IKUtrax Outdoor Bluetooth Speaker
Contents
1. 5 hours At Maxell environmental and social responsibility is a core value of our business We are dedicated to continuous implementation of responsible initiatives with an aim to conserve and maintain the environment through responsible recycling The Bluetooth word mark and logos are registered trademarks owned by Bluetooth SIG Inc and any use of such marks by Hitachi Maxell Global Ltd is under license Other trademarks and trade names are those of their respective owners2. IKUtrax MXSP BTS150 OUTDOOR BLUETOOTH SPEAKER WITH NFC FUNCTION USER MANUAL PLEASE READ THIS USER MANUAL COMPLETELY BEFORE OPERATING THIS UNIT AND RETAIN THIS GUIDE FOR FUTURE REFERENCE PRODUCT FEATURES The Maxell IKUtrax is an Outdoor Bluetooth portable Speaker with the following features e Wireless playback of music from your Bluetooth enabled mobile phone or devices via the Bluetooth connection Water Resistant amp Dustproof IP55 and Shock Resistant NFC Connectivity Up to 33 feet 10 meters line of sight operating distance Hands free phone conversation Remotely control your music play pause next track previous track Aux in connection providing instant 3 5mm stereo audio cable connection to any device GETTING STARTED e Carefully remove the unit and all the accessories from the packaging Please verify that you have the Quick Start Guide 3 5mm AUX in cable and Micro USB charging cable before recycling the box Fully charge your IKUtrax before initial use Use the included Micro USB cable to connect your MXSP BTS 150 to the USB slot of any PC to charge The RED LED will turn on while charging and will turn off automatically when fully charged PAIRING MODE e From OFF Push and hold the centre button for 8 seconds After 5 seconds the speaker will indicate that it is ON Keep holding without releasing for another 3 seconds and the speaker will enter Pairing Mode The LED light will flash Blue rapidl
3. d and there will be another Audio Notification Don t forget to turn off the Bluetooth feature on your cell phone SPEAKER OPERATIONS PAIRING LINKING A BLUETOOTH ENABLED MOBILE PHONE OR OTHER BLUETOOTH ENABLED DEVICE TO THE MXSP BTS150 1 If the IKUtrax has never been paired with a Bluetooth device before You need to follow ue pairing instructions below to link the speaker with your Bluetooth device Push and hold the centre button for 8 seconds After 5 seconds the speaker will indicate that it is on Keep holding without releasing for another 3 seconds and the speaker will enter Pairing Mode The Indicator LED will flash blue rapidly The Speaker is ready to pair link with your Bluetooth device Turn on the Bluetooth function of your mobile phone and enable the search or scan function to find MXSP BTS150 e Select MXSP BTS150 from the device list when it appears on your device screen After turning on the IKUtrax the unit will search for the last paired device The LED INDICATOR will flash rapidly in blue If the unit finds the paired Bluetooth device a beep is heard and the LED INDICATOR will begin flashing at a slower rate After successfully pairing linking you can begin playing music from your Bluetooth device wirelessly to the Speaker 4 Press the Volume Up Down button on your Bluetooth device to adjust to the desired volume level Alternatively press the button on the speaker to increase th
4. d plug the USB cable included into the micro USB jack on the side of the IKUtrax The IKUtrax placement is Relocate the IKUtrax within Bluetooth out of range operating range 10 meter 33 feet Volume set too low Increase the volume of your device Volume level is set too high Decrease the volume of your device Sound is If the source sound file is of poor quality distorted FOSY distortion and noise are easily noticeable at Sound source is distorted l i high volume level Try a better sound quality music file again Unit gets warm after extended ete Turn the unit off for a period of time or lower This is normal play at high the volume volume SPECIFICATIONS General Specifications Bluetooth v3 0 Class Il 10m range HSP HFP A2DP AVRCP Output Frequency Range 2 400 2 484 GHz FHSS Frequency Hopping Spread Spectrum Bluetooth PIN code 0000 simple pairing Multi point Support two devices at RF Performance Max 4dBm Class 2 Near Field communication Yes Speaker Specifications Rated Impedance 40 15 Resonant FREQ fo 150Hz 30Hz Water Proof IPx5 Output S P L 78dB 2dB 1M W 1KHZz Rated FREQ Range 150Hz 20KHz Rated Power Input 2 5W 2 5W Max Power Input SW Microphone Audio input Specifications Electrical Specifications 5V 950mA 450mA 1 2mA Music play Phone call Power Consumption 1 8 rated power 8 hours Power Off Standby Time 120 hours Battery Charge time 2
