Grundig GRP6000 DTT DVD
Contents
1. 4 Return to the Digital menu by pressing Setting the bit rate Here you choose the possible digital resolution and the dynamic range possible of the output signal in order to adapt the signal to the decoder 1 Select Bits and press OK 2 Select the desired value 16 20 or 24 with v or A and press gt ad di OK to confirm Setting the sampling rate This function is used to limit the sampling rate of the digital multi channel amplifier 1 Select Clock rate and press OK This has been set to 48 kHz at the factory 38 DISC MODE USING EXTERNAL DRIVES Clock rate 96 kHz 48 kHz Digital Back Quit Output format LEONE Clock rate Original Output level 0 dB Back Q Quit Select the desired value Original 96 kHz or 48 kHz with v or A and confirm with OK Use Original for DVDs with a 96 kHz sound signal The sound signal is output at the AUDIO OUT L R sockets and if supported by the DVD at the DIGITAL AUDIO OUT socket Use 96 kHz for DVDs with a 96 kHz sound signal for optimum analogue sound output at the AUDIO OUT L R sockets No sound signal at the DIGITAL AUDIO OUTK socket Use 48kHz for DVDs with a 48 kHz sound signal The signal is output at the AUDIO OUT L R socket and at the DIGITAL AUDIO OUT socket 96 kHz sound signal is converted into 48 kHz Se2. with v or A and press OK to confirm A qo Back Q Quit Note When the No effect line is selected the surround sound is switched off Selecting the intensity of the surround sound effects VERS 1 Select Intensity and press OK 2 Select the desired intensity Low Medium or High with v or 3 A and press OK to confirm QUIT 3 Press to quit the menu A ep Back Quit 32 pisc MODE PICTURE SETTINGS Selecting the picture format for your television This setting is dependent on the chosen TV format see the Selecting the screen format for your television chapter If 4 3 format is selected you can set Pan amp Scan for wide screen playback using the full height of the screen but with the left and right edges of the picture cropped Letterbox for wide screen playback with black bars on the top and bottom edges of the screen If 16 9 format is selected you can set Use TV settings for resetting the format by the television set Automatic for adapting the picture format automatically by the player receiver Original for 4 3 playback with black bars on the lef and right edges of the screen Cinema zoom where the picture is enlarged to the width of the screen and the upper and lower edges of the picture are cropped MENU TEE 1 Press O to call Up the main menu Letterbox Extended settings 2 Select Picture menu
3. Depending on the DVD video CD you are using you may have to a select a title or chapter from the DVD s video CD s table of contents Use the A Sa or buttons to select it and then press OK to confirm If the selection is numbered use the 1 O keys Calling up information You can call up information on the title chapter and playing time for display on the screen Press OK to see the Info line This provides information on The type of disc current title number current chapter number playing time remaining playing time language options audio system subtitle language camera position and bit rate 2 Press OK to hide the Info line DISC MODE DVD VIDEO CD PLAYBACK Selecting titles or chapters If a DVD or video CD contains several titles and or chapters you can select from among them The T and stet a boxes in the info line will tell you whether a DVD contains more than one title or chapter 1 Call up the contents of the DVD video CD by pressing If the DVD video CD has a title menu it will appear on the screen x5 2 Ifthe selection options are numbered select the desired title and section using zl OK 3 If the options are not numbered select titles and sections with A v or gt and active with OK Playback begins with title chapter selected Selecting chapters Using the numerical buttons of the remote contro
4. SETUP and press OK Select CHECK FOR DOWNLOAD and press OK Lui eee TR ep Im E Bed eo La TI 2 3 If no download is available press O to exit 4 Press OK to start Alternatively schedule the download for later The download can take up to 20 minutes so please be patient After the download details about the new software will be displayed for you There may also be a telephone number to call in case of any difficulty If the download fails try again later During part of the download DO NOT switch off the receiver this warning is displayed on screen 18 TV MODE Technical Inlarmaltion Ell ME Lise PR Lobrory T ABOIDIDDETRQI KS OTHER INFORMATION _ Technical information details The technical information screen displays the hardware and software information of the receiver This information may be required by the service agent or service call operator 1 Press O select SETUP and press OK 2 Select TECHNICAL INFORMATION and press OK Electricity consumption The Receiver Player will always switch to standby when you press the key but will still use energy running the clock and other functions of the Receiver Player To minimise this energy drain if you press and hold the key the Receiver Player will switch off all functions In this mode the Receiver Player only uses a tiny amount of energy but it will take a litt
5. 54 ent na 17 2 de 2 3 00 5 1 Jeo 14 FN 3 26 Changing the dubbed language This setting switches out of the preset dubbed language when the DVD offers alternatives 1 During playback press Yo Display for example Ode 2 3 DC 5 1 appears briefly and the current dubbed language is displayed 2 To set the desired language press Y repeatedly Selecting and displaying subtitles If the current DVD provides subtitles they can be displayed on your TV screen When subtitles in several languages are available you can select your language of choice 1 During playback press SO a Display for example de 2 14 appears briefly and the current dubbed language is displayed 2 To set the language for the subtitles press repeatedly Note To switch off the subtitles keep pressing o until appears in the GREEN display or press and hold down a Selecting and playing scenes You can mark a scene on the DVD which you can then select directly during playback The bookmark is retained when you remove the DVD The Receiver Player can store book marks for up to 5 different discs Setting a mark 1 During playback press Note This mark is deleted automatically when you set a new mark Playing selected scenes 1 During playback press and hold down Playback starts at the point marked DISC MODE MP3 CD PLAYBACK Type MP3 Title M
6. Display Compartment for DVDs CDs Cursor buttons for navigation within the Receiver Player menus E MENUO Access Main Menu INFO Call up information banner EXIT Select previous menus det Select various functions in the menus Confirms selections made in menus O P Switches to next channel O P Switches to previous channel OVERVIEW The back of the Receiver Player DO NOT REMOVE COVERS HAZARD LIVE PARTS icense from Dolby at Apparatus Claims of U S patent Nos Wee 4 631 603 4 577 216 4 819 098 and 4 907 093 licensed for limited viewing uses only of Dolby Laboratories Unpublished Works oratories Inc All rights reserve AERIAL IN ontidentia 1992 1997 Dolby La o o o LOOP THROUGH BEAB MADE IN U K CE 2 220 240 V 50 60 Hz 25 W RF IN RF OUT 1 amp 2 AUDIO OUT L R TV SCART VCR SCART DIGITAL AUDIO OUT VIDEO OUT S VIDEO OUT Connector for TV aerial Connector for VCR and second TV RF outputs Audio output jacks left right channel for connection to a HiFi system Video audio output jack for connecting a television set and a VCR Audio output jack coaxial for PCM MPEG2 AC3 DTS signals for connecting a digital multichannel audio video amplifier Composite video output jack Super VHS output jack 220 240V 50 60 Hz 20W Socket for power cord Caution Do not connect any
