise caution when adjusting the
2. 4 Press e e to move to the option you want and press a2 5 The selected option will be applied K e When the monitor turns off enters power saving mode or changes input sources Game Mode turns Off even if it is set to On e Ifyou want to keep Game Mode enabled all the time select Always On 3 5 Screen Setup SAMSUNG MAGIC Bright This menu provides an optimum picture quality suitable for the environment where the product will be used K e This menu is not available when Eco Light Sensor is enabled e This menu is not available when Game Mode is enabled Not available when PIP PBP Mode is set to On You can customize the brightness to suit your preferences 3 5 1 Configuring SAMSUNG MAGIC Bright 1 Press any button on the front of the product to display the Function Key Guide Next press D to display the corresponding menu screen 2 Press e e to move to Picture and press 3 C on the product 3 Press to move to MaGiceright and press H C on the product The following screen will appear Set to an optimum Brightness picture quality suitable for the working Contrast environment Sharpness Game Mode v Custom SAMSUNG Bright Standard HATE Upscale are Color Dynamic Contrast e Custom Customize the contrast and brightness as required e Standard Obtain a picture quality suitable for editing documents or using Internet e Cinema Obtain the brightness and sharpnes
3. to move to Display Time and press 37 on the product The following screen will appear Set how long the menu Language window will remain on screen for when it is Display Time not in use Transparenc 8 u v 20 sec 200 sec vy a 4 Press e e to move to the option you want and press a c 5 The selected option will be applied Coordinating OSD 5 3 Transparency Set the transparency for the menu windows 5 3 1 Changing Transparency 1 Press any button on the front of the product to display the Function Key Guide Next press D to display the corresponding menu screen 2 Press e e to move to Options and press 9 on the product 3 Press e to move to Transparency and press H E on the product The following screen will appear Configure the Language English transparency of the menu windows Display Time Transparency vy es 4 Press e to move to the option you want and press 3 c 5 The selected option will be applied 5 Coordinating OSD f1 6 1 Setup and Reset A detailed description of each function is provided Refer to your product for details ECO The Eco Light Sensor and Eco Saving options are displayed on the same menu page so that you can conveniently configure the power saving settings 6 1 1 Eco Light Sensor The Eco Light Sensor feature optimizes the view condition and contributes to power saving by adjusting the s
4. A It is best to set Response Time to Standard or Faster when you are not viewing a movie 3 9 1 Configuring the Response Time 1 Press any button on the front of the product to display the Function Key Guide Next press J to display the corresponding menu screen 2 Press e e to move to Picture and press H C on the product 3 Press e to move to Response Time and press H C on the product The following screen will appear Accelerate the panel HDMI Black Level response rate to make _ video appear more Response Time Standard vivid and natural W Faster Fastest Li kA P 4 Press e e to move to the option you want and press a 5 The selected option will be applied 4 1 Screen Adjustment Image Size Change the picture size A This menu is not available when PIP PBP Mode is set to On and the Size is set to E E PBP Mode 4 1 1 Changing the Image Size 1 Press any button on the front of the product to display the Function Key Guide Next press IJ to display the corresponding menu screen 2 Press e to move to Screen and press 13 c on the product 3 Press e e to move to Image Size and press 3 on the product The following screen will appear In PC mode Choose the size and Image Size Auto aspect ratio of the picture displayed on Y Wide screen PIP PBP gt Cl VE BE e Auto Display the picture according to
5. to move to the option you want and press 3 6 The selected option will be applied 6 Setup and Reset Setup and Reset 6 1 3 Eco Icon Display Configuring Eco Icon Display 7 Press any button on the front of the product to display the Function Key Guide Next press IJ to display the corresponding menu screen 2 Press e e to move to Settings and press 3 c on the product 3 Press e to move to ECO and press t m on the product 4 Press e e to move to Eco Icon Display and press 3 c on the product The following screen will appear Select the ECO Icon Eco Saving Eco Icon Display EI GA n e Off Disable the Eco Icon Display function e On Display the operation status of the Eco sensor as a pop up guide 5 Press e e to move to the option you want and press 9 0 6 The selected option will be applied Notes Eco Light Sensor Activated Eco Light Sensor Activated e If the screen brightness is adjusted according to the ambient light intensity when the Eco Light Sensor is on a pop up as shown above will appear showing the adjusting screen brightness e Ifthe screen becomes brighter as the ambient light becomes brighter the brightness slide bar level will increase with a sun image displayed If the screen becomes darker the brightness slide bar level will decrease with a moon image displayed The brightness slide bar will be displayed for 3 seconds after the sensor activates
6. 5 The selected option will be applied 3 2 Screen Setup Contrast Adjust the contrast between the objects and background Range 0 100 A higher value will increase the contrast to make the object appear clearer NG e This option is not available when MA cBright is in Cinema or Dynamic Contrast mode e This menu is not available when Game Mode is enabled e This menu is not available when PIP PBP Mode is set to On and the Size is set to UM PBP Mode 3 2 1 Configuring Contrast 1 Press any button on the front of the product to display the Function Key Guide Next press J to display the corresponding menu screen 2 Press e e to move to Picture and press 7 c on the product 3 Press e to move to Contrast and press 17 c on the product The following screen will appear Adjust the contrast Brightness level Values closer to 100 mean a bigger Contrast light dark contrast Sharpness Game Mode MAGIcBright Custom RARER nscale or Color gt 4 Adjust the Contrast using the e buttons 5 The selected option will be applied 3 3 Screen Setup Sharpness Make the outline of objects more clear or blurry Range 0 100 A higher value will make the outline of objects clearer A e This option is not available when MA cBright is in Cinema or Dynamic Contrast mode e This menu is not available when AGjeUpscale is in Mode1 or Mode2 e Th
7. The color and the appearance may differ depending on the product and the specifications are subject to change without prior notice to improve the performance BN46 00424A 02 Table Of Contents BEFORE USING THE PRODUCT PREPARATIONS CONNECTING AND USING A SOURCE DEVICE NON 18 18 19 21 23 23 24 26 26 ZAG 28 29 30 Copyright Icons used in this manual Cleaning Securing the Installation Space Precautions for storage Safety Precautions Symbols for safety precautions Electricity and Safety Installation and Safety Operation Correct posture to use the product Checking the Contents Checking the Components Parts Frontal Button Reverse Side Installation Attaching the Stand Installing a Wall mount Kit or Desktop Stand Adjusting the Product Tilt and Height Rotating the Monitor Screen Anti theft Lock MagicRotation Auto Rotating the monitor Before Connecting Pre connection Checkpoints Table Of Contents 30 Connecting and Using a PC 30 Connection Using the DVI Cable 31 Connection Using the DVI HDMI Cable 31 Connection Using the HDMI Cable 32 Connection Using the HDMI DVI Cable 33 Connection Using the DP Cable 34 Connecting to Headphones or Speakers 35 Connecting the Power 36 Tidying Up the Connected Cables 37 Connecting the Product to a PC asa USB HUB 3r Connecting a PC to the Product 37 Utilizing the Product as a USB HUB 39 Driver Installation 40 S
8. e While in the check signal or no signal mode the monitor will not display the OSD 6 Setup and Reset 6 2 Setup and Reset USB Super Charging Charge the battery of a connected source device quickly using the USB 3 0 port on the product 6 2 1 Configuring USB Super Charging Setting USB Super Charging to On during a data transfer will stop the data transfer If you set USB Super Charging to Off the standard charging and data transfer feature will be available High speed charging is possible using the 9544 1 and 99 442 ports only These ports charge devices faster than typical USB ports The speed depends on the connected devices 1 Press any button on the front of the product to display the Function Key Guide Next press D to display the corresponding menu screen 2 Press e e to move to Settings and press 37c on the product 3 Press e e to move to USB Super Charging and press t3 c on the product 4 Press e to move to USB Super Charging USB1 or USB2 and press 1 c on the product The following screen will appear 300 USB Super Charging DisplayPort Ver PC AV Mode Source Detection Key Repeat Time Off Timer USB Super Charging v Off USB1 On USB2 Set the USB Super charging mode Auto Acceleration Set the USB Super charging mode lt a TA a USB Super Charging USB1 USB2 Set the USB Port1 charging On Off iv es a 6 Setup and Reset
9. 80 non condensing Storage Temperature 20 C 45 C 4 F 113 F Humidity 5 96 95 96 non condensing NG Plug and Play This monitor can be installed and used with any Plug and Play compatible systems Two way data exchange between the monitor and PC system optimizes the monitor settings Monitor installation takes place automatically However you can customize the installation settings if desired K Panel Dots Pixels Due to the nature of the manufacturing of this product approximately 1 pixel per million 1ppm may be brighter or darker on the LCD panel This does not affect product performance W4 The above specifications are subject to change without notice to improve quality A This device is a Class B digital apparatus 10 Specifications 195 y Specifications 10 2 PowerSaver The power saving function of this product reduces power consumption by switching off the screen and controlling the power LED status if the product is not used for a specified period of time The power is not turned off in power saving mode To switch the screen back on press any key on the keyboard or move the mouse Power saving mode functions only when the product is connected to a PC that has a power saving function Energy Star Power off Powersaver Test Condition Power saving mode Power button Power Indicator On Blinking Off Power Consumption Typical 0 45 W Typical 33 W
10. 86 87 88 88 89 90 90 90 90 93 95 96 97 99 Source Detection Configuring Source Detection Key Repeat Time Configuring Key Repeat Time Off Timer Configuring Off Timer Configuring Turn Off After Reset All Initializing Settings Reset All Information Displaying Information Configuring Brightness Contrast and Volume from the Initial Screen Easy Setting Box Installing the Software Removing the Software Requirements Before Contacting Samsung Customer Service Center Testing the Product Checking the Resolution and Frequency Check the following Q amp A General PowerSaver Standard Signal Mode Table Contact SAMSUNG WORLD WIDE Table Of Contents INDEX 105 105 105 105 106 106 107 Responsibility for the Pay Service Cost to Customers Not a product defect A Product damage caused by customer s fault Others Correct Disposal Correct Disposal of This Product Waste Electrical amp Electronic Equipment Terminology Before Using the Product Copyright The contents of this manual are subject to change without notice to improve quality 2014 Samsung Electronics Samsung Electronics owns the copyright for this manual Use or reproduction of this manual in parts or entirety without the authorization of Samsung Electronics is prohibited Microsoft and Windows are registered trademarks of Microsoft Corporation VESA DPM and DDC are registered
11. CHILE 800 SAMSUNG 726 7864 http www samsung com cl COLOMBIA 01 8000 112 112 http www samsung com co Bogota 600 12 72 COSTA RICA 0 800 507 7267 http www samsung com latin Spanish http www samsung com latin_en English DOMINICA 1 800 751 2676 http www samsung com atin Spanish http www samsung com latin_en English ECUADOR 1 800 10 7267 http www samsung com latin Spanish http www samsung com latin_en English EL SALVADOR 800 6225 http www samsung com latin Spanish http www samsung com latin_en English Appendix 9 Appendix LATIN AMERICA GUATEMALA 1 800 299 0013 http www samsung com latin Spanish http www samsung com latin_en English HONDURAS 800 27919267 http www samsung com latin Spanish http www samsung com latin_en English JAMAICA 1 800 234 7267 http www samsung com NICARAGUA 001 800 5077267 http www samsung com latin Spanish http www samsung com latin_en English MEXICO 01 800 SAMSUNG 726 7864 http www samsung com PANAMA 800 7267 http www samsung com latin Spanish http www samsung com latin_en English PARAGUAY 009 800 542 0001 http www samsung com py PERU 0 800 777 08 http www samsung com pe PUERTO RICO 1 800 682 3180 http www samsung com TRINIDAD amp TOBAGO 1 800 SAMSUNG 726 7864 http www samsung com URUGUAY 000 405 437 33 http www samsung com VE
