H8/36109 Group FP-100A User System Interface Cable
Contents
1. User system Figure 10 User System Interface Cable Location Example The P1 short connector is used for testing Do not remove the inserted jumper pin Figure 11 P1 Short Connector 17 RENESAS H8 36109 Group FP 100A User System Interface Cable HS36109ECF61H User s Manual Publication Date Rev 1 00 April 6 2006 Published by Sales Strategic Planning Div Renesas Technology Corp Edited by Customer Support Department Global Strategic Communication Div Renesas Solutions Corp 2006 Renesas Technology Corp All rights reserved Printed in Japan RenesasTechnology Corp Sales Strategic Planning Div Nippon Bldg 2 6 2 Ohte machi Chiyoda ku Tokyo 100 0004 Japan ENESAS RENESAS SALES OFFICES http www renesas com Refer to http www renesas com en network for the latest and detailed information Renesas Technology America Inc 450 Holger Way San Jose CA 95134 1368 U S A Tel lt 1 gt 408 382 7500 Fax lt 1 gt 408 382 7501 Renesas Technology Europe Limited Dukes Meadow Millboard Road Bourne End Buckinghamshire SL8 5FH U K Tel lt 44 gt 1628 585 100 Fax lt 44 gt 1628 585 900 Renesas Technology Shanghai Co Ltd Unit 204 205 AZIACenter No 1233 Lujiazui Ring Rd Pudong District Shanghai China 200120 Tel lt 86 gt 21 5877 1818 Fax lt 86 gt 21 6887 7898 Renesas Technology Hong Kong Ltd 7th Floor2. RENESAS 2 2 Connecting User System Interface Cable to User System 4h WARNING Always switch OFF the user system and the emulator product before the USER SYSTEM INTERFACE CABLE is connected to or removed from any part Before connecting make sure that pin 1 on both sides are correctly aligned Failure to do so will result in a FIRE HAZARD and will damage the user system and the emulator product or will result in PERSONAL INJURY The USER PROGRAM will be LOST To connect the cable head to the user system follow the instructions below 2 2 1 Installing IC Socket After checking the location of pin 1 on the IC socket apply epoxy resin adhesive to the bottom of the IC socket for an FP 100A package and fasten it to the user system before soldering 2 2 2 Soldering IC Socket After fastening solder the IC socket for an FP 100A package to the user system Be sure to completely solder the leads so that the solder slops gently over the leads and forms solder fillets Use slightly more solder than the MCU 2 2 3 Inserting Cable Head CAUTION Check the location of pin 1 before inserting Align pin 1 on the IC socket for an FP 100A package on the user system with pin 1 on the user system interface cable head and insert the user system interface cable head into the IC socket on the user system as shown in figure 3 RENESAS 2 2 4 Fastening Cable Head CAUTION Use a Philips type screwdriver whose head matches
3. the screw head The tightening torque must be 0 098 Nem or less If the applied torque cannot be accurately measured stop tightening when the force required to turn the screw becomes significantly greater than that needed when first tightening If a screw is tightened too much the screw head may break or an IC socket contact error may be caused by a crack in the IC socket solder If the emulator does not operate correctly cracks might have occurred in the solder Check conduction with a tester and re solder the IC socket if necessary RENESAS Fasten the user system interface cable head to the IC socket for an FP 100A package on the user system with the two screws M2 5 x 11 mm provided Each screw should be tightened a little at a time alternating between screws on opposing corners Take special care such as manually securing the IC socket soldered area to prevent the soldered IC socket from being damaged by overtightening the screws or twisting the components IC socket IC149 KS 11113 0 manufactured by YAMAICHI ELECTRONICS Co Ltd User system Figure 3 Connecting User System Interface Cable to User System RENESAS 2 2 5 Fastening Cable Body Connect the cable body to the cable head Removing Cable body Push two remove jigs User system Figure 4 Fastening Cable Body RENESAS 2 3 Recommended Dimensions for User System Mount Pad Figure 5 shows the recommended d
4. North Tower World Finance Centre Harbour City 1 Canton Road Tsimshatsui Kowloon Hong Kong Tel lt 852 gt 2265 6688 Fax lt 852 gt 2730 6071 Renesas Technology Taiwan Co Ltd 10th Floor No 99 Fushing North Road Taipei Taiwan Tel lt 886 gt 2 2715 2888 Fax lt 886 gt 2 2713 2999 Renesas Technology Singapore Pte Ltd 1 Harbour Front Avenue 06 10 Keppel Bay Tower Singapore 098632 Tel lt 65 gt 6213 0200 Fax lt 65 gt 6278 8001 Renesas Technology Korea Co Ltd Kukje Center Bldg 18th FI 191 2 ka Hangang ro Yongsan ku Seoul 140 702 Korea Tel lt 82 gt 2 796 3115 Fax lt 82 gt 2 796 2145 Renesas Technology Malaysia Sdn Bhd Unit 906 Block B Menara Amcorp Amcorp Trade Centre No 18 Jalan Persiaran Barat 46050 Petaling Jaya Selangor Darul Ehsan Malaysia Tel lt 603 gt 7955 9390 Fax lt 603 gt 7955 9510 Colophon 6 0 H8 36109 Group FP 100A User System Interface Cable HS36109ECF61H User s Manual ENESAS Renesas Electronics Corporation 1753 Shimonumabe Nakahara ku Kawasaki shi Kanagawa 211 8668 Japan REJ10J1318 0100
