Felhasználói kézikönyv User manual
Contents
1. TRONG 2 0 YOUR RECEIVER 2 1 Default PIN code 1234 2 2 Front panel Fig 1 1 Smartcard reader Built in Conax smartcard reader for encrypted channels with Conax smartcard and valid subscription Insert smartcard with the chip side down 2 Power button Turn ON from standby and turn OFF to standby mode 3 AV Viewing mode switch channel up down Menu mode for navigation The Conax smartcard and subscription are not part of this set top box 2 3 Rear Panel Fig 2 1 ANTIN To connect an antenna for reception of broadcasting signal TOTV To connect a TV set 3 SPDIF coaxial To connect to digital audio amplifier HDMI To connect receiver to your TV set using an HDMI cable 5 TV SCART To connect receiver to your TV set using a SCART cable 6 VIDEO RCA To connect to the RCA video input of your TV or VCR using an RCA cable 7 AUDIO L R To connect to the audio input of your HIFI or television 8 USB device To connect an external storage device 9 Power cable To connect the receiver to your main power supply 2 4 CA Interface Although some TV and radio services are free to air others are only available on a subscription basis and can only be received via a Conditional Access component Inserting a CA card Fig 3 It is suitable for Conax coding system 1 Open the right hand flap on the front panel of the product to access the card slot 2 Insert the CA card into the slot Insert the smartcard with the chip side d2. General data Supply voltage 220 240 V AC SMPS 50 60 Hz Power consumption max 14 W typ 5 84 W Power consumption in standby 0 97 W Operating temperature 0 to 40 C Storage temperature 10 to 70 C Operating humidity range 25 75 RH non condensing Size W x D x H in mm 235 x 135x43 mm Weight 0 57 kg www strong tv 23 STRONG tai DIGITAL TV a www strong tv
3. Locked channels can only be watched after entering the pin code DEFAULT PIN 1234 To lock or unlock a channel press RED in the TV Channel List The red Lock sign on the top of the screen moves up to indicate that the Lock function is selected Use A V to select the channel of choice and press OK to lock or unlock it You are asked to enter the pin code DEFAULT PIN 1234 Locked channel will be marked with the 8 symbol Locking unlocking multiple channels in one session is possible When all changes have been made press EXIT twice A confirmation banner pops up Select Yes to save the changes or No to discard Locking unlocking multiple channels in one session is possible 7 1 1 3 Skipping channels Channels marked with Skip will be skipped when zapping through channels with the A V buttons However these channels are still available from the channel list To mark channels for skipping press GREEN in the TV Channel List The symbol on the top of the screen moves up to indicate that the Skip function is selected Use AV to select the channel of choice and press OK to mark or unmark it for skipping Channels set for skipping will be marked with the symbol When all changes have been made press EXIT twice A confirmation banner pops up Select Yes to save the changes or No to discard 7 1 1 4 Moving channels in the FAV list Select the Favourite group in which you like to move your channel To enable the move function press YELLOW in t
4. t wait to enjoy your new high definition digital terrestrial receiver The following quick guide will make you familiar with the basic operation of this device We do however advice you to read the full manual to get the best performance from your receiver To turn your receiver ON or to standby use the button on the remote control Choose a channel with the AV buttons You can also digit the channel number with the 0 9 buttons on the remote control or press OK in viewing mode to display the channel list The volume can be adjusted with the lt P buttons If you have a Conax smartcard from your provider please insert it into the CA slot on the right hand side of the receiver behind the flap Insert the card with the chip side down 6 0 OPERATION Your new receiver is equipped with several features to make watching TV a true pleasure This paragraph describes these features Please also read chapter 7 0 to get familiar with the menu of your receiver 6 1 Changing channels Your new receiver is equipped with four ways to change channels m Via direct access using the 0 9 buttons m Via the channel list through the OK button Via the PG and PG buttons m Via the A W OK buttons www strong tv 9 STRONG RA DIGITAL TV 6 1 1 Direct access via the 0 9 buttons To gain direct access to a certain channel simply input its number with the 0 9 buttons on the remote control Channel numbers can be up to four digits long Enterin
5. Damage Requiring Service If you notice any of the conditions described below while using a specified AC adapter unplug it from the wall outlet and refer servicing to qualified service personnel 1 Liquid has been spilled onto the product or some other object has fallen into the product 2 The product has been exposed to water 3 The product does not operate normally despite following operating instructions Adjust only the controls described in the operating instructions as improper adjustment of other controls could damage the product and require extensive repair word by a qualified technician 4 The product has been dropped or damaged in any way 5 The product exhibits distinct change in performance Replacement Parts When replacement parts are required make sure that the authorized service centre uses only parts with the same characteristics as the originals as recommended by the manufacturer Unauthorized substitution of parts could result in fire electrical shock or create other hazards Safety Check Upon completion of servicing or repairs ask the service technician to perform safety checks to determine that the product is in good working order Apparatus shall not be exposed to dripping or splashing and no objects filled with liquids such as vases shall be placed on or next to the apparatus Where the mains plug or all pole mains switch is used as the disconnect device the disconnect device shall remain readily operable Rem