12. Contrast Sharpness Game Mode MAGI CBright MAGICUpscale Color Green Blue Color Tone Normal Mode1 Gamma Configure color settings Adjust the red saturation level Values closer to 100 mean greater intensity for the color e Red Adjust the red saturation level Values closer to 100 mean greater intensity for the color e Green Adjust the green saturation level Values closer to 100 mean greater intensity for the color e Blue Adjust the blue saturation level Values closer to 100 mean greater intensity for the color e Color Tone Select a color tone that best suits your viewing needs o Cool 2 Set the color temperature to be cooler than Cool 1 a Cool 1 Set the color temperature to be cooler than Normal mode o Normal Display the standard color tone o Warm 1 Set the color temperature to be warmer than Normal mode 3 Screen Setup 48 Screen Setup o Warm 2 Set the color temperature to be warmer than Warm 1 o Custom Customize the color tone LE When the external input is connected through DVI HDMI DP and PC AV Mode is set to AV Color Tone has four color temperature settings Cool Normal Warm and Custom e Gamma Adjust the middle level of luminance o Mode1 o Mode2 o Mode3 4 Press e to move to the option you want and press 0 0 5 The selected option will be applied 3 8 Screen Setup HDMI Black Level If a DVD player or set to
13. Setup and Reset e Off Disable USB Super Charging e On Enable the function to quickly charge a source device connected to the USB 3 0 port 5 Press e e to move to the option you want and press 13 8 6 The selected option will be applied 6 3 Setup and Reset DisplayPort Ver Select your Displayport Displayport 1 1 supports High Bit Rate 1 while 1 2 supports High Bit Rate 2 WZ gt Incorrect settings may cause the screen to go blank If this occurs check the device specifications e Ifthe monitor when set to DVI HDMI or DisplayPort is in power saving mode or is displaying the message Check Signal Cable press the II button to display the On Screen Display OSD You can select 1 1 or 1 2 6 3 1 Configuring DisplayPort Ver 1 Press any button on the front of the product to display the Function Key Guide Next press D to display the corresponding menu screen 2 Press e e to move to Settings and press 3 c on the product 3 Press e e to move to DisplayPort Ver and press t c on the product The following screen will appear 300 USB Super Charging DisplayPort Ver PC AV Mode Source Detection Key Repeat Time Off Timer Select your Displayport Displayport 1 1 supports HBR 1 while 1 2 supports HBR 2 Acceleration gt cv es a 1 1 1 2 4 Press e e to move to the option you want and press 13 08 5 The selected option will b
14. to move to Settings and press Q on the product 3 Press e to move to Key Repeat Time and press 3 C on the product The following screen will appear Configure the response rate of a button when the USB Super Charging button is pressed DisplayPort Ver PC AV Mode wv Acceleration Source Detection Te 2 sec Off Timer KORET Key Repeat Time vy es a e Acceleration 1 sec or 2 sec can be selected If No Repeat is selected a command responds only once when a button is pressed 4 Press e e to move to the option you want and press I 5 The selected option will be applied 6 Setup and Reset 82 6 7 Setup and Reset Off Timer You can set the product to automatically turn off 6 7 1 Configuring Off Timer 7 Press any button on the front of the product to display the Function Key Guide Next press I to display the corresponding menu screen 2 Press e e to move to Settings and press 3 c on the product 3 Press e e to move to Off Timer and press 3 C on the product Oo 4 Press e to move to Off Timer and press The following screen will appear ECO USB Super Charging DisplayPort Ver PC AV Mode Source Detection Key Repeat Time Off Timer Off Timer ff After C on the product Enable or disable the Off Timer Auto Acceleration Enable or disable the Off Timer lt V a e Off Deactivate the off timer
15. 30 90 kHz Vertical Frequency 50 75 Hz Resolution Optimum Resolution 2560 x 1440 60 Hz Maximum Resolution 2560 x 1440 60 Hz If a signal that belongs to the following standard signal modes is transmitted from your PC the screen will automatically be adjusted If the signal transmitted from the PC does not belong to the standard signal modes the screen may be blank even though the power LED turns on In such a case change the settings according to the following table by referring to the graphics card user manual Resolution paan Pana Pa oe a kHz Hz IBM 720 x 400 31 469 70 087 28 322 VESA 640 x 480 31 469 59 940 25 175 MAC 640 x 480 35 000 66 667 30 240 VESA 640 x 480 37 861 72 809 31 500 VESA 640 x 480 37 500 75 000 31 500 VESA 800 x 600 35 156 56 250 36 000 VESA 800 x 600 37 879 60 317 40 000 VESA 800 x 600 48 077 72 188 50 000 VESA 800 x 600 46 875 75 000 49 500 MAC 832 x 624 49 726 74 551 57 284 VESA 1024 x 768 48 363 60 004 65 000 VESA 1024 x 768 56 476 70 069 75 000 VESA 1024 x 768 60 023 75 029 78 750 VESA 1152 x 864 67 500 75 000 108 000 10 Specifications Specifications A e Horizontal Frequency Resolution Pg Pinahiran gir a pk kHz Hz MAC 1152 x 870 68 681 75 062 100 000 VESA 1280 x 720 45 000 60 00
16. 8 10 800 500 55 500 http www samsung com UKRAINE 0 800 502 000 http www samsung com ua Ukrainian http www samsung com ua_ru Russian UZBEKISTAN 8 10 800 500 55 500 http www samsung com ASIA PACIFIC AUSTRALIA 1300 362 603 http www samsung com au CHINA 400 810 5858 http www samsung com HONG KONG 852 3698 4698 http www samsung com hk Chinese http www samsung com hk_en English Appendix 102 Appendix ASIA PACIFIC INDIA 1800 3000 8282 http www samsung com in 1800 266 8282 INDONESIA 0800 112 8888 Toll Free http www samsung com id 021 56997777 JAPAN 0120 327 527 http www samsung com MALAYSIA 1800 88 9999 http www samsung com my NEW ZEALAND 0800 SAMSUNG 0800 726 786 http www samsung com nz PHILIPPINES 1 800 10 7267864 PLDT http www samsung com ph 1 800 8 7267864 Globe landline and Mobile 02 4222111 Other landline SINGAPORE 1800 SAMSUNG 726 7864 http www samsung com sg TAIWAN 0800 32 9999 http www samsung com tw THAILAND 0 2689 3232 http www samsung com th 1800 29 3232 VIETNAM 1800 588 889 http www samsung com MENA ALGERIA 0800 100 100 http www samsung com n africa BAHRAIN 8000 4726 http www samsung com ae English http www samsung com ae_ar Arabic EGYPT 08000 726786 http www samsung com IRAN 021 8255 http www samsung com JORDAN 0800 22273 http www samsung com L
17. Dimmer EI GA n e Brighter Increase the current brightness of the screen e Current Maintain the current brightness of the screen e Dimmer Decrease the current brightness of the screen 5 Press to move to the option you want and press 9 0 6 The selected option will be applied 6 Setup and Reset Setup and Reset 6 1 2 Eco Saving The Eco Saving function reduces power consumption by controlling the electric current used by the monitor panel K e This menu is not available when Ma GicBright is in Dynamic Contrast mode e This menu is not available when Game Mode is enabled e _ This menu is not available when Eco Light Sensor is set Configuring Eco Saving 7 Press any button on the front of the product to display the Function Key Guide Next press J to display the corresponding menu screen 2 Press e e to move to Settings and press 3 c on the product Q9 Press e e to move to ECO and press 7 8 on the product 4 Press e to move to Eco Saving and press 7 c on the product The following screen will appear Adjust the power Eco Light Sensor consumption of the product to save energy Eco Saving v Off Eco Icon Display Minimum Maximum e Off Deactivate the Eco Saving function e Minimum Change the monitor power consumption to 75 of the default level e Maximum Change the monitor power consumption to 50 of the default level 5 Press
18. Do not touch the power plug with wet hands e Otherwise an electric shock may result Insert the power plug all the way in so it is not loose e An unstable connection may cause a fire Connect the power plug to a grounded power socket type 1 insulated devices only e An electric shock or injury may result Do not bend or pull the power cord with force Do not weigh the power cord down with a heavy object e A damaged power cord may cause an electric shock or fire Do not place the power cord or product near heat sources e An electric shock or fire may result Remove foreign substances such as dust around the plug pins and power socket with a dry cloth e Otherwise a fire may result Before Using the Product Do not unplug the power cord when the product is in use e _ The product may become damaged by an electric shock Do not use the power cord for products other than authorized products supplied by Samsung e An electric shock or fire may result Keep the power socket where the power cord is connected unobstructed e If any problem occurs in the product unplug the power cable to completely cut the power to the product Power to the product cannot be completely cut off with the power button Hold the plug when disconnecting the power cord from the power socket e An e
19. Less than 0 45 W S27D850T MAX 0 5 W Power Consumption Typical 0 45 W Typical 46 W Less than 0 45 W S32D850T MAX 0 5 W NG e The power consumption level can vary in different operating conditions or when settings are changed e ENERGY STAR is a US registered mark of the United States Environmental Protection Agency Energy Star power is measured with the test method in the current Energy Star Standard e _ To reduce the power consumption to O W disconnect the power cable Be sure to disconnect the power cable when you will not be using the product for an extended period of time To reduce the power consumption to O W when the power switch is not available disconnect the power cable 10 Specifications 96 y Specifications 10 3 Standard Signal Mode Table A e This product can be set to only one resolution for each screen size to obtain the optimum picture quality due to the nature of the panel Therefore a resolution other than the specified resolution may degrade the picture quality To avoid this it is recommended that you select the optimum resolution specified for the screen size of your product e Check the frequency when you exchange a CDT monitor connected to a PC for an LCD monitor If the LCD monitor does not support 85 Hz change the vertical frequency to 60 Hz using the CDT monitor before you exchange it with the LCD monitor Model Name S27D850T S32D850T Synchronization Horizontal Frequency
20. a protective cloth or After rotating the stand place the cushion on a flat surface Next product upright place the product with the face down on top of the cloth or cushion Rotate the stand body about 90 Caution Do not place your hands inthe Do not put the hand below the Do not hold the product upside swiveling area stand body down only by the stand 1 Preparations 23 Preparations 1 3 2 Installing a Wall mount Kit or Desktop Stand WZ The color and shape of parts may differ from what is shown is Specifications are subject to change without notice to improve quality Before Installation K Power the product off and remove the power cable from the power socket Place a protective cloth or Remove the rear cover by pulling Detach the cover from the back cushion on a flat surface Next the corners in the direction of the of the product in the direction place the product with the face arrows indicated by the arrows down on top of the cloth or cushion Unfasten the screw from the Lift and detach the stand back of the product Preparations Installing a Wall mount Kit or Desktop Stand es Q Attach the wall mount kit or desktop stand here O Wall mount bracket optional Align the grooves and tightly fasten the screws on the bracket on the product with the corresponding parts on the wall mount kit or d
21. be displayed or screen burn in may appear depending on the graphics card This is performed by the Windows operating system and has nothing to do with the product Ifyou do not want the screen to rotate automatically when the monitor is rotated press the Windows and L keys at the same time to lock the Windows operating system If the operating system cannot be locked it is due to the constraints of Windows API and has nothing to do with the product 1 Preparations FIT Preparations 1 5 Rotating the monitor When rotating the monitor the rotation angle is displayed on the monitor screen The on screen display OSD menu items will automatically rotate when the screen rotates DINDO IC oa Caution 1 Ifthe MagicRotation Auto software is not installed on the monitor contents on the screen cannot be rotated The OSD can still rotate by 90 and display properly 2 Once rotated the OSD may appear in a different view mode from the mode before it was rotated 2 1 2 2 Connecting and Using a Source Device Before Connecting 2 1 1 Pre connection Checkpoints e _ Before connecting a source device read the user manual provided with it The number and locations of ports on source devices may differ from device to device e _ Do not connect the power cable until all connections are completed Connecting the power cable during connection ma
