Home

User Manual 1

1. E j lt samsung Sumveilance systema m SIGNUP SIGNUP My IPOLIS Signup Sign up 4 4 Welcome to IPOLIS Login We provide real time online video service for IPOLIS products through this web browser ID PW Search We recommend strongly every purchaser of IPOLIS products sign up for IPOLIS online LEGAL NOTICE Legal Notice SAMSUNG CCTV WEBSITE 2 1 DOWNLOAD CENTER NO 2 CR DONS SERVICE E Agree SIGN UP page check ID availability iPOLiS WHAT IS IPOLIS PRODUCT DDNS SERVICE SUPPORT MY IPOLIS SIGNUP SIGNUP My IPOLIS gt Signup Un Welcome to FOR Login lt gt We provide real time online video service for IPOLIS products through this web browser ID PW Search E We recommend strongly every purchaser of IPOLIS products sign up for IPOLIS online Manage your account ID SAMSUNG CCTV WEBSITE CR Create password of 6 to 12 characters in length containing letters amp Z or numbers 0 9 PASSWORD Check gt 7 Check ID availability Windows a DDNS SERVICE NAME le http ipoliscom korizen com etc pop_id_search asp v JOB Choose ID SEARCH E mail ADDHESS POSTAL CODE Check ID availability QSEARCH TEL Check ID availability MOBILE PHONE CLOSE
2. High Resolution image Real time Recording nit Digital Video Recorder SVR 960 User s Manual Thank you for purchasing a Samsung Digital Video Recorder Before attempting to connect or operate this product please read these instructions carefully and save this manual for future use ENGLISH User Manual Introduction Thank you for purchasing the SVR 960 This is a user manual for SVR 960 Before product installation and operation please become thoroughly familiar with this user manual and other manuals referenced by this manual This user manual and the software and hardware described here are protected by the copyright law Therefore with the exception of copying for general use within the copyright law copying and reprinting the user manual either partially or in its entirety or translating it into another language without the consent of Samsung Techwin Inc is prohibited This specification may be changed without prior notice for improvement of product performance Product warranty and limits of responsibility The manufacturer does not assume any other responsibility concerning the sale of this product and does not delegate any right to a third party to take any responsibility on its behalf Product warranty does not cover cases of accidents negligence alteration misuse or abuse In addition no warranty is offered for any attachments or parts not supplied by the manufacturer The warranty period
3. 72 Chapter 7 Web Viewer EE 73 73 1 2 5 74 had Ee eL 75 fe en e EE 15 7 4 1 Screen division amp Image location change 76 7 4 2 MOVING PIA VD ACK uda d Moe 77 7 4 3 using 77 7 4 4 UPPER 77 7 4 5 OPS c pcr 78 7 4 6 WIIGFO DONG USO 78 7 4 7 zi qi cC 78 7 4 8 Image Recording amp Image Storage 79 DET PR 79 FAAO AUdO EE 81 CANN Mage Channel ee EE 81 User Manual MUN 81 7 5 1 screen Division amp Channel Change 82 7 5 2 45168146 82 10 3 zin Mc cT cr rH otis 82 FEA 83 7 9 9 Channel OnO Pc TEE 83 7 5 6 Recording period amp Recording size check 83 EOL a cites est EE 83 7 5 8 Function button at image below uk 84 ME OUI EG tee dl Le 85 Compatible HDD EC EEN 87 Compatible Media 16 22 2 87 SOS CITES ACI BEE 97 Chapter 1 Safety Cautions User Manual 1 1 S
4. ep Check ID availability Q SEARCH Check ID availability LOCATION Determine the location to install the syste CLOSE Desianate the installation location within 1 DESCRIPTION Describe product for management purpose Registration gt Check the registration at product list 61 User Manual 6 Product List My IPOLIS gt Product List Current product list is displayed If wanted product is not in the list click Product Registration at the bottom Location Information Management 1 jusun SVR 1650 121 OFF NT Check ETA 2 korizen SNS 100 EENES ON rs SVR940 DVR TEST ON View Check E Be 4 teajun 11 OFF view Check 5 1292 SNS 400 ais OFF View kis HBS Rs 3 Set up DDNS information SVR 960 can be set up under the network screen in the order as listed in the menu If you press the menu button and select the network you will see the screen as shown in the diagram below In the below screen select DDNS as yes and in the DDNS SERVER DOMAIN NAME enter DDNS server address Default www samsungipolis com ID and PW the same as that created when you registered the product on the iPOLiS homepage Please enter the domain ID and PW Interval Server ID Password Status Not registered MOVE 4 SELECT ENTER When this process is finished the DVR frame section has now completed DDNS set u
5. Monitor amp Spot Monitor The entire function of DVR is available for monitor and spot monitor can use single channel monitor and event pop up Switch to Event Screen sec In case of Event it sets to Pop up relevant screen automatically Pop up duration can set from 2 10 seconds and select among Keep If it sets to Keep it keeps Pop up screen At this time press any channel button to cancel Keep mode If 1CH pops up and 2CH pops up also within pop up holding time screen changes to 4 divisions and show 1 amp 2CH And Hold time is extended automatically by starting from last pop up time z Covert Channel It can hide channel in live mode through Covert Hiding Screen menu If enters to Covert menu all channel list of product is shown and check the channel through pressing Enter button or mouse click Checked channel does not show images from the time set at Live Playback User Sequence It can edit auto Sequence function of User Sequence mode It can set 16 types of Sequence mode and Sequence Time is able to set 1 60 seconds 1 6 Sequences defined at the above example of picture It shows order of CX 4 division screen 1 2 3 4 gt Full screen 1 gt 4 division screen 5 6 7 8 gt Full _ screen 5 gt Full screen 8 gt 9 division screen 1 2 3 4 5 6 7 8 9 51 User Manual Multi Screen Definition It defines 4E 4 channels 9DIV 9 channels
6. 72 It indicates total size recorded to HDD and free size and it indicates starting date amp last date of recording Also it shows indication in percentage about HDD capacity 7 5 7 Calendar Search wants to check the image relevant date amp time 2008 03 03 10 43 44 2008 03 03 10 44 35 When press Go To button it indicates 24hours image recording range from appointed time at left bottom of page It can change the range through 24h button click at above picture 83 User Manual 7 5 8 Function button at image below 9 t C It indicates Playback range of image recorded It can change playback time zone back amp forth click as time as set at 5 It can 1 frame back Play backward Stop Playback 1 frame forth from left button It is function to set Playback speed After button click it can set playback speed relevant to 0 5x 1x 2x 4x 16x 32x 64x All It can setup Playback range After button click it can select playback range relevant to 10min 30min 1hour 3hour 6hour 12hour 24hour It can select whether uses DirectX or not If DirectX mode is checked it playback good quality image based on graphic card and PC performance because it plays back image through Direct Draw It is function to control audio playback and volume 84 User Manual Trouble Shooting 1 No DVR booting Check Power
7. Manage company account 60 User Manual 2 The product registration is possible after sign up Sign in at iPOLiS website WELCOME to IPOLIS ID PASSWORD E MEMBER JOIN ID PW SEARCH Login Signup for POUS online User ID and password don t match OPW 0 Product List If you didn t register products there are no list 6 Product List My IPOLIS gt Product List amp Current product list is displayed H wanted product is not in the list click Product Registration at the bottom Location Infomation Manage ment EINE We Cen 3 o VASO TEST ON EES EES 1 jusun avH 153 121 OFF 2 korizen 55 100 Gee Sp EET ON 4 teajun 11 OFF 5 11254 aNs 4 00 OFF Product Registration Check ID availability Product Registration My IPOLIS gt Product Registration Mandatory Information http www samsungipolis com AVAILABILITY Create ID of 4 to 12 characters in EE You should have exactly same ID with LER sure the correct ID and click the ite TI You may not able to change the initial do ID domain http ipoliscom korizen com myipolis pop_pro_id_se PASSWORD IDSEARCH PASSWORD CHECK CLASSIFICATION Choose C MODEL NUMBER Choose
8. Weekday Start End Among Monday to Sunday it sets Weekday time period The other part unset is under Weekend time period Day Start End It sets Day time period using up down direction key Unset parts means Night time period 6 10 5 Special Time Special Time is able to four setups It can set another specific time period in each time zone Weekday Day Weekday Night Weekend Day Weekend Night For example it can apply various conditions like setup Lunch time or Conference time separately 70 User Manual System Setup Exceptions Days SELECT ENTER EXIT ESC Use when it sets regular exceptional time Exception Days System Setup Start Date amp Time Duration Profile 01 01 12 00 00 00 WDD 01 01 12 00 AM 00 00 WDD 01 01 12 00 AM 00 00 WDD 01 01 12 00 AM 00 00 WDD 01 01 12 00 AM 00 00 WDD 01 01 12 00 AM 00 00 WDD MOVE 4 SELECT ENTER 5 Use when it sets of irregular exceptional time It can set 30 irregular exceptional times and set Start Time Duration Profile Start Date amp Time It indicates stat date amp time of exceptional zone Duration It sets time apply Profile from exceptional time set Profile Profile is to set simultaneous recording with Schedule setup of Schedule Recording and it can set to No Rec WDD WDN WED WEN No Rec No Recording WDD Recording to Weekday Day setup WDN Recording to Weekday
9. Full Time UnCheck All Event Acton Full Time Disable opecial Time Preset Channel Number system Event System Event Sensor1 Not Set UnCheck All Source System Event UnCheck All Method Communication Password Band Width Limit Mbps xDSL xDSL not connected Status DDNS Interval xDSL not connected Off server www samsungipolis com None Password None Status NTP Sync With NTP NTP Mode NTP Server Loc NTP Local Server Not registered Off Client Public 0 0 0 0 21 User Manual Interval 1 Hour Serial Serial Number Com None RS232 9600 Device Interface Baud Rate Parity Bit Stop Bit Data Bit None System Setup System Remote Controller ID DVR ID DVR Alias Playback DVRO Deinterlace Firmware Update Load Save English gt Configuration Default System Log gt V V V V Disk Repeat Record On Mode mm Block Playback No Block Disk Manager gt Disk Status Security User Password ck Password Re Enter ck Admin Password Password ToS Re Enter TNT Enable Enable Remote Setup V V Remote Relay 22 User Manual Time Schedule Weekday Start 221 Mon Weekday End Fri Day Start 09 00 Day End 18 00 Special Time Zone 1 00 00 00 00 Zone 2 00 00 00 00 Zone 3 00 00 00 00 Zone 4 00 00 00 00 Exception Days gt gt Sav
