Pro2-EOS- 说明书-2014-04-03
Contents
1. Log files can be directly read on a PC computer or Mac OSX system like a USB flash driver No software is needed Packing list Confirm that the package contains the following items Pro2 Eos GPS receiver e Connecting cable e USB cable e Manual e Storage bag e Camera strap adapter Golmsta MN Geotag your world Parts of the Pro2 EOS O Power switch ENTER button MENU button LED USB terminal 000600 Mounting foot Charging 1 Use the supplied USB cable to connect the device to a computer car charger or AC adaptor with a USB port The receiver can be charged using any USB port that provides the standard 5 volts 2 The device should be fully charged in about two and a half hours The indicator on the LCD screen will show the internal battery s current level of charge e In the custom setting the current voltage of battery can be checked anytime e When the internal battery is close to being exhausted the battery indicator will flash Turn the receiver on and off Press the power switch for 2 seconds to turn the receiver on Press the power switch for 3 seconds and confirm with the ENTER button to turn the receiver off Button Definition MENU button gt Change 8 Select function ENTER button gt Confirm select amp enter the current setting option Golmeta LCD display introduction Main Display 1 Turn on the receiver The LCD shows the firmware version first then the longitude 2 There are2. Information in this document is subject to change without notice Solmeta Technology reserves the right to change or improve their products and to make changes in the content without obligation to notify any person or organization of such changes or improvements 20 Golmeta Geotag your world Mounting illustration Golmeta HN Contact Service If you have any questions or need help with our products please do not hesitate to get in touch with our Technical Service You can reach our service people by phone under the telephone number indicated below from Monday through Friday from 9 00 am to 5 00 pm Independently of these service times you can also get in touch by e mail Solmeta Technology Tel 86 755 26969187 E mail info solmeta com pol solmeta com www solmeta com 22 Golmeta Geotag your world Shenzhen Solmeta Technology Company Add Room 327 Building 5 Zhong Xing Industrial Town Chuang Ye Road Nan Shan district Shenzhen 518054 China Tel 86 755 26969187 Fax 86 755 26969187 E Mail info solmeta com Web www solmeta com Print in China
3. becomes invalid The LOC symbol is displayed on the LCD to indicate that the current GPS position is the recorded Lock data 10 Golmeta Geotag your world Logging the route traveled The receiver can be used as a data logger which records the GPS position at regular intervals in its internal memory The log function is default As long as the receiver s GPS signal has been acquired the daily logs are automatically recorded in the log file even if the receiver is not connected to the camera Interval time setting Location information is recorded at regular intervals along the route traveled with the receiver Daily logs are saved in the flash memory The interval time can be set via the custom settings as described below 1 Turn on the receiver and press the MENU button to access the custom settings The LCD will show lt SET gt flashing on the LCD screen LT J the icon lt SET gt is flashing in the LCD 2 Press the ENTER button to go into the custom settings Then continue pressing the MENU button untilthe LCD display is shown as The number in the LCD shows the available memory When the available memory is displayed press the ENTER button to access the interval time settings Continue to press the MENU button to reach the desired interval time then press the ENTER button to confirm the selection The interval time can be setat 1 5 10 15 and 30 seconds 1 2 5 minutes or DISABLE 10 seconds
4. in areas subject to extreme heat Failure to observe this precaution could result in damage to the casing or internal circuitry and could potentially cause a fire Keep out of reach of children This product contains small or potentially dangerous parts that could prove hazardous to children Failure to observe this precaution could result in injury Golmeta Introduction Thank you for your purchase of a Solmeta Pro2 Eos The Pro2 Eos GPS Receiver is a newly developed unit specially designed for photographers who use Cannon EOS System and enjoy geotagging photos In addition it can easily be used independently as a GPS track logger to provide real time geographic coordinates logging Be sure to read this manual thoroughly before use Features e LCD with backlight displays all major GPS information in real time e Record location information latitude longitude altitude and shooting time UTC directly to your photo file s metadata e 3 axis electronic compass provides accurate shooting direction Not only the direction data can be viewed in LCD but it also be added in the image file e Use internal rechargeable Li ion battery as its power source e A Lock function can be enabled allowing the receiver to reuse the last known position for subsequent images if the GPS signal is lost e Logging Routes traveled with the receiver Can used as a GPS logger A large 2GB capacity memory can record up to 4 900 000 positions
