Matrx Libra Cushion Manual
Contents
1. Depth Width 16 in T 18in 20in 22in nt 30 cm 36 cm 41 cm 46 cm 51 cm 56 cm 14 in 36 cm A 15 in 38 cm LC 1520 16 in 41 cm LC 1620 17 in 43 cm A 18 in 46 cm Lois 19 in 48 cm LC1920 20 in 51 cm LC2020 21 in 53 cm 22 in 56 cm LC2218 LC2220 LC2222 500 Ibs 23 in 58 cm LC2318 LC2320 LC2322 227 kg 24 in 61 cm LC2418 LC2420 LC2422 3 USAGE Avoid the use of additional covers or padding between the user and the cushion as this could reduce its effectiveness Please read through all instructions prior to completing the installation of the Libra Cushion 3 1 Installing the Invacare Matrx Libra Cushion 1 Position the cushion so the material identification tags not shown face the rear 2 Align the hook and loop strips not shown on the bottom of the cushion with those on the wheelchair seat 3 Position the cushion onto the wheelchair as far back as possible 4 Press down to ensure the hook and loop strips are firmly engaged 3 2 Libra Accessories Sold Separately Optional accessories are available separately and allow the cushion to be adjusted where necessary to meet the specific positioning needs of the end user gt Y Fluid Supplement LF RR WO Lateral Wedge 7 Abductor T er RFILR Tapered Wedge 1 NAAA AA AS eng ye N Seat Wedge 2 Hemi Wedge 1 i Installing the Abductor Support Sold Separately see ima2. Hemi Wedge Lateral Wedges x2 lateral wedges sold individually Tapered Wedge RF LR shown 5 4 CARE AND MAINTENANCE 4 1 Cleaning A CAUTION DO NOT use cleaning agents containing phenols or alcohols Otherwise product damage may occur Outer Cover The cover can be wiped clean with a damp towel The cover can be removed for laundering Unzip the cover and carefully remove the foam with inner liner Machine wash cover in warm water Hang cover to dry or tumble dry on low Dry cover completely before reinstalling Inner Liner The platilon inner liner should not be removed from the foam The inner liner may be cleaned using a damp cloth and disinfectant 4 2 Inspection WARNING DO NOT continue to use this product if problems are discovered Corrective maintenance can be performed at or arranged through your equipment supplier Visually inspect parts including upholstery materials foams and plastics for deformation corrosion breakage wear or compression 5 AFTER USE 5 1 Reuse WARNING Risk of Injury Always inspect the product for damage before transferring the product to a different user lf any damage is found DO NOT use the product Otherwise injury may occur 6 WARRANTY PLEASE NOTE THE WARRANTY BELOW HAS BEEN DRAFTED TO COMPLY WITH FEDERAL LAW APPLICABLE TO PRODUCTS MANUFACTURED AFTER JULY 4 1975 This warranty is extended only to the original purchaser
3. to provide the highest level of skin protection for users with high risk of skin breakdown Fluid Sac The unique fluid sac design provides optimum skin protection and helps prevent bottoming out in the ishcial sacral areas Inner Liner and Outer Cover The inner liner is moisture resistant to protect the foam The outer cover is water resistant and breathable Regular cleaning and inspection of the covers is recommended Refer to Section 4 Care and Maintenance 2 2 SAFETY Check ALL parts for shipping damage If shipping damage is noted DO NOT use Contact carrier dealer for further instruction 2 1 Intended Use The Invacare Matrx Libra cushion is designed to provide the highest level of skin protection for users with high risk of skin breakdown 2 2 General Warnings WARNING DO NOT USE THIS PRODUCT OR ANY AVAILABLE OPTIONAL EQUIPMENT WITHOUT FIRST COMPLETELY READING AND UNDERSTANDING THESE INSTRUCTIONS AND ANY ADDITIONAL INSTRUCTIONAL MATERIAL SUCH AS OWNER S MANUALS SERVICE MANUALS OR INSTRUCTION SHEETS SUPPLIED WITH THIS PRODUCT OR OPTIONAL EQUIPMENT IF YOU ARE UNABLE TO UNDERSTAND THE WARNINGS CAUTIONS OR INSTRUCTIONS CONTACT A HEALTHCARE PROFESSIONAL DEALER OR TECHNICAL PERSONNEL BEFORE ATTEMPTING TO USE THIS EQUIPMENT OTHERWISE INJURY OR DAMAGE MAY OCCUR A ACCESSORIES WARNING Invacare products are specifically designed and manufactured for use in conjunction with Invacare accessories Accessories des