6. IN connector on the back of the receiver Use a properly shielded antenna cable and suitable connectors The TO TV connector allows you to loop the antenna signal to a second receiver or TV set If your indoor antenna needs a 5 V power source to operate please select antenna power ON in the antenna menu 3 2 Connecting to HD TV with HDMI cable The HD TV set shall be connected with the receiver with a good quality HDMI 1 3 or higher cable This connection gives the highest possible quality 3 3 Connecting to TV with SCART cable The SRT 8903 is also equipped with a SCART connector and so the TV set can alternatively be connected to the receiver with a good quality SCART cable However the full potential of HD broadcast quality can only be obtained when using an HDMI cable and an HD TV 3 4 Connecting to TV with cinch cable TV sets without SCART or HDMI input s can be connected to the receiver with suitable cinch cables Connect one end of the cable to the Audio L R and VIDEO connectors on the back of the SRT 8903 Connect the other end to the respective inputs on your TV set This connection will give analogue picture quality www strong tv 7 STRONG Lato DIGITAL TV 3 5 Connecting to a digital audio amplifier with S PDIF By connecting your receiver to a digital amplifier or home theatre system you can enjoy the best possible sound quality and multi channel audio depending on broadcast Connect your digital audio
7. Please read the following recommended safety precautions carefully The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of not isolated dangerous voltage with the inside ofthe product that may be of sufficient magnitude to constitute a risk of electric shock to persons The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and servicing instructions in the literature accompanying the appliance Read All Instructions Before you use the product read all operation instructions For more information on accessories such as the lithium ion battery refer to the manuals provided with those products Save These Instructions Save all safety and operating instructions for future reference Heat Warnings Read carefully and follow all warning labels on the product and those described in the instructions Follow Instructions Follow all instructions provided with this product Cleaning Always unplug this product from the wall outlet before cleaning Use only a damp cloth for cleaning Never use any type of liquid or aerosol cleaner or any type of organic solvent to clean this product Attachments For your safety and to avoid damaging the product use only accessories recommended by STRONG Water and Moisture Never use this product around water near a bathtub kitchen sink laundry tub wet basem
8. amplifier or home theatre system with a suitable cinch cable to the S PDIF connector on the back ofthe receiver To hear multi channel audio on your audio set select Bitstream for the digital audio output in the TV system menu 3 6 Connecting to a digital audio amplifier and TV using HDMI By connecting your receiver to the latest digital amplifiers or home theatre systems with HDMI connections you will enjoy the best possible sound quality and multi channel audio depending on broadcast Connect the HDMI output ofthe receiver to an input of your amplifier and then connect the HDMI output of the amplifier to your TV set Select the correct input on your amplifier to watch and listen to programmes To hear multi channel audio on your audio set select Bitstream for the digital audio output in the TV system menu 3 7 Connecting a USB storage device NOTE We recommend the use of a hard disk drive USB 2 0 or higher for recording and playback of TV events For proper functioning of the timeshift and recording functions a fast USB device such as a hard disk drive is needed Interrupted playback or distorted pictures during playback or timeshift are indications for low device speed STRONG cannot guarantee proper functioning of recoding and or timeshift functions with all USB devices 4 0 STARTING UP FOR THE FIRST TIME If you have a Conax smartcard from your provider please insert it into the CA slot on the right hand side of the
9. displayed Select Yes to return to the factory settings Select No to cancel Press EXIT to leave 7 4 3 S W Upgrade by OTA This receiver is equipped with an Automatic Over The Air software upgrade function When the receiver is switched to standby mode SrCH is displayed on the front panel The receiver automatically checks new software Ifthe receiver detects new software the user will be notified about the new software availability at the next power on Use the lt P buttons to select Yes to process the software update or select No and press the OK button to cancel and proceed to the normal operation mode If new software is not available the receiver switches to standby and displays the current time 7 4 4 Upgrade by USB This feature allows you to upgrade receiver software via the USB port If new software is available for your receiver it can be downloaded from our website www strong tv Place the software file unzipped in the root directory of your USB storage device HDD memory stick etc and insert this device into the USB port ofthe receiver Select Upgrade by USB from the Tools menu and press OK to proceed The upgrade menu will now be displayed Use AV to select Upgrade Mode and choose option Allcode Use AV to select Upgrade File and choose the file containing the new software When all settings have been made move the highlight to Start and press OK to start the upgrade process After a few seconds the receiver a
10. lt gt 73 fe ON G F ldi digit lis HD belt ri egys g SRT 8903 DIGITAL TV STRONG Picture similar Felhaszn l i k zik nyv User manual DO DOLBY DIGITAL PLUS www strong tv Fig 1 T cHlP DOWN CH P LEFEL Fig 2 Digital High Definition Terrestrial Receiver SRT 8903 MANUFACTURED UNDER LICENSE Y AND THE DOUBLE D S FROM DOLBY LABORATORIES MBOL RKS OF DOLBY LABORATORIES M Supplied by STRONG amp Co Japan ANTI e Fig 3 T CHIP DOWN CHIP LEFEL CA Card 18 i TK SUME lt a BP 7 as ee 26 1 STRONG gs rt r SSS 27 Fig 6 Fig 7 l RCA cable Terrestrial Antenna ANTIN J ovo Digital Audio Amplifier USB Storage Device 23 Aug 2012 16 44 PART 2 English i TRONG DIGITAL TV TABLE OF CONTENTS 1 0 INSTRUCTION 1 1 Safety Instructions 1 2 Storage 1 3 Equipment Set up 1 4 Accessories 1 5 Usage of external USB devices 2 0 YOUR RECEIVER 2 1 Default PIN code 1234 2 2 Front panel 2 3 Rear Panel 2 4 CA Interface 2 5 Remote Control 2 6 Installing the Batteries 2 7 Using the Remote Control 3 0 CONNECTIONS 3 1 Connecting to a terrestrial antenna 3 2 Connecting to HD TV with HDMI cable 3 3 Connecting to TV with SCART cable 3 4 Connecting to T
