ECHO-IRLP Nano-Node SE USER`S MANUAL - Micro-Node
Contents
1. The DTMF Button toggles the radio DIMF Control option When it is Enabled Green the unit will accept radio DTMF commands When it is Disabled Red the unit will not accept radio DIMF commande The Reflector Button toggles the radio DIMF Reflector Access option When it is Enabled Green radio DTMF codes can be used to connect to a reflector When it is Disabled Red radio DTMF codes cannot be used to connect to a reflector The Auto_Ref Button toggles the Automatic Reflector Reconnect option When it is Enabled Green the unit will automatically reconnect to the programmed reflector after the programmed interval of inactivity has occurred Notes Programming the various operation values for these options is accomplished using the Set IRLP Screen These functions can also be programmed in the Set Decode Screen to be controlled by DTMF Codes Favorite Node Buttons FAV 01 05 ge cl Ep End Gall sable Cigale e E i The Nano Node can have up to 30 Favorite Nodes programmed into it The Favorite Nodes are arranged as six 6 banks of five 5 nodes each Clicking a Favorite Button will connect the unit to that Favorites Programmed Node 8 Nano Node SE User Manual Micro Node International These Favorites can also be called using DIMF Codes To allow favorites to be accessed using DIMF enter the DIMF Code to use in the DIMF Box of the Favorite in the Set Console Screen The label above each favor2. CC Dis ACTION SETTING DISCONNECT i WEB Softkey ul DELETE C Command DTMF Reg sing 5 DN Function Set Auto Ref Ena Node gt Menu A Menu CE TYPE TIME ACTION SETTING i Hode mo Fixed Function Ena Node Always EC Fixed Function Play ID DateTime Always Set Audio Fixed Auto Ref 9250 Always Fixed Command 3724 Always YES i Set Messages Fixed Command 3 H Con SetConsole Repeat Function Play Text 1 Msg I Idle Fixed Function Dis Hode Always YES e d Set Decode Allow Deny a The Set Schedule screen is used to program scheduled events to be run at specific times lt allows the Nano Node to perform up to 20 time scheduled events To enter an event click on the line in the lower window where the event is to be entered The line will become highlighted and the upper window will show the event information for that line To Activate the line in the ENABLE section select the Enable Status for the entry When Ena is selected the event is Enabled When Dis is selected the event is Disabled When Sch A is selected the event will only be Active if the SCH A option is enabled The SCH A option is controlled by the button on the console or by a programmed DTMF Command When Sch B is selected the event will only be Active if the SCH B option is enabled The SCH B option is controlled by the button on the console or by a programmed DTMF Command In the TYPE
3. Map SAVE AN TEXT MESSAGE TOKENS DATE TIME COND TEMP HUMD PRES WIND WEB Softkey D0 NOT USE TOKENS When Building IRLP Connect Disconnect Announcements Hode Info set Audio Upload Nodes Connect amp Disconnect Announcements Set Schedules Select Type Create And Select Which Message Type To Use For IRLF Announcements MSG 1 Will Be Used For Connect and MSG 2 Will Be Used For Disconnect SEU ep Text Voice SS eS SS o C Click Frewiew To Hear What Will Be Uploaded To The Server Set C i CURRENT Click Upload To Transfer The Files To The IRLP Serwer Mor P E a SOES Click Current To Hear Your Current IRLP Serwer Announcements Set Decode Allow Deny The Set Messages screen is used to build the messages used on the Micro Node and to upload custom IRLP connect amp disconnect announcements to the IRLP server Note The Node Should Be Disconnect Before Performing Any Message Operations Since Some Of The Message Operations Will Not Start Or Perform Properly If The Node Is Connected The Nano Node has a total of twelve 12 messages that can be played on the node either by using a DIMF code or the Auto Scheduler There are eight 8 messages that are Text to Speech and four 4 Voice messages that are recorded wave files To hear a Text Message select the message number and click the PLAY button To enter a Text Message select the text message number to edit and type the text in the text wi
4. Select the EchLink DThdF PretixTo Use This Will Be The DTMF Digit That Must Preceed An EchoLink Node Number To Call An EchoLink Hode The DTMF Prefix can be set to one of the following ABC To Call an EchoLink node use the selected Prefix Code followed by the EchoLink Node Number Call EchoLink Node Examples To call EchoLink node 123456 with the Prefix Code set to use 123456 To Call EchoLink node 123456 with the Prefix Code set to B use B123456 Notes To change the Prefix Code after EcholRLP is already installed requires a reinstall of EcholRLP with the new Prefix Code It is recommended that you use a Prefix Digit that is not used as the first digit of any other DTMF commands being used on the system This will prevent other commands from conflicting with calls to EchoLink nodes After a Prefix Code is changed any Favorite Code that is set up to call an EchoLink node will need to be changed to reflect the new Prefix Code au Nano Node SE User Manual Micro Node International 11 0 SETUP VPN CLIENT IRLP 3184 ECHO 304744 Ge IF Ve Console Map WEB Softkey K6IB SETUP VPM CLIENT set IRL P SetECHO To Upload A Configuration Or Micro Mode YPM Account File To The YPN Configuration y Folder Click BROWSE to Select The File And Then UPLOAD To Upload The File To Remove All The Files In The YPM Configuration Folder Click DELETE ALL System Setup Up VPN Operation The Se
5. Micro Node Intemational 2014 AR Rights Reserved RER ER ER a AA E es ee La ADMIN is the Nano Node custom web browser based package that is used to program and operate the Nano Node To access ADMIN point a JavaScript Enabled browser to the URL your ip address admin This will bring up the ADMIN Opening Screen It displays the units assigned Callsign and IRLP Node Number It also displays the units EchoLink Number if EcholIRLP has been activated on the unit The buttons in the left panel of the Admin screen are used to select the various Admin setup and control sections The and Menu B buttons select the two available menu control banks IMPORTANT NOTE The ADMIN program can be Password Protected This protection is setup through the System Screen It is Strongly Recommended that Password Protection be used if the unit s HTTP Server Port is exposed to the Wide Area Network Internet Note ADMIN can be brought up in a browser Pop Up window with minimum space used for browser controls To activate this Pop Up window Double Click on the Picture Of The World on the opening screen eg Nano Node SE User Manual Micro Node International 2 0 CONSOLE IRLP 3724 E ECHO 360535 Se l NODE IDLE ES Een Last IN DO E 9832 WCIP ID Status Disabled Last OUT 0225P 9500 Reflector Codec Last CW DCH l 7915 AJAY 5 Port Interval se TimeOut Enabled Valid IB 87 214 190 110 obtained from The reflector IP i
