Home

40100 Remote control - Scandinavian Technology AS

image

Contents

1. DOMOSA zali EH Domotic service 1 2 3 4 for one zone This icon indicates the domotic services for a specfic zone of the house It activates deactivates the domotic service associated with the number by pressing 1 4 TI Domotic service 7 8 9 0 for the whole installation This icon indicates the domotic services for the whole installation It activates deactivates the domotic service associated with the number by pressing 7 0 PN 4 Roll up the awning Keep this key pressed to roll up the awning GA 7v Roll down the awning Keep this key pressed to roll down the awning www egiaudio com Edil DOMOS Audio y Dom tica Chapter 5 Option settings This chapter describes the transmission function backlight setting and acoustic signal activation m TRANSMISSION FUNCTION You will be able to use the EGi 40100 Remote control to transmit data to other remote control of the same model You must first connect both remote controls using a connection wire Please see Appendix B for further details and follow these steps r ar Tt 1 Keep the SETUP button pressed for 3 seconds to access to CODE JI DELETE J MACRO SETUP g T a the confirmation screen ae 2 Press each number 2 4 6 8 only once in any order 4 Ls 3 Navigate through the menu options using the A and W buttons until you find the CODE mode Press the button to confirm the transmission During the transmission the screen d
2. tica Activate Deactivate the listening function Press this key once to activate deactivate the LISTENING function of the selected zone NOTE This function must be activated in the central unit To activate this function press the key of the in wall control unit of the room to be monitored 8 Activate Deactivate the Do not disturb function Press this key once to activate deactivate the DO NOT DISTRUB function of the selected zone NOTE This function must be activated in the central unit If this function is activated you will not be able to listen to the intercom or any other system call in the room gt Door entry system O Press to open the door If your system has this function activated the intercom will be activated when receiving a call Press this key once to open the door when you receive a call O norr Press to cancel the communication through the door entry system Press the key once to finish the communication through the door entry system 60 Answer the door when you receive a call Press this key once to answer the door after receiving a call and talk to the visitor EGi Domotics DOMOTIC FUNCTIONS SOS SOS Alarm function Keep this key pressed to activate the SOS Alarm Aa Pull up the blind Keep this key pressed to pull up the blind of the selected zone Pull down the blind Keep this key pressed to pull down the blind of the selected zone www egiaudio com Audio y Domotico
3. The confirmation screen will be displayed again then confirm ET it once again UJ s Press each number 2 4 6 8 in any order once again for a definitive confirmation Check that the OK 2 icon is displayed It indicates that 2 the codes are reset to their initial state g 6 u 8 www egiaudio com ai DOMOSe Audio y Dom tica Chapter 4 EGi Audio 40100 Remote Control will allow you to control some audio and domotic functions of your DOMOS2 system at the touch of a button m GENERAL Luo DOMOS2 Audio Menu wovonc DOMOS2 Domotics Menu m AUDIO CONTROLS 43 La PROG ww Turn on off the audio of the in wall control unit Press the key once to turn off the audio of the control unit of the room If you press the key again the control unit will be turned on and you will continue listening to the program that you left NOTE This key only turns on off the audio of the control unit The other functions will not be affected Volume regulation This key turns up down the volume of the EGi sound system Keep the up down key pressed to control the volume of the audio source radio music TV etc Program selector 3 General audio programs and 1 local audio program t allows you to select any of the general or local audio programs that are available NOTE Your EGi sound system has 3 general audio programs for the whole system and 1 ocal program but only for the room in which the control unit with
4. _Aubio_J Edil DOMOS Delete codes and devices Audio y Dom tica To delete one or all 40100 Remote Control codes follow these steps A Yi an 1 Keep the DELETE button pressed for 3 seconds to access ELETE JI MACRO J SETUP to the confirmation screen 2 2 Press each number 2 4 6 8 only once in any order L4 u 8 3 Navigate through the menu options using the A and W buttons until you find the device you want to delete then press KEY to delete the codes Should you wish to delete es the TV codes from the 40100 Remote Control select first WA the TV button and then press KEY IAS The second option is BANK If you press this button you will delete all remote control codes Then press the OK button 4 Press the e button to confirm this option www egiaudio com DOMOSe zai Audio y Dom tica MACRO function The MACRO function a sequence of commands of max 60 seconds allows you to have the control of your TV and DVD at the same time by pressing only one button on the 40100 Remote Control You must create a sequence of commands specifying preference and time of execution of DVD video and TV HOW TO CREATE A MACRO A nr Tm 1 Keep the MAGRO button pressed for 3 seconds to access CODE MACRO L SETUP J to the confirmation screen 2 Press each number 2 4 6 8 only once in any order Cz The MACRO icon starts to blink U4 u 6 u 8 3 For instance select the TV to use it as our MACRO fu
