WIRELESS ALARM MONITORING User Manual V1.2
Contents
1. Disarm icon on the upper right side of the page The device would instantly start Arm Disarm operation when it receives command Note When log on the service platform via IMEI number in the first time the system would automatically allot an account for log on use later 6 2 5 Timing Arm Disarm If you don t need to monitor for 24 hours you could send SMS command to the device from the SOS phone to set arming time period SMS command for opening timing arm Time on SMS command for closing timing arm Time off SMS command for setting time period TIME PERIOD1 PERIOD2 PERIOD3 Format of Time period HH MM HH MM Example of SMS command TIME 00 00 08 00 set the first time period TIME 00 00 08 00 12 00 13 00 set the first and second time period 00 00 00 00 means null time period When setting succeeds the SMS would reply contents including arming status timing arm status arming time period current time and SOS number Note 1 The device would synchronize time once each day automatically with the server via GPRS thus manually setting time is not needed 2 When entering arming time period the device would automatically enter arming status from disarming status before 6 3 Check device settings by SMS The preset SOS numbers can send SMS command SET to the device to check the settings of it The replied message format as below SOS1 13500000001 The first SOS number is set SOS2 1352. Reset User with SOS number phone can send RESET to the device which would reply The system would restart in 30 seconds This command is used when the device is operating abnormally 6 13 5 Restore to factory setting User with SOS number phone can send FACTORY to the device which would reply It succeeds The system would restart in 30 seconds This command is used when the device is operating abnormally due to parameter change 6 13 6 Set photo resolution User with SOS number phone can send SIZE 0 or SIZE 1 to the device to set camera resolution 1 means the camera resolution is 640x480 0 means the camera resolution 1s 320x240 Note 1 With 640x480 resolutions the camera would take only two pictures when infrared alarm is activated The uploading time is relatively slow 2 With 320x240 resolutions the camera would take three pictures when infrared alarm is activated 7 Appendix 7 1 Battery safety Please use the battery provided by the manufacturer of the device Any use of other accessories would lead to void warranty service The terminal manufacturer is not liable for any damage resulted from using accessories from other channels New battery should be fully charged 12 hours and discharged for two or three times to achieve the best performance Battery can be charged and discharged for hundreds of times and finally get useless When calling time and standby time
3. once to enter delay arming status with the yellow LED indicator flashing After 5 minutes it enter arming status with the yellow LED indicator continually lighting If the device is in arm status toggle the ARM switch once to enter disarming status with the yellow LED indicator off Arm Disarm by SMS Arm by SMS Send SMS command On to the device from the SOS phone If arm setting succeeds or it s in arming status SMS is replied as Arm setting success Disarm by SMS Send SMS command OFF to the device from the SOS phone If disarm setting succeeds or it s in disarming status SMS 1s replied as Disarm setting success Arm Disarm by dialing When the device is in disarming status dial the device number from SOS phone and hang up in 10 seconds When receiving the call the device would enter arming status automatically and reply SMS Remote arm setting success if the SOS phone doesn t not hang up in 10 seconds the device would enter voice monitoring status When the device is in arming status dial the device number from SOS phone and hang up in 10 seconds When receiving the call the device would enter disarming status automatically and reply SMS Remote disarm setting success if the SOS phone doesn t not hang up in 10 seconds the alarm would enter voice monitoring status Arm Disarm by service platform Log in the service platform via IMEI number or account Click the Arm
4. that the SIM card has opened Caller ID and MMS function Insert and remove SD card Remove battery and other external power supplies Insert and slide the SIM card with the metal part facing down by following below arrow direction at battery slot until SIM card is completely inserted in right position To remove the SD card please turn off the device and remove external power supplies The SD card would pop up by slightly pressing Remark when inserted and removed SIM or SD card the device must be power off or the cards would be easily damaged Note Please insert SD card before use The device could not operating normally if the SD card is removed or working 5 2 Switch On Off After the battery is inserted long press the On Off key It s switched on when the red and green indicators start flashing Note If SOS number was set before the device would send message The system starts up to the SOS numbers two minutes after switching on 5 3 Installation of the device Fix the base with the bracket and keep the base rabbet upward Put the device on the base with the logo side facing forward and straightly to ensure the photos and videos are taken in right direction Then fix the bracket on the wall or other solid object An electric outlet is available around Connect power for use 5 4 Battery Charging Make sure the charger is connected with power The device could be normally used while charging Continually bright sta
