Home

USER MANUAL

1. Hard disk drives CD DVD Drives and other devices connected via USB cannot be used This unit cannot copy or move files Playable formats FAT12 FAT16 FAT32 Depending on the condition of the USB flash drive this unit might not be able to play the files on it or skipping might occur NTFS HFS and HFS formats are not supported and cannot be used Max number of playable folders 200 Max number of playable files 999 If the USB storage device contains more than 999 files or 200 folders this unit cannot play it back correctly This unit cannot play files that are larger than 2GB Files with variable bit rates might not play correctly File information display The display of this unit can only show single byte letters and numbers f the file information contains Japanese Chinese or other double byte characters playback is possible but the name will not be shown correctly 45 4 8 S co in Q Y Q 4 TEAC TEAC CUSTOMER SUPPORT HOTLINE TCS 1300 553 315 Between Monday to Friday AEST 8 30AM to 6PM
2. Last Memory The Last Memory function can memorize where disc playback was stopped and resume from there when the same disc is inserted again This function can memorize up to 4 discs and is dependent on the disc content Select On to enable the function and Off to turn it off e On Start the memory e Off Remove the memory ia meral Setup F age ov DIE Ey DIEA Sia G ET last Memory 4 9 ae O 2 e gt a Reference 36 10 DVD Operation e Speaker Setup In the Audio Setup page press Y button to select the Speaker Setup option then press OK or gt button play into the Speaker Setup Page pad fh Audio Sietujp Page z TEA i EN STEG E BEWE E ORY nl f lanl Downmix e LT RT Select to downmix multichannel audio soundtracks to LT RT channel output e Stereo Select to downmix multichannel audio soundtracks to stereo output speaker Setup Page ail dal i m ownmix Dual Mono You can select four different audio output STEREO MONOL MONOR MIX MONO The audio out description of these Selections is shown in the table below A udio Setup Paige Jual Mone malme A 4 eal livery sie 37 lt O in Q 2 e A gt Reference 10 DVD Operation Dynamic This option is used to set the compression ratio in order to control the sound Volume
3. NOTE Press CID to view the currently recording file while recording Press eo to play any other recorded files from the Recorded File List lt is not possible to view channels on other frequencies while recording is ongoing The recorded file size depends on the broadcasted content Please make sure your USB storage device has ample space for recording Please do not turn off or unplug the USB storage device during recording This may damage the USB storage device or cause data corruption Recording in Standby Mode Continue recording after turning off the TV Similarly scheduled recording can be done while the TV is turned off in Standby Mode 1 PressCe_ while watching TV to start MEN recording Alternatively gt Record in Bogen i CHANNEL Menu gt Record Start Tum off the screenand continue recording 2 Press to turn the TV off into Standby p recordingan j Mode 3 A prompt will appear Choose whether to continue recording after turning the TV off then press 0x Setting a Record Limit Set a time limit for Instant Recording When the time limit is up recording will stop automatically MENU 1 Press todisplay the OSD 2 Use a to navigate to CHANNEL Menu Free Record Limit and adjust the setting between 1 6 hours 8 3 Time Shift Pause Live TV Pause live TV temporarily and avoid missing part of the TV show even if you are interrupted 1 Press C while
4. T Ca I jF ima La ee mat 1 SCH LIST Press YELLOW to display the Schedule List 2 Press a to scroll up and down the list Scheduled recordings will be marked with a camera icon and viewing reminders with a clock icon EXIT 3 Press to return to TV viewing Deleting a Scheduled Recording Viewing Event 1 While viewing the Schedule List use to select the event to be deleted 2 Press RED to delete the highlighted event 3 Press 4 to confirm or to cancel the deletion 8 5 Using the Recorded File List Press GREEN to access the Recorded File List Any recorded TV programmes will be listed if a USB storage device is connected and powered on Viewing and Playing Recorded Files 1 Press eo to view the Recorded File List Press repeatedly to sort the files by Programme Channel and Time 2 Use to browse the list and select a file Recorded List Program 1 DISPLAY 3 Press to display detailed information on the highlighted file EXIT 4 Press O to show an on screen control bar 5 Press to start playing the selected file NOTE f playback is stopped the track position is remembered and playback will resume from there If the recorded programme is locked because of parental control settings key in the correct password to view it Deleting Recorded Files 1 Press eo to view the Recorded File List then use a w to select a file DELETE 2 Press
5. and press REC LIST i to lock it Press again to unlock eS Na EXIT 6 Press to exit 19 TV amp Electronic Programme Guide Digital Video Recording DVR s ke T ER P 2 gt 6 m DVD Operation Reference 7 TV amp ELECTRONIC PROGRAMME GUIDE EPG Parental Control for Rated Programmes Lock specific TV programmes by rating so that they can only be viewed after using the right password 1 Press C to display the OSD 2 Use 4 gt a v to navigate to LOCK Menu gt Lock Channel and set it to On A password will be required to change this setting See the Password Customisation section for details 3 Use 4 a to select Parental Control and choose a rating limit Programmes with the chosen rating and any ratings beyond it will be locked NOTE Programme ratings depend on availability from the broadcasting service Locked programmes or channels cannot be recorded unless they are already being accessed using the password Please keep this in mind when scheduling recordings TV amp Electronic Programme Guide Digital Video Recording DVR s ke T E9 P 2 PA 3 m S DVD Operation Reference 20 8 DIGITAL VIDEO RECORDING DVR This feature allows the recording of TV programmes to a compatible USB storage device like a hard disk drive or thumb drive While recording is in progress the front panel LED light will flash re
6. TEAC DLEDV3989FHD LED TV USER MANUAL IMPORTANT WARRANTY INFORMATION INSIDE PLEASE READ TEAC WARRANTY PROCEDURE v1 5 2 DEC 2011 Please read the owner s manual carefully and ensure that you have followed the correct installation and operating procedures 1 Please read this warranty card 2 Keep your purchase receipt to enable you to proceed quickly in the event of a Warranty Service 3 If you require Warranty Service please contact the TEAC Customer Support Hotline at 1300 553 315 for assistance Please ensure that you have the model number serial number and purchase receipt ready when you call Please complete the section below and keep this information for your own records Owner s Name Owner s Address Postcode Model Name No Serial No Dealer s Name Dealer s Address Postcode Authorised Service Centres in Major Australian Cities NSW Queensland Western Australia 151 Arthur Street Unit 1 320 Curtin Ave West Unit 2 50 Pilbara Street Homebush West NSW 2140 Eagle Farm QLD 4009 Welshpool WA 6106 South Australia Victoria 11 McInnes Street 282 Normanby Road Ridleyton SA 5008 South Melbourne VIC 3205 Thank you for selecting a TEAC product If you should require assistance with your product regarding its setup or operation or if any difficulties arise please call us directly for advice between Monday to Friday at 8 30AM 6PM AEST at the TEAC Customer Support Hotline
7. If the TV stand or wall mounting bracket is damaged do not use it to support the TV Contact your dealer immediately Ta A Q a S Q g oO 9 S e 2 S e hn d 3 W o gt Digital Video Programme Guide Recording DVR USB Multimedia Playback DVD Operation Reference 2 TV PLACEMENT SETUP TV Stand Installation Removal 1 Place the unit face down on a soft surface Gently position the glass base to the leg at the bottom of the TV 2 3 Fasten the 6 provided screws screw size B4x12F to secure the stand to the TV according to the diagram 4 To remove the stand reverse the steps above Initial Setup amp Input Sources Remote Control OSD Menu Fall Prevention To prevent the TV from tilting forward and falling over to cause damage or injury please secure the TV to your table or wall using screws or eyebolts and strong cord not provided An example on fixing the TV to a table is shown below Pa de a a S Q g Oo 2 S Oo 2 S e hn 3 W o gt s Programme Guide 1 Install a wood screw or eyebolt into the table that is supporting the TV 2 Fix a machine screw into a screw hole near the base in the back of the TV 3 Tie the wood screw or eyebolt to the machine screw with a strong cord Digital Video Recording DVR aa LANA Playback MO es
8. USB Multimedia DVD Operation Alternatively secure the TV to the wall directly behind it by fixing eyebolts to the wall and tying them to screws fixed on the centre of the TV back panel Reference 2 TV PLACEMENT SETUP Wall Mounting 1 Ensure that the selected wall is made of appropriate material and can support the weight of the TV Make sure there are no pipes or cables inside the wall on your chosen position 2 Obtain a suitable wall mounting bracket and mounting eyebolts thread size M4x10 and screws from your local hardware store 3 Place the unit face down on a soft surface 4 Remove the attached leg at the bottom of the TV by removing the 5 screws on the leg cover 5 Refit the cover securely by replacing the 5 screws into their original positions TMM TT Cj i a i 8 N er e GB 33 HKU y Tn i Remote Control 6 Fasten 4 eyebolts into the four screw holes on the TV s rear panel according to the diagram F 7 Fasten the wall mounting bracket using screws onto the wall 5 8 Connect the eyebolts and the wall bracket securely with strong rope e 9 Carefully check
