15PX01-00 E2 User Manual
Contents
1. They are tested according to the standards given in the Technical Data and thus enable you to achieve certification of the product according to the standards applicable in your field of application MEN Mikro Elektronik GmbH 9 20PX01 00 E2 2014 06 13 About this Document RoHS Since July 1 2006 all MEN standard products comply with RoHS legislation Since January 2005 the SMD and manual soldering processes at MEN have already been completely lead free Between June 2004 and June 30 2006 MEN s selected component suppliers have changed delivery to RoHS compliant parts During this period any change and status was traceable through the MEN ERP system and the boards gradually became RoHS compliant WEEE Application The WEEE directive does not apply to fixed industrial plants and tools The compliance is the responsibility of the company which puts the product on the market as defined in the directive components and sub assemblies are not subject to product compliance In other words Since MEN does not deliver ready made products to end users the WEEE directive is not applicable for MEN Users are nevertheless recommended to properly recycle all electronic boards which have passed their life cycle Nevertheless MEN is registered as a manufacturer in Germany The registration number can be provided on request Copyright 2014 MEN Mikro Elektronik GmbH All rights reserved Germany MEN Mikro Elektronik GmbH Neuwieder Str2. USB_D in out USB line Optional 2 ODO in Odometer input 1PPS out PPS output Signals in grey font are not supported 2 These signals are only available as an option Please refer to the PCI Express Mini Card Specifications in Chapter 4 1 1 PCI Express Mini Card on page 16 for further details MEN Mikro Elektronik GmbH 14 20PX01 00 E2 2014 06 13 Functional Description 3 Functional Description 3 1 Power Supply The PX1 is supplied with 3 3V via the PCI Express Mini Card connector 3 1 1 Power Supply for Active Antennas The standard power supply for the PX1 is 3 3 V A phantom supply is available as an option allowing the PX1 to supply active GPS antennas with 3 3 V or 5 V In addition it is possible to extend the power supply to 3 5 V or 5 V with either an optional assembly or a version that has been configured specifically 3 2 GNSS Interface The PX1 is equipped with a 32 channel Fastrax IT600 GNSS receiver which supports GPS and GLONASS funtionality The GNSS signals are received via an onboard U FL connector which has to be connected to an external antenna The PX1 itself has no antenna Please note that MEN does not supply antennas with the PX1 since the choice of a suitable antenna depends on your application Please see Technical Data for detailed information on the GNSS interface 3 3 Software Requirements The PX1 does not require a specific driver The USB2UART interface is su
3. GmbH 12 20PX01 00 E2 2014 06 13 Connecting the PCI Express Mini Card 2 Connecting the PCI Express Mini Card 2 1 Peripheral Interface An external active or passive antenna can be connected to the U FL antenna connector Depending on the used antenna an U FL to SMA adapter might be required to connect an antenna 2 2 Host Interface The PX1 connects to the carrier board via a PCI Express Mini Card connector PCI Express Mini Cards use either a single PCI Express lane x1 or a USB connection the PX1 only supports the USB 2 0 connection It is equipped with one 52 pin standard PCI Express Mini Card connector The following standard signals are supported signal directions according to PCI Express Mini Card standard Table 1 Pin assignment of PCI Express Mini Card connector 2 3 3Vaux 4 GND 9 GND 2 1 15 GND 18 GND 21 GND 24 3 3Vaux 26 GND 27 GND 29 GND e a 34 GND 36 USB_D 35 GND 38 USB_D 37 GND 40 GND 39 3 3Vaux 41 3 3Vaux 43 GND l 47 reserved ODO 50 GND 49 reserved 1PPS 52 3 3Vaux MEN Mikro ElektronikGmbHtt lt i ststsSsSsS EEE 13 20PX01 00 E2 2014 06 13 Connecting the PCI Express Mini Card Table 2 Signal mnemonics of 52 pin PCI Express Mini Card connector Signal Direction Function Power GND Ground 3 3Vaux out 3 3V source 1 5V out 1 5V source USB USB_D in out USB line
