Home

Telecommunications Consultants India Ltd.

1. Telecommunications Consultants India Ltd A Govt of India Enterprise Material Management Division TCIL Bhawan GK I New Delhi 110 048 IS ISO 9001 L My No TCIL 15 1482 1 12 MM 44E CO 4 April 10 2013 CORRIGENDUM No 4 to e Tender Tender No Scope of Work TCIL 15 1482 1 12 MM 44E dated 13 02 2013 Supply Installation amp Commissioning of Medical Equipments amp associated pipelining work at nine Trauma centres in different locations of Bihar State The following new Clause and Sections are added amp which overrides the previous Clause of the tender amp amendments if already exists Section 1 Notice Inviting Tender The last date of Downloading amp online submission of Bids is hereby extended upto 23 04 2013 and revised Important dates are as under Last date amp time of procurement of tender documents Last date amp time for seeking clarification if any Last date amp time for Online submission of Bids Online Opening of Technical Part Part I Online Opening of Financial Part Part ll 15 04 2013 17 00 hrs 15 04 2013 18 00 hrs 23 04 2013 13 00 hrs 23 04 2013 15 00 hrs To be notified later Bidders are advised to visit the TCIL website http www tcil india com new tenders1 php TCIL s e tendering ETS portal https Awww tcil indiaelectronictender com amp CPP portal http eprocure gov in cppp tendersfullview 224683 regularly for up
2. Part I Supply Installation amp Commissioning of Medical equipments at nine Trauma centers in different locations of Bihar State including transportation loading unloading at site amp onsite training to TCIL Client personnel Part II Associated pipelining work at nine Trauma centers in different locations of Bihar State including transportation loading unloading at site amp onsite training to TCIL Client personnel 6 1 6 2 The scope of work comprises execution of various items as per BOQ along with General Conditions of Contract GCC Technical specifications and Drawings etc The contractor shall draw up an implementation schedule in consultation with Engineer in Charge of TCIL and BSHS authorities Page 8 of 44 6 3 6 4 6 5 6 6 6 7 6 8 6 9 6 10 6 11 6 12 6 13 oir The contractor shall seek and obtain necessary prior permission from BSHS TCIL authorities before commencement of work in any area in accordance with the implementation schedule Agreement to an implementation schedule does not provide the contractor permission to commence work in any area without seeking immediately prior necessary permission to work in that area The contractor shall notify the Engineer in Charge of TCIL regarding disruption of work if and when so happens Any claim for delay in works on account of such disruptions or otherwise will not be admissible The contractor shall coordinate with all other sub
3. 58 LAPAROSCOPE WITH CAMERA Laparoscope Telescope Fully autoclavable with working length 30 to 33 cm Wide angled distortion free view and light transmission incorporated 0 deg 10mm x 1 No 30 deg 10mm x 1 No Instrument set Laparoscopic hand instrument dismentable 5mm size Reusable with 33 36cm working length take apart locking unlocking mechanism rotatable with interchangeable handle with cleaning port mono molar diathermy attachment consisting of Veress needle 12 cm length x 2 Nos Veress needle 15 cm length x 2 Nos Trocars with pyramidal tip and cannula with multifunction valve size 11mm x 2 Nos Reducer 11 5mm x 2 Nos Trocars with pyramidal tip cannula with multifunction valve size 6mm x 3 nos Cannula washer 5mm 50 Nos Cannula washer 10mm 25 Nos Laparoscopic biopsy forceps 5mm x Nos Maryland Kelley dissector 5mm with unipolar diathermy x 1 nos Atraumatic grasper 5mm x Nos Atraumatic grasper with fenestrated jaw slightly curves 1 Nos Metzenbaum scissor 5 cm with unipolar x 1 Nos Laproscopic cautery lead unipolar x 1 Nos Suction irrigation cannula with two way valve x 1 Nos L shaped hook electrode 5mm x 1 Nos Blunt spatula electrode 5mm x 1 Nos Laparoscopic bowel grasper 5mm x 1 Nos Laparoscopic spoon forceps 10 min x 1 Nos Needle holder with tungsten carbide tip 5mm x 1 Nos Clip applicator medium large 10mm 1 Nos Claw forceps 10mm 1 Nos Biplar forceps with wire teeth completely
4. Aesculab Stryker Stretchers Meber Attucho Janak Hill Rom Paramount United Hitech Yorco 35 Hematology Analyzer Logotech Mindray GB SFRI RFCL Piramal Authentic GB Sinduri Biotech Quest Morpen Piramal 37 Pneumatic Torniquet Uzumcu VBM York Table Top Centrifuge Authentic GB Insignia Remi Labtop Yorco Rh View Box Authentic GB Insignia Remi Labtop Yorco Blood Bag Transport Box Authentic GB Insignia Remi Labtop York Annexure 5 6 7 8 9 30 31 32 33 34 36 Hemoglobin Analyzer Summary Sheet of Equipments To be filled compulsory by the Bidder Name of the Bidder SI Name of Make of Model of Equipment Tendered Bidder s Bidder s offered Deviations No the the the Certification Technical Compliance technical from the Equipment Equipme Equipme Standard Specifications Yes No specifications Tendered nt nt ISI CE FDA Parameter along with Technical etc wise marking location Specifications in the catalogue 1 1 1 2 2 3 3 2 1 1 2 2 Page 43 of 44 All other terms and conditions of the tender no TCIL 15 1482 1 12 MM 44E dated 13 02 2013 shall remain unchanged Group General Manager MM Telecommunications Consultants India Ltd TCIL Bhawan GK I ND 110048 Fax 91 11 26242266 26241847 Tel 91 11 26202406 Email mmdiv tcil india com
5. Instrument should have built in battery back up amp the sample measurement should be possible in battery mode System should have air in detection system bubble detection Consumables should have minimum onboard life of 30 days Measuring Time Upto 100 Seconds SAMPLE VALUE SHOULD NOT BE MORE THAN 200uL WITH CO OXIMETRY Instrument should have simple wet section with minimum number of tubings and valves to avoid break downs Analyzer should be able to measure capillary samples Instrument should have HIS LIS connectivity Instrument should have maximum uptime Should be CE FDA approved Blood Gas Analyser for Level III station System can be used easily Room temperature storage should be there Integrated calibration and quality checks should be there Results time should be in just 30 seconds Barcoded option should be there for error free panel identification lot number and inventory records Sample volume required 100microliter Measured analytes should be pH pCO2 pO2 Na K Ca Glu Lac Hct Wireless Communication with Mobile Computers via Bluetooth Version 2 0 EDR Class 2 should be there Operates from external power or Ultra life Lithium Ion rechargeable battery should be used Recharges mobile computers when connected to external power Current Battery 2A Input output voltage car power DC12V DC9 0V Current vehicle power 4A Voltage lithium battery DC7 4V Capacity lithium battery 16000mAH Power ratin
6. e Field of illumination 40mm to 7mm for 200mm objective It should be CE FDA equivalent certified 47 Monitor 3 Parameter Should not be less than 10 touch screen It should be CE FDA or equivalent certified Should be colourTFT Should have the good resolution minimum 800 x 600 dots Should have the option for real time ECG wave forms and episode Should have the standard facility to monitor ECG NIBP Spo2 for low perfusion temp resp Trend parameters Heart rate or pulse rate respiration rate VPC rate ST level Event arrhythmia apnea time apnea frequency SpO2 NIBP Systolic Diastolic Mean Temp Trend time 1 2 4 8 or 24 h Data storage time 1 min for 1 2 4 8 hours 3 min for 24 hour Vital Signs List Parameters Heart rate or pulse rate VPC rate ST level NIBP systolic diastolic mean SpO2 respiration rate temperature Number of files in list 120 for periodic list 120 for NIBP list List interval 1 5 15 30 or 60 min for periodic list at NIBP measurement for NIBP list Should have the facility to store alarm up to 200 and displayed on the alarm history Page 24 of 44 Should have the battery backup of min 2 hr Should be able to store 16 arrhythmia episodes which can be edited for arrhythmia analysis Should have the facility to enlarge the numeric display Should have the faculty to freeze the wave forms Unit should be supplied with following accessories 1 5 lead ECG
7. gt 40000hours Certification CE FDA 10 Suction Machine It should be a full automatic surgical suction unit When the first jar is full system selects the second jar automatically After filling the second jar system stops itself and prevents the leakage of waste liquid It should have following technical specification e 60 L min flow rate e Automatic jar selecting system e Two collecting jars e Overfilling system for preventing liquid leakage e Oil free maintenance free vacuum pump e Aluminum main body e Different jar options e Dimensions WxLxH approximately 430x460x820 mm e Jt should be CE FDA certified or equivalent 11 Anaesthesia Work Station The Anaesthesia work station system PENDANT BOOM ARM MOUNTABLE MODEL should be Integrated with ventilator vaporizer The work station will be CE FDA marked as per Medical Device directive Anaesthesia Machine with vaporizers 1 Rigid construction and design with standard frame 2 Integrated suction venture operated auxiliary Oxygen flow meter for mask O2 delivery without going through the main rotameter integrated active AGS System amp integrated LED Light will be supplied 3 Gas specific pin indexed Yokes Two one for oxygen and one for nitrous oxide to accommodate 5 liter water capacity cylinders Page 15 of 44 4 Provision to connect oxygen air amp nitrous oxide directly to system with pipeline supply for each gas 5 Gas mixer Flow me
8. s forceps 12 inches long with ss holder towel clips for drapping amp sponge holder 12 inches long hook retractor 8 inches long S langenback s retractor with 2cm wide blade Humpy s knife Mesher Travers self retaining retractor 2cm jaw Travers self retaining retractor 3cm jaw customized zeiss eye loupe 14 Cautery Machine 1 Main Features The Electrosurgical unit should have HF output of 300W and must be microprocessor controlled to be used for most surgical applications with efficient cutting and effective coagulation Should have three modes of monopolar coagulation namely Soft Force and Spray Should have four blends of cut with varying degrees of haemostasis and a special mode for under water applications User settable auto stop mode in soft coagulation to switch off power automatically after the coagulation of tissue blood vessels Should have multiple programmable settings and multiple preset memory for different specialty applications User settable auto start and auto stop facility in bipolar coagulation with auto start delay facility of 0 1 amp 2 sec Should have safety alarm for leakage current patient plate disconnection and continuous activation of the unit The unit should have the facility to continuously monitor the leakage current and stop power delivery with an audible alarm if the leakage current exceed the safety limits Should do auto self test whenever the unit is switched on Page 17 of
9. 2 5 g 8 a L OJS E 2 ani e G O B aan a E Paa S s s 2 82 8 5 SES Elesle S 38 d 3 S a ses al rs c A o peg 2 gt 5 S og Pin 2 Z amp y 2 2 222 2 olg as x selg S Ela xoz EISI ee eet x wl pe eg lt lt lt 8 i p24 oa 1 2 3 4 5 6 7 8 9 10 1 12 1 1 Ventilator Nos 39 2 ICU Beds with side rack cum over Bed Nos 76 Table 3 Recovery Trolley Stretcher Nos 13 Page 2 of 44 4 Crash Cart amp Nos 17 Instrument Trolley 5 Blood Gas Analyser L I noS g 6 Blood Gas Analyser L Ill ee 7 Bio Chemistry Nos 4 Analyser 8 OT Table Nos 9 OT Light Nos 10 Suction M achine Nos 18 11 Anesthesia Worki Nos 9 Station 12 Emergency Kit Nos 9 13 Surgical Instrument Noe 5 Kit 14 Cautery Machine Nos 9 15 Transport Ventilator Nos 9 16 Stools with SS Top Nos 108 17 Intra Venous Nos 18 Infusion stand Dressing Drums S S 18 15 Inc High x 15 Ina Nos 45 Diameter S S Instrument Tray 19 with Cover 15 INX Nos 45 1OINX IN 20 Waist Linen Plastic Nos 45 Drums Waste Disposal al Plastic Drums NOS ee 22 SS Kidney Tray 500 Nos 180 ml capacity 23 SS Bowl 250 ML Nos 180 24 IS S Basin 2000 ML Nos 180 25 Bed Pan Plastic Nos 170 26 Urinal M aleplastic Nos 90 S S Dressing Tray 9 27 IN x 6 IN x3 IN with Nos 90 cover 28 E C G Ma
10. 5 or more Easy roll ball bearing precision swivel casters with polyurethane wheels Brakes steering engaged by color coded foot levers on both sides of the bed Four Two Part Assist Rails integrated into the bed side Lockable and tuck away side rails Bed Operation Controls pendant with lockout key that positions on assist rails bedsides or flexible control holder Nurse control console at foot end of the bed provides All bed functions plus Trendelenberg Cardiac Chair position individual function lock out and battery indicator Emergency operation such that all standard electrically operated functions are powered by a built in back up battery at least 1 hour in case of main power outage Page 10 of 44 1 8 Mattress Compensation moves head section toward head of bed while being raised to reduce mid section compression and body movement toward footboard Match existing decor 1 9 Positioning Adjustable height head and leg section adjustment trendelenberg reverse trendelenberg Cardiac Chair Position CPR shock 2 0 CPR Quick Release single lever operation on both sides of the bed quickly but smoothly lowers the head section of the bed 2 1 Removable head and footboard lift off for quick access to patient 22 Accessory Mounting IV and accessory mounting points on all four corners of bed track mounting system in bed sides mounting points along top middle of bed sides 23 CE FDA will meet req
11. Traction Splint Set Stretch Size LxWxH 136x22x18cm Normal Size LxWxH 90x22x18cm Self weight 2Kg Load Bearing i Quantity 2PC Size LxWxH 96x26x25cm G W 10KG N W 9KG It should be ISI CE FDA certified or equivalent Page 35 of 44 1 PART II SPECIFICATIONS OF ASSOCIATED PIPELINING WORK Medical Gases Pipeline System Oxygen Manifold Supply Installation Testing and Commissioning of Oxygen Manifold Supply System Cylinder Manifold Unit 2 x4size e It shall fully complies and meets with the requirements of the UK DOH Health Technical Memorandum 02 01 HTM 02 01 It should be CE FDA certified e 10 Cylinder Manifold bank as left side and 10 Cylinder manifold bank on right side complete with 20 Nos pig tail pipes and 20 nos non return valves e It should have all regulators which should be adiabatic certified e It should have EMC certificate in compliance with section 3 55 in HTM 02 01 Compliant with C11 model engineering specification The oxygen manifold supply system shall consist of an automatic changeover manifold control panel hereinafter referred to as manifold control panel complete with cylinder header racks and tailpipes with capacity and sizes as mentioned in schedule of quantities for high pressure gas cylinders An emergency reserve manifold complete with cylinder header racks and tailpipes with capacity and sizes as mentioned in schedule of quantities for high pressure gas cylinders The permanentl