9. for details see the Specifications section TV turns off by itself VE the Timer Sleep and Auto Sleep settings in the TIME The TV may have been set to scan for new firmware at night TV turns on by itself at night Please check the Auto Software Update setting in the OPTION Menu USB device not detected 1 re S 0 in 3 Y Q x 42 11 REFERENCE 11 2 Specifications 1920 x 1080 Input Connector AUDIO L R PC AUDIO HDMI RF HEADPHONE COAX 3 The HDMI support 1 3 the HDCP support 1 1 Output Connecto 100 240V 50 60Hz 100W lt 0 4W PAL BG DK I SECAM BG DK L L 48 25 863 25 MHz 2x12W 75 ohm DVR Recording FAT32 USB Multimedia Playback FAT32 and NTFS Maximum hard disk partition size 400GB USB2 0 See the table on next page WUXGA Maximum supported resolution 1360X768 60Hz 900x210x595 mm 900x88x541 mm e Specifications are subject to change without notice Weight and dimensions are approximate Q S Q i Q Q e4 11 REFERENCE Supported File Formats Max bitrate 6Mbps _ sav Max resolution 1920x1080pixels PICTURE Mono colour 16 colour 256 colour 16 bit 24 bit 32 bit Max resolution 3000 x 3000 pixels Min resolution 100 x 100 pixels Sample rate 8K 48K ia Bitrate 32K 320K Special Notes The Media Unit can only support USB memory devices such as hard disk drives and flash drives and wil
10. make _ sure children do not swallow _ them Keep the batteries out of _ the reach of infants and _ children Ifa child has swallowed a battery seek medical attention _ immediately Do not display still images and partially still images on the LED panel for more than 2 hours as it can cause screen image retention This image retention is also known as screen burn To avoid such image retention reduce the degree of brightness and contrast of the screen when displaying a still image Watching the LED TV in 4 3 format for a long period of time may leave traces of borders displayed on the left right and centre of the screen caused by the difference of light emission on the screen Playing a DVD or a game console may cause a similar effect to the screen Damages caused by the above effect are not covered by the Warranty Displaying still images from Video games and PC for longer than a certain period of time may produce partial after images To prevent this effect reduce the brightness and contrast when displaying still images URS eke BE Remote Control line tan Parts amp Connections Programme Guide OSD Menu p TV amp Electronic Digital Video pel x gt A D g O Q 4 USB Multimedia Playback DVD Operation Reference Initial Setup amp Input Sources Remote Control OSD Menu TV amp Electronic On Screen Display v 2 5 6 o S Ei D 2 a
11. 1300 553 315 teacservicesupport awa com au www teac com au A ky AC WARRANTY INFORMATION v1 5 2 DEC 2011 Our goods come with guarantees that cannot be excluded under the Australian Consumer Law You are entitled to a replacement or refund for a major failure and for compensation for any other reasonably foreseeable loss or damage You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure Warranty Terms amp Conditions 1 TEAC warrants that this product is free from defects in material and workmanship under normal domestic use with reasonable care and skill Maintenance and cleaning i e laser head is not covered by this warranty The TEAC warranty only applies to TEAC products purchased used and serviced in Australia The benefits to the consumer given by this Warranty are in addition to other rights and remedies of the consumer under a law in relation to goods or services to which the warranty relates being the Australian Consumer Law Refund or replacement via your retailer is available for a period of 14 days after purchase for goods that have been inspected and determined to have a major failure Refund and exchange is not applicable for change of mind Subject to the terms herein this warranty effectively covers the equipment as specified in the Warranty Periods Table below from the date of purchase TEAC PRODUCT
12. Hotline Proen Aton in No picture Is the power plugged in Insert the power plug Like your computer the TV runs diagnostic and software checks before it can display broadcast channels The picture should appear in approximately 15 seconds Picture is too Sea asta or too dark Vaasa picture brightness or contrast settings Picture is too Picture is too large or too small or too small Adjust the aspect settings the aspect settings Picture shakes and stripes appliances that emit magnetic radiation away from the appear Press the PAUSE button Check if playback is on Pause Picture does not move pia any other equipment Check if the MUTE function is on Adjust the volume level Check the connection of the audio input cables Check all other input connections The picture appears too slowly after the power is turned on Has picture but no sound Check if the AC power connection is switched on Check that the battery installation is correct Remote control does not work Remove any obstacles between the TV and the remote control If the batteries are flat replace them with new ones Video compression may cause distortion especially in scenes Distorted picture with fast action Weak reception may cause distortion and is not a TV issue please have the antenna assessed Check the connection to the USB device Please ensure that the device is compatible and the multimedia data formats are supported
13. O REPEAT Toggle Repeat options in USB Mode ee ecm ce No function for this model gt Play Pause playback or toggle DTV Time Shift E Stop playback 4 Fast Rewind Fast Forward up to 16x M Previous next chapter track D MENU Function not available with this model D TITLE Function not available with this model PICTURE SOUND SLEEP ASPECT Teletext operation Teletext is an information system broadcasted by certain channels providing news weather forecasts puzzles as well as subtitles Subject to availability from broadcaster SUBPAGE Toggle subpage HOLD Hold or resume browsing the subpage SIZE Cycle through page zoom in views pan INDEX Go to Index CANCEL Cancel the Teletext Display nrn an REVEAL Reveal any hidden text TV TXT Toggle Teletext viewing modes Colour buttons Shortcut keys per on screen hints D SETUP D MENU D TITLE TV TXT CANCEL REVEAL REPEAT a gt il E gt ER Ga GE D SETUP Function not available for this model GOTO Jump to a specific point during playback by keying numbers in the format HH MM SS A B Define Points A and B for looping playback Press once for A again for B a third time to cancel looping ASPECT Cycle through different picture aspect settings by TEAC pressing this button repeatedly SLEEP Cycle through and set Timer Sleep settings by pressing this button repeatedly DELETE REC LIST SCH LIST SCREEN 5 2 Battery Installation CAUTION To prevent dam
14. be drawn into the disc tray by pressing the EJECT button again The disc must be manually pushed into the tray until it is drawn in automatically Reflective side NOTE DVD mode must be selected before inserting the disc The contents of each disc may vary as to how the disc was authored and what features are included Some discs have an autoplay function Some offer different modes such as Menu Play Sequence Play and other modes as illustrated below Menu Play Compatible with DVD SVCD or VCD2 0 2 lf the disc is a DVD a ROOT MENU will appear on the screen If it is SVCD or VCD 2 0 please press the Menu button to see the menu 3 When a DVD disc is loaded use the toggle buttons to highlight the menu item you would like to choose With SVCD or VCD 2 0 press the numeric buttons to select a track to play Press OK or Play to start when highlighted Return to Menu when Playing When playing a DVD disc press the Menu button to return to the ROOT menu When playing a SVCD or VCD and Playback control PBC is on press the Menu or Return button to return to the disc menu S g in 8 Q Oo 2 gt a Reference 30 10 DVD Operation Title Play DVD disc dependant only according to DVD manufacturer specifications During DVD playback press Title button to display the DVD title content and main menu Press the V buttons to highlight t
15. replaced at the sole judgement of TEAC The warranties hereby conferred do not extend to and exclude any cost associated with the installation deinstallationor re installation of a product be it in home or otherwise including costs related to the A De Baa mm ee iea ee es e eo a a a O oa i USB Multimedia Playback b 44 gt gt Previous next Page M4 gt gt I Previous next text document E Stop viewing the text document S g in 8 Q Oo 2 gt a Reference 9 USB MULTIMEDIA PLAYBACK Movie Playback In the USB Menu choose Movie Playback with 4 and press 0x Add movie files to a playlist by following on screen hints for button controls 1 2 3 Press CID to start playback Press E to see the Movie Playback control bar 4 Press 4 and 0x to use the buttons on the bar NOTE f playback is stopped the track position is remembered and playback will resume from there Select between Repeat All Repeat One Repeat None Press once to set Point A and again to set Point B for looping playback Press again to resume normal playback Press to navigate into the current playlist Use and to choose a A SCH LIST Playlist specific image Press to remove a highlighted file from the list or REC LIST EXIT to remove all files Press to return to the control panel Info Display detailed video information Use the on screen IP button to toggle slow motion playb