4. EIN AND THE REMEDY FOR VIOLATIONS OF ANY IMPLIED WARRANTY SHALL BE LIMITED TO REPAIR OR REPLACEMENT OF THE DEFECTIVE PRODUCT PURSUANT TO THE TERMS CONTAINED HEREIN INVACARE MOTION CONCEPTS SHALL NOT BE LIABLE FOR ANY CONSEQUENTIAL OR INCIDENTAL DAMAGES WHATSOEVER THIS WARRANTY SHALL BE EXTENDED TO COMPLY WITH STATE PROVINCIAL LAWS AND REQUIREMENTS NOTES Concepts Motion Invacare USA One Invacare Way Elyria Ohio USA 44036 2125 440 329 6000 800 333 6900 Motion Concepts USA 700 Ensminger Rd Suite 112 Tonawanda NY 14150 888 433 6818 www invacare com Canada 570 Matheson Blvd E Unit 8 Mississauga Ontario L4Z 4G4 Canada 800 668 5324 www motionconcepts com Canada 84 Citation Dr Concord Ontario L4K 3C1 905 695 0134 866 748 7943 TRDO342 Rev A
5. User Manual Po DEALER This manual MUST be given to the user of the product USER BEFORE using this product read this manual and A save for future reference matry Invacare Matrx Libra C Model Number LC 1 GENERAL 1 1 Symbols Signal words are used in this manual and apply to hazards or unsafe practices which could result in personal injury or property damage See the information below for def initions of the signal words A WARNING Warning indicates a potentially hazardous situation which if not avoided could result in death or serious injury CAUTION Caution indicates a potentially hazardous situation which if not avoided may result in property damage or minor injury or both Gives useful tips recommendations and information for efficient trouble free use 1 2 Overview Important Information The best way to avoid problems related to pressure sores is to understand their causes and your role in a skin management program Your therapist and physician should be consulted if you have questions regarding individual limitations and needs All cushions should be selected carefully Working with your therapist and physician is the best way to assure that a cushion choice matches your individual needs As the needs of the individual become more complex cushion evaluation becomes more important Invacare Matrx Libra The Invacare Matrx Libra cushion uses a combination of molded foam and a sacral ischial fluid sac
6. authorization The defective unit or parts must be returned for warranty inspection using the serial number when applicable as identification within thirty 30 days of return authorization date DO NOT return products to our factory without our prior consent C O D shipments will be refused please prepay shipping charges LIMITATIONS AND EXCLUSIONS THE WARRANTY SHALL NOT APPLY TO PROBLEMS ARISING FROM NORMAL WEAR OR FAILURE TO ADHERE TO THE ENCLOSED INSTRUCTIONS IN ADDITION THE FOREGOING WARRANTY SHALL NOT APPLY TO SERIAL NUMBERED PRODUCTS IF THE SERIAL NUMBER HAS BEEN REMOVED OR DEFACED PRODUCTS SUBJECTED TO NEGLIGENCE ACCIDENT IMPROPER OPERATION MAINTENANCE OR STORAGE OR PRODUCTS MODIFIED WITHOUT INVACARE S MOTION CONCEPTS EXPRESS WRITTEN CONSENT INCLUDING BUT NOT LIMITED TO MODIFICATION THROUGH THE USE OF UNAUTHORIZED PARTS OR ATTACHMENTS PRODUCTS DAMAGED BY REASON OF REPAIRS MADE TO ANY COMPONENT WITHOUT THE SPECIFIC CONSENT OF INVACARE MOTION CONCEPTS PRODUCTS DAMAGED BY CIRCUMSTANCES BEYOND INVACARE S MOTION CONCEPTS CONTROL PRODUCTS REPAIRED BY ANYONE OTHER THAN AN INVACARE MOTION CONCEPTS DEALER SUCH EVALUATION SHALL BE SOLELY DETERMINED BY INVACARE MOTION CONCEPTS THE FOREGOING WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL OTHER EXPRESS WARRANTIES IF ANY INCLUDING THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE IT SHALL NOT EXTEND BEYOND THE DURATION OF THE EXPRESSED WARRANTY PROVIDED HER