5. Electronics products or if you have any other inquiries Note 1 Renesas Electronics as used in this document means Renesas Electronics Corporation and also includes its majority owned subsidiaries Note 2 Renesas Electronics product s means any product developed or manufactured by or for Renesas Electronics C 7 D qa 0 lt D D ENESAS H8 36109 Group FP 100A User System Interface Cable HS36109ECF61H User s Manual Renesas Microcomputer Development Environment System H8 Family H8 300H Tiny Series HS36109ECF61HE Renesas Electronics Rev 1 00 2006 04 www renesas com Keep safety first in your circuit designs Renesas Technology Corp puts the maximum effort into making semiconductor products better and more reliable but there is always the possibility that trouble may occur with them Trouble with semiconductors may lead to personal injury fire or property damage Remember to give due consideration to safety when making your circuit designs with appropriate measures such as i placement of substitutive auxiliary circuits ii use of nonflammable material or iii prevention against any malfunction or mishap Notes regarding these materials These materials are intended as a reference to assist our customers in the selection of the Renesas Technology Corp product best suited to the customer s application they do not convey any license under any intellectual proper
6. PATENT IN NO EVENT SHALL RENESAS BE LIABLE FOR ANY DIRECT INCIDENTAL OR CONSEQUENTIAL DAMAGES OF ANY NATURE OR LOSSES OR EXPENSES RESULTING FROM ANY DEFECTIVE EMULATOR PRODUCT THE USE OF ANY EMULATOR PRODUCT OR ITS DOCUMENTATION EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES EXCEPT AS EXPRESSLY STATED OTHERWISE IN THIS WARRANTY THIS EMULATOR PRODUCT IS SOLD AS IS AND YOU MUST ASSUME ALL RISK FOR THE USE AND RESULTS OBTAINED FROM THE EMULATOR PRODUCT TENESAS State Law Some states do not allow the exclusion or limitation of implied warranties or liability for incidental or consequential damages so the above limitation or exclusion may not apply to you This warranty gives you specific legal rights and you may have other rights which may vary from state to state The Warranty is Void in the Following Cases Renesas shall have no liability or legal responsibility for any problems caused by misuse abuse misapplication neglect improper handling installation repair or modifications of the emulator product without Renesas prior written consent or any problems caused by the user system All Rights Reserved This user s manual and emulator product are copyrighted and all rights are reserved by Renesas No part of this user s manual all or part may be reproduced or duplicated in any form in hard copy or machine readable form by any means available without Renesas prior written consent Other Important Thi
7. PROGRAM will be LOST CAUTION Place the host computer and user system so that no cable is bent or twisted A bent or twisted cable will impose stress on the user interface leading to connection or contact failure Make sure that the host computer and the user system are placed in a secure position so that they do not move during use nor impose stress on the user interface VI TENESAS Preface Thank you for purchasing this user system interface cable HS36109ECF61H for the Renesas original microcomputer H8 36109 group The HS36109ECF61H is a user system interface cable that connects an H8 36109 group E6000 emulator HS3664EPI61H or HS3664EPI62H hereinafter referred to as the emulator to the IC socket for an FP 100A package for the H8 36109 group MCU on the user system and to the H8 36109 group expansion I O board HS36109EIO61H RENESAS Contents Section 1 Configuration ii ee 1 Section 2 Connection Procedures eushueninn en 3 2 1 Connecting User System Interface Cable to Expansion VO Board 3 2 2 Connecting User System Interface Cable to User System su esee seesseeeseeieeei 5 2 2 1 Installing IE Socket iia nit klin 5 22 2 Soldering 1C Socket sss rs ILa 5 22 3 Insertinp Gablelead s o tuo resas iaa wesen 5 22 4 Fastening Cable Head 2uas00 Rennens 6 22 5 Fastening Cable Body hei les 8 2 3 Recommended Dimensions fo