16. settings with 4 a and press 0x to start tuning 6 After tuning is complete the TV will display programmes from detected channels is Go nN NOTE If no channels are detected please check the connection and condition of your external antenna 4 2 Selecting an Input Source To play different media types and from any connected external device change input sources to activate the desired connection se Source 1 Press O to display the list of input sources 2 Press to choose an input source 3 Press 0k to confirm DTV USB DTV and USB can also be accessed using This TV starts in DTV mode by default when it is switched on for the first time Subsequently it will start in the most recently selected input mode NOTE Please make sure the device is connected i S Move Select E eni before selecting the input source v 10 5 REMOTE CONTROL The remote control uses Infrared signals Point it at the Infrared sensor at the front of the TV NOTE The remote control may not work correctly if it is operated out of range or angle of if there are objects blocking the signal 5 1 Remote Control Buttons and Functions O aaa E POWER Switch the TV on or off Standby mode e a a eee DTV USB Switch to DTV USB Mode INPUT Access the Input Source Menu PICTURE Cycle through preset picture profiles SOUND Cycle through preset sound profiles DELETE Delete files from the Recorded File List RE
17. C LIST Display the Recorded File List SCH LIST Display the Schedule List SCREEN 1 While playing music turn off the screen 2 In HDMI Mode change between Video and PC Overscan Modes 3 In PC VGA Mode auto align the screen Remote Control OSD Menu MENU Switch the TV on or off Standby mode eee SUBTITLE Choose from available subtitles AUDIO Choose from available audio tracks EPG Access the Electronic Programme Guide panne pan DISPLAY Display detailed information or controls a wv 4 gt Directional navigation buttons Ds O ee DY ENO D TITLE OK Confirm a setting CH Browse next previous channel an a putas VOL Adjust volume level g EXIT Exit menu or return to last level Be eas is MUTE Toggle audio output muting 44 P gt 44 PP Number Buttons Key in numbers to view channels or DELETE REC LIST SCH LIST SCREEN other option inputs Return to the most recently viewed TV channel CH FAV Show Channel List then Favourite Channels List TV amp Electronic On Screen Display J 5 oO o z G be o a Digital Video Recording DVR USB Multimedia Playback TEAC 0118020315 DVD Operation Reference Remote Control OSD Menu TV amp Electronic On Screen Display Programme Guide Digital Video Recording DVR fe 3 E ES x2 5 gt m N DVD Operation Reference 5 REMOTE CONTROL REC Start recording when in DTV Mode
18. Digital Video Recording DVR USB Multimedia Playback DVD Operation Reference 1 SAFETY PRECAUTIONS 1 4 Important safety Instructions Warnings and Precautions To prevent any injuries the following safety precautions should be observed in the installation use servicing and maintenance of this device Please read this manual carefully and keep it for future reference ae ee 10 11 12 13 Read these instructions Keep these instructions Heed all warnings Follow all instructions Clean only with a dry cloth Do not block any of the ventilation openings Install in accordance with the manufacturer s instructions Do not install near any heat sources such as radiators heat registers stoves or other devices including amplifiers that produce heat Do not defeat the purpose of the polarized or grounding type plug A polarized plug has two blades with one wider than the other A grounding type plug has two blades and a third grounding prong The wide blade or the third prong is provided for your safety If the provided plug does not fit into your power outlet consult an electrician to replace the power socket Do not bend the power cord excessively Prevent the cord from being walked on or pinched by weights placed on it Only use the attachments accessories specified by the manufacturer Use only with a cart stand tripod bracket or table specified by the manufacturer or sold with the devi
19. ECT amp button on the remote control DVD Setup Mode e Setup Mode provides the menu for the configuration of General Setup Page Audio Setup Page Dolby Digital Setup Preference Page e Item selection in the Setup Menu is done by using the Navigation Arrows SETUP button and the OK button e Press the SETUP button first enter into SETUP menu then press the DIRECTION RIGHT button you can enter into the next Sub menu e Press the SETUP button again to exit the Setup Menu General Setup TV Display DVDs are produced in a variety of screen aspect ratios This menu enables you to select one of the three a spect ratios 4 3 PS Normal e 4 3 LB Normal e 16 9 Wide Select the most appropriate aspect ratio for the DVD being viewed EY eneral Setup Piaqge iV Display SBD Ben ERE SA EENE EEG GOREA 35 o ww in O 2 e gt a Reference 10 DVD Operation OSD Language This is used to select the OSD language bag Gemeral Setup Page ery a ey A e TRA OSD Lang EAEG tHe Cole Liaisit Mi imiornys Screen Saver Enable the screen saver the screen saver image will appear when the player stops or the picture is frozen for a few minutes Screen saver will prevent image burn and screen damage e On Start the screen saver e Off Remove the screen saver Bisip lawl OSB EENE Screen Saver LKiaisit Milelmic try
20. Multimedia Files 10 DVD Operation 10 1 DVD Operation 11 Reference 11 1 Troubleshooting 11 2 Specifications 11 3 USB Usage Precautions AOU N gt Q O J 10 10 11 12 13 13 15 26 26 30 41 42 43 45 1 SAFETY PRECAUTIONS 1 1 Power Supply Q 5 G 5 4 Q gt o_O DO NOT touch the power DO NOT use a damaged D NOT plug several devices Insert the power plug fully into plug with wet hands _ power cord or plug or a _ into the same outlet _ the outlet ao loose outlet a _ A congested outlet may cause e A loose or improperly e Doing so may result in Doing so may result in _ the outlet to overheat and start inserted power plug electric shock fire or electric shock a fire may result in fire Parts amp Connections T o 2 5 ww O 72 T 2 E Input Sources DO NOT bend the power cord excessively or place heavy objects on it E S Doing so may result in fire or electric shock S A 2 ae lt b so a 58 ae fs gs S 6 SE y Cautions ui E ke 5 r l When disconnecting the _ Always unplug the unit before q power cord from an AC cleaning outlet always grasp it by The purpose of these precautions is to ae the plug __ Not doing so may result in a _ fire or electric shock ensure user safety and prevent property Se e Pulling on the cord damage can damage the internal wire an
21. WARRANTY PERIOD LED LCD TV 32 80 cm and above 1 Year In Home Service Pick up Available All other TEAC products 1 Year Carry in Service 10 11 12 13 14 15 In Home Service Pick up Service This service will only be provided as part of this warranty if all the following conditions are met a The product is indicated in the Warranty Period Table b The product is within the warranty period c The product is located within the normal service area of the local TEAC Authorised Service Centre If TEAC determines that the product is not repairable on site TEAC can complete the repair by taking the product to a TEAC Authorised Service Centre Carry in Service Where In Home service Pick up is not available the purchaser is required to send the product to the nearest TEAC Authorised Service Centre for repair In this event proof of purchase is required to support a warranty claim After the repair the product will be available for collection by or return to the purchaser at a fee upon request TEAC in home service can be made available at a fee upon request A 12 month replacement warranty is applicable to all Accessories such as Remote Power Adaptors and Cables TEAC will ensure to the best of its abilities that all required parts are made available for any required service repair TEAC Australia Pty Ltd and its Authorised Service Centres will use their best endeavours to complete product repairs within a re
22. a fire place or space heater Dd ae _ The excessive heat can melt _ BOING SO POSES a Serious TISK the insulation and expose live _of overheating and a possible fire wires resulting in fire or electric _ outbreak e Doing so poses a serious risk shock of overheating and a possible fire i outbreak A Be sure to place the unit on a level surface g _ E Do not cover the unit with a tablecloth curtain or other material e Insufficient ventilation may result in the unit overheating which may cause a possible fire outbreak Install the unit at an adequate distance from the wall to ensure sufficient ventilation Insufficient ventilation may result in the unit overheating which 2 may cause a possible fire outbreak a The following precautions are divided into Warnings and Cautions E DO NOT place the unit on an unstable _ surface such as a sloped table or any _ stand with a contact area smaller than _the bottom surface of the unit stand _ Placing the unit on a flat stable surface _can prevent accidents from happening _ Ignoring this precaution may result in the unit toppling over and causing injury A ia Install the antenna away from high voltage power lines and communication cables Make sure itis installed securely _ If the antenna to