12. volume adjustable audible prompts The device shall provide text prompts on the unit liquid crystal display The device shall offer two button operation On Off Discharge Software configurable buttons Biphasic Defibrillation Capability The device shall utilize Biphasic waveform technology as the primary energy delivery option The waveform shall be biphasic The biphasic energy protocol shall be supervisor configurable to adapt to local and or changing protocols and protected via supervisor pass code access The biphasic waveform shall allow for escalating energies up to minimum 150 Joules and above The biphasic waveform shall employ a terminating current to depolarize the myocardial cells utilizing a biphasic waveform that shall not vary significantly for patient impendence from 25 Ohms to 100 Ohms The waveform shall exhibit the same general characteristics for impedances above and below 85 ohms 55 BIPAP Mode Spontaneous S CPAP Pressure range measured at the mask IPAP 4 25 cm H20 hPa incriment of 0 2 ePAP 2 25 cm H20 hPa incriment of 0 2 cPAP 4 20 cm H20 hPa Respiratory rate Optional On LOBPM OFF Ti control S mode Ti max range 0 14 0 sec Ti min range 0 1 Ti Max sec Rise time range Min 150 900 Trigger and cycle sensitivities 5 levels Maximum flow capacity at 20 cm H20 170 L min Data display on LCD It should be CE FDA certified Treatment screen Mode and pressure leak respirator
13. 00 01 to 23 59 hrs min Page 25 of 44 e Volume limit should be 0 1ml to capacity of syringe e Unit should be PCA upgradeable e Unit should have facility for time locked BOLUS PCA facility amp administration counter and display for the same Unit should have minimum six stage programming of target time and target volume Occlusion should be of three levels low medium and high KVO Keep Vain Open rate should be programmable from 0 1ml hr to 10 ml hr nit should have LED display of flow rate amp LCD display for infused volume and elapsed time nit shout have Display of Drug name on LCD nit should have minimum 25 drug library with choice of personalized library nit should have automatic rate calculation with volume and time limit nit should have body weight based rate calculation programming nit should have stacking facility with normal or optional power cord Battery back up should be 4 5 Hrs 5 ml hr Unit should have audio visual alarms for occlusion end of syringe Syringe displaced No Syringe Wrong Syringe Pre alarm for end Invalid rate Invalid target volume Invalid target time Accuracy should be 2 for volume and time UNIT Should be CE FDA Certified U U U U U U 51 30 kW HF X Ray with automatic film processor e The High Frequency Mobile X Ray Unit should be completely integrated capable of all Standard radiographic procedures in Wards OT Trauma centre Emergency and Other rooms amp The S
14. 33 Plastic Mugs 500 ML e Standard quality e With handle e Colour of user s choice 34 Blankets e Hospital Woolen Blanket Super Fine Quality Standard Size with Border Sutton amp Deptt Name amp Logo Embossed on the Blanket e Specifications a pH balance 5 7 acidic non allergic b Smell less e c Anti peeling d Soft feel e Nylon blend Available in all colours 35 Bed Sheets e It should have over all size 100 x 60 inches 100 cotton of high quality 36 Pillow Sky Blue e It Should Have Over All Size 15 X 25 Polyfiber 37 Pillow Covers Sky Blue e It should have over all size 17 x 27 100 e Cotton of high quality 38 Draw Sheets e Jt should have over all size 50 x 60 inches e 100 cotton of high quality 39 Foot Operated Covered Plastic Dustbin Size 20 Litre Capacity 40 BP Instrument Mercury Dial Type standard quality Interchangable bp cuff of 3 sizes for paediatric adult and obese patients It should be ISI CE FDA certified or equivalent 41 BP Instrument Digital e It should be CE FDA or equivalent CERTIFIED BP apparatus with a range of upto 300mHg with provision of both adult and pediatric cuff size Measuring pressure range 20 230mmHg Measuring pulse range 40 180 per minute Measuring accuracy Pressure 3mmHg pulse 5 Dimension 185mm x 95mm x 46mm 1 5V AA Alkaline battery x 4 Included Interface USB Serial Sets memory average Automatic inflation and deflation Pag
15. 44 The unit should have a double pedal explosion protected footswitch and silicon rubber patient plate All power modes of the unit should be digitally displayed and must have soft touch key pad for controlling the power and modes The company should be ISO 9001 2000 certified and the unit must have a CE FDA mark The weight of the unit should be less than 15 Kg and should have volume display with audio and visual alarm The unit should reduce RF distortion in other O T equipments due to noiseless performance 2 Output Characteristics The Monopolar cutting mode should have HF output of 300W at 100 700 ohms with power settings ranging from 1 to 300 Watts in increment of 1 Watt with an unmodulated sinusoidal waveform of the HF voltage The Bipolar cutting mode should have HF output of 120W at 100 500 ohms with power settings ranging from 1 to 120 Watts in increment of 1 Watt and an unmodulated sinusoidal waveform of the HF voltage The Monopolar Soft coagulation mode should have HF output of 120W at 100 200 ohms with power settings ranging from 1 to 120 Watts in increment of 1 Watt and an unmodulated sinusoidal waveform of the HF voltage The Monopolar Force and Spray coagulation mode should have HF output of 120W at 300 ohms with power settings ranging from 1 to 120 Watts in increment of 1 Watt and a pulse modulated waveform of the HF voltage The Bipolar Coagulation mode should have HF output of 120W at 100 200 ohms with power settings
16. Hz should use PWM technology with power conversion with single transformer arrangement with an output of 2300 VAC protection of overload short circuit and low battery Should have indication on front panel for mains load battery load battery overload low and MCB protection in case of short circuit Should be supplied with separate battery rack ISI CE approved good quality Indian makes Laparoscopy trolley Mobile unit tower with 4 shelves 1 drawer 1 compartment for unit connection cable 1 cable channel 1 winding bracket 8 power socket 1 isolating transformer amp power cable 240V 50 Hz Camera head holder Device connecting cable 150 cm long Device connecting cable 250 cm long Universal CO2 bottle holder Should have arm for TFT monitor Should have antistatric castor wheels at least two lockable All products should be CE FDA certified 59 STRETCHERS Stretches Bay should be following Specification Light weight easy clean Anodized aluminum alloy frame work Washable Water Proof amp Anti Fungus Fabric Top With Safety Belts Pull Along handles at both Ends Load Bearing of 150 Kg It should be ISI CE FDA certified or equivalent 60 HEMATOLOGY ANALYZER 1 Function Automatic WBC 3 part 23 parameters including WBC RBC PLT color histograms 2 Principle Electrical impedance method for counting and cyanide free colorimetric method for hemoglobin 3 Test items WBC LYM MID GRAN LYM MID GRAN RBC HGB HCT M
17. Level II Darbhanga SK Medical College Level II Muzaffarpur AN Magadh Medical College Hospital Level II Gaya LEVEL III Trauma Centre Level III at Civil Hospital Kishanganj Civil Hospital Level II Gopalganj Civil Hospital Level II Jhanjarpur SH Sasaram Distt Level III Rohtas Civil Hospital Level II Madhepura This tender covers supply installation amp commissioning of Medical Equipments amp associated pipelining work Page 7 of 44 2 General 2 1 The work in general shall be carried out as per the latest approved specifications with upto date correction slips unless otherwise specified in the nomenclature of the individual item or as per specifications makes provided with this tender In case any item is not covered in any of these documents the same shall be carried out as per the approval of Engineer in Charge of TCIL 2 2 Where any portion of special conditions of contract is repugnant to or at variance with any provision of the with Instructions to Tenderer and General Conditions of contract and or the other documents forming part of the contract then unless a different intention appears the provision of the Special Conditions of Contract shall be deemed to override the provisions of the general conditions of contract and or the other documents forming part of the contract only to the extent such repugnant variations in the special conditions of contract as
18. Page 44 of 44
19. Rs 100 in this connection otherwise the bid shall be rejected 3 New clause added in Eligibility Criteria Bidder is required to submit Solvency Certificate from any Nationalized Bank for solvency amount of not less than Rs 10 20 crore part I amp Rs 1 30 crore part ID Section 4 Special Conditions 4 11 Delivery Schedule 11 Delivery Schedule The Medical equipments and The Medical equipments and associated associated pipelining work shall be pipelining works shall be delivered at delivered at respective sites within respective sites within 4 months from the 45 days from the issuance of firm issuance of firm purchase order purchase order Section 5 Price Bid Schedule 5 Part I Medical Equipments Rates Part I Medical Equipments Rates to be to be quoted for individual items from SI No 1 to 67 amp evaluation to be done on total price quoted for individual items from SI No 1 to 67 except Sl no 44 61 62 63 64 65 66 amp 67 which are placed as optional items but it is mandatory to quote the rates amp evaluation to be done on total price excluding the cost of optional items as mentioned above PRICE BID SCHEDULE Bidders should quote prices of equipments in the following performa for supplying at different 9 locations in Bihar State IPART I Medical Equipment in Rupees t Excise VAT 2 9 Duty CST E z ga 3 5 aw oO E Z 5 Z Se zg esleod E O
20. and fully meets with the latest standard HTM02 01 and C11 It should be CE FDA certified Lockable line valves and should comprise full bore ball valve complete with copper stub pipes for ease of installation Valve connected to the copper stub pipes by means of flat faced unions fitted with nitrile O ring seals allowing removal of the valve without the need to distort the pipe work Stub pipes for valve up to 54 mm will be connected to the valve body using screwed connectors while valve above this size will use flanged connectors Valve Brass body end cap and stem with a full bore chrome plated brass ball Valve Operate from fully closed to fully open with a quarter turn of the handle Page 38 of 44 All line values Supplied with a mechanism to enable the unit to be locked in the fully closed or fully open position Supplied with copper stub pipes for ease of installation using inert gas jointing procedures O Ring Seals on the valve stub allow gas tight capping at a spur for further expression Available with gas specific NIST connectors including check valves one or both stub pipes Area Valve Unit Module Area Valve Service unit Modules shall fully comply with the requirements of the UK DoH Health Technical Memorandum 02 01 HTM 02 01 It should be CE FDA certified Area Valve Service unit Modules shall be manufactured under an ISO 13485 2003 quality management system A copy of the certificate of registration
21. any upstream component failure The control panel shall be powered by an internal 24 V d c power supply There shall be manual changeover button to provide simple selection of duty bank The manifold control panel shall be provided with a lockable isolation valve to enable positive tamperproof isolation for maintenance The automatic control panel shall be supplied fully assembled and tested Oxygen Single Cylinders Emergency System Supply Installation Testing and Commissioning of Oxygen Emergency Reserve Manifold 1x2size Page 36 of 44 It shall fully complies and meets with the requirements of the UK DOH Health Technical Memorandum 02 01 HTM 02 01 It should be CE FDA certified The emergency reserve manifold shall be manufactured under an ISO 13485 2003 quality management system A copy of the certificate of registration shall be provided for review The emergency reserve manifold shall be designed and certified for use with oxygen at 200 bar and 60 C Auto ignition testing shall be carried out and a copy of the test report shall be shall be provided for review The emergency reserve manifold shall provide an uninterrupted supply of medical oxygen from equally sized high pressure cylinder banks via a suitable arrangement of pressure regulators providing a constant downstream nominal pipeline gauge pressure of 400 kPa It shall be CE marked with the notified body number specified It shall be provided with a copy of the cer
22. be made of non rust material Special plastic with monocoque shell construction of the tank area would be preferred Shell 2 part body shell is must for easy serviceability The processor should be designed to provide easy access to the electrical and micro processors for service and settings without the need to tilt the processor or drain the chemicals saving time and ensuring no wastage of chemicals The processor should have a small foot print not more than 0 5 sq mtrs The manufacturer should be ISO registered Mention if product is compliant to any international standards such as CE FDA ISO 13485 The manufacturer should have easy availability of spares locally in India The manufacturer should have fully trained engineers in the field to service the processors and ensure maximum uptime Dark Room Equipment amp accessories as required is given below i X Ray Cassettes of following sizes ii 1x17 1No 14x 14 1No 12 x15 1No 10 x 12 1No 08 x 10 1No Intensifying Screen with 400 speed of following sizes 1x17 1No 14x 14 1No 12 x15 1No 10 x 12 1No 08 x 10 1No iii X Ray Films 100 sheets per box of following sizes 1x17 1No 14 x14 1No 12 x15 1No 10 x 12 1No 08 x 10 1No iv Film Hanger of following sizes Page 27 of 44 14 x17 1No 14 x14 1No 12 x15 1No 10 x 12 1No 08 x 10 1No v Lead Apron Featherwe
23. ensure perfect sucked liquid visibility Ward Vacuum Unit It should fully meet and complies as per EC Directive 93 42 EEC Annex II article 3 Full quality assurance system medical devices It should be CE FDAI certified It must consist of the following Ino Suction Regulator and 1no 2000 ml polysulphone collection jar Suction Regulator Suction regulator should be supplied with a safety jar including and antibacterial filter and an anti overflow safety device Should have wide membrane continuous suction controller Should have vacuum levels 0 1000mbar hPa Should have vacuum gauge fitted with a protective bumper device Should have on off knob allowing for the quick restoration of a readjusted vacuum level Must have central adjustment knob with a color coded for 0 1000 mbar hPa Should have polycarbonate 150cc safety jar autoclavable at 121 C unbreakable fitted with an anti overflow safety device and equipped with a plastic antibacterial filter Suction regulator must have a unique serial number stamped on the body of each suction regulator thereby allowing for identification and trace ability Polysulphone collection jar of 2 liters with lid it should be unbreakable and autoclavable upto 134 C must be fitted with an extremely simple anti overflow safety device thereby ensuring easy maintenance Should be totally transparent they ensure perfect sucked liquid Valve box Lockable Line Valve Assemblies To comply