10. Type Channel From Select Disk 1Disk s 7 25 PALOMA Mien FAT32 Format MOVE AY 4 SELECT ENTER EXIT ESC It is to Copy a part of one channel selected to USB memory or HDD Type Channel From Duration Select Disk Start FAT32 Format Select AVI using up down button or mouse wheel Select the channel wants to Copy using up down button or mouse wheel Appoint starting date amp time wants to Copy Move to time year etc using left right button and change Date Time using up down button When using mouse left mouse click to the location wants to change and change it using wheel Appoint Copy time Copy from starting time to time appoints It sets using up down key or mouse wheel Select media want to Copy Select media from Select Disk through Enter button or mouse click It starts COPY It starts using Enter button or mouse click In case of unformatted USB memory or HDD format to FAT32 using Enter button or mouse click and Copy A If copy file doesn t playback in PC Please install a integration code 37 User Manual Chapter 6 Configuration 6 1 Record Setup There are 4 different modes to DVR recording and it can see Setup relation like the following structure of picture It explains Recording type briefly Refer to each item below for the detailed setup relate to Recording Recording Manual Recording Event Recording Schedule Recording Emergency Rec
11. gt Single screen 5 gt Single screen 6 gt 4 division screen 4B 25 User Manual 4 5 Event Screen view In case of Event it can sets relevant screen to Pop up automatically Setup period of relevant Pop up sets relevant time from Switch to Event Screen under Monitor menu When Event occurred at several channel simultaneously division channel as many channels as related appears For example if event occurs to 3 channels together the images appear to 4 division screen automatically Press one of any channel button among pop up image to return to original screen S Screen Setup Monitor Number Switch to Event Sereen Covert Channel User Sequence SEQ Dwell Time Multi Mode VGA Mode SOOxGO00 S6hlz Info Level SELECT ENTER EXIT ESC 1 If it sets Switch to Event Screen to Off Event pop up function does not work A 2 If it sets Switch to Event Screen to Keep it shows screen popped up until 4 6 pressing any button and returns to Previous screen by pressing any button Enlarged Screen view ti i When pressing FUNC at single image full screen mode and select D ZOOM it can view enlarged image by selecting button and Enter button or click left mouse button In case of selecting D ZOOM EN default of enlarged screen location is the center It can move enlarged screen location to 18 steps left right and 12steps upper lower Use direction key to move screen
12. Check Power code 2 No Image on Monitor Check monitor power Check monitor amp cable condition of DVR Check monitor cable port Check whether DVR power is 3 No image of some channel Check Camera power Check Camera image input Check DVR input port Check On Off Activity setup in Screen setup heck Covert setup in Monitor setup 4 No Recording Check whether HDD is installed from Disk Manager Check Record setup 9 No Playback Check Record setup Check button activation 6 Bright or Dark image overly Check Camera setup Separate image cable and close power cable Check Brightness Contrast setup in Screen setup 7 No activation of Remote control Check Remote control battery Check Remote control ID Check specification of Remote control operation 8 No operation of front button Check DVR power Check status of Screen Lock 9 No Networking Check whether network cable is connected properly e Check DVR IP 85 User Manual Check PC IP e Ping Test 10 Case to contact seller In case of following conditions stop using product immediately and const to seller for the service after Power off During using when abnormal work happens to product ex Strange noise smell or smoke In case of damage to connector of power cable In case when rain or water enters to product In case when liquid is splitted or other thing is entered In case when product does not wo
13. When using mouse press menu 24 User Manual button at Function menu Move to Screen Setup from OSD menu to Monitor under Screen Setup and press ENTER button or click left mouse Select SEQ Dwell Time and set wanted value from 1 to 16 seconds When it sets to Off user Sequence view does not operate ALE Screen Setup Monitor Number Switch to Event Screen Covert Channel User Sequence See Dwell Time Multi Mode VGA Mode Info Level SELECT ENTER EXIT ESC User Sequence mode is usable by pressing AUTO button from every division mode Press AUTO button once again to exit from User Sequence mode 4 4 2 User Sequence mode Press AUTO button When using mouse press Auto button from Function menu User Sequence sets the item of User Sequence Conf from Monitor of OSD menu i Screen Setup creen Monitor p V Monitor Seq Channel Seq Channel 1 9 Not Set 16DIV 10 Not Set 4A 11 Not Set 5 12 Not Set 6 13 Not Set 14 Not Set Not Set 15 Not Set Not Set 16 Not Set Cove User On wn MOVE 4 SELECT ENTER EXIT ESC _ 1 User mode can define maximum 16 users m om BE e 2 Above example picture is defined 6 sequences and shows in order to Single a screen 1 gt screen 9DIV 4 division screen 4A
14. channels of Multi Screen in advance The method of Multi Mode is through Enter button after selecting Mode and right window of mode or it can select the channel through Enter button or mouse wheel after window open and the channel select using mouse wheel VGA Mode It can select among 3 resolutions of VGA output 800 x 600 1024 x 768 and 1280 x 1024 Info Level Display information configures what kind of information will be shown to live image and playback image In case of live image user can set view configuration such as time channel event recording status HDD remote control ID and text etc In case of playback image configure time commend channel name event and text 6 9 Event Setup Event Setup includes 7 setups like Event Text D I O Event Action Preset and System Event 6 9 1 Event Sensivity Area CHANGE EXIT ESC Sensor It can set 9 sensors In case of All setup all channels are set to N O N C identically And it can select each channel and set to N O N C Off differently 52 User Manual MD MD detects movement by each channel or all channels and use to inform MD to user Channel It can set channel to All or 1 9CH Sensitivity In case of Sensitivity it can set sensitivity per each channel Off Lowest Low Middle High and Highest Area Area sets detecting area when MD set In case of All set it can select Set All Clear All In case of setup by each
15. Installer It provides auto installation program to use the function of WebViewer at login page It installs ActiveX which is able to use WebViewer function through PC connects at first to WebViewer When install WebViewer Installer it must close all programs relate to CMS Installation may not smooth 7 4 Monitor ma 1 gt e one theres b TE SES P bw ke A SA 1 iA Y 2 Ki Ri dt 2 SE 4 Pu lt gt RES ie Al Fee 57 A TNI LO ec D d C um VA 5 4 1 gt K E ell LN 4 D 7 2 d 2 E Input User Password at Login page and move to Monitor page if it is authorized normally At Monitor page it can monitor real time camera image connected to product or use PTZ camera control Relay and microphone function connected according to user authority 75 User Manual Let s study introduction and functions about each part term of Monitor page 7 4 1 Screen division amp Image location change It shows to 9 divisions 16 divisions or 32 divisions according to channel number of product when connect to Monitor page ESL ES It can change to 1 4 9 divisions by click number of upper page Also it can switch to 1 screen mode by click screen part 1 Os CH 1 Ucten Datacted Amon
16. Reacher Sys ean tw Heri Schedule Fc Re My y Pene wi Comfiquistion Took pdm e Authority Lo Sten Seto HEN Deag wr 1645 DN PTZ A i Tes ei fant Us Le t Price Bes uer Spite Loo tation S eno werd Twesctedde Everi Sote Recker Sten Sow chedi Ent Re ure After the end of account setting set authority of user ID 74 Set Local Account eee we RE S x x Dwy SiS 8 88 NE KKK wis KHL HI uo xi X User Manual Check Hard in user account at authority setup of Configuration Tool to use Playback page Also it checks Check box and apply so that user ID who sets like Microphone PTZ Relay Can use When it shows 1CH image only check the rest channel and uncheck the rest channels amp functions System Setup User Authority Screen Time Date Microphone PTZ Relay HDD CH2 CH3 CHS C Connectivity Device D 5 menn e E 7 3 Usable Browser WebViewer is optimized to Windows Internet Explorer 6 0 or higher For smooth use Windows Internet Explorer 6 0 or higher is installed in PC using Webviewer
17. Relay Output 9 Input 4 Output NO NC D I O software Controlled 12 IO D sub Audio 9Ch Input 4 RCA 5 D sub 1Ch Output TCP IP ARP ICMP DHCP PPPoE UDP SMTP SNMP Protocol FTP SNTP HTTP SNM 128S Supplied Basically Web viewer Monitor Network Software search Playback Backup Event Monitor PTZ Transport Max 120fps opeed Key Buttons Remote Client IR Remote Controllable up to 16 DVRs Keyboard Controller Option SCC 3100A oystem Control Password 2 Level Admin User PTZ Control RS485 RS232C File System Intelligent Power Failure Recovery Operation System Embedded Linux Temperature Storage 20 60 C 30 80 RH Below Humidity x D Weight 7 3Kg Power Consumption AC 100 240V 50 60Hz Max 85W Typical 60W 88 User Manual Dimensions 44 50 88 00 89 SAMSUNG TECHWIN IT SALES NETWORK SAMSUNG TECHWIN C0 LTD 145 3 Sangdaewon dong Jungwon gu Seongnam si Gyeonggi do 462 120 Korea TEL 82 31 740 8151 8158 82 31 740 8145 SAMSUNG OPTO ELECTRONICS UK LTD Samsung House 1000 Hillswood Drive Hillswood Business Park Chertsey Surrey KT16 OPS TEL 44 1932 45 5308 44 1932 45 5325 Wwww samsungtechwin com WwWw samsungcctv com
18. by connecting with the unit Device Set external device connected Interface This menu is to setup using which interface It fixed COM1 COM3 to RS 232C and COM2 COM4 to RS 485 Baud rate Parity Stop bit Data bit Configure the value same as the set value of external unit 6 10 System Setup 65 User Manual 6 10 1 Setup System Setup Remote Controller ID DVR ID DVR Alias Playback Deinterlace Language Firmware Update Load Save Configuration Default System Log MOVE 4 SELECT ENTER 5 Remote Controller ID Max 16 remote controllers ID are selectable and it can control max 16 DVR It can register Remote controller as following order Direct Remote controller to DVR Press ID button that suits to Remote Control ID set f Remote controller ID is identical to DVR ID DVR buzzers After tune ID Remote controller is available to use DVR ID This menu is to set relevant keyboard address when it operates all functions of DVR through keyboard button First set value is set to 1 If it connects several DVR to 1 keyboard and use it can collide with other channel At this time it sets keyboard address to other value DVR Alias This menu is to set DVR name Playback Deinterlace It is On Off Playback Deinterlace It works when Recording resolution sets to Full D1 When it sets to On screen shaking is less in Pause of Full D1 image Language It supp
19. channel it can set to Set All Clear All and Select Area Select Area Select Area is available setup when it sets by channel and it sets detecting parts of movement stressed It sets movement detection area of user There is NTSC in 22x15pcs PAL in 22x18pcs partitions and it can set the area move than 1 piece First setup value comes to Select If it presses Select Area MD area setup window appears 2 2220 A MEI i EH 5 m 7 E AT aS d meno el 4 SIT A CA Com User can setup MD area directly to screen Setup window appears that is divided NTSC into 22x15 partitions and PAL into 22x18 partitions indicates MD setup area in grey color To select Setup area press Enter or mouse click after selecting the area wants through direction key After setup is completed press ESC or right mouse click to return previous menu User Manual 6 9 2 Text Recording Sync Text With Device Delimiter Timeout ms Lines MOVE a 4 SELECT ENTER EXIT ESC Recording It can On Off recording in regard to Text input Sync Test With It selects Text data and synchronizable channel Seek Header Various data types come from external device Access Control POS and ATM etc Like Star Finger 007 it does not need protocol that is register
