User manual
Contents
1. Press AUDIO IN on the remote control Ww N Press the buttons on the MP3 player to select and play audio files or music USB storage devices Enjoy audio on a USB storage device such as an MP3 player and USB flash memory etc What you need e A USB storage device that is formatted for FAT or NTFS file systems and complies with the Mass Storage Class e An MP3 file on a USB storage device 1 Connect a USB storage device to this product Press USB on the remote control wN Use the remote control to control play e Press gt I to start pause or resume play e Press I4 PI to skip to the previous or next track During USB play press and hold USB to enter repeat mode then press USB to select one of the following play modes e ONE RPT repeat the current track e ALL RPT repeat all the tracks in one folder SHUFFLE play randomly in one folder OFF RPT exit repeat or shuffle play mode EN 11 This product may not be compatible with certain types of USB storage device f you use a USB extension cable USB HUB or USB multi reader the USB storage device may not be recognized Digital camera PTP and MTP protocols are not supported Do not remove the USB storage device while it is being read DRM protected music files MP3 are not supported Support a USB port 5V 1A Auto standby When playing media from a connected device this product automatically switc2. for example an MP3 player 3 5mm jack Wireless subwoofer This product comes with a wireless subwoofer D AC MAINS Connect to the power supply Subwoofer indicator e When the power is turned on the indicator lights up During wireless pairing between the subwoofer and the main unit the indicator blinks white quickly When the pairing succeeds the indicator lights up white When the pairing fails the indicator blinks white slowly When wireless connection is disconnected for one minute the indicator turns off 3 CONNECT connect Press and hold to to enter the pairing mode for the subwoofer 3 Connect This section helps you connect this product to a TV and other devices For information about the basic connections of this product and accessories see the quick start guide Note For identification and supply ratings see the type plate at the back or bottom of the product Before you make or change any connections make sure that all devices are disconnected from the power outlet Placement Place the subwoofer at least 1 meter 3 feet away from the main unit and 10 centimeters 4 inches away from the wall For best results place your subwoofer as shown below Pair up with the subwoofer The wireless subwoofer automatically pairs up with the main unit for wireless
3. or damage to the unit e Install all batteries correctly and as marked on the unit Do not mix batteries old and new or carbon and alkaline etc e Remove batteries when the unit is not used for a long time The batteries shall not be exposed to excessive heat such as sunshine fire or the like e Perchlorate Material special handling may apply See www dtsc ca gov hazardouswaste perchlorate The product remote control may contain a coin button type battery which can be swallowed Keep the battery out of reach of children at all times If swallowed the battery can cause serious injury or death Severe internal burns can occur within two hours of ingestion f you suspect that a battery has been swallowed or placed inside any part of the body seek immediate medical attention When you change the batteries always keep all new and used batteries out of reach of children Ensure that the battery compartment is completely secure after you replace the battery f the battery compartment cannot be completely secured discontinue use of the product Keep out of reach of children and contact the manufacturer e Apparatus shall not be exposed to dripping or splashing e Do not place any sources of danger on the apparatus for example liquid filled objects lighted candles e This apparatus may contain lead and mercury Dispose according to local State or Federal laws For disposal or recycl
4. x 9 4 x 11 7 e Weight 3 1 kg 6 8 Ibs USB e Compatibility Hi Speed USB 2 0 e Class support USB Mass Storage Class MSC e Hle system FAT16 FAT32 NTFS Supports MP3 file formats Bluetooth Bluetooth profiles A2DP AVRCP Bluetooth version 4 0 EDR 14 EN Remote control batteries e 1 x AAA R03 1 5 V 8 Troubleshooting Warning Risk of electric shock Never remove the casing of the product To keep the warranty valid never try to repair the product yourself If you have problems using this product check the following points before you request service If you still have a problem get support at www philips com support Main unit The buttons on this proudct do not work Disconnect this product from the power supply for a few minutes then reconnect Sound No sound from the speakers of this product e Connect the audio cable from this product o your TV or other devices ake sure that you connect the audio input on this product to the audio output on your TV or other devices e Reset this product to its factory settings e On the remote control select the correct audio input ake sure that this product is not muted Distorted sound or echo e f you play audio from the TV through this product make sure that the TV is muted Audio and video are not synchronized e Press AUDIO SYNC to synchronize he audio with the video Error messag