5. built in tuner has been installed You are able to select different audio sources FM tuner audio equipment TV etc or each audio program Press the aroe key to select any of the 3 general audio programs and the local FM radio program provided that your control unit has a built in tuner xm Selecta preset radio station in the central unit General Local prog wy It allows you to select any of the preset radio stations of the central unit or in wall control unit local Please see FM Radio station scan Pressing the asma Key the preset radio stations of each audio program will consecutively change 1 9 Should you wish to listen to a particular preset radio station first select the program general or local in the unit with the FM tuner and then press the E key to find the desired radio station www egiaudio com DOMOS2 zai Audio y Dom tica lt lt bp FM FM BA FM Radio station scan If your control unit has a FM tuner you will be able to scan and set FM radio stations by pressing the button Press the gt gt key to scan FM radio stations The unit will scan upward through the FM frequency The in wall control unit will display the FM radio stations that are being saved The system select automatically the radio stations Activate Deactivate the timer It activates deactivates the TIMER function This function allows you to defer the turn off of the system for a specifc time Press this key once to act
6. button that has been pressed has no remote control recorded code Record the code The video VCR does not record Make sure that you hold the REG button for at least 2 seconds www egiaudio com ei DOMOS Audio y Dom tica PROBLEMS SOLUTIONS E The IR Code Learning Function does not work The battery of the other remote control has run down The learning distance must be 5 10 cm The learning function must not be done under an incandescent lamp The memory of the remote control is full If not successful contact our technical department The Macro function does not work Make sure that the commands are directly sent to the selected device The function has not been set correctly Repeat the process The remote control TV DVD etc has 2 or more functions for the same button Make sure that you assign 1 function to each button when learning the codes on the EGi 40100 Remote Control The LCD display turns off The display of the remote control automatically turns off after 90 seconds Press the display to turn the screen back on www egiaudio com DOMOS2 Audio y Domotico Notes www egiaudio com
7. the device if batteries run down m TECHNICAL SPECIFIATIONS Number of controllable devices Buttons Backlight Learning frequency Memory Batteries Power consumption Operation Operating distance m Infrared distance m LCD Display cm Dimensions cm Weight without batteries gr 8 2 pages 56 buttons for each device Blue LED 20 KHz 455 KHz Pulse up to 256 bits long 512 KB flash memory AAA Alkaline batteries x 3 LCD Off 50 uA LCD On 300 uA 30 150 mA max 8 10 8 10 5 8 xX 12 79X19X3 2 125 www egiaudio com DOMOS2 EG Audio y Domotico E Appendix B Problem solving chart PROBLEMS SOLUTIONS E The LCD does not display anything when The battery has run down Check that the touching it batteries are inserted in the correct orientation Check that the remote control displays the correct screen to control for instance the TV It will not operate over a distance of more than The remote control does not execute your 10 meters commands Point the remote control at the device to be controlled Check that there are no obstacles Check that you have correctly introduced the code for that button During the learning pocess keep the button ERROR appears during the code learning pressed until OK is displayed process The learning distance must be 5 10 cm Check that the remote controls are correctly positioned ERROR appears when using normally the The
8. DOMOS Audio y Dom tica Users Manual English 005180 Edi zgi 40100 www egiaudio com Avda Almozara 79 9 50003 ZARAGOZA Spain 9 Phone 34 976 405356 Fax 34 976 405354 e http www egiaudio com e e mail info egiaudio com Remote control Thank you for choosing the EGi DOMOS2 Universal Remote Control It will allow you to control your home appliances as well as your EGi Audio amp Domotic System Please read carefully before using the system and save this manual for future reference EGi DOMOS2 Universal Remote Control can program codes from other remote controls TV VCR DVD audio equipment etc by the learning process or selecting them on a code list EGi DOMOS2 Universal Remote Control has a LCD backlight touch screen with 56 buttons to control each device The advanced functions allow you to program up to 60 commands at the touch of a button DOMOS Audio y Dom tica CHAPTER 1 Getting started 40100 Remote control CHAPTER 2 Before use Code Learn button Manual code selection Automatic code selection CHAPTER 3 Technical specifications APPENDIX B Code learning function 9 Code learning process 9 LCD Edit mode Device buttons 10 Delete codes and devices 11 MACRO Function 12 Reset to initial codes 14 CHAPTER 4 EGi Audio EGi Domotics CHAPTER 5 Option settings 19 APPENDIX A Problem solving chart DOMOS2 zai Audio