6. DMZ feature you can put the IP address of the Nano Node into the DMZ and all ports will be forwarded to the node 3 Nano Node SE User Manual Micro Node International 20 0 EXTERNAL CONNECTIONS Pin 1 Transmit Audio to transmitter AC Coupled Pin 2 Transmit PTT Output Active Low Open Collector 200ma max Pin 3 ID PTT Output Active Low Open Collector 200ma max Pin 4 FAN Output Active Low Open Collector 200ma max Pin 5 AUX Output Active Low Open Collector 200ma max Pin 6 Power Signal Ground Pin 7 CTCSS Input Active HI or LO Programmable 14Vdc max Pin 8 Receive Audio from receiver AC Coupled Pin 9 Auxiliary Power Input 7 18Vdc 400ma Min 3 Nano Node SE User Manual Micro Node International CAT 5 Network Ethernet Connection A Nano Node SE User Manual Micro Node International MICRO NODE INTERNATIONAL http micro node com 702 528 4700 Model MN 6000 Serial No 23000309 Main Power Connection 7 18VDC 400ma LAr a JE EE Bb M Internal Radio Antenna Connection 3 Nano Node SE User Manual Micro Node International ECHO IRLP NANO NODE SE MICRO NODE INTERNATIONAL E mail support micro node com Phone Support 702 528 4700 Website www micro node com 2015 by Micro Node International
7. IPA for the node then Civitan OUCH to save the new value or to abort DNS IPA K Touch to enter the NETWORK DNS IPA for the node then eebe Ouch to save the new value or to abort Aa Nano Node SE User Manual Micro Node International Touch to ENABLE or DISABLE VPN functionality that has been previously configured in SECTION 11 0 SETUP VPN CLIENT Touch if the network preset selected is WiFi 1 or WiFi 2 to set the WPA or WPA2 PASSCODE for the router or hotspot you are connecting to Touch if the network preset selected is WiFi 1 or WiFi 2 to set the SSID name for the router or hotspot you are connecting to arr Nano Node SE User Manual Micro Node International 19 0 FORWARDING IRLP PORTS THROUGH A ROUTER As with any other IRLP node if your Nano Node is behind a router you have to forward some TCP and UDP ports to the node or put the node into the DMZ of the router The IP address of your node should have been set to a local static address in section 18 SYSTEM NETWORK above You will need to forward the following ports through your router to the IP address of the node 15425 15427 TCP 2074 to 2093 UDP If you want to be able to access the remote web administrator console from outside your local network you will also need to forward 80 TCP If you are using Echolink EchoIRLP on the embedded node you will also need to forward 9198 and 5199 UDP Alternately if your router has a
8. TIME section select whether the event should occur at a Fixed Time or Repeat at a Time Interval Then use the drop down boxes to select the Time or Repeat Interval for the event Repeat Intervals are locked to standard clock interval times For example if 15 min were selected the event would occur every hour at 00 15 30 and 45 lf 4 Hrs were selected the event would occur on the hour at 00 00 04 00 08 00 12 00 16 00 and 20 00 In the DAYS OF WEEK section check the boxes for the days of the week that the event should occur In the WHEN section select when the event is to occur Selecting Always will always make the event occur Selecting If Con will make the event occur only if the node is Connected at WD Nano Node SE User Manual Micro Node International the event time Selecting if Idle will make the event occur only if the node is Idle or Disabled at the event time KGIB AUTO SCHEDULER deed ENABLE TYPE TIME DAYS OF WEEK WIEN ECHO 304744 ot oe M oo D GG Always SU MO TU WE TH FR SA u Sch e H Conn Console Repeat C SchB C Repe vw hw vy Mw kk C If idle Map i C Dis ACTION SETTING DISCONNECT WEB Softkey url DELETE C Command DTMF Reg ame 5 Function DN GG Function C Set Auto Ref Ena Node Node Menu A Menu WE EHA TYPE TIME DAYS ACTIOH SETTIHG Hode Info de infa 1 ENA Fixed 08 00 SMIWIFS Function Ena Node Tea 2 ENA Fixed 08 00 S5MTWTFS Function Play ID Date Time Always as J
9. and a Password assigned for that callsign Only EchoLink Callsigns registered as Link L or Repeater R may be used for EcholRLP operation To Install EchoIRLP the following information Must Be Entered 1 The Registered EchoLink Call including the L or R 2 The Password Assigned to that Callsign 3 The Location Of The Node example Fremont Ca 4 The E Mail address where EchoLink can reach the node owner The EchoLink Node Number is optional and is only used by the Nano Node to display on various screens The Connect Banner is also Optional Once the information has been entered click the Button This will bring up a confirmation screen to verify the information To install EcholIRLP with the information shown on the confirmation screen click the Button To change any of the settings on a currently installed EcholIRLP system enter the new settings and repeat the Install process To Remove the EcholRLP program click the Button Note Installing or Removing EcholRLP will cause a reboot of Linux Nano Node SE User Manual Micro Node International To allow system flexibility the EcholIRLP operation can be setup to use one of five DTMF Prefix Codes The Prefix Code is the DTMF digit that needs to proceed an EchoLink node number to indicate that it is a call to an EchoLink node This code is set using the EchoLink DTMF Prefix Dropdown box shown below when setting up an EcholRLP installation EchoLink OTMF PreFix e
10. become highlighted Click the highlighted caption to toggle the Time Out Timer operation If the node has EcholRLP Installed then Echolink operation can be Enabled or Disabled by moving the mouse cursor over the EchoLink caption The caption will become highlighted Click the highlighted caption to Toggle the EchoLink Operation Mode This only works if the unit is not connected to another node we Nano Node SE User Manual Micro Node International Standard IRLP Functions End Gall Get Log Disable Ente Clicking the Button will Enable IRLP operation Clicking the Button will Disable IRLP operation Clicking the Button will display the latest entries in the IRLP Log File in the display window Clicking the End Call Button will Disconnect the current connection Send DTMF Commands amp Regenerated Tones Ze Mf aere H was uhode Ref West Ref I Fav o1 o5 I AH aw Birenector i autorer J sch a Us WM DTMF Out cea CR End Gall Enable To Send a DTMF Command enter the DTMF Text Code in the Yellow DTMF Text Box above the DTMF Buttons Valid characters are 012345678 9ABCD SP To Send the DTMF Code as a Command to the Nano Node unit Click the DTMF Out Button To Regenerate the DTMF Code as Audio Tones out of the Nano Node unit Click the DTMF Reg Button O Nano Node SE User Manual Micro Node International Special Option Functions az 5 Ge Reflector Sch Ay KUE CS Cp End all able Ename