24. methb from whole blood with main calculated parameters like hct hco3 tco2 02 sat be ecf be blood a ado2 p50 anion gap cto2 cca 7 40 po2 a a ri and temperature corrected values It should calculate the following parameters actual bicarbonate hco3 a standard bicarbonate hco3 s base excess be standard base excess sbe total co2 tco2 buffer base 02 saturation 02 content alveolar to arterial oxygen tension grade aado2 partial 02 press At 50 02 saT p50 acid base status It should need input of the following parameters patient s temperature patient s id hb fraction of inspired oxygen fio2 and respiratory quotient rq for calculation of aado2 It should have liquid calibration with gas equilibrated calibration solution and there should be no need for bulky gas cylinders It should have economy mode with extended calibration intervals additionally to reduce the consumption of reagents while the system remains in stand by It should have pre selection programs for start up It should have relevant patient diagnosis recorded on printer All parameters should be available in single aspiration of sample Instrument should have window based operation with large colored touch screen Instrument should have built in bar code reader Instrument should store patient results automatic on board calibration reports Instrument should have different test cartridges from 50 tests to 300 tests Page 12 of 44 D
25. power failure sensor failure temps hi low e Auto set Door open alarm e Battery backup atleast 2 hour e Defrost On Cooling On Printer Data On Date amp Time will show on display e Hospital name amp department detail will show on display e Date Time Temperature amp Power failure indication will show on printout slip e Supplier Name Supplier Ph No Hospital Name amp Department Name will show on printout slip e Different alarm sound for every alarm indication e LCD Temperature graph with 24 continuous hours of data 45 Operating Headlight e Illumination 50000 Lux at a working distance of approx 250 mm Colour Temperature approx 6000 Kelvin LED Operating Life 1 W Super High Output LED rated atleast 50 000 hours operating life Spot Adjustment approx 30 mm to 80 mm at 420 mm working distance Angle of Declination Individually adjustable for every examination Rheostat Headband mounted e Operating time 6 hours e It should be CE FDA or equivalent certified 46 Operating Microscope Eye piece 10X Microscope objectives 200 300 400mm for different working distances Head power supply 220 to 240 volts 50Hzs Input Volt e Power Consumption 15v 150w or 24v 250w Output Volt Intensity 60 000 to 80 000 LUX Arm rotation 360 degree head inclination 10 degree to 100 degree Interpupillary distance adjustable individually from 50 to 75 mm Total weight approximate 60 kg
26. should have a articulated arm for easy reach to patient 15 to 100 Z axis frontal tube rotation Front telescopic crane type amp easy to use tube arm Maximum Focal Distance should be higher than 180 cm to the floor and minimum of 60 cm to the floor Should have 180 deg rotation of cross arm from its vertical axis 90 deg and 90 deg better reach to patient The unit should have a safe and secure cassette housing Page 26 of 44 X RAY TUBE Ratings Maximum KVp 125 KVp It should be Dual focal spot rotating anode with small focal spot 0 6 mm or better and a large focal spot 1 3 mm or better and Low speed rotor drives 3 000 r p m Single Phase 230 VAC 50 60 Hz 10 Others The x ray unit should meet CE or FDA standards The system offered should have AERB Type approval NOC for installation and use in India AUTOMATIC FILM PROCESSOR FEATURES REQUIRED Automatic X ray Film Processor table top model for processing all standard size x ray and imaging films upto 14 x 17 size It should have capability to process a minimum film size of 4 x 4 and above The processor should have high quality rollers of plastic rubber as needed and they should be made of long lasting material The transport system should be controlled by a micro processor built in to the system and should be able to provide uniform and smooth transportation There should be provision to set up the processor for output times of 90 105 118 135 or 167 secs dependi
27. steel varnished with epoxy powders Epoxy powders are particularly suitable to this product for their resistance to mechanical stress corrosion and chemical agents used in hospital for sanitization and maintenance operations The laying surface is provided with ergonomic push handles and arrangements for accessories The external frame is equipped with a bumper made of no trace soft plastic equivalent material The stretcher is equipped with supports for drainage bag sand The stretcher is also predisposed for oxygen bottle holder capacity 3 7 liter The backrest and the pelvis section are moved by bilateral levers with pneumatic spring Piston Mechanical while the leg rest section can be adjusted with a rack device piston The height is regulated by a pedal lever on the foot side through oil pressure pump Piston and steel compasses The basement is covered by a carter made of plastic material for easy cleaning with two basins for patient objects documents or case history The Trendelenburg and reverse Trendelenburg movements are made by a lever on the foot side middle and balanced through a pneumatic spring piston The stretcher is equipped also with no trace wheels on balls bearing 200 mm with big dimensions to allow easier and more comfortable movements The brake pedal has minimum two positions totally free and totally locked Page 11 of 44 Weight with minimum safe working load 225 Kgs Height adjustment from floor to top of s
28. than 500 mm to ensure optimal use of wall space within the facility Automatic changeover of duty bank shall occur at a cylinder gauge pressure of 14 bar actuated by bourdon tube pressure gauges with integral alarm contact connected directly to a port within the first stage pressure regulators Piston or diaphragm type pressure switches are not acceptable Line pressure shall be continuously monitored by an electronic pressure switch mechanically actuated pressure switches are not acceptable There shall be two separate stages of pressure regulation to enable high peak flow rates without a reduction in line pressure Multistage regulators combined into a single unit are not acceptable Pressure regulators shall comply with BS EN ISO 10524 2 The system shall be duplexed such that component failure will not affect the integrity of the medical gas supply The manifold shall employ be a fail safe system in the event of power failure so that both bank isolation solenoid valves open and continuity of supply is assured Upon restoration of the electrical supply the original running bank shall return on line All pressure regulators shall be protected from over pressurisation by relief valves that are vented to atmosphere The line pressure relief valve shall be provided with easing gear Two non return valves one for each bank shall be provided within a line pressure manifold block and shall provide gas tight isolation and continuity of service in the event of
29. there is less than 20mg m2 0 002mg cm2 of hydrocarbons on the degreased surface when tested by the method specified BS EN 13348 2008 Copper fittings shall be end feed type manufactured from the same grade of copper as the pipes and be in accordance with the requirements of BS EN 1254 1 1998 Part 1 Fittings shall be degreased suitable for oxygen use and be supplied individually sealed in protective polythene bags It should be CE FDA Certified Horizontal Bed Head Panel Must fully comply with HTM2022 HTM 2025 HTM02 01 and C11 standards It should be CE FDA certified It should be wall mounted exposed to wall and should supply all necessary requirements to the patients It should have extruded aluminum profiles made in one piece double track wall mounted approx four feet length Light metal front panels duly powder coated color The bed head panel should be set up with different individual profiles for variable system solutions to realize double track variants as horizontal wall mounted supply system The duct should be sufficient for mounting of electrical adapt sockets and for gas terminal units It also have medical rail 25 x 10 mm below the lower duct to which accessories like I V pole Infusion pump Syringe pump can be attached For maintenance purposes lighting components of the bed units must be exchangeable without interrupting the supply of adjacent bed units Each Bed Head Panel should be Pre Piped and Pre fitted with 6nos Gas O
30. 60 Hematology Nos 9 Analyzer Hemoglobin Moved to optional items not to be quoted here 61 Nos 9 Analyzer Pneumatic Moved to optional items not to be quoted here 62 F Nos 9 Torniquet 63 Table Top Centrifuge Nos 9 Moved to optional items not to be quoted here 64 IRH View Box Nos 9 Moved to optional items not to be quoted here Blood Bag Transport Moved to optional items not to be quoted here 65 Nos 9 Box 66 Needle Burner Nos 27 Moved to optional items not to be quoted here 67 Splint amp Traction Nos 45 Moved to optional items not to be quoted here TOTAL Optional Items Mandatory to quote Excise VAT E o Duty CST is PA gt S 4 S Z amp 3s V o 2 E 2 T S wg os Ea gt S Sie ee aes 8 z R EEE 4 38 2 gt f 2 3 Sasja 2 FH Sag s E Ss DE amp ETS o 5 3 3 BP sy g 2 s amp il ga g 2 2 c A o 25 gt gt SE Pin g Z g x 2i g T 48 z 2 Slag a 8y J o S gt lt S S gt w gt lt wl 2 pe ON a as lt lt 8 p 8 4 oa 1 2 3 4 5 6 7 118 9 10 1 12 1 44 Blood Bank Nos 9 61 Hemoglobin Nos 9 62 Pneumatic Nos 9 63 Table Top Centrifuge Nos 9 64 RH View Box Nos 9 65 Blood Bag Transport Nos 9 66 Needle Burner Nos 27 67 Splint amp Traction Nos 45 Page 5 of 44 PART II Associated Pi pelining Item Description IMake amp Model Unit Price Ex Factory Price Unit Basic exclusive of a
31. CUBICLE TRACK Made of Metal Aluminium Alloy of Box size 1 7 x 20 x 25mm with 50 60 microns thick powder coating in white colour finish Tracks are bendable to a radius of 300 mm at 90 degree to cover the whole bed b CURTAIN Made of hospital grade premium quality Stain Retardant Fabric with High quality Nylon Net of 12 and 18 on top c Supporting System Consists Of The Following Material i Wall Bracket Made of CRC steel with white powder coating finish ii Bridge Clamp Made of CRC steel with white powder coating finish iii Roof Suspension Made of aluminium pipe of 12 5 mm amp 19 5mm diameter The Upper Circular Plate made of aluminium with 50 4mm diameter thickness These are with white powder Coating outer surface finish amp are of variable height fixed with the ceiling with anchors bolts screws etc d Curtain Removable Point Page 21 of 44 Made of SS for simple loading amp unloading of curtains Also serves as an end hook retainer e Runner Comprises of wheel type runners made of Teflon for easy and smooth sliding of the curtain in the curtain track Providing Fabricating and fixing of Hospital Cubical Track System comprising of the following components and specifications 31 S S Bucket for OT 10 Litres e Complete stainless steel e Capacity 10 litres approx e Seamless and with steel handle 32 Plastic Bucket 15 litres e Standard quality With handle e Colour of user s choice
32. CV MCH MCHC RDW SD RDW CV PLT MPV PDW PCT P LCR and WBC RBC PLT histograms 4 Throughput gt 70 samples hour lt 55 second test 24h power on with dormancy and wake function 5 Sample type venous blood peripheral blood diluted peripheral blood 6 Sample volume venous blood lt 9 6ul peripheral blood lt 9 6ul diluted peripheral blood lt 20ul allow for secondary testing 7 Work mode Double counting cell automated sampling and measuring Built in dilution device automatic join hemolysin to the host and automated dilute second time 8 Blockage Removal system soak positive amp negative washing real time monitoring high pressure scorching etc multiple intelligence exhausting with the Monitoring function for incomplete plugging hole 9 Alarm automated system diagnose self check function error warning and prompt functions including insufficient reagent alarm 10 Autonomous Maintenance Instrument with the function of autonomous maintenance soaking the pipeline to reduce the plugging 11 Large storage capability 100000 samples parameters and three histograms 12 Calibration Three test modes offer independent automated calibration and manual calibration special calibration solution provided 13 LCD Touch screen 14 It should be CE FDA certified Page 33 of 44 15 Printer Built in thermal printer or optional external printer various report formats available Performance index Repeatability error Line
33. Cable 2 NIBP CUFF Adult Pediatric Neonatal 3 Temp probe Tape on Skin 4 SpO2 PROBE One no for adult use 48 Monitor 7 Parameter 1 Should have the facility of monitoring ECG RR SpO2 NIBP Two Temp Dual IBP ETCO2 and Capnography for Adult Paediatric amp Neonatal applications 2 Should have integrated colour TFT display of at least 12 or more 3 Should have facility of viewing at least 8 waveforms simultaneously 4 Should have detection facility for advanced arrhythmias namely Ventricular tachycardia Ventricular fibrillation Vent run R on T PVC s Ventricular Couplet Ventricular Bigeminy Ventricular Trigeminy Ventricular Rhythm Multifocal PVC s 5 Must use branded Nellcor or Masimo pulse oximetry module with facility for display of Plethysmograph Pulse strength amp SpO2 values 6 Should have facility of Drug dose calculation and Oxy CRG trend 7 Should have IBP waveform facility 8 Should have non volatile Graphical amp Tabular trend facility for at least 96 hrs 9 Should have facility of downloading data on a USB port and SD card 10 Should have alarm limits with alarm levels and alarm indication visual as well as audio 11 3 lead ECG measurement and simultaneous monitoring of two temperatures 12 Should have built in Capnography facility to measure End tidal and Fractional Inspired values of CO2 along with calculation of respiration rate 13 Monitor should have Wi Fi facility for wireless
