3x Magnification. Digital Zoom to 6x.
Contents
1. Night Owl Optics 4 i ky ON DIGITAL ENIGHTONISION 3x Magnification Digital Zoom to 6x ion Manual n S t r u ci l 0 n d n u d CAUTION Do not point Infrared Emitter directly into eye at close range WARNING Never look through this device directly at or near the sun There is a risk of BLINDING YOURSELF Children should only use this device under supervision Keep packaging materials away from children There is a risk of SUFFOCATION Attention Indoor Lighting may cause the image to PULSE or STROBE This device is intended for use in the dark The NexGen s primary purpose is to amplify natural outdoor light for viewing objects at a distance If you test indoors with the lights turned on the 60Hz frequency of indoor lighting systems will cause the image to pulse or strobe This is not a defect 2 DANGER to your child RISK of physical injury VAN This device contains electronic components that are battery powered Never leave a child unsupervised with this device The device should only be used as per these instructions otherwise there is a serious RISK of ELECTRICAL SHOCK Children should only use this device under supervision Keep packaging materials plastic bags rubber bands etc away from children There is a risk of SUFFOCATION Batteries should be kept out of children s reach When inserting batteries please ensure the polarity is correct Leaking or damaged batteries can cause injury i2. www nightowloptics com Errors and technical changes reserved MxGenPro Made in China 121411
3. f they come into contact with the skin If you need to handle such batteries please wear suitable safety gloves TIPS on cleaning Or Remove the batteries before cleaning Clean the exterior of device with a dry cloth Do not use Cleaning fluids so as to avoid causing damage to electronic components Protect the device from dust and moisture Store the device in the bag supplied DISPOSAL Dispose of the packaging material s as legally required Important It is advisable to remove the batteries when the device is not used for more than 24 hours This prevents the batteries from leaking and extends their service life Please do not use rechargeable batteries since the base voltage they provide is insuffi cient We recommend using high performance type AA 1 5 V alkaline batteries Technical Data Model Sensor Resolution Micro Display Resolution Magnification FOV in degrees Field of view at 200 ft Minimal Focal Distance Eyepiece Adjustment Battery Requirements Dimensions Weight Lens Diameter Infrared Illuminator Includes Carry bag Instruction manual Power Switch Oia Frame Rate Zoom ib IR Ocular Lens Eyepiece 4 Objective Lens 5 Oa Battery Compartment xGenPRO 640 X 480 pixels VGA 320 X 240 pixels QVGA 3x to 6x 7 degrees 24 ft 1M 4 Diopter 4 AA alkaline batteries not included 6 0 X 2 20 X 3 80 12 5 oz without ba
4. o is an active night vision device the IR is always illuminated The user can control the intensity of the IR beam but cannot turn it off There are 3 IR settings LOW default 1 bar MEDIUM 2 bars HIGH 3 bars At close range and at low FPS settings too much IR illumination may overexpose the image In order to see objects at longer distances or to see in the darkest outdoor environments choose a higher IR setting The higher the IR setting the farther the IR beam will project Digital Zoom Press Hold and Release the small button to double the magnification with the digital zoom function e Hold the button for one second Upon release zoom will be activated e Press Hold and Release again to remove digital zoom 7 The following table provides a list of possible problems which may occur during the operation of the device TROUBLESHOOTING Problem Possible cause Solution The device cannot be switched on Check to ensure the correct polarity of the batteries Reposition Batteries Switch the device off and then on again Poor image quality Check whether the eyepiece and lens are appropriately adjusted Ensure that the lenses are not dirty Carefully clean the lenses with a soft and lint free cleaning cloth e g microfiber Operating Conditions While intended for viewing in the dark use in daylight will not damage the device but may result in a temporarily overex
5. on products that have been subject to indirect damage due to misuse abuse accident and alteration due to the attempt to repair a unit by a non authorized repair agent During the Warranty period Warrantor and or any of its affiliates or authorized repair agents will at their discretion repair or replace defective parts in the warranted products free of charge Proof of purchase is required to make a claim under this warranty PROCEDURE FOR WARRANTY CLAIM Please contact our Night Vision Customer Service Representative by mail or telephone for return authorization Warrantor will not accept any returns unless they contain a return authorization number issued by a Night Owl Optics Customer Service Representative To return your device for service please pack in its original carrying case Also please pack the unit with enough protective material so it does not get damaged or scratched during shipment Please include your name shipping address telephone number along with proof of purchase and a brief note describing the defect The unit will be repaired or replaced at the discretion of the Warrantor In the event the repairs are not covered by this Warranty an estimate will be sent for your approval NOTE TO CUSTOMERS OUTSIDE THE USA This warranty may vary in other countries check with your distributor for details Warranty does not cover shipping costs Night Owl Optics 1465 H Henry Brennan Dr El Paso Texas 79936 1 800 444 5994