8. To our customers Old Company Name in Catalogs and Other Documents On April 1 2010 NEC Electronics Corporation merged with Renesas Technology Corporation and Renesas Electronics Corporation took over all the business of both companies Therefore although the old company name remains in this document it is a valid Renesas Electronics document We appreciate your understanding Renesas Electronics website http www renesas com April 1 2010 Renesas Electronics Corporation Issued by Renesas Electronics Corporation http www renesas com Send any inquiries to http www renesas com inguiry TENESAS 10 11 12 Notice All information included in this document is current as of the date this document is issued Such information however is subject to change without any prior notice Before purchasing or using any Renesas Electronics products listed herein please confirm the latest product information with a Renesas Electronics sales office Also please pay regular and careful attention to additional and different information to be disclosed by Renesas Electronics such as that disclosed through our website Renesas Electronics does not assume any liability for infringement of patents copyrights or other intellectual property rights of third parties by or arising from the use of Renesas Electronics products or technical information described in this document No license express implied or otherwise is gra
9. but Renesas Electronics does not warrant that such information is error free Renesas Electronics assumes no liability whatsoever for any damages incurred by you resulting from errors in or omissions from the information included herein Renesas Electronics products are classified according to the following three quality grades Standard High Quality and Specific The recommended applications for each Renesas Electronics product depends on the product s quality grade as indicated below You must check the quality grade of each Renesas Electronics product before using it in a particular application You may not use any Renesas Electronics product for any application categorized as Specific without the prior written consent of Renesas Electronics Further you may not use any Renesas Electronics product for any application for which it is not intended without the prior written consent of Renesas Electronics Renesas Electronics shall not be in any way liable for any damages or losses incurred by you or third parties arising from the use of any Renesas Electronics product for an application categorized as Specific or for which the product is not intended where you have failed to obtain the prior written consent of Renesas Electronics The quality grade of each Renesas Electronics product is Standard unless otherwise expressly specified in a Renesas Electronics data sheets or data books etc Standard Computers
10. ct This emulator product should only be used by those who have carefully read and thoroughly understood the information and restrictions contained in the user s manual Do not attempt to use the emulator product until you fully understand its mechanism It is highly recommended that first time users be instructed by users that are well versed in the operation of the emulator product TENESAS LIMITED WARRANTY Renesas warrants its emulator products to be manufactured in accordance with published specifications and free from defects in material and or workmanship Renesas at its option will replace any emulator products returned intact to the factory transportation charges prepaid which Renesas upon inspection shall determine to be defective in material and or workmanship The foregoing shall constitute the sole remedy for any breach of Renesas warranty See the Renesas warranty booklet for details on the warranty period This warranty extends only to you the original Purchaser It is not transferable to anyone who subsequently purchases the emulator product from you Renesas is not liable for any claim made by a third party or made by you for a third party DISCLAIMER RENESAS MAKES NO WARRANTIES EITHER EXPRESS OR IMPLIED ORAL OR WRITTEN EXCEPT AS PROVIDED HEREIN INCLUDING WITHOUT LIMITATION THEREOF WARRANTIES AS TO MARKETABILITY MERCHANTABILITY FITNESS FOR ANY PARTICULAR PURPOSE OR USE OR AGAINST INFRINGEMENT OF ANY
11. der certain use conditions Further Renesas Electronics products are not subject to radiation resistance design Please be sure to implement safety measures to guard them against the possibility of physical injury and injury or damage caused by fire in the event of the failure of a Renesas Electronics product such as safety design for hardware and software including but not limited to redundancy fire control and malfunction prevention appropriate treatment for aging degradation or any other appropriate measures Because the evaluation of microcomputer software alone is very difficult please evaluate the safety of the final products or system manufactured by you Please contact a Renesas Electronics sales