11. the shortest distance from the click point to the current pointer location will be shown in a window at the upper right corner of the map Note 362 mi 592 km The Map will only show locations of IRLP nodes that have provided Lat Long information to IRLP net The Map Will Not Show Locations For EchoLink Connections Sr Nano Node SE User Manual Micro Node International GPS SAT TRACKING Optional Feature K6IB IRLP 3184 GPS Locked BERN S Lat 37 57704 Lon 122 03997 speed 0 mph Direction 41 Altitude 46 Console CH i I SE eet Set Messages Set Console RES Groups Found GPRMC GPGGA GPGSA GPGSY z Allow SE Deny Groups Missing The GPS Satellite Tracking Screen displays information and satellite tracking from a GPS receiver connected to the unit The GPS receiver status location speed direction and altitude are shown in the upper left of the display The information on each satellite in view is show in the lower left of the display The right side of the display shows the overhead position of GPS satellites in view to the receiver Satellites that are Locked are shown in Green Satellites with signals that are being received but are not Locked are shown in Yellow Satellites with signals that are not being received are shown in Red The GPS sentence groups that are required by the display are shown in the area at the bottom of the display If any groups are shown as missing the display will no
12. A will be your router s IPA Notes Starting and Stopping VPN Should ALWAYS Be Done With The Browser Using The Units LAN IPA Otherwise the connected shutdown status screens cannot be displayed since the WAN IPA will change during the operation The Up or Down state of VPN operation is retained over both Power Down and Linux Reboot operations If VPN was active when the unit was shutdown it will start up using VPN me Nano Node SE User Manual Micro Node International 12 0 SYSTEM KTIZA tee SET TIMEZONE Puen tne cite PY d B FCI LT 2 HE Loce WEE EE den n DE GT VT IEN V m PAP The System Screen is used to setup various Linux operations Nano Node System settings and to execute Set Time Zone To set the units Time Zone click the SET TIME ZONE Button When the Time Zone screen appears select the Time Zone City from the dropdown text list and click SET ZONE Restarting IRLP To Restart the IRLP Program rc irlp click the Button This will bring up a Wait Screen while the program restarts Do Not Click Any Browser Buttons while the Wait Screen is being displayed Wait until the Finished Screen is displayed Before Proceeding With Any Operation Enable SSH To Enable or Disable the Linux SSH Server use the DISABLE ENABLE SSH Button When the button is Green SSH is Enabled and clicking it will Disable SSH When the button is Red SSH is Disabled and clicking it will Enable SSH Set Password To
13. CM If the uploaded wave file is not in this format the unit will attempt to convert it The unit Can Not convert files that are in a compressed MPEG format due to licensing restrictions Pa Nano Node SE User Manual Micro Node International ECHO Enter The Text For o g TEXT MSG 1 7 Console is TIME and the current temperature is TEMP Map E TEST MESSAGE TOKENS DATE TIME COHD TEMP HUMO PRES IND WEB Softkey DO NOT USE TOKENS When Building IRLP Connect amp Disconnect Announcements Menu A Menu B t Hode Info PLA Voice Msg 4 par RECORD UPLOA set Audio D Upload Nodes Connect amp Disconnect Announcements Select Type Create And Select Which Message Type To Use For IRLP Announcements Text Voice MSS 1 Be Used For Connect and MSG 2 Will Be Used For Disconnect Click Previews To Hear What wll Be Uploaded To The Serwer Se i CURRENT Click Upload To Transfer The Files To The IRLP Server EL Onsale Click Current To Hear Your Current IRLF Server Announcements set Decode Allow Deny The IRLP system allows custom Connect amp Disconnect announcements to be stored on their server and which are played on the Remote Node when your node connects and disconnects To create custom Connect amp Disconnect announcements for your node decide if you want to use Text or Voice type messages for the announcements Then using that type of message temporarily create the connect ann
14. Code To ENABLE EchoLink Operation EchoLink Only For Nodes With EcholRLP Setup Menu A menu H Disable Enter The DIME Code Te DISABLE Echotank Operation EchoLink Only For Nodes Wah EcholRLP Setup Set Console Speak Node Enier The DTMF Code To Soeak Mode Sisius Status speak Voice ID Enter The DTMF Code Ta Speak A Voice ID speak Current ner T AF Code T sak C amp Time Set Schedules Haje A Time Enier The DTMF Code To Soest Curent Date 2 Time The Decode Screen sets up the DTMF Codes to be used to execute over 30 Built In Nano Node functions Each Function has a text box associated with it To Activate a function simply enter the DTMF Code to use for that Function in its text box The DTMF Code Digits can be 012345678 9ABCD Function Sections that show an asterisk will require additional values to be set before that function will work These values are set using the Set IRLP Screen Note Be sure to click the Submit button after Making Changes O Nano Node SE User Manual Micro Node International 6 0 SET ALLOW DENY SETUP NODES TO ALLOW OR DENY ACCESS GC WA Ki Check Box To Deny Connections From ALL Ecnolink Nodes lf Checked Oniy Deny ALL EchoLink Gaonnectons From EchoLink Modes Lied In Abow EchoLlink Wil Be Allowed Check Box To Deny Connections From Echolmk PO USERS lf Checked Only Echolink LINK amp REPEATER Connections Wil Be Allowed To ADD A eg Enter The Mode In The Bottom NODE Window The
15. KTIZA IRLP 3724 ECHO 360535 Console Wyoming Caper a Choerge EH Denver e Utilities Menu A Menu ke Set Console Set Decode Allow Deny Set Messages set Schedules K C RLP 9050 Reflector Fast Coast Reflector MI USA _ North Dakota Minnesota 4 e o Bismarck LIES K8 28 Di gf 4 Wisconsin ec Site Falls Michigan how a Miwaukeod es Mine Dita Nebraska SEA WI Omaa t ino es K et Und Indiana Missouri Kansas Wichita E kee Le SU Ke Alabama Georgia Ai M e lt Louisiana 8 g r ah p ii The Map Screen displays the Local location and the location of any connected node The Local location is shown with a Red Marker This location is taken from the Lat Lon values programmed in Set Console When the unit is connected to another node that node s location will be displayed with a Green Marker The Distance and Bearing from the Local location to the connected node s location is also displayed in the area under the map Clicking the Center buttons or clicking a map Node Balloon will center the map on the selected item The Zoom Level can be changed using either the Zoom buttons or the Mouse Roller Wheel Moving the mouse over the map will show the Latitude and Longitude of the pointers location in a window at the upper left corner of the map Right Click the mouse and the map will change to Measure Mode picture on right As the pointer is moved
16. N 2 ENA Fixed O85 SMTWIFS AutaRef 9250 Always 4 SCH Fixed 10 30 MTWTF Command 3724 Always YES Set Messages D SCHA Fixed 11 00 MTWTF Command 735 if Con Set Console _ SEE T 6h SCHEB Repeat por SMMATFS Function Play Text 1 Msg if Idle T ENA Fixed 23 45 SMTMVVTFS Function Dis Node Always YES e E Set Decode Allow Deny 2 In the ACTION section select the type of action the event is to perform Different SETTING sections will appear depending on the Action selected To set the event to send a DIMF Command select Command and then enter the Command DTMF Digits in the SETTING text box ACTION SETTING CG Command r DTMF Reg Command OTMF Digits Function e Set Auto Ref 3724 To set the event to send Regenerated DTMF Tones select DTMF Reg and then enter the Regen DTMF Digits in the SETTING text box ACTION SETTING fc Command ce DTMF Reg Regen DTMF Digits Function e Set Auto Ref 123 To set the event to perform a specific function select Function and then select the Function to perform from the SETTINGS drop down box A TIOM SETTING Command C DTMF Reg Select Function e Function Set Auto Ref eave To set the event to change which reflector that Auto Reflector Reconnect will use select Set Auto Ref and then enter the Reflector Number in the SETTING text box ACTION SETTING C Command DTMF Reg Reflector Number Function Set Auto Ref 9250 20 Nano Node SE User Manual M