20. direction and sets to direction when audio is too loud Sync Video Channel It sets whether it can output audio input when which channel selects But this function is applied only when recording Audio output at Live image explains at Audio Mix If it sets 1CH audio to sync with 5CH then 1CH audio input is out when 5CH is selected Default is 1CH audio in and 1Ch out 49 User Manual 6 7 2 Audio Mix Manual Audio Channel Recording Gain Sync Video Channel h1 Record No Video XXI CHANGE A 4 EXIT ESC Select Audio to use from Live image In case of All setup all input audio is out in mixed And when selecting specific audio it is out bony selected channel unconditionally whatever any channel is selected 6 7 3 Record No Video Record Setup Audio Channel Recording Gain Sync Video Channel Audio Mix CHANGE a Y 4 EXIT ESC It sets whether it records the input image that has fault or the channel delete image intentionally or not When it sets to On it records the channel that video does not input also and it does not record the channel video is not input when it sets to Off 6 8 Monitor Setup It sets relevant item in case of image indication on Monitor 50 User Manual 5 Screen Setup Aen Monitor Number Switch to Event Screen Covert Channel User Sequence SEQ Dwell Time Multi Mode VGA Mode BOOxGO0RSG6hlz Info Level SELECT ENTER
21. divisions channel and shows CH1 CH4 it can change the channel to see CH5 CH8 using gt gt button click If press lt lt button it shows previous channel group CH1 CH4 7 5 2 Image Recording 20 PRINT BACKUP While Playback it can record to BMP file Select channel want to record by mouse and click Save button Save image Ext oave Image dialog box comes and it can select input message Name Date Event data Dialog box asks location to save if press OK and it opens dialog box and can save to bmp format file 7 5 3 Print Select the channel wants to print like Image recording and click Print button Memo SVR 1645 Print Test 82 User Manual The window for input Memo appears It can print image through printer connected if press OK Print material includes Printing Date Channel name Recording Date Event Memo 7 5 4 Web Monitor move It can move to Web monitor page by click Monitor button at left top of page 7 5 5 Channel On Off The function is same as channel On Off at Web Monitor It is On Off button positioned on right side of page and it can On or Off by click channel wants Default value is On condition Inactivated Channel button is the case that it does not support at relevant product 7 5 6 Recording period amp Recording size check Capacity 592 00G Free 164 05G From 2008 03 16 19 45 35 To 2008 03 21 00 47 56
22. following item for each explanation of each menu It cannot use NTSC amp PAL cameras to the product together For example if it A connects NTSC cameras to 1CH 5CH it cannot connect PAL cameras to 6CH 8CH Also in case of the change NTSC camera to PAL Camera it must reboot product after connecting camera for normal work Set value is applied to Monitoring and Search identically Screen Setup Activity Color AGC Brightness Contrast PTZ SELECT ENTER EXIT ESC 40 User Manual 6 3 1 Method of Camera Setup It moves to Cam 1 Cam 9 under Camera of Screen Setup using direction key or mouse wheel after pressing MENU button 6 3 1 1 Title Set up Camera Name Relevant character setup menu appears if it press ENTER or mouse click Character input window appears when it inputs characters According to menu Character input window can be different but same setup Character input uses direction button Press relevant character when using mouse Select character wants by pressing up down left right button After selecting input character press Enter Button button to input When delete input character move back using button Press gt for a space between characters 6 3 1 2 Activity It can On or Off camera status It sets up On Off using left right button or mouse wheel after pressing ENTER button To increase frame rate when recordi
23. for this product will be for 2 years from the date of purchase The following cases are not covered by the warranty and payment is required for repairs Malfunction due to negligence in handling by the user Deliberate disassembly and replacement by the user Connection of a power source other than a properly rated power source Malfunction caused by natural disasters fire flood tidal wave etc Replacement of expendable parts HDD FAN etc x Warranty period of HDD and Fan is one year after purchase Warranty only refers to the warranty covering products that have been paid for After expiration of the warranty period 2 years examination and repair will be provided for a fee Even during the warranty period repair and examination of items outside the preceding warranty scope will require a payment User Manual This product is not for exclusive use of crime prevention but for assistance unit such as a fire or theft Therefore we never take any responsibility for the damage from any incident Various experience and technical is needed for installation of this product and individual installation might cause fire electric shock and defect Any installation job should be performed by agency you purchased this product This manual is made by firmware version 1 0 0 basis Content of this manual can differ by Firmware or Software upgrade and standard and appearance of product is changeable partly without prior notic
24. is used to E Mail and input is set like XXXX QUXXXXXX XXX The user does not have to specific mail address and input a checkable mailing address to check if it is sent to specific DVR 56 User Manual Event Action in Special Time lt sets whether it operates Event Action in Special Time or not 6 9 5 Network When DVR connects to network this is menu to setup relevant network data IP addr Net Mask Gateway Additional DNS Port BandWidth Limit Mbps MOVE 4 gt CHANGE EXIT ESC Type It sets up network line type Ethernet XDSL connects to DVR When it is connected Exclusive line or cable model or LAN of DVR it sets to Ethernet When DVR is connected to xDSL in PPPoE method it sets to xDSL But even if xDSL line it sets to Ethernet when it is not PPPoE method DHCP DHCP Dynamic Host Configuration Protocol is to control host address on the network Using such protocol all Host connected to LAN can share authorized IP address that its number has limited when internet connects Namely all Host connects to LAN is assigned authorized IP address from DHCP server temporary If LAN has DHCP server and activates DHCP menu DHCP server assigns authorized IP address to DVR DHCP is used in LAN condition that DHCP server operates Generally it operates DHCP by LAN in case of middle or large size and small size uses NAT Network Address Translation function of HUB 57 Us
25. to the area applies at Time zone setup menu Summer Time zone is programmed to synchronize the same with time zone of existing Microsoft Windows Here sets top whether it sets relevant summer time to product installed in Summer time application area eR Refer to NTP of Network Setup for the detailed explanation relate to NTP Date Format oet the method of Time indication Setup the indication wants among MM DD YYYY YYYY MM DD DD MM YYY Y using direction key or mouse wheel Date Time It moves to Year Month Date and Time in order through left right direction key And each menu setup is available using up down key or mouse wheel 39 User Manual Apply Date Time To apply Date Time set value must press Apply Date Time button It indicates dialog box as follows by pressing business WARNING Change DVR time cause playback time corruption Are you sure YES NO Except Date Time setup other setups are saved automatically when it is AN closed completely but Date Time setup does not saved automatically because it can affect to HDD recording file system critically When it applies the content changed it must press Apply Date Time button to apply 6 3 Camera Setup This menu is to setup the condition for each camera connects to the product It can set Name Status Color BW Auto control Brightness Contrast PTZ part setup of cameras connect through Camera setup menu Refer to
26. 0 Application or SPOT te EE 29 Chapter 5 Playback eelere ee ee 30 51 eel uua caseo 30 5 121 Basic Screen Playback 9 division screen 30 54 2 NMarnous rayDack TUNCIIONS esset esc aede ae vet sext aee E 30 o2 SEARCH MOC sick rond ot E ie e eM 31 5 2 1 31 5 2 2 Calendar SC ANG EE 32 5 2 3 TEES 32 5 2 4 hein ei EE reg UR 33 99 COV M eerste AE 34 5 9 1 CD DYD iicet ba etc d ML are a 34 5 3 2 REA X P 35 E EP lr 37 Chapter 6 Contlguralloniscssi iiie eine 38 Go LRECO SC 38 6 2 Time Setup System 38 6 2 1 Method of Time SOLU DS iet mde used du ade e eee ee i 39 6 5 SOLU oe UR 40 6 3 1 Method of Camera SOLU opt 41 6 4 Quick Record Setup Quick 42 6 4 1 Method of Quick Record Setup EE 43 EE Ee IRECORGING Tm rebates stale 43 6 5 1 PAU OUD aad aioe th ade od uds 43 6 5 2 Setup DY M T 44 En
27. 6 4 Quick Record Setup Quick Setup Quick Setup is to setup recording simply in same condition of all analog channels Quick Setup Schedule Recording Speed Quality Resolution System Time Language 4 SELECT ENTER EXIT ESC 42 User Manual 6 4 1 Method of Quick Record Setup Select Quick Setup Recording Speed Quality There are all 5 setup conditions Default set value is No Rec that means does not record No Rec Low Standard High Custom Except Custom setup condition sets to synchronies Speed fps Quality Resolution automatically Resolution There are total 3 conditions CIF HALF D1 Resolution setup is changeable when Recording Speed Quality is set to Custom Method of Record check L aN If Record Setup is completed normally REC LED at front part blinks Reference It indicates Recording relevant channel presently to R by channel 6 5 Schedule Recording This menu can setup Record by channel or all and can setup recording condition by time schedule After user sets Quick Setup this menu changes existing setup value to new setup value 6 5 1 All Setup It is similar to recording setup of Quick Setup and set all analog channels in same condition It sets channel to All and sets Macro among Low Standard and High after setup schedule to Full time 43 User Manual Record Set