7. Franz sisch Niederl ndisch Italienisch Spanisch Portugiesisch Schwedish gt o D Ko D Ke D A sp Back Quit Subtitle DEWA Norwegian Finnish ff Disc default A sp Qe Back Quit Menu language German English French Dutch Italian Spanish Portuguese Schwedish v A qe Back Quit 36 Language settings MENU e 1 Press to call up the main menu p 2 Select Disc preferences and press OK Note For further operation see the following sections each one starting from Step 1 Selecting the dubbed language If several languages are available on the current DVD the sound is played back in the language you have selected If the language you select is not on the DVD the first dubbed language available is automatically selected 1 Select Audio language and press OK 2 Select the desired dubbed language with v or A and confirm with OK Selecting the language for the subtitles If subtitles are available on the current DVD they are played back in the language you have selected If the language you have selected for the subtitles is not on the DVD the first language available is automatically selected 1 Select Subtitle and press OK 2 Select the desired dubbed language with v or A and activate with OK Note When the Off line is selected the subtitles are not displayed Selecting t
8. Press to quit the menu q pisc MODE CUSTOM SETTINGS Settings in the Installation menu MENU Installation 1 Press to call up the main menu English Video Output 4 3 e SS SH 2 Select Installation and press OK Extended settings Note For further operation see the following sections each one starting from Step 1 ged Back Quit Software status and dealer menu Here you can get information about your Receiver Player s sofware version The Dealer Service menu is reserved for the authorised dealer 1 Select Extended settings and press OK Service menu System information 2 Select Service menu with OK 3 Select System Information and press OK Qc Back Quit QUIT 4 Press O to quit the menu Setting the TV standard The colour norm of the Receiver Player s screen menus has to be adapted to the format of the television Select NTSC for televisions with NTSC norm PAL for televisions with PAL norm and Auto for televisions with multi norm Select TV STANDARD and press OK 2 Selectthe desired setting NTSC PAL or AUTO with za or A and TV standard NTSC press OK to confirm PAL 3 Press O fo quit the menu Qe Back Q Quit DISC MODE CUSTOM SETTINGS Disc preferences Audio language English Default Menu language English A qe Back Quit Deutsch English
9. all locked channels will be unlocked until the receiver is next in standby Should any censored or locked channel be selected using the TIMER PROGRAMMING function you must enter the PIN before the event is stored Should any channel be censored or locked after the TIMER PROGRAMMING function has been set you will be prompted for the PIN before access is granted Entering an incorrect PIN will only allow the status of the channel to be displayed upon a blank screen CENSORED 17 TV MODE UPGRADING YOUR RECEIVER 1 From time to time new services are launched which may require your receiver to be upgraded with new software before you can use them Sometimes new features may be introduced to enhance your receiver Notification Foun ined Available This menu is automatically displayed when a new Over Air Download is detected after switch on You now have three options To start the download immediately press OK Select DOWNLOAD LATER to set a timer event to receive the new software during the night Refuse the download at this time by pressing a However the download may be re detected and indicated the next time you switch on It is highly recommended that you keep your receiver up to date Check for download You can manually check to see if new software is available for download IF there is one available you will see the download menu as above To check MENU 1 Press O select
10. and audio signals from compact discs DVD and CD and receiving Digital Television signals Any other use is expressly prohibited If the Receiver Player is subject to a sudden change in temperature for example if brought in from the cold to a warm room connect it to the mains supply and let it stand for at least two hours before you insert a DVD The Receiver Player is designed for use in dry rooms If you do use it in the open please ensure that it is protected from moisture such as rain or water splashes Place the Receiver Player on a hard level surface Do not place any objects such as newspapers on the Receiver Player or any cloth or similar articles underneath it Do not place the Receiver Player close to heating units or in direct sunlight as this will impair cooling Do not insert foreign objects in the air vents or the disc compartment Never open the Receiver Player casing under any circumstances The TON TTT manufacturer accepts no liability for damage resulting from improper handling Do not place any vessels such as vases on the Receiver Player as they may spill liquid thus presenting a safety risk Thunderstorms are a danger to all electrical devices Even if the Receiver Player is switched off it can be damaged by a lightning strike to the mains Always remove the mains plug during an electrical storm If the Receiver Player is unable to scan DVDs or CDs perfectly use a standard commercial cl
11. devices while the Receiver Player is switched on Never touch the inside of the sockets and plugs of the connecting cables An electrostatic discharge can damage the Receiver Player The display elements of the Receiver Player DR WO MPI OD Gt DNR TY RADIO b S006 ER gt Playback li Pause Freeze Frame DVD DVD inserted CD CD inserted VCD VCD inserted MP3 MP3 inserted 0 00 00 Total or elapsed playing time in hours minutes and seconds DVB Receiving a Digital service TV Outputting TV signal RADIO Outputting RADIO signal VCR Outputting VCR recording REMOTE CONTROL Point the remote control at the Receiver Player and press STB button The remote control O Reo C o z d O w gt o A O Switches the Receiver Player in out of stand by mode Press and hold to invoke Low Power Standby In this mode the Receiver Player uses less than 1W of electricity Numeric keys for various inputs Switches to the next channel position step by step a TEXT GUIDE Access main menu Enter Exit teletext O Access TV Guide Calls up the Information Banner Quit the menu system Select previous menu A P SD Select various functions in the menus A SD OK Confirms selections made from the menus AV o O aO Switches between TV mode and disc mode 6 Coloured keys to Teletext information Special Disc control functions TEXT Y
12. o _ wou CE 1 Plug a standard phono cable into the DIGITAL AUDIO OUT sockets on the receiver player and into the appropriate sockets on the HiFi system Note The correct digital output format must be set on the Receiver Player For this you must observe the settings in the Adapting the digital output to a digital multi channel amplifier 37 DISC MODE USING EXTERNAL DEVICES Adapting the digital output to a digital multi channel amplifier With this you choose whether the decoder signal is processed in the unit or fed unchanged to the digital output With internal decoding there is a stereo signal PCM at the digital output MENU 1 Press to call up the main menu Sound 2 Select Sound and press OK 3 Select Extended Settings and press OK 4 Select Digital and press OK dep Back Quit Note For further operation see the following sections each one starting from Step 1 Selecting audio signal types for the digital output The audio signal type must be selected according to the connected decoder amplifier Output format 1 Select Output format and press OK DOLBY eus MPEG res e 2 Select the required output format DOLBY MPEG or PCM with Se or A and confirm with OK ge e Beck on 3 Select the audio signal type Original or PCM with V or A and then press OK to confirm