7. ges p 4 1 Remove the outer cover and inner liner 2 Align the velcro hook strip on the abductor support with the velcro loop strip on the top of the cushion 1 3 Secure the abductor to the cushion 2 at the desired depth 4 Re install the inner liner and outer cover 4 i Installing the Abductor Support cont d Optional Abductor ii Installing the Fluid Supplement Sold Separately 1 Remove outer cover and inner liner and unfasten the velcro strap s from the side and or rear of the fluid sac where you wish to install the fluid supplement 1 2 Locate the small pocket slot on the underside of the fluid sac 2 3 Install the fluid supplement pack inside the slot pocket 3a and adjust the fluid supplement to the desired position 3b 4 Refasten the velcro strap s and re install the inner liner and outer cover Installation Supplement Note the outer fluid sac is not shown for illustration purposes iii Installing a Seat Wedge Lateral Wedge and or Tapered Wedge Sold Separately 1 Remove the outer cover and inner liner and position the wedge s in the desired position on the underside of the foam cushion as illustrated 1a 1b 1c Note Foam wedges can be trimmed to size as needed 2 Secure wedge s to the underside of the foam cushion via velcro strips 3 Re install the inner liner and outer cover Seat Wedge
8. igned by other manufacturers have not been tested by Invacare and are not recommended for use with Invacare products INSTALLATION WARNING After any adjustments repair or service and before use make sure that all attaching component parts are secure Ensure the seat cushion is properly secured to the wheelchair before using Otherwise injury or damage may occur Installing a cushion on a wheelchair may affect the center of gravity of the wheelchair and may cause the wheelchair to become unstable potentially resulting in injury A WARNING Skin condition should be checked very frequently after the installation of any new seating system Your therapist and physician should be consulted if you have any questions regarding individual limitations and needs Working with your therapist physician and equipment supplier is the best way to assure that a seating choice matches your individual needs As the needs of the individual become more complex the seating evaluation becomes more important The cushion is designed to be used only at room temperature If it is left at lower temperatures always allow it to warm to room temperature before using Sitting on extremely cold or hot surfaces can cause skin damage Avoid sharp objects or exposure to excessive heat or open flame 2 3 Weight Limitation and Model Numbers Refer to the chart for the weight limitation and stock model numbers Configured model numbers are LC Grey size not available
9. user of our products This warranty gives you specific legal rights and you may also have other legal rights which vary from state to state Invacare Motion Concepts warrants this product to be free from defects in materials and work manship for three years of use by original purchaser This warranty does not apply to punctures tears or burns nor to the removable cushion cover or inner liner If within such warranty period any such product shall be proven to be defective such product shall be repaired or replaced at Invacare s Motion Concepts option with refurbished or new parts This warranty does not include any labor or shipping charges incurred in replacement part installation or repair of any such product Product repairs shall not extend this warranty coverage for repaired product shall end when this limited warranty terminates Invacare s Motion Concepts sole obligation and your exclusive remedy under this warranty shall be limited to such repair and or replacement For warranty service please contact the dealer from whom you purchased your Invacare Motion Concepts product In the event you do not receive satisfactory warranty service please write directly to Invacare Motion Concepts at the address on the back cover Provide dealer s name address model number the date of purchase indicate nature of the defect and if the product is serialized indicate the serial number Invacare Corporation Motion Concepts will issue a return
Download Pdf Manuals
Related Search