office for details as to environmental matters such as the environmental compatibility of each Renesas Electronics product Please use Renesas Electronics products in compliance with all applicable laws and regulations that regulate the inclusion or use of controlled substances including without limitation the EU RoHS Directive Renesas Electronics assumes no liability for damages or losses occurring as a result of your noncompliance with applicable laws and regulations This document may not be reproduced or duplicated in any form in whole or in part without prior written consent of Renesas Electronics Please contact a Renesas Electronics sales office if you have any questions regarding the information contained in this document or Renesas
12. entially hazardous situation which if not avoided could result in death or serious injury A CAUTION CAUTION indicates a potentially hazardous situation which if not avoided may result in minor or moderate injury CAUTION CAUTION used without the safety alert symbol indicates a potentially hazardous situation which if not avoided may result in property damage NOTE emphasizes essential information TENESAS 4 WARNING Observe the precautions listed below Failure to do so will result in a FIRE HAZARD and will damage the user system and the emulator product or will result in PERSONAL INJURY The USER PROGRAM will be LOST 1 Do not repair or remodel the emulator product by yourself for electric shock prevention and quality assurance 2 Always switch OFF the host computer and user system before connecting or disconnecting any CABLES or PARTS 3 Connect the connectors in the user system and in the user interface cable by confirming the correct direction RENESAS Warnings on Emulator Usage Be sure to read and understand the warnings below before using this emulator Note that these are the main warnings not the complete list 4 WARNING Always switch OFF the host computer and user system before connecting or disconnecting any CABLES or PARTS Failure to do so will result in a FIRE HAZARD and will damage the user system and the emulator product or will result in PERSONAL INJURY The USER
13. imensions for the mount pad footprint for the user system with an IC socket for an FP 100A package IC149 KS 11113 0 manufactured by YAMAICHI ELECTRONICS Co Ltd Note that the dimensions in figure 5 are somewhat different from those of the actual chip s mount pad 27 4 min 21 4 max 0 65 x 29 18 85 0 1 0 65 0 05 0 35 d5 a m 0 65 0 05 p 0 65 x 19 12 35 0 1 Figure 5 Recommended Dimensions for Mount Pad RENESAS 2 4 Dimensions for User System Interface Cable Head The dimensions for the user system interface cable head are shown in figure 6 Unit mm Tolerance 0 5 mm Figure 6 Dimensions for User System Interface Cable Head RENESAS 2 5 Resulting Dimensions after Connecting User System Interface Cable The resulting dimensions after connecting the user system interface cable head to the user system are shown in figure 7 Unit mm N IC socket Tolerance 0 5 mm IC149 KS 11113 0 manufactured by YAMAICHI ELECTRONICS Co Ltd User system Figure 7 Resulting Dimensions after Connecting User System Interface Cable 11 RENESAS 12 RENESAS Section 3 Installing the MCU to the User System CAUTION 1 Check the location of pin 1 before inserting 2 If the MCU does not operate correctly cracks might have occurred in the solder Check conduction with a tester and re solder the IC
14. k Select target clock t with the CLOCK command emulator command Supply the external clock from the user system to the emulator by inputting the external clock from the OSC1 terminal on the cable head or connecting a crystal oscillator to the OSC1 and OSC2 terminals When a crystal oscillator is inserted into the OSC1 and OSC2 terminals for the system clock the clock is generated by the oscillator circuits shown in figure 9 To input an external clock from the user system input clock pulses satisfying the specifications described in the MCU hardware manual into the OSCI terminal The system clock 6 frequency is the same as the external clock frequency To use the external clock on the user system as the subclock Select target clock sub t with the CLOCK command emulator command Supply the external clock from the user system to the emulator by inputting the external clock from the X1 terminal on the cable head or connecting a crystal oscillator to the X1 and X2 terminals When a crystal oscillator is inserted into the X1 and X2 terminals for the subclock the clock is generated by the oscillator circuits shown in figure 9 To input an external clock from the user system input clock pulses satisfying the specifications described in the MCU hardware manual into the X1 terminal The subclock dw frequency is the same as the external clock frequency RENESAS Figure 9 shows the system clock oscillator on the user system interface cable and the