17. ONFIGURATION CAN RESULT IN TOTAL FAILURE OF THE UNITS YORK OH VPN CONFIGURATION FOLDER client conf KIZA SETUP VPN CLIENT Console Map Utilities Menu A Menu B Sel IRLP To Upload A Configuration Or Micro Node YPN Account File To The VPN Configuration Folder Click BROWSE to Select The File And Then UPLOAD To Upload The File Set VPN To Remove All The Files In The VPN Configuration Folder Click DELETE ALL Set ECHO Choose File No file chosen Starting VPN To Start VPN operation click the the button on the Set VPN Screen This will bring up a Warning box To switch to VPN operation click OK in the Warning box At this point an Establishing VPN Connection Screen will appear Wait for the Connection Response Screen to be displayed which can take up to a minute If the connection was established the Connection Response Screen will indicate VPN UP The unit is now operating over the VPN Tunnel and its WAN IPA will be the VPN Servers IPA Stopping VPN Start Stop FIM Upload To Stop VPN operation click the the button on the Set VPN Screen This will bring up a Warning box To switch to Normal operation click OK in the Warning box At this point a Shutting Down VPN Connection Screen will appear Wait for the Connection Response Screen to be displayed which can take up to a minute If the connection was closed the Connection Response Screen will indicate VPN DOWN The unit is now operating Normally and its WAN IP
18. USER S MANUAL World s Smallest Plug amp Play IRLP EchoLink Embedded Solutions Micro Node International Inc Henderson Nevada Table of Contents 1 0 WEB BROWSER ADMINISTRATOR CONSOLE s sesessesesessesecsecscsesececesseseoececsesecececsesececsssesecesessesesscsesesesecseseseo 4 20 CONSOLE E 5 Outputs Last Reconnect Connect Timer Echofink 000000000 000 KR PP KRKA P OPORA POKR Ann 6 EE 7 Send DTMF Commands amp Regenerated TONES ssscccccssssseccnsnseeeccsaeseecesccsuseessssuseeessaeseesssauaseesssauusecssssuensessssauasess 7 Specidl Option FUNCTIONS vsncvacaierseserisorcticnansnsarzqceadecatensieredcaud ourbeeaisairseatunaireneavaianervantontbeedicarseindsyensisteddediientnseieusoredsantes 8 Favore NE POTON pa O A O E E TE EO E ce adons 8 Peca FNT TOn OOS ae E TAE es een E E T E E 9 Running SUE ee ee 9 FOF OIE aE E E EE 10 s0 E 11 GPS SAT TRACKING Optional Feoturel use 12 AO SET CONSOLE ice core sercacscucrces E E T ONE E O O ONTO TO 13 50 OFT DECODE eege 14 60 SEPALLOW DENY censere e a E E E 15 Z SEW IVES AGES ceia E E N T EEE A EOE O EE O OOOO 16 8 0 SET CHEDULES eege 19 SO za p o 2 P n O eo E E A E E E ENE 22 10 0 GEIER 23 11 0 SETUP VPN Be hy p o M S S O O K M E EE N 25 setup UD VPNODSTAUO serrar iiiar E EAEE O OREI EE E TEET O send tnnextietecedtnateeennentenet 25 SOIT V N n E E E E EEE E E E EEE l 26 LOP EE 26 12 0 SVS TE BEE 27 E EE EE 27 Pe SUNN IMEP so seaagam added etenea ae ned
19. alo oso asie voni ci E E dan9c s n 27 ED z PRA E O P T VO O O O O O 27 EE 28 13 0 NODE MONITOR wicsecaeiee cars crcsancacesaairwsesaeveaansceuanacscanesaiavaevessoaresaus waaenansvwoasaeedaeagassscueesneiwuxsoessensuccscaueesiaeseess 29 14 0 LCD TOUCH SCREEN ADMINISTRATOR CONSOLE sscsscsscssccsccsccsccsccsccsccsccsscnccescnccsscscessoscossoscoscossones 30 Ee 31 ICAI 9 0 6 N a E 32 PAV OV ICES MENU E 33 Wiele ee E 33 EMC E 33 15 0 RADIO MENU ee 34 Ee 34 Set Internal Radio Receive Ereguency 00 P 01 nRR PPP RR PEPE ERA RSP PPR R RAS EPER RKK RSS APE KR RSS PRO KR Ran 35 Set Internal Radio TransmieFIeGUSNCY E 35 Set Internal Radio CTCSS Frequency an nn e RR tarioak ekart RR APP PEK TANEK N ENKEN NEERA NEDENE EEATT ERNES 36 E Nano Node SE User Manual Micro Node International Sel Internal Radio squelch EE 36 Set Emna Rado CONN DO E 37 16 0 PUDIO gl UE 38 EE EE 38 Send AudoCahbraon E 38 17 0 SS 2 RA LEE 39 EE EE 39 kJ EVA 108 al E EEN 39 18 0 SYSTEM NETWORK eege 41 19 0 FORWARDING IRLP PORTS THROUGH A ROUTER ssscccsscccsscccscccescccesccescecescccesccesescesecsscsesescsecoesees 45 20 0 EXTERNAL CONNECTION S eege eege 46 wes Nano Node SE User Manual Micro Node International 1 0 WEB BROWSER ADMINISTRATOR CONSOLE KTIZA IRLP 3724 ih Vea ECHO 360535 kee Nano Node Liles EC HO Console i Software Version 1 012 Serial Number 22000104 K7IZA IRLP 3724 ECHO 360535
20. and control options follows Keypad Menu D Touch to open the DTMF keypad enter the 4 or 5 digit IRLP ECHOLINK S node number you would like connected then touch the button Touch the button if you want the entered digits to be sent over the air for controlling radios on the other end of the connection E Nano Node SE User Manual Micro Node International Favorites Menu Touch to open the FAVORITES keypad The Nano Node can have up to 30 Favorite Nodes programmed into it The Favorite Nodes are arranged as six 6 banks of five 5 nodes each Clicking a Favorite Button will connect the unit to that Favorite s Programmed Node The Button is used to step between the six Favorite Banks IRLP FAUDRITES R E E EB ge RS B 2 uNode Het WinSustem e r 1 Brent NN Hans NN E CANCEL Operator Menu a Touch to open the OPERATOR keypad IRLP and ECHOLINK system i 4 operation can be enabled or disabled by touching and toggling their individual buttons This only works if the unit is not connected to another node Operation of the Fan and Aux outputs located on the ext radio DB9 connector can be controlled by touching and toggling their individual buttons IRLP CONTROL End Call Touch to Disconnect the current connection om Nano Node SE User Manual Micro Node International 15 0 RADIO MENU INTERNAL The RADIO Screen is used for configuring the internal 430 450Mhz radio parameters and select
21. en the unit is using a VPN Connection The R indicator lights Green when the console is receiving a new update The T indicator lights Yellow when the console is Transmitting a Command Flip Frame Rmt Call 1 134 124 138 r The bottom right section of the console contains a Flip Frame This frame can be set to display several items To change which Flip Frame is in view click the Button TIME CLOCK FRAME The Time Clock Frame displays the current time in both UTC and the Local computer time Clicking on LOCAL in the time display can change the display format of the Local Time This time is derived from the local computer s clock and not the Nano Node REMOTE ADMIN FRAME The Remote Admin Frame displays controls for Remote Admin operation The Nano Node IRLP system allows for a Remote Call to a Nano Node This allows a remote computer running the SpeakFreely program to communicate over the Nano Node It Does Not Allow A Connection with Any Other IRLP Node To make a Remote Call to your node enter the IP Address of the computer running the ADMIN program in the Blue Remote Call Text Box This Must Be An IP Address and Not A DNS Name Select the Codec Type to use ADPCM or GSM Click the Rmt Call Button This will connect the computer running ADMIN to the Nano Node You can now use the SpeakFreely program to Talk and Listen over the node 10 Nano Node SE User Manual Micro Node International 3 0 MAP