11. press OK to start auto scan The receiver will store all newly found channels in the channel list 7 2 2 Channel Scan Use AV to select Installation press OK or to advance Use A W to select Channel Scan and press OK to enter Use lt P to toggle between available scan modes By Channel and By Frequency If By Channel is selected use the cursor buttons to select Scan Band and Channel No If By Frequency is selected use the cursor buttons to select Frequency and Bandwidth Highlight Search and press OK to start scanning Newly found channels will be stored in the channel list 7 2 3 Aerial Adjustment Use A W to select Installation press OK or to advance Use A W to select Aerial Adjustment and press OK to enter Use AV move the highlight to the setting you wish to alter and use lt P to change values The following settings are available Antenna Power Set to On if you use an active antenna When set to On 5 V will be present on the ANT IN connector of the receiver Select Off for passive antennas Beeper Select On for an audible indication of signal reception Offturns the beeper off Channel No Select a channel that is known to carry broadcast in your region The Signal Strength and Signal Quality bars give a visual indication of the reception Adjust your antenna to obtain maximum signal strength and quality Press EXIT to leave the Aerial Adjustment screen 7 2 4 LCN Logical Channel Numbering If LCN Logical Chann
12. receiver behind the flap Insert the card with the chip side down If you are using your receiver for the first time the Welcome Easy install menu appears Use AV to move the highlight to the setting you wish to alter and use lt P to change values Start by selecting your region using lt P When you have selected your region press W to move the highlight to Language Select your language using lt gt Language Select your language Region Select your region where this receiver is used Subtitle Select Normal to display subtitles per default Select Hard of Hearing to show HoH subtitles per default Select Offto hide subtitles per default Aspect Mode Use this option to select the aspect ratio ofyour TV and the preferred conversion method Options are Auto automatic detection of aspect ratio 4 3 Panscan Displays 16 9 widescreen broadcasts full screen on your 4 3 TV 4 3 letterbox black bars on top and under the picture on a 4 3 TV and 16 9 use this setting for 16 9 TV sets Scan mode Select All to store scrambled and free to air channels or select Free to store only free to air channels Note you cannot watch scrambled channels with this receiver Connection Use this option to select the connection to your TV set Select HDMI or TV SCART If you are using a cinch cable this selection is not important 8 www strong tv PART 2 English lt TRONG DIGITAL TV When all settings have been made move the hi
13. the Media menu and press OK to enter Use A W to move the highlight and lt P to change settings Press EXIT to quit Timeshift Timeshift to Record Record Selection Standby after record Step to NOTE the procedures shown below If the receiver does not work properly after checking it please contact Service Hotline Do NOT try to open or disassemble the receiver It may cause your dealer or the loca a dangerous situation STRONG DIGITAL TV On or Off When Time Shift is set to Off Time Shift becomes inactive On or Off When set to On Timeshift is also possible during recording Select the partition whereto the receiver should record On or Off Select if receiver should go into standby mode after a timer recording 30 sec to 10 min Set the time step you like to jump forward to with the button 3 during playback of recorded files Please use a well known brand USB 2 0 USB HDD for recording and Timeshift Some USB devices may not be usable due to their quality 8 0 TROUBLESHOOTING There may be various reasons for abnormal operation ofthe receiver Check the receiver according to and warranty will be void Problem Possible cause What to do LED indicator Mains lead unplugged Check mains plug not lit Mains fuse blown Check fuse No signal found Aerial is disconnected Aerial is damaged misaligned Out of digital signal area Check aerial lead Check aerial Check with dealer Switch recei
14. use a setting that matches your TV s specifications After a selection has been made you will be asked to confirm Note Selection is only applicable on HDMI You will be asked to confirm the new setting If not confirmed within 15 seconds the resolution will fall back to the previous state Aspect Mode Use this option to select the aspect ratio of your TV and the preferred conversion method The options are Auto automatic detection of aspect ratio 4 3 Panscan Displays 16 9 widescreen broadcasts full screen on your 4 3 TV 4 3 letterbox black bars on top and under the picture on a 4 3 TV and 16 9 use this setting for 16 9 TV sets Connection Use this option to select the connection to your TV set Select HDMI or TV SCART Digital Audio Output Toggles between PCM and Bitstream output When PCM is selected all audio will be converted to stereo audio Bitstream enables multi channel audio on the digital output for use with a home theatre set 7 3 3 Local Time Setting Here you can set up your region and time zone Region Use lt P to select the region you live in GMT Usage Set to On for broadcaster defined time or to Off to input time and date manually GMT Offset Allows you to adjust the time zone you live in This option is only available when GMT Usage is set to On The GMT Offset range is 11 30 12 00 increasing by half hours progressively Some cities matching the set GMT Offset are displayed at the bottom
15. Edit Channel Installation System Setup Tools Game and Media Throughout the main menu MENU or EXIT can be used to get back to the previous screen 7 1 Edit Channel Use AV to select Edit Channel and press OK or P to enter Use A W to highlight a sub menu and press OK to select Press EXIT or 4 to get back to the main menu 7 1 1 TV Channel List In the Edit Channel menu select TV Channel List with A V and press OK to enter Use lt P to change the channel group provided that you have already set up favourite groups Select a channel with A W Press OK to view the selected channel in the preview box www strong tv 11 STRONG ita DIGITAL TV 7 1 1 1 Adding channels to favourite lists Channels from the TV Channel List can be added to up to 8 different favourite groups Press FAV in the TV Channel List to access this function The FAV sign on the top of the screen moves up to indicate that the favourite function is selected Use A V to select a channel you wish to add to a favourite group When the channel of choice is highlighted press OK A list with all available favourite lists will now pop up Use A V to select the favourite list you wish to add the channel to and press OK then press EXIT to finalize the process Favourite channels will be marked with a symbol When all changes have been made press EXIT twice A confirmation banner pops up Select Yes to save the changes or No to discard 7 1 1 2 Locking channels