5. connection when you turn on the main unit and the subwoofer If no audio from the wireless subwoofer can be heard manually pair up the subwoofer 1 Turn on the main unit and the subwoofer L gt f the connection to the main unit is ost the indicator on the subwoofer blinks white slowly 2 Press and hold the CONNECT connect button on the subwoofer to enter the pairing mode L gt The indicator on the subwoofer blinks white quickly 3 On the remote control within six seconds press amp twice then BASS once TREBLE once and then amp L gt If the pairing succeeds the indicator on the subwoofer lights up white L gt If the pairing fails the indicator on the subwoofer blinks white slowly 4 ifthe pairing fails repeat the steps above Connect audio from TV Connect this product to a TV You can listen to audio from TV programs through the speakers of this product Option 1 Connect to TV through HDMI ARC Best quality audio This product supports HDMI with Audio Return Channel ARC With the ARC feature you can hear the TV audio through this product by using a single HDMI cable EN y What you need e AHigh Speed HDMI Cable e Your V supports both HDMI ARC and HDMI CEC see the TV user manual for details For some TV models enable the external speaker output from the TV setting menu see the TV user manual for details 1 Using a High Speed HDMI cable conne
6. Always there to help you Register your product a em upport at www philips com suppor HTL3150B ER Contact Philips User manual PHILIPS Contents 1 Important Important safety instructions Care for your product Care of the environment Help and support 4 CJ GJ h2 nN 2 Your product 4 Main unit Remote control Connectors Wireless subwoofer AODOU 4s 3 Connect Placement Pair up with the subwoofer Connect audio from TV Connect audio from other devices SNO NN M M 4 Use your product Adjust the volume Choose your sound Play audio through Bluetooth MP3 player USB storage devices Auto standby Set display brightness Apply factory settings M NN O OGOGO N 5 Update software Check software version Update software via USB 2 N 6 Wall mount 3 7 Product specifications 4 8 Troubleshooting 5 9 Notice EN 16 1 Important Read and understand all instructions before you use your product If damage is caused by failure to follow instructions the warranty does not apply Important safety instructions e Read these instructions e Keep these instructions e Heed all warnings Follow all instructions e Do not use this apparatus near water e Clean only with dry cloth Do not block any ventilation openings Install in accordance with the manufacturer s instructions e Do not install near any heat sources such as radiators heat registers stov
7. I ARC source 5 On the remote control within six seconds press amp twice then Volume once and then hold down SURR MOIVE L gt On the display panel UPG upgrade blinks slowly then blinks quickly 6 When UPG blinks fast press amp to start the update L gt Then UPG upgrade is displayed on the display panel 7 Wait until the update is completed L gt If the update is complete this product automatically turns off and on again Caution Do not turn off the power or remove the USB storage device when the software update is in progress because you might damage this player 6 Wall mount Before wall mounting make sure the wall can support the weight of this product For wall mounting this product must be securely attached to the wall in accordance with the installation instructions Improper wall mounting may result in accident injury or damage If you have any query contact Consumer Care in your country Screw length diameter Depending on the type of wall mounting this product make sure that you use screws of a suitable length and diameter lt 9 mm 0 35 3 2 3 6 mm 0 13 0 14 i gt 25 mm 0 98 3 5 4 mm 0 14 0 16 See the illustration in the quick start guide on how to wall mount this product 1 Drill two holes on the
8. IO OUT 2 Press COAX on the remote control of this product to enable the coaxial connection Option 4 Connect to TV through analog audio cables Basic quality audio 1 Using an analog audio cable connect the AUX connectors on this product to the analog audio output on the TV e he analog audio output on the TV might be labeled AUDIO OUT 2 Press AUX on the remote control of this product to enable the analog audio connection Connect audio from other devices You may also play audio from other devices through the speakers of this product Option 1 Connect to other device through optical cable Best quality audio OPTICAL OPTICAL OUT E Bluray Dist 1 Using an optical cable connect the OPTICAL connector on this product to the optical output on the external device The digital optical output on the external device might be labeled OPTICAL OUT SPDIF or SPDIF OUT 2 Press OPTICAL on the remote control of this product to enable the optical connection Option 2 Connect to other device through coaxial cable Best quality audio 1 Using a coaxial cable connect the COAXIAL connector on this product to the coaxial output on the external device The digital coaxial output on the external device might be labeled COAXIAL DIGITAL OUT or DIGITAL AUDIO OUT 2 Press COAX on the remote control of this product to enable the coaxial connec