28. DNS server Password Input Password registered when joins to DDNS server Status It indicates registry status of DVR Not Registered indicates unregister and it indicates registry if it indicates Date Time amp OK 6 9 8 NTP NTP Network Time Protocol is synchronizing the time between devices connected to network It consists of that Server provides standard time on network and synchronizing Client by connecting to this server and receiving the time gt Communication Sync with NTP NTP Mode NTP Server Loc Ni Local Server Interval CHANGE av 5 Sync With NTP It cans NTP function On Off NTP Mode It sets whether it operates NTP mode of DVR to Client Server or Both NTP Server Loc When NTP Mode is set to Client it is enabling It sets whether NTP server is on Local Network or internet Public NTP Local Server IP When it sets NTP Server Loc to Local it is Enabling and sets IP in server Input IP of DVR that sets IP in NTP server or NTP Mode to Server at local network 64 User Manual Interval min oet the period of time to synchronize AN When NTP Mode is Client Sync with NTP must be set to On 6 9 9 Serial DVR is usable total 4 Serial port 2 RS 232C and 2 RS 485 ports F g r Communication Serial Number Device Baud Rate Parity Bit Stop Bit Data Bit SELECT ENTER EXIT ESC Serial port Select the port to control
29. Ee ee e EE 45 6 6 1 Event Source Ee e 45 6 02 AI Event Record ecd muted 47 6 6 3 Manual Recording Setup 48 6 7 Audio Other Setup Audio 49 IN To SOU esc RT 49 Or ZAAO dte out mec E NM E 50 elle NO sateces TNNT o0 User Manual VION MLO SEUD EE 50 0 9 Sell 52 Mp SIAN i e D DOR 52 9 9 2 54 55 OIA Vent Le R 56 EE 57 58 o9 EE 59 6 9 9 NTP be e nnn en Nn ar ter ee eee Lo 64 0 9 9 addi o dum VE til I end t obe Ld cien bu DET 65 System Se 65 a E Ee Oe cane 66 DIS KU Eo saps Doer pu E dons ise Gud 67 610 9 RES 69 6 104 zer ndo Sea Ea det PV S 70 6 10 9 Special TIN aires ee 70 m re erm tr
30. Night setup WED Recording to Weekend Day setup WEN Recording to Weekend Night setup 71 User Manual 6 11 Exit Exit menu is to exit without recording or recording Menu setup we Save Do not save SELECT ENTER EXIT ESC Save This is menu to save the state of setup at other menu and exit to live screen it can select into oet or No Set Select Yes when it saves the setting and exit or select No when it does not save setting and exit Do not Save This menu is to exit without saving the status of setting at other setup Are you sure SELECT ENTER EXIT ESC 72 User Manual Chapter 7 Web Viewer WebViewer is web program loaded into product that can view image recorded or monitoring image of product in real time through web browser in PC remotely able to use Internet otructure of Web Viewer is divided into Monitor which can monitor image in real time with Login page and Playback which can playback recorded image 7 1 LOGIN twork Product Administrador USER ID PASSWORD If user inputs IP address and Port on browser address box User can access to Webviewer Login page for example type http 192 168 1 100 4000 If default value of the port is not 4000 but another value input the changed port value in port input box It can connect to WebViewer Login page if it input IP address set to product in Web browser window Enter user ID amp Password set in SNM 128S a
31. Record setup 352x240 base till max 270 frame per a second Manuel amp schedule recording function Video Loss detection function Record Event Sensor D I O Video loss Motion detection Text list Max 5 seconds video recording function at pre event per each channel Search Playback It supports various convenient functions to search and playback Playback by Time Date Channel Increase convenient Search using mouse Forward Backward Search of Pause screen Playback by Event Sensor Video loss Motion detectin Text list Ease Search using Remote control Digital Zoom Playback screen Digital Zoom Recording Device It provides built in HDD basically and DVD R CD R USB memory can be used for recording according to users Ze Ze Basic supply item Built in Hard disk Various Copy device support DVD R CD R USB memory 12 User Manual Ze Refer to the appendix on the back of the manual regarding the type of compatible media Hard disk expansion device External recording device SVS 5E Option as exclusive device Network It supports various networks like LAN xDSL and can operate and manage main functions of product through exclusive PC viewer remotely Transmission E mail through TCP IP DHCP when event occured Live video monitoring remotely Selectable whole or 4 divisions screen PC Playback Recording Search amp DVR control functions through network vie
32. S Playback program Mini Player program 7 4 8 2 Save Image Image recording can be saved into 3 types of jpg bmp eye and Saving means the function to save image of channel monitoring at present into 1 Frame Select the channel to save image and click right mouse Select Save As among right mouse menu and appoint saving location and save by pressing Save button It can check by opening directory saved and double click the saved image to check saved image 7 4 9 PTZ Use Among the image monitoring it can cancel PTZ if it selects the channel set PTZ and press right mouse button PTZ Control can use Pan Tilt Zoom Focus functions 79 User Manual Pan Tilt Control Click right mouse at the image wants to control PTZ and select PTZ menu It shows cross line at center of image and Pan Tilt works when mouse click the image If click left right direction from the center PAN controls and Tilt controls by click to up down direction Far from the center Pan Tilt works faster Zoom Focus Control If it move mouse to left right edges it shows slide bar for Zoom Focus A unit that is possible to Area Zoom has Zoom Zero work button Using left side slide bar of image can Zoom In Out and left side slide bar can control Focus Preset Move When Preset is set it selects Preset works Go to Preset pressing right mouse button at PTZ control condition It moves to preset position selected User should set Preset in
33. Select button and press Enter button or press left mouse button to return original screen 26 User Manual 4 7 Pause Live screen Pause live screen like PlayBack Press PAUSE for Pause live screen and press PAUSE button again to return to live screen 4 8 PTZ Control It connects PTZ controller to DVR and it can control PTZ while viewing image in real time if it sets relevant protocol to Serial Setup menu To execute PTZ press PTZ button from front function button and select PTZ function through Func button Move to the channel wants to control Press PTZ button 4 or click PTZ button from Function menu using mouse PTZ menu Pan Tilt Zoom Focus Load Preset Save Preset appears After selecting wanted menu among them click ENTER using mouse 4 8 1 Pan Tilt Control This menu is used when it utilize Pan amp Tilt from real time monitoring mode Select Pan Tilt from PTZ mode It can utilize Pan using left right direction key at front part and click left right on screen Tilt using Up down direction key or click up down on screen 4 8 2 Zoom Focus Control This menu used to utilize Zoom amp Focus functions from real time monitoring mode Select Zoom Focus from PTZ mode It utilizes for Zoom amp Focus functions through direction key at front part or mouse wheel 4 8 3 Load Preset application This menu is used when it moves to Preset location from real time mon
34. advance Auxiliary operation When Preset is set Auxiliary at Pop up menu is indicated additionally And it executes relevant action if it selects relevant menu registered Bea en Refer to PTZ Setup for PTZ setup method amp PTZ camera list available Reference 80 User Manual 7 4 10 Audio Use When synchronized audio and channel is set it can execute audio listening by click Listen menu of pop up menu that comes through right mouse click on the image And audio listening is possible through Uncheck of Mute 7 4 11 Image Channel Close Channel It can cancel connection of image monitoring by click left side channel button of image And Screen comes to black To reconnect the channel disconnected clicks channel button that is turned Off to reconnect relevant channel 7 5 Playback This page is to playback the image recorded and user who has offered HDD authority at administrator account or use account can use this 81 User Manual Playback consists of 9 division screen can playback using Search through calendar by recording period or Move period button It can Copy recorded image and Print Pause image or can save to bmp file Let s study about introduction amp function and naming of each part 7 5 1 Screen Division amp Channel Change EHE ES Playback supports 1 4 9 division screen Using the menu as about picture can select division screen If user forms to 4
35. again by pressing PLAY button 1 2 REWIND Play forward in 1 2 speed by pressing Ge button at Function menu 1 2 FORWARD Play reverse in 1 2 speed by pressing EN button at Function menu 5 2 SEARCH mode This is menu to playback data in specific time through searching Time or Log There are Time Calendar Event and Thumbnail in Search mode Press Search button in Front part or click Le button in Function menu to enter into Search mode Calendar Event Thumbnail 5 2 1 Time Search Input Data amp Time to search and playback image moves to searched date amp time by selecting Search Start REC Time 04 40 2008 12 00 00 End REC Time 0440 2008 12 10 00 Search Time 04 10 2008 Search 31 User Manual Start REC Time It indicates Date amp Time starts recording first End REC Time It indicates Date amp Time of recording the most recent Search Time Select Date amp Time wants to search from starting time to present time of Recording Search Button Search the image of time input 5 2 2 Calendar Search It can use more easily search the wanted point using calendar 0 3 6 9 12 15 18 21 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 Year It selects the year to search It can change the year using wheel of mouse Month It can select the month to search and change the month using wheel of mouse Selecting Date Press Enter button by moving to the dat
36. ation may occur Inquire at the point of purchase of the product before installing such a hard disk drive Product warranty will not cover deliberate additional use of such hard disk drives This product is a supplementary rather than primary means for preventing fire and theft Our company is not responsible for incidence of incident or damage that may Occur FCC Compliance Statement NOTE This equipment has been tested and found to comply with the limits for a Class A digital device pursuant to part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instruction manual may cause User Manual Correct Disposal of This Product Waste Electrical amp Electronic Equipment Applicable in the European Union and other European countries wi th separate collection systems This marking shown on the product or its literature indicates that it should not be disposed with other household wastes at the end of its working life To prevent possible harm to the environment or human health from uncontrolled waste disposal please separate this from other types of wastes and recyc le it responsibly to promote the sustainable reuse of material resour ces Household users should contact either the reta