5. the first phone number SOS D 2 deleting the second phone number SOS D 3 deleting the third phone number If you d like to delete several numbers at one time the message is SOS D 1 3 deleting the first and third phone number If you don t remember the phone number order the message could be SOS D phone number deleting the phone number for SOS For example SOS D 13527852360 deleting the phone number 13527852360 for SOS When SOS numbers are deleted successfully the device would send message to the relevant mobile phones Example of the message reply SOS1 13500000001 SOS2 SOS3 13500000003 The second phone number SOS2 is deleted Add Delete SOS numbers by service platform Besides SMS service platform is also available to add delete SOS numbers You can log on the service platform provided by distributors or service providers to set SOS numbers Language setting Send SMS to the device from the SOS phone LANG L Set L as 1 the setting language will be English set L as 0 the setting language will be Chinese Message reply when setting is completed a Message reply when the language 1s set as English The current language is English b Message reply when the language is set as Chinese BK EMI APN settings Send SMS command to the device from the SOS phone to set device APN a APN network name For example APN cmnet b APN network name user name user account For example A
6. would turn off automatically after working for 5 minutes They would turn on again when toggling Arm Disarm switch or short pressing the On Off key 4 Notice for use Please make sure all the accessories are complete when you open the package If any of the following is lacking please contact with your provider as soon as possible Device terminal 1 Lithium battery 1 Charger USBcable1 Bracket 1 User manual 1 This device could help resolve your worries if you are often not at home What you need to do is to install the device in the monitoring area Configured with a human body infrared sensor the device would take pictures and video recording and save it in SD card when it senses persons in your monitoring area At the same time your mobile phone could receive alarm MMS from the device You can also check the pictures on Internet service platform Please refer to the following chapters for further using method 5 Operation manual 5 1 Installation of SIM card and SD card Insert and remove SIM card Turn off the device remove battery and other external power supplies Insert and slide the SIM card correctly by following the arrow direction To remove the SIM card please turn off the terminal remove battery and other external power supplies hold the notch of SIM card and lift it slightly up to take card out Remark 1 Please use SIM card with GSM network 2 Please confirm that the SIM card has opened GPRS service 3 Please confirm
7. 00000002 The second SOS number is set SOS3 13500000003 The third SOS number is set Timing arm status close open Arming time period 00 00 08 00 12 00 13 00 18 00 20 00 Arming time periods are set Current time is 2011 6 1 16 57 29 current time IMEI 1s xxxxxxxxxxxxxxxx IMEI number of the device Account xxxxxx user account of the platform MMS alarm On Off MMS alarm status Picture resolution 320x240 or 640x480 6 4 MMS alarm On Off MMS alarm On Send SMS command MMSON to the device from the SOS phone When MMS alarm is On the device would reply SMS of the MMS alarm status Example of the SMS MMS alarm On MMS alarm Off Send SMS command MMSOFF to the device from the SOS phone When MMS alarm is Off the device would reply SMS of the MMS alarm status Example of the SMS MMS alarm Off 6 5 Photos taking 6 5 1 Via SMS Send SMS command PHOTO or 333 to the device from the SOS phone If the device is on it would take photos and send MMS of these photos to the above SOS phone 6 5 2 Via service platform Log on the service platform and click the icon Take photos on the upper right side of the page If the device is on it would take photos and send these pictures to the platform Note 1 All letters and characters of SMS command should be input in English No blank space is permitted and the format should be completed 2 No case sensitive 3 Only preset SOS numbers can make remote a
8. PN cmnet user 123456 When setting succeeds SMS is replied as OK Sever command setting Send SMS command to the device from the SOS phone in the following two ways a DNS SERVER mode 1 domain name port O For example SERVER 1 www ydpat com 8011 0 b IP SERVER module0 IP port 0 For example SERVER 0 211 154 135 113 8011 0 Note Currently only TCP protocol is supported UDP protocol is not supported MMS setting Send SMS command to the device from the SOS phone in the following two ways a MMS MMS center address IP port Access point name APN user name user account type of connection 0 means HTTP 1means WAP For example MMS http kks com 211 154 135 113 8011 cmwap yang 3333 1 b MMS MMS center address IP Port Access point name APN For example MMS http kks com 211 154 135 113 8011 cmwap Devices will automatic restart after setting Query parameter setting Query the current GPRS and MMS parameters Send SMS command GPRSSET to the device from the SOS phone Example of the message replied GPRS APN cmnet GPRS name GPRS pwd MMS URL MMS IP 211 154 135 113 MMS port 8011 MMA APN cmwap MMS name MMS pwd MMS type SERVICE SET url www ydpat com mod addr port protol type 6 2 Arm Disarm 6 2 1 6 2 2 6 2 3 6 2 4 Arm Disarm by toggling the switch Toggle the Arm Disarm switch If the device is in disarm status toggle the ARM switch
9. WIRELESS ALARM MONITORING User Manual V1 2 Please read this user manual fully before attempting installation Pictures are for indication and illustration purposes only 1 Accessories Please make sure that all accessories are complete Pictures are for indication and illustration purposes only 2 Appearance and keys introduction Power On Off Light sensor Infrared LED light Camera Infrared sensor MiniUSB port charge port Fortifying indicator yellow GSM indicator green Power indicator red Arm switch T card port 3 Specification GSM 900 1800MHz or 850 1900MHz GPRS Class 12 Camera 30W Pixel CMOS camera T card maximum 4G Built in battery 3 7vDC 800mAh LED indicator Armed yellow GSM green Power red Built in antenna Built in GSM Dual band antenna Voltage range SvDC Dimensions 82 5 L x 44 3 W x 28 7 H Red LED Power Working status Quick flashing interval 0 1s Low battery indication Slow flashing interval Is Normal operating Continuously in bright state Battery charging Continuously in dark state Battery power loss Internal problem Yellow LED Arm Disarm Green LED GSM signal Quick flashing interval 0 1s Searching GSM Initialization Slow flashing interval 1s GSM normally on Continuously in bright state GSM conversation GPRS activation Continuously in dark state No SIM card installed No GSM signal Note All the LED indicators