9. OGIC II Manufactured under license from Dolby Laboratories Dolby Pro Logic and the double D symbol are trademarks of Dolby Laboratories HIGH DEFINITION MULTIMEDIA INTERFACE The terms HDMI and HDMI High Definition Multimedia Interface and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries Bluetooth The Bluetooth word mark and logos are registered trademarks owned by Bluetooth SIG Inc and any use of such marks by Gibson Innovations Limited is under license Other trademarks and trade names are those of their respective owners 17 PHILIPS LIMITED WARRANTY ONE 1 YEAR WARRANTY COVERAGE PHILIPS warranty obligation is limited to the terms set forth below WHO IS COVERED Philips warrants the product to the original purchaser or the per son receiving the product as a gift against defects in materials and workmanship as based on the date of original purchase Warranty Period from an Authorized Dealer The original sales receipt showing the product name and the purchase date from an authorized retailer is considered such proof WHAT IS COVERED The Philips warranty covers new products if a defect in material or workmanship occurs and a valid claim is received by Philips within the Warranty Period At its option Philips will either 1 repair the product at no charge using new or refurbished replacement parts or 2 exchange t
10. Play Pause Start pause or resume play in USB mode BASS Increase or decrease bass Volume control e Increase or decrease volume 1 amp Mute or restore volume MUSIC Select stereo sound mode for the best music experience AUDIO SYNC Increase or decrease audio delay DIM Set the brightness of the display panel for this product NIGHT Turn night mode on or off SURR MOIVE Select surround sound mode for the best movie experience VOICE Select voice sound mode to enhance voice clarity TREBLE Increase or decrease treble EN 5 Connectors This section includes an overview of the connectors available on this product p ae O e OPTICAL DIGITAL IN AUX RED 9 e AUX the n HDMI OUT ARC TOTV Connect to the HDMI ARC input on the TV 2 DCIN Connect to the power supply AUX IN L R Connect to an analog audio output on the TV or an analog device DIGITAL IN COAXIAL Connect to a coaxial audio output on the TV or a digital device DIGITAL IN OPTICAL Connect to an optical audio output on the TV or a digital device HDMI ouni ass COAXIAL IGITAL IN lt gt USB Connect to a USB storage device for audio media play Upgrade software of this product Charge a USB device 7 AUDIO IN Audio input from
11. connection see the user manual of the Bluetooth device on how to enable Bluetooth L gt During connection BT on the display panel blinks J Wait until this product beeps L gt When the Bluetooth connection succeeds BT is displayed on the display panel L gt f the connection fails BT on the display panel blinks continuously 4 Select and play audio files or music on your Bluetooth device During play if a call is coming music play is paused Play resumes when the call ends this feature is dependent on the connected mobile phone e f your Bluetooth device supports AVRCP profile on the remote control you can press I4 PI to skip to a track or press I to pause resume play 5 To exit Bluetooth select other source e When your switch back to Bluetooth mode Bluetooth connection remains active The music streaming may be interrupted by obstacles between the device and this product such as wall metallic casing that covers the device or other devices nearby that operate in the same frequency f you want to connect this product with another Bluetooth device press and hold Q on the remote control to disconnect the currently connected Bluetooth device MP3 player Connect your MP3 player to play your audio files or music What you need e An MP3 player A 3 5mm stereo audio cable 1 Using the 3 5mm stereo audio cable connect the MP3 player to the AUDIO IN connector on this product
12. ct the HDMI OUT ARC connector on this product to the HDMI ARC connector on theTV he HDMI ARC connector on the TV might be labeled differently For details see the TV user manual 2 On your TV turn on HDMI CEC operations For HDMI CEC issues on your TV see the TV user manual to make sure that the HDMI CEC setup is correct or contact the TV manufacturer if needed 3 Press HDMI ARC on the remote control of this product to enable the HDMI ARC connection Note Option 2 Connect to TV through optical cable Best quality audio OPTICAL DIGITALIN OPTICAL OUT 5 1 Using an optical cable connect the OPTICAL connector on this product to the optical output on the TV The digital optical output on the TV might be labeled OPTICAL OUT SPDIF or SPDIF OUT 2 Press OPTICAL on the remote control of this product to enable the optical connection Option 3 Connect to TV through coaxial cable Best quality audio COAXIAL 100 interoperability with all HDMI CEC devices is not guaranteed f your TV is not HDMI ARC compliant connect an audio cable to hear the TV audio through this product 8 EN 1 Using a coaxial cable connect the COAXIAL connector on this product to the coaxial output on the T V The digital coaxial output on the TV might be labeled COAXIAL DIGITAL OUT or DIGITAL AUD