22. cable DVI cable optional HDMI DVI cable optional DP cable optional USB 3 0 cable optional Stereo cable optional Wall mount bracket optional Mini DP to DP gender optional 2 SCREW TAPTYPE optional N e Components may vary depending on the country e Recommend to use the HDMI cable and DP cable which is provided by the supplier e The optimal resolution may not be available when using a non high speed HDMI or HDMI DVI cable e _ To ensure the screen displays properly it is recommended to use a DP cable that is DP 1 2 certified or an HDMI cable that is HDMI 1 4 certified 1 Preparations 18 Preparations 1 2 Parts 1 2 1 Frontal Button WZ The color and shape of parts may differ from what is shown Specifications are subject to change without notice to improve quality Function Key Guide MENU SOURCE PIP PBP m ad C u Icons Description The Eco Light Sensor feature optimizes the view condition and O contributes to power saving by adjusting the screen brightness depending on the ambient light intensity Open or close the onscreen display OSD menu or return to the parent menu e OSD control lock Maintain the current settings or lock the OSD control to prevent unintended changes to settings e Enable To lock the OSD control press and hold the TI button for 10 seconds m e Disable To unlock the OSD control press and h
23. e In order to hear the sound when connected to a PC with HDMI to DVI cable please connect audio cable and set PC AV Mode to DVI PC 5 Press e e to move to the option you want and press T C 6 The selected option will be applied 6 Setup and Reset Fy Setup and Reset 6 5 Source Detection You can activate Source Detection K Not available when PIP PBP Mode is set to On 6 5 1 Configuring Source Detection 1 Press any button on the front of the product to display the Function Key Guide Next press ID to display the corresponding menu screen 2 Press e e to move to Settings and press 3 c on the product 3 Press e to move to Source Detection and press 3 c on the product The following screen will appear Decide how input ECO sources will be detected USB Super Charging DisplayPort Ver PC AV Mode Source Detection Key Repeat Time Off Timer lt a O a a e Auto The input source is automatically recognized e Manual Manually select an input source 4 Press e e to move to the option you want and press a 5 The selected option will be applied 6 Setup and Reset 81 6 6 Setup and Reset Key Repeat Time Control the response rate of a button when the button is pressed 6 6 1 Configuring Key Repeat Time 1 Press any button on the front of the product to display the Function Key Guide Next press IJ to display the corresponding menu screen 2 Press e e
24. frequency is also called refresh rate and affects screen flicker Resolution Resolution is the number of horizontal pixels and vertical pixels that form a screen It represents the level of display detail A higher resolution displays a greater amount of information on the screen and is suitable for performing multiple tasks at the same time E g A resolution of 1366 x 768 consists of 1366 horizontal pixels horizontal resolution and 768 vertical lines vertical resolution E g A resolution of 1920 x 1080 consists of 1920 horizontal pixels horizontal resolution and 1080 vertical lines vertical resolution Plug amp Play The Plug amp Play feature allows the automatic exchange of information between a monitor and PC to produce an optimum display environment The monitor uses VESA DDC international standard to execute Plug amp Play Appendix 108 Index B Before Connecting 30 Brightness 41 C Checking the Contents 18 Color 48 Connecting and Using a PC 30 Contact SAMSUNG WORLD WIDE 99 Contrast 42 Copyright 7 Correct Disposal 106 Correct posture to use the product 17 D Display Time 69 DisplayPort Ver 78 E Easy Setting Box 88 ECO 71 G Game Mode 44 General 95 H HDMI Black Level 50 Image Size 52 Information 86 Installation 23 K Key Repeat Time 82 L Language 68 O Off Timer 83 P Parts 19 PC AV Mode 79 PIP PBP 55 Q Q amp A93 R Requirements Before Co
25. may vary depending on the product 2 2 3 Connection Using the HDMI Cable WZ Do not connect the power cable before connecting all other cables es A Ensure you connect a source device first before connecting the power cable HDMI IN T Connect the HDMI cable to the HDMI IN port on the back of the product and the HDMI port on the PC 2 Press 17 3 to change the input source to HDMI A K e f audio is supported the Volume can be adjusted using the e e buttons on the front of the product e _ Provided ports may vary depending on the product Connecting and Using a Source Device 2 2 4 Connection Using the HDMI DVI Cable W4 Do not connect the power cable before connecting all other cables 5 Ensure you connect a source device first before connecting the power cable HDMI IN 7 Connect the HDMI DVI cable to the HDMI IN port on the back of the product and the DVI port on the PC 2 Press 13 03 to change the input source to HDMI Select the PC AV mode for the HDMI source WZ In order to hear the sound when connected to a PC with HDMI to DVI cable please connect audio cable and set PC AV Mode to DVI PC e _ Provided ports may vary depending on the product 2 Connecting and Using a Source Device 32 Connecting and Using a Source Device 2 2 5 Connection Using the DP Cable W4 Do not connect the power cable before connecting all other cables E Ensure
26. product angle or stand height e Otherwise children s fingers or hands may become stuck and injured Tilting the product excessively may cause it to fall and result in personal injury Do not place heavy objects on the product e Product failure or personal injure may result When using headphones or earphones do not turn the volume too high e Having the sound too loud may damage your hearing Correct posture to use the product Use the product in the correct posture as follows e Straighten your back e Allow a distance of 45 to 50 cm between your eye and the screen and look slightly downward at the screen Keep your eyes directly in front of the screen e Adjust the angle so light does not reflect on the screen e Keep your forearms perpendicular to your upper arms and level with the back of your hands e Keep your elbows at about a right angle e Adjust the height of the product so you can keep your knees bent at 90 degrees or more your heels attached to the floor and your arms lower than your heart Before Using the Product Preparations 1 1 Checking the Contents 1 1 1 Checking the Components We e Contact the dealer from whom you purchased the product if any item is missing e _ The appearance of the components and items sold separately may differ from the image shown Components Quick setup guide Warranty card User manual optional Not available in some locations Power
27. scale refers to the medium area between black and white Changing the grey scale through Gamma adjustment will change the medium brightness on the screen Scanning rate Scanning rate or refresh rate refers to the frequency of screen refreshes Screen data is transmitted as it refreshes to display an image although the refreshing is invisible to the naked eye The number of screen refreshes is called scanning rate and is measured in Hz A scanning rate of 60Hz means that the screen refreshes 60 times per second The screen scanning rate depends on the performance of the graphics cards in your PC and monitor Horizontal Frequency Characters or images displayed on the monitor screen consist of numerous dots pixels Pixels are transmitted in horizontal lines which are then arranged vertically to create an image The horizontal frequency is measured in kHz and represents how many times horizontal lines per second are transmitted and displayed on the monitor screen A horizontal frequency of 85 means that the horizontal lines that make up an image are transmitted 85000 times per second The horizontal frequency is indicated in 85kHz Appendix Appendix Vertical Frequency One image is made of numerous horizontal lines The vertical frequency is measured in Hz and represents how many images can be created per second by those horizontal lines A vertical frequency of 60 means that an image is transmitted 60 times per second The vertical
28. screen is blank in PIP PBP mode when the optimum resolution is selected go to Control Panel Display Screen Resolution and click Detect on the PC Instructions are based on Windows 7 If the screen is blank when the resolution is set to the optimum resolution change the resolution to 1280 x 1024 u m All Control Panel keme Display b Screen Resolution el r f Search Contra A Change the appearance of your displays Murbple amaye Show Gemtop onyoni v Trug it Curteetly your man osoiay Connect to a peryector pe pren the A try and tap P Mate text and otter teva larger or mater What Cagla serbags shoud Choose To maximize the picture quality it is recommended to use a graphics card that supports 2K 2560 x 1440 resolution When the PIP PBP function is enabled the resolution may not automatically switch to the optimum resolution due to a compatibility issue between the graphics card and the Windows operating system Set PIP PBP Mode to Off or manually change the resolution to the optimum resolution using the Windows interface Screen Adjustment 4 3 1 Configuring PIP PBP Mode Enable or disable the PIP PBP function 1 Press any button on the front of the product to display the Function Key Guide Next press II to display the corresponding menu screen Press e e to move to Screen and press C on the product Press e e to move to PIP PBP and press C on the product Pres
29. the power socket e Mobile devices should be purchased separately Connecting and Using a Source Device 2 4 Driver Installation A e You can set the optimum resolution and frequency for this product by installing the corresponding drivers An installation driver is contained on the CD supplied with the product Ifthe file provided is faulty visit the Samsung homepage http www samsung com and download the file 7 Insert the user manual CD provided with the product into the CD ROM drive 2 Click Windows Driver 3 Follow the instructions given on the screen to proceed with installation 4 Select your product model from the list of models Select he display adapter on which you wart to intall Me monitor eS Select the monitor which you went to install 5 Go to Display Properties and check that the resolution and refresh rate are appropriate Refer to your Windows OS manual for further details Connecting and Using a Source Device 2 5 Setting Optimum Resolution An information message about setting optimum resolution will appear if you power on the product for the first time after purchase Select a language on the product and change the resolution on your PC to the optimum setting Setup Guide The optimal resolution for this monitor is as follows Sobek kee k x Hz Use the above settings to set the resolution on your PC lt gt Return lt lt O 1 Press e e to mo
30. 0 74 250 VESA 1280 x 800 49 702 59 810 83 500 VESA 1280 x 1024 63 981 60 020 108 000 VESA 1280 x 1024 79 976 75 025 135 000 VESA 1440 x 900 55 935 59 887 106 500 VESA 1600 x 900RB 60 000 60 000 108 000 VESA 1680 x 1050 65 290 59 954 146 250 VESA 1920 x 1080 67 500 60 000 148 500 VESA 2560 x 1440RB 88 787 59 951 241 500 The time required to scan a single line from the left to the right side of the screen is called a horizontal cycle The reciprocal number of a horizontal cycle is called horizontal frequency Horizontal frequency is measured in KHz e Vertical Frequency Repeating the same picture dozens of times per second allows you to view natural pictures The repeat frequency is called vertical frequency or refresh rate and is indicated in Hz 10 Specifications 98 Appendix Contact SAMSUNG WORLD WIDE A If you have any questions or comments relating to Samsung products please contact the SAMSUNG customer care center NORTH AMERICA U S A 1 800 SAMSUNG 726 7864 http www samsung com us CANADA 1 800 SAMSUNG 726 7864 http www samsung com ca English http www samsung com ca_fr French LATIN AMERICA ARGENTINE 0800 333 3733 http www samsung com ar BOLIVIA 800 1 0 7260 http www samsung com BRAZIL 0800 124 421 Demais cidades e http www samsung com br regi es 4004 0000 Capitais e grandes centros
31. BIOS SETUP on the PC Windows Vista Set power saving mode in Control Panel Appearance and Personalization Personalize Screen Saver Settings or BIOS SETUP on the PC Windows 7 Set power saving mode in Control Panel Appearance and Personalization Personalize gt Screen Saver Settings or BIOS SETUP on the PC Windows 8 Set power saving mode in Settings Control Panel Appearance and Personalization Personalize Screen Saver Settings or BIOS SETUP on the PC Refer to the user manual for your PC or graphics card for further instructions on adjustment 9 Troubleshooting Guide 94 v Specifications 10 1 General 9 95 kg MIN 627 4 x 466 3 x 280 mm 9 95 kg Model Name S27D850T S32D850T Panel Size 68 4 cm 81 2 cm Display area 596 7 mm H x 708 48 mm H x 335 6 mm V 398 52 mm V Pixel Pitch 0 2331 mm H x 0 27675 mm H x 0 2331 mm V 0 27675 mm V Power Supply AC 100 240 V 10 96 50 60 Hz 3 Hz Dimensions Without 627 4 x 376 4 x 66 1 mm 741 3 x 441 x 68 5 mm WxHx D Stand 7 1 kg 9 4 kg Naga With Stand MAX 627 4 x 596 3 x 280mm MAX 741 3 x 630 x 280 mm 12 2 kg MIN 741 3 x 500 x 280 mm 12 2 kg VESA Mounting Interface 100 mm x 100 mm 100 mm x 100 mm Wall mount accessory 200 mm x 200 mm Environmental considerations Operating Temperature 10 C 40 C 50 F 104 F Humidity 10 96