34. It should be CE FDA certified Accessories to be provided Patient Cables 1 Complete Set Kit Bag 1 No Fuses 2 Nos Charger Adaptor with Power Cord 1 No USB Cable 1 No Ground Cable 1 No Software CD 1 No Paper Rolls 12 Nos Jelly Bottle 1 No Clamp Clip Electrodes Adult 6 Nos Clamp Clip Electrodes Pediatric 6 Nos Bulb Electrodes Adult 8 Nos Bulb Electrodes Pediatric 8 Nos User Operating Manual 1 No 29 TELESCOPIC INTRA VENOUS INFUSION SET Providing Fabricating and fixing of Fastrack LV Tree System comprising of the following components and specifications 1 Heavy duty Aluminium track approx 20mmX 35mm with white powder coated finish 2 Heavy duty self looking wheel trolley 3 Telescopic carrier hanger with length variation option 4 Five point hanger systems made of SS with 6mm thickness Four hanger points with folding provision 5 Fifth hanger point is fixed right below the carrier for usage convenience 6 Roof Suspension Made of aluminium pipe of approx 12 mm amp 19mm diameter The Upper Circular Plate made of aluminium with approx 50mm diameter thickness These are with white powder Coating outer surface finish amp are of variable height fixed with the ceiling with anchors bolts screws etc 30 CUBICAL CURTAIN Providing Fabricating and fixing of Hospital Cubical Track System comprising of the following components and specifications a
35. J in less than 10 seconds with charged battery inserted in the unit The device shall have the option of configurable energy protocol via pass code Power Removable battery shall be provided The rechargeable battery system shall utilize Nickel Metal Hydride Sealed lead acid technology The non rechargeable battery system shall utilize Lithium Manganese Dioxide technology The unit shall have a battery icon which will indicate the relative charge state of the battery The non rechargeable lithium battery system shall deliver 50 shocks at minimum 150 Joules 150 minutes of monitoring 5 years standby performance 10 years of shelf life 5 years storage 5 years of standby The rechargeable nickel metal hydride Sealed lead acid battery system shall deliver 60 shocks at minimum 150 Joules 150 minutes of monitoring 2 years standby performance 3 hours of ECG monitoring Charge time not to exceed 4 hours Data Recording Reporting Options Page 29 of 44 The device shall have sufficient internal memory to store ECG waveform data of 100 4 second ECG samples or 300 time stamped events The device shall offer the option of storing ECG and event data to an external nonproprietary PCMCIA data card The device shall have the option of printing Log Reports to a commercially available printer The device shall have the option of transferring ECG and event data to a PC for reviewing and or report generation AED Operation The device shall provide
36. Panel MAP shall monitor the central gases vacuum and compressed air and work or indicate abnormal conditions as per specified herein e MAP Located in the gas manifold room in the basement of the APC Building e Designed to monitor piped gas pressure high and low pressure on up to six services Via Pressure Switches in Theatres Intensive Care Units Recoveries Private Rooms and Wards etc e To act as a slave to another alarm within 250 meters using a three core screened cable four cores if signals are to be returned to the master unit e Local Area Alarms should provide indication of the condition of gas Normal High or Low Pressure at the point of use by monitoring the internal pressure of the pipeline e The Method of Monitoring Individual pressure switches for high pressure Low Pressure and Low Vacuum and each switch should be fitted with an end of line monitoring resistance Matched to the alarm panel Enable the alarm panel to detect any faults on the system wiring or signal transmission e Alarm Panel Display up to six services each with normal amp two fault conditions e Alarm Panel Battery Back Up will be provided within the system to enable the alarm panel to function normally in the event of mains power failure e The internal battery must be used to keep alarm panels operational in the event of mains power failure e Designed to monitor high and low pressure from local pressure switches e Surface or flush forma
37. acity 375 mm dia Pre treated and powder coated CE ISI FDA certified or equivalent Bed Pan Plastic It should be of good quality branded ISI CE FDA CERTIFIED or equivalent One of each of the following sizes 125 x 57 capacity 500 ml half curl open rim iv 160 x 75 capacity 1200 ml half curl open rim v Small capacity 50 60ml Urinal Maleplastic e It Should Be Of Good Quality Branded e ISI CE FDA certified or equivalent S S Dressing Tray 9 IN X 6 IN X 3 IN with Cover ISI CE FDA Certified or equivalent One Of Each Size f 200X 150 MM g 250X200 MM h 300 X250 MM i 350 X 250 MM j 450X300 MM ECG Machine e Patient leads 10 patient cables with RFI filters Defibrillator protection and patient isolation Both Sequential amp Simultaneous Type Frequency response 0 05 Hz to 125 Hz 3dB Leakage current lt 10 micro amps Input impedance gt 10 M ohms A D conversion 12 bit 2 44 uV resolution Sampling rate 500 samples sec Sensitivity 5 10 20 mm mV Dynamic range 6 mV Page 20 of 44 Speed 25 50 mm sec PC Interface Serial and or USB with cables Software OEM S w with CD Operation manual In printed form English essential English and French desirable Power requirement Single phase 230V 50Hz ac direct or with AC adapter The unit should have LCD display memory storage capacity and interpretation capability and should work on Mains as well as rechargeable battery e
38. ar range WBC lt 2 0 0 0 99 9x109 L RBC lt 1 5 0 0 99 9x1012 L HGB lt 1 5 0 300g L MCV lt 0 4 40 150Fl HCT lt 1 0 0 0 100 0 PLT lt 4 0 0 99 9x109 L Cross infection rates RBC WBC HGB lt 0 5 PLT lt 1 0 Work environment 220 1410 V 50 1 Hz temperature 10 C 35 C humidity10 90 61 HEMOGLOBIN ANALYZER 1 Should have a direct read out on LED display of hemoglobin in g l or g dl 2 Should be ready for immediate use 3 Should have auto zeroing 4 Simply inserting the cuvette should activate the meter and initiates reading of a test sample 5 Should have led type light source for long life 6 Should have 578 nm wavelength 7 Should have external memory disk for 400 tests which is supplied with cuvettes 8 Should work with input 200 to 240Vac 50 Hz supply and 9 volt battery 9 Should supply 400 cuvettes free with each unit 10 Should be CE FDA certified or equivalent 62 PNEUMATIC TORNIQUET Automatic Tourniquet Device should be used for stopping blood flow on tissue with microprocessor controlled It should have Microprocessor controlled It should have Two pressure output port It should have Alphanumeric LED display It should have Adjustable cuffs It should have to 600 mmHg with 5 mmHg accuracy Pressure setting It should have 8mmHg Pressure regulation It should have Adjustable Time setting 0 to 120 minutes with 1 minute accuracy It should be supplied with mounting tr
39. are not possible of being reconciled with the provision with Instructions to Tenderer or General Conditions of contract and or the other documents forming part of the contract 3 NATURE OF CONTRACT The rates quoted by the Contractor shall be deemed to cover for all the minor details requirement of construction installation amp commissioning which may not have been specifically s given in particular specifications BOQ but are required as per established engineering practice 4 ACCESS TO SITE The proposed sites are located in different district location in Bihar All the sites are well connected to the road rail network The contractor shall make sure that while carrying out his responsibilities in connection with this project he will not disrupt traffic movement along public road or any other approach to the site 5 DEFINITIONS 6 Definitions as per General Conditions of Contract GCC shall be amended or the following definitions appended as under 5 1 The word Site in various clauses of General Conditions of Contract GCC and other documents of this Tender shall mean either part or all of Trauma Centers for Bihar State Health Society BSHS at Bihar 5 2 Wherever in General Conditions of Contract approval of TCIL Executing Agency is mentioned it shall also include the approval from the Owner Owner s representative also SCOPE OF WORK Under the scope of this tenders following works is covered in two parts
40. centage Humidifier It should have digital temperature monitoring and inbuilt heated wire facility Nebulizer Nebulizer 30 45 minutes working facility should be provided with ventilator Power requirements It will run on the commonly available 220 240 v ac supply High Pressure driving gas should be supplied with the Ventilator There will be a battery backup of at least half an hour or more ventilator will function with out any change in set parameters for this duration Fail safe In case of oxygen failure it will continue to ventilate the patient with air In case of external power failure it will continue to ventilate the patient on internal backup battery Item will be FDA CE approved All the components of the system will be from the same manufacturer The machines will be supplied complete with all the required power cords patient circuits for all uses with appropriate masks and connectors user manual etc in ready to use condition ICU Beds with Over Bed Table amp Side Rack Bed Side Cabinet It should have following standard features Electrically operated ICU bed to include Sleep Surface four part area measuring width 35 39 x length 78 constructed of removable pressure reducing butterfly spring and strut suspension system or equivalent system or light weight non corrosive HPL surface stainless steel Chrome components Powder Coated Weight Capacity minimum safe working load 220 Kgs Casters four 4
41. chine Nos 9 Telescopic Intra 29 Venous Infusion Nos 81 stand Page 3 of 44 30 Cubical Curtain Nos 81 316 S Bucket for 10 Nos 36 litre 32 Plastic Bucket 15 Nos 90 litre 33 Plastic Mugs 500 ML Nos 135 34 Blankets Nos 90 35 Bed Sheets Nos 180 36 Pillow Nos 90 37 Pillow covers Nos 180 38 Draw Sheets Nos 450 Foot Operated 39 covered Plastic Nos 90 Dustbins 40 BP instrument Nos 54 Mercury 41 B P instrument Nos 54 Digital White Background X 42 Ray Viewer 2 X Ray Nos 18 Pane 43 Scrub Station for OT Nos 9 Blood Bank Moved to optional items not to be quoted here 44 j Nos 9 Refrigerator 45 Operating Headlight Nos 4 46 Operating Nos 4 Microscope 47 Monitor 3 Nos 39 parameter 48 Monitor 7 Nos 9 parameter 49 Central Monitoring TAE station 50 Syringe Infusion Nos 92 Pump 30 KW HF X Ray with 51 Automatic film Nos 9 Processor 52 100 mA X Ray M c Nos 9 53 Color Doppler Nos 9 54 Defibrillator Nos 13 55 BIPAP Nos 4 Be ARM Image Nos 9 Intensifier Page 4 of 44 57 Rapid Sterilizer Nos 9 58 Laproscope with Nos 4 Camera 59 IStretchers Nos 45
42. cidental damage or bed jacking Gas specific components shall incorporate the gas identity marking permanently stamped or cast into the component surface The first fix shall be all metal construction with a brass base block and copper stub pipe The first fix shall incorporate an integral check valve to enable servicing of the second fix and valve seals without isolation of the gas supply Probe roller pins shall be manufactured from stainless steel Wall mounted terminal units shall be provided with white ABS mounting box with matching fascia The mounting box shall have smooth rounded corners to avoid the possibility of injury A bezel shall be available to cover the plaster edge provide a neat and easily to clean finish Oxygen Flow meter amp Humidifier Bottle Supply Installation Testing and Commissioning of Oxygen Flow Meter with Humidifier Bottle It should be CE FDA certified Pressure compensated to prevent back pressure build up on flow indicator Durable polycarbonate flow tube with cover It should be made up of anodized aluminum body and control knob Page 37 of 44 Flow meter should have twin graduated scale which must provides precision control permanent scale graduations Flow meter should be placed in the vertical position It should be light weight of 200g It should have 4 gauge accuracy Inlet pressure 50 60 psi The flow meters should be of 1 15 LPM range for oxygen and with inlet pressure 50 60psi Polysulph
43. communication with Central Nurses station meant for connecting monitoring simultaneously at least 16 monitors 4 Unit should be supplied with following accessories 5 lead ECG Cable NIBP CUFF Adult Temp probe Tape on Skin SpO2 PROBE One no for adult use Accessory kit for Capnography Monitor should have built in Electro Surgical Unit amp Defibrillator protection Monitor should have an optional facility for 12 lead ECG Anaesthesia Gas Monitoring AGM with auto gas identification along with display of MAC value Dual IBP amp Cardiac Output CO with Thermodilution method 17 Must be CE FDA approved Soya epee Dp 49 CENTRAL MONITORING STATION Branded PC Printer with 17 TFT screen Up to 64 Waveforms of 32 Bed Side Monitors 6 25 12 5 25 50 mm Sec Selectable Sweep Speed 4 Hours of dynamic Trend Display of All Parameters Remote Monitor Control Bidirectional Communication 240 Hours Trend for Each Monitor 720 Items Parameters Alarm review for each Monitor 720 CO Measurement Review Display of Parameters Like ECG NIBP SpO2 Resp Temp IBP Respiration CO Et Co2 Etc 10 Bed to bed View Facility 11 Should have wireless CNS connectivity It should be CE FDA certified SRN AN Rw 50 SYRINGE INFUSION PUMP e Syringe Pump front loading should accept 10 20 30 50 ml syringes of known brands as well as CUSTOM programmable syringe e Flow rate range should be 0 1 990 0ml hr e Time limit should be
44. contractors or vendors selected by the client for other works in relation to this job and extend all support to the other vendors as far as practicable The contractor shall make his own arrangement for storage of materials outside the site of work However if any space is available within the site of work the contractor shall seek and obtain necessary permission from the BSHS authorities regarding the same Nevertheless security of the material shall be the contractor s responsibility Manufacturer s drawings catalogues operational manual pamphlets equipment characteristics data performance charts and other documents submitted for approval shall be in four sets Each item in each set shall be properly labeled indicating the specific services for which material or equipment is to be used giving reference to the governing section and clause number and clearly identifying in ink the items and the operating characteristics Data of general nature shall not be accepted The contractor shall maintain a site order book at the site office All instructions received from the Engineer in Charge of TCIL relating to the work shall be retained in the file The contractor shall establish an effective quality control system at the site and implement the same to enforce quality control on all items of the work and the project at all stages The contractor shall take all precautions and preventive measures against fire hazards at the site and shall assume