13. d with the bundled product Philips is not liable for any damage to or loss of any programs data or other information stored on any media contained within the product or any non Philips product or part not covered by this warranty Recovery or reinstallation of programs data or other information is not covered under this Limited Warranty This warranty does not apply a to damage caused by accident abuse misuse neglect misapplication or non Philips product b to damage caused by service performed by anyone other than Philips or Philips Authorized Service Location c to a product or a part that has been modified without the written permission of Philips or d if any Philips serial number has been removed or defaced or e product accessories or consumables sold AS IS without warranty of any kind by including refurbished Philips product sold AS IS by some retailers This Limited Warranty does not cover Shipping charges to return defective product to Philips Labor charges for installation or setup of the product adjust ment of customer controls on the product and installation or repair of antenna signal source systems outside of the product Product repair and or part replacement because of improper installation or maintenance connections to improper voltage supply power line surge lightning damage retained images or screen markings resulting from viewing fixed stationary con tent for extended periods prod
14. e is displayed on the display panel When ERROR is displayed it indicates that an input audio format is not supported When ARC blinks it indicates that the connected TV is not HDMI ARC compliant or an unsupported audio format is detected Bluetooth A device cannot connect with this product The device does not support the compatible profiles required for this product e You have not enabled the Bluetooth function of the device See the user manual of the device on how to enable the function e The device is not correctly connected Connect the device correctly see Play audio through Bluetooth on page 10 e This product is already connected with another Bluetooth device Disconnect the connected device then try again Quality of audio play from a connected Bluetooth device is poor The Bluetooth reception is poor Move the device closer to this product or remove any obstacle between the device and this product The connected Bluetooth device connects and disconnects constantly The Bluetooth reception is poor Move the device closer to this product or remove any obstacle between the device and this product e Turn off Wi Fi function on the Bluetooth device to avoid interference For some Bluetooth the Bluetooth connection can be deactivated automatically to save power This does not indicate any malfunction of this product EN 15 9 Notice This section contains the lega
15. es or other apparatus including amplifiers that produce heat Do not defeat the safety purpose of the polarized or grounding type plug A polarized plug has two blades with one wider than the other A grounding type plug has two blades and a third grounding prong The wide blade or the third prong are provided for your safety If the provided plug does not fit into your outlet consult an electrician for replacement of the obsolete outlet e Protect the power cord from being walked on or pinched particularly at plugs convenience receptacles and the point where they exit from the apparatus e Only use attachments accessories specified by the manufacturer Use only with the cart stand tripod bracket or table specified by the manufacturer or sold with the apparatus When a cart is used use caution when moving the cart apparatus combination to avoid injury from tip over Unplug this apparatus during lightning storm or when unused for long periods of time Refer all servicing to qualified service personnel Servicing is required when the apparatus has been damaged in any way such as power supply cord or plug is damaged liquid has been spilled or objects have fallen into the apparatus the apparatus has been exposed to rain or moisture does not operate normally or has been dropped Battery usage CAUTION To prevent battery leakage which may result in bodily injury property damage