23. ack at different Slow Fwd speeds To resume normal playback press OID Step Fwd Use the on screen Pl button to step forward within the track in small time increments GOTO Key in a specific point to jump to using the HH MM SS format Musical Photo Text Slideshow Play music while viewing images or text 1 In the USB Menu choose Music Playback with 4 gt and press 0x 2 Add music files to a playlist by pressing on a highlighted file For details on adding files to playlists please see the Making a Playlist section EXIT After the music playlist is done press to return to the USB Menu Choose Photo or Text Playback with 4 gt and press Add the desired image text files to a playlist Playback So ST E m D 5 DVD Operation Press CID to start displaying the images text DISPLAY Press O to display the on screen control bar Start simultaneous music playback by choosing the Music button in the control bar ON O OR Reference 29 10 DVD Operation Preparation Connect the unit to the power supply and press the POWER button to switch the unit on 2 Press the INPUT button on the remote control to select DVD mode and press OK to select DVD mode 3 Gently insert the disc with the label side away from the television into the disc tray slot The disc will be drawn into the disc tray and loaded automatically 4 Press the EJECT button to eject the disc The disc cannot
24. acks Turn on off automatic programme volume control Turn Surround Sound off on Select between Off PCM and Auto Set the current time In DTV Mode the time is set according to broadcaster signals and cannot be changed Set a time of day and frequency for the TV to turn off Set a time of day and frequency for the TV to turn on Set the TV to turn off after a certain amount of time Set the TV to turn off after it has not received any control signals for a certain amount of time Select the time zone Set the language for the OSD Menus Select the 1 72 preferred language track to be selected if it is available from the broadcaster Select the 1 2 preferred language track to be selected if it is available from the broadcaster Adjust the time needed before the OSD Menu auto hides Turn on off the blue screen display during No Signal Shows current country that was set during Auto Tuning Turn automatic software update on if you wish the TV to automatically scan for new firmware updates at night Reset all settings to factory defaults All channels and personalised settings will be erased Adjust backlight settings Display detailed information or controls Set channel programme locking on off with a password Change the password Password lock all programmes from chosen TV channels Password lock all programmes at and beyond a chosen programme rating OSD Menu TV amp Electroni
25. age to the remote control make sure to install batteries correctly Do not mix old and new batteries Dispose of batteries safely and appropriately Contact your local authorities or dealer for advice on battery disposal Keep batteries out of reach of children 1 To open the battery compartment press on the battery cover and slide it out 2 Insert 2 AAA batteries making sure to match polarities as marked in the compartment 3 Close the battery cover 12 6 ON SCREEN DISPLAY OSD MENU 6 1 OSD Menu Overview The OSD menu system acts as the Main Menu and allows access to main feature controls as well as optional user settings NOTE Certain menus are available only in their relevant input modes Main menu CHANNEL PICTURE SOUND TIME OPTION LOCK Submenu Channel menu for example Hint you should operate the OSD menu according to the hint Navigating the OSD Press S to display the OSD Use 4 gt to navigate to different menus via the tabs at the top Use w to enter a menu and select available settings or submenus Use 4 gt or press on a selected item to adjust settings or enter a submenu Press or 4 to confirm a setting and continue browsing the menu If you have entered a submenu please follow the hints at the bottom of the screen or refer to the relevant sections in this user manual for operation details he al aa ha MENU i EXIT 6 Press again to exit the menu or to e
26. and Alternatively opt to mount the TV on the wall by obtaining a wall mount bracket and mounting eyebolts screws thread size M4 x 10 from your local hardware store For best results we recommend that wall mounting should be performed by a professional installer Initial Setup amp Input Sources NOTE The TV should be levelled or angled directly at the viewer s eye Allow a space of 10cm around the TV to reduce risk of overheating Do not force the TV to turn as this will damage the stand Remote Control OSD Menu CAUTION Make sure the TV is completely disconnected and unplugged from power To prevent damage to the TV screen avoid touching or pressing on the screen with hands or objects at any time Do not press on the front panel as it may damage the screen To protect the TV from damage or scratching only place the TV on a soft flat surface like a table covered with a cotton towel or foam mat Assembly lifting and moving of the TV must be done by at least 2 people to prevent unit damage or physical injury from accidents Ensure that all screws are tight and secure after assembly so that the stand or mounting bracket is stable enough to prevent the TV from falling and Causing personal injury or property damage Make sure that the TV is not knocked or pulled down from its position Prevent children and pets from playing with or climbing on the TV If the TV falls it may Cause personal injury or property damage
27. asonable period based on available resources and workload during the time when service is requested and performed Refurbished parts may be used to repair the product In the case of a replacement the product may be replaced with a refurbished unit of the same type or if one is unavailable a similar refurbished model with equal or better features amp specifications Please be advised that if the product presented for repair is capable of retaining user generated data the data may be lost during servicing Customers are strongly encouraged to back up all important information data before sending the product in for service repair Service will be provided only during normal business hours and under safety conditions and circumstances TEAC and its authorised service agents can refuse any repair if safety in relation to OH amp S becomes a concern to its staff or authorised service agents personnel The warranty is void and warranty claims may be refused subject to the Australian Consumer Law if a The product was not transported installed operated or maintained according to manufacturer instruction or b The product was abused damaged tampered altered or repaired by any unauthorised persons or c Product failure is due to accidents during use installation or transit power surges use of defective or incompatible external devices exposure to abnormal conditions such as excessive temperatures or humidity or entry of liquids obj
28. ay through the process DTV Manual Tuning Scan a specific DTV frequency and save detected channels into the Channe nel List 1 Press and navigate to the CHANNEL DTV Manual Tuning Menu 2 Use a and KX to select the DTV Manual Tuning option 3 Use 4 gt to select a DTV channel 4 Press 0K to start scanning ATV Manual Tuning Scan a specific ATV frequency and save detected channels into the Channel List MENU 1 Press and navigate to the CHANNEL Menu Use a and 0x to select the ATV Manual Tuning option Use a 4 gt to adjust scanning options Press to start scanning ae N DELETE Press to save any changes 16 7 TV amp ELECTRONIC PROGRAMME GUIDE EPG 7 2 Electronic Programme Guide EPG While using DTV Mode press O to display the EPG EPG is not available in ATV Mode Program GUDE OT mec 2003 17L 160 07 De 2005 Sy m i piibiags TCO 16151829 Leits 100 1 tda 1 138 EIE oSe 2000 FST Tabe Moder Eri uisttuwuurlet i Browsing the EPG 1 Change channels using to navigate and press to tune into a highlighted channel 2 View channel guides when tuned in to the relevant channels by using a 4 gt 3 Browse channel schedules up to 7 days in advance with 44 and O gt MENU EXIT 4 Press or to exit the EPG NOTE You need to tune in to a channel before its schedule is displayed EPG schedules are available up to 7
29. ble while the files on the disc are being played DVD Display feature When the DISPLAY button is pressed repeatedly while a DVD is being played the response will show as follows Disc Type Title Title being played Total number of titles Chapter Chapter being played Total number of chapter Time Elapsed time of disc playtime Language Language selection Number of optional languages Language Type Audio Type Subtitle Subtitle selection Number of optional languages Angle Angle being played Number of playing angles Disc Type Title Title being played Total number of titles Chapter Chapter being played Total number of chapter Time Countdown of chapter time Disc Type Title Title being played Total number of titles Chapter Chapter being played Total number of chapter Time Title elapsed time Disc Type Title Title being played Total number of titles Chapter Chapter being played Total number of chapter Time Countdown of total time SVCD Display feature When the DISPLAY button is pressed repeatedly while a SVCD is being played the response will show as follows e Disc Type Track Track being played total tracks Mute PBC Repeat Mode Elapsed Time e Language Language being played Total Number of languages Language Type Audio Type Subtitle Subtitle being played Total number of subtitles VCD Display Feature When the DISPLAY button is pressed repeatedly while a VCD is being played the