9. d follow the steps Assign the TV2 to any of the device buttons except DOMOTICS and EGi AUDIO for instance SAT CBL Follow the same steps as in TV1 Press the TV button any time you want to control the TV1 Press the SAT CBL button any time you want to control the TV2 Please note that your remote control may not be listed as there are many manufacturers and remote control models available on the market If so please see Manual code selection amp Code learning process DOMOS2 Audio y Dom tica Automatic code selection 1 Manually turn on the device to be controlled W JSB VR 2 Select the device to be controlled TV SAT AUDIO on your LAP JA Audio J womoric Audio J 40100 Remote Control z E ee AI 3 Press CODE for 3 seconds www egiaudio com DOMOS2 Audio y Domotico 4 Press each number 2 4 6 8 only once in any order 5 Press the button to select CODE 6 Press AUTO You will listen to a beep while AUTO and OK blink 7 When the device that is being controlled turns off press any key of the remote control 8 Press lt lt or gt gt until the device you want to control turns on 9 Press the button to ensure the correct operation 10 Press DISPLAY to see the code of your device 11 Press the OK button to confirm the selection www egiaudio com Ls LY Lg ok a A lt lt gt gt 2 9 0 auto gai DOMOS Audio Dom tica Chapter 3 Zz Code learning f
10. d for 3 seconds to access to CODE _J _DELETE _MACRO J SETUP A a the confirmation screen 2 Ge 2 Press each number 2 4 6 8 only once in any order Ls _ Ls CaM 3 Navigate through the menu options using the A and W J buttons until you find the BACKLIGHT mode A LJ TET Tara Lid L LH 2 3 4 Press the lt q or buttons to set the light sensitivity LA SiG 5 Press the OK button to confirm If you do not want to save the selected light sensitivity press the EXIT button www egiaudio com DOMOS Audio y Domotico ACOUSTIC SIGNAL ACTIVATION To activate the acoustic signal follow these steps 1 Keep the SETUP button pressed for 3 seconds to access to the confirmation screen Press each number 2 4 6 8 only once in any order Navigate through the menu options using the A and W buttons until you find the BEEP mode Press the e button to activate deactivate the beep Press the EXIT button to finish www egiaudio com BO CODE _ _DELETE JU MACRO J SETUP ei Appendix A Technical specifications DOMOS Audio Dom tica m FUNCTIONS 56 buttons on the touch screen display Macro function with up to 60 sequence commands The backlight is automatically activated depending on the lighting in the room Energy saving automatic function Movement detector that automatically turns on the remote control Low battery indicator The information remains on
11. isplays the following A LJ 5 Once the transmisson has correctly finished the OK icon wu will be displayed eS If the transmission has not finished ERROR will be displayed Then go back to step 3 6 Press the EXIT button to cancel the transmission NOTE Before you start the transmission process ensure that both remote cotrols are connected to the auxiliary wire Make sure that the batteries supply the necessary energy to run the remote control www egiaudio com DOMOS2 Audio y Domotico m BACKLIGHT SETTING Learn how to activate the backlight and set the light sensor sensitivity To activate the backlight follow these steps 1 Keep the SETUP button pressed for 3 seconds to access to the confirmation screen 2 Press each number 2 4 6 8 only once in any order 3 Navigate through the menu options using the A and W buttons until you find the BACKLIGHT mode 4 Press the e button to confirm the process 5 Press a number button 1 6 1 indicates a temporal value of 10 seconds and 60 indicates a temporal value of 60 seconds It sets the time you want to have the remote control turned on after pressing a button 6 Press the OK button to confirm www egiaudio com A _CODE_ _DELETE JU MACRO J SETUP z Ls _ Ls BACKLIGHT EXI 3 BACKLIGHT 3 Ei DOMOS2 Audio y Dom tica To set the light sensor sensitivity follow these steps 1 Keep the SETUP button presse
12. ivate deactivate the TIMER function NOTE This function must be activated in the central unit Activate Deactivate the alarm clock It activates deactivates the ALARM CLOCK function This function allows you to connect the system at a specific time Press the key once to activate deactivate the ALARM GLOK function NOTE This function must be activated in the central unit INTERCOM FUNCTIONS Intercom and baby phone 1 9 EY Local intercom Local intercom with one zone of the installation Should you wish to talk to other zone press the key with the number of that zone once Get close to the in wall DOMOS2 contro unit to talk to the selected zone You will be able to talk to the other zone for a maximum of 90 before receiving an answer General call The general call function allows you to talk to all zones of the house If you press this key once you will be able to talk to all zones for no longer than 90 Once you receive an answer from other zone s you will be able to keep the conversation for 90 more and so on for conversations between 2 zones or more Activate Deactivate the baby phone monitor function Press this key once to activate deactivate the haby phone monitor function of the selected zone NOTE This function must be activated in the central unit To activate this function press the key of the in wall control unit of the room to be monitored www egiaudio com gai DOMOS Audio y Dom