16. f this product 1 Press TREBLE or BASS to change the frequency Synchronize video and sound If the audio and video are not synchronized delay the audio to match the video 1 Press AUDIO SYNC to synchronize the audio with the video e AUDIO SYNC increases the sound delay and AUDIO SYNC decreases the sound delay Night mode For quiet listening night mode decreases the volume of loud sounds when audio is played Night mode is only available for Dolby Digital soundtracks 1 Press NIGHT to tum night mode on or off L gt When night mode is turned on ON NIGHT scrolls twice on the display panel Ly When night mode is turned off OFF NIGHT scrolls twice on the display panel Play audio through Bluetooth Through Bluetooth connect this product with your Bluetooth device such as an iPad iPhone iPod touch Android phone or laptop and then you can listen to the audio files stored on the device through the speakers of this product What you need A Bluetooth device which supports Bluetooth profile A2DP AVRCP and with Bluetooth version as 4 0 EDR e he maximum operational range between the main unit and a Bluetooth device is approximately 10 meters 30 feet 1 Press 8 on the remote control to switch this product to Bluetooth mode BT is displayed on the display panel blinking 2 On the Bluetooth device switch on Bluetooth search for and select Philips HTL3150 to start
17. he product with a product that is new or which has been manufactured from new or ser viceable used parts and is at least functionally equivalent or most comparable to the original product in Philips current inventory or 3 refund the original purchase price of the product Philips warrants replacement products or parts provided under this warranty against defects in materials and workmanship from the date of the replacement or repair for ninety 90 days or for the remaining portion of the original product s warranty whichever provides longer coverage for you When a product or part is exchanged any replacement item becomes your property and the replaced item becomes Philips property When a refund is given your product becomes Philips property Note Any product sold and identified as refurbished or renewed carries a ninety 90 day limited warranty Replacement product can only be sent if all warranty requirements are met Failure to follow all requirements can result in delay WHAT IS NOT COVERED EXCLUSIONS AND LIMITATIONS This Limited Warranty applies only to the new products manu factured by or for Philips that can be identified by the trademark trade name or logo affixed to it This Limited Warranty does not apply to any non Philips hardware product or any software even if packaged or sold with the product Non Philips manufacturers suppliers or publishers may provide a separate warranty for their own products package
18. hes to standby after 15 minutes of button inactivity and no audio video play from a connected device Set display brightness You can press DIM repeatedly to select a different brightness level of the display panel on this product If you select AUTO OFF LED message is switched off after 10 seconds of button inactivity Apply factory settings You can reset this product to the default settings programmed at the factory In any source mode on the remote control press Volume BASS and TREBLE in sequence within three seconds L gt When the factory settings restore is complete the product automatically switches off and restarts 5 Update software To get the best features and support update your product with the latest software Check software version In any source mode on the remote control press TREBLE BASS and Volume in sequence L gt The software version number is displayed on the display panel Update software via USB 1 Check the latest software version on www philips com support Search for your model and click on Software and drivers 2 Download the software into a USB storage device n Unzip the download if zipped and make sure that the unzipped file is named HTL3150 bin 2 Put the HTL3150 bin file in the root directory J Connect the USB storage device to the lt USB connector on this product 4 Press HDMI ARC to switch this product to the HDM
19. ing information please contact your local authorities For additional assistance on recycling options please contact www mygreenelectronics com or www elae org or www recycle philips com Where the MAINS plug or an appliance coupler is used as the disconnect device the disconnect device shall remain readily operable Do not place this apparatus on the furniture that is capable of being tilted by a child and an adult leaning pulling standing or climbing on it A falling apparatus can cause serious injury or even death This apparatus should not be placed in a built in installation such as a bookcase or rack unless proper ventilation is provided Make sure to leave a space of 7 8 inches 20cm or more around this apparatus Class Il equipment symbol This symbol indicates that the unit has a double insulation system Know these safety symbols This bolt of lightning indicates uninsulated material within your unit may cause an electrical shock For the safety of everyone in your household please do not remove product covering The exclamation point calls attention to features for which you should read the enclosed literature closely to prevent operating and maintenance problems WARNING To reduce the risk of fire or electric shock this apparatus should not be exposed to rain or moisture and objects filled with liquids such as vases should not be placed on this apparatus CAUTION T
