Vapamore Forza Commercial Steam Cleaner Owner`s Manual
Contents
1. is 17 m m RE 8 STEAM CLEANER INSTRUCTION BOOK AND USERS GUIDE SAFETY INFORMATION GO TO VAPAMORE COM TO SEE THE MR 1000 FORZA INSTRUCTIONAL VIDEO FAILURE TO FOLLOW SAFETY INFORMATION AND WARNINGS MAY CAUSE PERMANENT DAMAGE AND VOID PRODUCT WARRANTY 1 Do not leave the steam cleaner unattended when plugged in Unplug from socket when not in use 2 To prevent electric shock use only with a grounded outlet 3 Not to be used as a toy Close supervision is necessary when used near children 4 Use only as described in this manual 5 Do not use with a damaged cord or plug If the supply cord and or plug is damaged they must be replaced by Vapamore in order to prevent a fire hazard 6 Do not pull or carry by the cord use the cord as a handle allow the cord to come into contact with hot or sharp surfaces or close a door on the cord 7 Do not unplug by pulling on the cord 8 Do not handle the plug or steam cleaner with wet hands 9 Do not pull or drag steam cleaner using the steam gun and hose 10 Only carry the steam cleaner by the handle 11 Turn off all controls before unplugging 12 Steam cleaner must be level and on the floor during use 13 Do not use an extension cord 14 Do not attempt to remove blockages with sharp objects as they may cause damage 15 Store indoors put away after use to prevent tripping accidents 16 Using improper voltage ma2. Levolor Venetian Horizontal Vertical Low Medium Detail Nozzle Extension Test a small area first Use jet or detail Tubes Cotton Towel nozzle from 4 away Wipe off with cotton towel GLASS Pre steam glass from 6 away to heat Smooth Surface Squeegee glass Use brush for edges and bases Windows Mirrors Medium Extension Tubes Nylon Finish with window cleaner squeegee Do Brush Paper Towels not use if temperature is under 32 degrees to prevent cracking Window Screens Window Frames Medium High Detail Nozzle Nylon Brush Steam area with detail nozzle Use brush Extension Tubes for edges and corners KITCHENS Nylon Brush Brass Brush Use nylon brush over all surfaces and Stove Tops Ovens Medium High Extension Tubes Paper brass brush for interior oven grates Wipe towels down with paper towels Use brush over all areas and detail nozzle Nylon Brush Detail Nozzle Small Appliances Medium for small corners and seems Wipe down Paper towels f with paper towels f Nylon Brush Detail Nozzle Use brush over all areas and detail nozzle Sinks Faucets Drains Medium High for small corners and seems Wipe down Paper towels with paper towels Counter Tops Low Medium Smooth Surface Sqeegee Nylon Brush Detail Nozzle Paper towels Use brush over all areas and detail nozzle for small corners and seems Use smooth surace squeege to sanitize counter tops by slowly passing over area then wipe ar
3. A IMPORTANT The housing and accessories become hot during operation Allow the steam cleaner to cool down before changing the accessories A IMPORTANT Always ensure the steamer is on a level floor or flat surface when in operation Do not tip or tilt the steam cleaner during use ACCESSORIES AND TOOLS GO TO VAPAMORE COM TO SEE THE MR 1000 FORZA INSTRUCTIONAL VIDEO A IMPORTANT Never operate machine without water the main tank Fig 1 and holder Accessory storage hs basket Accessories twist lock onto the accessory tool adapter Accessory tool adapter attaches to the steam gun or extension tubes Use large elbow adapter for floor heads and triangle brush Use with steam gun r extension tubes Trigger lock Extension tubes lock and release ACCESSORIES The MR 1000 Forza has an accessory and tool basket Once all the accessories and tools have been unpacked use the accessory storage bag and basket to carry all the accessories and tools The MR 1000 Forza includes a water bottle holder that can be used for the included water bottle or most any other drink bottle or cup The water bottle holder fits over the front top rail on the accessory and tool basket Fig 1 The accessory tool adaptor 4 on parts overview page is required when using the jet nozzle attachment detail scraper and all round detail brushes 5 12 on