16. PIN and press OK to open Confirm the new PIN A notification message appears about the successfully change or about the missed incorrect code Maturity Rating You can restrict access for scrambled channels by the Conax system provided age settings ifthe operator activates and broadcasts it in their system in order to avoid your child accessing unwanted programmes If the maturity rating is set and active on the selected scrambled channel the receiver blocks the decoding and will request the CA PIN code for the decoding Use the AY buttons to select the Maturity Rating option then press the OK button to open it The following options available in this menu Current card level and Enter CA PIN to modify 16 www strong tv PART 2 English lt TRONG DIGITAL TV Current card level The CA level which is currently set on the smartcard The following levels available in the Conax system G General Audience PG Parental Guidance A Over 18 and X Erotic Use the A V buttons to select the Current card level option and then use the lt P buttons to change the value Then press the OK button The cursor will jump to the Enter CA PIN to modify option In order to process the maturity rating change you need to type the CA PIN code Enter CA PIN to modify Enter the current CA PIN code with the numeric buttons About Conax CA This menu provides information about the Conax system and the smartcard 7 3 6 Parental Lock This menu all
17. UE to save the changes When all changes have been made press EXIT twice 7 3 9 Auto Standby Auto Standby is a new feature that helps you reduce power consumption When set to On the receiver will turn to standby if it doesn t receive any commands for three hours Set Auto Standby to Off to avoid the automatic switch down www strong tv 17 STRONG anita DIGITAL TV 7 4 Tools Press MENU in viewing mode to enter the Main Menu Select the Tools submenu with A V and press OK or P to enter Use A W to highlight a submenu and press OK to proceed Press EXIT to leave 7 4 1 Information This submenu shows receiver specific information such as the hardware version and the software version It also displays our web address www strong tv Please have the Information screen on hand when calling our hotline The person who answers your call might ask for the information given in this screen 7 4 2 Load Factory Setting This option allows you to reset the receiver to the factory settings which clears all stored channels WARNING By resetting your receiver to factory default all your settings and stored channels will be permanently deleted Please only use this option if the receiver suddenly should work in an unexpected way Use A W to select Load Factory Setting in the Tools menu and press OK You are asked to enter your password Enter the correct password with the 0 9 buttons default 1234 A confirmation window is
18. V with cinch cable 3 5 Connecting to a digital audio amplifier with S PDIF 3 6 Connecting to a digital audio amplifier and TV using HDMI 3 7 Connecting a USB storage device 4 0 STARTING UP FOR THE FIRST TIME 5 0 QUICK GUIDE TO USING YOUR RECEIVER MO O 00 00 00 00 NNINYNNNNINDQDUUUUUNIAAALWNN 6 0 OPERATION 6 1 Changing channels 9 6 2 Info Banner 10 6 3 Selection of audio language 10 6 4 Teletext 10 6 5 Subtitles 10 6 6 Timeshift 1 6 7 EPG Electronic Programme Guide 1 6 8 Instant Recording 1 7 0 MAIN MENU 1 7 1 Edit Channel 1 7 2 Installation 14 7 3 System Setup 14 7 4 Tools 18 7 5 Games 19 7 6 Media 19 8 0 TROUBLESHOOTING 21 9 0 TECHNICAL SPECIFICATIONS 22 STRONG declares that this item complies with the basic requirements and other relevant regulations of directives 2004 108 EC and 73 23 EC ROHS 2002 95 EC Subject to alterations In consequence of continuous research and development technical specifications design and appearance of products may change Dolby and the double D symbol are registered trademarks of Dolby Laboratories Conax is a trademark of Telenor Conax AS Antenna Hung ria is a trademark of Antenna Hung ria Zrt all other product names are trademarks or registered trademarks of their respective owners STRONG 2012 All rights reserved www strong tv 1 STRONG nit DIGITAL TV 1 0 INSTRUCTION 1 1 Safety Instructions This receiver has been manufactured to satisfy international safety standards
19. ain to delete the marker point 2 Jump to the next marker point 3 Jump forwards in time See details in 7 6 5 DVR Configuration under Steps to NOTE You can also access the Record Manager from viewing mode with the RED key on the remote control The help banner at the bottom of the screen explains all buttons used to edit in this Record Manager Press EXIT to save the settings and quit the menu 7 6 3 DVR HDD Information This option shows relevant information about the connected USB device Select DVR HDD Information from the Media menu and press OK to enter Press EXIT to leave 7 6 4 HDD Format The HDD format menu allows you to format the connected USB device WARNING Formatting will permanently delete ALL data stored on the connected device Please make a backup copy of all data you wish to keep before entering the HDD Format menu STRONG cannot be held responsible for loss of data from USB devices used with this receiver Select HDD Format from the Media menu and press OK to enter Use lt P to select the partition you wish to format Partition 1 is set per default and press W to highlight Format Press OK to proceed select Yes or No then OK or press EXIT to leave without formatting NOTE It is possible to use already NTFS formatted USB disks 20 www strong tv PART 2 English 7 6 5 DVR Configuration This menu allows you to make settings for Timeshift recording and playback Select DVR Configuration from
20. buttons to enter the start time Duration Use the 0 9 buttons to enter the timer duration When all settings have been made according to your wishes use A V to move the highlight to Save and press OK to confirm To quit the timer without saving your settings move the highlight to Cancel Please connect a USB storage device with sufficient free space before you start a timed recording 7 3 5 Conax Conditional Access Conax Conditional Access Select the Conax Conditional Access menu with the A W buttons and press OK to open it In this menu you can access smartcard information and by using the Conax smartcard provided by your operator you can access scrambled channels You can select the following options which are related to your smartcard Subscription status Event Status Token Status change CA PIN Maturity Rating and About Conax CA Subscription Status Provides information about the current subscription status and entitlements Event Status Provides information about the current event status Tokens Status Provides information about the current token status Change CA PIN The following options available in this menu Change PIN Please Enter CA PIN Please enter new CA PIN Please confirm new CA PIN You can change the default smartcard pin code which was provided by the operator Ifyou do not know the pin code please contact the operator helpdesk Enter the provider PIN first then use the A V buttons to select the Change CA