13. of the DVD player is connected to an amplification sys tem To enjoy DTS Digital Surround playback an external 5 1 channel DTS Digital Surround deco der system must be connected to the digital output S PDIF of the DVD player DTS and DTS Digital Out are registered trademarks of Digital Theater Systems Inc INFORMATION Rectifying minor problems Not every picture or sound problem is caused by a defect in your Receiver Player Impairment can also be caused by leads having been accidentally pulled out damaged DVDs CDs and worn out batteries in the remote control If the following measures do not bring about satisfactory results consult an authorised dealer Receiver Player does not respond to Press STB button on handset remote control Point the remote control directly at the Receiver Player remote control Remove all obstacles which may impair the path of the remote control signal Check or replace the remote control batteries No picture Check all connections at rear of unit Select AV Channel on TV set Distorted picture Disc mode Make sure that there are no fingerprints on the DVD CD follow the cleaning instructions on this page Disrupted Picture TV mode Check RF IN connection Ensure cables to TV are inserted correctly Replace aerial outlet plate with shielded type DVD CD cannot be played Check that the label on the DVD CD is facing upwards Clean the DVD CD Check if the DVD CD is damaged by testing it
14. press and hold down gt to switch on the function 2 Resume playback by pressing Video search You can choose from among four different speeds forwards or reverse 1 During playback select the desired playback speed with 4 or gt You can select a speed which is two four eight or twenty times faster forwards or reverse 2 Resume playback by pressing 3 You can also select super search by pressing and holding 4 amp or DP Slow motion You can choose from among four different speeds reverse 1 During playback press Il 2 Select desired slow motion speed 1 20 1 8 1 4 1 2 by pressing 9 3 Resume playback by pressing Frame by frame playback 1 During playback press Il 2 Move the freeze frame step by step backwards or forwards with A or V 3 Resume playback by pressing DISC MODE DVD VIDEO CD PLAYBACK Repeating a chapter or a DVD These functions repeat the currently running chapter or the entire DVD 1 During playback press and hold down Oe SS t GC appears on the television screen the chapter is repeated mm 2 During playback press and afterwards press it again appears on the television screen the DVD is repeated TEXT 3 To quit this function press again Repeating a selected scene A B repeat You can use this function to select the beginning and end of a scene a
15. tuned in during an Auto tune or Manual tune You can delete services that you do not want or you can add them to your Favourite List for easier selection 1 Press O select SERVICE LIST and press OK 2 Select a service using v keys RED 3 To delete the selected service press Q Once deleted you must repeat manual auto tune to view 4 To add a service to the Favourite List select the service and then press Q until YES is shown BLUE 5 To remove a service from the Favourite List press until NO is shown 6 Press OK to view the selected service Favourite List Hr All Free to View services are automatically set to favourites after a Manual or Prog eme Auto tune This list determines the order in which services are selected when using Su WO the Pr Pr keys So for the example below when watching ITV 1 pressing pote Pr would select five eh EL DN BEE To reorder the list ap 1 Press select FAVOURITE LIST and press OK 2 Select the service you wish to move with v and press The service will be highlighted in red 3 Now move the service using v to your desired location and press Q to store it in position 4 Repeat this process until the list is how you wish it 5 To exit menu press O The favourite channels are now set to suit your personal requirements To view chan
16. with another DVD CD No sound Check the audio connections Try another playback source Distorted sound from HiFi system Ensure that the audio connections have not been connected at the phono input on the amplifier Cleaning DVDs and CDs Wipe the dirty DVD CD with a cloth from the centre outwards in a straight line Do not use any solvents such as petrol thinners conventional cleaner or anti static spray for vinyl records 43 44 GRUNDIG Service GRUNDIG Deutschland Ihre regionale Kundendienst Stelle in Deutschland erreichen Sie unter Telefon 0180 523 18 52 e Telefax 0180 523 18 Aen geb hrenpflichtig GRUNDIG BELUX N V GRUNDIG NORGE A S Deltapark Weihoek 3 Unit 3G Glynitveien 25 Posthoks 234 B 1930 Zaventem N 1401 Ski 32 2 7 16 04 00 47 64 87 82 00 GRUNDIG UK LTD GRUNDIG DANMARK A S Elstree Way Borehamwood Herts WD6 1RX Lejrvej 19 GB Grofbritannien Great Britain DK 3500 V rl se 44 208 3249400 45 44 48 68 22 Technical Service GRUNDIG OY Unit 35 Woodside Park Wood Street Luoteisrinne 5 Rugby Warwickshire V21 2NP SF 02271 Espoo Gro britannien Great Britain 3 58 9 8 04 39 00 44 1 78 8 57 00 88 GRUNDIG SVENSKA AB GRUNDIG IRELAND LTD Albygatan 109 d Box 4050 2 Waverley Office Park Old Naas Road 17104 Solna EIR Dublin 12 46 8 6 29 85 30 3 53 1 4 50 97 17 GRUNDIG POLSKA SP7 0 0 GRUNDIG FRANCE S A Ul Cz stochowska 140 5 Boulevard Marcel Pourtout PL 62800 Kalisz F 92563 Rueil Ma
17. ELLOW GUIDE INFO BACK v EF a GREEN O Zooms in on scenes during playback For marking and repeating sections on DVDs and video CDs or tracks on audio CDs Selects various camera angles for certain scenes or passages on the DVD during playback Calls up the disc menu of the DVD video CD during playback Calls up the title menu for a DVD during playback Marks scenes on a DVD Freeze frame for DVDs and video CDs Pause for audio CDs Press and hold down for slow motion DVD Interrupts the currently running function Starts playback Selects the previous chapter or track during playback Selects the next chapter or track during playback Switches to reverse frame search at various speeds during playback Switches to forward frame search at various speeds during playback Switches between the original and the dubbed language during DVD playback Switches between subtitles languages CONNECTION AND PREPARATION Connecting the television and VCR TERES af Se VCR aerial Lead TV Long Aerial lead a TV S Aerial Lead Scart AD ONERE ERT EE a T Lem lead Se c cap EE i Mosen Ores sd 4X petent bot E SALAD 4 TT 2H 115 2E ond 4 957 201 3 Md DAL wor E aR E e Torney Line mae i e Wer men i Tek i Aerial lead Analogue phono cables Mains Lead Hi Fi System af e aat RF Extension
18. GRUNDIG Digital TV Receiver with built in DVD Player DUO GRP6000 11 14 19 20 21 CONTENTS Digital TV receiver with DVD player Special features of your Receiver Player Packing contents Guarantee Set up and safety Overview The front of the Receiver Player The back of the Receiver Player The display elements of the Receiver Player The remote control Connection and preparation Connecting the television Connecting the power cord Inserting batteries in the remote control TV mode setup Tuning the receiver Auto tune Manual tune TV setup Languages Connecting a 2nd TV PIN number TV mode operation TV guide Information banner Service list Favourite list Teletext Timer programming and recording Parental controls Upgrading the receiver Other information Technical details Electricity consumption Notes on simultaneous operation RF External Infrared Receiving Kit Disc Mode Adapting the DVD receiver to the television set DVD VIDEO CD playback DVD and video CD features Special DVD features Before playback 22 27 28 30 32 33 35 37 41 CONTENTS Playing back a title Calling up information Selecting titles or chapters Selecting chapters Interrupting and resuming playback Ending playback Removing the DVD video CD Additional playback functions Selecting and playing scenes MP3 CD Playback Inserting an MP3 CD Selecting tracks AUDIO CD playb
