User manual
Contents
1. High Definition Digital Receiver E STAR T2 517 HD USB PVR oO a ca HD DIGITAL TERRESTRIAL RECEIVER DVB T2 USER MANUAL Important Safety Instructions 1 Read these instructions 2 Keep these instructions 3 Heed all warnings 4 Follow all instructions 5 Do not use this apparatus near water 6 Clean only with dry cloth 7 Do notinstall near any heat sources such as radiators heat registers stoves or other apparatus including amplifiers that produce heat 8 Operate this product only from the type of power source indicated on the label If you are not sure of the type of power connected to your home consult your local power company Disconnect the unit from the mains before any maintenance or installation procedure 9 Protect the mains cord from damage and stress 10 Only use attachments accessories specified by the manufacturer 11 Unplug this apparatus during lightning storms or when unused for long periods of time 12 Refer all servicing to qualified service personnel Servicing is required when the apparatus has been damaged in any way including damage to the mains cord or plug if the unit has been exposed to liquid or moisture has been dropped or is not operating correctly 13 Do not impede the air flow into the unit by blocking the ventilation slots 14 Attention should be drawn to the environmental aspects of battery disposal 15 Use the apparatus i2. This menu provides options to adjust the search channel settings Press UP DOWN to select an option and press RIGHT LEFT to adjust the setting Press EXIT to exit the menu a Auto Search This option will automatically search for channels and save them once the scanning is complete All previously saved channels and settings will be deleted 1 Select Auto Search and press OK or RIGHT to start channel search 2 To cancel channel search press EXIT Any channels that have been found will be saved wvrerreeeerr b Manual Search This option allows you to scan for new channels without deleting previously saved channels and settings 1 Select Manual Search then press OK or RIGHT The channel search screen will appear 2 Press the RIGHT LEFT key to select the channel frequency 3 Press OK to start searching channels If a channel is found it is saved and added to the channels list If channels can not be found during searching the unit will exit automatically c Country Select your country of residence d Antenna Power Enable Antenna Power if an external active antenna is connected e PMT Monitor Enable PMT Moniter if you need 4 Time Setting To access the menu press MENU then select Time using the RIGHT LEFT keys The menu provides options to adjust the time settings Press UP DOWN to select an option and press RIGHT LEFT to adjust the settings press exit to exit the menu
3. a Time offset Select auto ormanual for GMT offset adjustments b Country Region Select the Country Region when Time Offset is set to Auto c Time Zone Select the Time Zone Offset when TimeOffset is set to Manual Tol KA K First Time Installation d Sleep Set auto stanby timer Off 1 Hour 2 Hour 3 Hour 4 Hour 5 Hour 6 Hour 7 Hour 8 Hour 9 Hour 10 Hour 11 Hour 12 Hour e Power On Off Enable Power On or Off f ADV Timer Schedule a Recording 5 Option To access the menu press MENU select Option using the RIGHT LEFT keys The menu provides options to adjust the OSD Language Subtitle Language and Audio Language Select an option and press RIGHT LEFT to adjust the setting Press EXIT to exit the menu Option a OSD On Screen Display Language Select an OSD language b Subtitle Language Select the preferred subtitle language c Subititle Type Off Normal Hard of hearing d First Audio Select first audio language e Second Audio Select second audio language f Digital Audio Select the digital audio for watching TV channels PCM RAW HDMI ONJ RAW HDWI OFF Off 6 System Setting To access the menu press MENU and select System using the RIGHT LEFT keys The menu provides options to adjust the system settings Press the UP DOWN key to select an option and press RIGHT LEFT to adjust the setting Press EXIT to exit the m
4. Aspect Ratio Keep Play picture in its original aspect Discard Play picture in full screen mode c Movie Configure Aspect Ratio Keep Play movie in its original aspect Discard Play movie in full screen mode Subtitle Specific Small Displays the subtitle as small mode Normal Displays the subtitle as normal mode Big Displays the subtitle as big mode Subtitle BG White Displays the subtitle in white background Transparent Displays the subtitle in transparent background Grey Displays the subtitle in grey background Yellowgreen Displays the subtitle in yellowgreen background Tl K First Time Installati Subtitle Font Color Red Displays Subtitle in red font Blue Displays Subtitle in blue font Green Displays Subtitle in green font d USB RECORDING This function is available only when a USB storage device is connected to the receiver Instant recording If you want to start recording a live show which is currently being broadcast go to the desired channel and press the REC button Press again to stop recording Schedule a Recording To schedule a recording before broadcast e g record your favourite show while you re out follow these steps Press EPG to open the full listings Select the TV channel using the LEFT RIGHT arrow keys Select the TV show you want to record Press OK On the window that pops up you are able to modify the c