21. el Numbering is activated and an LCN signal is provided by the operator channels will be stored in an operator defined order Set LCN to On to activate operator defined channel numbering or Off to store channels in found order 7 3 System Setup This menu allows you to manage the system settings of your receiver It consists of the following sub menus Language TV System Local Time Setting Timer Setting Conax Conditional Access Parental Lock OSD Setting Favourite and Auto Standby Press A W to highlight a menu and press OK advance to the next screen Use A V to move the highlight to a setting Values can be changed with lt P Press EXIT to leave 14 www strong tv PART 2 English S7 TRONG DIGITAL TV 7 3 1 Language This menu allows you to set up your language preferences Language Use lt P to select language for the On Screen Display First Audio Use lt P to select audio language Second Audio Use lt P to select a language that will be played when the language selected in First Audio isn t available Subtitle Language Use lt P to select subtitle language Subtitle Use lt P to select subtitle type to be displayed automatically The options are Normal Hard of Hearing and Off Teletext Use lt P to select teletext language when available 7 3 2 TV System Use this menu to match your receiver to your TV set The following settings are available Video Resolution Toggles between 576i up to 1080p Please
22. ent swimming pool or in the rain Location To avoid damage to the product and prevent personal injury never place this product on an unstable stand tripod bracket Follow the instructions that describe how to safely mount the product and use only the mounting devices recommended by the manufacturer Power Sources Connect this product only to the power source described on the product label If you are not sure about the type of power supply in your home consult your local power company Refer to instruction pages for information on using the product with a battery Grounding Polarization If this product is used with a specified AC adapter the adapter may be equipped with a polarized alternating current line plug a plug with one blade wider than the other This safety feature allows the plug to fit into the power outlet only one way If you cannot insert the plug into the wall outlet pull it out reverse it and have the receptacle replaced Ventilation Slots and openings They are provided for ventilation to ensure reliable operation of the receiver and to protect it from overheating These openings must not be blocked or covered The openings should never be blocked by placing the receiver on a bed sofa rug or heat register This receiver should not be placed in a built in installation such as a book case or rack unless proper ventilation is provided Ensure that free airflow is maintained around the receiver Protecting
23. eo resolution Aspect ratio Audio Decoder Audio Decoding Audio Mode Dolby and the double D symbol are registered trademarks of Dolby Laboratories DVB T COFI 9 0 TECHNICAL SPECIFICATIONS DM 16 QAM 64 QAM 174 230 MHz VHF 470 862 MHz UHF 6 7 8 MHz switchable bandwidth 1SO13818 2 MPEG 2 MP HL ISO14496 10 AVC H 264 HP L4 1 MPEG 4 ASP 576i25 SD 576p50 SD 720p50 HD 1080i25 HD 1080p50 HD 4 3 Letterbox 4 3 Pan amp Scan 16 9 Auto ISO 11172 3 ISO 13818 3 MPEG ISO14496 3 MPEG 4 AAC LC HE Dolby Digital Dolby Digital 2 0 5 1 Mono Dual Channel Stereo PCM and Bitstream on S PDIF Decoding system for Conditional Access and smartcard reader Conax 22 www strong tv PART 2 English S7 TRONG DIGITAL TV Memory and system Flash memory 2 Mbytes System memory 64 Mbytes Multimedia Video recording PS Format Video playback MPEG 1 and MPEG 2 encoded mpg VOB AVI MKV TS MPEG 4 and MOV DAT Divx Xvi Audio playback MP3 OGG Picture view JPEG JPG BMP format STRONG cannot guarantee the playback of external video files which have not been recorded by this device Connectors ANT IN IEC type female TO TV IEC type male loop through HDMI 1 3 with HDCP copy protection TV SCART RGB CVBS Audio L R output with volume control S PDIF coaxial digital audio output 3 RCA Audio L amp R and Video CVBS USB 2 0 port 5 V 800 mA max supported
24. ereo mono left and right can be selected with the lt P buttons 6 4 Teletext Your receiver includes a fully featured Teletext To access Teletext press the TTX button in viewing mode and use the 0 9 buttons to input the number of the page you wish to see The coloured buttons of the remote control allow you to jump to selected pages directly as indicated on the bottom of the teletext screen Use the A V buttons to select one page up or down use the lt P buttons to select subpages Press EXIT or TTX again to get back to viewing mode 6 5 Subtitles Some channels support a choice of subtitle languages Press SUBTITLE in viewing mode to display a list of available subtitle languages Select your subtitle of choice with A W and press OK to confirm Press EXIT to leave without making changes 10 www strong tv PART 2 e English lt TRONG DIGITAL TV 6 6 Timeshift Timeshift allows you to pause live broadcasts and resume playback later Press TIMESHIFT in viewing mode to activate this mode The message Timeshift On appears on screen live TV keeps playing To pause press the II button and press b to resume time shifted playback Press 4 gt gt for fast rewind fast forward Press II to return to live TV Press TIMESHIFT to exit the Timeshift mode NOTE Timeshift needs a connected USB storage device with sufficient free space and sufficient speed in order to work properly 6 7 EPG Electronic Programme Guide The Elect
25. ete function The Delete sign moves up to indicate that Delete is selected Use A V to highlight the channel you want to delete and press OK to mark it for deletion The receiver asks you to enter the pin code When you have marked all channels you want to delete press EXIT twice A confirmation banner pops up Select Yes to delete the marked channels or No to cancel 7 1 2 Radio Channel List Basically the operation of the Radio Channel List is the same as of the TV Channel List The only difference is that in the Radio Channel List there is no video information so it will always display the radio logo on the right preview screen 7 1 3 Delete all Use this menu to delete all stored channels Select Delete All with A V and press OK The receiver asks you to enter the pin code Default pin 1234 In the confirmation window select Yes with lt gt and press OK to delete or select No to cancel WARNING The Delete all function will permanently delete all current channels and all favourite lists from your receiver and you cannot leave the menu until you search for channels again www strong tv 13 STRONG agita DIGITAL TV 7 2 Installation 7 2 1 Auto Scan Use A W to select Installation and press OK or to advance Select Auto Scan with A V and press OK to enter Use lt P to toggle between FTA Only Yes and No When FTA Only is set to Yes scrambled channels won t be stored in the channel list Use A V to highlight Search Now
