H 264 User manual
Contents
1. Mode 3 Laser light flashes slowly for intermittent laser positioning Mode 4 Turn off all LED lights Notes 1 When in the single flashlight laser positioning function it is common condition if there is no vibration after press buttons 2 In any mode long press LED amp laser light button and unit will transfer to mode 4 all lights go out 3 The consequence of the mode circle is mode 0 gt mode 1 gt mode 2 gt mode 3 gt mode 4 gt mode 0 9 Turn off and automatically turn off function gt Inthe standby mode press power button 13 around two seconds purple indicator flashes and unit vibrates gt 10 11 3 times unit will turn off When microSD card is full battery used up or standby mode for 3 minutes time slot can be set up unit will shut down automatically MicroSD card error warning and unit turn off automatically The warning system would start in the condition of not inserting microSD card microSD card damaged and microSD card full recording and at the same time the purple indicator flashes quickly with the fast rhythm vibration The unit would turn off automatically 15 seconds later Low power warning and automatic shut down During the system operation state when built in li battery uses up warning system will start Blue and red indicator alternate flash slowly and unit will be slow rhythm vibration and then turn off automatically 15 seconds later Downloading files and2. to videos playback mode purple indicator will be constantly on And then press up button or down button for browsing Short press enter button P into playback interface and short press enter button amp again to playback videos During playback buttons function as following Short press enter button 9 pause or resume play Long press enter button 4 return to previous layer menu During video playing long press down button iP or up button to achieve fast forward or backward play videos Pictures playback refer to Mode transfer chapter short press mode button to video and pictures playback mode purple indicator will be constantly on And then press up button if or down button AT for browsing Short press enter button into playback interface and short press enter button again into pictures automatically play During playback buttons function as following Short press enter button 4 pause or resume play Long press enter button return to previous layer menu During pausing play short press down button T 5 or up button to achieve upward or downward play photos Audio playback refer to Mode transfer chapter short press mode button to audio playback mode purple indicator will be constantly on And then press up button BI or down button t for browsing Short press enter button P into playback interface and sh
3. User manual Before using product please read this manual carefully and keep it properly for future reference when necessary LED PWR R S P Q wn mow D QOM Audio recording mw USER MANUAL Preface Thank you for purchasing the FULL HD Sport Camera 1080P HD Digital waterproof video camera This product is quite small and delicate with wonderful waterproof humanity design With a multipurpose damp it can help you achieve omni directional video monitoring under all kinds of outdoor conditions This manual contains important safety and operating information Please read all the information carefully before you use the device to avoid accidents and keep it for future reference Product Overview As an underwater activity fan are you always impressed by the beautiful scene in the sea or lakes or are you still looking for a companion that can help you record your unforgettable experiences Starting up Insert microSD card press power button iH for 2 seconds Purple LED indicator is lit up with vibration Unit enters into initialized state please wait for a moment until the unit vibrates again purple LED indicator changed to blue this means the unit enters into standby mode gt It may take a few seconds to enter into initialized state depending on capacity and load data quantity of microSD card gt For video resolution is HD 1080P please use at least a brand high speed CLASS 4 or above
4. System parameter setting Please refer to TV playback function chapter via AV or HDMI cable connect to TV unit enters into standby mode Long press enter buttons TV will show system parameter setting interface Buttons functions as below Short press enter button Y to select amp quit setting items Short press up button to upward correct setting item and short press down button to downward correct setting item Long press enter button amp to quite and save setting items Setting illustration gt RESOLUTION 720P30fps 720P60fps 1080P30fps FULL HD30fps initial setting is 720P 60fps A 720P30 1280 720P 30fps B 720P60 1280 720P 60fps suits for outdoor extreme sports video recording We suggest you set up frame number as 30fps to achieve clearer and brighter photo quality when indoor light is dark C 1080P30 1440 1080P 30fps D FULL HD30 1920 1080P 30pfs Full HD shooting Notes 1 Photo quality and memory capacity consumption depend on video resolution please set up video resolution suitable for environment 2 Please use a brand high speed CLASS 4 or above microSD card to achieve better and more fluent photo quality 3 When video resolution is 1280 720P 60fps unit will automatic transfer into night mode if unit records video in darker places to achieve brighter picture quality and at the same time frame number will automatic transfer into 30fps gt QUALITY H M L Illustra