6. posed image Do not expose to rain extreme heat or shock CAUTION Do not point Infrared Emitter directly into eye at close range Keep out of reach of children The infrared emitter emits a BRIGHT although invisible beam of light As with any bright light do not point into the eye Special operating characteristics If the device has initially been used in cold conditions and is then brought into a warmer room allow it to stand in its case for at least 2 3 hours to avoid any condensation forming on the electro optical elements Never immerse the device in liquids Do not expose the device to either rain or strong sunlight Avoid exposure to severe shock or heat sources which may damage the device 9 Customer Service If you experience any problems with your device or if your device is in need of service please call our customer support number 1 800 444 5994 The hours of operation are 8 00 a m 5 00 p m MST Monday to Friday LIMITED ONE YEAR WARRANTY Congratulations on the purchase of your new Night Vision device This certifies that the Warrantor warrants this product to be free of defects in material and workmanship when used in accordance with the accompanying owner s manual Warrantor s obligation under this Warranty shall be limited to the original purchaser to repair or replace free of charge within the specified period of Warranty This Warranty is not transferable This Warranty does not apply to any Night Visi
7. tteries 37mm Built In DC 4 5V 33 4 batteries AA BCE Infrared Illuminator IR Ob Compartment door with lock Introduction The Night Owl Optics xGenPro Digital Night Vision Viewer features the latest innovations in affordable consumer night vision technology Designed for viewing out to a distance of 100 yards with the assistance of a powerful built in infrared illuminator the xGenPro viewer performs in low light conditions or complete darkness Battery installation 1 Rotate the locking tab counterclockwise to unlock the battery cover and flip it open 2 Install 4 AA alkaline batteries as shown in illustration 6a Pg 4 Please note polarity of batteries 3 Close the battery compartment and rotate the tab clockwise to lock it shut Start Up Move power switch to the ON position Focus The xGenPro has two focusing mechanisms 1 The EYEPIECE allows you to focus your individual eyesight onto the microdisplay 2 The OBJECTIVE LENS brings objects at different distances into focus Press the CONTROL BUTTON to see characters on the microdisplay With these characters illuminated rotate the EYEPIECE until the characters come into focus After focusing the EYEPIECE to your eyesight no further adjustment of the EYEPIECE is necessary unless you move it accidentally Then rotate the OBJECTIVE LENS to bring objects within your field of view into focus The xGenPro requires manual focusing Just as your e
8. yesight must refocus on objects at varying distances you must also rotate the OBJECTIVE LENS to focus precisely on each object you view Operating Controls The two buttons located at the top of the device allow you to control both the FRAME RATE and the IR INTENSITY Frame Rate The small button controls the Frame Rate Frame Rate is similar to the exposure time on an old film camera where the longer the shutter remains open the greater the amount of light exposure With the xGenPro the electronic sensor can be allowed more time to gather up light before processing the image The longer the exposure time and the lower the frame rate FPS the more light is gathered There are 3 exposure settings Frames per Second Light Gathering 25 Low default 15 Medium 08 High The current frame rate setting is displayed at the top center of the display In the very darkest environments and for viewing objects at a greater distance choose the 8FPS setting Lower FPS settings have the disadvantage of reproducing a slower moving image A moving image at lower FPS settings may appear to smear This is not a defect but a characteristic of low frame rate operation Operating Controls continued IR Intensity The built in infrared illuminator IR casts a beam of infrared light that is invisible to human and animal eyes Using the large button the user can control the brightness or intensity of the IR illumination The xGenPr
Download Pdf Manuals
Related Search