30. c On Screen Display USB Multimedia Digital Video Playback Recording DVR Programme Guide DVD Operation Reference TV amp Electronic Programme Guide Digital Video Recording DVR 5 mo T HE o 3 A m S DVD Operation Reference 7 TV amp ELECTRONIC PROGRAMME GUIDE EPG 7 1 ATV DTV Mode INPUT Start watching TV by pressing to switch to the ATV Analogue TV or DTV Digital TV input source For detailed steps on changing inputs please see the Input Source section ATV and DTV depends on the broadcasting services available in your locality The quality of received channels depends on the strength of the signal reception in your location We recommend using an external antenna connection to receive channels Tune to TV channels using Auto Scan or Manual Tuning Auto Tuning Run a complete scan for channels and save all detected channels into the Channel List MENU l 1 Press and navigate to the CHANNEL Menu Auto Scan 2 Use a and toselect the l Auto Tuning option Country Australia 3 Use 4 to adjust Country ne Type 4 ATV DTV and Tune Type options 4 Press CK to start scanning TPE jai NOTE Auto Tuning will overwrite all previously saved channels and channel settings Ifthe ATV DTV option is selected the first 50 of the scan represents ATV tuning while the other 50 represents DTV tuning Press O if you wish to stop tuning halfw
31. ce When a cart is used use caution when moving the cart and device Unplug this apparatus during lightning storms or when unused for long periods of time VAa Refer all servicing to qualified service personnel Servicing is required when the apparatus has been damaged in any way This symbol indicates that dangerous voltage instituting a risk of electric shock is present within this device This symbol indicates that there are important operation and maintenance instructions in the documentation accompanying this device NOTE To prevent damage which may result in fire or hazards do not expose the device to rain or liquids Do not place objects containing liquids such as vases on the device If drinks and liquids have been spilled on the device unplug the device from AC power immediately and contact the TEAC Customer Hotline for assistance Servicing of this device should be conducted by qualified and certified TEAC service personnel The manufacturer will not be held responsible for any damage caused by modifications done on the device without authorisation from the manufacturer s authorised service agent 2 TV PLACEMENT SETUP 2 1 Accessories The appearance of the components may look different from the following figures User s Guide 1 User s Guide Remote Control 2 x AAA Battery Quick Start Guide Contact Card 2 2 TV Stand Wall Mounting Assembly This TV comes ready to be set up with the provided TV st
32. contrast ES dn A udio Setup Page Wee alkieln sods yll WASA TEETE E o 4 lynamic i AKANI C Preference Setup 2 TV Type This menu enables you to set the picture format for your TV DVD NTSC This formatis used by some other countries e g USA PAL This is the format used in Australia and the default setting AUTO This format can be used if your TV DVD is Apane of both PAL and NTSC formats bad Ch Preference ee OS TY Type Siujbititle Eme NTSG HHG Momi Eng Plaine mitialll is Flalsisi wio tiad Vel fia ht Select to downmix multichannel audio soundtracks to stereo output Audio Choose a preferred language track to be played if it is available on the disc If it is not available the default language will be played ference Page ZS A udi Siuibititlie Emme ents Wil iil Flalmelnitiall Plalsisiwiond OKEE f 4 9 ae O 2 e gt a Reference 38 10 DVD Operation Subtitle Choose a preferred subtitle language to be used if it is available on the disc If it is not available the default language will be used Ti W Miydi aN UE E Subtitle Bee AGEA Plalmeinitiall PEA Circe DEEE Disc Menu Choose a preferred menu language to be used if it is available on the disc If it is not available the default language will be used Preference bv iyi pre NU te fits SIU Bittle Disc Menu Flalmelnitiall EAM E
33. d and green WARNING NEVER remove a connected USB storage device while still recording NOTE USB devices such as mobile phones MP3 players and cameras do NOT support file recording Recorded file sizes depend on the broadcast content up to several GB per hour For best recording and playback results we recommend using a USB storage device with A Data storage capacity up to 1 5TB B Maximum disk partition size 400GB C An external power supply D Maximum USB extension cable length 50cm 8 1 Setting up for USB Recording 1 Connect the USB storage device to the USB port on the back panel of the TV If the USB storage device uses its own power supply make sure it is turned on MENU Press to display the OSD Use a to navigate to CHANNEL Menu gt DVR File System and press to access the setup options in the DVR File System Menu as described below DVR File System aw N Selecting a Disk Drive and Checking Compatibility Select a desired USB storage device for recording if multiple devices are connected Then check if the connected USB storage device is compatible and ready for recording 1 Select a disk drive using the Select Disk option 2 Select Check DVR File System in the DVR File System Menu and press 0K 3 One of the following messages will appear SUCCESS for a compatible device and FAIL for an incompatible device Digital Video Recording DVR NOTE This TV w
34. d may result in a fire Be sure to read and observe all safety precautions Playback It is the responsibility of the user to make sure all precautions and warnings are heeded and followed USB Multimedia p j DVD Operation Reference TV amp Electronic gg Remote Control naide EEA Parts amp Connections Digital Video USB Multimedia DVD Operation Reference OSD Menu Programme Guide pel x gt 2 D E O Q x Playback 1 SAFETY PRECAUTIONS 1 2 Installation DO NOT place the unit where it is exposed to rain excessive or combustible materials near the unit DO NOT place containers with DO NOT use or store flammable liquids such as vases drink cans bottles or small metallic objects moisture or grease on top of the unit _ Doing so may result in fire _ or explosion e Doing so may result in fire _ electric shock malfunction e If liquid enters the unit or any 2 or deformation metal object falls into the unit it may result in a short circuit fire or electric shock og DO NOT place a burning candle DO NOT place the unit in a poorly DO NOT run power cords near burning incense or lighted ventilated enclosure such as a _ heat producing appliances such cigarette on top of the unit cabinet _as radiators stoves or irons DO NOT place the unit near any heat source such as
35. days in advance from the broadcaster While a future programme is highlighted press ry RED to schedule automatic timed recording or press GREEN to schedule a viewing Please see the DVR section for detailed instructions 7 3 Channel Customisation TV amp Electronic Programme Guide Make personal changes to the channel list in the Channel Edit menu Different options are available for ATV and DTV channels Press S to display the OSD Use w to navigate to CHANNEL Menu gt Channel Edit and press 0k If password locks are enabled key in the password to enter the Channel Edit menu Customise your channels according to the instructions below Digital Video Recording DVR Press oO again to exit the menu or G to exit the OSD completely A a a i s x T ES o gt T m N d ar a a TLE THI EYLE Fat E TLEH O TLE Trma i VLE PITI a YLEG 5 TLE DVD Operation ETLE NE Reference a CTET F e SIF Bers 17 TV amp Electronic Programme Guide Digital Video Recording DVR s ke T E9 P 2 PA 3 m S DVD Operation Reference 7 TV amp ELECTRONIC PROGRAMME GUIDE EPG Favourite Channels 1 Use a w 4 gt to highlight a desired channel 2 Press to mark it as a Favourite Channel This channel will now be listed in the Favourite Channel List 3 To remove it from the list press again to remove the Favourite mark Skip Cha
36. dio signal input for AV shared with YPbPr J CAUTION Make sure that the TV is completely disconnected and unplugged from power before making or changing cable connections Make sure that the power output from your power source matches the power input labelled on the TV adapter Initial Setup amp Input Sources Remote Control OSD Menu Ta A Q a S Q g oO 9 S Oo A S e hn d 3 W o gt USB Multimedia Digital Video Playback Recording DVR Programme Guide DVD Operation Reference Initial Setup amp Input Sources Remote Control OSD Menu a amp a A a S 3 9 oO MA S Oo 2 S e Ps 8 W amp B gt USB Multimedia Digital Video Playback Recording DVR Programme Guide DVD Operation Reference 4 INITIAL SETUP amp INPUT SOURCES 4 1 Initial Power On When the TV is turned on the first time out of the box or after a factory settings reset it will prompt you to run auto channel tuning Connect the TV to your antenna wall socket using a coaxial TV cable After making sure all connections are secure plug in the power cord and turn on AC power Press on the remote control to turn on the TV The TV will initialise and prompt you to choose between Home Mode and Shop Mode Home Mode is recommended for optimal energy saving Choose with 4 gt a v and press 0x to proceed 5 Next a tuning menu will display Adjust the