37. automatically Warning Level It checks all disk size used that is connected or attached to DVR and inform if it records until the Capacity setup Block Playback This menu is to make visible limitedly the recorded image in HDD as much as the date set If it records for 30days and sets Block Playback to 2days it can play the day before including 30days among 30days It can set from 1day till 31days Disk Manager Disk Manager is to manage internal or external HDD using It manages the state indication of HDD Bad Block Size Add Remove etc Disk Status It can view HDD temperature state of HDD installed in System 6 System Setup Type Model Bad BIk Size MB Enabled WDCWD3200AV 0 305245 Luiz ATA WDCWD3200AV 305245 Yes TSSTcorp CDDVDWS AUTO NO MOVE gt SELECT ENTER EXIT ESC SELECT ENTER EXIT ESC Type It indicates location of disk Int A Internal A HDD Int B Internal B HDD Ext External HDD Model It show model name of HDD Bad Block It indicates Bad Block HDD When no problem it indicate 0 In case when HDD is not Enabling it does not indicate Bad Block 68 User Manual Size MB It indicates HDD size into MB unit Enabled It changes the state of HDD to Use or disuse Yes Use No Disuse In case of the change to HDD YES f press Enter or roll mouse wheel at Enabled No condition NOTICE window pops up and shows next message This disk ca
38. ck recording image SA wee in 9 divisions 5 1 2 Various Playback functions PLAY Playback 1 speed When using mouse click Play button from Function menu It playback multi image always through pressing PLAY button from monitor mode Also when Playback by pressing PLAY button it playback recording image from the time user played recently PAUSE It pause Playback When using mouse press Pause button from Function button STOP Stop Playback When using mouse press Stop button from Function button FWD Whenever pressing button playback speed is changed x2 x4 x8 x16 x32 x64 x2 x4 sequentially At Live press FWD button to Play recorded images in a minute ago from present live time It changes Play speed Function through E button REW It changes Playback speed in reverse whenever pressing a button X2 x4 x8 x16 x32 x64 x2 x4 sequentially 30 User Manual At Live screen it Reverse Play recording image from the time of last recorded area by pressing REW button It also changes the speed by pressing lt lt at Function menu STEP FORWARD While Play it plays forward by a frame of image if it press FWD button at the stage of pressing Pause button It returns to normal Playback again by pressing PLAY button STEP REWIND While Play it play in reverse by a frame if it press REW button at the stage of pressing Pause button It returns to normal Playback
39. ction 6 9 7 DDNS It DVR is connected to cable model or xDSL modem IP address is changed whenever it tries to connect to ISP In this case user cannot find IP address changed If DVR that uses fixed IP is registered to DDNS it can find IP address changed easily when it is connecting to DVR In order to register dynamic IP address in DDNS please refer to the below explanation DDNS Registration DDNS Registration procedure 1 Sign up at IPOLIS website The website is www samsungipolis com 59 User Manual HOME SITEMAP KOREAN ENGLISH sawsuNGTECHWIN WHATISIPOLIS PRODUCT DDNS SERVICE SUPPORT MY IPOLIS iPOLIS Samsung Network Surveillance System SNP 1000 SNM 64S P SNP 3300 SNP 1000 Stylish 10X PTZ Network Camera 10X A F Optical Zoom Max 100X Min illumination 0 005 Lux Day amp Night MPEG 4 JPEG VGA 30fps Bi directional audio Remote PTZ Control SAMSUNG CCTV SYSTEM The frontier in digital image security DOWNLOAD CENTER We will provide you with information about the products available SERVICE One click remotecall Service PRIVACY LEGAL NOTICE CONTACT US 5 2 Quick Linki e L milestone COPYRIGHT 1936 2007 SAMSUNG LTD Manufacturer Alliance Partner Agreement the general terms and conditions HOME LOGIN SIGNUP SITEMAP W I iPOLiS WHAT IS IPOLIS PRODUCT DDNS SERVICE SUPPORT MY IPOLIS
40. d digital product focus on users these provide various functions such as Record Playback Copy functions simultaneously Movement Detection PTZ Pan Tilt Zoom control function Password setup real time Audio data recording maximum 10 000 event lists amp log file saving etc 2 1 Features Monitoring Screen It supports high quality live images and various monitoring screens Real time MPEG 4 images 270 frames Various surveillance screen mode Single 4 9divisions User Sequence AUTO Support various monitor output 2 Composite including 1 Spot 1 Pan Tilt Digital Zoom PIP Picture view inside Picture Audio Recording This supports real time audio input and recording function Simultaneous recording of 9 channels audio input in real time Input 9channels 4 RCA in rear 5 D SUB Output 1 in rear Recording and Playback simutaneously Video Recording It can record image high quality MPEG 4 real time image into max 270 frames per second 11 User Manual and max 5 seconds at pre event Also it protects privacy through COVERT Hiding image function High quality MPEG 4 realtime image recording 4 steps recording resolution setup for the control of recording capacity Multi recording function for manual event amp schedule event Sumultaneous operation for Recording Playback Copy Network Each setup for each channel recording resolution amp motion detection range
41. e gt gt Chapter 4 Monitoring If power on to DVR only analog image of all channels connected to monitor mode appear on screen This is to utilize all monitoring mode of DVR 23 User Manual 4 1 Basic Screen view f Power connects DVR is on automatically All LED is On Off in order and is booting After booting basic 9 divisions monitor screen appears x f user s password is set password input window appears 4 2 Single image view in full screen 2 KMA Press channel button wants to see or click left mouse Press MULTI button or click left mouse once again to move to division screen again 4 3 Multi Screen view To see several channels simultaneously it press MULTI button or click division mode wants to see by executing Display menu among Function menu t changes to 4A 4B 4C AE 9DIV division screen modes whenever pressing MULTI button 4 4 User Sequence view User Sequence mode is set by pressing AUTO button at front after setup from 1 to 9 from User Sequence setup or set up channels wants to see partly or click Auto menu of Function menu It stops by pressing AUTO or click Auto menu of Function menu again When User Sequence is not set pressing AUTO button does not operate Sequence 4 4 1 Basic System mode fituses AUTO it can setup sequence channels to view automatically Press MENU button el to set up sequence period
42. e for searching through the calendar When using mouse it can select date and search time base using wheel Selecting Time Among the time period that image recorded it starts Play through Enter button after selecting the time period wants 5 2 3 Event Search It can appoint specific period and divide to all channels some channels All MD Sensor to search When using button at front it can change Date Time using up down button And when using mouse it can set the part wants to change through rolling wheel Selected result is shown to Event Search window in separate list It can playback relevant date Time by pressing Enter button after selecting searched list or rolling wheel 32 User Manual Start REC Time 03 45 2008 01 20 22 End REC Time 03 45 2008 12 21 43 Search Start Time Search End vime Event Channel Event Type Search Start REC Time It indicates Date amp Time starts recording first End REC Time It indicates Date Time of recording the most recent Search Input starting date amp time to search Move the parts to setup using Start Time direction button and press Enter to change the value When using mouse click the part to change and change the value using the wheel Search End Time Input ending date time to search Move the parts to setup using direction button and press Enter to change the value using up down button When using mouse click the part wants to change and change the value
43. e to users User Manual Contents Chapter 1 Safety Cautions 1 1 Symbols displayed for each Chapter 2 SUMMANY EE Repas EE Chapter 3 Product Description 3 1 e qot fumes 22 gg EE SS WEE RE Edge 24 FUNCION MENU Ee ee 3 5 Factory default entis Rien n Lena bee n ee Chapter 4 4 1 Basic Screen nien rupe aps e To sep 4 2 Single image view in full zs Musee MIR Tm T T 4 4 User Sequence 4 4 1 Basic System MOG o et o o a redde ee te de 4 4 2 User Sequence mode AsO Event 9creert VIO W a uoc iow 4 6 Enlarged Screen 4 Pause LiVe LN MEN EE 4 8 1 mE Um 40 2 ZOOM FOCUS a tein Devan 4 8 3 Load Preset application soe 4 8 4 Save Preset application 4085 EE 4 8 6 Auxiliary Off application 4 9 Screen Lock User Manual 4 1
44. e way to execute copy menu is to push the copy button on the front and click Ki menu 5 3 1 CD DVD Copy Type Channel Select Disk CDIDVD TSSTcorp GDDYD FAT32 Format MOVE 4 gt SELECT ENTER Using CD amp DVD it detect CD amp DVD for Copy and calculation Copy capacity automatically Type Channel From To Selecting Disk Select DVD using up down key or mouse wheel After pressing Enter it can change using up down key or mouse wheel Among 9 channels it can select a part or all channels Select the location of Channel and select it using Enter button or mouse wheel It appoints starting date amp time wants to It can set up using up down button at front or mouse wheel It appoints the last date amp time wants to Copy It can set up using up down button at front or mouse wheel Select media wants to Copy Press Enter at Select Disk part and 34 User Manual select disk Start Start COPY Press Start button through Enter button or click left mouse button FAT 32 Format Format USB disk or HDD to FAT32 When DVD Copy it does not use When using media it executes format first to use by selecting FAT32 Format button and press Enter button or left mouse click Media available when using CD DVD copy is as below Imation Exhortation 16X Imation Exhortation 16X Sony Exhortation 16X Sony Exhortation 16X Mitsubishi Exhortation 16X Mitsubi
45. eased to operate any function button Whatever any button is pressed at Lock mode it loads window asking User Password And Load mode is released through input of relevant Password 28 User Manual 4 10 Application of SPOT monitor aE Screen Setup Monitor Number Switch to Event Screen Covert Channel User Sequence SEQ Dwell Time SELECT ENTER EXIT ESC Basic monitor can set to monitor multi channel images amp menu setup and Spot monitor can monitor single channel image to big screen Basic monitor is used for all functions of DVR like Menu setup Live images 9 divisions and Playback and Spot monitor can be used for two functions of Single channel live image and Event pop up image 29 User Manual Chapter 5 Playback 5 1 Various Playback mode 5 1 1 Basic Screen Playback 9 division screen Press PLAY button from monitoring mode or click Play button from Function menu using mouse f it press PLAY gt button FWD button for changing speed it playback image forwarding in 1x speed set first If it presses REW to change speed it plays rewinding a speed set first When doing playback by 9 chs possible playback Frame per second is 2 fps N displays only Frame Therefore total Frame per second for 9 chs to playback is 18 fps and for 1 ch 30 fps as many as its max recording performance 4 2 Press Playback button from Monitor division mode to play ba
