DMX-LED-DIMMER MaxiRGB
Contents
1. DMX LED DIMMER MaxiRGB User Manual DM wm ALL DMX LED Dimmer MaxiRGB Description The DMX LED Dimmer MaxiRGB is especially designed for controlling the RGB LED Stripes with 12V or 24V It has 3 PWM Outputs independently controllable with DMX Alternatively internal gradients can be called without any external controlling PWM Ji RISC Technical Data Power supply 12 24V 50mA no load DMX IN 3 channels Outputs 3 PWM signals in 256 steps PWM Frequency ca 240Hz max 10A common power supply StandAlone Funktion 9 internal StandAlone programs Board dimensions 50 x 30mm DMX ALL DMX LED Dimmer MaxiRGB Connection POWE 12V DM an ALL DMX LED Dimmer MaxiRGB 4 Addressing The DMX Starting address is adjustable with the switches 1 to 9 Switch 1 has the valency 2 1 switch 2 the valency 2 2 and so on finally switch 9 has the valency 2 256 The sum of the switches which are moved to ON position represents the starting address Switch 10 is reserved for the StandAlone function and has to show OFF in the DMX operation mode LED Display The integrated LED is a multifunctional display This LED lights in normal operation nonstop In this case the device is working The LED signalled the operation status also In this case the LED lights up in short pitches and then turns into off modus The Number of flashing signals is equal to the Number of t2. electronic systems All information contained in this manual was arranged with largest care and after best knowledge Nevertheless errors are to be excluded not completely For this reason see myself compelled to point out that can take over neither a warranty nor the legal responsibility or any adhesion for consequences which decrease go back to incorrect data This document does not contain assured characteristics The guidance and the characteristics can be changed at any time and without previous announcement
3. he error status ee ee 1 No DMX There is no DMX Signal at the Dimmer 1 2 Address error Check if a valid starting address is adjustable with the switches 1 to 9 3 DMX signal error An invalid DMX Input signal is detected Swap the signal lines by changing switch 2 and 3 or use a twisted pair wire DM an ALL DMX LED Dimmer MaxiRGB Calling the internal colour changes To access the internal colour change please switch counter 10 on On For slow colour changes the DMX LED Dimmer S allocates a SLOW mode This will be activated by switching counter 8 on ON The DMX LED Dimmer MaxiRGB Wireless has for slow colour changes a SLOW Mode This will be activated by switching the counter 8 on ON Switch 8 ON Slow Colour change Now you can select the colour changing programs with the switches 1 2 and 3 The following colour changes are selectable Colour change 1 gt Colour change 2 Le Ei ee Colour change 3 _ _ ae Re Colour change 4 ae RE Ay Colour change 5 Ed Ph Colour change 6 VA Pa Z I N N N N Colour change 7 u e Colour change 8 DM wm ALL DMX LED Dimmer MaxiRGB Dimensions SIN 60 70 all details in mm Equipment RGB LED Stripe 5m Power supply 12V DM wm ALL DMX LED Dimmer MaxiRGB 7 CE conformity This assembly board is controlled by a
4. microprocessor and uses high frequency 8MHz To get the characteristics of the assembly in relation to the CE conformity an installation in a compact metal casing is necessary Risk Notes You purchased a technical product Conformable to the best available technology the following risks should not excluded Failure risk The device can drop out partially or completely at any time without warning To reduce the probability of a failure a redundant system structure is necessary Initiation risk For the installation of the board the board must be connected and adjusted to foreign components according to the device paperwork This work can only be done by qualified personnel which read the full device paperwork and understand it Operating risk The Change or the operation under special conditions of the installed systems components could as well as hidden defects cause to breakdown within the running time Misusage risk Any nonstandard use could cause incalculable risks and is not allowed Warning It is not allowed to use the device in an operation where the safety of persons depend on this device ALL WWW DMX4ALL DE DM DMX4ALL GmbH Reiterweg 2A D 44869 Bochum Germany Copyright 2014 DMX4ALL GmbH All rights reserve No part of this manual may be reproduced in any form photocopy pressure microfilm or in another procedure without written permission or processed multiplied or spread using
Download Pdf Manuals
Related Search