37. ects or creatures into the product No one is authorised to assume any liability on behalf of TEAC or impose any obligation on it in connection with the sale of any equipment other than as stated in this warranty and outlined above TEAC reserves the right to inspect and verify whether the product is exhibiting a major failure as claimed by customers retailers LCD dead pixel policy please contact TEAC Customer Support Hotline on 1300 553 315 for assistance TABLE OF CONTENTS Safety Precautions 1 1 Power Supply 1 2 Installation 1 3 Use and Maintenance 1 4 Important Safety Instructions 2 TV Placement Setup 2 1 Accessories 2 2 TV Stand Wall Mounting Assembly 3 Parts amp Connections 3 1 Front View 3 2 Back View 4 Initial Setup amp Input Sources 4 1 Initial Power On 4 2 Selecting an Input Source 5 Remote Control 5 1 Remote Control Buttons and Functions 5 2 Battery Installation 6 On Screen Display OSD Menu 6 1 OSD Menu Overview 6 2 Menu Map 7 TV amp Electronic Programme Guide 7 1 ATV DTV Mode 1 2 Electronic Programme Guide EPG 73 Channel Customisation 7 4 Channel List and Favourite List Ta Password Lock for Channels and Programmes 8 Digital Video Recording DVR 8 1 Setting up for USB Recording 8 2 Instant Recording 8 3 Time Shift Pause Live TV 8 4 Scheduled Recording Viewing Reminder 8 5 Using the Recorded File List 9 USB Multimedia Playback 9 1 Connecting the USB Storage Device 9 2 Playing
38. es in its purpose for different disc types Press the AUDIO button to display the current Soundtrack being played Audio Selection for SVCD or VCD There are five audio selections available Stereo L R L L R R L L Auto A D Detect and R R Auto A D Detect With each consecutive press of the button the audio selection cycles through these options For example if you press the button six times the audio selection cycles back to Stereo Audio Selection for CD HD CD WMA Digital Audio Discs There are three selections available Stereo L R L L and R R Audio Selection for DVD and SVCD When playing a DVD or SVCD disc press the AUDIO button to display the current audio language Press the button again to browse and select the next supported audio language NOTE Certain DVDs have limited language selections or none at all Subjective to manufacturer specifications 34 10 DVD Operation Basic Operation Press the Power button on the TV or the remote control then press the INPUT button to select DVD mode If there is no disc in the DVD player the screen will show NO DISC Insert a disc with the label facing the correct direction according to the picture next to the disc slot Do not touch the disc s reflective surface Hold the disc at the edges with your fingers and gently place the disc into the slot The player will automatically draw the disc into the player To eject the disc press the EJECT button on the TV or the EJ
39. he title you would like to choose and press OK you can also opt to press the numeric buttons 4 The DVD player begins with the chapter 1 of the chosen title Sequence Play 1 Compatible with DVD SVCD VCD CD HD CD WMA Digital Audio disc JPEG discs 2 When a SVCD or VCD disc is loaded and playback control PBC is on press the MENU button once to switch PBC off The player can now playback in sequence mode To turn PBC back on press the MENU button again 3 When the disc is stopped press the Play button to start play back in Sequence mode This is for all compatible discs except VCD and SVCD Additional operations Selecting Tracks Compatible with DVD SVCD VCD CD HD CD WMA Digital Audio disc JPEG discs 1 When playing a DVD disc press the numeric buttons on the menu or title page to select tracks During DVD playback you can input desired title numbers directly 2 During sequence playback of a SVCD or VCD disk press the numeric buttons to select tracks During Program Playback and when the playback control PBC is on you can only press Prev M4 Next PH button to select 3 As for CD HD CD discs press Numeric buttons directly to select tracks When playing WMA Digital Audio disc JPEG discs press Numeric buttons to select different tracks on current track list Skipping Tracks Compatible with DVD SVCD VCD CD HD CD WMA Digital Audio disc JPEG discs 1 To skip forward to the beginning of
40. ill always use the first partition C for recording purposes If your hard disk contains more than one partition please use the first partition for recording purposes Failure to identify the File System may also be due to insufficient memory space on the storage device or a faulty USB cable Try another USB storage device with a larger capacity or another USB cable f no device is connected this detail will be greyed out Playback So Ss m D 5 DVD Operation Formatting a Disk You may need to format the USB storage device for reasons such as A The device is currently in an incompatible format B The device s file system is damaged and needs to be rewritten via formatting C You wish to wipe all data from the device to begin again with an empty drive Reference 21 Digital Video Recording DVR Playback os xo t m D 5 DVD Operation Reference 8 DIGITAL VIDEO RECORDING DVR Formatting will ensure that the USB storage device is in the FAT32 file system and that there is enough storage space available for recording programs CAUTION Formatting will erase ALL data on the storage device Please back up all valuable data before proceeding to format TEAC is not responsible for any lost data due to formatting 1 Select the disk drive to be formatted 2 Select the Format option in the DVR File System Menu and press 0x 3 Select the FAT32 o
41. l not support multimedia devices such as mobile phones and cameras for recording purposes The unit will only support hard disk drives with additional power supply a maximum disk partition size of 400GB and a maximum capacity of 1 5TB For best performance we highly recommend that a hard disk drive with an external power supply be used for larger capacities The maximum number of files that each folder can use is 5000 files When using external USB it is suggested that high quality of USB extension cables supported 480mHz be used to ensure smooth video file playback The TV unit can only support audio formats of single and binary channels 1 re S 0 in 3 Y CD x 44 11 REFERENCE 11 3 USB Usage Precautions Never turn the unit off or disconnect a USB Storage Device Flash Drive when it is being accessed Doing so could damage the TV and the connected USB storage device Do not use a device that has a maximum current consumption of 100 mA or more Do not use a device that has security functions or other special functions Do not use a device that is divided into two or more partitions A USB hub cannot be used to connect USB devices to this unit USB storage devices that can be played on this unit Only USB Storage Device Flash Memory maximum 16GB can be used Do NOT use a high capacity USB hard disk with this unit Some flash memory players that charge from USB terminals cannot be used for playback
42. mages Music for audio Movie for videos and Text for text files 2 Use a v in the list to select the device you wish to play from and press 0x Choose the Return icon to return to the main USB 3 Use 4 a v to navigate to desired files and folders Press on highlighted folders to view folder contents and choose the Up Folder icon to return to the previous folder level 4 Press CID to start playing the current highlighted file Normal playback controls such as Pause Fast Forward and Fast Rewind are available DISPLAY 5 Press O or during Photo and Movie file playback to display a control bar for more playback controls NOTE Depending on the file content some files may not play even if they are in a supported format 26 9 USB MULTIMEDIA PLAYBACK Making a Playlist 1 2 3 4 While browsing files follow the on screen hints for button controls Add a file to a playlist by pressing on a highlighted file and checking its checkbox Repeat this action on other files to add them to the playlist Remove individual files from the playlist by unmarking the checkboxes with 0x Alternatively press GREEN to select or unselect all files in the folder Press CID to start playing the highlighted file Photo Playback 1 2 3 4 In the USB Menu choose Photo Playback with 4 gt and press 0x Add image files to a playlist by following on screen hints for button controls DISPLAY Pre
43. n Mute press CD to turn off the screen while continuing to play music Text Display 1 In the USB Menu choose Text Playback with 4 gt and press 0x 2 Add text files txt to a playlist by following on screen hints for button controls 3 Press CID to display text files in full screen Press 4 gt and 0x to use the Text Playback control bar Where In Home service Pick up is not available the purchaser is required to send the product to the nearest TEAC Authorised Service Centre for repair In this event a copy of this warranty card and a copy of your receipt of purchase must be enclosed to be a valid warranty Such equipment or part must be sent freight prepaid to your nearest TEAC Authorised Service Centre After the repair the product will be available for collection by or return to the purchaser at purchaser s cost The warranty does not cover freight or insurance In all cases of transit damage or lost a claim must be filed against the carrier by the purchaser even if shipment is arranged by TEAC TEAC inhome service may also be available at a fee upon request Accessories Remote including power adaptors AV box TV tuners etc are warranted to be defect free for 1 year Replacement of spare parts under normal usage except cabinet front panel knob removable accessories battery consumable AC cord connecting cord and other accessories are warranted as specified in Warranty Periods Table and will be repaired or