22. icro Node International KGIB AUTO SCHEDULER pln neska ENABLE TYPE TIME DAYS OF WEEK WIEN ECHO 304744 GG Ena o Fi jos gt oo GG Always D EL SU MO TU WE TH FR SA u CC Sch e H Conn Console Repeat C SchB C Repe vw Mw vy Mw kk e if idle Map i C Dis ACTION SETTING DISCONNECT WEB Softkey OI UP DELETE C Command DTMF Reg anne 5 Function SCH DN GG Function C Set Auto Ref Ena Node Node Menu A Menu E E EHA TYPE ACTIOH SETTIHG d 1 ENA Fixed Function Ena Hode Always GN Hode Info 2 ENA Fixed i Function Play ID Date Time Always Si 3 ENA Fixed S Auto Ref 92750 Always m 4 SCHA Fixed Command 3724 Always YES Set Messages 5 SCHA Fixed Command 73 if Con i 6h SCHE Repeat Function Play Text 1 Msg if Idle Set Console T ENA Fixed S Function Dis Node Always YES e k Set Decode Allow Deny 2 An event can be set to perform a Node Disconnect before it executes the event action To do this check the box in the DISCONNECT FIRST section In the case where two or more events are scheduled to occur at the same time the events will occur in the order they appear in the list To change the order of events in the list select a line and then use the the or button to move that line up or down in the list To remove an event select the event line and click the DELETE button Note If A Line Is Missing Event Information Needed To Make It Occur Such As No Day Of Week se
23. ing whether the node will use the internal or external radio for node operation A detailed description of these parameters and their functions plus other command control options follows Select Radio Interface i Touch to open the SELECT RADIO dialog box Select the INTERNAL button to configure the node to use the internal radio select the EXTERNAL button to configure the node to use the external radio repeater wired to the DB9 external radio connector SELECT RADIO INTERNAL a Nano Node SE User Manual Micro Node International Set Internal Radio Receive Frequency fetes Touch to open the radio RECEIVE FREQENCY dialog box Enter the W desired receive frequency between 430 450Mhz then touch to save the new value or to abort A decimal point is required after the megahertz portion of the frequency Set Internal Radio Transmit Frequency meal Touch to open the radio TRANSMIT FRQUENCY dialog box Enter the desired transmit frequency between 430 450Mhz then touch the to save the new value or to abort A decimal point is required after the megahertz portion of the frequency 3 Nano Node SE User Manual Micro Node International Set Internal Radio CTCSS Frequency GIN Touch to open the CTCSS FREQUENCY dialog box Use the up down S buttons to select the desired frequency and then touch the ENTER button CTCSS FREQUENCY Set Internal Radio Squelch Level Touch to open the SQUELCH LEVEL dialog b
24. intervals15s 30s 45s 60s 1 10m 10 60m To unlock the LCD Touch Screen swipe from the bottom of the screen to the top The Buttons to the left of the main window are used to configure Network Parameters and display a splash screen that contains the node s configured Node Numbers Call Sign and software Revision Level A detailed description of these buttons and their functions plus other command control options follows WEI Nano Node SE User Manual Micro Node International 18 0 SYSTEM NETWORK Touch to open the Network configuration screen From here the NET eee individual network parameters and services can be setup SZ S Spo IP ADDRESS EEE 192 468 1 10 gd i E VPN MEE MALE 293 253 2233 0 SET WIFI HIFI GATEMAY IPA I F LGE Zeeche i65 2 4 TT s ZET HF DHI PA 392 168 232 424 HIFI 232i INTERFACE Touch to open the SELECT INTERFACE dialog box select d the desired preset and setup all network parameters for this preset Once the 3 preset are configured simply select which preset you want to use OO Nano Node SE User Manual Micro Node International Seta eee Touch to enter the NETWORK IP ADDRESS for the node then Ska LOUC to save the new value or to abort Touch to enter the NETWORK MASK for the node then EECHER touch ENT to save the new value or to abort a Nano Node SE User Manual Micro Node International M Touch to enter the NETWORK GATEWAY
25. it It is a Monitor Only and has No Control Capability Since the monitor has no capability to control anything on the unit it is not behind the ADMIN password protection system This allows the Monitor to be viewed by anyone while still providing protection to the ADMIN package It can be easily added to any websites by inserting it as an IFrame in an HTML document on that server To access the Monitor Screen point a JavaScript Enabled browser to the URL your ip address p Nano Node SE User Manual Micro Node International 14 0 LCD TOUCH SCREEN ADMINISTRATOR CONSOLE NANO NODE IRLP ECHO Pe S STEM LCD ADMIN is Nano Node s exclusive built In LCD touch screen based menu package used for Monitoring Controlling and Configuring the Nano Node The opening screen displays the units assigned Call Sign and IRLP Node Number It also displays the units EchoLink Number if EcholIRLP has been activated on the unit The four buttons located along the bottom of the screen IRLP RADIO AUDIO and SYSTEM are used to select the various setup and control screens 30 Nano Node SE User Manual Micro Node International IRLP MENU INTERVAL 4 10 Te COS PIT IDI RADIO AUDIO SYSTEM The IRLP SCREEN is the main monitor and control screen for the operation of the Nano Node The IRLP Screen s Main Window shows the following information about the status of the Nano Node The Top Line displays the nodes current s
26. ite button shows its currently selected number in Yellow If a favorite has a DIMF Code assigned to it the label will also show the assigned DTMF code in Aqua The far right Select Fav Button is used to step between the six Favorite Banks Special Function Buttons Ze JE aere H was Bl uode sc west Ret J Fav 01 05 Hi Sc DNR ebe Jj senar LU oan W DTMF Out Q pl End Call Get Log Disable Enable Running s TMF Ree k The Nano Node can have up to 6 Special Functions programmed into it These functions can be either a DIMF Command to the Nano Node or Regenerated DTMF Audio Tones for controlling a repeater linked to the Nano Node Clicking a Special Function button will perform that buttons programmed function Moving the mouse cursor over the button will bring up the Popup Caption Name for that function Note Both the Favorite Node amp Special Function Buttons Captions and DTMF Codes are programmed using the Setup Console Screen Running Start amp Indicators Ename Running The Running Start Button sets the Console mode to Run or Halt When the console is in the Run mode its buttons are active and the display is continuously updated with real time node information The G indicator lights Green when the GPS has satellite status is locked The A indicator lights Yellow during APRS reporting Nano Node SE User Manual Micro Node International The V indicator lights Blue wh