20. l and trademark notices Notice of compliance The device complies with the FCC rules Part 15 Operation is subject to the following two conditions n This device may not cause harmful interference and Q This device must accept any interference received including interference that may cause undesired operation FCC rules This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference in a residential installation This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instruction manual may cause harmful interference to radio communications However there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception which can be determined by turning the equipment off and on the user is encouraged o try to correct the interference by one or more of the following measures e Relocate the receiving antenna Increase the separation between equipment and receiver Connect the equipment into an outlet on a circuit different from that to which the receiver is connected e Consult the dealer or an experienced radio TV technician for help 16 EN FCC Radiation Exposu
21. nd then enter your product model number Alternatively you can contact Consumer Care in your country Before you contact note down the model number and serial number of your product You can find this information on the back or bottom of your product 4 EN 2 Your product Congratulations on your purchase and welcome to Philips To fully benefit from the support that Philips offers e g notification of product software upgrade register your product at www philips com welcome Main unit This section includes an overview of the main unit PHILIPS Eo Do Switch this product on or to standby SOURCE Select an input source for this product Volume Increase or decrease volume Display panel Remote control This section includes an overview of the remote control e 2 og PHILIPS Standby On Switch this product on or to standby Source buttons COAX Switch your audio source to the coaxial connection OPTICAL Switch your audio source to the optical connection AUX Switch your audio source to the AUX connection AUDIO IN Switch your audio source to the MP3 connection 3 5mm jack USB Switch to USB mode 0 Switch to Bluetooth mode HDMI ARC Switch your source to HDMI ARC connection I4 BI Previous Next Skip to the previous or next track in USB mode gt IIl
22. o prevent electric shock match wide blade of plug to wide slot fully insert Care for your product Use only microfiber cloth to clean the product Care of the environment Disposal of your old product and battery eb Your product is designed and manufactured with high quality materials and components which can be recycled and reused This product may contain lead and mercury Disposal of these materials may be regulated due to environmental considerations For disposal or recycling information please contact your local authorities or visit www recycle philips com This product contains batteries e Dispose of batteries properly Do not incinerate Batteries may explode if overheated Do not wrap in metal or aluminum foil Wrap in newspaper before discarding e tis suggested that you contact your local own or city to determine proper battery redemption site s in your area Please visit www call2recycle org for additional information on a recycling center in your area for rechargeable batteries EN 3 Help and support For extensive online support visit www philips com support to e download the user manual and the quick start guide e watch video tutorials available only for selected models e find answers to frequently answered questions FAOs email us a question e chat with our support representative Follow the instructions on the website to select your language a
23. or allow limitations on how long an implied warranty lasts so the above limitations or exclusions may not apply to you This warranty gives you specific legal rights You may have other rights which vary from state province to state province P amp F USA Inc PO Box 2248 Alpharetta GA 30023 2248 18 3140 035 51091 PHILIPS Specifications are subject to change without notice 2015 Gibson Innovations Limited All rights reserved This product has been manufactured by and is sold under the responsibility of Gibson Innovations Ltd and Gibson Innovations Ltd is the warrantor in relation to this product Philips and the Philips Shield Emblem are registered trademarks of Koninklijke Philips N V and are used under license from Koninklijke Philips N V XX HTL3150B 37 UM V1 0 amp