19. a way as to ensure that the maximum permissible emission value cannot be exceeded under any circumstances Caution If operating devices or methods other than those specified here are employed it may lead to dangerous exposure to emissions This device emits laser radiation Because of the danger of eye injuries the unit may only be opened or serviced by trained personnel If settings other than those specified here are employed or OTHER PROCEDURES are carried out this may lead to dangerous radiation exposure This product contains components which are covered by certain U S patents or for other reasons are considered intellectual property of the Macrovision Corporation and other proprietors Use of this protected technology must be approved by the Macrovision Company and is only permissible for private presentation at home or for other limited applications where no special permission has been granted by Macrovision Reproduction or disassembly of the device is prohibited Manufactured with permission from Dolby Laboratories The Dolby label and the double D logo D0 are trademarks of Dolby Laboratories Confidential unpublished material 1992 1997 Dolby Laboratories Inc All rights reserved When playing DTS encoded CD s amp DVD s excessive noise will be exhibited from the analog ste reo outputs To avoid possible damage to the audio system the consumer should take proper pre cautions when the analog stereo outputs
20. ack Audio CD features Before playback Audio functions Parental lock Locking and releasing the disc tray of the Receiver Player Authorising the contents of a CD Sound settings Surround sound settings Selecting surround sound effects Selecting intensity of the surround sound effects Picture settings Selecting the picture format for your television Selecting filter functions Custom settings Settings the Installation menu Setting the TV standard Language settings Using external devices Connecting to a digital multi channel amplifier Connecting to a HiFi system with digital two channel stereo sound PCM Adapting the digital output to the digital multi channel amplifier Adapting the analogue output to the HiFi system INFORMATION Technical data General instructions for laser devices Rectifying minor problems Cleaning CDs and DVDs GRUNDIG Service DIGITAL TV RECEIVER WITH BUILT IN DVD PLAYER Introduction Your DUO Combination Free to View Digital Terrestrial Television Receiver and DVD player enables you to receive the latest Digital TV Teletext and Interactive services whilst also giving you perfect Digital Video playback in studio quality It also provides superb cinema quality audio playback in stereo or with digital multi channel sound depending on the type of DVD and the hi fi system or television TESTE ies Seren DIGITAL DIGITAL AUDIO angles In addition to DVDs your player can also play vi
21. ambo No 5 Artist Lou Bega Comment come to mp3mtvhits Album Upped by Joll Year Genre CD Rom File 7 23 00 03 23 00 00 17 Fe GE D MP3 2 0 MP3 TEST 163840 ous Preparation 1 Switch on the television and select the channel for the Receiver Player 2 Ifa HiFi system is connected to the Receiver Player switch on the HiFi system and select the appropriate audio input for the Receiver Player 3 Press Ox to switch on the Receiver Player Press to switch to Disc mode On screen display no disc Inserting an MP3 CD 1 Press A on the Receiver Player Insert the MP3 CD in the disc compartment with the labelling facing upwards Press Ax A menu appears on the screen showing the content of the MP3 CD Playback 1 Use cursor keys to select the folder or track required Note A folder can contain tracks which can be called up with OK Start track playback with gt The number of the tracks and the playing time appears in the display on the DVD receiver Note Be For information about the MP3 CD press O To see the contents of the MP3 CD press O To pause playback press aile Press gt again to resume playback To select a different folder press Bii to stop playback and press lt to move up a folder Selecting a different track 1 2 INFO Press to display information menu play To select the next track press A during pl
22. and press OK 3 Select Format and press OK Qe Back Q Quit 4 Select the desired setting for 4 3 format Pan amp Scan or Letterbox with Format Y or A and press OK to confirm or select the desired setting for 16 9 widescreen format Use TV settings qe 2 Automatic Original or Cinema zoom with ze or A and press OK to confirm 5 Press O to quit the menu DISC MODE PICTURE SETTINGS 34 Picture Letterbox Extended settings Horizontal filter Crisp Back Quit Vertical filter Back Quit Anti flicker Back Quit Selecting filter functions 1 Press Dei fo call Up the main menu 2 Select Picture menu and press OK 3 Select Extended settings and press OK Note For further operation see the following sections each one starting from Step 1 Selecting the horizontal filter This setting optimises the soft focus function computer graphics and photos when playing back 1 Select Horizontal filter and press OK 2 Select the desired setting Crisp Medium or Soft with za or A and press OK to confirm Vertical filter This setting optimises the flicker reduced reproduction of freeze frames when playing back 1 Select Vertical filter and press OK 2 Select the desired setting Normal or Anti flicker with Sa or A and press OK to confirm 3
23. annel number to be tuned This menu also shows the aerial signal strength The Level bar shows GREEN for good YELLOW for poor or RED for bad signals The higher the Bit Error number the better the signal is By changing AUTO MODE to NO it is possible to change other reception parameters TV MODE 12 TY Setup m eben Tak Chie HRH r CH P Ep FT SC TUER l ADVANCED SET UP TV Setup You can choose how pictures are displayed on your TV Press O select the SETUP menu and press OK Now select TV SETUP and press OK Now choose the type of TV screen you have Use lt gt and choose 16 9 for a widescreen TV or 4 3 for a conventional one The Widescreen option chooses how widescreen images are shown on a conventional 4 3 TV Use and choose from Letterbox Centre Cutout centre action only shown or Full Frame stretched Now choose the Video Output mode Use lt gt to choose from RGB best quality pictures for TVs that support it or PAL suitable for all other TV sets Now choose how the VCR scart socket and RF outputs are to behave Use to choose from Follow TV SCART Same output as the TV socket or Don t Follow TV independent output CAUTION If you have not connected your main TV with a scart lead DO NOT select Don t Follow TV as you may lose control of your Receiver Playe
24. ata flow Audio functions Playing back a track 1 Start playback with zb Playback stops automatically at the end of the CD To pause playback press II h3 3 Press again to resume playback 28 DISC MODE AUDIO CD PLAYBACK Selecting a different track 1 To select the next track press A during playback 2 Return to the beginning of the track by pressing V once 3 To select previous track press v twice 4 To select a track directly enter the one or two digit number of the track with 1 O and press OK to confirm Interrupting and resuming playback The playback of a CD can be interrupted at any point and then resumed from the same place 1 Interrupt playback by pressing M once only 2 Resume playback at the same point by pressing gt Ending playback Playback of the CD stops automatically at the end of the last track You can stop playback at any point by pressing Bi twice Repeating a title or an audio CD These functions repeat the track currently being played or the entire audio CD 1 Press and hold down during playback t9 T appears on the television screen the track is repeated 2 During playback press and afterwards press again 9 appears on the television screen the audio CD is repeated TEXT 3 To quit this function press again 29 DISC MODE PARENTAL LOCK With the parental lock you ca
