RadarHAWK™ SM RadarHAWK™ SM
Contents
1. City Reduced to 20 Full sensitivity TEST Mode Press and hold the BAND button for longer than 3 seconds and the unit will demonstrate how it operates when radar and laser signals are detected The unit will displays every visual alert message along with the corresponding unique audio alert After the tutorial sequence is all done the screen will stay at the all indicator on status for 5 seconds and then back to the stand by mode X K Ka LASER BAND ON OFF Press BAND button to turn X band detection off or on Automated Functions Features Protection against VG 2 The unit is completely invisible to undetectable by the VG 2 interceptor Alert Priority The unit will report on a FIFO First In First Out basis However when there are laser signals detected at the same time it will report by the following priority rule Laser signal Radar signal Using POP Mode Press the CITY button for three 3 seconds to turn POP mode ON or OFF Once you select this mode the unit gives one beep for POP On and two beeps for POP Off The factory default is POP OFF POP mode ON or OFF is stored in the memory Note POP Mode works only with power cord operation it does not work with battery operation IZ Understanding Your Radar Detector The RadarHAWK SM detects radar signals by audio alert and indicator while driving The audio alert and indicator2. ALL BAND X K Ka ULTRA HIGH PERFORMANCE SOLAR POWERED RADAR LASER DETECTOR RadarHAWK SM USER MANUAL E Introduction sophisticated solar radar laser detectors The RadarHAWK SM is a completely integrated radar laser detector which responds not only to all the radar guns in use today but also to the other latest development in speed monitoring devices the laser gun i Table of Contents Important Safety Cautions Controls Indicators and Connections Accessories Installation Feature How to Use Se ee ee a Understanding Radar Detector Troubleshooting Specification 1 2 3 4 5 6 T 8 9 Important The RadarHAWK SM is not designed to help you disobey the law and its manufacturer doesn t take using the RadarHAWK SM A defensive driver always obeys the posted speed limit and driving methods T Important Safety Cautions Read this book and understand how to use the RadarHAWK SM Keep this book and refer in each case Follow the cautions in this book for safe use of this unit or it may lead accidents E Locate this unit on the passenger side windshield If located on the driver side windshield it may obscure the driver s view m Don t get the unit wet Electrocution Hazard Death or Serious Injury can result m Don t operate this unit while driving m Don t open the housing case of this unit m Stop the use of this unit if it is very hot has a st
3. 2 adjust the bracket screw to Windshield change the angle After the angle becomes level tighten the screw firmly A 6 Plug the power cord into the detector unit 7 Plug the cigarette light adapter of the power cord into your vehicle s cigarette lighter socket Dashboard Mounting When you set the unit on the dashboard suction cups and rubber foot become unnecessary Keep them in case you change the installation location 1 Place the detector unit on the dashboard to find a location where the unit has a clear level view of the road 2 Remove the paper backing from one 1 side of the triangle two sided tape and attach the sticky side of two sided tape on the bracket 3 Attach the bracket to the bracket socket on the bottom side of the detector unit 4 Remove the paper backing from the other side of the triangle two sided tape and attach to the location you set the unit on the dashboard Pay attention to set the radar rear side in the direction of travel If necessary adjust the bracket screw to change the angle After the angle becomes level tighten the the screw firmly Dashboard 5 Plug the power cord into the detector unit 6 Plug the cigarette light adapter of the power cord into your vehicle s cigarette lighter socket 5 Features User Interface A power switch at the left of the unit A volume controller at the right of t
4. warning lights change in accordance with an increasing or decreasing of radar signals Frequency of Radar Laser Signals X band 10 525 GHz K band 24 125 GHz 24 150GHz Super wide Ka band 33 400 36 000GHZz Laser 905nm Police Speed Control Machine The RadarHAWK SM detects radar transmitters that measure the speed of vehicle Automatically the transmitter will take a photo of the speeding vehicle There are a variety of types such as Stationary Installation Type Gun Type and Car Portable Type Radar detector may detect interruption signals from Automatic door Wireless CCTV system Vehicle monitor system Mobile phone radiation base 8 Troubleshooting Confirm the following points if any problem is found Trouble with Power On Operation Battery exhaustion battery shutoff Recharge by the cigarette adapter cable Power switch is off turn on the power switch Trouble with Battery Recharge Sunlight is not enough Confirm it can be recharged by the the cigarette adapter cable Blown fuse Change the fuse in the cigarette adapter plug Duration of rechargeable battery life Use the unit with the cigarette adapter cable Trouble with Sound No Sound Power switch is off turn on the power switch Setting of the sound is low Change the setting Band function is off press the BAND button and change the mode City mode is on press the CI