4. Cause The internal parts have been clogged by debris or hard water build up Solution Call us at 480 951 8900 or e mail us at info vapamore com to schedule a repair A IMPORTANT To provide continued protection against risk of electric shock connect to properly grounded outlets only Not for space heating purposes GO TO VAPAMORE COM TO SEE THE MR 1000 FORZA INSTRUCTIONAL VIDEO APPLICATION STEAM VOLUME ATTACHMENT TECHNIQUE FLOORS CHEMICAL FREE CLEANING WITH NO RESIDUE LEFT BEHIND Floor Cleaning Head Sweep or vacuum first Steam mop with Vinyl Tile Or Vinyl Sheet Medium High Micro fiber Extension floor cleaning head and micro fiber cover Tubes Nylon Brush Corners and baseboards with nylon brush Sweep or vacuum first Steam mop with Floor Cleaning Head floor cleaning head heavy stains use j papan Micro Fiber Extension without micro fiber cover Corners and Stone Tile Slate Ceramic Tile Grout High Tubes Nylon Brush baseboards with nylon brush Grout lines Grout Brush Nylon Brush use grout brush and or jet nozzle Finish Jet Nozzle with floor cleaning head micro fiber cover Sweep or vacuum first Steam mop with Floor Cleaning Head floor cleaning head heavy stains use Smooth Surface Concrete High Micro Fiber Extension without micro fiber cover Corners and Tubes Grout Brush Nylon Brush Metal Brush Jet Nozzle baseboards with nylon brush Joint lines use grout or met
5. and when refilling the cold water tank when empty you will hear the pump fill the boiler from the cold water tank Once the pump is running hold the steam gun trigger down for 15 20 seconds to release the air trapped in the boiler TROUBLESHOOTING PROBLEM Operating pilot lamp fails to light Cause The steam cleaner is not plugged into a socket or is not switched on Solution Insert the main plug into a socket or switch the steam cleaner on Cause The socket is faulty Solution Check the socket by unplugging the steam cleaner and plugging in a different appliance Cause The protection circuit breaker has been tripped Push in the reset button located on the rear of the machine to reset If the breaker trips again call us at 480 951 8900 or e mail us at info vapamore com to schedule a repair Cause One of the ETL protection devices has been triggered or the power cord has been damaged Call us at 480 951 8900 or e mail us at info vapamore com to schedule a repair PROBLEM No steam is emitted when the steam button is pressed Cause The main water tank and boiler are empty Solution Fill tank with water Cause The steam gun hose socket is not plugged in correctly Solution Check and replug in the socket until the two locking tabs click PROBLEM Only a very small amount of steam flows out Cause The steam controller is set to minimum Solution Turn the steam controller counter clockwise until sufficient steam is emitted
6. parts overview page Align the accessory with the arrow on the accessory tool adapter and twist to lock into place The accessory tool adapter can be used directly on the steam gun or can be used with the extension tubes Fig 2 and 3 The large elbow adaptor 14 on parts overview page is required when using the floor heads or triangle corner brush 15 17 on parts overview page With the large elbow adapter facing down insert into the floor heads or triangle brush until completely inserted then rotate up The adapter will only insert when facing down and then locks into position and allows the adapter to rotate when in use The large elbow adapter can be used directly on the steam gun or can be used with the extension tubes Fig 4 The smooth surface squeegee detail jet tool and the bed bug fabric tool 20 22 on parts overview page can be connected directly to the steam gun or the extension tubes Fig 5 STEAM GUN EXTENSION TUBES The steam gun connects to the steam socket located on the front panel of the machine Flip the dust cover open and push the hose connector firmly into the socket until both tabs click into place Remove the steam hose by pressing in both release tabs while pulling out The steam gun has a trigger ON lock located just behind the trigger This lock can be used for continuous steam without having to hold the trigger To set the lock push down the trigger then while the trigger is down slide the