25. ayback 3 To select the previous track press v during playback Ending playback End playback by pressing Bi Removing an MP3 CD Press amp on the Receiver Player to open the disc tray 27 pisc MODE AUDIO CD PLAYBACK Audio CD features An audio CD is identified by this logo COMPACT Audio CDs contain only music recordings They can be played in the norma manner on a HiFi system DIGITAL AUDIO Before playback Preparation 1 Switch on the television and select the channel for the Receiver Player With this you can see the Receiver Player displays 2 If a HiFi system is connected to the Receiver Player switch on the HiFi system and select the appropriate audio input for the Receiver Player 3 Press O to switch on the Receiver Player Press to switch to Disc mode Display on the Receiver Player and television no disc Inserting an audio CD NEN 1 Press A on the Receiver Player The disc tray opens 2 Insert the audio CD in the disc tray with the labelling facing upwards 3 Press Ax The CD is loaded The receiver player displays the number of tracks and the total playing time of the CD Calling up the info line 1 Press OK to call up the info line The info line is displayed Here you find information about the CD including the number of tracks the playing time of the tracks the playing time remaining the audio system and the d
26. cable Using aerial RF cables 1 Connect the cable of your TV aerial to the Aerial In socket on the Receiver Player 2 Connect the short aerial from the Loop Through socket to the RF IN socket both on the Receiver Player 3 Connect the long aerial lead from the RF Out 1 socket to your TV or VCR Aerial IN using SCART cables 1 Plug the standard SCART cable supplied into the TV scart socket on the Receiver Player and the appropriate socket for RGB reproduction on the TV set See TV user guide for details on this 2 Plug a standard SCART cable not supplied into the VCR scart socket on the Receiver Player and the TV socket on the VCR 3 f required connect the other devices as shown in the diagram above A f you wish to connect the Receiver Player to your HiFi system for improved sound plug standard phono cables into the AUDIO OUT L R sockets and into the appropriate sockets on your HiFi system Using a Y C cable S Video and phono cables 1 Plug a standard Y C cable into the S VIDEO socket on the Receiver Player and into the appropriate socket S VIDEO IN on the television 2 Plug standard phono AV cables into the AUDIO OUT L R sockets on the Receiver Player and the appropriate sockets AUDIO IN on the television Note As this product is a combination product this manual will deal with the two halves of the product separately To switch between the two modes TV mode and Disc m
27. ch apply in your area TV MODE TUNING THE RECEIVER LO 9 Start up Once the mains has been connected to the receiver the receiver will take up to fifteen seconds to perform system checks during which the Receiver Player will not respond to any remote control or button presses The Receiver Player cannot be brought out of standby until these checks are completed Auto tune Once the Receiver Player has been connected to the aerial and television it can now be tuned in 1 Press D on the handset to turn the receiver on SE Merhigbk Senn EN UU 2 Press Alarm Tara Check For Downed 3 Select SETUP with A are and press OK MM u Tex bird cn 4 Select AUTO TUNE with A v and press OK 5 Press OK to select REPLACE EXISTING SERVICES Now wait while the receiver searches for all the available services this may take a few minutes The receiver will place the services in numerical order 6 Press OK or oO to exit the menu Alternatively see later in the guide how to sort your Service List As new services become available upgrade the SERVICE LIST by selecting the ADD NEW SERVICES option or when major changes occur use REPLACE EXISTING SERVICES option Manual tune This allows an advanced user to manually tune services 1 Select MANUAL TUNE from the SETUP menu and press OK 2 Now enter the ch
28. deo audio and MP3 CDs Your Receiver Player is suitable for DVDs with regional code 2 056 DIGITAL VIDEO eits The availability of Digital services in your area are dependent on the transmitters Broadcasting available to your receiving aerial and the configuration of your existing reception equipment If you wish to confirm the coverage in your area by postcode please contact your retailer or visit the following recognised website for more information www freeview co uk Packing contents 1 DUO 2 2 batteries 1 5 V AA 3 Remote control 4 Operating manual 5 Power cord 6 Scart lead 7 RF cables 1 long 1 short Guarantee We wish to point out explicitly that only operating software authorized by GRUNDIG is permissible for the Receiver Player You can obtain this software from your dealer or in the near future from the Grundig Websites www grundig com or www grundig de Any instance of operating software from a dubious Internet source being loaded into the device will impair functioning and also due to unauthorized intervention invalidate any claims under the guarantee As a rule GRUNDIG declines to refund any costs resulting in such cases Any repair costs thus due even those occurring within the guarantee period are to be paid by the customer SET UP AND SAFETY Please note the following points when setting up the Receiver Player This Receiver Player set is designed to play video
29. e press TE ME DIL rac Move up and down the channel listings using A v keys you can move a page at a time by using Pr Pr keys Find out what s on NOW or NEXT using keys Press OK to view the selected channel When in the NEXT menu you can set a reminder for a program you wish to view later Select the program you wish to view and press Oo REM appears alongside the program A prompt will appear on screen when the program is about to start press OK to select the program or O to cancel If you are playing a disc at the time the reminder occurs playback will stop and the Receiver Player will switch to TV mode If you choose not to view the chosen program press and the disc playback will resume Information banner JT ny To view information about the program you are currently viewing press the oS mE reet H ei CH button BEC OME j fo a ek el While one press shows a small amount of information a second press shows more details about the current program While the information banner is on display you can view details for the next program Do this by pressing gt HETI Ke wee You can also view details for other channels Search through the listings using the A v keys Press the button again to remove the banner 14 TV MODE LISTS AND INTERACTIVE SERVICES Service List This list contains all the services that were
30. eaning CD to clean the laser optics Other cleaning methods may damage the laser optics Always keep the disc compartment closed to prevent dust from collecting on the laser optics This Receiver Player is designed to the highest technological and environmental standards Only ecologically compatible high quality materials have been used The batteries included are free of mercury and cadmium The range of materials used has been deliberately restricted and all the larger plastic parts have been labelled This Receiver Player is easily dissassembled to make servicing easier and optimise recycling OVERVIEW The front of the Receiver Player GRUNDIG DVD m INFO O KA On D O 2 DIGITAL TV RECEIVER ED O D D QS Gn LIC poey Fr Q CY OQ t pesas iac eue DV3 b Switches the Receiver Player to and from stand by mode The receiver will always come on in TV mode at switch on Switching the Receiver Player off does not mean it is disconnected from the mains Starts playback and switches to Disc Playback mode Press and hold down 2 seconds to switch the video strobe function on E Press once to activate the RESUME function Press twice to switch to STOP mode I Opens and closes the disc compartment and switch to DVD Playback mode Stand by indicator e gt