13. nction Then press any of the numbers to assign this function to it Listen to 3 beep tones generated by the creation of the macro yt saree L VER JOW J If the selected number already has a MACRO function assigned UP JA AUDIO J VomorcJ AUDIO J to it the new function will overwrite the existing one A Cex CKN L J 4 You can establish when the command is executed Press any of the buttons witha command assigned to it Press DELAY Em a and then press the seconds up to 9 to delay the execution between the commands um 2 3 Che as LM 8n 9 A AI 5 Press OK to confirm or EXIT to cancel www egiaudio com Egil EXAMPLE If we assume that you want to turn on your TV in order to watch a film on DVD in 5 seconds then follow these steps to set the macro ao a fF OO N command in 5 seconds o n Press OK to confirm this macro NOTE DOMOS Audio y Dom tica Press the TV button on the 40100 Remote Control This will bring you to your TV remote control menu Press p This will turn on your TV Activate the TV VIDEO button This will put the channel to watch the DVD on your TV Press the DVD button on the 40100 Remote Control Press the button This will turn on your DVD device Press the DELAY button and then press number 5 The remote control will activate the next Press DVD Play on your remote Your DVD will start to play Should you wish to stop the sequence of macro commands press
14. ntrol blinks Press the same button on the remote control until it stops blinking Repeat the process with every blinking button and finish the copy operation NOTE If a code of your TV remote control already exists on the 40100 Remote Control CODE will be displayed on the screen during the learning process Should you wish to learn a code on any of the device buttons for instance the TV button press the TV button seconds The TV button will start blinking for at least 3 Then press the start button on the TV remote control If it has been learnt correctly the 40100 Remote Control screen will display KA LCD Edit mode Device buttons The edit mode allows you to define the touch screen so as to match it with your existing remote controls 1 Keep the remote contro button pressed for at least 3 seconds to access to the confirmation screen 2 Press each number 2 4 6 8 only once in access to the selection screen any order to 3 Press the button that you want to change on the remote control page Press repeatly to select any of the avai 4 Press KEY to display all the available icons on th Repeat step 3 until all changes are made 5 Once you have defined the screen press 0 changes If you do not want to save changes www egiaudio com able options e LCD screen K to confirm press EXIT PAGE 1 TV__J SAT CBLJ _veR_J _bvo_J _AmP_J _Aupio_J pomoric
15. s e CODE Automatic setting Your remote control must be included on the code list LEARN If your remote control is not included on the code list you must prerecord the codes manually To do so put the remotes in front of the other Manual code selection This function allows you to set your 40100 Remote Control and make it work as one of the remotes included on the attached list 1 Select the device to be programmed for instance TV 9 saricay Ver JA DW J _aup_J _Aupio_J pomoric AUDIO J 2 Press and hold the CODE button for 3 seconds to access to a Ar f the confirmation screen lt Ko Jones MACRO J SETUP J 3 Press each number 2 4 6 8 in any order Start to use the az PRE CODE function Cg u 6 Ls www egiaudio com SI J 4 Press A and W buttons to select the desired options until e you find CODE Press and access to the code page cS 5 Press the 4 digit code manually NOTES Some codes included on the list are not specific to one remote control model You must select the one that best adapt for your model If a code is not included on the Manufacturer s Code List the screen will display ERROR when introducing that code EXAMPLE Should you wish to control the two televisions that you have at home TV1 and TV2 with your 40100 Remote Control follow these steps 1 Assign the TV1 to the TV device button Please see LCD Edit Mode Device buttons to introduce the 4 codes an