7. the basket and handle screw hole locations and insert the Allen head screws loosely until all screws are in place Once all screws are in place Secure all screws firmly with the supplied Allen tool Fig 2 CORD REEL The cord reel hooks rotate by pulling outward from the steamer then twisting to rotate Use this rotate function to easily remove the power cord and to position the hooks for cord storage Use the Velcro cord strap to secure the cord during transport Fig 2 NOTE At first start up and when refilling the cold water tank when empty you will hear the pump fill the boiler from the cold water tank Once the pump is running hold the steam gun trigger down for 15 20 seconds to release the air trapped in the boiler A NOTE Always test the steam cleaner first on inconspicuous or invisible areas of the surfaces or fabrics to be cleaned to check their tolerance to hot steam Steam may result in bleaching of painted varnished wood Steam may discolor shiny plastics Acrylic velvet and linen react very sensitively to the hot steam NOTE Vapamore cannot be held responsible for damage to objects materials people animals or plants that occurs due to unsuitable use of hot steam or due to improper use of the appliance A NOTE The Forzais fitted with an overheating cut out The steam cleaner switches off automatically if over pressure or over temperature is detected
8. IANGLE CORNER BRUSH The triangle corner brush can be used on upholstery carpets and furniture along with textured floors cement Fig 4 or tile along with any uneven surface or where extra scrubbing strength is needed Fig 4 with all bristle or brush tools let the steam do the work AN with just light pressure applied to the brush H Use large elbow adapter for triangle brush DETAIL JET TOOL JET NOZZLE The detail jet tool can be attached directly to the steam Fig 5 gun or to any of the extension tubes The jet nozzle attachment is used with the accessory tool adapter These tools are great for removing soap scum in the bath shower and faucets Also for cleaning tight areas such as toilet seat hinges where high pressure steam can reach and blow out dirt and debris These tools are most effective when applied direct to the surface being cleaned The steam temperature will condense and cool within 1 of the tool tip Fig 5 e Jet nozzle on accessory fool adapter OPERATION GO TO VAPAMORE COM TO SEE THE MR 1000 FORZA INSTRUCTIONAL VIDEO Fig 1 BRUSHES There are 6 brush types supplied with the Vapamore MR 1000 Forza The brushes attach to the accessory tool adapter by aligning the arrows and twisting to lock Suggested uses Metal brushes Oven grills BBQ grates cement stains machinery and metal surfaces Nylon medium duty and large nylon brush used for more sensitive materials such as blin
9. al brush and or jet nozzle Finish with floor cleaning head micro fiber Hardwood Low Medium Floor Cleaning Head Micro Fiber Extension Tubes Sweep or vacuum first Steam mop with floor cleaning head and micro fiber cover CARPETS SPOT TREATMENT Wall To Wall Rugs Spot Care High Nylon Brush Jet Nozzle Paper Or White Cotton Towel Vacuum area first then steam using brush or jet Use towels to blot stain away Chemical cleaner can be used prior to steam treatment CARPETS DEOTERIZE KILL BEDBUGS DUST MITES AND ALLERGENS Wall To Wall Rugs High Floor Cleaning Head Extension tubes Micro Fiber Jet Nozzle Vacuum area first then steam using floor cleaning head with micro fiber cover Pass slowley over area to allow heat to kill pests Use jet nozzle for corners and cracks WALLS CEILINGS Painted Wood Paneling Wallpaper Low Medium Floor Cleaning Head Extension tubes Micro Fiber Nylon Brush Clothes Fabric tool with cotton cover Painted wood paneling wallpaper walls are heat sensitive Always test small area first and be careful not to over heat finish Use Floor Cleaning head with micro fiber cover or clothes steamer with cotton cover Use nylon brush for corners and stains Nylon Brush Jet Nozzle Use at full power to soften glue and Wallpaper Removal High Extension Tubes Smooth remove wallpaper Wallpaper s