24. re Statement This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment This equipment should be installed and operated with a minimum distance of 20cm between the radiator and your body This transmitter must not be co located or operated in conjunction with any other antenna or transmitter Warning Any changes or modifications made to this device that are not expressly approved by Gibson Innovations may void the user s authority to operate the equipment Model number HTL3150B 37 Trade Name Philips Responsible Party Gibson Innovations USA Inc 3070 Windward Plaza Suite F Box 735 Alpharetta GA 30005 Canada CAN ICES 3 B NMB 3 B This device complies with Industry Canada s licence exempt RSSs Operation is subject to the following Two conditions 1 this device may not cause harmful interference and 2 this device must accept any interference received including interference that may cause undesired operation The device meets the exemption from the routine evaluation limits in section 2 5 of RSS 102 and compliance with RSS 102 RF exposure users can obtain Canadian information on RF exposure and compliance This transmitter must not be co located or operating in conjunction with any other antenna or transmitter This equipment should be installed and operated with a minimum distance of 20 centimeters between the radiator and your body I DOLBY DIGITAL PRO L
25. tion Option 3 Connect to other device through analog audio cables Basic quality audio 1 Using an analog audio cable connect the AUX connector on this product to the analog audio output on the external device e The analog audio output on the external device might be labeled AUDIO OUT 2 Press AUX on the remote control of this product to enable the analog audio connection EN 9 4 Use your product This section helps you use this product to play media from a wide range of sources Before you start Make the necessary connections described in the quick start guide or download the user manual from www philips com support e Switch this product to the correct source for other devices Adjust the volume 1 Press Volume to increase or decrease a volume level o mute sound press amp To restore the sound press amp again or press Volume Choose your sound This section helps you choose the ideal sound for your video or music Surround sound mode Experience an immersive audio experience with surround sound modes e Press SURR MOIVE to create a surround listening experience Ideal for watching movie e Press MUSIC to create stereo sound Ideal for listening to music e Press VOICE to create sound effect which makes human voice more clear and outstanding for listening Equalizer Change the high frequency treble and low frequency bass settings o
26. uct cosmetic appearance items due to normal wear and tear unauthorized repair or other cause not within the control of Philips Damage or claims for products not being available for use or for lost data or lost software Damage from mishandled shipments or transit accidents when returning product to Philips A product that requires modification or adaptation to enable it to operate in any country other than the country for which it was designed manufactured approved and or authorized or repair of products damaged by these modifications A product used for commercial or institutional purposes including but not limited to rental purposes Product lost in shipment and no signature verification receipt can be provided Failure to operate per Owner s Manual TO OBTAIN ASSISTANCE IN THE U S A CANADA PUERTO RICO OR U S VIRGIN ISLANDS Contact Philips Customer Care Center at 1 866 309 0845 REPAIR OR REPLACEMENT AS PROVIDED UNDER THIS WARRANTY IS THE EXCLUSIVE REMEDY FOR THE CON SUMER PHILIPS SHALL NOT BE LIABLE FOR ANY INCIDEN TAL OR CONSEQUENTIAL DAMAGES FOR BREACH OF ANY EXPRESS OR IMPLIED WARRANTY ON THIS PROD UCT EXCEPT TO THE EXTENT PROHIBITED BY APPLICABLE LAW ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ON THIS PRODUCT IS LIMITED IN DURATION TO THE DURATION OF THIS WARRANTY Some states do not allow the exclusions or limitation of inciden tal or consequential damages
27. wall 2 3 Secure the dowels and screws in the holes Hang this product on the fastening screws EN 13 7 Product specifications Note Specifications and design are subject to change without notice Amplifier e FIC total output power 66 W Main unit 60 W 1 THD 4 ohm 400 Hz 20 kHz Subwoofer 6W 1 THD 3 ohm 40 Hz 100 Hz e otal output power 150 W RMS 1 dB 10 THD e Frequency response 20 Hz 20 kHz 3 dB Signal to noise ratio 7 65 dB CCIR A weighted lnput sensitivity e AUX 2V e AUDIO IN 1V Audio e S PDIF Digital audio input Coaxial IEC 60958 3 Optica TOSLINK Main unit e Power supply e Model Philips branded AC power adapter NU040A320125 Input 100 240 V 50 60 Hz 1 5 A Output 32V 1 25 A Standby power consumption 0 5 W Dimensions W x H x D 950 x 51 x 69 mm 37 4 x 2 x 2 7 e Weight 1 7 kg 3 7 Ibs Built in speakers Drivers 3 x full range 90mm 3 5 x 34mm 1 3 Impedance 4 ohm e Operating temperature and humidity 0 C to 45 C 5 to 90 humidity for all climates Storage temperature and humidity 40 C to 70 C 526 to 95 Subwoofer e Power supply 100 240 V 50 60 Hz Power consumption 30 WV Standby power consumption 0 5 W e Impedance 4 ohm Speaker driver 1 x 134 mm 5 25 woofer Dimensions W x H x D 165 x 240 x 226 mm 65
Download Pdf Manuals
Related Search