31. ed in the TIMER PROGRAMMING menu and press a e QUIT QUIT P Cancel an event at any time by pressing O Press O again to confirm TV MODE PARENTAL CONTROLS Parental Control Parental Comirol CoaraoccgETp Chee Pr Lack Urdech Garskces Leck Uintcek Services Proj Hace leg KW o7 Ok TALC E EISES EENICHIOONS ELEME 710 Locked Channel Feuer ae ee MH You can use PARENTAL CONTROL to create viewing restrictions on your receiver First create your own Personal Identification Number PIN as shown in the Advanced Setup section of this guide You can now create censorship levels or Lock out channels completely Press select PARENTAL CONTROL from the SETUP menu and press OK Now enter your PIN The menu will appear Censorship If the censorship level does not match the censorship rating of the program access will be denied the user is prompted for the PIN before access is granted Press gt to set the censorship level to NO BLOCK AGE 5 AGE 10 AGE 15 AGE 18 TOTAL BLOCK Lock services From the PARENTAL CONTROL menu select LOCK UNLOCK SERVICES and press OK To Lock Unlock services scroll through the list of services with A yv and Lock Unlock the highlighted service with OK QUIT To exit menu press O To view a locked channel the PIN must be entered Once entered
32. h DVDs contain information which identifies these scenes providing them with ratings from 1 to 8 You can select one of the ratings and thereby authorise alternative scenes for playback 2 Press O a to call up the main menu Select Child lock and press OK Enter your PIN with the number keys The Child lock menu is displayed the parental lock status On or Off is shown Select Content control with OK Select Country with OK Select the country with v or A and confirm with OK Select Access level and press OK Select the desired rating from 1 to 8 using Y or A and confirm with OK Press 6 to quit the menu 31 pisc MODE SOUND SETTINGS VVVB Surround sound settings You can select different 3D surround sound effects including virtual Dolby surround sound Dolby virtual surround is a process which appears to provide sound all around the listener via only two loudspeakers Note You can select these settings if you have connected analogue two channel stereo sound to your HiFi system Selecting surround sound effects MENU 1 Press to call up the main menu Effects 2 Select Sound and press OK Acti LC NNNM 3 Select Surround Sound and press OK Dramas 4 Select the Effects and press OK 5 Select the desired surround sound setting Action Drama Theatre Virtual Dolby
33. he language of the DVD menus IF a DVD has menus in several languages you an select the language of your choice 1 Select Menu language and press OK 2 Select the desired language for the DVD menus using v or A and press OK to confirm QUIT 3 Press to switch off the menu DISC MODE USING EXTERNAL DEVICES Connecting to a digital multi channel amplifier The digital multi channel sound of a DVD can best be decoded and played with a multi channel audio video amplifier Dolby digital decoder or DTS DIGITAL AUDIO INPUT 08 AUDIO QUT O DIGITAL REMOVE COVERS D LIVE PARTS C 5 220 240 V 100P 50 60 Hz 25 W EE C THROUGH max BEAB l MADE IN U K CE Approved T 1 Plug a standard phono cable into the DIGITAL AUDIO OUT socket of the Receiver Player and into the appropriate socket on the digital multi channel amplifier Manufactured under license from Dolby Laboratories Licensing Corporation Dolby Dolby Pro Logic AC 3 and the double D symbol DIE are trademarks of the Dolby Laboratories Licensing Corporation Copyright 1992 Dolby Laboratories Inc All rights reserved Connecting to a HiFi system with digital rwo channel stereo sound PCM DIGITAL AUDIO INPUT C 2 T 220240 V Loop 50 60 Hz 25 W RFOUT 2 an WI BEAB
34. iver Player 2 Ifa HiFi system is connected to the Receiver Player switch on the HiFi system and select the appropriate audio input for the Receiver Player 3 Press D to switch on the Receiver Player It will turn on in TV mode Press C to switch to Disc mode Note When the parental lock is activated the zs fie display will appear You must deactivate this lock See the chapters on locking and releasing the disc compartment of the DVD receiver 21 DISC MODE DVD VIDEO CD PLAYBACK Povo ert es m masss lonza EXXCN EE EO o 22 Inserting a DVD video CD Press on the Receiver Player The disc tray opens and the player will switch to Disc mode if currently in TV mode Insert the desired DVD video CD in the disc tray with the label facing upwards Press A Receiver Player display DVD or VCD and the elapsed playing time of the DVD or Video CD Playback starts automatically Note If the DVD video CD has not been authorised the rating must be changed See the chapter on the parental lock If the amp symbol appears on the television screen then the selected function is not possible with this DVD video CD Playing back a title After the disc compartment closes and the DVD is scanned playback starts automatically To pause playback freeze frame press Ba Press gt again to resume playback End playback by pressing Bi Note
35. l 1 Select the desired chapter using 1 O and confirm with OK Playback begins with the chapter selected Note Incorrect entries can be deleted by pressing Step by step 1 To select the next chapter press A during playback 2 Return to the beginning of the chapter by pressing v once 3 To select the previous chapter press V twice Playback begins with the chapter selected Interrupting and resuming playback The playback of a DVD video CD can be interrupted at any point and then resumed from the same place 1 Interrupt playback by pressing M once only 2 Resume playback at the same point by pressing gt Ending playback Playback of a DVD or video CD automatically stops at the end of a title You can stop playback at any point by pressing Sa twice Removing the DVD video CD 1 Press A on the Receiver Player to open the disc tray 23 DISC MODE DVD VIDEO CD PLAYBACK 24 u Additional playback functions Note The sound is muted with the frame search slow motion and freeze frame functions Some functions cannot be selected This depends on the DVD video CD being used Video strobe With this effect individual video frames of the DVD are shown on the screen after each other in groups of nine During this function which can be used to analyse the pictures all the picture movement functions can be selected 1 During playback
36. le longer to switch on It will also interrupt the aerial signal making analogue TV viewing or recording impossible If you don t press a key on the handset or the Receiver Player within 24 hours then the unit will automatically switch to this low power standby mode Notes on simultaneous operation The Receiver Player will always switch on in TV mode To switch to Disc y y mode press Ca A or The SVHS output will always provide a signal in TV mode but must be correctly set up for Disc mode See Selecting the video output socket in the Disc mode section of the user manual The aspect ratio 4 3 or 16 9 of the signal is stored for TV mode and Disc mode separately so the settings must be adjusted accordingly The TV program reminder will occur in TV mode or Disc Mode If you choose to watch your chosen TV program when in Disc Mode the Receiver Player will automatically switch to TV Mode and Stop Disc playback If you choose cancel the Disc playback will resume When a timer event is set the 2nd infra red controller is disabled to prevent interruption Optional RF External Infrared Receiver kit 1 Connect the receiver adapter into the aerial socket of your 2nd TV and then connect the aerial extension lead from the RF Out2 socket on the Receiver Player to the adapter Place the Infrared Receiver on top of the TV or somewhere in view Follow the steps in the Advanced setup section of this book