16. the EXIT button Aw SAT CBLJ VCR J DVD J LAMP _J LAUDIO J DOMOTICJ AUDIO J A N CODE y 21 MACRO J SETUP E MACRO BUTTONS The screen can display the macro function buttons assigned to a particular device To do this with the TV button follow these Steps 1 Press the TV device button 2 Keep the MACRO button pressed in order to display the remote control macros For example if you select number 9 as macro button on PAGE 1of the TV then every time you press the MACRO button the screen will display the 9 macro function 3 Press the TV button again to check the macro buttons on PAGE 2 Go back to step 2 www egiaudio com DOMOSs2 zai Audio y Dom tica STOP MACRO COMMANDS To stop the sequence of macro commands press first the MAGRO button and then press the EXIT button If ERROR is displayed on the screen the sequence is stopped Reset to initial codes This option allows you to reset to initial codes and macros The codes and macros that you programmed will be deleted Should you wish to reset your 40100 Remote Control to its initial state follow these steps 1 Keep the DELETE button pressed for 3 seconds to access ELETE J MACRO SETUP to the confirmation screen SS ae Press each number 2 4 6 8 only once in any order A 6 u 8 Navigate through the menu options using the A and W buttons until you find the KEY BANK mode ma Press the e button to confirm this option i
17. tica 40100 Remote Control will allow you to control your EGi Audio amp Domotic System You will also be able to control all home appliances as well as your TV DVD audio equipment and radio receiver with your 40100 Remote Control To select the device or system that you want to control press the icon on the lower part of your remote control display 1 Select the TV device 1 2 j 4 2 Select the satellite receiver cable 3 Select the video device VCR BA me LY J saricoLJ _VcR JADO 4 Select the DVD device En JI Amp JJ _Aupio_J pomoric _Aupio_ J 5 Select the audio equipment 6 Select other audio sources 5 6 7 8 ee 7 Select the EGi domotic system 8 Select the EGi audio system www egiaudio com DOMOSe EGH Audio y Domotico Chapter 2 Before use Before using the 40100 Remote Control you must set it to ensure the correct transmission to the devices that are going to be controlled The setting can be done by introducing the CODES Manual Introducing the number from the code list assigned to the device to be controlled Automatic Allowing the remote control to interact with the device to be controlled You may also set the device through the LEARNING process Code Learn button Press the CODE button for 3 seconds to access to the confirmation screen Then press each number in any order to access to the next screen Press the amp and W buttons to select one of the following option
18. unction EGi 40100 Remote Control allows you to learn the codes from your existing remote control for instance TV without using the Manufacturer s Code List Before learning the codes from your existing remote control please read carefully the following 1 Before learning the new codes delete the existing ones from the remote control For instance if you want to control your living room TV instead of your kitchen TV delete first the commands of your kitchen TV This learning process does not work with all remote controls on the market 3 Notall of the EGi 40100 Remote Control keys can be programmed CODE SETUP KEY DELETE KEY MACRO KEY and SYSTEM SETUP Code learning process If we assume that you want to program the TV remote control on the EGi 40100 Remote Control then put both remotes together as shown in Figure 6 and proceed as follows art 1 Keep the CODE button pressed for 3 seconds to access to CODE JI DELETE _MACRO _SETUP CB D the confirmation screen 4 6 2 Press each number 2 4 6 8 only once in any order u 8 J 3 Navigate through the menu options using the A and W TE buttons until you find the LEARN option ISS 4 Press the e button to confirm this option 5 Press the button of the device to be controlled TV SAT CBL eines zo VCR DVD Audio etc for instance DVD Ame JA Audio J pomoric _Aupio J www egiaudio com DOMOS2 Audio y Domotico 6 The D button on the 40100 Remote Co
19. y Dom tica Chapter 1 Getting started Before using the 40100 Remote Control please make sure that the package contains the following components 1 x 40100 Remote Control 1 x Users Manual 1 x Pre Programmed Code List 3 x AAA 1 5 V Alkaline Batteries If the package does not include any of these components please contact your installer or the EGi Customer Service m BATTERY ORIENTATION Open the battery lid that is on the backside of the remote control Inside the battery compartment there are symbols showing in which direction the batteries should be placed Carefully follow these directions Do not mix new and old batteries Replace all batteries at the same time 40100 Remote control 1 IR Emitter to transmit the signals to the device to be 1 controlled E powese gt 2 Ambient light sensor to detect the light in the room T and turn the backlight on if necessary 3 LCD Touch sereen to display all control buttons of a the device to be controlled 4 Backlight If there is not enough ambient light the 4 ec remote control will be illuminated during use and 90 LY Cn seconds after pressing a button LSE AME AL yp y 5 Device buttons to select the device to be controlled 5 CP ene et nani 6 Connector to transfer settings between two remote controls using a wire not included 7 IR Receiver to use during the learning mode www egiaudio com gai DOMOS Audio Dom

Download Pdf Manuals

image

Related Search

Related Contents

取扱説明書 HDMI分配器(1入力・2出力)  BENDIX 03-F-01 User's Manual  Samsung SyncMaster  USER' MANUAL  IRW-1000 SF  Volcane II – Récupérateur de Chaleur Notice d  CAPA841/842 User's Manual VA2  Frankiermaschine CentorMail  2• PRINCIPE DE RACCORDEMENT  Gertboard-Handbuch deutsch  

Copyright © All rights reserved.
Failed to retrieve file