15. ngs to Keep in Mind 1 Circuitry and other examples described herein are meant merely to indicate the characteristics and performance of Renesas semiconductor products Renesas assumes no responsibility for any intellectual property claims or other problems that may result from applications based on the examples described herein 2 No license is granted by implication or otherwise under any patents or other rights of any third party or Renesas Figures Some figures in this user s manual may show items different from your actual system Limited Anticipation of Danger Renesas cannot anticipate every possible circumstance that might involve a potential hazard The warnings in this user s manual and on the emulator product are therefore not all inclusive Therefore you must use the emulator product safely at your own risk In RENESAS SAFETY PAGE READ FIRST e READ this user s manual before using this emulator product e KEEP the user s manual handy for future reference Do not attempt to use the emulator product until you fully understand its mechanism DEFINITION OF SIGNAL WORDS A This is the safety alert symbol It is used to alert you to potential personal injury hazards Obey all safety messages that follow this symbol to avoid possible injury or death A DANGER DANGER indicates an imminently hazardous situation which if not avoided will result in death or serious injury A WARNING WARNING indicates a pot
16. nted hereby under any patents copyrights or other intellectual property rights of Renesas Electronics or others You should not alter modify copy or otherwise misappropriate any Renesas Electronics product whether in whole or in part Descriptions of circuits software and other related information in this document are provided only to illustrate the operation of semiconductor products and application examples You are fully responsible for the incorporation of these circuits software and information in the design of your equipment Renesas Electronics assumes no responsibility for any losses incurred by you or third parties arising from the use of these circuits software or information When exporting the products or technology described in this document you should comply with the applicable export control laws and regulations and follow the procedures required by such laws and regulations You should not use Renesas Electronics products or the technology described in this document for any purpose relating to military applications or use by the military including but not limited to the development of weapons of mass destruction Renesas Electronics products and technology may not be used for or incorporated into any products or systems whose manufacture use or sale is prohibited under any applicable domestic or foreign laws or regulations Renesas Electronics has used reasonable care in preparing the information included in this document
17. office equipment communications equipment test and measurement equipment audio and visual equipment home electronic appliances machine tools personal electronic equipment and industrial robots High Quality Transportation equipment automobiles trains ships etc traffic control systems anti disaster systems anti crime systems safety equipment and medical equipment not specifically designed for life support Specific Aircraft aerospace equipment submersible repeaters nuclear reactor control systems medical equipment or systems for life support e g artificial life support devices or systems surgical implantations or healthcare intervention e g excision etc and any other applications or purposes that pose a direct threat to human life You should use the Renesas Electronics products described in this document within the range specified by Renesas Electronics especially with respect to the maximum rating operating supply voltage range movement power voltage range heat radiation characteristics installation and other product characteristics Renesas Electronics shall have no liability for malfunctions or damages arising out of the use of Renesas Electronics products beyond such specified ranges Although Renesas Electronics endeavors to improve the quality and reliability of its products semiconductor products have specific characteristics such as the occurrence of failure at a certain rate and malfunctions un