26. g a number with less than four digits is possible Just wait a few seconds and your receiver will switch to the selected channel or press OK immediately after selecting the channel number 6 1 2 Channel list Press OK in viewing mode to display the Channel List Use AV in the Channel List to highlight your channel of choice and press OK once to select the highlighted channel Press OK again to leave the Channel List TIP Use lt P to toggle between the All Channel list and favourite lists or press FAV for a list of available favourite lists 6 1 3 Using the AV OK or PG PG keys A OK switches to the next channel V OK switches to the previous channel PG switches to the next 10 channels PG switches to the previous 10 channels 6 2 Info Banner While watching TV you can press the INFO button at any time to get information about the current channel and event Press INFO twice for extended EPG details about the current channel Use the YELLOW button to switch current next event information Press INFO three times for technical details about the current channel Event information is displayed when available Availability depends on broadcast 6 3 Selection of audio language Some channels support a choice of audio formats and or languages To select another audio stream press AUDIO in viewing mode A list with available audio streams will now be displayed Use AW to select a stream and confirm with OK The audio channel as st
27. g symbols will serve as follow WARNING Indicates a warning information NOTE Indicates any other additional important or helpful information MENU Represents a button on the remote control Bold Characters Move to Represents a menu item within a window Italic Characters 1 4 Accessories m 1 User Manual m 1 Remote control unit m 2x Batteries AAA type NOTE The batteries should not be recharged disassembled electrically short circuited or be mixed or used with other types of batteries If rechargeable accumulators instead of batteries are going to be used we recommend using e g NiMH types with low self discharge to ensure long time operation of remote control 1 5 Usage of external USB devices m Itis recommended to use USB 2 0 storage devices If your device is not compatible to USB 2 0 specifications recording playback and other multimedia functions of the receiver would not work properly m STRONG cannot guarantee compatibility to all types of USB storage devices m Itis advised not to store important information on USB storage devices used with the receiver Always make backups of data on your USB storage device before using it with this receiver STRONG will not take responsibility for any loss of information or circumstances caused by loss of information Please ensure that either the USB device is already formatted to FAT FAT32 or format the USB device via your receiver www strong tv PART 2 e English lt
28. ghlight to OK and press OK to continue NOTE Wrong region selection can lead to missing channels or channels being stored on wrong positions in the channel list The receiver will now advance to the Aerial Adjustment screen This part of the installation wizard is of great help when setting up your antenna system Use A W to move the highlight to the setting you wish to alter and use lt P to change values The following settings are available Antenna Power Set to On if you use an active antenna When set to On 5 V will be present on the ANT IN connector of the receiver Select Off for passive antennas Beeper Select On for an audible indication of signal reception Offturns the beeper off Channel No Select a channel that is known to carry a broadcast in your region The Signal Strength and Signal Quality bars give a visual indication of the reception Adjust your antenna to obtain maximum signal strength and quality When all settings have been made press OK to start scanning The receiver will now search for all available channels When the scanning is finished the receiver switches to viewing mode TIP If the Welcome Easy install menu does not appear after switching on the receiver the first time reset the receiver to the factory settings by pressing the MENU button and selecting Load Factory Setting in the submenu Tools Default PIN 1234 5 0 QUICK GUIDE TO USING YOUR RECEIVER We at STRONG understand that you can
29. he OSD On Screen Display Subtitle On Off Shows list of subtitle languages Fast rewind fast forward For interactive functions submenu function buttons For Multimedia and Teletext functions To stop recording and shortcut to the Record Manager Slow motion button in timeshift or playback To freeze the picture or to initiate timeshift when a USB device is connected To start play or replay after picture freeze or timeshift www strong tv PART 2 English lt TRONG DIGITAL TV 2 6 Installing the Batteries Fig 5 Remove the battery cover from the remote control and put 2x AAA size batteries inside the compartment The diagram inside the battery compartment shows the correct way to install the batteries 1 Open the cover 2 Install batteries 3 Close the cover NOTE The batteries should not be recharged disassembled electrically short circuited be mixed or used with other types of batteries 2 7 Using the Remote Control Fig 6 To use the remote control point it towards the front of the digital receiver The remote control has a range of up to 7 metres from the receiver at an angle of up to 60 degrees The remote control will not operate if its path is blocked NOTE Sunlight or very bright light will decrease the sensitivity of the remote control 3 0 CONNECTIONS Fig 7 3 1 Connecting to a terrestrial antenna To receive a broadcast signal your terrestrial indoor or outdoor antenna must be connected to the ANT