5. e volume A beep alert sounds when the volume has reached the maximum level Press the button to decrease the volume Notes 1 Refer to the manual of your mobile phone tablet PC computer or other Bluetooth enabled device for Bluetooth operation since it may vary from model to model 2 Your Bluetooth enabled device will not play the music through the Speaker even if connected linked if the device does not support A2DP profile 3 If you are pairing linking your computer to the IKUtrax using Bluetooth you may need to set the Speaker as your computer s default sound device 4 If the IKUtrax is left idle for about 5 minutes without linking to any Bluetooth enabled device the Bluetooth function will automatically turn off to save battery power Using IKUtrax as a Hands free Bluetooth Speakerphone 1 Link your mobile phone to the KUtrax via Bluetooth as described above 2 When receiving an incoming call on your mobile phone press the Function key on the Speaker to switch the incoming call from your mobile phone to the IKUtrax Speaker 3 Adjust the volume control of the speaker to obtain the desired sound level 4 To end the call just press the function key again on your IKUtrax A short beep sound will be heard and the call will end If you were playing music from your mobile phone to the IKUtrax before answering the call the music will automatically resume playing when you hang up 5 To ignore an incoming call si
6. mply double click the function key Re linking to the mobile phone lf your mobile phone is already paired linked with the Speaker but became unlinked even with both Bluetooth devices turned on then you can re link them by 1 Turning off the Speaker and then turning it on again to re link your mobile phone 2 You can also re link the Speaker by using Bluetooth operation on your mobile si Please refer to the operation manual of your cell phone for more information VOLUME CONTROL Repeatedly press the button to increase the volume A beep alert sounds when volume has reached the maximum level Repeatedly press the button to decrease the volume Do not hold the or buttons to change the volume this will skip tracks Press the function button to play or pause the current track To change to a different song press the or on the top of the speaker You can also use your mobile device AUX in JACK Connect any music device by using the 3 5 mm cable included TAP TO LINK WITH NFC Install the Android Apps provided to the NFC equipped Smartphone Simply align the NFC LOGO and hold for 1 2 seconds to activate Bluetooth pair the two devices and stream your music Connect is shown on the phone screen when MXSP BTS150 is connected successfully Tap again to disconnect two devices and the phone will show Disconnect on the screen CARE AND MAINTENANCE 1 Avoid operating you
7. r unit under direct sunlight or in hot humid or dusty places 2 Keep your unit away from heating appliances and sources of electrical noise such as fluorescent lamps or motors CLEANING THE UNIT e To prevent fire or shock hazard disconnect your unit from the USB port and power source when cleaning e The finish on the unit may be cleaned with a dust cloth and cared for as other furniture Use caution when cleaning and wiping the plastic parts e lf the cabinet becomes dusty wipe it with a soft dry dust cloth Do not use any wax or polish sprays on the cabinet e lf the front panel becomes dirty or smudged with fingerprints it may be cleaned with a soft cloth slightly dampened with a mild soap and water solution Never use abrasive cloths or polishes as these will damage the finish of your unit CAUTION Never allow any water or other liquids to get inside the unit while cleaning TROUBLESHOOTING Symptom Possible Problem Solution The USB power adaptor not included is not plugged into a wall outlet or the USB cable included is not plugged into the micro Not Charging USB jack on the side of the IKUtrax functioning confirm the outlet is working functioning and try another USB port i i ARAK SAMET 1S Recharge the IKUtrax battery The IKUtrax is not linked Go through Speaker Operations process to No Sound with your mobile phone link the Speaker Plug the USB power adaptor not included into a wall outlet an