18. r User System Mount Pad e sees seeseeeiei 9 2 4 Dimensions for User System Interface Cable Head urs4s004ssrsnensnensnernnennen 10 2 5 Resulting Dimensions after Connecting User System Interface Cable 11 Section 3 Installing the MCU to the User System uuersnersnnesnsernnnensnr een nn 13 Section 4 Verifying Opera Gh nee a 15 o 17 ji RENESAS Section 1 Configuration CAUTION Use an IC149 KS 11113 0 socket manufactured by YAMAICHI ELECTRONICS Co Ltd for the FP 100A package IC socket on the user system Figure 1 shows the configuration of the HS36109ECF61H user system interface cable for the FP 100A package To expansion I O board CTS screws M3 x 6 mm for fastening the emulator station Screws M2 5 x 11 mm for fastening cable head Socket cover e IC socket Figure 1 HS36109ECF61H User System Interface Cable RENESAS Table 1 lists the HS36109ECF61H components Please make sure you have all of these components when unpacking Table 1 HS36109ECF61H Components No Component Quantity Remarks 1 Cable body 1 Cable 2 Cable head 1 3 IC socket 1 For the FP 100A package 4 Socket cover 1 For installing an FP 100A packaged MCU 5 Screws M2 5 x 11 mm 2 For fastening cable head 6 CTS screws M3 x6 mm 2 For fastening the emulator station 7 Documentation 1 User s manual for HS36109ECF61H this man
19. socket if necessary Check the location of pin 1 before inserting the MCU into the IC socket on the user system as shown in figure 8 After inserting the MCU put the socket cover on the MCU and the IC socket and fasten it with the four corner tabs 4 Socket cover IC socket IC149 KS 11113 0 manufactured by YAMAICHI ELECTRONICS Co Ltd User system Corner tab Figure 8 Installing MCU to User System RENESAS 14 RENESAS Section 4 Verifying Operation 1 Turn on the emulator according to the procedures described in the H8 3664 E6000 Emulator User s Manual HS3664EPI6 1HE U2 or HS3664EPI62HE U2 2 Verify the user system interface cable connections by accessing ports and checking the bus states of the pins If an error is detected recheck the soldered IC socket and the location of pin 1 3 The emulator connected to this user system interface cable supports two kinds of clock sources an emulator internal clock and an external clock on the user system for the MCU clock and subclock For details refer to the H8 3664 E6000 Emulator User s Manual HS3664EPI61HE U2 or HS3664EPI62HE U2 To use the emulator internal clock Select the clock in the emulator station as the system clock 6 and the subclock dw by using the CLOCK command emulator command Note that the on chip oscillator function is not supported To use the external clock on the user system as the system cloc
20. subclock input specifications R5 3 3 MQ R13 10 kQ HCUO4 To E6000 R12 2 2 kQ To E6000 emulator emulator R2 270 Q HCU04 HCU04 HCU04 OSC1 OSC2 System clock oscillator Subclock oscillator Figure 9 System Clock Oscillator and Subclock Input Specifications 16 RENESAS Ze 4 Section 5 Notice Make sure that pin on the user system IC socket is correctly aligned with pin 1 on the cable head before inserting the cable head into the user system IC socket The dimensions of the recommended mount pad for the user system IC socket are different from those of the MCU This user system interface cable is specifically designed for the HS3664EPI61H or HS3664EPI62H emulator Do not use this cable with any other emulator station To prevent breaking of wires in the cable body do not place heavy or sharp metal objects on the user system interface cable While the emulator station is connected to the user system with the user system interface cable force must not be applied to the cable head Place the emulator station user system interface cable and user system as shown in the example in figure 10 Connecting User System Interface Cable to Expansion I O Board 6 Place components so that the expansion I O board cable body Expansion I O board Cable and cable head are parallel to the user system Emulator station Cable head is parallel O g to emulator station Cable head is parallel to user system
21. tal system before making a final decision on the applicability of the information and products Renesas Technology Corp assumes no responsibility for any damage liability or other loss resulting from the information contained herein Renesas Technology Corp semiconductors are not designed or manufactured for use in a device or system that is used under circumstances in which human life is potentially at stake Please contact Renesas Technology Corp or an authorized Renesas Technology Corp product distributor when considering the use of a product contained herein for any specific purposes such as apparatus or systems for transportation vehicular medical aerospace nuclear or undersea repeater use The prior written approval of Renesas Technology Corp is necessary to reprint or reproduce in whole or in part these materials If these products or technologies are subject to the Japanese export control restrictions they must be exported under a license from the Japanese government and cannot be imported into a country other than the approved destination Any diversion or reexport contrary to the export control laws and regulations of Japan and or the country of destination is prohibited Please contact Renesas Technology Corp for further details on these materials or the products contained therein IMPORTANT INFORMATION READ FIRST READ this user s manual before using this emulator product e KEEP the user s manual handy for f