27. lected Or No DTMF Digits Entered It Will Be Displayed In RED Note Multiple Changes Can Be Made To The Screen Before Submitting The Form But The Screen Schedule Changes Are Not Saved Until The Submit Button Is Clicked Be Sure To Click The Submit Button After Making Changes p Nano Node SE User Manual Micro Node International 9 0 SET IRLP IR go 5 ETUP IRL P HODE VARIABL ES ECHO 360535 cs Enter The Gallsign Of Node For The IRLP Environment File IRLP Callsign KFIZA Alphs Numeric Characters Enter The Character Sting To Be Sent As CW ID CW ID String KrIZA S Characters May Be Alpha Mumeric Space Or LEAVE BLANK TO DISABLE CW ID D Enter The GW ID Transmit Interval In Seconds CW ID Interval 600 Value Must Be Between 200 And 1800 Seconds CAN ID Enter The CW ID Courtesy Interval In Seconds Courtesy Delay Value Must Be Between 0 And 290 Seconds set ECHO Check To Force A CW ID At The End Of The ID Interval Even If COS GER Is Active Leaving Unchecked Will Hold The ID Until COS Is COS Force Released system CW ID Check To Trigger ID Timer With COS In Addition To PTT For COS Trigger Repeater Operation Mot Recommended For Simplex Operation hee Tea eee A i ee eee D Oe ee ee N eee oe The Set IRLP Screen is used to setup IRLP Node Environment variables and other variables used by the Nano Node Included on this screen are all the sections necessary for setting the standard IRLP Node Enviro
28. n Click What To SetitTo REMOVE A Node Click On The Node To Remove In The Table Utilities DENY IRLP DENY EchoLink ALLOW EchoLink Deny EchoLink PC USERS Set Console Set Messages Set Schedules LI a Ceo ALLOW ECHO The Allow Deny Screen is used to Allow or Deny specific IRLP and EchoLink nodes the ability to connect to the node To Deny All connections from EchoLink Nodes except those listed in the Allow EchoLink list Check the Deny ALL EchoLink Check Box To Deny All connections from EchoLink PC Users except those listed in the Allow EchoLink list Check the Deny EchoLink PC USERS Check Box To Deny a specific IRLP node from connecting to the node enter the IRLP Node Number of the node to Deny in the White Text Box and click DENY IRLP To Deny a specific EchoLink node from connecting to the node enter the EchoLink Callsign including the L or R for the node to Deny in the White Text Box and click DENY ECHO To Allow a specific EchoLink node to connect if the either the Deny All or Deny PC Users option is checked enter the EchoLink Call sign Including the L or R of the node to Allow in the White Text Box and click ALLOW ECHO To Remove a Node click on the Node Number or Callsign to be Removed from the list e Nano Node SE User Manual Micro Node International 7 0 SET MESSAGES SETUP MESSAGES Winter The Text For SC S TEXT MSG 1 SOSO is TIME and the current temperature is TEMP
29. ndow Tokens can be used to insert current information into the message The Tokens available are listed on the message screen and are entered between brackets Example entering time would cause the message to speak the current time at that point in the message Note Weather Tokens Only Work If a USA NOAA Airport Code Has Been Entered In The Set IRLP Section When you start to enter or change a Text Message the text windows colors will be highlighted the PLAY button will change to SAVE PLAY and a CANCEL button will appear This indicates that what is now displayed is not what is stored in the unit To save e Nano Node SE User Manual Micro Node International the text and hear the message click the SAVE PLAY button To Cancel your changes click the CANCEL button If the SAVE PLAY button is not clicked after changing a Text Message the changes will be lost Enter The Text For ace e TEXT MSG 1 4 Console is TIME and the current temperature is TEMP Map Ed TEST MESSAGE TOKENS DATE TIME COND TEMP HUMO PRES IND WEB Softkey DO NOT USE TOKENS When Building IRLF Connect amp Disconnect Announcements Menu A Menu E Hode Info Set Audio D Upload Nodes Connect amp Disconnect Announcements Select Type Create And Select Which Message Type To Use For IRLP Announcements Text Voice MSS 1 Be Used For Connect and MSG 2 Will Be Used For Disconnect Click Previe
30. nment variables There are a number of sections for setting variables for the Nano Node Custom Functions These functions include settings for Automatic ID Fan Timer Automatic Reflector Reconnect Weather Reports USA Only When some of the values on this screen are changed the Nano Node will need to restart the IRLP Program This restart will occur automatically when the changes are submitted Note Be sure to click the Submit button after Making Changes O Nano Node SE User Manual Micro Node International 10 0 SET ECHO SETUP ECHOLINK OPERATION EcholRLP System Is Currently INSTALLED EchoLink Callsign 7 REQUIRED MTE Enter The Registered EchoLink Callsign Induding The L or H sutfex Example WIABC L EchoLink Password REQUIRED Enter The Registered EchoLink Password For This Callsign Password MUST Be Entered Before Each Install Or install Whodification EchoLink Location apeere Henderson Nv Enter The Location Into To Be Displayed On The EchoLink Station List Example Sen Francisco CA E Mail Address REQUIRED mark micro node com Enter The E Mail Address Where EchoLink Gen E Mail Information About Validation Problems And Changes EchoLink DTMF Prefix The Echo Screen is used to Install or Remove the EcholRLP program This program allows the Nano Node to connect to EchoLink Nodes Before you can install the EcholRLP program the EchoLink Callsign to be used must be registered with EchoLink
31. nsole Screen is used to setup operation information for the Console Maps and Monitor The first section sets the nodes Frequency PL Tone or DCS Code Offset Latitude and Longitude Maps and Monitors will use these values The second section will create a Web Softkey Entering a caption for the Softkey and a web URL will create a SoftKey button on the ADMIN screen When this button is clicked the browser will go to the programmed URL One handy use for this button is to connect to the Micro Node web site s USERS section that has various IRLP related programs To use this feature enter the following for the Softkey URL micro node com users The Third section is used to setup Console Operation Values The Fourth section is used to setup the Favorites node numbers button captions and optional DTMF Code to use for the favorite The Fifth section is used to setup the Special Function commands and button popup captions When some of the values on this screen are changed the Nano Node will need to restart the IRLP Program This restart will occur automatically when the changes are submitted Note Be sure to click the Submit button after Making Changes ee Nano Node SE User Manual Micro Node International 5 0 SET DECODE aha aes SETUP DTMF DECODER RLP Ai EN aoe ECHO 360535 Notes Ename Tel P Enter The DTMF Code To ENABLE The IRLP Node Node ESSE w Ener The DTMF Code To DISABLE The IRLP Node Utilities Enable Enter The DTMF