10. ater tank fill screen at least once a quarter every 3 months depending on frequency of use to be sure there is no trapped debris in the screen Remove the screen by pulling up and out of the fill neck Wash the screen under running water then replace A IMPORTANT Never fill the cold water tank without this screen in place Failure to do so can allow debris to enter the system and void the warranty The included micro fiber cover and cotton cover can be machine washed using normal detergents and wash cycle STORAGE TRANSPORTING SHIPPING Fig 1 The cold water tank and main boiler tank should be emptied before storing for any extended period of time 30 days or more or every 3 months of use to help remove i any debris that may have collected in the tanks Make sure Le the steamer is unplugged and completely cooled down 2 before emptying the tanks The cold water tank has a drain located on the underside closest to the right rear wheel E Remove the drain cap to drain the cold water tank then replace and tighten the cap Do not overtighten the cap as you may damage the seal The boiler drain is located on the underside in the center of the steamer The steamer MUST be 100 cooled down and have no pressure stored in the tank to remove this cap Remove the drain cap to drain the boiler then replace and tighten the cap Do not overtighten the cap as you may damage the seal Fig 1 A IMPORTANT Nev
11. ce Failure to do so will void the warranty To fill the cold water tank remove the rubber tank cap NOTE located on the top of the machine and using the Domnot over nll supplied funnel fill the tank 4 2 Itr 80 gal If filling without measuring fill to the mid level of the fill neck screen Fig 1 Make sure the steam gun and hose is plugged into the machine before startup Plug the machine into a proper wall outlet and switch on At first start up you will hear the pump fill the boiler from the cold water tank Once the pump is running hold the steam gun trigger down for 15 20 seconds to release the air trapped in the boiler Once the boiler is full the pump will stop and the red status light will light up showing the boiler is now Status light Water fill ight heating the water Once the boiler is at operating temperature the status light turns to green indicating the steamer is ready for use Initial start up from cold machine is aprox 9 min The status light will cycle red to green during use as the boiler maintains the temperature During use the steamer will continuously fill the boiler from the cold water tank Once the cold water tank and boiler reach a low level the yellow fill light will light up and an audible beep will sound to let the user know to refill the cold water tank Refill the cold water tank remove the rubber tank cap and fill to the mid level of the fill neck screen Fig 2 Fig 3 The flow ra
12. ch as bedding furniture and carpet areas Start by installing the supplied micro fiber cover on the floor cleaning head The micro fiber cover thermal core maintains full temperature during use and allows the floor cleaning head to glide over fabric or carpet Fig 2 Apply light consistent pressure and slowly pass it along the surface 1 per second to ensure the area being treated has a chance to come to full temperature thereby killing pests and their eggs Fig 3 m 7 accessory tool adaptor the detail jet tool can be used on their own These tools are great for cracks and crevices Make sure to concentrate the steam directly on the area to be treated with as minimal distance as possible The steam will condense and cool off and will Accessory tool not kill pests and their eggs if the jet tip is not directly on adaptor the surface being treated The accessory tool adaptor or the detail jet tool can be Detail jet tool attached directly to the steam gun or to any of the extension tubes Fig 4 CLEANING STORAGE GO TO VAPAMORE COM TO SEE THE MR 1000 FORZA INSTRUCTIONAL VIDEO CLEANING MAINTENANCE Always ensure before cleaning or maintaining the Vapamore MR 1000 Forza that it is switched off and unplugged from the wall outlet Only clean the outer surface with a water moistened cloth Do not use any cleaning agents abrasives or alcohol since they may damage the housing finish Clean the cold w