32. CE Troubleshooting Guide Issues Solutions There is no image on the screen and the power LED blinks every 0 5 to 1 second The product is operating in power saving mode Press any key on the keyboard or move the mouse to return to normal operating mode Sound issue Issues There is no sound Solutions Check the connection of the audio cable or adjust the volume Check the volume The volume is too low Adjust the volume If the volume is still low after turning it up to the maximum level adjust the volume on your PC sound card or software program Source device issue Issues Solutions A beeping sound is heard when my PC is booting If a beeping sound is heard when your PC is booting have your PC serviced 9 Troubleshooting Guide 92 9 2 Troubleshooting Guide Q amp A Question How can I change the frequency Answer Set the frequency on your graphics card Windows XP Go to Control Panel gt Appearance and Themes Display Settings gt Advanced Monitor and adjust Refresh rate under Monitor settings Windows ME 2000 Go to Control Panel Display Settings Advanced Monitor and adjust Refresh rate under Monitor settings Windows Vista Go to Control Panel gt Appearance and Personalization Personalization Display Settings gt Advanced Settings Monitor
33. MONTENEGRO 020 405 888 http www samsung com NETHERLANDS 0900 SAMSUNG http www samsung com 0900 7267864 0 10 Min NORWAY 815 56480 http www samsung com POLAND 0 801 172 678 http www samsung com pl lub 48 22 607 93 33 catkowity koszt potaczenia jak za 1 impuls wedtug taryfy operatora koszt po czenia wed ug taryfy operatora PORTUGAL 808 20 SAMSUNG 808 20 7267 http www samsung com ROMANIA 08008 SAMSUNG 08008 726 http www samsung com ro 7864 TOLL FREE No SERBIA 011 321 6899 http www samsung com rs Appendix 101 Appendix EUROPE SLOVAKIA 0800 SAMSUNG 0800 726 786 http www samsung com SPAIN 902172678 http www samsung com SWEDEN 0771 726 7864 SAMSUNG http www samsung com SWITZERLAND 0848 SAMSUNG http www samsung com ch 7267864 CHF 0 08 min German http www samsung com ch_fr French U K 0330 SAMSUNG 7267864 http www samsung com CIS ARMENIA 0 800 05 555 http www samsung com AZERBAIJAN 088 55 55 555 http www samsung com BELARUS 810 800 500 55 500 http www samsung com GEORGIA 0 800 555 555 http www samsung com KAZAKHSTAN 8 10 800 500 55 500 http www samsung com GSM 7799 KYRGYZSTAN 00 800 500 55 500 http www samsung com MOLDOVA 0 800 614 40 http www samsung com MONGOLIA 7 800 555 55 55 http www samsung com RUSSIA 8 800 555 55 55 http www samsung com TADJIKISTAN
34. NEZUELA 0 800 100 5303 http www samsung com ve EUROPE AUSTRIA 0810 SAMSUNG http www samsung com 7267864 0 07 min BELGIUM 02 201 24 18 http www samsung com be Dutch http www samsung com be_fr French BOSNIA 051 331 999 http www samsung com BULGARIA 07001 33 11 share cost tariff http www samsung com bg CROATIA 062 SAMSUNG 062 726 786 http www samsung com hr CYPRUS 8009 4000 only from landline http www samsung com gr Appendix 100 Appendix EUROPE CZECH 800 SAMSUNG 800 7267 86 http www samsung com Samsung Electronics Czech and Slovak s r o V Parku 2343 24 148 00 Praha 4 DENMARK 70 70 19 70 http www samsung com EIRE 0818 717100 http www samsung com ESTONIA 800 7267 http www samsung com ee FINLAND 030 6227 515 http www samsung com FRANCE 01 48 63 00 00 http www samsung com fr GERMANY 0180 6 SAMSUNG bzw http www samsung com 0180 6 7267864 0 20 Anruf aus dem dt Festnetz aus dem Mobilfunk max 0 60 Anruf GREECE 80111 SAMSUNG 80111 726 http www samsung com gr 7864 only from land line 30 210 6897691 from mobile and land line HUNGARY 06 80 SAMSUNG 726 7864 http www samsung com hu ITALIA 800 SAMSUNG 726 7864 http www samsung com LATVIA 8000 7267 http www samsung com lv LITHUANIA 8 800 77777 http www samsung com t LUXEMBURG 261 03 710 http www samsung com
35. Position Sound Source Source v HDMI Image Size DisplayPort Contrast e DVI e HDMI e DisplayPort Press e e to move to the option you want and press f7 c The selected option will be applied e The input source for the main screen changes e With the exception of the current input source the other two input sources can be selected e _ The screen may flicker if the input signal is unstable e Ifthe function button description page appears press T T The main screen will switch in the order DVI HDMI DisplayPort 4 Screen Adjustment 60 Screen Adjustment PBP 1 Press any button on the front of the product to display the Function Key Guide Next press ID to display the corresponding menu screen 2 Press e e to move to Screen and press t c on the product Q9 4 Press e e to move to Source and press 3 available in PBP mode Size EE The following screen will appear Press e e to move to PIP PBP and press C amp on the product PIP PBP Mode Size Sound Source Source Image Size Contrast e DVI e HDMI e DisplayPort Select the source for each screen gt Apply Cancel 5 Press e e to choose the left or right external input source 6 Press t c to move to Apply and press t c on the product Pressing e when Cancel is selected will clear the Source settings and display the PIP PBP control me
36. SUDAN 1969 http www samsung com TANZANIA 0685 88 99 00 http www samsung com UGANDA 0800 300 300 http www samsung com ZAMBIA 0211 350370 http www samsung com Appendix 104 Appendix Responsibility for the Pay Service Cost to Customers NG When the service is requested in spite of in warranty we may charge you for a visit from a service technician in the following cases Not a product defect Cleaning of the product Adjustment Explanation Re installation and etc fa service technician gives instructions on how to use product or simply adjusts options without disassembling product e Ifa defect is caused by external environmental factors Internet Antenna Wired Signal etc e Ifa product is reinstalled or devices are connected additionally after installing the purchased product for the first time fa product is reinstalled to move to a different spot or to move to a different house e If customer requests instructions on how to use because of another company s product e If customer requests instructions on how to use the network or another company s program e If customer requests software installation and setup for the product e Ifa service technician removes cleans dusts or foreign materials inside of the product e _ lf customer requests an installation additionally after purchasing a product through home shopping or online A Product damage caused by customer s fault Product damage c
37. The color and shape of parts may differ from what is shown Specifications are subject to change without notice to improve quality SAMSUNG AUDIO OUT AUDIO IN POWER IN HDMI IN DPIN Ss PC IN Port Description Connect the power cord for your monitor to the POWER IN port on i i the back of the product Connects to a source device via a DVI cable Connects to a PC using a DP cable Connects to a PC using a USB cable Connect to a source device using an HDMI cable K This port can only connect to a PC 1 Preparations 21 Preparations Port Description l Connect to a USB device Compatible with a USB cable version 3 0 or lower K High speed charging is possible using the 95 44 1 and 85442 ports only These ports charge devices faster than typical USB ports The speed depends on the connected devices AUDIO OUT Connect to an audio output device such as headphones AUDIO IN Connect to an audio input source using an audio cable 1 3 Preparations Installation 1 3 1 Attaching the Stand A e _ Before assembling the product place the product down on a flat and stable surface so that the screen is facing downwards e The color and shape of parts may differ from what is shown Specifications are subject to change without notice to improve quality Place
38. and adjust Refresh rate under Monitor settings Windows 7 Go to Control Panel gt Appearance and Personalization Display Screen Resolution gt Advanced settings Monitor and adjust Refresh rate under Monitor settings Windows 8 Go to Settings Control Panel Appearance and Personalization Display gt Screen Resolution gt Advanced settings Monitor and adjust Refresh rate under Monitor settings 9 Troubleshooting Guide 93 Troubleshooting Guide Question Answer How can change the resolution Windows XP Go to Control Panel gt Appearance and Themes Display Settings and adjust the resolution Windows ME 2000 Go to Control Panel Display Settings and adjust the resolution Windows Vista Go to Control Panel gt Appearance and Personalization Personalize gt Display Settings and adjust the resolution Windows 7 Go to Control Panel gt Appearance and Personalization Display gt Adjust Resolution and adjust the resolution Windows 8 Go to Settings Control Panel Appearance and Personalization Display Adjust Resolution and adjust the resolution How do set power saving mode Windows XP Set power saving mode in Control Panel gt Appearance and Themes Display Screen Saver Settings or BIOS SETUP on the PC Windows ME 2000 Set power saving mode in Control Panel Display Screen Saver Settings or
39. appear Select the image size PIP PBP Mode for each screen Size Sound Source Source Image Size Contrast In PC mode Image Size Apply Cancel e Auto Display the picture according to the aspect ratio of the each screen input source e Wide Display the picture in full screen regardless of the aspect ratio of the each screen input source 4 Screen Adjustment 64 Screen Adjustment In AV mode Image Size Apply Cancel Lili Ye 4 ee e 4 3 Display the picture of the sub screen with an aspect ratio of 4 3 Suitable for videos and standard broadcasts e 16 9 Display the picture of the sub screen with an aspect ratio of 16 9 e Screen Fit Display the picture of the sub screen with the original aspect ratio without cutting anything off NG e The function may not be supported depending on the ports provided with the product e Changing the screen size is available when the following conditions are satisfied o A digital output device is connected using the DVI HDMI DP cable o The input signal is 480p 576p 720p or 1080p and monitor can display normally Not every model can support all of these signals o This can only be set when the external input is connected through DVI HDMI DP and PC AV Mode is set to AV 5 Press e e to move to the option you want and press 9 0 6 The selected option will be applied Screen Adjustment 4 3 7 Configuring Contrast PIP Adjus
40. aused by customer s mishandling or wrong repair If a product damage is caused by e _ external impact or drop e use of supplies or separately sold product unspecified by Samsung e repair from a person besides an engineer of outsourcing service company or partner of Samsung Electronics Co Ltd e remodeling or repairing the product by customer e using it with incorrect voltage or non authorised electrical connections e not following the cautions in User Manual Others e If product fails by natural disaster lightning fire earthquake flood damage etc e f consumable components are all used up Battery Toner Fluorescent lights Head Vibrator Lamp Filter Ribbon etc K If customer requests a service in case the product has no defect service fee may be charged So please read User Manual first Appendix Correct Disposal Correct Disposal of This Product Waste Electrical amp Electronic Equipment Applicable in countries with separate collection systems This marking on the product accessories or literature indicates that the product and its electronic accessories e g charger headset USB cable should not be disposed of with other household waste at the end of their working life To prevent possible harm to the environment or human health from uncontrolled waste disposal please separate these items from other types of waste and recycle them responsibly to promote the sustainable reuse of mat
41. c on the product Press e e to move to ECO and press 3 c8 on the product Press e e to move to Sensitivity and press H C on the product The following screen will appear Select the sensitivity Eco Light Sensor of ECO light sensor gt Sensitivity Vv High Brightness Level Medium Eco Icon Display EI GA n e High High sensitivity that maximizes the varying level of screen brightness depending on the ambient light intensity e Medium Intermediate sensitivity that sets a varying level of screen brightness between High and Low depending on the ambient light intensity e Low Low sensitivity that minimizes the varying level of screen brightness depending on the ambient light intensity Press e e to move to the option you want and press O The selected option will be applied 6 Setup and Reset Setup and Reset Configuring Brightness Level 1 Press any button on the front of the product to display the Function Key Guide Next press D to display the corresponding menu screen 2 Press e e to move to Settings and press 3 c on the product 3 Press e to move to ECO and press t c on the product 4 Press e e to move to Brightness Level and press 17 c on the product The following screen will appear Select the brightness Eco Light Sensor level of ECO light sensor gt Sensitivity T Brightness Level v Brighter Current Eco Icon Display