44. nnels 1 Use a w 4 gt to highlight a desired channel 2 Press oe BLUE to mark it to be skipped This channel will now be skipped when you browse TV channels with amp It will still be accessible from the Channel List and EPG 3 To remove the channel s Skip status press oe again to remove the Skip mark Delete Channels 1 Use a w 4 gt to highlight a desired channel DELETE 2 Press RED to delete it 3 Press 4 to confirm or to cancel the deletion NOTE To add a deleted channel into the list again you will have to scan for it via Auto or Manual Tuning See the Tuning section for detailed instructions Rename Channels This feature is only available for ATV channels DTV channels cannot be deleted 1 Use a w 4 gt to highlight a desired channel 2 Press GREEN to start renaming and use a w 4 gt to enter the new channel name Move Channels 1 Use a w 4 gt to highlight a desired channel 2 Press oe YELLOW to mark it to be moved then use w to move it to a desired position SCH LIST l 3 Press again to confirm the new position 7 4 Channel List and Favourite List Use the Channel List and Favourite Channel List to change channels with ease 1 Press to display the Channel List 2 Press a second time to display the Favourite Channel List 3 Use a to select a channel and to tune into the channel 18 7 TV amp ELECTRONIC PROGRAMME GUIDE EPG 7 5 Pass
45. ption and press 0x to start formatting NOTE The FAT32 file system is best for high speed storage devices High Speed FS is best for low speed storage devices After formatting into the FAT32 file system you will still be able to store and share other media files on the same storage device Storage devices formatted in High Speed FS system can only be used to record from this TV and cannot store other media files Time Shift Size After the USB storage device is formatted into the FAT32 file system Time Shift cannot be altered During DVR File System Check the display will show that the whole storage device space will be used for Time Shift However Instant and Scheduled Recording will still have priority over available storage space For details on using Time Shift please see the Time Shift section 8 2 Instant Recording When a compatible USB storage device is connected you can record TV programmes at will with the press of a button While recording is in progress the TV s LED light will flash 1 PressC while watching TV to start recording Alternatively gt CHANNEL Menu gt Record Start EXIT 2 Press if you wish to display the Recording progress bar during recording Press again to close 3 Press to stop recording Recording Time 0000 03 Max Recording Time 00 3544 lt e A Mo i E Frew Hext Pause Shop L YLE TVI Syd men asialla 22 8 DIGITAL VIDEO RECORDING DVR
46. re mermat lt O in Q 2 e A gt Reference 39 10 DVD Operation Parental When playing discs with parental lock function you may select an Age Control Grade according to disc rating and your own preference For example if PG is selected DVD Video disc rated higher than PG cannot be played e KID SAF e G e PG e PG13 e PGR e R e NC 17 e ADULT Preference Page Wwe TY p ey PAY Ute o i S wibititle Dk Mifeinmilg Parental Plalsisiwionadl Delfialult Password User can change the password that is required when the user wants to change the Age Control Grade in the Parental Lock function NOTE Default password is 123456 Preference iM iihwipie A Uldie SU tite BIJ Miielrmtt Flainelntiall Password Be ivauit s O hn Q 2 e A gt Reference 40 10 DVD Operation Default Reset the DVD settings to the original factory settings by choosing RESET and pressing the OK button Prefie reinice Pag ip yipee AWS a gt Uy Et Ne MPs UM tetra ey Plalmeintialll PES ewyere Default lt O z in Q 2 e A gt Reference 41 11 REFERENCE 11 1 Troubleshooting Please do not use functions not mentioned in this user manual If a problem occurs with your TV please refer to the table below If the problem persists please turn the TV off and consult the TEAC Customer Service
47. response will show as follows e Disc Type Track Playing track Total Number of tracks Mute Repeat Mode Elapsed Time CD HD CD WMA Digital Audio JPEG Discs Display Feature When the DISPLAY button is pressed repeatedly while a CD HD CD WMA or Digital Audio JPEG disc is being played the response will show as follows e Disc Type Track laying track number Total Number of tracks Mute Repeat Mode Elapsed Time 33 S e G in 8 Q Oo 2 gt a Reference S g in 8 Q Oo 2 gt a Reference 10 DVD Operation Using the Search Feature Compatible with DVD SVCD VCD CD HD CD discs Press the GOTO button on the remote control to bring up the search Display Feature menu ll Press the Arrow buttons to highlight the Title Chapter Track Number Time Elapsed options lll Use the Numeric buttons to enter the Title Chapter Track number or Time you would like to view in the title IV Press OK to resume playback To illustrate entering 01 23 56 on the Time Elapsed selection will start the playback from that time frame forwards NOTE a This feature does not work in Program Play mode b If PBC is on it will turn off automatically when Search Playback starts c When playing WMA MP3 JPEG discs Search Feature does not work Changing the Audio Soundtrack Language Compatible with DVD SVCD VCD CD HD CD WMA Digital Audio disc JPEG discs This function vari
48. s cannot be recorded in scheduled recording Schedule a New Recording Viewing Event This feature can be used in DTV Mode EPG 1 Press O and use 4 a to highlight a Record Mode desired programme in the programme guide 1735 Wed Dec 07 2003 ELETE l1 YLE TV1 D 2 Press RED to schedule a recording or GREEN to schedule a viewing reminder 3 A scheduling menu will appear The desired programme details will already be automatically set Press 4 gt a w to change any details if desired 4 Press to save If the new event clashes with an existing event you will be asked whether to cancel the scheduling or overwrite the old event The Schedule List will display and list the new event Digital Video Recording DVR EXIT 5 Press to return to TV viewing When the time is reached a countdown will be displayed before recording or showing starts Playback oe xo t m a 5 NOTE Ifthe TV is in Standby Mode Scheduled Recording will proceed without needing to turn on Atleast 20 events can be scheduled If the maximum is reached existing events must be deleted before new ones can be scheduled Locked programmes or channels cannot be recorded unless they are already being accessed using the password Please keep this in mind when scheduling recordings DVD Operation Reference 24 8 DIGITAL VIDEO RECORDING DVR Viewing the Schedule List LP EE a EE Fil E EIEEE
49. sation 2 j Contrast Adjust picture contrast os Brightness Adjust picture brightness 6 Colour Adjust picture colour 7 Sharpness Adjust picture sharpness zE Tint Adjust picture tint NTSC format only z Colour Temperature Adjust colour temperature 26 Red Adjust Red colour level a wW Green Adjust Green colour level AE 5 Blue Adjust Blue colour level k O Aspect Ratio Adjust picture aspect ratio ie Noise Reduction Adjust noise reduction settings 2f SCREEN PC Mode Access the submenu to adjust the 9 Horizontal Vertical position Size or Phase of the picture Over Scan HDMI Mode Choose between Video and PC S g in 8 2 Oo a gt 2 Reference 14 6 ON SCREEN DISPLAY OSD MENU SOUND TIME OPTION LOCK Sound Mode Treble Bass Balance Auto Volume Surround Sound SPDIF Mode Clock Off Time On Time Sleep Timer Auto Sleep Time Zone OSD Language Audio Language ond Subtitle Language 4st gnd OSD Duration Blue Screen Country Auto Software Update Restore Factory Default Backlight System Info Enable Locks Set Password Block Program Parental Guidance qst Choose from preset sound setting profiles Choose User for manual customisation of Treble and Bass Adjust the relative intensity of higher pitched sounds Adjust the relative intensity of power pitched sounds Adjust the balance of the Left and Right audio tr
50. ss CD to view in full screen Press O to see the Photo Playback control bar Press 4 gt and to use the buttons on the bar Select between Repeat All Repeat One Repeat None Play Pause music in the current playlist if any has been selected Show the current playlist Use and to display a specific image Playlist Info Rotate SCH LIST Press YELLOW to remove a highlighted file from the list or REC LIST EXIT GREEN to remove all files Press to return to the control panel Display detailed image information Rotate current image Zoom Out In Zoom out in on current image Move View Move around in a zoomed in image 2 7 Playback So ST E m D 5 DVD Operation Reference 9 USB MULTIMEDIA PLAYBACK Music Playback 1 In the USB Menu choose Music Playback with 4 and press 0x 2 Add music files to a playlist by following on screen hints for button controls 3 Press CID to start playback Press 4 gt and to use the Music Playback control bar Repeat Select between Repeat All Repeat One Repeat None Go To Jump to a specific time in the track by keying in the format HH MM SS Press to navigate into the current playlist Use and K to choose a R SCH LIST Playlist specific image Press YELLOW to remove a highlighted file or REC LIST EXIT GREEN to remove all files Press to return to the control panel SCH LIST Scree
51. that all fastenings are secure before releasing the TV 2 v E 200mm a g p T IN A j F TTT 4 100mm 100mm m lo 3 n 5 o i MHWL LLL o iit S 200mm a Thread hole size M4 x 10 depth TV Mounting Screw Size on the TV Q S Q i Q Wa Q 4 3 PARTS amp CONNECTIONS 3 1 Front View Parts amp Connections Initial Setup amp Input Sources Remote Control Led Indicator d Remote control window keep clear OSD Menu CH Scan through channels VOL Adjust the volume MENU Display exit the OSD menu INPUT Display the input source menu POWER Turn on standby the TV set gt amp a oy e S 3 9 8 My S Oo S S e oO 2 W amp B gt USB Multimedia Digital Video Playback Recording DVR Programme Guide DVD Operation Reference 3 PARTS amp CONNECTIONS 3 2 Back View SWITCH fh mm Ooo Headphone out HDMI HDMI2 Y Pb Pr PC IN Part Name Function S Connect to the AC power supply USB Connect to a USB storage device for DVR Recording and USB Multimedia Playback Connect to the composite video output of external devices Audio L R In Au