32. o 5 1 kHz at a linear rate of 500 Hz per second During the sweep each LED above the button represents a 500 Hz Increment Levels may be adjusted during this action me Nano Node SE User Manual Micro Node International 17 0 SYSTEM MENU m NOT SET DIH DIBPLAV MEH PORT GFF 0 The System Screen s Main Window contains buttons for rebooting shutting down the node s operating system or restarting the IRLP system software There are also buttons for setting LCD display attributes DIM Display and LOCK Display timers System Reboot Touch to reboot the operating system This will bring up a Verify Screen touch OK to execute the reset or CANCEL to abort Ed Touch to restart the IRLP system software This will bring up a Verify Screen touch OK to execute the restart or CANCEL to abort System Restart EH Nano Node SE User Manual Micro Node International System Shutdown Touch to safely shutdown the system This will bring up a Verify Screen touch OK to execute the shutdown or CANCEL to abort ARE YOU sure SHUTTING DOWN UNIT SHUT DOWN COMPLETE YOU WANT TO SHUTDOWN THE UNIT PLEASE WAIT BEFORE IT IS NOW OK TO REMOUING POWER REMOUE POWER FROM UNIT Setting LCD display attributes Touch to set LCD back light DIM timer time intervals15s 30s 45s 60s 1 10m 10 60m Touch the screen to bring display to full brightness Touch to set Panel Lock timer time
33. ouncement as message number 1 and the disconnect announcement as message number 2 Note You Must Use Messages Numbers ONE 1 For Connect_and TWO 2 For Disconnect Do Not Use Any Text Message Tokens When Creating An IRLP announcement They Will Not Work And Will Only Speak The Token Use the SELECT TYPE selector to set the type of messages you created for the announcements and then click the button This will play a preview of the selected announcements back to back with the connect announcement being first You may continue to change the messages and preview until the announcements are what you want to send to the IRLP server When you have the announcements you want to use click the SEND SERV button to send them to the IRLP server Note Once The Announcements Have Been Sent It Will Take From Several Hours To A Day For The Announcements To Be Reviewed By IRLP And Updated On Their Server After Uploading The Messages The Two Messages You Used For The Upload Are No Longer Needed And Can Be Change For Use As Normal Messages To hear the announcements currently active on the IRLP server for your node click the CURRENT button MS Nano Node SE User Manual Micro Node International 8 0 SET SCHEDULES K6IB AUTO SCHEDULER RLY stat ENABLE TYPE TIME DAYS OF WEEK WHEN ECHO 304744 ei El E 5 T IO Always U MO TU WE TH FR SA VW Scha e H Conn Console Repeat C SchB C Repe vw ww Mw fw Iv r f idle Map
34. ow show the states of the units various Inputs and Outputs The Buttons below the main display window are used to send commands and control various functions on the Nano Node A detailed description of these buttons and their functions plus other command control options follows Note In operation it should be noted that depending on the state of the node various buttons and options are disabled For example if the node were connected any button or option that would attempt to make a connection would be disabled while the End Call button would be enabled Outputs Last Reconnect Connect Timer EchoLink NODE IDLE 34724 K7IZA R ID Status Wait 5 47 ISE 1 9660 Reflector Codec ADPCM Last Gardai AP 3012 AEGTY R are A Intenral 4 2 fi i E Options DTMF REFL SCHA SCHE see COMMAND LINK ESTABLISHED DN God uhode Reply OK Operation of the Fan and Aux outputs of the unit can be controlled by moving the mouse cursor over the desired Indicator At that time the indicator will show a O and 1 box Click the 0 to force the Output Off or click the 1 to force the Output On To reconnect to any of the Last Connections move the mouse cursor over the desired Last Connection caption The caption will become highlighted Click the highlighted caption to reconnect to that node This only works if the unit is Idle To Disable or Enable the connection Time Out Timer move the mouse cursor over the Time Out caption The caption will
35. ox Use the up down buttons j to select the desired squelch level and then touch the ENTER button SQGUELCH LEVEL 3 Nano Node SE User Manual Micro Node International Set Internal Radio Channel Space Touch to open the SELECT CH SPACE dialog box Select the OR button to configure the internal radio for the proper channel space filtering SELECT CH SPACE 25 4 Khz E Nano Node SE User Manual Micro Node International 16 0 AUDIO MENU 90 48 SEND ID The Audio Screen is used to adjust the various Nano Node audio settings and activate several audio system test operations The Slider adjust the transmit output audio level to the connected radio The Slider adjust the receive input audio level from the connected radio The Slider adjust the transmit output audio level of the CW Identification Tones The Slider adjust the frequency of the CW Identification Tones The frequency can be set to a value between 400 and 2900 Hz Send CWID Test Touch for an instant CW Identification over air using the current Level and Pitch settings Levels and pitch cannot be adjusted during this action Send Audio Calibration Test M Touch to transmit over the air a 10 second 1 kHz tone at a level of 6 dB 50 Modulation Levels may be adjusted during this action Touch to transmit over the air a 10 second Tone Sweep at a level of 6 dB 50 Modulation The sweep freguency starts at 100 Hz and sweeps t
36. s determined to be BT 214 4 190 110 Trying 57 214 190 110 port 15425 Connected to 67 214 190 110 Set Decode Allow Deny Set Messages Set Schedules The Console Screen is the main monitor and control screen for the operation of the Nano Node The Console Main Display Window shows the following information about the status of the Nano Node The Top Line displays the nodes current state If the node is connected it shows the connection type IRLP or ECHO and the connected node s Node Number and Callsign Last_Inj Last_Out and Last_CW display the Last Call Received Last Call Made and Last Call Waiting The connection Time or Date if greater than 24 hours is also shown If the Time shows a minus it is the previous days time displays the length of time the unit has been in its current state displays which Special Option Functions are currently Enabled displays the current state of the Automatic ID Program and display the Codec and Port being used when connected to another node displays whether the Connection Timer is Enabled or Disabled EchoLink displays whether EchoLink operation is Enabled or Disabled This Item is only shown if the EchoIRLP Option is currently installed ee Nano Node SE User Manual Micro Node International The lower Window in the display shows the command response information returned from the last command sent from the console The Indicators to the left of the main wind