5. when the EPG is opened the current channel s listings are shown To view listings for other channels press the LEFT and RIGHT arrow keys The display shows the buttons to press to go forward or backward in the programs listing Note Please see section d Scheduling to learn how to schedule program recordings and channel preview Preview Channel To set the receiver to change to a channel at a specific time e g at the start of your favourite program while you are watching another channel please follow these steps Press EPG to open the full listings Select the TV channel using the LEFT RIGHT arrow keys Select the TV program you want to watch later Press OK On the window that pops up you are able to modify the channel date and time as well as optionally selecting to repeat this action on a regular basis Select View in the Mode option Press EXIT A few seconds before changing channels a warning message with a count down is displayed on screen which will change to the programmed channel when the count down ends c Sort Sort your channels from the following options By LCN Sort the channels in ascending order By Service Name Sort the channels in alphabetical order i K K First Time Installati By Service ID Sort the channels according to the station By ONID Sort the channels according to ONID d LCN Logical channel number Set LCN on or off 2 Pict
6. Supported Capacity 2T Supported Media MP3 JPEG BMP AVI Power Supply Voltage 220 240V 50 60Hz Maximum Power Consumption MAX OW Standby Power MAX 0 5 W Consumption Weight 0 20 kgs Size 125x103 5x40mm 18 Notice about recycling Your productis designed and manufactured with high quality materials and components which can be recycled and reused This symbol means that electrical and electronic equipment at heir end of life should be disposed of separately from your household waste Please dispose of this equipment at your local community waste collection recycling centre In the EE European Union there are separate collection systems for used electrical and electronic products Please help us to conserve the environment we live in
7. To access the Menu press the MENU button and select Program using the RIGHT LEFT keys to navigate through the menu The Menu provides option to adjust the Program Manage Settings Select an option and press OK or RIGHT to adjust that setting Press the EXIT button to exit the Menu rogram a Program Edit To edit your program preferences lock skip favourite move or delete you will need to enter the Program Edit Menu This Menu requires a password to access Enter the default password 0000 The master unlock password is 8888 5 D Set Favourite Channels You can create a short list of favourite programs that you can easily access Set Favourite TV or Radio program 1 Select your desired channel then press the FAVOURITE button Aheart shaped symbol will appear and the channel is marked as a favourite 2 Repeat the previous step to select more Favourite channels 3 To confirm and exit the Menu press the EXIT key Disable Favourite TV or Radio channel Select the Favorite channel and press Favorite button on the remote control to cancel View Favourite Channel 1 While in normal viewing mode press favourite button and the favourite menu will appear 2 Press UP DOWN to browse through your favourite channels 3 Press OK to select your favourite channel Delete a TV or radio program 1 Select the program and then press the BULE button a warning message will appear press OK to delete the cha
8. connected Connect the power The power switch is not on Switch on the power Screen shows No Signal DVB T or DVB T2 cable not connected Plug in the DVB T or DVB T2 cable Aerial cable is faulty Check aerial cable and connections No sound from speaker No or incorrect connection with audio cable Connect the audio cable correctly Sound on mute Turn off mute function Only sound no image on the screen No or incorrect connection with AV cable Make sure cables are connected correctly The program is a radio program Press lt TV RADIO gt key to shift into TV mode Remote Control is not responding The battery is exhausted Change battery Remote Control is not facing or close enough to the Set Top Box Adjust the position of the Remote Control and move closer to the unit Picture is breaking up The signal is too weak Check aerial cable and connections 17 Technical Specifications Item Sub Item Parameter Tuner 110 230MHz Input Frequency 470 860MHz RF Input level 78 20dBm IF Bandwidth 6MHz 7MHz 8MHz Modulation QPSK 16QAM 64QAM 256QAM Video MPEG4 AVC H 264 HP L4 Decoder F t eae MPEG2 MP ML HL Output Format 576P 720P 1080i 1080P 4 3 and 16 9 Output Port HDMI V1 3 SCART Audio Decoder Format MPEG 1 layer1 amp 2 amp 3 Audio output L R USB 2 0
9. enu fi4 a Set Password Set or change the password for locked programs Enter your old password or the default password 0000 You will then be asked to enter your new password Press OK button to confirm your new password Once it is confirmed press EXIT to exit the Menu The master unlock password is 8888 b Restore Factory Default Reset your Set Top Box to the Default Factory Settings In Main Menu select Restore Factory Default using the RIGHT LEFT keys and press OK or RIGHT to select Enter your password or the default password 0000 and press OK to confirm This option will delete all preset channels and settings The master unlock password is 8888 c Information View model hardware and software information 7 USB To access the Menu press the MENU button and select USB using the RIGHT LEFT keys The menu provides options to playback Music Photo and Multimedia files It can support AVI MP3 JPEG and BMP formats The unit will only support USB device with FAT32 NTFS file system a Multimedia When a USB device is attached you can select from the Music Photo or Movie options in this menu using theRIGHT LEFT keys and OK to select If a USB device is not connected the warning message No USB device is Found will appear A D b Photo configure Slide Time adjust slide show interval to 1 8 seconds Slide Mode adjust slide show effect as mode 0 59 or random