37. lmaison Cedex 48 62 7 66 77 70 33 1 41 39 26 26 GRUNDIG AUSTRIA Ges m b H GRUNDIG SCHWEIZ AG Breitenfurter Stra e 43 45 Steinacker Stra e 28 A 1120 Wien CH 8302 Kloten 43 1 81 11 70 41 1 8 15 81 11 GRUNDIG NEDERLAND B V GRUNDIG PORTUGUESA Gebouw Amstelveste Comercio de Artigos Electr nicos Lda Joan Muyskenweg 22 Rua Bento de Jesus Caraca 17 NL 1096 CJ Amsterdam P 1495 Cruz Quebrada Lisboa 31 20 5 68 15 68 3 51 1 4 19 75 70 GRUNDIG ITALIANA S P A GRUNDIG ESPANA S A Via DR Trener 8 Solson s 2 planta baja B3 1 38100 Trento Edificio Muntadas Mas Blau 39 4 61 89 31 11 E 08820 H Prat De Llobregat Barcelona 34 93 4 79 92 00 NOTES NOTES Grundig AG Beuthener Str 41 e D 90471 N rnberg e hitp www grundig com 267109417002
38. n Lock the disc tray of the Receiver Player Block scenes which are not appropriate for children from DVDs or video CDs or select alternative scenes Locking and releasing the disc tray of the Receiver Player Locking the disc tray of the Receiver Player 30 Player Menu T Sound gt 3 dep e Back ou Child Lock 4 Player lock Off cep Back ou 6 Press to call up the main menu Select Child lock and press OK Enter your PIN with the number keys Default is 1234 see TV mode ADVANCED SET UP section for details on how to change The Child lock menu is displayed the parental lock status On or Off is shown Select Player lock and press OK Lock the Receiver Player with A or v On and confirm with OK Press O to quit the menu Note The button on the Receiver Player is locked and sta a is displayed each time it is pushed A disc in the Receiver Player can be played Releasing the disc tray of the Receiver Player Player Lock Off ged Back Quit 1 To release the disc tray repeat steps 2 to 5 above select the Off display with A or v and confirm with OK DISC MODE PARENTAL LOCK Child Lock Player lock Off Content control Back Q Quit Country Be None Back Quit Authorising the contents of a DVD Films on DVD may be wholly or partially unsuitable for children Suc
39. nd press OK to confirm 3 Press to quit the menu Q q INFORMATION wX O v WLLU G O L O1 Technical data This product fulfils the European directives 89 336 EEC 73 23 EEC and 93 68 EEC This device conforms to the safety regulation DIN EN 60065 VDE 0860 and therefore the international safety regulation IEC 60065 You may not open the Receiver Player The manufacturer accepts no liability for damage resulting from improper handling Mains voltage 220 240V 50 60 Hz Power consumption Operating approx 24W Low power stand by 1W Ambient temperature 10 C to 35 C Playback standard PAL 50 Hz 625 lines NTSC 60 Hz 525 lines Playback system DVD video video CD S video CD audio CD CD R CD RW Laser Semiconductor laser Wavelength 650 nm DVD Wavelength 780 nm CD Audio format Digital MPEG2 Dolby Digital PCM DTS Analogue Stereo sound Dolby Pro Logic Audio Signal Analogue DVD 48 96 kHz 4Hz 22 44 kHz Video CD 44 1 kHz 4Hz 20 kHz Audio CD 44 1 kHz 4Hz 20 kHz Signal to noise ratio at 1 kHz 90 dB Sound volume at 1 kHz 90 dB Video Signal to noise 73 dB Video jitter Ins Dimensions and weight Dimensions W x H x L 360 x 73 x 24 6 mm Weight 2 4 kg 41 42 CLASS 1 LASER PRODUCT INFORMATION General instructions for laser devices Your system is a CLASS 1 LASER PRODUCT This means that the laser is designed in such
40. nd then play it over and over TEXT 1 During playback mark the beginning of the scene by briefly pressing CD A gt A appears on the television screen DE 2 To mark the end of the scene press again briefly t A B appears on the television screen the marked scene is repeated continuously TEXT 3 To quit this function press again Selecting the camera angle for particular scenes or passages Many DVDs contain scenes or passages which were filmed several times from different camera angles You can choose from among these different angles If the DVD offers this function P5 1 4 appears on the television screen in the info line YELLOW 1 During playback press to select the camera angle function The camera angle Eh 2 4 appears in the display 2 of 4 in this example X2 2 Select a different camera angle by pressing O Enlarging the picture Zoom 1 During playback or pause press O Display A X2 the Receiver Player enlarges a section of the screen Pressing again selects X4 X8 or X16 zoom 2 You can move the screen section by pressing A v lt or RED 3 To return to normal picture size press again 25 DISC MODE DVD VIDEO CD PLAYBACK BE es MEN 2 022 3 DO 51 ent na RON DVD Jor 2 33 145 01 35 55 00 26 28 rn 2 en13 OO 51 SEA in 3 EXT on
41. nels that are not selected as favourites use TV Guide Service List or enter the channel number directly via the remote control 0 9 Teletext and interactive services If your chosen channel has Teletext MHEG features use Oo to access them To return to normal viewing press Oe again Some services offer interactive features details of these and how to use them will appear on screen as they occur 15 TV MODE 16 TIMER PROGRAMMING AND RECORDING kim Fap Em To record an analogue channel ensure that the aerial connections to your VCR are as shown in the connection diagram and use the VCR as normal To record a digital channel connect the receiver directly to your VCR via the VCR scart socket on the rear of the receiver see connection diagram Please consult your VCR user manual for details on recording via AV or AUX inputs The TIMER PROGRAMMING function enables the receiver to Automatically switch to your pre selected channels at pre selected times Start Auto Record on the VCR where the VCR supports scart automatic recording function see your VCR manual for details on this NOTE The system may not accept a start time less than 5 minutes ahead of the current clock time displayed in the menu l Press select TIMER PROGRAMMING and press OK 2 Using v select a free event or select an event you wish to alter and press OK 3 Using selec
42. ode press the s Ce key If the Receiver Player is connected via the S VIDEO socket before you can use Disc mode you must carry out the setting described in Selecting the video output socket in the Disc section of this book 10 CONNECTION AND PREPARATION Connecting the power cord 1 Plug the power cord supplied into the 220 240V lt socket on the back of the Receiver Player Insert the power cord plug into the socket Caution The only way to disconnect the Receiver Player from the mains supply is to pull the plug Inserting batteries in the remote control Open the battery compartment by pressing the snap catch and remove the lid When inserting the batteries mignon type for example LR 6 or AA 2 x 1 5V observe the polarity marked on the battery compartment Point the remote control at the Receiver Player and press the STB button The TV key has no effect for this product If pressed accidentally press STB again to restore operation of the handset Note If the Receiver Player no longer reacts properly to remote control commands the batteries may be flat Always remove flat batteries No liability is accepted for damage resulting from leaking batteries Environmental note Batteries including those which are heavy metal free may not be disposed of with household waste Please dispose of used batteries in an environmentally sound manner Find out about the legal regulations whi