5. TY HIWAY button and change to the Highway mode The police transmitter doesn t use the radar system The police transmitter is off 9 Specifications Bands and Frequencies Band Frequency Tolerance X band 10 525GHz 25MHz K band 24 125GHz 100MHz 24 150GHz 100MHz Superwide Ka band 34 700GHz 1300MHz Laser 905nm 50nm Main Specifications Detection format Dual conversion superheterodyne Operating voltage 12V DC max 16V DC Rechargeable battery built in 3 6V 400mA NiMH battery Operating temperature 10 to 60 C 14 to 140 F Storage temperature 20 to 85 C 4 to 185 F Stand by time appx 10hrs with fully charged battery Dimension W x D x H mm 72 x 122 x 32 2 Weight appx 140g RadarHAWK SM FCC ID U9P RH SM This device complies with part 15 of the FCC Rules Operation is subject to the following two conditions 1 This device may not cause harmful interference and 2 this device must accept any interference received including interference that may cause undesired operation by Q3 Innovations LLC in writing could void the user s authority to operate this product
6. de P LED is always blinking with red color APS function should be operated both in the 12V LINE MODE and BATTERY MODE Sensitivity adjustment There is a piezo vibration sensor function added to the circuit The sensitivity control operation is as follows 1 Sensor Sensitivity High Middle Low 3 steps Factory default is MIDDLE for low vibration sedan car 2 Press and hold APS button for three 3 seconds to enter sensor sensitivity control mode 1 beep 3 Select HIGH or MIDDLE or LOW using the APS button short press then press and hold APS button again for three 3 seconds to store and exit this mode 4 You can determine the mode with the warning lamp LED blue display as follows High left ON right ON Middle left ON right OFF Low left OFF right ON oe APO Automatic Power Off To conserve battery power the unit will automatically shut off when there is not a detected vibration signal for 15 minutes APO function operates in both APS on and off mode APO function should be operated under alerting APO function should be operated both in the 12V LINE MODE and BATTERY MODE To conserve battery power the unit will operate in Idle mode when the unit is shut off If a vibration signal is detected the unit will turn on to resume detection Memory Retention The unit keeps some of the operation modes in its memory even after the unit is powered off so that the
7. he unit Three function buttons on the top of the unit APS SENS APS on off on 1 beep off 2 beeps with a short press default is APS on Press SENS to set APS sensitivity BAND X band on off on 1 beep off 2 beeps default is BAND on CITY City Highway City 1 beep Highway 2 beeps default is HIGHWAY APS SENS BAND TEST CITY HIWAY Main Features Detects all radar laser bands Undetectable by VG 2 Detects POP mode radar when power cord is used 360 degree laser coverage LED display Highway City mode Detection sensitivity selection Auto mute function Auto Dim LED brightness APS Auto Power Save on off APO Auto Power Off Low battery alert Retains memory on previously set operation modes after power off a Test mode to demonstrate operations Mounts on windshield and dashboard Operates on the battery or a 12V power adapter Rechargeable by solar cell X Band ON OFF a Built in rechargeable battery NIMH AAA2 3 400mMA 3 6V LED Display Warning LED 2pcs Lamp type LED Blue color left and right side Power chip LED dual color Green Red APS on mode Green blinking APS off mode Red blinking X Green color a K Red color a Ka Yellow color Laser Red color WARNING WARNING 6 How to Use Power Connection Slide the power switch towards the display to turn the unit on If the unit has low battery s
