OPERATION AND MAINTENANCE MANUAL
Contents
1. Multiva OPERATION AND MAINTENANCE MANUAL CAMBRIDGE ROLLER AS YO G DOA YOO PL LEO SOE JH 450 JH 620 Original manual 01 2015 www multiva info Multiva TRACKING THE FUTURE Contents gt ZEOREWORB 02 2 RN 1 1 Intended use of the machine 1 2 Technical specifications TS TV De tilda SAFETY INSTRUCTIONS iniiis iii MEASURES BEFORE COMMISSIONING Rus TRANSPORT Z SERVICE AND STORAGE ssc EEE ee ern C DECLARATION OF CONFORMITY maupwn 1 FOREWORD Multiva agricultural machines are manufactured in Finland The modern production technology excellent raw materials and careful manufacturing and finishing utilised in the production of the machines guarantees a high quality product We thank you for choosing and putting your trust on the Multiva Cambridge roller We hope that the product fulfils you requirements and serves you for a long time We advise you to carefully go through these instructions before commissioning the machine The inspection and maintenance activities described in these instructions are vitally important for the proper functioning of the machine and the validity of the warranty All instructions warnings and cautions must be followed without exception They are given to ensure the safety of the user and the durability of the machine These operation and maintenance instructions apply to JH 450 and JH 620 ra2. ce 5 TRANSPORT Set the machine to the transport position as follows 1 Use tractor hydraulics for turning the wheels against the ground Drive forward carefully at the same time until the side sections have turned fully to the driving direction 2 Lock the sections using the chain Ensure that the machine is sufficiently clean before transport on public roads Road transport must be done very carefully Recommended max speed is 20 25 km h 6 SERVICE AND STORAGE TIGHTEN ALL BOLTS AFTER TWO HOURS OF USE Lubricate all grease nipples once in an operating period Check the tyre pressures 4 0 bar always before the operating period Use only original spare parts EC DECLARATION OF CONFORMITY DOMETAL OY Kotim entie 1 FI 32210 Loimaa Finland hereby states that the machine in question Multiva JH450 and JH620 rollers meet the requirements of Machinery Directive 2006 42 EC The following standards were applied in the design of the machine ISO 4254 1 2013 Loimaa 23 1 2015 Dem dato Vesa M kel Kotim entie 1 FI 32210 Loimaa Finland The undersigned is also authorised to compile technical documentation for the above machines
3. g work or transport e Do not stand close to the side sections when the machine is set to the work position or to the transport position e Setting to the work position or to the transport position must be carried out on an even and stable surface e Transporting the machine on a public road must be done carefully on a sufficiently slow speed e Only use original spare parts in the maintenance of the machine e Maintenance must be carried out when the machine is on the work position on an even and stable surface 3 MEASURES BEFORE COMMISSIONING Check the tyre pressures Correct pressure is 4 0 bar kp cm2 for 340 55x16 tyres 4 FIELD USE Set the machine to the work position as follows 1 Remove a chain from rear of the roller and place it to a holder in the frame bar 2 Reverse the tractor carefully until the side wings have turned parallel with the middle section ENSURE THAT THERE IS NO ONE CLOSE TO THE MACHINE 3 Use the tractor hydraulics for turning the frame of the machine so that the rollers turn to the work position Do not keep the brakes of the tractor on 4 Set the drawbar so that both side wings and middle section will work with the same pressure The cylinder has a pilot valve which locks the drawbar to a desired position depending on the height of the tractor s hitch Use considerably slow speed especially in the turnings Speed is suitable when the pattern of the roller discs remains visible on the field surfa
4. nge Cambridge rollers 1 1 Intended use of the machine Cambridge roller is intended for compacting the soil surface layer and pressing the stones down to the surface level Use of the machine for any other purpose is prohibited 1 2 Technical specifications With standard equipment JH 450 Weight kg 1830 Working width cm 450 Transport width cm 250 Number of the sections pcs 3 Diameter of the roller discs 49 Hydraulic outputs dual acting pcs 1 Wheel size 340 55x16 Power requirement hp 60 80 Due to ongoing product development products and specifications discussed herein are subject to change 1 3 Type plate A type plate similar to the one below is attached to the machine Please write all the information from the type plate in this manual When you are dealing with the supplier of the Multiva machine or a factory representative please mention the model and serial number of the machine This is recommended to avoid delays and unnecessary misunderstandings WME Malli Modell Paino Vikt kg valmistus no Serie nr Valmistaja Tillverkare lt A Loimaa FINLAND 2 SAFETY INSTRUCTIONS These safety instructions and safety distances must without exception be followed when using the machine The machine must be configured according to this manual and this manual must be utilised in the operation and maintenance of the machine e Never allow any person to ride the machine durin
Download Pdf Manuals
Related Search