45. cuvettes very high quality Cuvettes thereby minimizing the maintenance protocol 8 O T Table Table is 5 sections or more with split leg section cut out and is C arm compatible Table is Electro Hydraulic Electro Mechanical having remote and an Electronic override Remote controls Height adjustment side tilt and Trend rev Trend positions Flex Reflex and sliding both ways head side and leg side Back Head and Leg sections are manually adjustable Table should have min 4 castors that are electrically conductive Base frame of table is made of high grade rust resistant Stainless Steel Table Length is approx 1750 2050 mm with Head and Leg plates It should have head section back and chest section It should have maintenance free for long lasting performance and load bearing corrosion free easily replaceable modules It should have frame with following features Solid made of stainless steel Stable attachment of accessories Easy to clean e It should be supplied with battery Pack Should be CE FDA Approved Features Table width is 500 550mm without side rails It should have telescopic head section It should have back section adjustment it should have 24v dc battery pack operation Height adj is approx 600 mm to 1050mm Trend Rev Trend is 25 30 deg Lateral tilt is 15 20 deg Back section adjustment is 80 deg 40 deg 5 Leg plate adjustment is 15 deg 95 deg 5 Head plate adjustment is 30 deg 30 de
46. dates amendments if any Sl No Existing Clause amp its contents Proposed contents of the clause Section 1 Notice Inviting Tender 1 Eligibility Criteria 4a Two supplies of similar Medical equipments and associated pipelining work costing not less than Rs 8 15 crore for Part I amp Rs 1 crore for Part II each or b One supply of similar Medical equipments and associated pipelining work costing not less than Rs 16 25 crore for Part I amp Rs 2 10 crore for Part II Eligibility Criteria 4a Two supplies of similar Medical equipments and or associated pipelining work costing not less than Rs 8 15 crore for Part I amp Rs 1 crore for Part II each or b One supply of similar Medical equipments and or associated pipelining work costing not less than Rs 16 25 crore for Part I amp Rs 2 10 crore for Part II Page 1 of 44 The bidders and the OEM s of the offered products should not have been barred blacklisted by any central government department organization or central state PSU The bidders and the OEM s of the offered products should not have been barred blacklisted by any central government department organization or central state PSU Autonomous bodies amp no CBI CCI anti corruption enquiries are going on against lead bidder amp consortium JV partners The bidder shall have to submit mandatorily an Affidavit on Non Judicial Stamp Paper of
47. der ambient 32 C Input output voltage adapter AC100V 240V DC9 0V Output current adapter 4A Input output voltage battery AC 100V 240V DC9 0V Current Battery 2A Input output voltage car power DC12V DC9 0V Current vehicle power 4A Voltage lithium battery DC7 4V Capacity lithium battery 16000mAH Power rating DC9 0V 18W DC7 4V 13W Weight with battery 5 3kg Battery working time Per battery working 6 8 hours under 35 C battery is interchangeable and rechargeable It should be ISI CE FDA certified or equivalent 66 NEEDLE BURNER Input voltage should be 220 250 VAC 50 Hz No Load Current should be lt SOmA The current while burning needle should be 0 5A Needle burning temperature should be 1500 C Needle burning time should be 3 Sec Operating humidity should be lt 85 Dimension should be H X W X D 73 X101 X 263 mm Weight should be 1400 gr Power consumption while burning needle should be 100Watt It should be ISI CE FDA certified or equivalent 67 SPLINTS AND TRACTION Medical Traction Splints A sustained pull applied mechanically especially to the arm leg or neck so as to correct fractured or dislocated bones overcome muscle spasms or relieve pressure avoids further hemorrhages shock and secondary nervous vascular bone and muscular damages Length adjusted aluminum body durable nylon leg straps automatic traction mechanism Set of adult and pediatric sizes to gather with the carry bag
48. detachable 5mm dia working length 36cm 1 Nos Monopolar high frequency cable 3 meters 1 Nos Bipolar connecting cable to standard electrosurgical unit 1 Nos ENDOSCOPIC CAMERA SYSTEM Camera head unit consisting with following spec image sensor 1x 1 3 CCD chip Pixel 752 h x 582 v pixel per chip AGC Microprocessor controlled Camera control unit with followign specs maximum resolution of 440 000 pixel progressive scan CCD sensing chip should optimum image quality for maximizing hi fidelity image transmission optimizes to any size the system should have optical zoom to quality of image size and cross specialty window standardization of the camera system regardless of the telescope used The system should automatically optimize all settings The system should be ready to use as soon as it is connected to the camera control unit HIGH RESOLUTION MEDICAL GRADE COLOUR MONITOR 15 should have composite video SVHS amp RGB output colour monitor TFT compatible with above camera system resolution CO2 Electronic Automatic Insufflators Electronic automatic insufflators with pin index connection Should have an adjustable flow rate of 0 5 to 20 litre per minute and a pressure range adjustable 0 30mmHg Preset and actual value for pressure and flow should be displayed together for better monitoring of both values Pressure and flow rate should be displayed on the frontal panel Should be able to select either central suply 4 5 k
49. dren above 5 kg to adults Should provide pressure amp flow triggering amp advance leak compensation for effective ventilatory support Should have a data card not less than 1 GB for storing all necessary ventilation data or USB port for retrieval of data Data to provide ventilation therapy for effective treatment Alarms both audio as well as visual apnea low high volume low high minute ventilation low high respiratory rate low high inspiratory pressure in volume modes Should be able to monitor exhaled tidal volume exhales minute ventilation leak rate respiratory rate peak inspiratory flow peak inspiratory pressure i e ratio mean airway pressure Battery backup of min 6 hours Should be light weight lt 7 5 kg for easy transfers All the components of the system should be from the same manufacturer The machines should be supplied complete with all the required power cords patient circuits for all uses with appropriate masks and connectors user manual etc in ready to use condition Item should be CE approved FDA approved Stools with S S Top Complete stainless steel Ss top Height adjustable from 450mm to 680 mm Four legged made of 25mm steel tube mounted on rubber shoes Stainless steel ring fitted with legs for footrest ISI CE FDA mark or equivalent Intra Venous Infusion Stand Stainless steel I V Stand with four locations Five pronged tubular rectangular stable base with castor Variable height adj
50. e 22 of 44 3 min automatic power off Large LCD Display Measures Systolic Diastolic Pulse Low battery indicator Cuff Size Adult 22cm 33cm Batteries Included Extra Accessories to be provided e Batteries AA Size 08 Nos Arm Cuff 1 No Cable for USB 1 No Paper Roll 5 Nos Soft Carrying Case 1 No User Manual Operating Manual Product Manual 1 No 42 White Background X Ray Viewer 2 X Ray Panel e PURE UNIFORM WHITE BACKLIT DISPLAY SLIM WALL MONTABLE 220V 5 A IS CE FDA CERTIFIED or equivalent SIZE FOR ONE FULL LENGTH X RAY CT MRI FILMS WITH ON OFF SWITCH 43 Scrub Station for OT It should be a 2 bay Compact Surgical Scrub sink will be designed for use in Operation theatre complex providing surgeons with a convenient sink for pre op scrub up Each fixture will be fabricated from heavy gauge type 304stainless steel amp will be seamless welded construction polished to a satin finish The scrub sink will be provided with a front access panel which will be easily removed for access to the water control valve waste connections stoppers amp strainers Hands free Operation will include infrared sensor with built in range of adjustment Thermostatic Mixing Valve control will be located behind the access panel amp maintain constant water temperature User defined settings of 1 3 5 10 min are available This timing will be adjustable to meet individual application requirement provided with infrared sensor thermo
51. e with BS 3928 1969 utilising particles in the 0 02 to 2micron size range Bacteria filters shall be marked with the legend Bio Hazard The pressure drop across each clean filter at 50 of the system design flow should not exceed 25mmHg 3kPa at a vacuum of 475mmHg 63kPa e Fach bacteria filter shall be provided with a transport sterliseable collection jar to collect condensate The total water capacity of the pressure vessels shall be at least 100 of the design flow rate of the plant in 1 minute in terms of free air aspired The plant control and power management system shall monitor the safe operation of the plant providing signalling into the alarm system as per the requirements of HTM02 01 Vacuum pump exhaust shall be piped out of the plant room amp discharged outside the building at high level away from windows and any other air intakes Copper Piping Supply Installation Testing and Commissioning of Medical Grade Copper Tube and Fittings The piped distribution system shall use copper pipes manufactured from phosphorous de oxidised non arsenical copper to BS EN 1412 1996 grade CW024A Cu DHP manufactured to metric outside diameters and having mechanical properties in accordance with BS EN 13348 2008 in either R250 half hard or R290 hard Copper pipes shall be carry the officially licensed BSI kite mark CE FDA Equivalent Mark and certification shall be provided for review Degreasing of pipe shall be such that
52. f luminous by using high frequency electronics fluorescent tubes and ballast o The vendor has to do the AHU Ducting amp False Ceiling o It should be CE FDA certified or equivalent EF APPROVED MAKES S N Maquet Drager Air Liquid Event Tyco Techma 1 Ventilator S A Oricare Flight Hamilton Heinen Lowenstein Phillips 2 ICU Beds with siderack cum Over Bed Table Merivaara Volker Hill Rom Paramount Huntlegh Stryker Givas Muka 3 Recovery Trolley stretcher Merivaara Hill Rom Tarsus Paramount Huntlegh Stryker Givas 4 Crash Cart amp Instrument Trolley Tiano Hanlim Metro Weinmann 5 IL Opti Radio Meter Roche Nova Siemens 6 Blood Gas Analyzer Level T amp TD Eschweiler Abott Alere Erma IL Mindray Dirui Bauckman Culter RFCL Advia Roche Piramal Adif OT Table Trident Medifa Brumaba Berchtold Trumpf Steris Dr Mach Maquet Tekkuchi OT Light Martin Trilex Berchtold Trumpf Trident Mediland Maquet Stryker Suction Machine Narang Supreme Anand United Bio Chemistry Analyzer Page 41 of 44 Anesthesia Work Station Emergency kit Surgical Instruments Kit 14 Medical Gases Manifold Pipeline system Oxygen Oxygen single Cylinders Emergency System Terminal Units Gas Outlets with probes Adaptors Oxygen Flow meter amp Humidifier Bottle Ward Vacuum Unit Suction Jas Will Have the following Va
53. full responsibility for the same All cutting and drilling of walls or other elements of the building for the proper entry installation of inserts boxes equipment etc shall be carried out using electrically operated tools only Manual drilling cutting chiseling etc shall not be permitted The contractor shall provide warning caution notice boards with light arrangements around the area of working place on all sides as applicable where the work is in progress Any cut out on floor shall be duly cordoned off with ribbonned barricades for safety of workers as well as for passersby Safety to contractor s personnel as well as all visitors in and around the area of work shall be the contractor s responsibility The contractor shall at all the times during the progress of work take all requisite precautions and use his best endeavors for preventing any riotous or unlawful behavior by or among the workers and other employees at the work and shall preserve peace and protection of the inhabitants and the security of property in the neighborhood of the work In case the above are not provided at site within 10 days of placement of LOI TCIL shall procure the same at the risk and cost of the contractor and the expenditure so incurred shall be recovered from the contractors PART I SPECIFICATIONS OF MEDICAL EQUIPMENTS Ventilator The requirement is of a modern microprocessor controlled intensive care ventilator Modes It will have at leas
54. g 5 It should supply with following accessories or equivalent accessories as per quoted model 1 Head plate 2 Arm support 2 Nos 3 Leg holder 4 Side arm support Lateral Arm Support 5 Anesthesiology screen rod 6 Anesthesiology tube holder 7 Side positioning support 8 Calf support 9 Instrument tray on table 10 Push handles 11 Infusion stand Page 14 of 44 12 Mounting brackets Clamps 9 O T Light Description Operating Room Surgical Lighting System should provide an ideal combination of brightness maneuverability and shadow resolution without sacrificing color accuracy through a consistent homogeneous LED technology It should have green light for endoscopic illumination Such Lighting System should have the following technical specifications Number of Lightheads Two per suspension Color Temperature 3600 5000 kelvin in 3 or more stages Color Rendering Index 95 Depth of Field 800 1500mm Illumination Level 1 60 000 Lux Controls Wall Control Touch Panel Rotation 360 degrees in all joints and domes Vertical Adjustment Range approx 22in 55 9cm 25in 63 6cm depending on ceiling height Sterilizable Handle Yes Lighthead Diameter approx 26 30 Mounting Type Ceiling Supply Voltage 100 230VAC 50 60Hz Power lt 100 Watts per dome Bulb Type LED Total Irradiance at 160klux lt 600W m2 Rated Input 100 230V 50 60Hz 6A Lamp service life
55. g DC9 0V 18W DC7 4V 13W Weight with battery 5 3kg approx Battery working time Per battery working 6 8 hours under 35 C battery is interchangeable and rechargeable Should be CE FDA approved Bio Chemistry Analyser It should have a throughput of minimum 200 tests hr of photometric reagents and min 330 Test Hour Throughput with ISE It should have a holographic grating with a Photo diode array which minimizes the step through time loss due to filter selection in Grating Non grating machines It should have at least 50 online tests and 200 analyzing parameters and 50 or more calculation tests programmable All the positions in the reagent tray should be refrigerated It should have min 40 sample positions including Calibrators controls and dedicated minimum 10 STAT positions It should have Minimum 80 disposable cuvettes having less than 250 uL reading volume It should have 8 step washing system using acid alkaline warm water to avoid carry over Page 13 of 44 It should have two different probes for different reagents thereby minimizing carryover and contamination e It should have the capability to run 2 or more reagent chemistries The software should be advanced preferably based on Windows XP to enable easy user machine interaction It should have primary tube bar coded sampling It should be CE FDA approved system It should have programmable QC with LJ charts Westgard Rules It should have permanent Glass