43. on 2nd TV switched OFF 4 Now choose if you wish to enable the External IR for control from a 2nd room Use to select ON or OFF 5 You can adjust the channel of the RF modulator to avoid any interference from other TV channels Choose a channel between 21 and 69 using 6 Choose the output standard for the RF modulator Use lt gt to choose between PAL I for the UK or PAL G for the rest of Europe 7 To aid RF tuning the Receiver Player has a built in Test Pattern Use to turn it ON or OFF The test card is two vertical white bars on a black background PIN number You can choose a PIN Personal Identification Number for use with parental controls The receiver was originally programmed with 1234 It is recommended that you change this for your own number l1 Press O select SETUP menu and press OK 2 Select PARENTAL CONTROL lt and press OK 3 Now enter the current PIN 1234 if this is your first change 4 Select CHANGE PIN and press OK 5 Use 0 9 to enter a new PIN 6 Use 0 9 to confirm new PIN When confirmed this number is now stored KEEP THIS NUMBER SAFE QUIT 7 To exit menu press 13 TVMODE PROGRAM INFORMATION TV Guide CEE The TV guide shows details of programs of programs whilst allowing you to watch a smaller picture of the selected service To access the guid
44. r Should this happen accidentally turn off the power to the Receiver Player and switch on again Then switch the VCR scart back to Follow TV scart QUIT To exit menu press O Languages You can choose your desired languages for Sound Subtitles and Interactive data Services where more than just English is being transmitted Press select the SETUP menu and press OK Select LANGUAGES and press OK Select Subtitles Data Services or Audio using Use to choose the desired language or Off to suppress Subtitles QUIT To exit menu press TV MODE amp F Modulator Selup Wider Del Ector d AP Prose haere zt NE are Teal Farian Parenial Conmtral CrraccmsTpn IM I P Lach Urik Ser w n dh eg Change Pin De ADVANCED SET UP Connecting a 2nd TV and optional 2nd handset If you wish you can connect a second TV to the Receiver Player This allows the second TV to view either the DVD picture or the Digital TV signal from a different room If you purchase the optional External Infrared Receiver Kit you can also control the Receiver Player from the second room l Press select SETUP menu and press OK 2 Select RF Modulator Setup and press OK 3 Now choose if you wish the RF outputs enabled using to select ON picture available on 2nd TV or OFF picture
45. t playback of a DVD s video CD or video CD using the menu of the Receiver Player on the television screen Some of the Receiver Player s functions such as video strobe or slow motion can not be selected when playing back a video CD This depends on the video CD Special DVD features DVDs have a title menu which provides an overview of the titles available and the passages they contain Some of the Receiver Player s functions such as slow motion freeze frame and auto play can also be controlled by the DVD itself It is therefore possible that the freeze frame function for example cannot be selected during certain scenes Many DVDs have audio tracks recorded in up to eight languages This enables you to select the language you prefer Many DVDs are recorded by the manufacturer with subtitles in several languages You can select subtitle superimposition from up to 32 different languages Since films are released in different parts of the world at different times all receiver players world wide are given a regional code Your Receiver Player has been given region code 2 DVDs can also be given a supplementary regional code If you insert a DVD with different code to that of the Receiver Player a reference to the regional code appears on the television screen The Receiver Player will not be able to play back the DVD Before playback Preparation 1 Switch on the television and if necessary select the channel for the Rece
46. t the program you wish to record or use 0 9 to enter the number directly e g 003 4 Press v to select the date and enter the date directly using 0 9 or use lt gt to choose 5 Press v to select the time and enter the start time directly using 0 9 or use to choose 6 Press v to select the duration and enter the length of the program using 0 9 or use to choose 7 Press v to select repeat Press gt to choose from WEEKLY DAILY MON FRI MON SAT or NO 8 Press v to select subtitles Press to choose YES or NO 9 When the details are correct press OK to store them UIT A Q 10 To exit menu press O If a mistake has been made during DETAIL ENTRY an error message will be displayed at the bottom of the screen For instance in the event of 2 programmes being entered with similar start times then an EVENT CLASH error message will be displayed If any errors are found during this stage the system will not allow any further progress When the Timer Event has been activated the VCR light in the display will be lit for the duration of the event A suitably equipped VCR will record automatically during this time Please note that unless your VCR supports automatic scart recording YOU MUST ALSO SET THE VCR TIMER In order to delete an entry you no longer need position the cursor over the entry to be remov
47. to configure the Receiver Player to work with the 2nd handset DISC MODE OPERATION Adapting Disc mode to the television set Selecting the screen format of your television set TV format If your television has a 16 9 screen format then select the 16 9 setting These default settings also have an influence on the settings in the Picture menu item On a conventional television set with a 4 3 screen format the 4 3 setting 1 Press to call up the main menu Qe Back Quit 2 Select the Installation menu and press OK 3 Select the TV format line and press OK 4 Select the screen format required 4 3 or 16 9 wide screen and confirm with OK Selecting the video output socket RGB or S Video Video output 1 Select Video output and press OK 2 Select the desired video output RGB for TV SCART socket or S Video for S VIDEO OUT socket with v or A and confirm with OK QUIT e Beck eos 3 Press to quit the menu 20 Disc MODE DVD VIDEO CD PLAYBACK COMPACT aise DVD and video CD features You can recognise DVDs s video CDs and video CDs by the logo on the label Depending on the contents of the DVD s video CD or video CD films video clips etc they may carry one or more titles Each title may contain one or more chapters Titles and chapters can be selected easily and conveniently You can control and direc
48. tting the digital output level With this setting the output level can be adapted to the volume of other external SOU nd SOUFCES 2 Select Output level and press OK Change the output level from OdB to 20 dB with v or A or with lt and gt in 10 steps and press OK to confirm QUIT Press to quit the menu 39 DISC MODE USING EXTERNAL DEVICES 40 Extended settings Qe Back Quit Analogue Output level 0 dB A ep Back oui Downmix mode Stereo Surround sound OE Surround comp A sp Back Quit Adapting the analogue output to the HiFi system With this you set the output level of the audio signal and the audio operation type stereo surround or Dolby Surround Composite 1 Press to call up the main menu 2 Select Sound and press OK 3 Select Extended setting and press OK 4 Select Analog and press OK Note For further operation see the following sections each one starting from Step 1 Setting the output level 1 Select Output level and press OK 2 Change the output level step by step from OdB to 20 dB with v or A or with lt and in increments of 10 and press OK to confirm Selecting the audio mode 1 Select Downmix mode and press OK 2 Select the desired mode Stereo or Surround Sounds or OO Surround Comp with v or A a
Download Pdf Manuals
Related Search