52. the next title chapter track on a disc press Next M on the remote or the right side of the player S e in 8 Q Oo 2 gt a 2 To skip backward to the beginning of the preceding title chapter track on a disc press Prev Mon the remote Reference 31 S g in 8 Q Oo a gt a Reference 10 DVD Operation Multispeed Fast Motion Play Compatible with DVD SVCD VCD CD HD CD WMA Digital Audio discs 1 Press the Multispeed Fast Forward button on the remote during play to search through a disc Multispeed Fast Forward has four speeds x2 x4 x8 x16 x32 With each consecutive press of the button the search speed increases If you press the button five times it would resume normal play 2 During DVD playback normal play resumes when Fast Forward reaches the beginning of the next title chapter During SVCD or VCD play with PBC on when Fast Forward reaches the beginning of the next track it resumes normal play Freeze Frame Compatible with DVD SVCD VCD CD HD CD WMA Digital Audio disc JPEG discs During CD HD CD WMA or Digital Audio disc JPEG playback press Pause l once to freeze playback Press Play button to resume normal playback 32 10 DVD Operation Display Features This feature aids the user in viewing options readily available and is compatible with the following disc types DVD SVCD VCD CD HD CD WMA Digital Audio discs This display is availa
53. todelete a file 25 Digital Video Recording DVR Playback So Ss m D 5 DVD Operation Reference Playback xo t m D 5 DVD Operation Reference 9 USB MULTIMEDIA PLAYBACK This TV can play movie audio image and text files from a connected USB device For information on supported file formats see the Reference section 9 1 Connecting the USB Storage Device Use a USB storage device such as a hard disk drive or flash drive USB devices such as mobile phones MP3 players and cameras are NOT supported 1 Connect the USB storage device to the USB port on the back panel of the TV 2 If the USB storage device uses its own power supply make sure it is turned on 3 When the device is detected it will be listed in the Multimedia Menu The TV may take a while to read the data depending on the device s storage size and content NOTE For best results we recommend using a USB storage device with Data storage capacity up to 2TB An external power supply Maximum USB extension cable length 50cm 9 2 Playing Multimedia Files DTV USB INPUT Press or O and switch to the USB input source When in USB Input Mode the USB Menu will be shown Browse and play files using specific menus for different file types Return to E device list review Up Folder Information 1 In the USB Menu press 4 to choose the desired multimedia type Photo for i
54. uches a power line contact with the antenna may result _in fire electric shock or serious injury 2J Den Disconnect this device from power by turning the power off at the AC power outlet and unplugging the AC plug Warning Ignoring this precaution may result in death or serious injury Caution Ignoring this precaution may result in injury or property damage 1 SAFETY PRECAUTIONS 1 3 Use and Maintenance Although the LCD screen is made with high precision technology and 99 99 or more of the pixels are effective black dots may appear or bright points of light red blue or green may appear constantly on the LCD screen This is a property of the LCD screen and is not a malfunction Warnings Disconnect the power cord from DO NOT insert any metal DO NOT allow children to climb the power source during a objects such as a screwdriver onto the unit thunderstorm _ paper clip or a bent wire into _ the ventilation openings or A V The unit could topple over e Not doing so may result in fire terminals onto a child and result in or electric shock _ serious injury _ Doing so poses a serious risk of fire or electric shock DO NOT dismantle or modify the _unit in any way Do not attempt to _ service the unit yourself e Doing so may result in fire or electric shock If the unit _ requires repair contact the _ service center When not
55. using the unit for _ When moving the unit be sure If you notice any unusual odors long periods of time discon to turn off the unit and unplug or smoke around the unit nect the power cord from the _ the power cord from the wall _ immediately disconnect the unit wall outlet outlet _ from the outlet and contact the 2 _ service center e If not cleaned clogged dust _ Moving the unit with the _ Failure to do so may result in particles at ventilation holes power cord connected to the _ fire or electric shock could cause the unit to heat up outlet may cause damage to and ignite when switched on _ the cord resulting in fire or which may result in a fire electric shock outbreak Always have two or more people Wipe off any moisture dirt or Always turn off the unit and at hand to lift or move the unit dust on the power plug pins _ unplug the power cord when _with a clean dry cloth _ Cleaning the unit Use a soft dry e If the unit is dropped it could _ cloth to clean the unit get damaged or otherwise _ Failure to do so may result in Cause injury fire or electric shock _ Never clean with industrial _ strength polish wax benzene _ paint thinner air freshener _ lubricant detergent or other such chemicals Also do not clean with a damp cloth A Warnings _ When removing the batteries _ from the remote control
56. watching TV to pause live TV and start Time Shift Press ID to resume watching TV from where it was paused The TV will continue recording live TV 2 When a Time Shifted programme is playing a gt sign is displayed on the screen 3 Press O if you wish to display the Time Shift progress bar during Time Shift recording Press again to close 4 Press E to stop recording and return to live TV broadcast NOTE Fast Forward Rewind can be done with GO C but if you reach the end of the Time Shift recording the TV will stop recording and return to the live TV broadcast 23 Digital Video Recording DVR Playback So Ss m D 5 DVD Operation Reference 8 DIGITAL VIDEO RECORDING DVR The max recording time for Time Shift depends on the available data storage space and the size of the broadcast DTV content Time shift recordings do not remain saved on the USB storage device The name and number The current state of the program of the program The process of the program SHIT THEMA SHFT THE FEDO Oo Tia Prr Fana St op A B mark The current time 8 4 Scheduled Recording Viewing Reminder schedule an automatic programme recording or viewing event by directly selecting a programme from the EPG A Scheduled recording Record a programme into a connected USB storage device B Viewing reminder Show a scheduled programme on time NOTE Locked channels and programme
57. word Lock for Channels and Programmes Use the LOCK Menu in the OSD for password settings This menu requires password access The default password is 0000 If you have forgotten your password use the master password 4 711 Enable Locks This option MUST be turned on to use any password locks for channels and other settings 1 Press to display the OSD 2 Use 4 a v to navigate to Lock Menu Yewwill need the password for access 3 Select Enable Locks and use 4 gt to turn it On or Off as desired Password Customisation Set your personal password with the following steps Press rej to display the OSD Use 4 gt a to navigate to LOCK Menu You will need the password for access Navigate to Set Password and press 0x Key in the current password the default password is 0000 Key in the new password carefully Key in the new password once more to confirm and save the new password eS NOTE The default password is 0000 If you have forgotten your password at any time use the master password 4711 to reset your personal password Channel Locking Lock specific TV channels so that they can only be viewed after using the right password Press O to display the OSD Use 4 gt a v to navigate to LOCK Menu You will need the password for access Select Enable Locks and set it to On Select the Block Channel option and press x The Channel Lock list will display Highlight a desired channel with
58. xit the OSD completely 6 2 Menu Map OSD Menu 13 OSD Menu TV amp Electronic On Screen Display Programme Guide Digital Video Recording DVR s ke es ER P 2 gt 6 m DVD Operation Reference 6 ON SCREEN DISPLAY OSD MENU Wenu Option Description Auto Scan Tune channels automatically This will overwrite any previously saved channels and channel settings DTV Manual Tuning Tune digital TV channels manually ATV Manual Tuning Tune analogue channels manually Channel Edit Customize channel list display and channel access Signal Information Display detailed channel signal information Record Start Start recording the current DTV channel at once Recorded List Display the Recorded File List T Record Mode Schedule a future recording Schedule List Display the Schedule List Free Record Limit Set a recording limit between 1 6 hours O DVR File System Access the DVR File System Menu Select Disk Select a connected USB storage device Check DVR Check if the selected USB storage device is compatible File System USB Disk Show if the selected USB storage device is compatible Format Format the selected USB storage device Time Shift Available data storage space for Time Shift recording Size B USB Speed Shows the speed of the selected USB storage device Z E Picture Mode Choose from preset picture settings profiles Choose User a for manual customi

USER MANUAL

Contents

Download Pdf Manuals

Related Search

Related Contents