42. creen brightness depending on the ambient light intensity K e This menu is not available when Ma GicBright is in Dynamic Contrast mode e This menu is not available when Game Mode is enabled e This menu is not available when Eco Saving is set Configuring Eco Light Sensor 7 Press any button on the front of the product to display the Function Key Guide Next press IJ to display the corresponding menu screen 2 Press e to move to Settings and press 3 on the product 3 Press e to move to ECO and press t c on the product 4 Press e to move to Eco Light Sensor and press H m on the product The following screen will appear Set the ECO mode ECO for saving the power consumption USB Super Charging DisplayPort Ver PC AV Mode Source Detection Auto Key Repeat Time Acceleration Off Timer Select the ECO light Eco Light Sensor sensor mode Eco Saving Eco Icon Display Li v P e Off Deactivate the Eco Light Sensor function e On Automatically adjust the brightness according to the ambient light intensity 5 Press to move to the option you want and press 3 c 6 The selected option will be applied 6 Setup and Reset Setup and Reset Configuring Sensitivity 1 Press any button on the front of the product to display the Function Key Guide Next press II to display the corresponding menu screen Press e e to move to Settings and press i
43. de e This menu is not available when Game Mode is enabled 3 6 1 Configuring SAMSUNG MAGIC Upscale 7 Press any button on the front of the product to display the Function Key Guide Next press II to display the corresponding menu screen 2 Press e e to move to Picture and press 7 c on the product 3 Press e e to move to MacicUpscale and press i c on the product The following screen will appear Enhance picture detail Brightness 100 and vividness Sharpness 60 Game Mode Ey Contrast 15 a v Off MAGICBright UEU Color Comparing with Mode1 Mode2 has a stronger effect 4 Press e e to move to the option you want and press 5 0 5 The selected option will be applied 3 Screen Setup 3 7 Screen Setup Color A detailed description of each function is provided Refer to your product for details Cinema or Dynamic Contrast mode Adjust the tint of the screen This menu is not available when ffagicBright is set to e This menu is not available when Game Mode is enabled Not available when PIP PBP Mode is set to On 3 7 1 Configuring Color 1 Press any button on the front of the product to display the Function Key Guide Next press I to display the corresponding menu screen 2 Press e e to move to Picture and press H C on the product 3 Press e to move to Color and press 7 c on the product The following screen will appear Brightness
44. dth x height Select the icon image if you want to use PIP mode where the optimum resolution of the screen is 1280 x 720 width x height Press e e to move to the option you want and press I 2 The selected option will be applied 4 Screen Adjustment 4 Screen Adjustment 3 3 Configuring Position Select the position of the sub screen from the available options 1 Press any button on the front of the product to display the Function Key Guide Next press II to display the corresponding menu screen Press e e to move to Screen and press 17 C on the product Press e e to move to PIP PBP and press t C on the product Press e e to move to Position and press 7 c on the product The following screen will appear Select the position of PIP PBP Mode the sub screen from the available options Size Position Sound Source Source Image Size Contrast e ee 5 Press e e to move to the option you want and press 9 0 6 The selected option will be applied A K e Not available when PBP is selected e The screen may flicker if the input signal is unstable 4 Screen Adjustment 58 Screen Adjustment 4 3 4 Configuring Sound Source Set which screen you want to hear the sound for 1 5 Press any button on the front of the product to display the Function Key Guide Next press II to display the co
45. e applied 6 Setup and Reset 6 4 Setup and Reset PC AV Mode Set PC AV Mode to AV The picture size will be enlarged This option is useful when you view a movie K e Supplied for the wide models only such as 16 9 or 16 10 e Ifthe monitor when set to DVI HDMI or DisplayPort is in power saving mode or is displaying the message Check Signal Cable press the I button to display the On Screen Display OSD You can select PC or AV 6 4 1 Configuring PC AV Mode 1 Press any button on the front of the product to display the Function Key Guide Next press I to display the corresponding menu screen 2 Press e e to move to Settings and press m c on the product 3 Press e to move to PC AV Mode and press Gc on the product 4 Press e e to move to DVI HDMI or DisplayPort and press 3 c on the product The following screen will appear 300 USB Super Charging DisplayPort Ver PC AV Mode Source Detection Key Repeat Time Off Timer Set to AV to enlarge the picture Auto Acceleration HDMI DisplayPort Select the PC AV mode for the DVI source 6 Setup and Reset Setup and Reset Select the PC AV DVI mode for the HDMI source HDMI DisplayPort v DVIPC lt a vy as a Select the PC AV DVI mode for the DisplayPort source HDMI DisplayPort lt a vy es e Set to PC when connected to a PC e Set to AV when connected to an AV device
46. e device connected to the product is powered on Not Optimum Mode is displayed This message appears when the signal from the graphics card exceeds the maximum resolution or frequency for the product Change the maximum resolution and frequency to suit the product performance referring to Standard Signal Mode Table page 97 The images on the screen look distorted Check the cable connection to the product Refer to 2 2 Connecting and Using a PC The screen is not clear The screen is blurry Remove any accessories video extension cable etc and try again Set the resolution and frequency to the recommended level The screen appears unstable and shaky There are shadows or ghost images left on the screen Check that the resolution and frequency for the PC are within the range of resolution and frequency compatible with the product Next if required change the settings referring to Standard Signal Mode Table page 97 in this manual and the Information menu on the product The screen is too bright The screen is too dark Adjust Brightness and Contrast Screen color is inconsistent Change the Color settings Refer to 3 7 Color The colors on the screen have a shadow and are distorted Change the Color settings Refer to 3 7 Color White does not really look white Change the Color settings Refer to 3 7 Color 9 Troubleshooting Guide
47. e oil such as soybean oil can damage or deform the product Do not install the product in a kitchen or near a kitchen counter Take care not to drop the product when moving it e Otherwise product failure or personal injury may result Do not set down the product on its front e The screen may become damaged When installing the product on a cabinet or shelf make sure that the bottom edge of the front of the product is not protruding e The product may fall and break or cause a personal injury e Install the product only on cabinets or shelves of the right size Before Using the Product 13 Before Using the Product A Warning Put down the product carefully e The product may fall and break or cause a personal injury Installing the product in an unusual place a place exposed to a lot of fine dust chemical substances extreme temperatures or a significant presence of moisture or a place where the product will operate continuously for an extended period of time may seriously affect its performance e Besure to consult Samsung Customer Service Center page 99 before installation if you want to install the product at such a place High voltage runs through the product Do not attempt to disassemble repair or modify the product on your own e An electric shock or fire may result e Contact Samsun
48. ect and use various source devices with the product at the same time A PC cannot connect to multiple source devices at the same time as it has a limited number of input output ports available The HUB feature on the product will improve your work efficiency by allowing you to connect multiple source devices to the USB ports on the product at the same time without connecting them to a PC E S hth LI If multiple source devices are connected to the PC the many cables around the PC may look messy Connecting the devices directly to the product will resolve such inconvenience Connect a mobile device such as an MP3 player or smartphone to the product when connected to a PC This allows you to control the device from the PC or charge the device battery NG e To detect and start a source device faster connect the device to the USB 3 0 port on the product An external mass storage HDD requires an external power supply Be sure to connect it to a power source 2 Connecting and Using a Source Device Connecting and Using a Source Device e High speed charging is possible using the s544 1 and s5442 ports only These ports charge devices faster than typical USB ports The speed depends on the connected devices e _ Battery charging is possible in power saving mode However it is not possible when the product is powered off e _ Battery charging is not possible if the power cable is disconnected from
49. en Options Settings Information Picture o Screen Options Settings Information 7 Information Menu and Others 86 7 2 Information Menu and Others Configuring Brightness Contrast and Volume from the Initial Screen Adjust the Brightness Contrast Volume using the 105 buttons when the initial screen that displays no menu screen is displayed W4 Brightness e This menu is not available when Ma GicBright is set to Dynamic Contrast mode e This menu is not available when Eco Light Sensor is enabled Wg Contrast e This option is not available when MagicBright is in Cinema or Dynamic Contrast mode e This menu is not available when Game Mode is enabled e This menu is not available when PIP PBP Mode is set to On and the Size is set to UM PBP Mode 1 Press any button on the front of the product when no menu screen is displayed to display the Function Key Guide Next press l The following screen will appear Volume Brightness v Contrast L ii ee aY 2 Press the H m button to alternate between the Brightness Contrast and Volume settings 3 Adjust the Brightness Contrast Volume using the e e buttons 7 Information Menu and Others Installing the Software 8 1 Easy Setting Box ki Easy Setting Box Easy Setting Box enables users to use the monitor by partitioning multiple sections 8 1 1 Installing the Software 7 Insert
50. erial resources Household users should contact either the retailer where they purchased this product or their local government office for details of where and how they can take these items for environmentally safe recycling Business users should contact their supplier and check the terms and conditions of the purchase contract This product and its electronic accessories should not be mixed with other commercial wastes for disposal For India Only This product is ROHS compliant For more information on safe disposal and recycling visit our website www samsung convin or contact our Helpline numbers 18002668282 180030008282 Appendix Terminology OSD On Screen Display On screen display OSD allows you to customize on screen settings to optimize the picture quality as required You can change the screen brightness tint size and many other settings using menus displayed on the screen USB HUB You can extend one USB interface to multiple USB interfaces that work independently Gamma The Gamma menu adjusts the grey scale that represents middle tones on the screen Adjusting the brightness brightens the whole screen but adjusting Gamma only brightens the medium brightness Grey scale Scale refers to levels of color intensity that show variations of color change from darker areas to brighter areas on the screen Changes to the screen brightness are expressed with black and white variation and grey
51. esktop stand you want to attach Notes e _ Using a screw longer than the standard length can damage the internal components of the product e The length of screws required for a wall mount that does not comply with the VESA standards may vary depending on the specifications Do not use screws that do not comply with the VESA standards Do not attach the wall mount kit or desktop stand using excessive force The product may get damaged or fall and cause personal injury Samsung shall not be held liable for any damage or injury caused by using improper screws or attaching the wall mount kit or desktop stand using excessive force e Samsung shall not be held liable for any product damage or personal injury caused by using a wallmount kit other than the one specified or from an attempt to install the wall mount kit on your own e Tomount the product on a wall ensure you purchase a wall mount kit that can be installed 10 cm or farther away from the wall e Be sure to use a wall mount kit that complies with the standards e Toinstall the product on a wall using the wall mount kit remove the stand 1 Preparations FIT Preparations 1 3 3 Adjusting the Product Tilt and Height The color and shape of parts may differ from what is shown Specifications are subject to change without notice to improve quality 5 42 20 42 0 130 mm 2 mm e The monitor tilt and height can be adjusted e Hold the top ce