5. 1 2 5 CMOS sensor 12M 4000 3000 JPG Approx 900pcs 4GB 8M 3200 2400 JPG Approx 1200pcs 4GB 5M 2592 1944 JPG Approx 1700pcs 4GB Wideo ie QUALITY QUALITY QUALITY H M L 1920 1080P Approx Approx Approx 30fpsH 264 AVI 41 min 4GB 49 min4GB 62min 4GB R Mas 1440 1080P Approx Approx Approx eso UO 3 0fpsH 264 AVI41 min 4GB 49 min 4GB 62 min 4GB 1280 720P Approx Approx Approx 60fpsH 264 AVIA min 4GB 54 min 4GB 82min 4GB Photo Resolution U v n an iv on A gt ES 1280 720P Approx Approx Approx 62 min 4GB 82 min 4GB 123min 4GB Audio recording ADPCM WAY format 48Khz Mono approx 22h AGB F 2 8 f23mm 120 wide angle Min Illumination 1LUX single boren Around 10hours function usage time ZoMtindoon Scanning Frequency Auto 60Hz 50Hz Lens type Microsoft Windows2000 X P VISTAAVIN 7 mac10 4 ar above The video time related to the memory consumption and video situation the real time date would be some different with the late we mentioned above
6. 5 MIN 15 MIN unit will save the recording video when reaching this timing length When TF card is full unit will delete the former videos automatically one by one to acquire relevant space to store new videos gt BEEP SOUND ON OFF Illustration this function for the purpose of turning on or turning off the button beep sound after connecting to TV gt FORMAT YES NO Illustration Used for resetting microSD card Notes After choosing YES all files in microSD card will be deleted so please take care this point gt AUTO POWER OFF IMIN 2MIN 3 MIN 5 MIN OFF Illustration After setting the related auto power off time the unit would shut down automatically if there is operation Notes If you set on the OFF state unit would not shut down automatically even there is not operation DEFAULT SETTING YES NO Illustration If you want to reset the system choose YES and short press enter button 9 System parameters will return to factory default and unit will restart gt FIRMWARE VERSION Illustration Use for viewing the software version and related information 18 Reset the system Ifthe unit couldn t work well for any reason please press power button and light button i at the same time to reset unit and unit will shut down Please turn on unit again to operate functions Notes After resetting unit please wait for 3 seconds to operate unit Lens 5 Mega pixel
7. outdoor extreme sports video recording We suggest you set up video resolution to 1280 720P 30fps to achieve clearer and brighter photo quality when indoor light is dark When video resolution is 1280 720P 60fps unit will automatic transfer into night mode if unit records video in darker places to achieve brighter picture quality and at the same time frame number will automatic transfer into 30fps 3 4 5 gt When the loop recording function is off the unit will automatically save a file after it fully record a 4GB video fill and then start to record the new file Please remove the waterproof cover in the backside of the unit for a better audio quality when it not use underwater When microSD card is full Loop recording function is off battery used up or standby mode for 3 minutes time slot can be set up unit will shut down automatically Loop recording function Through system parameter setting loop recording function can be open please refer to system parameter setting chapter After start the loop recording function in the video state the unit would automatically save the video file according to the time setting in the system The system time setting have 2mins 5mins 15mins three state options Photo Taking In the unit turning on state short press mode button 453 to photo taking standby mode red indicator will be constantly on Short press execute button F red indicator flashes quickly
8. removable disk function Connect the unit to the computer USB slot Press power button to turn on the unit and a removable disk will appear in my computer you can view the pictures or videos audio record files in the removable disk and you can also copy these files to your computer gt When connected to computer with USB1 1 port please copy the videos to your computer desktop and then replay it to avoid ragged playback Notes 1 In this mode you can short press LED laser light button lt 1 to turn on flashlight function unit can be used as a USB table lamp 2 When connect to the USB ifthe yellow indicator flash it means the unit is in the state of power charging 13 Power Charging gt Plug the AC adaptor into socket and then connect with the camera for battery charging The yellow indicator will be constantly on during charging Indicator goes out after the battery is full charged The charging time is about 3 hours gt Unit also could get power charging through USB cable when you connect the unit to computer it would be start the power charging function To avoid extending charging time please do not press the power button K after you connect it to computer Notes When you connect to adaptor for charging in the status of units staring up the unit would turn off automatically if unit is in standby mode for 3 minutes time slot can be set up but it 1s still in the charging status 14 S