13. ds carpet furniture air vents shoe scuffs soap scum Nylon grout brush this brush is used for harder less sensitive areas such as grout lines on tile floors stone cement and machinery A IMPORTANT With all brushes it is important to not apply excessive pressure or force This can cause failure of the detail adaptor or related parts When using the brushes let the steam do the work and the brush to help agitate the stain or area being cleaned Fig 1 2 SCRAPER TOOL The scraper tool can be used to defrost freezers on oven walls and cook top surfaces to remove stuck on food This tool is also good for removing wall paper paint and shelve paper and gum Fig 3 BED BUG FABRIC TOOL Start by installing the supplied cotton cover on the Bed bug fabric tool Now this tool can be used for steaming and sanitizing along with eliminating odors in garments fabrics furniture curtains drapes etc Fig 4 Bed bugs allergens and mold Use this tool on bedding pillows and furniture by applying light pressure and slowly passing it along the surface to kill Bedbugs dust mites and other allergens See bed bug dust mite allergens page for details Fig 4 Sanitize counter tops tile stone granite glass stainless steel walls etc Use with extension tubes or direct gun SMOOTH SURFACE SQUEEGEE TOOL Using the smooth surface squeegee tool is great for sanitizing kitchen and bathroom coun
14. ea with paper towel for chemical free cleaning BATHROOM NOTE HARD WATER AND CALCIUM STAINS CAN ONLY BE REMOVED WITH CHEMICALS Sweep or vacuum first Steam mop with Floor Cleaning Head floor cleaning head heavy stains use Tile Grout Medium High Micro Fiber Extension without cotton cover Corners and Tubes Grout Brush Jet baseboards with nylon brush Grout lines Nozzle use grout brush and or jet nozzle Finish with floor cleaning head with micro fiber Nylon Brush Detail Nozzle Use brush over all areas and detail nozzle Porcelain Toilets Chrome Fixtures Medium High gt for small corners hinges and seems Wipe Paper towels down with paper towels Nylon Brush Detail Nozzle Use brush over all areas and detail nozzle Shower Tubs Doors Medium Extension Tubes Paper for small corners and seems Wipe down towels with paper towels AUTO MOTORCYCLE MARINE Test a small area first Some synthetic Nylon Brush Jet Nozzle materials will not handle high heat Use Interior Areas Medium High Clothes Steamer Cotton nylon brush with soft pressure for larger Cover Cotton Towel stains and jet tip for small stains Blot with cotton towel Detailing Exterior Engine Medium High Nylon Brush Detail Nozzle Use brush over all areas and detail nozzle Jet Nozzle for small detail areas NEED HELP Visit www vapamore com to see video demonstrations and tips along with full details
15. er ship or transport the machine with water in the cold water tank The cold water tank MUST be completely emptied prior to shipping or transporting the machine Falure to do so can cause water to enter the machines internal parts and void the warranty ACCESSORIES Make sure all the o rings are in place on the accessory tools and adapters A silicon lube can be used on these o rings to help maintain a long use life Parts extension tubes and accessories can be stored in the supplied accessory storage bag and the storage basket located on the back of the steamer The steam gun and hose can remain plugged into the steamer and also be stored in the storage basket Replacement accessories and parts are available to order online at vapamore com or by calling Vapamore at 480 951 8900 TROUBLESHOOTING GO TO VAPAMORE COM TO SEE THE MR 1000 FORZA INSTRUCTIONAL VIDEO PROBLEM What do do if the machine or an accessory becomes damaged or broken Visit www vapamore com for a complete list of parts and accessories available for purchase or simply call us at 480 951 8900 or e mail us at info vapamore com to purchase replacement parts or schedule a repair WE ARE HERE TO HELP A IMPORTANT Do not return to the place of purchase for warranty or repairs Only Vapamore is authorized to facilitate all repairs to keep the highest quality and ETL standards Repairs or tampering by any other party will void the Warranty NOTE At first start