4. described in this document lt P The globe icon indicates a hyperlink that links directly to the Internet h where the latest updated information is available When no globe icon is present the hyperlink links to specific elements and information within this document italics Folder file and function names are printed in italics bold Bold type is used for emphasis mono A monospaced font type is used for hexadecimal numbers listings C function descriptions or wherever appropriate Hexadecimal numbers are preceded by 0x comment Comments embedded into coding examples are shown in green text e Signal names followed by a hashtag or preceded by a forward slash indicate that this signal is either active low or that it becomes active at a falling edge in out Signal directions in signal mnemonics tables generally refer to the corresponding board or component in meaning to the board or component out meaning from it the board or component Blue vertical lines in the outer margin indicate sections where changes have been made to this version of the document MEN Mikro Elektronik GmbH 8 20PX01 00 E2 2014 06 13 About this Document Legal Information Changes MEN Mikro Elektronik GmbH MEN reserves the right to make changes without further notice to any products herein Warranty Guarantee Liability MEN makes no warranty representation or guarantee of any kind regarding the suitabili
5. eve 0 16 412 GNSS 22 a1ssapeobads EEO EES REE 16 4 2 Finding out the Product s Article Number Revision and Serial NUMBDEQi nstoseaeiatarcsnteagdentededaawanased 16 Figures Figure 1 Map ot the board top VIEW eread nocan aneen iiet oE 12 Figure 2 Labels showing the product s article number revision and senal number 2y h 090 tag Teri nana swe EAEE E E 16 Tables Table 1 Pin assignment of PCI Express Mini Card connector 13 Table 2 Signal mnemonics of 52 pin PCI Express Mini Card connector 14 MEN Mikro Elektronik GmbH 11 20PX01 00 E2 2014 06 13 Getting Started 1 Getting Started This chapter gives an overview of the board and some hints for first installation in a system 1 1 Map of the Board Figure 1 Map of the board top view U FL antenna connector PCI Express Mini Card connector 1 2 Integrating the Board into a System You can use the following check list when installing the card in a system for the first time and with minimum configuration The installation of the PX1 depends on the carrier board Please refer to your carrier board s user manual before installing the PX1 MI Power down the system and remove the PCI Express Mini Card carrier board M Install the PX1 on the PCI Express Mini Card slot of the carrier board as described in the carrier board s user manual MI Insert the carrier board into the system again MI Power up the system MEN Mikro Elektronik
6. 20PX01 00 E2 2014 06 13 PX1 GLONASS amp GPS PCI Express Mini Card Configuration example Men PX1 GLONASS amp GPS PCI Express Mini Card PX1 GLONASS amp GPS PCI Express Mini Card The PX1 is a PCI Express Mini Card providing a GNSS receiver with GLONASS and GPS functionality It supports active or passive antennas which can be connected to an U FL connector The received antenna signals are sent to the host via USB GLONASS is the Russian alternative to GPS and has comparable coverage and precision The PX1 is prepared to support the European Union s global navigation satellite system Galileo and the Chinese navigation satellite system Compass The GNSS module provides a gyroscope sensor for dead reckoning functions which enable accurate positioning Various Satellite Based Augmentation Systems SBAS are also supported The PX1 provides communication information compliant to the NMEA 0183 protocol Diagram Gyroscope sensor U FL antenna Antenna signal connector Onboard E Options MEN Mikro Elektronik GmbH 2 20PX01 00 E2 2014 06 13 Technical Data Technical Data GNSS Interface 32 channel GNSS Global Navigation Satellite System receiver GPS Band Code L1 frequency C A code SPS GLONASS Band Code L1 frequency C A code SP Integrated TCXO RTC Assisted GPS support Dead Reckoning support gyroscope Differential GPS support Satellite Based Augmentation System WAAS Egnos MS
7. AS RTCM104 Accuracy unaided Position 3 m horizontal 5 m vertical Velocity 0 05 m s Time 1 us Time To First Fix TTFF Cold start 35 s typ Hot start 2 s typ Sensitivity Acquisition cold 147 dBm Re Acquisition 157 dBm Tracking 161 dBm Acceleration 5 g max Velocity 515 m s max Altitude 18 000 m max Protocol NMEA 0183 rev 3 01 One U FL antenna connector For the use of an external active or passive antenna Phantom power supply 3 3V Host Interface e PCI Express Mini Card connector USB 2 0 Electrical Specifications e Supply voltage power consumption 3 3 V max 191 mA Impedance 50 Ohm Mechanical Specifications e Dimensions 30 mm x 58 mm x 5 mm PCI Express Full Mini Card e Weight 4 g MEN Mikro Elektronik GmbH 3 20PX01 00 E2 2014 06 13 Technical Data Environmental Specifications e Temperature range operation 40 85 C qualified Airflow min 1 m s Temperature range storage 40 85 C Relative humidity operation max 95 non condensing Relative humidity storage max 95 non condensing Altitude 300 m to 3000 m Shock 15 g 11 ms Bump 10 g 16 ms Vibration sinusoidal 1 g 10 150 Hz Conformal coating on request MTBF e tbdh 40 C according to IEC TR 62380 RDF 2000 Safety e PCB manufactured with a flammability rating of 94V 0 by UL recognized manufacturers EMC Conformity e EN 50121 3 2 table 4 EMC in