56. g cm2 input pressure from central supply as well as direct connection to high pressure CO2 cylinder Should have internal heater inbuilt for waming up the cold CO2 gas Provided with silicon autoclavable tubing 4 sets with luer attachment Instrument should work on a universal AC supply between 110 240 V with a frequency of 50 Hz single phase Electrical safety certification IEC 601 1 and CE Page 32 of 44 acc to MDD Secuvent safety system for constant monitoring of intraabdominal pressure and checking overpressure with automatic back release of CO2 gas within 5 second with acoustic alarm Should be supplied with 2 nos high pressure hose pin index minimum length 1 0 meter Xenon light source with 300 watts lamp power required 220 V AC Manual illumination intensity control life of the lamp should be displayed on the Qty 01 No Formalin Chamber Formalin chamber made of Virgin Acrylic 6mm thickness Size 26 x 8 x8 LxBxH with three tray for sterilizing the laparoscope preferably with three tray x 2 Nos CO2 cylinder CO2 cylinder to accept 4 5 kg liquid CO2 capacity bottle with pin index connection x 2 Nos Disinfection tray Disinfection SS tray of steel grade 304 with sieve tray to life size 27 x 7 x 5 LxBxD x 2 Nos UPS System UPS 2 0 KVS off line with one hour backup time at 1200 watts real load with inbuilt SMF batteries Should be able to work on wide input range between 160 270 VAC at frequency between 50 hz 5
57. he quoted price 3 Bidders to provide details of taxes in the bid Page 6 of 44 Please indicate the rate of applicable CST VAT if TCIL issues Optional Items Mandatory to quote CMC will not be a part of Evaluation All inclusive charges Description per annum Comprehensive CMC Charges for Post Warranty Period of 3 yr 3 yr Non Comprehensive CMC Charges for Post Warranty Period of Note 1 Please furnish the Scope of Work of Comprehensive AMC Charges and Non comprehensive Charges Please furnish list of recommended spares along with reference price in a separate sheet 6 SECTION 6 TECHNICAL SPECIFICATIONS Existing Technical specs is superseded by Revised specs as below Annexure for Summary sheet of equipments is being added in this section Bidders shall have to fill up this sheet with the detailed information of all the items in the BOQ It is mandatory for the technical evaluation 1 INTRODUCTION The Bihar State Health Society BSHS Govt of Bihar intends to establish 9 Trauma Centres for Bihar State Health Society in Different District in Bihar BSHS has entrusted the work to TCIL Ltd as Project management consultant The work broadly involves construction of Trauma centres building and other facilities like medical equipments etc 9 Trauma Centre s are as under TU ee ORO AMAMN LEVEL HI Distt Hospital Level II Purnia Darbhanga Medical College
58. ight apparel assembled with Lead Vinyl Regular Size 1 No vi Lead Glove Universal size 1 Pair vii Safe Light with filter 20 3 x 25 4 cm 8 x 10 Wall Model 1 No viii Film Viewer 1 No ix Stainless Steel Master Tank with 4 Nos 22 5 Ltr Inner Tanks Lids for 5 gallon and Master Tank Size 35 x 18 x 22 1 No x X Ray Developer 22 5 1 No X ray Fixer 22 5 1 No xi Name Printer 1 No xii Lead Goggle 1 No xiii Timer 1 No xiv Dark Room Thermometer 1 No XV Lead Blocker Size 12 x 15 1 No xvi Lead Letter A Z 0 9 R amp L 1 Set 52 100 ma X RAY MACHINE X ray machine 100 mA X ray Machine counter balance mobile stand X ray machine 100mA 100 KVP full wave multipulse rectified generator with BEL DSA 3 DSA 2 X Ray tube or AERB approved fine focal spot tube e Output 8 Kw or less e KVP range 45 to 100 KVP in steps of 5 KVP step e Control complete with voltmeter mA meter Quick trip overload circuit breaker voltage compensator e Tube head Having BEL DSA 3 DSA 2 and high voltage transformer e Machine safety device Electronic sensor to protect X Ray tube and high voltage transformer from overloading Quick tripoverload circuit breaker e Collimator Light beam cum shutter diaphragm e Power supply requirement 230V 50 Hz single phase 15 Amps e Stand Mobile stand with counter balanced Articulated tube carriage allowing move
59. ll levies amp charges Excise Duty VAT CST Transportation Cost othe Any amp forwarding charges Price Unit all of 5 7 9 10 11 S No 2 p Quantity Amount Amount So levy charges Packing gt llevies amp charges _ inclusive _ Excise Custom Tariff Head 3 M edical system Gases Pipeline one pipeline system includes the following items Fully Automatic gas control panel for oxygen 1 set 4 4 oxygen manifold with pigtail pipes amp NRV s without cylinders 1 set single cylinder emergency oxygen manifold 1set terminal units gas outlets with probes adaptors as per NFPA CSA UL listed for oxygen system 11 no for vacuum system 11 no for N20 system 1no oxygen flow meter with humidifier 9no ward vacuum with regulator Ono medical gas zone valve Box 2 services 1no medical gas area alarm 2 services 1no horizontal bedhead panel Al Extruded 5 feet long Provision for gas outlet electrical switch amp socket nurse call etc 9no Nitrous oxide cylinder 1no vacuum system with 1xIR 235 pumps 1 set Copper piping l set amp ceiling Suspended pendant 1no Nos Laminar Air Flow System for Operating Room Nos TOTAL Note 1 Concessional Sales Tax Form 2 Please indicate the list of standard accessories and Free of Cost Spares included in t
60. lve box Medical Gas Alarm Main amp Area Vacuum System Copper Piping Horizontal Bed head Panel N20 cylinder emergency system Single Arm Moveable Pendant for Operation Theatre Penlon Infinium Spece Lab Allied Medion Dragger Datex Phillips VBM GmbH Uzumcu Medivent Sisco Kay amp Company Sahnisons Med Freshe Wolf Carl Storz Sahnisons Sisco Kay amp Company VBM GmbH Yorco Med Freshe Cautery Machine Valley Lab Erbe Zeiss Eshman L amp T Medical Medion Zerone Transport ventilator Drager air liquid progetti medical Tyco Takoka Flight Hamilton Phillips Penlon Allied Beacon Medaes Ohio Delta Dragger WTK Nine Pahsch Articles Different Indian Makes 14 E C G Machine 17 Telescopic Intra Venous Infusion stand 1 CUBICAL Curtain 8 32 BP Instrument Mercury BPL Universal Hygeia Medion RMS Phillips MDD Fasttrack Windowtech Hitech Medion Kay amp Company MDD Fasttrack Windowtech Hitech Medion Kay amp Company Diamond Morepen Narang 33 BP Instrument Digital Morepen Infi Omron 34 White Background X Ray Viewer 2 X Ray Pane Mex India Medical Engineers MDD Unique 17 Scrub Station for OT PES SHD MDD Narang Hitech CMS Steri ME Medikraft Blood bank refrigerator Operating head light Laminar Air Flow System Monitor 3 parameter Eg Operating Mic
61. matically driven will not require change of bellows for adult and infants 2 It will have following features i Modes VCV PCV PSV Manual Spontaneous modes so that reversal complications can be Handled in the Operating Room itself ii Tidal volume range 20 ml to 1500 ml iii Facility for Sigh iv Integrated PEEP variable electronically up to a minimum of 20 mbar v Adjustable breath rate 5 80 bpm vi Inspiratory pause vii Will automatically display and compensate for compliance of breathing circuit 3 Alarms will have audiovisual display of alarm messages for Airway pressure minute volume inspiratory O2 concentration audio power supply fail alarm fails to cycle warming airway pressure alarms for high and low pressures 4 In built battery backup facility for up to a min of one hour 5 Self diagnostic facility to check the overall system including ventilator for leakage 12 Emergency Kit Emergency Kit contains the following items in a compact carry case Standard Accessories Three sizes face masks with tubing Small oxygen cylinder Single stage single gauge regulator Cylinder Key Provision for using cylinder with Tubing filled with metal end Refilling for Refilling the cylinder Manual Resuscitator Manually Operated resuscitator with double inlet valves for air and oxygen attachments Suction Pump Manually operated Suction Pump to aspirate the mucus blood or other secretion from the entire airways of Adul
62. ments of the tube head in vertical and horizontal plane lead lined cassette strong box 53 Color doppler A state of art fully digital compact portable Colour Doppler Ultrasound machine is required with following technical features 1 The system should be with following Broad Band width transducers a Multi frequency Convex array transducer Frequency range 3 7 Mhz for Abdominal Ob Gyn applications b Multifrequency Linear Array Transducer frequency range 5 to 12 Mhz for vascular amp small part applications c Multi Frequency Endocavitory transducer frequency range 4 to 9 Mhz for TV TR applications 2 System should have digital processing channels 1100 or more 3 System should have grey scale Min 256 or more 4 Imaging modes of Real time 2D Colour Doppler Power Doppler Pulsed wave Tissue Harmonic Imaging Trapezoidal Imaging amp 3D imaging 5 System must have integrated 3D imaging package 6 System should have broad bandwidth beam former technology transducers for extreme high resolution 2D image 7 The system shall process a dynamic range that is at least 170db The system must display at a maximum depth of2 30 cm 8 The system should have high frame rate of 160 frames per second or more 9 The unit should have min 3 active ports with direct switching from console 10 The system should have facility of gain adjustments using slide pot control for excellent images 11 Flat LCD TFT monitor of at least 15 inches wi
63. monitor trolley should be provided for mounting 2 monitors and should have 2 shelves for keeping memory and stabilizer amp isolation transformer C ARM STAND It should be ruggedly built and should be of good designed It should have steering for controlling back and front wheel movements It should also have the below mentioned movements Horizontal travel should be 210mm or more Orbital movement should be 90 25 degrees Panning movement should be 12 degrees Focus to I I distance should be 900mm or more Vertical movement should be motorized of 450mm or more Focus to I I clearance should be 800mm C Arm rotation should be 270 degrees or more IMAGE MEMORY amp ESSENTIAL ACCESSORIES Image memory of 100 frames permanent storage or better Contrast stretching and negative image facility Digital image rotation for orientation Full functioning of IR remote control 7 KVA stabilizer amp isolation transformer to be provided It should run on single phase 230 volts 15 Amps 3 nos quality approved lead aprons to be provided The quoted model should have AERB NOC or AERB Type approval And International CE FDA 57 RAPID Sterilizer State of the Art fully automatic Trauma use autoclave with dry cycle having following features e Fully Automatic table top type front loading autoclave of min 22 litres or more Capacity with facility of triple vacuum cycle At least 2 or 3 Separators trays to hold different type of instruments Ma
64. ng on the requirement of the user at the time of installation or during service based on the customers request The processor should have capacity to process atleast 140 films per hour 12 x 10 size or over 80 films of 14 x 17 Developer and Fixer temperatures should be adjustable in steps by the user Drier temperature should be adjustable if needed amp The minimum capacity of the developing fixing and water tanks should be 5ltrs or more There should be a reservoir provided where fresh chemicals of 20ltrs can be stored There should be a provision for replenishment of fresh chemicals from the reservoirs automatically based on the films processed The amount of chemicals replenished should be adjustable depending on users request Fresh water for rinsing the films should be circulated into the wash tank This should be controlled automatically mention liters per hour The processor should be controlled by a micro processor with display of Bath temperature Should have provision to put the machine on standby mode automatically when not in use The processor should be in a ready state and respond immediately upon insertion of a film to process All bath temperatures should be automatically maintained even during standby mode The bath dryer should have jets venturies that ensure uniform drying of films across the entire area Please provide technical documents and explain how to avoid wet patches non uniform drying The processor tanks should
65. olley It should be CE FDA certified 63 TABLE TOP CENTRIFUGE Capacity 16 tube x 15ml amp 24 tube x 5ml Construction Built in time and speed regulator with suitable speed indication and lid lock system RPM 5500 6000 rpm Digital Display RPM amp TIME Power supply 220 240 volts single phase 50 cycles plus minus 12 AC Line Voltage Corrector A line voltage corrector of suitable rating should form part of the configuration as per IS 9815 89 Should be CE FDA ISI certified or equivalent 64 RH VIEW BOX Construction Built with best quality Finished Sunmica Coated plywood Upper side is covered with Imported Scratch proof Acrylic Sheet Size approx 600mm x 150mm Light Two Nos of Tube Light 1 5 ft length Control panel On Off Switch Power supply 220 240 volts single phase Page 34 of 44 It should be ISI CE FDA certified or equivalent 65 BLOOD BAG TRANSPORT BOX Blood Transport Cooler Box Support AC110 240V DC12 24V 7 4V battery Keep 2 8 C under 32 C 1 5L Capacity CE rohs Blood Transport Cooler Box is Portable for vaccine biological blood specimen or other heat sensitive medication distribution and turnover on outdoors Suitable for individual immunization stations health centers CDC Bureau of Animal Husbandry etc Standard packing Ipc cooler 1 car adaptor 2 charger 2 batteries 1 accessories bag Specification Size L W H 240 170 195mm Volume L W H 180mm 100mm 80mm Setting temp 2 8 C un
66. one Humidifier bottle should be unbreakable reusable to disinfectants and complements Theatre Vacuum Unit It should fully meet and complies as per EC Directive 93 42 EEC Annex IL article 3 full quality assurance system medical devices It should be CE FDA certified It must consist of the following Ino Suction Regulator and 2nos 4000ml polysulphone collection jar and both to be mounted on a trolley Suction Regulator Suction regulator should be supplied with a safety jar including and antibacterial filter and an anti overflow safety device Should have wide membrane continuous suction controller Should have vacuum levels 0 1000mbar hPa Should have vacuum gauge fitted with a protective bumper device Should have on off knob allowing for the quick restoration of a readjusted vacuum level Must have central adjustment knob with a color coded for 0 1000 mbar hPa Should have polycarbonate 150cc safety jar autoclavable at 121 C unbreakable fitted with an anti overflow safety device and equipped with a plastic antibacterial filter Suction regulator must have a unique serial number stamped on the body of each suction regulator thereby allowing for identification and trace ability Polysulphone collection Jar of 4litres with lid it should be unbreakable and autoclavable upto 134 C must be fitted with an extremely simple anti overflow safety device thereby ensuring easy maintenance Should be totally transparent they