52. etting Optimum Resolution SCREEN SETUP a1 Brightness 41 Configuring Brightness 42 Contrast 42 Configuring Contrast 43 Sharpness 43 Configuring Sharpness 44 Game Mode 44 Configuring Game Mode 45 SAMSUNG MAGIC Bright 45 Configuring SAMSUNG MAGIC Bright 47 SAMSUNG MAGIC Upscale 47 Configuring SAMSUNG MAGIC Upscale 48 Color 48 Configuring Color 50 HDMI Black Level 50 Configuring the HDMI Black Level Settings Table Of Contents SCREEN ADJUSTMENT COORDINATING OSD SETUP AND RESET 51 51 52 54 54 55 56 of 58 59 60 62 66 68 69 69 70 7O 71 71 74 75 76 76 78 78 79 79 Response Time Configuring the Response Time Image Size Changing the Image Size H Position amp V Position Configuring H Position amp V Position PIP PBP Configuring PIP PBP Mode Configuring Size Configuring Position Configuring Sound Source Configuring Source Configuring Image Size Configuring Contrast Language Configuring Language Display Time Configuring Display Time Transparency Changing Transparency ECO Eco Light Sensor Eco Saving Eco Icon Display USB Super Charging Configuring USB Super Charging DisplayPort Ver Configuring DisplayPort Ver PC AV Mode Configuring PC AV Mode Table Of Contents INFORMATION MENU AND OTHERS INSTALLING THE SOFTWARE TROUBLESHOOTING GUIDE SPECIFICATIONS APPENDIX 81 81 82 82 83 83 84 85 85 86
53. evant 06 5777444 English KUWAIT 183 2255 183 CALL http Avww samsung com ae English http www samsung com ae_ar Arabic MOROCCO 080 100 2255 http www samsung com OMAN 800 SAMSUNG 726 7864 http www samsung com ae English http www samsung com ae_ar Arabic Appendix 103 Appendix MENA PAKISTAN 0800 Samsung 72678 http Awww samsung com pk QATAR 800 2255 800 CALL http www samsung com ae English http www samsung com ae_ar Arabic SAUDI ARABIA 920021230 http www samsung com sa SYRIA 18252273 http www samsung com Levant English TUNISIA 80 1000 12 http www samsung com n_africa TURKEY 444 7711 http www samsung com U A E 800 SAMSUNG 726 7864 http www samsung com AFRICA BOTSWANA 8007260000 http www samsung com BURUNDI 200 http www samsung com CAMEROON 7095 0077 http www samsung com africa_fr COTE D IVOIRE 8000 0077 http www samsung com africa_fr DRC 499999 http www samsung com GHANA 0800 10077 http www samsung com africa_en 0302 200077 KENYA 0800 545 545 http www samsung com NAMIBIA 08 197 267 864 http www samsung com NIGERIA 0800 726 7864 http www samsung com africa_en MOZAMBIQUE 847267864 827267864 http www samsung com RWANDA 9999 http www samsung com SENEGAL 800 00 0077 http www samsung com africa_fr SOUTH AFRICA 0860 SAMSUNG 726 7864 http www samsung com
54. g Customer Service Center page 99 for repair Before moving the product turn off the power switch and disconnect the power cable and all other connected cables e Otherwise the power cord may be damaged and a fire or electric shock may result If the product generates a strange noise a burning smell or smoke remove the power cord immediately and contact Samsung Customer Service Center page 99 e An electric shock or fire may result Do not let children hang from the product or climb on top of it e The product may fall and your child may become injured or seriously harmed If the product falls or the exterior is damaged power off the product remove the power cord and contact Samsung Customer Service Center page 99 e Otherwise an electric shock or fire may result Do not put a heavy object toy or sweets on top of the product e _ The product or heavy objects may fall as children try to reach for the toy or sweets resulting in a serious injury Before Using the Product EYE Before Using the Product During a lightning or thunderstorm power off the product and remove the power cable e An electric shock or fire may result Do not drop objects on the product or apply impact e An electric shock or fire may result Do not move the product by pulling the power cord or any cable e Otherwise
55. is input in AV mode and the monitor can display normally select Screen Fit to adjust horizontal position in 0 6 levels e _ Not available when PIP PBP Mode is set to On 4 21 Configuring H Position amp V Position T Press any button on the front of the product to display the Function Key Guide Next press J to display the corresponding menu screen 2 Press e to move to Screen and press 13 08 on the product 3 Press e e to move to H Position or V Position and press 3 8 The following screen will appear Image Size Screen Fit H Position 3 V Position PIP PBP Image Size H Position V Position PIP PBP Move the image displayed on the screen to the left or Move the image displayed on the screen up or down 4 Press e e to configure H Position or V Position 5 The selected option will be applied 4 Screen Adjustment 54 4 3 Screen Adjustment PIP PBP The PIP Picture in Picture function separates the screen into two parts One source device is displayed on the main screen at the same time the another source device is displayed in inset windows The PBP Picture by Picture function separates the screen in half displaying output from two different source devices simultaneously on the left and right sides of the screen Compatible with Windows7 and Windowss The PIP PBP function may not be available depending on the specifications of the graphics card used If the
56. is menu is not available when Game Mode is enabled e Not available when PIP PBP Mode is set to On 3 3 1 Configuring Sharpness 1 Press any button on the front of the product to display the Function Key Guide Next press D to display the corresponding menu screen 2 Press e to move to Picture and press H C on the product 3 Press e to move to Sharpness and press t c on the product The following screen will appear Adjust the sharpness Brightness of the picture Values closer to 100 Contrast mean a sharper image Sharpness Game Mode MAGIGBright SAMSUN Upscale 4 Adjust the Sharpness using the e buttons 5 The selected option will be applied 3 4 Screen Setup Game Mode Configure the product screen settings for game mode Use this feature when playing games on a PC or when a game console such as PlayStation or XboxTM is connected A Not available when PIP PBP Mode is set to On 3 4 1 Configuring Game Mode 1 Press any button on the front of the product to display the Function Key Guide Next press I to display the corresponding menu screen 2 Press e e to move to Picture and press 17 c on the product 3 Press e to move to Game Mode and press Q C on the product The following screen will appear Optimizes image Brightness settings for playing games Contrast Sharpness Game Mode MAGI CBright FAMSYNG Upscale Always On Color
57. lectric shock or fire may result Installation and Safety A Warning DO NOT PLACE CANDLES INSECT REPELLANTS OR CIGARETTES ON TOP OF THE PRODUCT DO NOT INSTALL THE PRODUCT NEAR HEAT SOURCES e Otherwise a fire may result Avoid installing the product in a narrow space with bad ventilation such as a bookshelf or wall closet e Otherwise a fire may result due to an increased internal temperature Keep the plastic packaging bag for the product in a place that cannot be reached by children e Children may suffocate Before Using the Product 12 Before Using the Product Ss S Do not install the product on an unstable or vibrating surface insecure shelf sloped surface etc e The product may fall and break or cause a personal injury e Using the product in an area with excess vibration may damage the product or cause a fire Do not install the product in a vehicle or a place exposed to dust moisture water drips etc oil or smoke e An electric shock or fire may result Do not expose the product to direct sunlight heat or a hot object such as a stove e Otherwise the product lifespan may be reduced or a fire may result Do not install the product within the reach of young children e The product may fall and injure children Edibl
58. lectronics retailers or online 1 4 Preparations MagicRotation Auto The MagicRotation Auto function detects the rotation of monitors that are fitted with a rotation sensor and rotates the Windows screen accordingly Software Installation 1 Insert the user manual CD provided with the product into the CD ROM drive 2 Follow the instructions given on the screen to proceed with installation K After installation the application menu language will be displayed in the language of the operating system This complies with the basic policies of Windows Caution 1 Compatible only with Windows 7 32 bit or 64 bit and Windows 8 32 bit or 64 bit 2 Compatible with a graphics card that complies with the DDC CI and MS API standards With a graphics card that does not comply with the aforementioned standards the MagicRotation Auto function may not be available 3 To maximize the performance of the function update the graphics card driver to the latest version 4 Fourteen languages are available as installation languages English Frangais Deutsch Magyar Italiano Polski Portugu s Pycckn Espanol Svenska T rk e HAE iKiZ SHO 5 Ifthe orientation is set to a mode other than Landscape in the screen resolution menu on Windows 7 the MagicRotation Auto function may not work properly 6 The OSD menu will be displayed if the monitor is rotated When the monitor is rotated the screen reconfiguration process may
59. mer Service Center test your product as follows If the problem persists contact Samsung Customer Service Center Check if your product is operating normally by using the product test function If the screen is turned off and the power indicator blinks even though the product is properly connected to a PC perform a self diagnosis test 1 Power off both the PC and product 2 Disconnect the cables from the product 3 Power on the product 4 If the message Check Signal Cable appears the product is working normally NG If the screen remains blank check the PC system video controller and cable 9 1 2 Checking the Resolution and Frequency For a mode that exceeds the supported resolution refer to 10 3 Standard Signal Mode Table the message Not Optimum Mode will appear for a short time 9 1 3 Check the following Installation issue PC mode Issues Solutions The screen keeps switching on and off Check the cable connection between the product and PC and ensure the connectors are locked Refer to 2 2 Connecting and Using a PC Troubleshooting Guide Screen issue Issues The power LED is off The screen will not switch on Solutions Check that the power cable is connected properly Refer to 2 2 Connecting and Using a PC The message Check Signal Cable appears Check that the cable is properly connected to the product Refer to 2 2 Connecting and Using a PC Check that th
60. n Sound Source Source v 16 9 Image Size Contrast Screen Fit e 4 3 Display the picture of the sub screen with an aspect ratio of 4 3 Suitable for videos and standard broadcasts e 16 9 Display the picture of the sub screen with an aspect ratio of 16 9 e Screen Fit Display the picture of the sub screen with the original aspect ratio without cutting anything off NG e _ The function may not be supported depending on the ports provided with the product e Changing the screen size is available when the following conditions are satisfied o A digital output device is connected using the DVI HDMI DP cable o The input signal is 480p 576p 720p or 1080p and monitor can display normally Not every model can support all of these signals a This can only be set when the external input is connected through DVI HDMI DP and PC AV Mode is set to AV 5 Press e e to move to the option you want and press a 6 The selected option will be applied 4 Screen Adjustment 63 Screen Adjustment PBP 1 Press any button on the front of the product to display the Function Key Guide Next press ID to display the corresponding menu screen 2 Press e to move to Screen and press t c on the product Q9 Press e e to move to PIP PBP and press C on the product 4 Press e e to move to Image Size and press c available in PBP mode Size ME The following screen will
61. ntacting Samsung Customer Service Center 90 Reset All 85 Response Time 51 Responsibility for the Pay Service Cost to Customers 105 Rotating the monitor 29 S Safety Precautions 10 SAMSUNG MAGIC Bright 45 SAMSUNG MAGIC Upscale 47 Sharpness 43 Source Detection 81 Standard Signal Mode Table 97 Index T Terminology 107 Transparency 70 U USB Super Charging 76 Utilizing the Product as a USB HUB 37