10. hannel date recording start time and recording end time as well as optionally selecting to repeat this action on a regular basis Select OTHER RECORDING in the Mode option Press EXIT A few seconds before starting to record a warning message with a count down is displayed on screen which will change to the programmed channel when the count down ends Once the recording has finished a confirmation message appears on screen To view the scheduled events press the blue button To delete a scheduled event select the event and press the blue button The recording files can be deleted on this unit you can go to the PVR and press yellow botton to delete it the TV program is recorded to file at PVR format which can be playde back on this unit and PC using a suitable player but can not be played back on DVD or PDVD For recording the high definition TV programs the version of usb device should be 2 0 or above otherwise the unit may can not record the hd programs correctly 14 D K First Time Installati When recording to usb stick or external hard disc on this model you have to wait a few seconds before pushing rec after inserting the media Otherwise the unit can freeze in the signal f that happens then please take off power and connect again to fix this Note Scheduled recording only works when the unit power is on it can not work when the unit is standby Note We cannot guarantee compatibilit
11. l 1 Front panel STAR T2 517 HD USB PVR HD DIGITAL TERRESTRIAL RECEIVER DVB T2 fa 0 La 4 REMOTE CONTROL SENSOR 2 POWER 3 USB 2 Rear panel O Ge a 220 240V RF IN HDMI SCART 50 60Hz 1 2 3 1 RF IN This socket connects to your external Aerial 2 HDMI High definition audio and video output used to connect to a HDMI device 3 SCART Remote Control MUTE To navigate inside the menus 2 FAV Displays your favorite channels list Press FAV again to access to the other favorite lists 3 SUBTITLE Display subtitle options availability depends on the channel 4 lt 0 gt lt 9 gt Numeric keys 5 MENU Display main menu on TV screen and press again to disappear menu 6 OK To confirm current setting or display all programs in no menu mode 7 EPG Shows the Electronic Program Guide 8 PAGE PAGE To navigate inside the menus 9 VOL VOL To increase decrease volume 10 REV FWD Fastbackward Fastforward 11 PREV NEXT Skip backward Fast forward 12 PLAY 13 PAUSE 14 REC Record button Optional 15 TIMESHIFT If the unit has attached an USB device goes to Timeshift mode Optional 16 ZOOM Increases the size of the image 17 ASPECT Switch 4 3 16 9 18 POWER Switch the receiver in and out of Standby mode 19 TTX Switch on Teletext if curren
12. n moderate climate WARNING To reduce the risk of fire or electric shock do not expose this apparatus to rain or moisture WARNING The batteries shall not be exposed to excessive heat such as direct sun light fire etc x oO Pp gt CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN A ATTENTION RISQUE DE CHOC ELECTRIQUE NE PAS OUVRIR This symbol indicates that dangerous voltages constituting a risk of electric shock are present within this unit This symbol indicates that there are important operating and maintenance instructions in the literature accompanying this unit This symbol indicates that this product incorporates double insulation between hazardous mains voltage and user accessible parts When servicing use only identical replacement parts This symbol on the product or in the instructions means that your electrical and electronic equipment should be disposed at the end of life separately from your household waste There are separate collection systems for recycling For more information please contact the local authority or your retailer where you purchased the product K FrontandiReanPanel sssccsssconsxcccesscensxsonssiecey scp aas sees esaariscenseeaaseauasdssexsn sane 1 ROMO COMO cise ienai ENEL N EN ENAERE SEARES 2 CONNESCtING to A TElOVISION vais ccssuscrsdsscctwacrswatenesseysmeteenaiencmsepecsesecadensnlioandssea 4 First Time Install Troubleshooting ation K Front and Rear Pane
13. nnel 2 Repeat the previous step to select more channels to delete Skip TV or radio channel 1 Select the channel you would like to skip and press the green button a skip symbol is displayed the channel is marked as s skip 2 Repeat the previous step to skip more channels 3 To save your settings and exie the menu press exit key Disable the skip channel function Select the skip channel and press the green button on the remote control to cancel Move a TV or Radio Program 1 Select the preferred channel then press the RED button A move symbol will appear 2 Press UP DOWN to move the channel 3 Press OK to confirm 4 Repeat the above steps to move more channels Lock Program You can lock selected programs for restricted viewing 6 D K First Time Installati Lock a TV or Radio channel 1 Select the preferred channel then press the YELLOW button A lock shaped symbol is displayed The channel is now marked as locked 2 Repeat the previous step to select more channels 3 To confirm your settings and exit the menu press the EXIT button 4 Press the YELLOW button to disable the locked channels function 5 To view the locked channels you will be required to enter either the default password 0000 or your last set password The master unlock password is 8888 b EPG Electronic Programming Guide This feature shows the TV program listings for each channel for the following 7 days By default