67. ory storage compartments Safety The unit shall be safe to use both for the operator and the patient The unit must comply with IEC 601 1 for leakage currents Service Life Under normal usage the unit shall have a service life of not less than five years excluding routinely replaced items such as a battery accessories etc Hard Paddles is to be provided ECG Monitor Display The unit shall have a high resolution LCD display for ECG viewing The unit shall offer ECG monitoring capability The device shall have the capability of displaying an ECG waveform on the Liquid Crystal Display ECG signal shall be via disposable defibrillation electrodes Frequency Response 0 5 to 40Hz The unit shall display a heart rate The heart rate range shall be 20 to 300 BPM The unit shall display battery performance gauge The unit shall provide an ECG Sweep Speed of 22 5mm or 25 mm second Defibrillator The device shall have the option of a pass code protected manual override to allow for use by Advanced Cardiac Life Support Personnel The optional manual mode shall incorporate low energy settings within the range of 5 to 50 Joules The defibrillator shall incorporate a load compensation circuit to adjust the Defibrillation waveform based upon the patient s impedance to precisely deliver the selected energy The defibrillator must be capable of the energy selection up to minimum 150 Joules and above The defibrillator shall charge to 150
68. ould the primary supply fail The emergency reserve manifold shall be provided with a lockable isolation valve to enable positive tamperproof isolation for maintenance The emergency reserve manifold shall be supplied fully assembled and tested Terminal Units Gas Outlets with probes Adaptors Supply Installation Testing and Commissioning of Medical Gas Terminal Units Gas Outlet Points It shall fully complies amp meets with the requirements of the UK DOH Health Technical Memorandum 02 01 HTM 02 01 It should be CE FDA certified Medical gas terminal units shall be manufactured under an ISO 13485 2003 quality management system A copy of the certificate of registration shall be provided for review Terminal units shall have gas indexing geometry to BS 5682 1998 Other gas specific indexing geometries are not acceptable It should have antimicrobial coating Gas specific components comprising the terminal unit second fix shall be manufactured from die cast zinc alloy or similar hard wearing metal Plastic components are not acceptable It should be 100 metal Terminal units socket castings shall be permanently coated with a low friction fluoropolymer for maximum reliability and service life The terminal unit socket die casting shall incorporate a gas indexing pin to overcome the risk of loosening due to rough handling or abuse The second fix socket shall incorporate a sheer plane to safeguard the first fix and pipeline in the event of ac
69. ranging from 1 to 120 Watts in increment of 1 Watt and an unmodulated sinusoidal waveform of the HF voltage 3 Safety Features The Safety class should be Class I and Type CF according to IEC 60601 1 4 Technical specifications Input voltage 200V to 230 V AC 50 Hz Current Fuse 5A 5 Standard Accessories 15 Cable for patient plate Silicon Rubber Patient plate assembly Double Pedal foot switch Knife electrode blade Ball electrode Reusable electrode handle Power cord Transport Ventilator Function modes cmv cmvsig Auto controlled assisted Amv pem mym Cpap 02 gt 40 if air mix on and gt 90 if air mix off Frequency from 5 to 40 bpm Flow from 2 to 20 Ipm Peep from 0 to 20 mbar Ve ratio 1 2 0 5 1 1 1 in auto mode and trigger ombar Pressure limit from 5 to 60 mbar Trigger from 0 to 10 mbar Inhaler flow from 0 to 15 Ipm Alarms pressure max gt 55 mbar adults gt 30 mbar children Pressure min lt 10 mbar Page 18 of 44 Apnoea spontaneous breathe stopped Oxygen source failure Battery low SNC hazardous selection acoustic only Dimensions 240x128x140 mm approximately Power supply 12 v dc 1 2 a as well as vehicle dc power inlet Autonomy gt 6h 16 17 18 19 20 Preferably should have both non invasive as well as invasive capabilities And have both pressure as well as volume control modes Should have wide range of applications from chil
70. roscope 18 19 20 21 22 3 Monitor 7 parameter Grabner Authantic GB Remi Labtop Narang Surya Yorco Medikraft Heine Visualux Welch Allyn Berchtold Stryker Karl Storz Luxtel Thermo Dyne Ultra Clean Surya Narang Yorco CRP Medikraft Vision Care Labomed Medimech Optofine Lica Olympus Carl Zesis Tagagi Philips Infinium L amp T Medical Welch Allyn Medion Sure View Philips Infinium L amp T Medical Welch Allyn Medion Sure View Page 42 of 44 Philips Infintum L amp T Medical Welch Allyn Medion Sure View Syringe infusion pump B braun Hygeia Top Smith Medical Simtop 30 kW HF X Ray with automatic film Philips Trivitron Allengers Shimadzu Italray processor Siemens GME Vision Meditech Medex 100 ma X ray machine BPL GME Allengers Adonis Samon Siemens Shimadzu Vision Meditech Medex Color Doppler Philips Samsung Medison Aloka Esaote Wipro GE Sonoscape Siemens Sonosite 29 Defibrillator Philips Schillar Cu Medical Primedic Zoll 24 Central STN with cabling 2 2 2 2 2 Bipap Philips Resmed Re Smart DGC Sinopharm Kare medical C arm image intensifier Philips Trivitron Allengers Comed Technix Shimadzu Vision Meditech Rapid sterilizer Laoken Sakura Gettinz J amp J Acmas Celitron LAPAROSCOPE with camera Olympus Wolf Carl Storz Reema Pentax
71. shall be provided for review Area Valve Service unit Modules shall be supplied pre wired and tested complete with pressure switches and medical gas area alarms The chassis and cover shall be manufactured from powder coated 16 swg steel Each area valve service unit shall be fitted with an emergency access mechanism on each door The area valve service unit modules shall be configured for one to five gases services depending on the hospital area served with the option of an inbuilt medical gas area alarm panel Incorporate a valve with NIST connection at either side of the AVSU valve AVSU ball valves shall be manufactured from die cast nickel plated brass alloy with flanged connections AVSU ball valves shall benefit from low torque operation and shall be serviceable from the front by a removable cap providing access to the valve stem chrome plated brass ball and a single piece molded nit rile seal e Through spades shall be provided either side of the valve and each valve shall be provided with a blanking spade for deployment during installation or modification of the system without interruption of the main supply The NIST connectors forming part of the stub pipes shall incorporate a check valve with metal seat thus avoiding the possibility of degradation over time Medical Gas Alarm Main amp Area To comply and fully meets with the latest standard HTM02 01 and C11 It should be CE FDA certified e Master Alarm
72. static controlled taps with fail safe temperature controls All units will have reduced anti splash fronts Knee operated switch should be offered 44 Blood Bank Refrigerator It should have following specification Voltage 230v 50hz Capacity 250 liters 200 bags Temperature 2 c to 10 c Accuracy 0 1 c Microprocessor control panel Monitoring digital display Self diagnosis Alarm messages are stored Data logger T or more LCD display 6 pull out sliding stainless steel drawers with 250 colour coded plastic buckets Bacteria resistant powder coated exterior Fully automatic defrosting cycle Single transparent heated dual pane insulated glass door removes fogging amp condensation Internal structure Anti corrosion 304 stainless steel with rounded edges for easy cleaning and perfect hygiene Shelves adjusted in height Insulation Thickness of 60 mm Obtained by injection of high density ecological polyurethane foam without cfc Auto condensate evaporation system It should be ISI CE FDA certified Cooling system Airtight compressor with thermal protector and finned package air condenser copper tube and aluminium fins with propeller blade Ecological cooling gas Control should have following features e Whole System protected by password Page 23 of 44 e Set Temperature Display amp Read Temperature e Temperature Range 99 9 C to 99 9 C e Audio visual alarm for
73. t Vacuum System Supply installation Testing and Commissioning of Medical Vacuum Plant The Medical vacuum plant shall fully comply with the requirements of the UK DoH Health Technical Memorandum 02 01 HTM02 01 It shall be CE marked with CE No from a notified body amp certificate of Origin must be provided The medical vacuum plant shall be manufactured under an ISO13485 2003 quality management system A copy of certificate of registration shall be provided for review 2x5 5KW each rotary vane vacuum pump vessel mounted 2x1500 litres capacity horizontal vertical vacuum receiver tanks 54mm OD pipe work It should have digital display Page 39 of 44 e It should have all regulators which should be adiabatic certified e It should have EMC certificate in compliance with section 3 55 in HTM 02 01 e Compliant with C11model engineering specification Vacuum pump inlets shall include a wire mesh filter and integral non return valve to prevent oil suck back and pressure increases in the vacuum system Each vacuum pump shall be fitted with anti vibration pads between the pump foot amp mounting frame Plant shall be fitted with four equally sized bacteria filters arranged in sets of two Each individual filter shall have the capacity of deliver half the design flow such that one set is designated duty and the other standby Bacteria filters shall have efficiency at least 99 999 when tested by the sodium flame method in accordanc
74. t Child or Infants It can also be operated from Gases by simply turning the suction knob Supplied with suitable suction Catheter Page 16 of 44 ad Re n n n n Intubation Set Laryngoscope with Three blades and Handle Endotracheal Tubes with cuff and plain four sizes sterilized Endotracheal connection Set of 12 Magill s introducing forcep Mouth bite Surgical Instruments Kit mosquito artery forceps curved 5 inches longwith sharp tip mosquito artery forceps straight 5 inches long with sharp tip needle holder fine tip 8 inches long to handle suture of 3 0 4 0 amp 5 0 skin hooks sharp tip 8 inches long B P handle no 2 B P handle no 3 allies s forceps 8 inches long 2 1 tooth adsan s dissecting non tooth forceps 5 inches long adsan s dissecting tooth forceps 5 inches long fine langenbach s retractor with 5mm blade fine langenbach s rectrator with 1cm blade fine tip right angle mister forceps 6 inches long with tungstan tip fine metzenbaum curved scissors 6 inches long tungstan carbide tip and golden grip fine mitzenbaum straight scissors 8 inches long tungstan carbide tip and golden grip fine eye retractor c shaped 6 inches long littlewood s tissue holding forceps 8 inches long lane s tissue holding forceps 8inches long suction tip 12 inches long suction tip 9 inches long fine tip with proximal hole cheatle
75. t the following modes IPPV CMV SIMV CPAP PEEP BIPAP Non Invasive PCV PRVC APRV pressure support ventilation non invasive ventilation e Parameter settings Tidal volume 50 2000 ml frequency 5 60 per minute flow up to 180 lpm peep pressure support 0 30 mbar i e 3 1 to 1 3 Trigger sensitivity 1 10 Lmp inspired oxygen 21 100 e Alarms Page 9 of 44 oOo00 0 0 O 0 0 9 O O 0 070 0 0O 070 0 O07200 6 IN 1 2 1 3 1 4 1 6 1 7 Audio visual alarms for limit violations User defined independent for all parameters Context defined as per settings Preferably the alarms should be provided e g Life threatening serious and advice only Special functional modes Inspiration hold Bronchial suction automatic pre oxygenation amp detection of disconnection and reconnection Standby in user defined parameter settings Monitoring amp display of monitored functions All measured amp calculated values Air way pressure peek mean peep plateau tidal volume expired minute volume total amp spontaneous I e ratio rate total amp spontaneous Inspired oxygen amp Temperature Curves pressure vs Time flow vs Time and loops pv fv Trends for 72 Hrs On a large colour touch screen of size not less than 12 diagonal Oxygen enrichment Should be possible to blend oxygen and air from wall outlet in exactly definable per
76. ter assembly with 5 tube with possibility of enabling or disability air or N2O and Activating as per requirement 6 Automatic Cutoff of Nitrous by Oxygen Pressure failure along with hypoxic guard for linear regulation of minimum O2 concentration at 25 volume and a base flow of 200ml 7 Oxygen flush which is able to deliver at least 30 70 liters per minute of oxygen 8 Single canister integrated circle absorber with unidirectional and airway pressure relief valves integrated sensing mechanism It will have facility for changing the soda lime intra operatively with soda lime capacity of about 900 gms 9 Fully integrated Circle absorber system for adult as well as pediatric patient category It will have an autoclavable block 10 It will have a spirometery sensor position able to Y or at the digital end for measurement of I E Tidal vol Minvolume loops and scalars etc 11 Integrated LED light 12 It will have an integrated color TFT screen of at least 8 size for display of ventilation parameters etc 13 Vaporizer provision to connect two vaporizers at a time with interlocking facility One Isoflurane Halothane Sevoflurane vaporizer will be supplied with the machine Vaporizers flow will be temperature and pressure compensated and maintenance free 14 Active Scavenging System Will have integrated active scavenging system Integrated Anaesthesia Ventilator 1 Microprocessor based electronically controlled and electrically pneu
77. terials with one removable tray Digital display LED or LCD of temperature time and pressure to show curve amp words The pressure and temperature of the autoclave should range form 15 PSI at 121degC to 30 PSI at 134degC The body and trays of the autoclave should be made from corrosion resistant stainless steel Provided with Micro bacterial filter For safety the equipment messaging and warning system should be present Fully microprocessor controlled management for constant monitoring of parameters and control of the autoclave functions with 4 cycles as under A 2 Cycles for unwrapped loads 134degC 4min 121degC 20min B 2 Cycles for wrapped loads 134degC 4min 121degC 30min Separate tanks to prevent recycling of water Auto shut off amp stand by mode One water filling tank together with one pipe connection Automatic Functioning with automatic self cleaning of pipe steam generator pipe and other parts after every 100 or 150 cycles of use Thermodynamic initial vacuum Top design reservoir for convenient watering and cleaning Automatic drying system Micro switch to confirm door closure Page 31 of 44 Safety valve amp Safety thermostat The system should be easy to use User friendly The unit should preferably be CE FDA marked The same unit should have facility to upgrade in future for connectivity to External Thermal printer or Inbuilt thermal printer facility to keep record of every cycle during use