62. nter of the product and adjust the height carefully 1 3 4 Rotating the Monitor Screen You can rotate your monitor as shown below WZ gt Adjust the screen following the arrow direction e _ Rotate the screen in clockwise direction till it becomes completely vertical to the desktop e The monitor may get damaged if you rotate the screen without tilt or counter clockwise direction Preparations 1 3 5 Anti theft Lock An anti theft lock allows you to use the product securely even in public places The locking device shape and locking method depend on the manufacturer Refer to the user guide provided with your anti theft locking device for details The lock device is sold separately SAMSUNG 73 W4 The color and shape of parts may differ from what is shown Specifications are subject to change without notice to improve quality To lock an anti theft locking device 1 Fix the cable of your anti theft locking device to a heavy object such as a desk 2 Put one end of the cable through the loop on the other end 3 Insert the locking device into the anti theft lock slot at the back of the product 4 Lock the locking device A e An anti theft locking device can be purchased separately e Refer to the user guide provided with your anti theft locking device for details e _ Anti theft locking devices can be purchased at e
63. nu page lt e The screen may flicker if the input signal is unstable W2 gt Theinput source for the main screen changes e When the input signal of the left and right screens are the same the operation cannot be performed e If the function button description page appears press T T The main screen will switch in the order DVI HDMI DisplayPort 4 Screen Adjustment 61 Screen Adjustment 4 3 6 Configuring Image Size Select the image size for sub screen PIP 1 Press any button on the front of the product to display the Function Key Guide Next press II to display the corresponding menu screen Press e e to move to Screen and press 7 C on the product Press e e to move to PIP PBP and press 9 C on the product Press e e to move to Image Size and press H available in PIP mode Size mj The following screen will appear In PC mode Select the image size PIP PBP Mode for each screen Size Position Sound Source Auto wv Wide Contrast La Yee 4 a Image Size Source Auto Display the picture according to the aspect ratio of the each screen input source e Wide Display the picture in full screen regardless of the aspect ratio of the each screen input source 4 Screen Adjustment 62 Screen Adjustment In AV mode Select the image size PIP PBP Mode for each screen Size Positio
64. old the button for 10 seconds K Ifthe OSD control is locked Brightness Contrast and Volume can be adjusted PIP PBP and ECO are available Information can be viewed Press Eco to display and access the following menu items ESQ e Eco Light Sensor Sensitivity Brightness Level Eco Saving Eco Icon Display 1 Preparations ETE Preparations Icons Description oie Move to the upper or lower menu or adjust the value for an option on the OSD menu Adjust the screen brightness contrast and volume Confirm a menu selection Pressing the O C button when the OSD menu is not displayed will oe change the input source DVI HDMI DisplayPort If you power on the product or change the input source by pressing the 3 button a message that shows the changed input source will appear at the top left corner of the screen Do Press the button when configuring settings for the PIP PBP function is required Q Turn the screen on or off Function Key Guide When a control button on the product is pressed the Function Key Guide will be displayed before the onscreen menu opens The guide shows the function of the button pressed To access the onscreen menu when the guide is displayed press the corresponding button again The Function Key Guide may vary depending on the function or product model Refer to the actual product 1 Preparations FIT Preparations 1 2 2 Reverse Side
65. p box is connected to the product via HDMI image quality degradation contrast color degradation black level etc may occur depending on the connected source device In such case HDMI Black Level can be used to adjust the image quality If this is the case correct the degraded picture quality using HDMI Black Level A e This function is only available in HDMI mode e _ Not available when PIP PBP Mode is set to On 3 8 1 Configuring the HDMI Black Level Settings 1 Press any button on the front of the product to display the Function Key Guide Next press D to display the corresponding menu screen 2 Press e e to move to Picture and press H C on the product 3 Press e e to move to HDMI Black Level and press H C on the product The following screen will appear a fi Optimize HDMI HDMI Black Level Normal picture brightness and contrast by adjusting Response Time parow the black level of the video signal e Normal Select this mode when there is no contrast ratio degradation e Low Select this mode to reduce the black level and increase the white level when there is a contrast ratio degradation 4 Press e e to move to the option you want and press a c 5 The selected option will be applied A K HDMI Black Level may not be compatible with some source devices Screen Setup 3 9 Response Time Accelerate the panel response rate to make video appear more vivid and natural
66. re to contact Samsung Customer Service Center page 99 if the inside of the monitor needs cleaning Service fee will be charged Before Using the Product Safety Precautions Caution RISK OF ELECTRIC SHOCK DO NOT OPEN Caution TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER OR BACK THERE ARE NO USER SERVICEABLE PARTS INSIDE REFER ALL SERVICING TO QUALIFIED PERSONNEL This symbol indicates that high voltage is present inside It is dangerous to make any kind of contact with any internal part of this product N This symbol alerts you that important literature concerning operation and maintenance has been included with this product Symbols for safety precautions A Warning A serious or fatal injury may result if instructions are not followed Personal injury or damage to properties may result if instructions are AN Caution not followed Activities marked by this symbol are prohibited Instructions marked by this symbol must be followed Before Using the Product 10 Before Using the Product Electricity and Safety A The following images are for reference only Real life situations may differ from what is shown in the images A Warning Do not use a damaged power cord or plug or a loose power socket e An electric shock or fire may result Do not plug many products into the same power socket e Otherwise the socket may overheat and cause a fire
67. rresponding menu screen Press e e to move to Screen and press 7 C on the product Press e e to move to PIP PBP and press 3 c on the product Press e e to move to Sound Source and press 17 c on the product The following screen will appear NG The white area of the icon means that the Sound Source comes from the main screen sub screen or the left right screen PIP Set which screen you PIP PBP Mode want to hear the sound for Size Position Sound Source Source Image Size Contrast gt Le mpa PBP Set which screen you PIP PBP Mode On want to hear the sound for Size jun Sound Source vo Source m Image Size Contrast 75 75 gg ua E E Press e e to move to the option you want and press I 2 6 The selected option will be applied 4 Screen Adjustment ET Screen Adjustment 4 3 5 Configuring Source Select the source for each screen N x lt Press any button on the front of the product to display the Function Key Guide Next press II to display the corresponding menu screen Press e e to move to Screen and press C on the product Press e e to move to PIP PBP and press O on the product Press e e to move to Source and press TI c available in PIP mode Size mj The following screen will appear Select the source for PIP PBP Mode each screen Size
68. s e e to move to PIP PBP Mode and press 7 c2 on the product The following screen will appear Configure the settings Image Size Screen Fit for using Picture in Picture Picture by H Position Picture V Position PIP PBP Turn PIP PBP Mode Turn PIP PBP Mode PIP PBP Mode on or off PIP PBP Mode Size Sound Source Source Image Size Contrast e Off On 5 Press e to move to the option you want and press 5 6 6 The selected option will be applied 4 Screen Adjustment 56 Screen Adjustment 4 3 2 Configuring Size Select the size and aspect ratio of the sub screen 1 Press any button on the front of the product to display the Function Key Guide Next press II to display the corresponding menu screen Press e e to move to Screen and press 17 C on the product Press e e to move to PIP PBP and press t C on the product Press e e to move to Size and press T C on the product The following screen will appear sub Select the size and PIP PBP Mode aspect ratio of the sub screen Size Sound Source Source Image Size Contrast lt a vy es a Select the icon image if you want to use PBP mode where the optimum resolution for the left and right sides of the screen is 1280 x 1440 width x height Select the icon image if you want to use PIP mode where the optimum resolution for the sub screen is 720 x 480 wi
69. s of TVs suitable for enjoying video and DVD content e Dynamic Contrast Obtain balanced brightness through automatic contrast adjustment Screen Setup Brightness Contrast Sharpness Game Mode SAMSUNG MAGICBright SAMSUNG MAGICUpscale Color vy ee When the external input is connected through DVI HDMI DP and PC AV Mode is set to AV SAMSUNG MAGIcBright has four automatic picture settings Dynamic Standard Movie and Custom that are preset at the factory You can activate either Dynamic Standard Movie or Custom You can select Custom which automatically recalls your personalized picture settings e Dynamic Select this mode to view a sharper image than in Standard mode e Standard Select this mode when the surroundings are bright This also provides a sharp image e Movie Select this mode when the surroundings are dark This will save power and reduce eye fatigue e Custom Select this mode when you want to adjust the image according to your preferences Press e e to move to the option you want and press IY 2 The selected option will be applied Screen Setup 3 6 SAMSUNG MAGIC Upscale MacicUpscale function can enhance the layers of the picture details and the vividness of the picture K e _ The function has more obvious effects on low resolution pictures e This menu is not available when WAGicBright is in Cinema or Dynamic Contrast mo
70. set Reset All Return all the settings for the product to the default factory settings K The functions available on the monitor may vary depending on the model Refer to the actual product 6 8 1 Initializing Settings Reset All 1 Press any button on the front of the product to display the Function Key Guide Next press ID to display the corresponding menu screen 2 Press e e to move to Settings and press 3 c on the product 3 Press e to move to Reset All and press 3 on the product The following screen will appear Return all the settings Reset All for the product to the default factory settings All the menu settings will be reset to default Are you sure you want to reset 4 Press e e to move to the option you want and press a c 5 The selected option will be applied 6 Setup and Reset 85 7 1 Information Information Menu and Others A detailed description of each function is provided Refer to your product for details View the current input source frequency and resolution Leld Displaying Information Press any button on the front of the product to display the Function Key Guide Next press H to display the corresponding menu screen Press e e to move to Information The current input source frequency and resolution will appear Picture Screen Options Settings DisplayPort Information x Ii gt 1 Picture Scre
71. so that the product does not power off automatically e On Activate the off timer so that the product powers off automatically 5 Press e to move to the option you want and press 3 6 The selected option will be applied 6 Setup and Reset 83 Setup and Reset 6 7 2 Configuring Turn Off After 1 Q 5 6 Press any button on the front of the product to display the Function Key Guide Next press II to display the corresponding menu screen Press e e to move to Settings and press 17 on the product Press e e to move to Off Timer and press T C on the product Press e e to move to Turn Off After and press T C on the product The following screen will appear Set the monitor to Off Timer automatically turn off after a certain time Turn Off After period Press e e to configure Turn Off After The selected option will be applied e The off timer can be set within a range of 1 to 23 hours The product will automatically power off after the specified number of hours e _ This option is only available when Off Timer is set to On e _ For products for the market in some regions the Off Timer is set to automatically activate 4 hours after the product powers on This is done in accordance with power supply regulations If you do not want the timer to activate go to MENU SETUP amp RESET and set Off Timer to Off 6 Setup and Reset 84 6 8 Setup and Re