46. ed already If not it requires parameter to grasp the structure of the data from Text data input continuously Namely all data has the start and the end Header means the data is inserted always to inform the start Hence DVR discover the character defined to Header s data and it can find out the start of a data And the reason of setup 2 Header is to detect these because a device can send various information externally Delimiter Because Delimiter s value can be different with each device wants refer to relevant manual or contact seller and then input the value Time Out ms The number of line defined below means the text line number that is maximum usable line of a line In case of regulated data there can be long or short information For example it has 3 lines to assign customer s name from ATM and some register First Name amp Last Name only These need a line less than others But because DVR cannot detect this automatically it is considered to last line after some time from registered time of last line and it decides whether it records a registered data as complete 54 User Manual data Lines It defines a data consists of how many line i In case of External device it must consult with seller before installation because it may be not recognized according to feature 6 9 3 D I O gt Event Setup Select D O Output Type SELECT ENTER EXIT ESC D I O is Port able to use digital Input a
47. el button Select Channel at Live image and Playback image Function buttons Classification Function 8 MULTI Change DIVISION from live amp playback mode 9 AUTO It works and stops user sequence 10 PTZ otarts or ends PTZ function 11 MONITOR Select basic monitor amp spot monitor 12 MENU Enter into Menu 13 SEARCH Enter into Search mode 14 COPY Enter into Copy mode 15 FUNC Enter into Function mode ESC button Classification Function 16 ESC button Use this when it step out from Menu or close pop up window Playback amp Setup part Classification Function 17 PLAY ENTER Enter into Playback mode or select Menu 18 REW It moves amp selects from menu or changes rewinding 15 User Manual playback speed from Playback mode 19 FWD Move or select this from menu or change forwarding playback speed from Playback mode 20 A PAUSE Move and select from menu or Pause live image or playback image 21 V STOP Stop Playback in Playback mode 3 2 Rear Part oo 16 11 17 e o Input Output terminal Function 1 socket for AC100V AC240V power code 2 Ground terminal between DVR and external device 3 Connection terminal for BNC input of camera 4 Connection terminal for BNC output Loop of camera 5 BNC connection terminal for Monitor output 6 BNC connection terminal for Spot monitor out 7 RCA connection terminal for Audio input 8 Speaker output terminal 9 Network connectio
48. er Manual IP Addr IP Address is used when communicating DVR amp CMS and is used to connect from Webviewer to DVR But it is available when Net Mask and Gateway are set Net Mask Net Mask assigns the range able to input IP Address and same range of IP make possible to communicate Net Mask receives from network administrator and use Gateway Gateway must input so that IP Address communicate and it receives from network administrator and input DNS1 DNS1 must be input when it registers DVR to SWR and use DNS Address requests to network user and input Additional DNS Additional DNS input to replace when DNS1 is unstable or has the trouble Port Port is used when it register to SWR or connect through CMS or Webviewer The basic port is 4000 Watch out of port input when you use PPPoE modem and IP sharing device Band Width Limit Mbps Maximum transmission speed to output data from DVR namely it sets capability for transmitting data It has no problem to use without additional setup and it recommends administrator sets 6 9 6 xDSL In case when DVR is connected to xDSL line and use PPPoE it must set user ID amp Password ID amp Password uses the data given when join to xDSL 58 User Manual User ID Password Status XDSL not connected SELECT ENTER 5 User ID Password If DVR is connected to xDSL it must set ID amp Password Status It indicates the condition of DVR conne
49. evice Seek Header Delimiter Timeout ms Lines MOVE 4 SELECT ENTER 5 Recording It can On Off recording of Text input 46 User Manual 6 6 2 All Event Record Setup This is setup all analog channels in identical condition Channel Number Type Macro Speed Quality Resolution Pre Event Post Event CHANGE 4 5 Sensor MD Text It sets whether it synchronize with Sensor MD Text event Pairing means synchronizing 1 1 between channel and Sensor MD 6 6 2 1 Setup by Channel Record Setup Motion SELECT ENTER EXIT ESC Event Source Through Event Source can select 9 Sensors 1 MD and a Text input Selecting Sensor selects box of relevant number Selecting MD Text selects box when it needs to use Macro 47 User Manual There are total 5 setup conditions No Rec Low Standard High Custom In the condition except Custom Speed and Quality are synchronized automatically Pre Event sec It can set max 5 seconds Post Event sec It can set max 60 seconds 6 6 3 Manual Recording Setup When user presses REC button at front part this menu can setup recording condition of image If manual recording starts existing recording setup set is ignored and it records image in the value set from Recording Setup gt gt Manual It records to the value sec set in Pre Event amp Post Event of Manual
50. g Playback image double click after load mouse to the channel going to convert to any 1 channel temporary 200606 1 06 1066 t On Chi hitas Detected 4 8 On Detectet 2006 06 1408 1852 amp tn men Devoted Switch to 1 screen and double click screen again to return to previous division screen It can change image location at division screen To move CH3 image to Ch6 image location drag amp drop Ch3 image to CH6 location to change 76 User Manual location using mouse 7 4 2 Moving Playback If it clicks following picture in top page it moves to Playback page 7 4 3 Channel On Off Channel Channel On Off button is located on left page It can On or Off by click the channel wants and default is On Channel Above picture is Off state about 9 16CH When Channel is Off it changes to grey color and image is not visible and is changed to black Inactivated channel button is the case that it does not support at relevant product 7 4 4 Sensor indication This is icon indicates sensor activated of product Sensor If sensor activates relevant sensor is changed to Red and sensor number is indicated on the image It maintains in Blue when sensor inactivates 2008 15 25 49 31211 Inactivated sensor icon is the case that it does not support at relevant product 21 User Manual 7 4 5 Relay operation It can Relay On or Off of product If it clicks the nu
51. iler where they purchased this produ ct or their local government office for details of where and how they can take this ite m for environmentally safe recycling Business users should contact their supplier and c heck the terms and conditions of the purchase contract This product should not be mix ed with other commercial wastes for disposal Samsung Techwin cares for the environment at all product manufacturing stages to preserve the environment and is taking a number of steps to provide customers with more environment friendly products The Eco mark represents Samsung Techwin s will to create environment friendly products and indicates that RoHS compliant the product satisfies the EU RoHS Directive Chapter 2 Summary 10 User Manual This unit is digital recording device that record the digitalized image input from 9channels to built in hard disk and can playback When it set functions it can easily setup through operating mouse amp button at front Samsung SVR 960 are digital image recording devices used to Bank Apartment Public offices and are the independent product that system performance amp safety are ensured Because it saves to Hard disk instead of video tape it can save high quality image when recording repeatedly And it is useful for data searching because it can save and playback image data to digital file format Also as high quality image in real time large Capacity recording device an
52. itoring mode Select Preset number using up down button or mouse wheel f Preset is set select Load and press Enter button or click mouse 4 8 4 Save Preset application This menu used when it sets Preset location from real time monitoring mode 27 User Manual Control camera location using Pan Tilt and Zoom Focus menu Select Preset number using up down button or mouse wheel f Preset is set select Save and press Enter button or mouse click 4 8 5 Auxiliary On application This menu used when it uses special function of PTZ device from real time monitoring mode Set Aux number using up down direction key or mouse wheel Select On and press Enter button or mouse click Total 16 Aux functions are available 4 8 6 Auxiliary Off application Set Aux number using up down direction key or mouse wheel Select Off and press Enter button or mouse click This menu used when it stops working special function of PTZ device 4 9 Screen Lock Control This function is to prevent control or setup from any user who has no right To use this function it needs to set User Password first It needs to set Admin Password to set User Password If it press ESC button more than 3 seconds Screen Locked message is loaded at lower screen and Lock mode works When User Password sets to Off Enable user password first message is loaded on screen In case of Lock mode any button does not work And it must be rel
53. mber of button Relay is On and icon change from Blue to Orange color aM em 2 3 m Inactivated sensor icon is the case that it does not support at relevant product Reply work needs user s authority Refer to user guide in Product for User Authority Setup 7 4 6 Microphone use Mic 1 It can microphone On or Off and Default is Off In case of click button projecting button changes to Blue and microphone is available Mic Inactivated Mic button is the case that it does not support at relevant product 7 4 7 Event Data It shows Event data happens in real time at bottom of monitoring page Indicated lists to Event data are as follows Table Event Icon Button Function 15 Motion Detect On Sa Sa Sensor Input S Relay Output On T T No Video Video Detected ia Text Input User Login 78 User Manual 7 4 8 Image Recording amp Image Storage 7 4 8 1 Image Recording After selecting channel wants to recording from image monitoring it selects Rec Start pressing right mouse button It can record image max 10 minutes It indicates recording time on the image executing Quick Recording Among image recording if it closes recording by click Rec Stop of right mouse again and open dialog box to record file recording user saves to temporary directory with naming to the file Recorded file is saved to re4 file and re4 file is able to playback through CM
54. menu Pre Event means the time records before user press Rec button and Post Event means the time record after user press Rec button Channel Number Speed Quality m gt 6 4 S OSG LY an Pre Event m P Que Post Event pr ES CHANGE A 4 EXIT ESC Manual Recrding Button Recordinging Camera Num It can select recording channels with relevant setup and All amp each channel selection are possible Recording Speed Quality There are total 5 setup conditions No Rec Low Standard High Custom In the condition except Custom Speed fps and Quality are synchronized automatically 48 User Manual Pre Event sec It means the time records before user press REC button It can set max 5 seconds Post Event sec It means the time record after user press Rec button It can set max 60 seconds 6 7 Audio amp Other Setup Audio Recording Through this menu can set recording of Audio setup amp No Video Manual Audio Channel Recording Gain Sync Video Channel Record No Video CHANGE A v 4 gt EXIT ESC 6 7 1 Audio Setup It can set Audio channel Recording Gain and Sync Audio Channel Select channel wants to use Audio Recording It sets whether it records audio using In case of Off set audio outputs to live image only and Playback also when it sets to On Gain When Audio sounds too low it sets Gain to