8. aBe 3 7 90411 Nuremberg Phone 49 911 99 33 5 0 Fax 49 911 99 33 5 901 E mail info men de www men de MEN Mikro Elektronik GmbH 20PX01 00 E2 2014 06 13 France MEN Mikro Elektronik SAS 18 rue Ren Cassin ZA de la Chatelaine 74240 Gaillard Phone 33 0 450 955 312 Fax 33 0 450 955 211 E mail info men france fr www men france fr USA MEN Micro Inc 860 Penllyn Blue Bell Pike Blue Bell PA 19422 Phone 215 542 9575 Fax 215 542 9577 E mail sales menmicro com www menmicro com Contents Contents 1 Getting Started dccddewtan begs cae oeosans SieKeesbaaS oe es aes waie 12 LE MapOrthe Board i2s2ccpaucape torion Etne EEEE bees 12 1 2 Integrating the Board into a System 0 000008 12 2 Connecting the PCI Express Mini Card sssssssssssssssso 13 2 1 Peripheral Interface 2 4 rers ipi ciracda cernes t kene ea pitarin 13 2 2 Host IMterace 1 1 i4 0o nocengs waesinctqoecnagede Can pnei 13 3 Functional Description icici soscsichced ioc eieow sad aoe sues owes 15 3 1 Power Supply casidescasdaceeeas oct riri EE KENEN E KERE 15 3 1 1 Power Supply for Active Antennas 15 32 GNSS Merlie avd tases beh toke AAAA EE DE 15 3 3 Software Requirements s6s 0 09 ice sn ob eneon hee ie 44a wae 15 4 Appendix sssrssssr riser or ons deka ets ees E seas eene ee 16 4 1 Literature and Web Resources 0 0 c eee eee 16 4 1 1 PCILEXpress Mini Card cs ccceeeiveacss eSee
9. itical and life critical applications is limited to the environmental specification given for each product in the technical user manual The correct function of MEN products under extended environmental conditions is limited to the individual requirement specification and subsequent validation documents for each product for the applicable use case and has to be agreed upon in writing by MEN and the customer Should the customer purchase or use MEN products for any unintended or unauthorized application the customer shall indemnify and hold MEN and its officers employees subsidiaries affiliates and distributors harmless against all claims costs damages and expenses and reasonable attorney fees arising out of directly or indirectly any claim or personal injury or death associated with such unintended or unauthorized use even if such claim alleges that MEN was negligent regarding the design or manufacture of the part In no case is MEN liable for the correct function of the technical installation where MEN products are a part of Trademarks All products or services mentioned in this publication are identified by the trademarks service marks or product names as designated by the companies which market those products The trademarks and registered trademarks are held by the companies producing them Inquiries concerning such trademarks should be made directly to those companies Conformity MEN products are no ready made products for end users
10. pported under Linux kernels higher than 3 0 and under Windows 7 and newer Please check the MEN website for a VxWorks driver D For evaluation software please see the u blox website GNSS receiver manufacturer d For integration software please go to FreeGPS Ge a For more information on first installation please contact the MEN sales S team MEN Mikro Elektronik GmbH 15 20PX01 00 E2 2014 06 13 Appendix 4 1 Literature and Web Resources D PX1 data sheet with up to date information and documentation h s www men de products 15PX01 html 4 1 1 PCI Express Mini Card E PCI Express Mini Card Electromechanical Specification Rev 2 0 Wis August 31 2011 PCI Special Interest Group www pcisig com 4 1 2 GNSS lt P e Fastrax IT600 GNSS Receiver E www u blox com images downloads Product_Docs IT600_Datasheet pdf e GNSS in general en wikipedia org wiki Satellite_navigation 4 2 Finding out the Product s Article Number Revision and Serial Number MEN user documentation may describe several different models and or design revisions of the PX1 You can find information on the article number the design revision and the serial number on a label attached to the board e Article number Gives the product s family and model This is also MEN s ordering number To be complete it must have 9 characters e Revision number Gives the design revision of