30. he TV Channel List Fav group x The symbol on the top of the screen moves up to indicate that the Move function is selected Use A V to select the channel of choice and press OK to select it You can now move the selected channel up or down the channel list using AV When the channel has been positioned as wished press OK again The channel is now fixed on its new position When all changes have been made press EXIT twice A confirmation banner pops up Select Yes to save the changes or No to discard 12 www strong tv PART 2 English lt TRONG DIGITAL TV 7 1 1 5 Sorting channels in the FAV list Select your favourite list in the TV Channel list Press the lt P buttons to switch to the FAV group press the RED button to display sort options Sort Press RED to enter the Sort menu Use A V to select sorting method and press OK to confirm Possible methods are Name A Z Sorting in alphabetical order from A to Z Name Z A Sorting in alphabetical order from Z to A Free Scramble Free To Air channels will be first in the list Lock All unlocked channels will be placed first in the list Default Sorting by searched order from lowest to highest frequency or by LCN numbering 7 1 1 6 Delete channels from FAV list Select your favourite list in the TV Channel list Press the lt P buttons to switch to the FAV group press the RED button to display sort options Delete Press the BLUE button to enable the Del
31. of the screen Summer Time Select Off or On to add one hour extra for summer time during the summer Date Date and Time settings are available only when GMT Usage is set to Off Use the 0 9 buttons to enter the date Press EXIT to proceed Time Date and Time settings are available only when GMT Usage is set to Off Use the 0 9 buttons to enter the time Press EXIT to proceed Time Display Setting to On the time will be displayed constantly on screen www strong tv 15 STRONG unita DIGITAL TV 7 3 4 Timer Setting This menu allows you to set up to 8 timed events for recording or waking up the receiver Use A W to select Timer Setting from the System Setup menu and press OK to enter The receiver will display a list with 8 timers followed by their respective status Select the timer you want to set or change with A W and press OK to proceed The timer setup menu will now be displayed The following settings are available Timer Mode Choose between Off timer inactive Once Daily Weekly Daily means the timer will be executed every day Weekly means the timer will be executed the same day every week Timer Service Choose between Channel the timer will wake up the receiver or Record the timer will start recording the scheduled event Wakeup Channel Use lt P to select the channel the timer should wake up with Wakeup Date Use the 0 9 buttons to enter the date for the timed event Wakeup Time Use the 0 9
32. ote control transmits a directional infrared beam Ensure to aim the remote control directly at the infrared sensor of the unit during operation If the sensor has been covered or there is a large object between the RCU and sensor or it is exposed to direct sunlight or a strong artificial light fluorescent or strobe light the sensor may not be able to receive the remote signal In this case change the direction of the light or reposition the unit 1 2 Storage Your receiver and its accessories are stored and delivered in a packaging designed to protect against electric shocks and moisture When unpacking it make sure that all the parts are included and keep the packaging away from children When transporting the receiver from one place to another or if you are returning it under warranty make sure to repack the receiver in its original packaging with its accessories Failing to comply with such packaging procedures could void your warranty www strong tv 2 STRONG at DIGITAL TV 1 3 Equipment Set up We recommend you consult a professional installer to set up your equipment Otherwise please follow these instructions carefully m Refer to the user manual of your TV and your antenna m Make sure that the Audio Video connectors and outdoor components of the antenna are in a good condition and the Audio Video connections are well shielded This manual provides complete instructions for installing and using this receiver The followin
33. own www strong tv 5 STRONG PART 2 s English DIGITAL TV 2 5 Remote Control BIS Sore v 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 PG PG DTV VCR INFO VOL VOL MENU EXIT AV hid OK e TIMESHIFT 0 9 EPG RECALL AUDIO TV RADIO FAV FILE TTX SUBTITLE Coloured buttons MI Red Ib Green H Yellow gt Blue Fig 4 Turns the receiver On Standby Mutes the audio output of the receiver Page up down and 10 channels steps in the channel list mode No function Shows the current channel information Volume up down Open and close the main menu in a menu you will go one step back Exits from the menu or sub menu Menu Off Change channel to next previous Menu On Moves the cursor up down Menu Off Decreases increases the volume level Menu On Change settings for specific menus Menu Off Displays the current channel list Menu On Activates the highlighted menu item Records the TV programme to the connected storage device Activates deactivates the timeshift function Channel selection or value input Shows the EPG Electronic Programme Guide in TV mode Back to the previously shown channel Select audio mode and audio track Sets the current audio channel to left right or stereo with the L R buttons Toggles between TV and RADIO mode Open the favourite list Shows the Media Player list Shows Teletext on t
34. ows you to protect the installation menu and or channels with a password You can also enter a new password in the Parental Lock menu Use AV to select Parental Lock from the System Setup menu and press OK to proceed You will be asked to enter your pin code DEFAULT 1234 Menu Lock Locks the installation menu You can set Menu Lock to On or Off Channel Lock Choose between Off AGE 4 AGE 5 up to AGE 18 Channels with a parental rating above the chosen age will be protected with a password if available in your local broadcast New Password Enter your new password 4 digits here Confirm Password Re enter your password here to confirm 7 3 7 OSD Setting This menu allows you to change settings for OSD Timeout and OSD Transparency OSD timeout Sets the time after which on screen banners and messages disappear The range is 1 10 seconds OSD Transparency To set the OSD transparency from Off 40 with 10 steps Load Default OSD Setting Press OK to clear all OSD settings and reset to default values 7 3 8 Favourite This menu allows you to personalize the names of the 8 available favourite lists Use A W to select Favourite from the System Setup menu and press OK to proceed The names of all groups are now displayed Select a favourite group with A V and press OK to edit its name A text field pops up to the right of the screen Use lt P A W to select characters and enter them with OK When you have finished editing press BL