9. this mode long press mode botton and unit enters into next mode Mode4 Audio replaying mode purple indicator is constantly on During this mode long press mode botton J and unit enters into next mode Notes 1 2 The camera will vibrate once and mode indicator changes simultaneously after pressing button which means that operation is in effect please don t press it again When operating mode button unit vibrates twice which means unit transfer from audio recording mode into video recording standby mode Thus you can realize unit enters into video recording standby mode even you couldn t see indicator 3 4 5 Unit can only enter into replaying mode after connecting AV amp HDMI cable otherwise this mode will skip After connecting TV there will be no audio recording mode During replaying mode short press mode button fuj is up operation and long press mode button tyy entering into next mode Please refer to TV out function part Video Recording After unit turns on short press execute button the camera will vibrate once and blue indicator flashes slowly and unit begins to record video Short press execute button again blue indicator flashes quickly for several seconds and unit vibrates once then blue indicator will be constantly on that means video is stopped and saved Notes 1 2 System setting video resolution is 1280 720P 60fps that suits for
10. for several seconds and unit vibrates one time this means the photo taking is finished and save the file successfully And then the red indicator would be constantly on state Notes 1 2 Red indicator will flash quickly during photo taking don t shake the unit in case for a better picture quality When microSD card is full battery used up or standby mode for 3 minutes time slot can be set up unit will shut down automatically Audio recording When the unit in the sate of turning on short press mode button i to audio recording standby mode Short press execute button amp unit will vibrate one time and then the purple indicator would flash slowly and unit begin to record audio Short press execute button 9 again unit vibrates again that means the audio recording is finished and save the file successfully and then the purple indicator would be constantly on state Notes 1 2 7 gt Please remove the waterproof cover in the backside of the unit for a better audio quality during audio recording When microSD card is full battery used up or standby mode for 3 minutes time slot can be set up unit will shut down automatically LED and Laser light Unit provides 2 high brightness LED lights and 1 laser light gt In any turning on state except TV out playback mode short press LED light button t the LED light and laser light will circle in below five modes Mode0 Allligh
11. hooting when charging Put the AC adaptor into socket and then connect with camera long press power button W to turn on the unit Several seconds later purple indicator will be changed to blue unit vibrates one time that means unit enters into the standby mode And the yellow indicator will be constantly on indicating it s in the charging status And this time you could operate any function of the unit Notes Unit will turn off automatically if unit is in standby mode for 3 minutes time slot can be set up but it is still in the charging status 15 TV playback function 1 The unit has AV amp HDMI two options for the audio and video output you could choice any one you like Here we suggest to using the HDMI output for a better HD video quality A ViaAV cable please connect AV cable to the camera s USB amp AV OUT port the yellow plug connect with TV video input port yellow white plug connect with TV audio input port white Pleas set up the signal input by refer to the TV user manual B Via HDMI cable please connect one plug of HDMI cable to the camera s HDMI port another plug connect with TV HDMI port Please set up the signal input by refer to 2 3 4 the TV user manual Turn on camera you can see POWER LOGO and hear short warning tone and then blue indicator will be constantly on and unit enters into standby mode Videos playback refer to Mode transfer chapter short press mode button i