16. eration 31 Do not use the steam cleaner to treat any items of clothing that are still being worn on the body 32 The force and heat of the steam may have an adverse effect on some materials Always check whether a surface is suitable for treatment with the steam cleaner by carrying out a test beforehand on a concealed area 33 Always include these operating instructions if passing the steam cleaner on to a third party 34 Never aim the steam cleaner at people animals or plants risk of scalding Do not aim the steam cleaner at electrical systems 35 Do not leave the steam cleaner on and unattended Always switch the steam cleaner off and remove plug from wall outlet when unattended 36 The steam cleaner is fitted with a thermostat and a thermal cut out as protection against overheating PARTS OVERVIEW GO TO VAPAMORE COM TO SEE THE MR 1000 FORZA INSTRUCTIONAL VIDEO IDA 4 ke a 19 18 o p 2 SN PARTS LIST 1 Funnel 2 Water bottle amp holder 3 Steam gun with hose and connector 4 Accessory tool adapter 5 Jet nozzle attachmentx 2 6 Detail scraper x 2 7 Nylon brush groutx 4 8 Nylon brush mediumx 4 9 Nylon brush largex 4 10 Metal brush small brass x 4 11 Metal brush large brass x 4 12 Metal brush large stainless steel x 4 13 Cotton cover x 4 14 Large elbow adapter 15 Floor head with bristles 16 Floor head smooth surface 17 Triangle corner brush 18 Steam cleaner 19 Exte
17. lock to hold the trigger Extension tubes can be used for floors or difficult to reach areas The extension tubes push and lock into place on the steam gun Fig 6 FILLING amp OPERATION GO TO VAPAMORE COM TO SEE THE MR 1000 FORZA INSTRUCTIONAL VIDEO GENERAL FUNCTION The MR 1000 Forza is a continuous flow steamer that uses a cold water tank with a capacity of 4 2 Itr 80 gal that fills the boiler tank as needed to create steam When first turned on and during operation the boiler will call for water from the cold water tank to maintain steam pressure for continuous flow Once the cold water tank and boiler reach a low level the yellow fill light will light up and an audible beep will sound to let the user know to refill the cold water tank The boiler cut off is set to 6 bar just over 90 psi The steam pressure will fluctuate as the steamer is being used and the boiler cycles on and off during use A IMPORTANT Only fill with distilled water without additives of any kind such as perfumes or cleaning agents Using additives of any kind will void the warranty A IMPORTANT Only fill with distilled water Using hard mineral heavy water will clog internal components and can cause failure to internal parts and void the warranty A IMPORTANT The fill neck of the cold water tank has a screen in place to help prevent debris from entering the steamers internal components Never fill the cold water tank without this screen in pla
18. nsion tubes x 2 20 Smooth surface squeegee 21 Detail jet tool 22 Bed bug fabric tool 23 Micro fiber floor pad x 4 24 Accessory storage bag 25 Replacement o ring set 26 Assembly screws amp tools not shown TECHNICAL SPECIFICATIONS Model MR 1000 Forza Power supply 115V 60Hz Heating element 1700w 14AMP Steam Pressure 6BAR 90PSI PEAK Tank capacity 4 2LTR 1 1 GAL Boiler capacity 3LTR 8 GAL Heating time 9 MIN Boiler temp 160C 320F Steam temp at tip 140C 284F PEAK Power cord length 25 Steam hose length 8 Gross weight 20 4 KG 45LBS GETTING STARTED GO TO VAPAMORE COM TO SEE THE MR 1000 FORZA INSTRUCTIONAL VIDEO Once unpacked the only items that need to be installed are the rear wheels the storage basket and the rear handles All the necessary tools and hardware are included to install these items Fig 1 WHEEL INSTALLATION Install the rear wheels using the supplied tools along with the supplied wheel bolt washers and lock nut The wheel bolt is inserted into the wheel followed by a washer then inserted into the steamer wheel mount Once inserted install the other washer and the lock nut Tighten lock nut Fig 1 VIU Lock bolt Washer Wheel bolt BASKET amp HANDLES The basket and handles are secured to the main steamer body using 6 of the supplied Allen head style screws Note there are extra Allen head screws provided Align