37. setup or change the User and Password for Protected Access to the ADMIN program enter the new User and Password in the USER and PASSWORD Text Boxes Be aware that Both Of These Are Case Sensitive After entering the User and Password click the SET PASSWORD Button This will bring up a Verify Screen To set the new User and Password click the SUBMIT Button P Nano Node SE User Manual Micro Node International Note To Disable Password Protection Leave The USER and PASSWORD Text Boxes Blank And Click SET PASSWORD Set Code Key To install a purchased option enter the Code Key provided by Micro Node International in the CODE KEY Text Box and click the SET CODE KEY Button Get Updates To Get and Install New Software Updates enter the Micro Node Update Service URL in the Text Box The current URL for this service can be found on the Micro Node Website micro node com After entering the Server URL click the Button The unit will connect to the server and display a Response Screen from the server Follow the instructions on this screen to continue the Update Process 3 Nano Node SE User Manual Micro Node International 13 0 NODE MONITOR FREQ 446 875 Mhz 100 0 Hz 9660 Reflector CONNECTED 09 57A l 3334 AE6TV S ID Status Pend 7 35 10 14A l 9660 Reflector Codec ADPCM Pot 2074 2 26 TimeOut Disabled DTMF REFL EchoLink Enabled The Nano Node Monitor Screen is a display that shows the real time status of the un
38. t VPN Screen is used to setup and operate the Nano Node as a VPN client VPN Virtual Private Network operation lets the Nano Node use a VPN tunnel to connect to a dedicated VPN server over a connection that does not require any port forwarding for IRLP and EchoLink This allows the Nano Node to work while using Cellular Wi Fi Hotspot connections that do not permit port forwarding The VPN Client is configured using information contained in the Open Lite client cont file located in the Nano Node s VPN CONFIGURATION FOLDER The client conf file can be uploaded to this folder by selecting it using the button and then clicking the Upload button to upload the selected file The file in this folder can be deleted by clicking the Delete All button When you have successfully upload the required client conf configuration file to the configuration folder a START_VPN button and VPN server IPA will be displayed on the setup screen see next page Note VPN Operation Requires A Separate Dedicated VPN Server Setup With Port Forwarding And Configured To Match The VPN Client Configuration File Uploaded To The Nano Node For more information about recommended VPN service providers please E Mail support micro node com 3 Nano Node SE User Manual Micro Node International IRLP 3724 ECHO 360535 DO WOT ATTEMPT ANY CUSTOM SETUP UNLESS YOU HAVE A COMPLETE UNDERSTANDING OF VPN SETUP i ij Ti TL E E E NEI uf DEI sf Le DIF IMPROPER C
39. t be able to show all the GPS information Clicking the IRLP Button will return the display to the IRLP location map Note The GPS Screen requires a GPS receiver connected to the serial port and selecting that port as the GPS port using Set IRLP w Nano Node SE User Manual Micro Node International 4 0 SET CONSOLE SETUP CONSOLE MONITOR and APRS DATA Monitor Displays And APRS Data Console S i T er na n Mhz For APR onitor D ni Node Frequency 446 875 Enter The Node Frequency In Mhz For APRS 8 Monitor Display e Example 145 230 Man Select The Mode Access Type And Enier The one Or Code Velie Leave The Value BLANK If No Access System ls Employed Example PL Tone 100 0 DCS Code 123 Select Tne Mode Repeater Offset For APRS amp Mondor Display Lites Mode Freg Offset Select None For Simplex Menu A Menu H Enter The Lstiude Of This Node For APRS S Mao Monitor WE Mode Latitude 36 130326 Enter A NEGATIVE Number For A SOUTH Latitude Value set Console This Vale MUST BE SET Before APRS Vial Wark Set Decode l Enter The Long ude Of The Node For APRS A Map Montor SE Node Longitude 1145 151884 Enter A NEGATIVE Number For A WEST Longitude Valve This Vahe MUST BE SET Before APRS Vill Work Allow i Deny Changes o The Section Above Vl Cause The IRLP Program To Be Restated When Submited Set Messages Admin Panel Website Softkey Setting Set Schedules The Set Co
40. tate If the node is connected it shows the connection type IRLP or ECHO and the connected node s Node Number and Call Sign Last In Last Out and Last CW display the Last Call Received Last Call Made and Last Call Waiting To reconnect to any of the Last Connections touch the yellow node number within that caption button This only works if the unit is Idle Displays the current state of the Automatic ID Program mr Nano Node SE User Manual Micro Node International Displays the Codec used when connected to another node Displays whether the Connection Timer is Enabled or Disabled To Disable or Enable the connection Time Out Timer touch the blue timeout button to toggle the Time Out Timer operation Displays the length of time the unit has been in its current state The Indicators along the bottom of the main window show the state of the nodes various Inputs and Outputs COS PIT IDT FAN AUX DTM Indicates a valid radio signal is being received Indicates the transmitter is keyed Indicates the Automatic ID is transmitting Indicates the FAN signal on pin 4 of the DB9 ext radio connector is active Indicates the AUX signal on pin 5 of the DB9 ext radio connector is active Indicates a valid DTMF tone has been received The Buttons to the left of the main window are used to send commands and control various functions on the Nano Node A detailed description of these buttons and their functions plus other comm
41. ws To Hear What wll Be Uploaded To The Serwer anes i CURRENT Click Upload To Transfer The Files To The IRLP Server EL OTC Click Current To Hear Your Current IRLF Server Announcements set Decode Allow Deny To Playback a Voice Message click the PLAY button for the desired Voice Message To use a Radio to Record a Voice Message click the button for the desired message he unit will respond with a recording introduction announcement followed by a tone After the tone key up your radio and record the message To end the recording unkey the radio The unit will then play back the message just recorded Note he Node MUST NOT BE CONNECTED When Recording A Voice Message Using A Radio If The Node Is Connected The Record Operation Will Not Be Able To Start Voice Messages may also be created using wave wav files To upload a wave file to a Voice Message click the UPLOAD button for the desired message This will bring up a screen that will allow you to upload a wave file from your computer to the Nano Node The uploaded file must be an uncompressed wave wav file of 90 seconds or less in length and 10 Mbytes or less in size lt a file upload reports that it was Unable To Convert Uploaded File Format then the wave file s format will need to be converted to Uncompressed PCM by other software before it can be uploaded Note The IRLP System and the Nano Node require a native wave file format of 8 Bit 8kHz Mono P
Download Pdf Manuals
Related Search