5. 9 display options which will be displayed on the LCD This is the first level of options Press the MENU button to access and scroll through the LCD display selections 3 The number displayed in the top left corner indicates signal conditions 03 means that the unit acquires two satellites 09 means that the unit acquires three satellites lt LON gt Longitude W west E east lt LAT gt Latitude S south N north p m lt ALT gt Altitude the unit of meter or feet is available via setting 7 a M y Mm meter FT feet n g lt DIR gt Direction Magnetic north or true north is available via setting g nc MN MN Magnetic north TN True north a mun lt TIM gt Time UTC or local time is available via setting U UTC L IC 17371 E I WC I local time INCH I lt DAT gt Date time zone UTC date format can be set Cu iu I 09 ma lt SPE gt Move speed the unit of kM MIL or N is available via n KM setting KM Kilometer MIL mile N nautical mile lt GRA gt Electronic level The number at left is the unit s current pitch elevation data The number at right is the roll tilt data The level zero can be corrected via setting lt SET gt Custom setting In this display press ENTER button and CCT 7 the custom setting is entered The Pro2 EOS offers following16 custom Juin setting options Golmeta Custom setting instructions The receiver o
6. custom setting 8 or connecting camera as below Select lt GPS device settings gt One the EOS 1D X and other models that display the following screen set lt GPS device gt to lt Enable gt and then select GPS device settings gt Auto power off I min LOD brightness Auto Date Time zone OIII 12 13 30 Language English VF grid display Disable GPS device Set nas GPS device Enable F GPS device settings GPS device settings Enable the digital compass Select lt Digital compass gt and press lt gt 13 Goimcta HUM Geotag your world Using the compass Select lt Enable gt and press lt gt 14 Golmeta Geotag your world Compass calibration IMPORTANT Before using the receiver you must calibrate the compass Repeat this procedure each time you move the device and camera more than 100 miles or are using different cameras Also calibrate the compass if the direction shown as you shoot seems incorrect The compass calibration can be performed via Pro2 EOS receiver custom setting or via camera setting Calibrating the compass via Pro2 EOS receiver custom setting 1 Enable the compass calibration 1 With the data cable connected mount the receiver on the camera s hot shoe then turn the receiver and the camera on 2 Press the MENU button to access the Main Display setting lt SET gt flashing on the LCD LA pu 7 1 3 Press the MENU button repeatedly to access the Cust
7. e of damage caused by incorrect use poor maintenance or if persons not authorized by Solmeta Technology have carried out alterations or repairs e For the device to be used correctly the user should strictly adhere to all instructions included in the user guide and abstain from any actions or uses that are warned against in the user guide Precautions for use Do not drop The product may malfunction if subjected to strong shocks or vibration Keep dry This product is not waterproof and may malfunction if immersed in or is exposed to water Avoid sudden changes in temperature Sudden changes in temperature such as when entering or leaving a heated building on a cold day can cause condensation to form inside the device To prevent condensation place the device in a carrying case or plastic bag before exposing it to sudden changes in temperature Keep away from strong magnetic fields Do not use or store this device in the vicinity of equipment that generates strong electromagnetic radiation or magnetic fields Strong static charges or the magnetic fields produced by equipment such as radio transmitters could affect the product s internal circuitry In extremely rare instances a strong external static charge may cause the device to stop functioning If this occurs turn the camera off and disconnect and reconnect the Geotagger Pro Eos In the event of a continued malfunction contact your retailer or Solmeta authorized service representative
8. eotag your world GEOTAGGER Pro2 EOS User Manual V1 0 Solmeta Technology Co Ltd Copyright 2014 Solmeta Technology Co Ltd All Rights Reserved Golmcta HN Contents Safety TI OF aaa 1 DHE OGUICTIO y ee er ern reeresshriee 2 ias AE o ar rare anne 3 Turn the receiver on and DU a adas 3 LCD display introduction Seen nennen ed een 4 Custom setting IASTRUCIONS arranca iia anne 5 6 Recording GPS data ge ag Hd a een naeh ae 7 10 Logging the Route Traveled estra iS Er er Renee 11 Using the cCOoMpaSS ota 13 14 Compass calibrati M aqi nen AE AAE ra aaa 15 17 Magnetic declination adjUStMEent us a erneut 18 Specification a ada 19 Warranty ri eda A A o e ed RARA E ee 20 Mounting MMS Era O Da een a ne een ne aaa 21 COREACE SO VI ee se era 22 Golmcta ME Safety Information To prevent damage to this GPS unit or injury to you or others please read the following safety instructions before using Do not disassemble Touching the product s internal parts could result in injury In the event of malfunction the products should be repaired only by a qualified technician Any unauthorized disassembly or modification may void the unit s warranty Keep the GPS unit dry Do not immerse in or expose to water or handle with wet hands Exposing the GPS unit to water could result fire or electric shock Do not subject to high temperatures The GPS unit can be damaged by exposure to fire or high temperatures Do not leave the unit