10. is decreased obviously you need to change new battery Touching any metal object key in pocket would easily cause battery short circuit Do not forcibly bend and open battery Keep the battery away from water and fire Battery should be charged at room temperature If temperature is lower than 0 C or higher than 45 C the battery may not be charged 7 2 Trouble shooting If there 1s trouble during using the device please read the solution as follow or contact provider Common l Causes Solution problems The called number is not the SOS Set up SOS number l number Fail to monitor l l SIM card without caller ID display l l Active function of caller ID display function Bad installation of SIM card check SIM card installation Filth on the SIM card iron Clean it surface Fail to connect useless SIM contact internet operator network Use itin effective GSM service Beyond GSM service area offer area bad signal Try again in a better signal area Connect with power with suitable The voltage is unsuitable voltage
11. rming disarming and tacking photos 6 6 Infrared alarm Under arming status when the infrared sensor detects human body the device would take a set of photos The first photo would be sent to the specific SOS number via MMS with message content Emergency alarm and the device would record a one minute video automatically and sent the video and a set of pictures to the platform Both the photos and video would be saved in the corresponding catalogue PHOTO and VIDEO in SD card If the storage capacity is not enough the device would automatically delete the earliest photos and videos Users may check the photos and videos on the computer by connecting device with USB cable 6 7 Power cut off alarm When the electricity supply is cut off the device would send SMS Attention please Power is cut off to the SOS numbers At the meantime the device will upload power cut off alarm data and time to the server via GPRS 6 8 Low battery alarm When the device is detected with low battery it would send alarm SMS Attention Battery too low please charge to the SOS numbers At the meantime the device will upload low battery alarm data and time to the server via GPRS 6 9 Power off alarm When the battery is too low to support operation the device would send alarm SMS The system is power off which inform user of charging it timely and turn off subsequently 6 10 SD card failure alarm When the SD card is not inser
12. te of the red LED light indicates the terminal is charging Slow flashing indicates power is enough Quick flashing indicates low power and charging is needed timely The charger could continue to supply power even when the battery is charged Remark Battery charging should be operated under 0 C 40 C with chargers provided by the manufacturer Any unauthorized charger may result in danger and breach of approval and warranty terms of this device 6 Function settings 6 1 Parameter setting 6 1 1 Add or modify SOS numbers Only those SOS numbers set before are authorized to remotely control the device SOS number could be added by SMS from any mobile phone SOS A phone number 1 phone number 2 phone number 3 A means adding SOS number For example SOS A 13500000001 13500000002 13500000003 Each SOS number can be set with a specific phone number if only need to set one SOS number leave it blank if the corresponding SOS number is not needed For example SOS A 1350000000 1 The first SOS number SOS A 13500000002 The second SOS number SOS A 13500000003 The third SOS number When SOS numbers setting succeed the device would send message to the relevant mobile phones Example of the message SOS1 13500000001 SOS2 13500000002 SOS3 13500000003 Delete SOS numbers by SMS Delete by SMS from SOS phones SOS D number orderl number order2 number order3 D means deleting SOS number SOS D 1 deleting
13. ted or the inserted way is not right the device would send alarm SMS SD card detection failure please make sure that whether the card is inserted or storage space is enough to the SOS numbers When received this SMS please insert the SD card again in the right way 6 11 Check photos and videos in SD card Take off the device and charger turn it off and connect it with a computer via USB cable Photos in the catalogue PHOTO and videos in the catalogue VIDEO to view copy or delete 6 12 Voice monitoring When the specific SOS phone dials the device ringing for 10 seconds it will enter voice monitoring status At this time caller can monitor the sound in the area Note 1 The SIM card put into the device should be equipped with caller identification 2 To realize this function please set special numbers beforehand 3 If infrared alarm is activated during monitoring monitoring function would be interrupted for emergency alarm 6 13 Service platform User could log in service platform http www cootrack com to make arming disarming taking pictures function 6 13 3 Check information Instantly uploaded alarm photos could be checked in the alarm photo column on the home page Instantly uploaded power cut off alarm data and low battery information could be checked in the abnormal device column The relevant account IMEI number device status online or not arming status could be checked on the home page 6 13 4
Download Pdf Manuals
Related Search