55. mp Output simultaneously It has 12 Digital Input amp Output D I O Channel amp Input Output It can set 12channels to Input Output When Input sets it starts Emergency Recording if the signal in from any one of channel When Output set it works if Sensor input For urgent recording please select one between 1 and 12 of D I O in Digital configuration by input and set input type to Urgent and then make its D I O on At the same time recording macro uses the macro set in Event Recording Its Recording time is same as the value set in Recording after Event 55 User Manual 6 9 4 Event Action Select Action Action Duration Action Source Event Action Special Time Full Time CHANGE Y 4 EXIT ESC Event Action sets workable Action according to Event Input Select Action Select Action can select R1 4 Buzzer E Mail Action Duration Action Duration operates when Relay works and keeps as long as the time set and also Buzzer keeps in same way It works E Mail Sending in an interval of time set Action Source Action Source can setup Sensor Motion and Text separately Also all event input can setup simultaneously E Mail Address E Mail Address sets when Select Action is used to E Mail E Mail Address input E Mail Address of receiver for message Input is in type of But English and figure are only available Sender Address sender Address set when Select Action
56. n be added without format Nevertheless do you want format this disk f select Yes it maintains previous data as it is and Enable to use HDD f select No it deletes previous data and Enable to use HDD In case of the change of HDD No It pops up NOTICE window and shows next message using Enter button or rolling mouse wheel at the condition of Enabled Yes Disk will be removed select Yes Recordinging disk removed is appeared and changed to Enabled No HDD is not used If select No at Disk will be removed it keeps previous HDD state as it is 6 10 3 Security It limits the range able to use by classifying DVR user to Admin amp User In case of Admin they can use all functions of DVR including Setup amp Change In case of they cannot access to Setup menu but only Playback ni System Setup User Password Password Re Enter Aelia t Re Enter Remote Setup Remote Relay CHANGE av 4 EXIT ESC User Password lf user s authority is allowed they are allowed only Monitoring and Playback Default value set to 1111 69 User Manual Admin Password If administrator s authority is allowed all functions are available and default value set to 9999 6 10 4 Time Schedule It sets the date amp time period defined to Weekday Day amp Night Weekend Day amp Night Weekday Start Weekday End Day End MOVE 4 SELECT ENTER 5
57. n terminal RJ 45 10 eSATA Connection terminal for external eSATA HDD or HDD 11 Output port to connect PC monitor 12 RS 232C terminal 13 Connection terminal for expandable controller 16 User Manual Input Output terminal Function name 2 Speed dome camera 14 Relay out terminal 15 External sensor input terminal 16 Audio out D SUB connection terminal 17 DIGITAL IN OUT connection terminal gt S Refer to detailed description for installation amp the use from Install Manual 2 Reference 3 30SD MENU structure Menu structure is same as below picture and for each configuration method per Menu please refer to the explanation from chapter 4 to chapter 6 Event Save Text Do not save Event Action Preset System Even Comm Network xD DDNS NTP Serial Quick Setup Screen Screen Monitor Record System Manual Disk Schedule Security Event Time Schedule Special Time 3 4Function Menu Function menu lets mouse to control all of the product function and operation When using each function please click Icon by left button of mouse 17 User Manual and all functions of Function menu is available in the front function button either Function menu structure is same as following Pause 3 5 Factory default setting To make the product fatory default setup execute according to following order Sys
58. nd click Login button and can access In case of no change of password SNM 1288 factory default ID is admin and Password is 11111111 8 digit But ID can not be changable If user wants to change administrator password or create new user ID amp Password please z Cs aS e refer to the section 7 2 access user configuration Reference 73 User Manual 7 2 Connection User setup It must input user ID amp Password set into Configuration Tool program to log in WebViewer Metwore Std Corfiguuition Took Ere ds Men SVR 1545 of SAM Sten Se wort Treats Ure ER ONF PTZ het Ted Sankt d Secus hes Ue Ar Lei had Han Lo ion setino Twescted no 1 Everi Soute 2 on System ale heri dude Event Po Myry ures Set Local Account Change Une Owy Dwy Day Lings Change Ques It can use ID amp Password of administrator and 10 general users It is able to change administrator and user s ID for security Cancel by check Use of user s account disusing To My Unis SH Meee Account Lo Sten 5 64 Tm un Use Liitetty Adem DN FP TZ Ure P Secus Ve Use x Lined had EK Get Spite Log Lotion Setino Twescted no Everi Sote hag
59. ng or network monitoring sets Off the unused channel 6 3 1 3 Color After pressing ENTER it sets Color B W using left right button or mouse wheel 6 3 1 4 AGC Auto Gain Control AGC is to control video signal input range of camera connects It sets Enable Disable using left right button or mouse wheel after pressing ENTER 6 3 1 5 Brightness Contrast It can control Brightness amp Contrast of image After pressing ENTER it can set the value wants among the each from 9 to 9 using 41 User Manual left right button or mouse wheel 6 3 1 6 PTZ It sets PTZ Home Idle Time Port Address relate to PTZ device 6 3 1 6 1 PTZ Home PTZ Idle Time This is menu to setup camera supports PTZ Pan Tilt Zoom and it moves to PTZ assigned when there is no movement during specified time It sets Preset number amp Time using left right button or mouse after pressing ENTER 6 3 1 6 2 PTZ Port This is menu to setup camera supports PTZ Pan Tilt Zoom It sets PTZ port connects to relevant channel using left right button or mouse wheel after pressing ENTER 6 3 1 6 3 Address It is setup menu for the connected camera that can support PTZ Pan Tilt Zoom It can setup base address of PTZ device using up down button or mouse wheel after pressing ENTER button Refer to 7 4 9 PTZ use for the PTZ camera list can setup and method of lt a S e 2 detailed setup
60. nt Recording This menu can set recording by event when Event occurs Event recording can record by Sensor Motion Detection and Text To do Event recording must set All or Setup by Channel from Schedule Recording in advance After setup recondition condition it must set Event Recording menu from Schedule Recording to On for Event Recording setup of product Also it must set Event Source before Event Recording 6 6 1 Event Source Setup For Event Recording it looks into the method of Sensor Motion Detection and Text setup 6 6 1 1 Sensor Setup This menu is to set Action amp Type of sensor input It supports 2 types of Sensor Normal Open N O amp Normal Close N C Configure it according to the sensor type what the user uses Sensor Sensivity Area CHANGE A Y EXIT ESC All This is to select all sensors identically among Off N O N C Configuration It can set 9 sensors 51 59 separately 6 6 1 2 Motion Detection Setup This menu is for the configuration of event storage which was detected by motion detection 45 User Manual of each channel event Sensor Sensivity Area MOVE 4 SELECT ENTER EXIT ESC Motion Detection It sets 12 different sensitivities low 1 2 3 4 5 6 7 8 9 10 High 6 6 1 3 Text Setup This menu is for configuring input text information and user set Event Configuration value in OSD menu by Text D
61. or fire Random replacement of built in battery by other types of batteries may cause explosion The battery shall be replaced by the same battery User Manual Ze A lt The used batteries shall be disposed carefully because they can cause environment pollutions Dismantling and cleaning Do not dismantle repair or modify the product deliberately Doing so may cause a damage an electric shock or an injury Do not use water thinner or organic solvent for cleaning the product exterior Doing SO may cause a malfunction or an electric shock Use a dry cloth to clean the exterior During installation To get adequate ventilation install the product with at least 15cm of space between the cooling ventilation opening and a wall To prevent falling install the product in a flat area Dropping the product may cause an injury or a malfunction Avoid areas exposed to sun light or heat since they may cause deformation or a malfunction If a camera is installed while the DVR is recording image in another channel may be disrupted Start the storage after installing the camera is recommended During use Make sure the product is not exposed to shocks or shaking when using the product or during moving Do not move the product while it is in operation and apply strong shocks to the product or throw the product If hard disk drives other than those recommended are used additionally abnormal oper
62. ording 6 2 Time Setup System Time LM ME Quick Setup Schedule Recording Standard RI D Daylight Saving S Wit gt ES Data Format TANATMMYDD Lang Apply Data Time SELECT ENTER EXIT ESC Time setup of production is required before Record Setup It is very important to setup to local time for recording data protection of product It does not recommend changing the time during recording Factory set to Time zone setup is UTC 00 00 38 User Manual Dublin 6 2 1 Method of Time Setup When it changes the time during the condition of recording already it recommends Copy for important data before the time change because it changes the time of image recorded Press MENU at front or Menu button at Function Move to Quick Setup menu Select System Time of Quick Setup using Enter button or wheel When pressing button in normal order following 6 2 Time setting screen is appeared When moving to inferior menu of each click Enter or mouse after selecting through direction key or mouse Time Zone oelect time zone using front direction key or mouse wheel It changes time zone whenever pressing direction button To move to previous menu click right mouse or press Enter at front this is all the same at OSD menu Daylight Saving Summer Time application This menu synchronizes with Time some setup menu Namely this menu is activated when summer time zone is selected