9. ffers 13 second level custom settings options accessible from the Main Display item lt SET gt Press ENTER to access the custom settings then MENU repeatedly to view each of the following options Tips e When the unit is in custom setting menu press POWER switch can return to the display menuo SE il lt LED gt backlight setting ON OFF or DELAY Delay 1 2 3 4 or 5 minutes The default 1 En FM isi minut L pa is 1 minute Str lt LOCK gt Automatically use the last known position or not use LOCK use or UNLOCK do 2 Prk not use LOCK is the default lt Unit of altitude gt M meter or FT feet meter is the default lt UTC gt Time or Local time The UTC time is received from the GPS signal and cannot be adjusted The local time can be adjusted to meet the user s local time by changing the time zone U UTC or L Local time UTC is the default lt Date format gt YYYY MM DD DD MM YYYY or MM DD YYYY YYYY MM DD is the default SEF f 6 N M lt Unit of speed gt KM kilometer MIL mile or N nautical mile KM is the default u dl lt Logging interval set gt The number displayed shows the available memory Press the er 7 ENTER button to set the interval time The interval time can be set as 1 5 10 15 7 COT orci 30 seconds 1 2 5 10 20 or 30 minutes 10 sec is the default FAO OULU To disable the function press the MENU button until DISABLE is shown on the LCD Press ENTER to confirm
10. hat the receiver is searching for satellite signals After a few moments the GPS symbol will be steady indicating acquired GPS P 1 125 56 3200 OS EN 52 1 signals paja a SSS onesHorT I EI QQ en F aa 5 514 lt 1043 gt Canon EOS 650D main screen 7 Golmeta Recording GPS data geotagging lt B gt Wi l Sou OY msan estao OO ed Canon EOS 1D x back LCD screen 3 Viewing GPS information Check GPS information as follows when the receiver is connected to a camera that displays GPS device settings in the menu Select GPS device settings On the EOS 1D X and other models that display the following screen set GPS device to Enable and then select GPS device settings shee Auto power off I min LCD brightness Auto Date Time Zone 0141114 13 30 Language English VF grid display Disable z A GPS device settings GPS device GPS device settings GPS device settings Golmeta Geotag your world Recording GPS data geotagging Select GPS information display detailed GPS information is displayed GPS device settings GPS information display Auto time setting Disable Latitude Position update timing Longitude Digital compass Enable Elevation GPS information display Direction Calibrate digital compass UTC Satellite reception In this sample screenshot Direction NE 45 indicates that the camera was facing 45 northeast Nort 0 South 180 UTC C
11. isthe default Note Disabling the log function is also available in the interval time setting The positioning interval can also be set via the connecting camera Select lt GPS device settings gt One the EOS 1D X and other models that display the following screen set lt GPS device gt to lt Enable gt and then select GPS device settings 11 Golmeta Geotag your world Logging the route traveled 0 Auto power off I min LOD brightness Auto Date Time Zone 01 11 12 13 30 Language English GPS device settings VF grid display Disable GPS device settings GES Cevice ec GPS device settings Select lt Position update timing gt GPS device settings Auto time setting Disable Position update timing Digital compass Disable Select the time Position update timing Every sec Every 30s Every 55 Every min Every 10s Every 2m Every 15s Every Sm 12 Golmeta Geotag your world Using the compass The Pro2 EOS built in an electronic compass The direction is recorded in the EXIF metadata when you shoot The direction is also logged in the daily log file The direction can be viewed in the LCD as below gg_ s5 2305 In this sample LCD it indicates that the receiver was facing 230 5 southwest MN shown on the LCD indicates that direction is of Magnetic North standard If you don t need the direction data you could turn off the direction via Pro2 EOS custom setting refer to the
12. om Settings lt CAL gt E rm LU 4 Press the ENTER button again until the LCD shows the following screen i S bassasasJ 2 Perform the calibrating as described below 1 Hold the camera and the Pro2 EOS receiver in your hand rotate both devices slowly around the X axis Y axis and Z axis Do the rotation twice in each axis Try to do the rotation as a constant speed Each rotation takes about 5 10 seconds 2 After doing the rotation in each of the three axis press the ENTER button again to finish the calibration 15 Gol Compass calibration Calibrating the compass via camera setting 1 Select GPS device settings meta One the EOS 1D X and other models that display the following screen set GPS device to Enable and then select GPS device settings Auto power off 1 min LOD brightness Auto Date Time Zone 0111 12 13 30 Language English VF grid display Disable GPS device settings GPS device nable mama 2 al GPS device settings GPS device settings 2 Set Digital compass to Enable GPS device settings Digital compass Disable Jar 3 Select Calibrate digital compass press lt y gt to prepare for calibration Move the camera as shown on the next page 16 Golmeta Geotag your world Compass calibration Calibrate digital compass Cancel IMPORTANT When you finish performing the steps upon you must press the ENTER button on the Pro2 EOS recei