78. th flicker free image with tilt amp swivel facility 12 TIt should built in Image Management software 13 The system must have archive capability for storage and retrieval of images and clips with hard disc of 80GB or more 14 System should have direct connectivity to color printer for printing images amp reports Page 28 of 44 15 It should be European CE FDA approved 16 System should have extensive calculation software packages for General Imaging Obs Gynae and abdominal Imaging 17 Inbuilt DVD Drive with the facility to transfer Images 54 MANUAL DEFIBRILLATOR with AED The following specifications define a portable lightweight battery operated automated external defibrillator to treat patients requiring basic and optional advanced cardiac life support The equipment shall be capable of monitoring patient s ECG deliver defibrillation energy and document critical ECG medication even It should be CE FDA certified Physical Specifications Weight Complete unit excluding batteries shall preferably be lightweight Dimensions To aid in storage and portability Machine should be portable and compact Device Construction The case shall be constructed to withstand the standard operating conditions in a physician s office and or hospital The device must also withstand the harsh operating conditions associated with ambulance use An optional carrying case with handle and shoulder strap must be available with access
79. tificate of origin It should have all regulators which should be adiabatic certified It should have EMC certificate in compliance with section 3 55 in HTM 02 01 Compliant with C11 model engineering specification Each cylinder bank shall be fitted with an isolation valve to enable continuity of supply through temporary manual operation in the vent of primary supply failure The manifold control panel shall provide a minimum flow of 1500 l min to the nominal 400 kPa medical oxygen pipeline system An emergency reserve alarm of 68 bar falling pressure shall be provided for each cylinder bank actuated by bourdon tube pressure gauges with integral alarm contact connected upstream of the bank isolation valves Piston or diaphragm type pressure switches are not acceptable There shall be two separate stages of pressure regulation to enable high peak flow rates without a reduction in line pressure Multistage regulators combined into a single unit are not acceptable Pressure regulators shall comply with BS EN ISO 10524 2 All pressure regulators shall be protected from over pressurization by relief valves that are vented to atmosphere The line pressure relief valve shall be provided with easing gear A non return valve shall be provided within a line pressure manifold block and shall provide gas tight isolation in the event of any upstream component failure The non return valve shall automatically bring the emergency reserve manifold into service sh
80. uirements 2 4 Bed extension integrated sliding bed extension and mattress retainer 25 Should be supplied with suitable mattress and pillow e Over Bed Table With Table Top Dimensions gt 40 cm x 80 cm Height Adjustment Lowest 70 80 cm amp Highest 100 110 cm It should have minimum 4 castors Side Rack Bed Side Cabinet It should have one top drawer It should have one open compartment It should have minimum 4 castors It should have a practical patient friendly towel holder accessible from the bed Bedpans should easily be stored in mountings underneath the bedside cabinet It should have following technical specification e Width gt 40 cm e Depth gt 45 cm e Height gt 75 cm 3 Recovery Trolley Stretcher The adjustable height and the several available accessories make quicker and easier to move the patient from every diagnostic equipment and to meet any first aid intervention Important features of quality and efficiency are the lightness and the balancing in the movements Moreover cleaning and sanitization operations can be rapidly and easily performed Safety for patients and operators is ensured by the side rails with complete disappearence or dismountable safety belts as standard equipment The wheels can be locked at the same time for a better stability The lying surface is divided into three or more sections and made of radiotranslucent laminate with external frame made of thick tubular
81. urface 25 37 Overall length 80 85 Overall weidth 32 36 Maximum head elevation 90 Trenderburg and reverse trenderburg min 18 Should have integrated min 2 stage IV pole Should be supplied with suitable mattress min 3 and pillow Should have 6 or more caster Brakes straight steering engaged by color coded foot levers on both sides of the bed CE FDA will meet requirement a Crash Cart amp Instrument Trolley Crash Cart Overall size approximately 940mm x 500mm x 1540mm Mild steel tubular framework Six coloured removable bins and two polystyrene lockable storage units with three drawers each Four swiveling castors of 125mm dia or more two with brakes corner rubber buffers Oxygen cylinder holder Complete stainless steel Electric examination lamp Cardiac massage board Stainless steel i v Rod Wooden laminated shelves Instrument Trolley Overall size approximately 1000mm 1 x 510mm w x 900 mm h Complete stainless steel Stainless steel shelves Top shelve with three four sides guard rail Stainless steel mild steel with epoxy powder Coated tubular frame work Mounted on approximately 750mm swiveling castors Blood Gas Analyser for Level II station Fully automatic fast and economical blood gas amp electrolyte analyzer It should measure the following parameters ph po2 pco2 na k ca cl glucose thb so2 o2hb cohb amp
82. urs Single Arm Moveable Pendant for Operation Theatre To comply and fully meets with the latest standard HTM02 01 NFPA 99C UL listed or any other international standard which meets the specification It should be CE FDA certified Pendant should provide a convenient overhead supply of electrical services and medical gases Vacuum and electrical services thus eliminating the majority of trailing hoses and cables It should also provide all the features of the Rigid Pendant with the additional facility of being height adjustable by theatre staff using the hand held control Should have universal first fix accepts retractable second fix pendants The pendant which should be adjustable in length must have upper and lower casings of powder coated steel with a stainless steel fascia plate Should have standard telescopic adjustment 300 mm adjustments Each pendant should have 4nos 6 16amp multipin electrical sockets Each pendant should have provision only for maximum 6 8nos gas outlets points Laminar Air Flow System for operating room o Plan air ceiling construction out of 2mm thick extruded aluminum sheet provided with HEPPA filters o HEPPA FILTERS Having dust spot efficiency of 99 97 0 3 micron Air and light diffuser made out of 2 layers of MONO FILAMENT PRECISION WOVEN POLYESTER Fabric for the Plan air ceiling to give a laminar flow of filtered air It also provides a diffused shadow less lighting systems with a control on the intensity o
83. ustable 1600mm to 2400 mm ISI CE FDA mark or equivalent Dressing Drums S S 15 In High X 15 In Diameter ISV CE FDA certified or equivalent Required one each of following siges i 275 X 240 MM 275 X 132 MM ii 350 X240 MM 350 X 130 MM iii 380 X 300 MM S S Instrument Tray with Cover 15 INX 10 INX IN ISI CE FDA CERTIFIED or equivalent Required One Of Each Size a 200X 150 MM b 250 X 200 MM ce 300 X250 MM d 350 X 250 MM e 450 X 300 MM Waste Linen Plastic Drums e Size 100 litre capacity e It should be ISI CE FDA certified or equivalent e Should be colour coded as per pollution control guidelines Page 19 of 44 21 22 23 24 25 26 27 28 Waste Disposal Plastic Drums e Size 100 litre capacity e It should be ISI CE FDA certified or equivalent e Should be colour coded as per pollution control guidelines S S Kidney Tray 500 ml capacity ISI CE FDA certified or equivalent One of each of the following sizes iv 150 X 70 MM v 200 X 90 MM vi 250 X 100 MM vii 300 X 130 MM S S Bowl 250 ML It should be of good quality branded ISI CE FDA certified or equivalent One of each of the following sizes i 125 x 57 capacity 500 ml half curl open rim ii 160 x 75 capacity 1200 ml half curl open rim iii Small capacity 50 60ml S S Basin 2000 ML e Mild steel tubular frame On 3 swivel twin wheel non rusting castors 50 mm dia 2 ss bowls of 2000 ml cap
84. utlets Oxygen 2 Air 4 Bar 2 and Vacuum 2 HTM02 01 C11 Each Bed Head Panel should also be Pre fitted and Pre wired 8nos Multipin electrical switch and sockets 6 16amp e Ino RJ45 data socket e Ino Nurse call switch also be incorporated in panel Bed head Panel must also have tubular T5 Fluorescent lamps with electronic control gear for reading examination lighting Segregation of services i e Low voltage supplies High Voltage supply and Medical gases shall be maintained through out N20 Cylinder Emergency System Page 40 of 44 The emergency reserve manifold shall fully comply with the requirements of the UK DoH Health Technical Memorandum 02 01 HTM 02 01 It should be CE FDA certified The nitrous oxide manifold supply system shall consist of An automatic changeover manifold control panel hereinafter referred to as manifold control panel complete with cylinder header racks and tailpipes with capacity for high pressure gas cylinders An emergency reserve manifold complete with cylinder header racks and tailpipes with capacity for high pressure gas cylinders The permanently connected emergency reserve supply shall be brought into operation automatically via a non return valve and shall be designed where practicable to provide the same flow rate as the primary system There shall be sufficient cylinder capacity within the emergency reserve supply to supply the average anticipated demand for a minimum of four ho
85. y connected emergency reserve supply shall be brought into operation automatically via a non return valve and shall be designed where practicable to provide the same flow rate as the primary system There shall be sufficient cylinder capacity within the emergency reserve supply to supply the average anticipated demand for a minimum of four hours Fully Automatic Control Panel for Oxygen It shall fully complies and meets with the requirements of the UK DOH Health Technical Memorandum 02 01 HTM 02 01 It should be CE FDA certified The manifold control panel shall be manufactured under an ISO 13485 2003 quality management system A copy of the certificate of registration shall be provided for review It should have EMC certificate in compliance with section 3 55 in HTM 02 01 Compliant with C11 model engineering specification The manifold control panel shall be designed and certified for use with oxygen at 200 bar and 60 C Auto ignition testing shall be carried out and a copy of the test report shall be shall be provided for review The manifold control system shall provide an uninterrupted supply of medical oxygen from equally sized high pressure cylinder banks via a suitable arrangement of pressure regulators providing a constant downstream nominal pipeline gauge pressure of 400 kPa The manifold control panel shall provide a minimum flow of 1500 l min to the nominal 400 kPa medical oxygen pipeline system The manifold control panel shall be no wider
86. y rate Vt trigger and cycle indicators SpO2 and heart rate when ResLink and oximeter are connected results screen Usage and efficacy data leak Vt respiratory rate minute ventilation spontaneous trigger and cycle AHI pressure 56 C ARM IMAGE INTENSIFIER UNIT The unit should be high quality unit having the below mentioned specifications GENERATOR It should be digital with feather touch controls It should be of high frequency with output of 5 KW or more and frequency of min 40 KHz The KV range should be from 40 to 120KV in steps of 1 KV The fluoroscopic mA should be upto 4 mA or more The radiographic mAs range should be upto 200mAs or more Radiographic mA up to 70 mA or more Pulsed fluoroscopy should be possible The x ray tube should be dual focus rotating anode The focal spot of the tube should be 0 5mm and 1 5 mm or better and anode heat storage capacity of 200 KHU or more Page 30 of 44 The digital display of fluoro mA KV timer amp radiography mAs should be provided and the display should be micro controller based LCD Display There should be independent selection of KV amp mAs The control should have indicator for power on LI T V SYSTEMS amp MONITORS The image intensifier should be of latest series It should be of 9 tripple field i e 9 6 4 with CCD Camera The circular grid 108 lines should be fixed on the I I to improve the image quality 2 nos 17 TFT monitor should be supplied The
87. ystem should be able to move into a lift and all patient access areas The unit should use Hi Frequency X ray Generator Technology of 40 KHz or more Required Ratings HF Generator Minimum 30 KW or Higher 400 mA or better 125 kVp or better 200 mAs or better The unit should have easy manual movements and must be easy to maneuver within the Hospital areas surgical rooms intensive care emergency wards etc Should be a fully integrated light weight mobile unit with a easy to use X Ray System Should have excellent movements and easy to turn eoo000 GENERATOR High Frequency generator with microprocessor control Tube overload protection with continuous Monitoring X Ray Tube Heat Units Programmed anatomical technique with storage of program Safety features for overload tube current KV tube rotation etc and auto test for unit 30 KW or higher X ray generator with a max of 125 KVp or more that should be able to work on 12 amps current 230v supply 15 amps power plug available at trauma center mA range 50 to 400 mA or more KV range 40 to 125 KV or more Time range from 1 1 ms to 4 sec or more CONTROL UNIT Feather touch control panel with LCD display for Data and massage Anatomical technical selection and KV amp MAS increase and decrease facility MOBILE UNIT amp TUBE STAND COLUMN The unit should have easy manual movement with break Unit should have a multi leaf collimator The tube stand column

Telecommunications Consultants India Ltd.

Contents

Download Pdf Manuals

Related Search

Related Contents