19. opy of the original purchase receipt to Vapamore 7464 East Tierra Buena Lane Suite 108 Scottsdale AZ 85260 within 15 days from the original purchase date Should any defect covered by the terms of this lifetime limited warranty be discovered Vapamore will repair or replace any defective part provided the unit is returned by the original purchaser listed on the warranty form on file The liability under this warranty is limited solely to the cost of the replacement parts or the complete unit at the discretion of Vapamore This warranty is void if damage is resulting from accident misuse improper operation unauthorized repair or alteration tampering substance other than clean water used in the boiler tank hard water calcium or mineral build up or damages accuring in transit This warranty does not cover any shipping fees to or from our facility This warranty is extended to the original purchaser only and excludes all other legal and or conventional warranties The responsibility of Vapamore if any is limited to the specific obligations expressly assumed by it under the terms of the lifetime limited warranty In no event is Vapamore liable for incidental or consequential damages of any kind whatsoever Customer is responsible for all shipping fees to and from our facility Carefully pack returning items for repair to avoid damage in transit Main water tank must be empty of all water before shipping Failure to do so will void this warrant
20. or simply call us at 480 951 8900 or E mail us at info vapamore com WE ARE HERE TO HELP LIFETIME Lifetime Limited Warranty for the Oapamore MR 1000 Forza Steam Cleaner Overview and terms of the Limited Lifetime Warranty Coverage 1 Lifetime parts and labor on the boiler heating element and all internal electronics The Vapamore MR 1000 Forza Steam Cleaning System boiler tank heating element and all internal electronic parts are lifetime warranted to be free from defects in material and workmanship when utilized by the original purchaser only This warranty does not cover damage due to hard water calcium or mineral build up on internal parts including but not limited to the boiler heating element solenoid pump internal valves and fittings 2 One 1 year parts and labor on accessories and housing The Vapamore MR 100 Steam Cleaning System accessories and housing are warranted to be free from defects in material and workmanship for a period of one 1 year from the date of purchase when utilized by the original purchaser only This does not include replacement of items due to wear including but not limited to the Floor Brush Nylon Brush Grout Brush Metal Brush Jet tip Clothes Steamer Cotton Cover Floor Brush Cotton Micro Fiber Cover For this warranty to apply the original purchaser must return the warranty registration form included in the original packaging or available online at vapamore com along with a c
21. te of the steam emitted can be regulated by turning the steam controller and can be adjusted to the level required Turn the controller knob clockwise to increase the steam output and counter clockwise to Use steam controller R output knob to adjust steam reduce the steam output Fig 3 output level OPERATION GO TO VAPAMORE COM TO SEE THE MR 1000 FORZA INSTRUCTIONAL VIDEO ACCESSORIES FLOOR CLEANING HEAD Fig 1 Attach the floor cleaning head to the end of the CLICK extension tube use 1 to 2 tubes as desired Ensure that the floor cleaning head clicks into place Fig 1 Tools click int gt 2 The floor head smooth surface is used with the micro fiber pad for hard surface areas Place the floor cleaning head on the micro fiber pad and secure the overhanging material under the clips located on each side of the floor cleaning head Fig 2 The floor head smooth surface is ideal for stone tile vinyl and wood floors along with cleaning washable walls and any hard surface It can also be used to sanitize deoterize kill allergens bed bugs and dust mites Attach the micro fiber pad to allow the floor cleaning head to glide when using on carpet Fig 3 The floor head with bristles can be used on textured floors cement or tile along with any uneven surface or where extra scrubbing strength is needed with all bristle or brush tools let the steam do the work with just light pressure applied to the brush TR