13. oordinated Universal Time is essentially the same as Greenwich Mean Time The icon lt g al gt indicates signal conditions When lt 3D gt is displayed elevation can also be recorded However elevation cannot be recorded when lt 2D gt is displayed Golmeta Geotag your world Recording GPS data geotagging 4 Taking photos and geotagging the images Take photos as you would normally The GPS data is recorded directly onto the photo s metadata EXIF as you shoot Since the receiver has a built in electronic compass the images can also be tagged with the shooting direction EOS 7D does not support tagging of the shooting direction Ifthe heading data is not accurate it will be necessary to perform a compass calibration Please refer to the calibration instructions 5 Geotagging information 100 0021 0 Direction s id A Latitude Longitude Elevation UTC Tips e If a photo is taken when the receiver is off or it has not yet obtained a GPS lock the image will be recorded normally but without any GPS data e If you take photos in situations where the GPS signal is lost after it was already acquired such as indoors under tree coverage or near tall buildings the lock function which is enabled by default will reuse the last known position for subsequent images Only when the receiver is kept on the Pro2 EOS able to provide the last known GPS information If you turn off the receiver the stored GPS data
14. ot start lt 1sec Reacquisition lt 1sect Supported cameras Without aid 3 0M 2D RMS postion DGPS WAAS EGNOS MSAS RTCM 2 5M Azimuth Range 0 359 Accuracy 2 Horizontal Accuracy 5 Tilt or roll 80 3 axis electronic compass Data format NMEA 0813 Geodesics WGS84 High accuracy time Shown on LCD as 0 1s The time is from GPS Accuracy lt 100ns Internal flash memory 2GB FAT16 size file system Battery 600mAh Li ion Operation Current lt 60mA Charging Current 300mA Operating temperature 10 C 50 C 2 F 122 F Dimensions L x W x H Approx 56 x 36x 19mm Approx 50g 1 8 oz Golmeta Geotag your world Warranty e Solmeta Technology Co Limited guarantees this product to be free from manufacturing defects and workmanship for a period of two years from the date of original purchase During the two year warranty period Solmeta Technology will repair or replace the product free of charge if defective Please keep your original invoice as proof of purchase e Customers are required to contact Solmeta Technology by e mail info solmeta com for trouble shooting issues before returning the product e Customers are responsible for shipping and insurance charges for returning the product to Solmeta Technology e Charges will be imposed for repairing the product if it is out of the warranty coverage period or if the warranty is invalid e The guarantee is not valid if there is evidenc
15. ver Once you press the ENTER button the camera displays the following screen which indicates the calibration completed Calibrate digital compass Digital compass calibration complete 17 Golmeta Geotag your world Magnetic declination adjustment If necessary the direction can also be magnetic declination adjusted This adjustment is sometimes required to compensate forthe difference between magnetic north and true north which can vary depending on one s geographic position Doing the magnetic declination adjustment Press the MENU button repeatedly to access the Custom Setting 10 lt DIR gt TN shown on the LCD indicates that the direction is of True North standard SET 3 ICi TM N la IIN Press the ENTER button twice to show the the LCD direction setting N Atthis time point the receiver to True North you should find True North from your location with the help of a map or an accurate magnetic compass Press the ENTER button again and turn the receiver until the LCD shows the following SET e PITA Th N LILILILI iy 0000 means that the magnetic declination is adjusted 18 Golmeta Geotag your world Specification EOS 1DX 5DMarkIII 7D 70D 700D 650D 100D please refer to our website to learn the latest compatible camera models MTK MT3329 GPS chipset 66 parallel searching 22 tracking channels Tracking sensitivity 165dBm Acquisition times Cold start lt 35sec H
16. your selection Golmeta HIM Custom setting instructions SET 4 8 di o NN lt Compass function on gt Set the compass function on or off GET 8 9 rR lt Compass calibration gt refer to page15 7 lt Direction preference gt Magnetic north standard or True North standard are available 10 355 wit options MN Magnetic North default TN True North Magnetic declination can l HIJ also be adjusted an lt Level zero correction gt mm lt Beep on gt Set the audible beep on or off 12 LEED Hit p p II 9 SEF A 13 LAT u lt Current battery voltage gt Golmeta Recording GPS data geotagging 1 Connectthe receiverto acompatible Camera 1 Turn off the camera 2 The receiver is equipped with a mount that fits the camera accessory shoe Slide the receiver onto the camera accessory shoe Then connect itto your camera s accessory port via the connecting cable Turn on the Pro2 EOS receiver and the camera Ifthe receiver is properly connected to the camera GPS signal status is also shown on the camera LCD panel or LCD monitor The GPS icon is only displayed when the receiver is communication with the camera Blinking GPS Signal not acquired Constant GPS Signal acquired 2 Acquire GPS signals To acquire GPS signals take the receiver and camera outdoors where the sky is unobstructed and hold it up At first you will see a flashing GPS symbol in the top left of the receiver s LCD indicating t
Download Pdf Manuals
Related Search