11. rcuitry Use a grounded wrist strap before handling computer components Place components on a grounded antistatic pad or on the bag that came with the component whenever the components are separated from the system Only store the board in its original ESD protected packaging Retain the original packaging in case you need to return the board to MEN for repair MEN Mikro Elektronik GmbH 6 20PX01 00 E2 2014 06 13 About this Document About this Document This user manual is intended only for system developers and integrators it is not intended for end users It describes the hardware functions of the board connection of peripheral devices and integration into a system It also provides additional information for special applications and configurations of the board The manual does not include detailed information on individual components data sheets etc A list of literature is given in the appendix History Issue Comments Date E1 First issue 2013 05 06 E2 Added Phantom power supply 3 3V 2014 06 13 MEN Mikro Elektronik GmbH 7 20PX01 00 E2 2014 06 13 About this Document Conventions Indicates important information or warnings concerning the use of voltages that could lead to a hazardous situation which could result in personal injury or damage or destruction of the component Indicates important information or warnings concerning proper functionality of the product
12. rolling stock e EN 55011 radio disturbance EN 61000 4 2 EN 50121 3 2 table 9 ESD e EN 61000 4 3 EN 50121 3 2 table 9 electromagnetic field immunity EN 61000 4 4 EN 50121 3 2 table 8 burst e EN 61000 4 6 EN 50121 3 2 table 7 immunity to conducted disturbances Software Support e For information on first installation please contact MEN Also see Configuration Options MEN Mikro Elektronik GmbH 4 20PX01 00 E2 2014 06 13 Configuration Options Configuration Options Functionality e Odometer input PPS output e Without Dead Reckoning support gyroscope not assembled e Phantom power supply 3 3V Mechanical e Conformal coating Please note that some of these options may only be available for large volumes Please ask our sales staff for more information lt 2 For available standard configurations see the online data sheet MEN Mikro Elektronik GmbH 5 20PX01 00 E2 2014 06 13 Product Safety Product Safety Electrostatic Discharge ESD Computer boards and components contain electrostatic sensitive A devices Electrostatic discharge ESD can damage components To protect the board and other components against damage from static electricity you should follow some precautions whenever you work on your computer Power down and unplug your computer system when working on the inside Hold components by the edges and try not to touch the IC chips leads or ci
13. the product e Serial number Unique identification assigned during production If you need support you should communicate these numbers to MEN Figure 2 Labels showing the product s article number revision and serial number Complete article number 45PX01 00 O ig i 00 00 00 VE 641517 Revision number Serial number MEN Mikro Elektronik GmbH 16 20PX01 00 E2 2014 06 13
14. ty of its products for any particular purpose nor does MEN assume any liability arising out of the application or use of any product or circuit and specifically disclaims any and all liability including without limitation consequential or incidental damages TO THE EXTENT APPLICABLE SPECIFICALLY EXCLUDED ARE ANY IMPLIED WARRANTIES ARISING BY OPERATION OF LAW CUSTOM OR USAGE INCLUDING WITHOUT LIMITATION THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE OR USE In no event shall MEN be liable for more than the contract price for the products in question If buyer does not notify MEN in writing within the foregoing warranty period MEN shall have no liability or obligation to buyer hereunder The publication is provided on the terms and understanding that 1 MEN is not responsible for the results of any actions taken on the basis of information in the publication nor for any error in or omission from the publication and 2 MEN is not engaged in rendering technical or other advice or services MEN expressly disclaims all and any liability and responsibility to any person whether a reader of the publication or not in respect of anything and of the consequences of anything done or omitted to be done by any such person in reliance whether wholly or partially on the whole or any part of the contents of the publication Conditions for Use Field of Application The correct function of MEN products in mission cr
Download Pdf Manuals
Related Search