22. ter tops chemical free along with smooth surfaces such as stone granite wood glass tile and stainless steel Fig 5 BEDBUG DUST MITES ALLERGENS GO TO VAPAMORE COM TO SEE THE MR 1000 FORZA INSTRUCTIONAL VIDEO WHY USE STEAM The Vapamore MR 1000 Forza produces steam with an output temperature between 210 to 240 degrees Pests such as bedbugs dust mites and other allergens along with their eggs are killed on contact at a temperature of 180 degrees Using steam is an extremely effective and chemical free way to kill these pest along with E Coli Salmonella H1N1 and other bacteria or viruses without leaving any harmful chemical residue behind The tools supplied with the Vapamore MR 1000 Forza allow you to treat all areas where these pests can hide such as bedding sofas furniture pillows carpet cracks and crevices that are ideal hiding places for pests BEDDING FURNITURE Fig 1 The bed bug fabric tool with cotton cover is ideal for treating bedding furniture pillows and carpet areas around bed posts and base boards Start by installing the supplied cotton cover on the clothes fabric smooth surface tool Apply light consistent pressure and slowly pass it along the surface 1 per second to insure the area being treated has a chance to come to full temperature killing pests and their eggs Fig 1 The floor cleaning head with micro fiber cover is also great for treating large surface areas su
23. tripper can Surface Tool Scraper be applied first Nylon Brush Jet Nozzle ers Air Vents Medium High Extension Tubes Cotton Clean using brush and jet tip Wipe down with clean cotton towel Towel UPHOLSTERY SPOT TREATMENT Test a small area first Some synthetic Nylon Brush Jet Nozzle materials will not handle high heat Use Vinyl Synthetic Cotton Medium High Clothes Steamer Cotton nylon brush with soft pressure for larger Cover Cotton Towel stains and jet tip for small stains Blot with cotton towel Use clothes steamer with cotton cloth to go over all surfaces to deoterize Test a small area first Steam over stained Clothes Steamer Cotton area and then blot with cotton towel Use Leather Low Cover Cotton Towel clothes steamer with cotton cloth to go over all surfaces to deoterize UPHOLSTERY KILL BEDBUGS DUST MITES AND ALLERGENS Vinyl Synthetic Cotton Medium High Jet Nozzle Clothes Steamer Cotton Cover Test a small area first Some synthetic materials will not handle high heat Use clothes steamer with cotton cover and slowley pass over area to allow heat to kill pests Use jet nozzle for cracks and corners GO TO VAPAMORE COM TO SEE THE MR 1000 FORZA INSTRUCTIONAL VIDEO APPLICATION STEAM VOLUME ATTACHMENT TECHNIQUE WINDOW BLINDS Nylon Brush Jet Nozzle Dust area first Thin plastic blinds may not be able to handle heat from the steam
24. y Be sure to include in the box all your contact information including name phone number e mail address and shipping address along with a prepaid return ship tag from UPS or Fed Ex Vapamore does not ship and will not accept items sent via USPS Contact Vapamore at 480 951 8900 or e mail customersupport vapamore com for making arrangements to return items for repair or service Vapamore is not responsible for any shipping cost to or from our facility Vapamore tel 480 951 8900 fax 480 951 8902 pan www vapamore com US
25. y result in damage to the steam cleaner and possible injury to the user The correct voltage is listed on the label 17 Drain water tank prior to shipping transporting 18 A hazard may occur if the steam cleaner runs over the power supply cord 19 Accessories become hot during use allow them to cool down before handling 20 Never immerse the steam cleaner in water or other liquids 21 Keep the steam cleaner away from rain and moisture The steam cleaner is not suitable for outdoor use around water 22 Only use the steam cleaner in containers pools that are not filled with water or other liquids 23 Do not operate the steam cleaner without water in the tank Always top off with water when needed 24 Only use distiled water Using hard water can cause calcium or mineral build up and void the warranty 25 Never use additives such as perfumes stain removers or other chemicals in the water tank as they will void the warranty cause permanent damage and be dangerous 26 Always remove the main plug from the socket and allow the steam cleaner to cool down completely before storage 27 Do not overfill the tank Do not exceed the maximum filling level Please use the funnel included 28 Make sure the water tank cap is fully secured before use 29 Empty the water tank if stored See cleaning and storage 30 Do not touch any hot areas on the steam cleaner It is normal for the steam cleaner to heat up during op
Download Pdf Manuals
Related Search