35. ronic Programme Guide is a very useful function that allows you to view event schedules and information and to book programmes for recording To access the EPG press the EPG button in viewing mode Use A W to select a channel and to select an event Press OK to display detailed information on the selected event Use EXIT to quit the detailed information screen Press RED to get to the Step Time function Use lt P to select the step of choice and OK to execute Press EXIT to quit the Step Time function Press GREEN to set a timer for a selected event Refer to section 7 3 4 for details on the timer function NOTE Availability of EPG data depends on broadcast 6 8 Instant Recording Your new receiver allows you to make an instant recording of the programme you are watching Simply press to start the recording To enter the duration for the recording press again Use the 0 9 keys to enter the recording time Then press OK During the recording a recording sign will be shown on the upper left of your TV screen To stop the recording press ll Select Yes and press OK again to stop the recording The menu functions are disabled during recordings Please connect a USB storage device with sufficient free space before you start a recording 7 0 MAIN MENU The main menu gives you access to settings multimedia functions and built in games To access the main menu press MENU in viewing mode The main menu consists of the following sub menus
36. sks Are you sure to burn flash Select Yes to finalize the upgrade or No to quit without upgrading 18 www strong tv PART 2 English lt TRONG DIGITAL TV WARNING After an update the receiver restarts automatically During the upgrade process NEVER disconnect the receiver from the mains or switch off the power Doing so might damage your receiver and will void warranty 7 4 5 Remove USB device safely Select Remove USB device safely from the tools menu and press OK The receiver will display a message indicating that you can safely remove your storage device from the receiver This can only be done if the receiver is not recording or is not in timeshift mode NOTE After performing this action the USB device is no longer accessible from your receiver To gain access to your storage device again re insert it or switch the receiver to standby and on again 7 5 Games Your receiver is equipped with two games which can be played on your TV screen using the receiver remote control Use A W to select Game from the main menu and press OK or P to proceed Select one of the available games Othello or Sudoku with A V and press OK to start the game Follow the directions on screen Use EXIT to quit a game 7 6 Media The Media menu consists of the following submenus Media Player Record Manager DVR HDD Information HDD Format and DVR Configuration Use A W to highlight a menu and press OK to enter Press EXIT to q
37. the Power Cord The power supply cord should be placed so it will not be walked on Never put a heavy object on the power cord or wrap it around the leg of a table or chair Keep the area around the power cord connection points at the power outlet and at the product connection free of all AC adapter or accessory power cords 2 www strong tv PART 2 English lt TRONG DIGITAL TV GENERAL PRECAUTIONS SAFETY PRECAUTIONS Lightning If a lightning storm occurs while using a specified AC adapter remove it from the wall outlet immediately To avoid damage from unexpected power surges always unplug the AC adapter from the power outlet and disconnect it from the receiver when the receiver is not in use Overloading Never overload wall outlets extension cords power strips or other power connection points with too many plugs Foreign Objects Liquid Spillage To avoid personal injury caused by fire or electrical shock from contact with internal high voltage points never insert a metal object into the product Avoid using the product where there is a danger of spillage Heat Never use or store this product near any heat source such as a radiator heat register stove or any type of equipment or appliance that generates heat including stereo amplifiers Servicing Refer all servicing to qualified personnel Attempting to remove the covers or disassemble the product could expose you to dangerous high voltage points
38. uit 7 6 1 Media Player This function allows you to play MPEG AVI MP3 JPG and many other type files from a connected storage device see details in the technical part Select Media Player from the Media menu and press OK to proceed Use A W to browse the connected USB device and use OK to open folders Press OK to play the highlighted selection The help banner at the bottom of the screen explains all buttons used in the Media player Press EXIT to quit NOTE You can also access the Media Player from viewing mode with the FILE key on the remote control www strong tv 19 STRONG ta DIGITAL TV 7 6 2 Record Manager The Record Manager gives you access to previously recorded events Select Record Manager from the Media menu and press OK to enter Use A W to highlight the recording you wish to play and press OK start playback Press EXIT to exit During playback it is possible to perform the following actions YELLOW To pause the playback BLUE To resume normal playback For fast forward or fast rewind during playback Press repeatedly for different speeds RED Press to stop a playback and return to the Record Manager GREEN Slow motion press repeatedly for different speeds When the timer banner is on screen activated by pressing BLUE or INFO the following actions are possible Press lt P and OK to jump forwards and backwards in time during playback 1 Set the marker point in playback press ag
39. ver s Antenna Power ON or connect external power for active antennas No picture or sound on TV HDMI is not selected on your TV or Amplifier or is set to higher resolution as TV supports TV is not switched on Switch to correct TV input Select lower resolution on receiver Switch TV on Scrambled channel Message Channel is scrambled Select alternative channel Insert provider smartcard Insert smartcard with chip side down No response to remote control Receiver off Remote not aimed correctly Front panel obstructed Remote batteries exhausted Plug in and turn on plug Aim remote at front panel Check for obstructions Replace remote batteries www strong tv 21 STRONG PART 2 English Problem Possible cause What to do Forgotten channel lock code Re install channels to cancel channel lock Default PIN is 1234 Contact local Service Hotline or send email to our Support via www strong tv Forgotten PIN code Contact local Service Hotline or send email to our Support via www strong tv After moving the receiver to another room area you are no longer able to receive digital reception Antenna signals are too weak Press the INFO button on remote 3x to call up signal bars and adjust antenna for maximum reception or rescan channels Demodulator Demodulator Frequency range Channel bandwidth Video Decoder Profile level Vid
Download Pdf Manuals
Related Search