8. ternal battery working properly Charging in Unit Power OFF mode The Indicator LED is RED while charging The Indicator LED will turn off automatically when the battery is fully charged A Battery Note and Care Do not burn or bury batteries Do not puncture or crush e Do not disassemble e Lithium batteries must be recycled Do not dispose of in the trash e Use only chargers rated for Li ion cells Be sure the charger s voltage and current settings are correct for the battery pack being charged e Charge batteries on a fireproof surface and away from flammable items or liquids e Batteries should NEVER be left unattended while charging Only adults should charge the batteries e Follow the manufacturer s instructions for charging the product and do not charge longer than recommended Unplug the charger when the battery is charged or not in use NOTE The Speaker is not magnetically shielded and may cause colour distortion on the screen of some TVs or video monitors To avoid this you may need to move the unit further away from the TV or monitor if an unnatural colour shifts or image distortion occurs ON OFF Hold down the function button for 5 seconds to turn the unit ON The LED Indicator will flash blue for 5 seconds and there will be an Audio Notification to indicate that it is now ON To turn the unit OFF hold the function key for 5 seconds The LED Indicator will flash red for one secon
9. ur computer or into a USB power adaptor Not included using the included USB cable 2 The LED indicator will turn red while charging and turn off automatically when the unit is fully charged Unplug the USB cable from the power source once the battery is fully charged RECHARGING THE INTERNAL BATTERY After prolonged use the internal battery will become weak and the operation may become intermittent When the internal battery charge is very low the Indicator LED will flash red alerting you to recharge the internal battery as soon as possible Plug the Speaker into a USB port on your computer or into a DC 5V 500mA and up USB power adaptor not included using the included USB cable Disconnect the USB cable from the Speaker as soon as it is fully charged Charging in Power ON mode The Indicator LED is RED BLUE flashing while charging The Indicator LED will turn off automatically when the battery is fully charged Note 1 Charging time will vary if you are listening to music while charging the internal battery We recommend you switch off the Speaker power during the charging process 2 To prolong the life of a rechargeable battery it is recommended that you completely discharge it before fully charging it again 3 Rechargeable batteries need to be cycled for maximum performance and longer battery life If you don t use the speaker that often make sure to recharge the battery at least once a month in order to keep the in
10. y e See your phone music device manual for pairing instructions e Then you will hear a voice prompt while the Pairing successful LOCATION OF CONTROLS Q 6000 TOP SIDE FUNCTION BUTTON ON OFF PLAY STOP PAIR OR PICK UP HANG UP VOLUME UP OR NEXT SONG VOLUME DOWN OR PREVIOUS SONG LED POWER CHARGING PAIRING STATUS INDICATOR NFC PAIRING AREA MICROPHONE HOOK FOR WRIST STRAP 3 5MM AUX IN JACK CHARGING JACK MICRO USB Oe oe LED INDICATOR Red flashing every 0 1 sec Low Power standby Red light on Charging FUNCTION BUTTON INDICATOR Double click function key during the incoming Reject call ring Double click function key Siri iPhone only Click function key once Play Pause music LEFT amp RIGHT BUTTON INDICATOR Behaviour Description One click the Vol key increase decrease Adjust Volume Press and hold the for 3 seconds Next track Press and hold the for 3 seconds CHARGING INSTRUCTIONS This unit operates on a built in Lithium battery that can be recharged either using the USB port on your computer or from a USB power adaptor not included with a rated output of DC 5V 500mA and up Note The micro USB CHARGING JACK located on this unit is only designed for charging the built in Li ion battery CHARGING THE BATTERY FOR FIRST TIME 1 Charge the built in Lithium battery a minimum of 3 5 hours prior to first use Plug the unit into the USB port on yo
Download Pdf Manuals
Related Search