72. t the contrast level for sub screen 1 Q Press any button on the front of the product to display the Function Key Guide Next press H to display the corresponding menu screen Press e e to move to Screen and press 13 on the product Press e e to move to PIP PBP and press 3 on the product DO Press e e to move to Contrast and press T C available in PIP mode Size me The following screen will appear Adjust the contrast PIP PBP Mode level for each screen Size Position Sound Source Source Image Size Contrast 5 Adjust the Contrast using the e e buttons 6 The selected option will be applied 4 Screen Adjustment 66 Screen Adjustment PBP Adjust the contrast level for each screen 1 5 6 Press any button on the front of the product to display the Function Key Guide Next press II to display the corresponding menu screen Press e e to move to Screen and press 7 on the product Press e e to move to PIP PBP and press 9 on the product Press e e to move to Contrast and press I The following screen will appear C available in PBP mode Size INH Adjust the contrast PIP PBP Mode level for each screen Size Sound Source Source Image Size Contrast u Contrast 75 vo x es ee ee v Adjust the Contrast using the e e bu
73. the aspect ratio of the input source e Wide Display the picture in full screen regardless of the aspect ratio of the input source In AV mode Choose the size and Image Size 4 3 aspect ratio of the picture displayed on v 16 9 screen Screen Fit PIP PBP Iv B a e 4 3 Display the picture with an aspect ratio of 4 3 Suitable for videos and standard broadcasts e 16 9 Display the picture with an aspect ratio of 16 9 e Screen Fit Display the picture with the original aspect ratio without cutting off WZ Changing the screen size is available when the following conditions are satisfied HI e _ The function may not be supported depending on the ports provided with the product 4 Screen Adjustment 52 Screen Adjustment o A digital output device is connected using the DVI HDMI DP cable o The input signal is 480p 576p 720p or 1080p and monitor can display normally Not every model can support all of these signals o This can only be set when the external input is connected through DVI HDMI DP and PC AV Mode is set to AV 4 Press e e to move to the option you want and press 5 0 5 The selected option will be applied 4 2 Screen Adjustment H Position amp V Position H Position Move the screen to the left or right V Position Move the screen up or down K e This menu is only available when Image Size is set to Screen Fit in AV Mode When a 480P or 576P or 720P or 1080P signal
74. the installation CD into the CD ROM drive 2 Select the Easy Setting Box setup program NG If the pop up screen for the software installation does not appear on the main screen find and double click the Easy Setting Box setup file on the CD ROM 3 When the Installation Wizard appears click Next 4 Follow the instructions given on the screen to proceed with installation Ze The software may not work properly if you do not restart the computer after the installation e The Easy Setting Box icon may not appear depending on the computer system and the product specifications Ifthe shortcut icon does not appear press the F5 key Restrictions and Problems with the Installation Easy Setting Box The Easy Setting Box installation may be affected by the Graphics Card Motherboard and the Networking Environment System Requirements Os e Windows XP 32Bit 64Bit e Windows Vista 32Bit 64Bit e Windows 7 32Bit 64Bit e Windows 8 32Bit 64Bit Hardware e Atleast 32MB of memory e Atleast 60MB of free space on the hard disk drive Installing the Software 8 1 2 Removing the Software Click Start select Settings Control Panel and then double click Add or Remove Programs Select Easy Setting Box from the program list and click the Add Delete button 9 1 Troubleshooting Guide Requirements Before Contacting Samsung Customer Service Center 9 1 1 Testing the Product W4 Before calling Samsung Custo
75. the power cable may be damaged and product failure an electric shock or fire may result If a gas leakage is found do not touch the product or power plug Also ventilate the area immediately e Sparks can cause an explosion or fire Do not lift or move the product by the power cord or any cable e Otherwise the power cable may be damaged and product failure an electric shock or fire may result Do not use or keep combustible spray or an inflammable substance near the product e An explosion or fire may result Ensure the vents are not blocked by tablecloths or curtains e Otherwise a fire may result from an increased internal temperature Do not insert a metallic object a chopstick coin hair pin etc or inflammable object paper match etc into the vent or ports of the product e f water or any foreign substance enters the product be sure to power off the product remove the power cord and contact Samsung Customer Service Center page 99 e Product failure an electric shock or fire may result Do not place objects containing liquid vases pots bottles etc or metallic objects on top of the product e If water or any foreign substance enters the product be sure to power off the product remove the power cord and contact Samsung Customer Service Center page 99 e Product failure an electric shock or fire may result Before Using the Product 15 Before Using the Product A Caution
76. trademarks of the Video Electronics Standards Association Icons used in this manual y The following images are for reference only Real life situations may 4 sii differ from what is shown in the images Before Using the Product Cleaning Exercise care when cleaning as the panel and exterior of advanced LCDs are easily scratched Take the following steps when cleaning E 1 Power off the monitor and computer 2 Disconnect the power cord from the monitor 4 Hold the power cable by the plug and do not touch the cable with wet we hands Otherwise an electric shock may result 3 Wipe the monitor with a clean soft and dry cloth e Donot apply a cleaning agent that contains alcohol solvent or surfactant to the monitor e Do not spray water or detergent directly on the product ER 9 4 Wet a soft and dry cloth in water and wring thoroughly to clean the exterior of the monitor 5 Connect the power cord to the product after cleaning the product 6 Power on the monitor and computer Before Using the Product Securing the Installation Space Ensure some space around the product for ventilation An internal temperature rise may cause fire and damage the product Be sure to allow the amount of space as shown below or greater when installing the product A The exterior may differ depending on the product Precautions for storage A Be su
77. ttons The selected option will be applied 4 Screen Adjustment Coordinating OSD A detailed description of each function is provided Refer to your product for details 5 1 Language Set the menu language K e Achange to the language setting will only be applied to the onscreen menu display e It will not be applied to other functions on your PC 5 1 1 Configuring Language 1 Press any button on the front of the product to display the Function Key Guide Next press J to display the corresponding menu screen 2 Press e e to move to Options and press 9 on the product 3 Press e e to move to Language and press 3 c on the product The following screen will appear Setthe menu Language Deutsch language Display Time v English Transparency Espanol Frangais Italiano v 4 Press e to move to the language you want and press 07 c 5 The selected option will be applied Coordinating OSD 5 2 Display Time Set the on screen display OSD menu to automatically disappear if the menu is not used for a specified period of time Display Time can be used to specify the time after which you want the OSD menu to disappear 5 2 1 Configuring Display Time 1 Press any button on the front of the product to display the Function Key Guide Next press J to display the corresponding menu screen 2 Press e e to move to Options and press 9 on the product 3 Press e
78. ve to the language you want and press T T 2 To hide the information message press 00 or 3 78 K e Ifthe optimum resolution is not selected the message will appear up to three times for a specified time even when the product is turned off and on again e The optimum resolution can also be selected in Control Panel on your PC 2 Connecting and Using a Source Device 40 3 1 Screen Setup Configure the screen settings such as brightness A detailed description of each function is provided Refer to your product for details Brightness You can adjust the general brightness of the picture Range 0 100 A higher value will make the picture appear brighter A e This menu is not available when fa gicBright is set to Dynamic Contrast mode e This menu is not available when Eco Light Sensor or Eco Saving is set to On 3 1 1 Configuring Brightness 1 Press any button on the front of the product to display the Function Key Guide Next press IJ to display the corresponding menu screen 2 Press e e to move to Picture and press 3 C on the product 3 Press e e to move to Brightness and press t c on the product The following screen will appear Adjust the brightness Brightness 100 level Values closer to 100 mean a brighter Contrast 75 screen Sharpness 60 Game Mode Off MAGNGBright Custom RHRENEUoscae or Color gt 4 Adjust the Brightness using the e e buttons
79. witched automatically Connecting and Using a Source Device 2 2 8 Tidying Up the Connected Cables Remove the COVER CABLE by _ Install the cables into the cable Hold the COVER CABLE and fix sliding it down with both hands in holder at the right side the cables into the grooves on the direction indicated by the the STAND REAR arrow Hold the bottom of the stand Installation is finished neck securely with your left hand and use the thumb of your right hand to slide up the COVER CABLE to fix it in place 2 3 Connecting and Using a Source Device Connecting the Product to a PC as a USB HUB 2 3 1 Connecting a PC to the Product NG The product can function as a HUB by connecting to a PC via a USB cable You can connect a source device directly to the product and control the device from the product without having to connect the device to the PC To use the product as a USB hub connect the product to a PC using a USB cable SS amp PCIN Connect the USB cable to on the back of the product and USB EI Jon the PC A A USB 2 0 cable can be used to connect the product to a PC However to take full advantage of the USB 3 0 function connect a USB 3 0 cable between the PC and the product Ensure the PC supports USB 3 0 2 3 2 Utilizing the Product as a USB HUB Using the product as a hub conn
80. y damage the product e Check the types of ports at the back of the product you want to connect Connecting and Using a PC Select a connection method suitable for your PC K Connecting parts may differ in different products 2 2 1 Connection Using the DVI Cable W4 Do not connect the power cable before connecting all other cables Ensure you connect a source device first before connecting the power cable 1 Connect the DVI cable to the DVI IN port on the back of the product and the DVI port on the PC 2 Press Q to change the input source to DVI WZ gt Provided ports may vary depending on the product e If audio is supported and the stereo cable is connected the Volume can be adjusted using the e buttons on the front of the product e Using a DVI cable that does not come with the product may degrade the display resolution Connecting and Using a Source Device 2 2 2 Connection Using the DVI HDMI Cable I Do not connect the power cable before connecting all other cables e5 Ensure you connect a source device first before connecting the power cable 7 Connect the HDMI DVI cable to the DVI IN port on the back of the product and the HDMI port on the PC 2 Press 2 03 to change the input source to DVI A e If audio is supported and the stereo cable is connected the Volume can be adjusted using the e e buttons on the front of the product e _ Provided ports
81. you connect a source device first before connecting the power cable 7 Connect one end of the DP cable to the DP IN port on the side of the product and the other end to the DP port on the PC 2 Press c8 to change the input source to DisplayPort NG e If audio is supported the Volume can be adjusted using the e e buttons on the front of the product e _ Provided ports may vary depending on the product Connecting and Using a Source Device 2 2 6 Connecting to Headphones or Speakers W4 Do not connect the power cable before connecting all other cables S Ensure you connect a source device first before connecting the power cable AUDIO IN AUDIO OUT a AL 1 Connect the stereo cable to the AUDIO IN port on the back of the product and the AUDIO OUT port on the PC 2 Connect an audio output device such as headphones or speakers to AUDIO OUT on the product A e Ifthe stereo cable is connected the Volume can be adjusted using the e e buttons on the front of the product e Provided ports may vary depending on the product Connecting and Using a Source Device 2 2 7 Connecting the Power K e Comnecting parts may differ in different products e _ The exterior may differ depending on the product e To use the product connect the power cable to a power outlet and the POWER IN port on the product POWER IN A The input voltage is s

User Manual

Contents

Download Pdf Manuals

Related Search

Related Contents