14. onnecting to a Television For a basic connection from your Set Top Box to the television use the Composite connection outlined below For a higher quality connection use the Component Video connection outlined below combined with the Composite Audio Connection For the highest quality connection use a direct HDMI connection see below Antenna K RF cable OES RF IN HDMI ot 220 240V SCART 50 60Hz K First Time Installation After all connections have been made properly switch on TV and make sure the unitis connected to the Main Power Press Power button to switch the unit on If you are using the unit for the first time or have restored the unit to factory default the installation guide menu will appear on your TV screen Select On Power Antenna if you re using Active Antenna Make sure Antenna s quality bar is more than 45 up Press OK to start to do channel searching Installation Instruction 1 OSD Language press RIGHT LEFT key to select a language 2 Province Area press RIGHT LEFT key to select your province area of residence 3 Antenna Power press RIGHT LEFT key to select antenna power on or off 4 Channel No press RIGHT LEFT key to select a channel 5 Once channel tuning is complete you can start watching TV programs Basic Operation 1 Program Manage Settings
15. t channel has this option and use EXIT key to quit Teletext 20 INFO Display information about the current channel 21 RECALL Go back to the previous viewed channel 22 LIST List of channels 23 EXIT Use this key to quit current menu 24 lt gt a Press to move the cursor 25 GOTO SWAP Select time 26 CH CH Program changing keys 27 LANG Change the Audio language and Left Right channel availability depends on the channel 28 STOP 29 REPEAT M P Repeat play 30 TV RADIO Switch between Digital Radio and DVB T modes 31 TIMER Access to the timer 32 V FORMAT Switch the HDMI 720P and 1080i Installing the Batteries Remove the battery cover from the rear of the Remote Control and place 2xAAA size batteries inside the compartment Please make sure the battery polarities match the polarity markings inside the compartment 1 Open the cover 2 Install batteries 3 Close the cover SINS TKS vii 5S Using the Remote Control To use the Remote Control point it towards the front of the Digital Set Top Box The Remote Control has a range of up to 7 metres from the Set Top Box at an angle of up to 60 degrees STAR HD DIGITAL TERRESTRIAL RECEIVER DVB T2 B 0 a The Remote Control will not operate if its pa h is blocked Sunlight or very bright light will decrease the sensitivity of the Remote Control P E C
16. ure Setting To access the Menu press MENU then select Picture using the RIGHT LEFT key The Menu provides options to adjust the video settings Press UP DOWN to select an option and press RIGHT LEFT to adjust that setting Press EXIT to exit the menu Picture a Aspect Ratio Change the aspect ratio of Video Auto 16 9 PillarBox 16 9 Pan amp Scan 4 3 LetterBox 4 3 Pan amp Scan 4 3 Full 16 9 WideScreen b Resolution You can change this setting if the picture resolution does not appear to be correct This setting is to match the most common setting for HDMI 480P for NTSC TV system 480i for NTSC TV system 576P for PAL TV system 576i for PAL TV system 720P for NTSC or PAL TV system 10801 for NTSC or PAL TV system 1080P 50HZ for NTSC or PAL TV system 1080P 60HZ for NTSC system c TV Format If the picture does not appear to be correct you can change this setting This should match the most common setting for TVs in your country NTSC for NTSC system TV PAL for PAL system TV d Video Output Change the video output CVBS RGB K First Time Installati Side by Side Set 3D Output format SBS Auto Set 3D Output Auto Top Bottom Set 3D Output format T B e OSD Transparency Change OSD Transparency 0 20 40 60 80 3 Channel Search To access the menu press MENU and select Search Channel using the RIGHT LEFT keys
17. y operation and or bus power with all USB mass storage devices and assume no responsibility for any loss of data that may occur when connected to this unit With large amounts of data it may take longer for the system to read the contents of a USB device Some USB devices may not be properly recognised Even when they are in a supported format some files may not play or display depending on the content e Timeshift When you are playing the program you can insert the USB and at any time you can press the Time shift button the frame will be paused and you may press the PLAY button after a second it will start to timeshift now You may press the PLAY button to return the normal program playing and the timeshift is continuing you may see from the below picture s bottom which is showing the time shift status In this case you may make the unit to play the recorded program from the start Press Info key to see time shift information as below First Time Installati You can press fast forward fast back to move the slide to left or right of the current recording Note Time Shifting will only be available when USB HDD is connected to the system and read write speed is high enough to do that Press Stop button to end the timeshift and it will back to the normal playing of the program 6 Troubleshooting K Problem Potential Reasons What to do No picture Power isn t
Download Pdf Manuals
Related Search