22. ty rights or any other rights belonging to Renesas Technology Corp or a third party Renesas Technology Corp assumes no responsibility for any damage or infringement of any third party s rights originating in the use of any product data diagrams charts programs algorithms or circuit application examples contained in these materials All information contained in these materials including product data diagrams charts programs and algorithms represents information on products at the time of publication of these materials and are subject to change by Renesas Technology Corp without notice due to product improvements or other reasons It is therefore recommended that customers contact Renesas Technology Corp or an authorized Renesas Technology Corp product distributor for the latest product information before purchasing a product listed herein The information described here may contain technical inaccuracies or typographical errors Renesas Technology Corp assumes no responsibility for any damage liability or other loss rising from these inaccuracies or errors Please also pay attention to information published by Renesas Technology Corp by various means including the Renesas Technology Corp Semiconductor home page http www renesas com When using any or all of the information contained in these materials including product data diagrams charts programs and algorithms please be sure to evaluate all information as a to
23. ual RENESAS Section 2 Connection Procedures 2 1 Connecting User System Interface Cable to Expansion I O Board AWARNING Observe the precautions listed below Failure to do so will result in a FIRE HAZARD and will damage the user system the emulator product and the expansion I O board or will result in PERSONAL INJURY The USER PROGRAM will be LOST 1 Always switch OFF the user system and the emulator product before the USER SYSTEM INTERFACE CABLE is connected to or removed from any part Before connecting make sure that pin 1 on both sides are correctly aligned The user system interface cable dedicated to the emulator must be used To connect the cable body to the emulator station follow the instructions below 1 Make sure the user system and emulator station are turned off CAUTION When connecting or removing the user system interface cable apply force only in the direction suitable for connection or removal while making sure not to bend or twist the cable or connectors Otherwise the connectors will be damaged RENESAS 2 After making sure the direction of the cable body connector is correct firmly insert the cable body connector into the expansion I O board socket written as USER INTERFACE CABLE and fasten the expansion I O board with two CTS screws M3 x 6 mm figure 2 Cable body connector CTS screws M3 x 6 mm Figure 2 Connecting User System Interface Cable to Expansion I O Board
24. uture reference Do not attempt to use the emulator product until you fully understand its mechanism Emulator Product Throughout this document the term emulator product shall be defined as the following products produced only by Renesas Technology Corp excluding all subsidiary products e User system interface cable HS36109ECF61H The user system or a host computer is not included in this definition Purpose of the Emulator Product This emulator product is a software and hardware development tool for systems employing the Renesas microcomputer This emulator product must only be used for the above purpose Limited Applications This emulator product is not authorized for use in MEDICAL atomic energy aeronautical or space technology applications without consent of the appropriate officer of a Renesas sales company Such use includes but is not limited to use in life support systems Buyers of this emulator product must notify the relevant Renesas sales offices before planning to use the product in such applications Improvement Policy Renesas Technology Corp including its subsidiaries hereafter collectively referred to as Renesas pursues a policy of continuing improvement in design performance and safety of the emulator product Renesas reserves the right to change wholly or partially the specifications design user s manual and other documentation at any time without notice Target User of the Emulator Produ
Download Pdf Manuals
Related Search