63. orts multilingual for OSD menu Select the language wants Firmware Update 66 User Manual Save update firmware in USB and connect it to DVR Select firmware update item in the system menu and press ENTER When there is question to update or not peas Y and ENTER The device reboot with buzzer sound The firmware USB update is formed in dat file Firmware update via network is perform update file and select the DVR to update and click on tt When there is IP and MAC address port for the selected DVR type the password default 11111111 at Admin s Password SNM 128S and press Starting upgrade Rebooting message pops up after upgrade and press Y Load Configuration It sets DVR setup value stored in USB memory by transmitting to DVR Save Configuration oave preset setup status of DVR to USB device Default It used when it sets existing set value to first factory value to ship To create first value press Default System Log It can check the condition of setup change of system or HDD status HDD condition Power condition System alarm etc happen 6 10 2 Disk Setup Next explains the method how internal external HDD add or delete or format _____ Repeat Record Mode Warning Level Block Playback Disk Status MOVE a 4 SELECT ENTER EXIT ESC 67 User Manual Repair Record Mode When no recording space in HDD it deletes from first recorded data
64. p 3 The connection status of selected product can check on product list 62 User Manual 6 Product List My IPOLIS gt Product List Current product list is displayed If wanted product is not in the list click Product Registration at the bottom Location Information Management jusun SVR 1550 121 OFF View Check 2 korizen SNS 100 EENES ON rs SVR940 DVR TEST ON View Check E Be 4 teajun 11 OFF view Check 5 1292 SNS 400 ais OFF View kis VIEW See the log in page of selected product Delete Edit Delete the selected product password is needed for checking The product ID domain can not change at registered status When the product needs to change the ID first of all delete the desired product and register product again To register fixed IP to DDNS refer to following explanation for setup interval Server ID Password Status Net Registered MOVE 4 gt SELECT ENTER EXIT ESC Interval For the continuous registry it sets register period from WRS Interval According to setup value fixed IP address renews its data to DDNS server regularly If user sets register period to O or it does not transmit any data of DVR for 2 days its data is deleted from DDNS Server This menu sets server address to register SWR address is www samsungipolis com ID 63 User Manual Input ID registered when joins to D
65. rk as explained in product manual In case when product fell down and damaged In case when there is outstanding change to performance 86 User Manual Compatible HDD List Seagate Technology Western Digital 750GB S13 50840SCE 750GB WD7500AVCS 500GB ST3500830SCE 500GB WD5000AVJS 250GB ST3250820SCE 250GB WD2500AVJS Compatible Media List Specification _____ Mode Video Input 9 BNC Connectors NTSC PAL Auto detect Monitor 2 BNC 1 Main Monitor 1 Spot Monitor 1 VGA Video Output Loop Out 9 with Auto Termination Video Compression MPEG4 JPEG 5 1285 Only Speed 2 0 225fps NTSC PAL Resolution D1 4CIF 2CIF HALF CIF Display Recording 5 Levels of Compression Rate Record Frame Rate Quality Adjustment Pre Post 55 60sec Recording Time Calendar Event Thumbnail Text Smart Remote Playback Only Search Mode Playback Mode CD O D D Q Forward Reverse Pause 1 2x 1x 2x 4x 8x 16x 32x 87 User Manual 64x Multi Screen 1 4 9 Simultaneous Live Display Playback Record Multiplex Function Remote Monitoring Playback Camera Title Motion Detection 22x15 NTSC 22x18 PAL grid 22 Characters per Channel NT A Automatic E mail Internal Buzzer Relay out Pop up ocreen Network Event Internal 250GB basic 2 SATA HDD install possible External 1 e SATA SVS 5E DVD Writer CD R 700MB Media DVD R 4 7G Media e SATA USB Network sensor Input
66. shi Exhortation 16X TDK Exhortation 16X TDK Exhortation 16X 5 3 2 REA Type Channel Select Disk 1Disk s 185 ur MIL Mem FAT32 Format ENTISCPEESETTSGESMIS EXIT ESC It can Copy using HDD USB memory It can playback using MiniPlayer Network Manager Select channel location and open the channel list as following using Enter button or mouse wheel 35 User Manual Type Channel List Selecting Channel From To Select Disk Start FAT32 Format Set All Select RE4 using up down button or mouse wheel Press Enter from Channel part to pop up channel selection window or pop up Channel List using mouse wheel Among 9 channels it can select a part or all channels Select the channel from Channel list and press Enter button or click left mouse button Appoint starting date amp time wants to Copy After selecting the part wants to change it can setup using up down key or mouse wheel It appoints the last date amp time wants to Copy It can set up using up down button at front or mouse wheel Set up as same as above From Select the media wants to Copy Press Enter from Select Disk or use mouse to select It starts COPY using Enter button or mouse click In case of unformatted USB memory or HDD format to FAT32 using Enter button or mouse click and Copy AN It cannot playback Copy file that is not copied 100 from PC normally 36 User Manual 9 3 3 AVI
67. tem configuration gt System gt configuration If pressing Enter button after selecting default configuration system will be initialized If window pops up showing the message Warming system will be initialized Fatory default select Yes and press Enter button for Factory default Factory Default Quick Setup Schedule Recording DONNE Quality C IF UTC 00 00 Dublin 18 User Manual Off MM DD YYYY Current Time Language English one 0 Switch to Event Off Screen ocreen Setup Covert Channel All UnCheck m m Multi Mode Ch1 3 5 7 VGA Mode 800x600 56Hz Info Level BENI Remocon ID UnCheck Record Audio Channel Record Setup E Recording Gain Ch1 Sync Channel Audio Mix Record No Video Manual Channel Number Macro Speed Mix On All Not Use 0 75fps User Manual Peet it Inn Mem Se my mM Nes Im ______ wt 0 e o ee Saad Speed S my le Em it o o mem SS Event Setup D All Sensitivity Area Set All Text Recording ff Sync Text With Device seek Header Header 1 Header 2 Delimiter Timeout ms Lines Jul 20 Manual ff Header Header2 ODOA 1000 20 User Manual a gt gt o 8 Action Source
68. up Channel Number Schedule e TELLES Resolution Special Time Event Recording MOVE A gt SELECT ENTER EXIT ESC 6 5 2 Setup by Channel It can set Time Schedule Macro differently by each channel It sets 1 4CH to Weekday day Low and can set 5 9 to Full Time High Recording Speed Quality There are total 5 setup conditions No Rec Low Standard High Custom Custom can set the status of Speed Quality and Resolution to user wants Resolution There are total 3 setup conditions CIF HALF D1 Resolution value set here is applied to user s recording Event recording 360x240 NTSC 360x288 PAL HALF 720x240 NTSC 720x288 PAL HALF D1 image D1 720 480 NTSC 720x576 PAL FULL D1 image Special Time Recording This menu is used when it differ recording condition with setup specific time zone Namely if it sets specific time zone to Weekday Day it can record differently according to 2 setup conditions Specific time zone sets from System menu There are total 5 setup conditions No Rec Low Standard High Same as above Recording apply same value set from Speed Quality Event Recording It sets On Off using left right button or mouse after pressing ENTER Detailed Event recording condition sets from Event Recording menu According to Event recording setup it can set here whether it records based on Event recording 44 User Manual setup 6 6 Eve
69. using the wheel Event Channel Select channel wants to search It can select All Ch1 Ch 9 Event Type Select Event type wants to search It can select All MD Sensor V Loss Text 5 2 4 Thumbnail Search It appoints specific time through up down button at front or mouse wheel and searches specific channel in regular interval Searched result is shown in thumbnail type It selects searched thumbnail to move relevant date time and play it Channel Start Time Interval Search Channel It selects the channel wants to search After selecting it can change the value using up down key or change it through mouse wheel Start Time Input the starting date amp time wants to search After moving to the location to change using left right key and press Enter it can change the value through up down key or mouse wheel 33 User Manual Interval Image view Image Selection 5 3 Copy It divides into regular base for searching and indicates result It can change through up down button or mouse wheel If user pushes Search button 16 images per second will be displayed based on the start time If user wants to return to search mode please use Func button or mouse wheel Click searched image through Thumbnail search and start Play from the time selects It can Play relevant image through Enter button or mouse click This menu is to Copy recorded image There are DVD RE4 and AVI in Copy type Th
70. wer Support Record Search amp Playback by time remotely Support 10 100Mbps Ethernet xDSL Multiple DVR connection GUI structure for the convenience of users and mouse support Easy firmware upgrading using USB memory Recorded image copy function through USB terminal Support PTZ control SPEED DOME PRESET function Multilingual support Korean English Italian Spanish Japanese etc Controllable 16 DVRs conveniently through 1 Remote control Chapter 3 Product Description 13 User Manual 3 1 Front part e COPY part Classification Function It uses when Copy recorded images through DVD CD 1 DVD Multi for Copy media Channel LED Classification Function 2 Channel LED It shows the status of image input and event action USB Port Classification Function It is connection terminal for external devices Mouse 3 USB1 USB2 USB memory stick Signal part Classification Function REC lamp It indicates whether it records HDD lamp It indicates whether HDD works NETWORK lamp It indicates whether network is connected EVENT lamp It indicates whether event is detected COPY lamp It indicates whether Copy works PLAY lamp It indicates whether status of Play action 14 User Manual Power part Classification Function 5 Power button It is On Off power REC button Classification Function 6 REC button It starts or stops manual recording Channel selection button Classification Function 7 Chann
71. ymbols displayed for each item Warning Refers to information users need to know in order to prevent serious injury or death Caution Provides information users need to know in order to prevent minor injury or product damage Ze lt A NS CN S Before installation Verify the supplied voltage AC100V AC240V before connecting the power supply Make sure the power supply is off before installation Do not install in a very humid environment Doing so may cause an electric shock or fire Make sure ground line is connected to reduce electric shock risk During operation Do not open the product cover except qualified personnel or system installer Opening the product cover may cause an electric shock Do not plug multiple appliances into one power outlet Doing so may cause fire Do not place dishes containing water or heavy objects on the product Doing so may cause a malfunction Do not use in areas containing inflammable materials like propane gas and gasoline or in areas that generate dust Doing so may cause an explosion or fire Do not touch the power line with a wet hand Doing so may cause an electric shock Do not insert a hand into the opening of the DVD Doing so may cause an injury Make sure conduction materials do not enter the cooling ventilator opening Do not apply excessive force when pulling on the power cord Damaging the cord may cause an electric shock

User Manual 1

Contents

Download Pdf Manuals

Related Search

Related Contents