12. microSD card to achieve better and more fluent video quality gt n order to make the camera and TF card reach good compatibility we suggest you to format microSD card by TV setting when you use it first time because it won t reach good compatibility if format microSD card by PC After format microSD card by TV setting it can avoid some situations such as purple indicator flashes quickly warning or camera automatically stops etc Notes The purple indicator flashes quickly and unit will be fast rhythm vibration when turned on without microSD card Please turn off unit and insert microSD card again 2 Mode transfer In the condition of not connecting to AV amp HDMI cable the unit would automatically enter into mode after it turns on Short press mode botton unit will circle inbelow 3 modes Model Video recording standby mode blue indicator will be constantly on Mode2 Photo taking standby mode red indicator will be constantly on Mode3 Audio recording standby mode purple indicator will be constantly on When connect to the AV amp HDMI cable the unit would enter into the mode 1 directly after it turns on Short press mode botton fi unit will circle in below 4 modes Model Video recording standby mode blue indicator will be constantly on Mode2 Photo taking standby mode red indicator will be constantly on Mode3 Video and photo replaying mode purple indicator is constantly on During
13. ort press enter button amp again to playback audios During playback buttons function as following Short press enter button amp pause or resume play Long press enter button P return to previous layer menu During audio playing short press down button t or up button to achieve fast forward or backward play audios Notes 1 2 3 4 Ifthe capacity of video files is too big it would be normal condition to wait some seconds to play the video When the unit is in the video playing state you could adjust the TV volume to get a better audio quality During playing HDMI cable is recommended to achieve better audio and video effect After connect with AV amp HDMI cable and turn on unit will enter into mode 1 automatically Press mode button unit will circle in below 4 modes Mode 1 Standby mode of video recording blue indicator will be constantly on 16 17 Mode 2 Standby mode of photo taking red indicator will be constantly on Mode 3 Video and picture taking playback mode purple indicator will be constantly on In this mode press mode button into next mode Mode 4 Audio playback mode purple indicator will be constantly on In this mode press mode button gt into next mode Shoot when connect to TV Please refer to TV playback function chapter well connect the AV or HDMI cable you could operate the TV output for video and photo taking function
14. t go out Unit would enter into this mode after turn on Model The laser light would light up for 30 seconds for the purpose of positioning the object and then laser light will go out Mode 2 The LED lights are on for the purpose of video recording and strength the color quality in the dark place condition Mode 3 The laser light is on for positioning in all the recording state Mode 4 The LED lights keep quickly flash in a high frequency to save flashlight energy Notes 1 Each time the unit will vibrate after you successfully press the operation button 2 In any mode long press LED amp laser light button T the unit will transfer to modeO all lights go out 3 The consequence of the mode circle is mode 0 gt mode 1 gt mode 2 gt mode 3 gt mode 4 gt mode 0 8 Flashlight and laser positioning function The unit has the single flashlight and laser positioning function When this single function works the DV system would come to the state of turning off it would help to get more longer time for the usage The way to operate as below details gt Long press LED laser light button amp flashlight is lit up short press LED amp laser light button 32 unit will circle in below 5 modes Mode 0 Torch state Flashlight is lit up and can be working up to 10h Mode 1 The laser light is on for positioning purpose Mode 2 The LED lights keep quickly flash in a high frequency to save flashlight energy
15. tion A high video quality setting higher video quality would get and at the same time higher memory capacity consumption Notes Please use a brand high speed CLASS 4 or above microSD card to achieve better and more fluent photo quality 1 2 PHOTO SIZE 5M 8M 12M Illustration 5MP photo resolution is 2592 1944 8MP photo resolution is 3200 2400 12MP photo resolution is 4000 3000 Photo size and memory capacity consumption depend on photo resolution TIME STAMP DATE TIME OFF Illustration it is used for opening or closing images watermark markers FLICKER AUTO 60Hz 50Hz Illustration Setting up light source frequency according to grid frequency to cancel shooting flashing under the lamp TV TYPE NTSC PAL Illustration Choose right video format both for camera and TV during using TV OUT function otherwise TV will show the inharmonious color problem TIME AND DATE YEAR MONTH DATE HOUR MINUTE Illustration Ifthe time stamp shown on videos and photos is wrong please set up correct time and date through this setting Button function A Up button EI or down button used for upward or downward correcting B Enter button used for saving and quitting setting gt RECORD OVERWRITE OFF 2MIN 5 MIN 15 MIN Illustration Setting up loop recording function 1 Initial settings is OFE unit will shut down automatically during shooting when memory is full 2 After setting up 2MIN
Download Pdf Manuals
Related Search