8. range odor or is emitting smoke m Use within the temperatures of 10 to 60 C 14 to 140 F Don t leave the unit in car under high low temperature Failure will result m Before leaving your vehicle always remember to conceal the unit in order to reduce the possibility of break in and theft m Don t drop or put excessive force on the unit m Under high temperature this unit can become very hot Don t touch the unit until it is cool enough to avoid burns m Obey the traffic laws in your area m Don t use the RadarHAWK SM if the unit is illegal in your area B Notes and precautions for solar cell and built in battery Plug in the provided cigarette adapter cable to charge the built in battery for the initial use of about 10 days driving a 5 hours of charging by the provided cigarette adapter cable fully charges the built in battery Solar battery is designed to support the built in battery after RadarHAWK SM gives battery alert Plug in the provided cigarette adapter cable to charge the built in battery if RadarHAWK SM gives battery alert Solar battery can charge built in battery even while the power is OFF Stand by time of detector with full charged battery is approximately 10 hours but running time depends on the detection warning conditions High low temperature can effect the charging time Solar battery cannot provide adequate charging electricity
9. tatus Plug the adapter of the power cord 12V DC into the lighter in your vehicle and the connector at the other side of the power cord into the power jack of the unit Start Up amp Self Test Slide the power switch towards the display to turn the unit on When powered on the unit will beep and illuminate blink all the indicators After self test the unit will start flashing the power indicator Low Battery Alert The low battery alert will appear for 5sec when the battery voltage level is low This will repeat every 10 minutes until no battery power remains and the radar detector shuts off P LED will blink to alert low battery Other LEDs are all off during alert Note We suggest keeping the power cord readily available If using your radar detector until you recharge the batteries APS Automatic Power Save Basic function If there is not a detected vibration signal for 60sec The sound is muted and LED brightness is reduced to 50 when there is oe a detected radar laser signal at that time Press the APS button repeatedly each time to toggle the APS ON or APS OFF mode The factory default is the APS ON mode The APS ON mode starts with 1 beep and APS OFF mode starts with 2 beeps When the unit operates in the APS ON mode P LED is blinking with green color but If there is not a detected vibration signal for 60sec P LED will be blinking with red color When the unit operates in the APS OFF mo
10. under rainy cloudy weather during nighttime in a parking garage under sunshade etc where there is not enough sunlight Solar cell should be exposed to sunlight over its entire area or it will not provide adequate charging electricity Z Controls Indicators and Connections a APS Button i BAND Button CITY Button a Warning Light 2pcs left and right P Alert LED TX Alert LED ti K Alert LED T Ka Alert LED 1 Laser Alert LED 7 Solar Cell E Volume Controller l 12V DC Power Jack am Power Switch RadarHAWK SM 3 Accessories 12V DC power cable Bracket 2 two suction cups and rubber foot ALL BAND X K Ka ULTRA HIGH PERFORMANCE D RADAR LASER DETECTOR RadarHAWK SM User manual Triangle two sided tape installation Windshield Mounting When you set the unit on the windshield triangle two sided tape becomes unnecessary Keep it in case you change the installation location 1 Make sure the suction cups and your windshield are clean 2 Attach provided rubber foot onto bracket 3 Push the bracket to stick the rubber cups bS 4 4 Attach the bracket to the bracket socket on the bottom side of the detector unit 5 Fix the detector unit onto the windshield Set the radar rear side in the direction of travel Adjust the angle of the unit to keep in the horizontal position If necessary
11. unit can restore the same user settings when it s turned on again They are APS on off mode BAND on off mode City Highway mode Sensitivity adjustment High Middle Low POP on off mode Volume Control Rotate the volume controller at the front anti clockwise to increase the audio level and clockwise to decrease The maximum audio level must be 85 5dB when measured at the distance of 10cm from the buzzer Auto Mute and Auto DIM Control The unit will alert with reduced audio alarms and with reduced LED brightness for continuously detected signals When an alert is constantly reported for a radar laser signal the unit will oe automatically reduce the audio sound level and the LED brightness AUTOMUTE Detected 3 level signal strong signal strength Audio sound level will reduce after 10sec Detected 1 2 level signal low middle signal strength Audio sound level will reduce after 30sec a AUTODIM Detected 3 level signal strong signal strength LED brightness will reduce after 5sec Detected 1 2 level signal low middle signal strength LED brightness will reduce after 10sec Sensitivity Control City Highway mode Press the CITY button repeatedly each time to toggle the CITY or HIGHWAY mode The factory default is the HIGHWAY mode CITY mode starts with 1 beep and the HIGHWAY mode with 2 beeps Mode X Band K Ka Band Highway Full sensitivity Full sensitivity
Download Pdf Manuals
Related Search