Professional Multifunctional Car Mobile DVR USER MANUAL
Contents
1. Record Relative Issues 21 1 2 Q Device cannot make a record successfully A he following reasons might cause this problem a b g d Recode mode setup in a wrong way There are 3 kinds of record mode Auto Timed and Alarm Before recording user must to setup record mode in system If it was set in Alarm mode but has no alarm right now device will not make a record If it was set in Timed mode but the current time not within timed period same as above device will not make a record as well Overwritten function was OFF and the capacity of SD card less than 500M in this situation device will stop recording The ERR light of front panel shine Can pass to look into a system information If SD card space shows in O please check whether SD card has been formatted before use and inserts or not Record mode be set to OFF in each channel Please press Enter button on remote control to switch OFF to ON mode before record otherwise device will not make any record Q Record files have no audio A Probably of the reason is as follows www szsinocam com Professional Mobile DVR a Audio function setup in OFF mode in system b Use wrong input cables Alarm Relative Issues 1 Q Alarm input invalid A May be the following reason to cause this problem a Alarm setup in a wrong way in syste b Alarm input cable did not connect to the device o2. exists and it is the one that is recording image at present 5 Q HDD and SD card indicator not works or keep flicker A Possible reasons are as follows a No record task according to system set up b SD card and HDD both record full and overwrite function be set in OFF statues 23
3. K key into the system menu Factory Default Admin Password I11111 2 2 System Main Interface The main interface will be displayed on the screen when you login successfully it contains www szsinocam com Professional Mobile DVR 2 2 1 Recording setup Record Parameters a ka E Record mode AUTO Timed Alarm recording press OK to select Resolution D1 HD1 CIF press OK to select Audio input AVINI AVIN2 OK to select Overwritten Overwritten on off switch Press OK key to select Channel Quality Frame rate Record Channel recording parameters Press 7 www szsinocam com Professional Mobile DVR OK key to setup TIME LIST Recording time setup Only available in timed recording mode Press OK key to enter the following time list Note Timing on off is a cyclic course has no priority 2 3 Record replay Use left right up down to select playback and press OK key enter the following recording search menu Note System will highlight the valid record info Yellow have recording www szsinocam com Professional Mobile DVR Refresh the state table when search the other month One time for one day REC TYPE press OK to select the type All or Alarm The default is ALL CHANNEL SELECT Press OK to select the channel 1 2 3 4 The default is CH1 DATE Press t
4. d Function 17 www szsinocam com Professional Mobile DVR 2 5 3 G sensor Speed Setting 2 5 4 Device turn on off setting On off Model Manual Timing Alarm Recording Model Delay time Press OK to enter the time you want delay Max 120 Mins can be set 2 5 5 Temperature setting Extend Function 18 www szsinocam com Professional Mobile DVR Need Hardware support 2 5 6 GPS Setting Over Lower speed alarm according GPS an 0O00 _ BAUDFATE INTERVA 2 5 8 WIFI Setting Extend Setting 19 www szsinocam com Professional Mobile DVR 3 Device installation 3 1 Cable mode The input voltage is DC 8V 36V yx use ignition switch to control video record delay time working DC OUT NEGATIVE Black signal in yellow Red cable connect positive of the car storage battery black cable connect negative while yellow cable connect independent ignition switch or independent positive 20 www szsinocam com Positive ea Car Power Professional Mobile DVR switch connection f DCIN red Signal OUT 4 Y DCIN black ow Fuse box negative Red cable and yellow cable together connect power positive of the car storage battery while black cable connect negative If set timing switch please connect positive and negative to the car storage battery directly it will effect when ignition signal break down if set timing it will invalid when power off
5. ect 10 www szsinocam com Professional Mobile DVR CH k pen H2 CHq da Alarm Management dispose alarm information automatically or automatic Press OK to select Alarm Output S Alarm output time setup Level Setup l Setup input alarm level signal HIGH high level input signal will enable alarm LOW low level input signal enable alarm Press OK to select Recording Delay M the time of the alarm recording when alarm signal occurs Select and press SAVE to save all setup 2 4 2 PTZ Setup Li e gt support 4 channels Setup the address code for each channel Setup Baud rate support 600 1200 2400 4800 9600 19200 38400 57600 115200 e PTZ Protocol support pelco p pelco D 2 4 3 Time Setup 11 www szsinocam com Professional Mobile DVR e sere j DATE FORMAT TIME FORMAT _ ce Date Use direction keys to enter use number keys to change the current date Date Format Use OK to select the Year Month Day Day Month Year Month Day Year Time Use direction keys to enter use digit keys to change the current time Select and press SAVE to save all setup 2 4 4 Device Maintenance 12 www sz
6. he digit keys to setup the date The default is TODAY STARTS TIME Press the digit keys to setup the time default time is 00 00 END TIME Press the digit keys to setup the end time default time is 23 59 SEARCH Select the Search button press OK pop out the following search results menu 1 SWiTcH Press the direction keys to view recording information press OK to play press EXIT return to previous menu Press the direction keys to select First Up Next Last and press OK go to corresponding page Press the direction keys to select ALL REVERSE BACKUP 2 4 System setup Use left right up down to select system setup and press OK key enter the www szsinocam com Professional Mobile DVR following recording search menu TOaToTe v kane _ 2 4 1Alarm setup Alarm parameter a me m ene en eS ee O O n a a san N swe a on P e ee S lt ee Disk Invalid when video storage fails whether the alarm information occur On Off switch ON Enable alarm input OFF Disable alarm input Press OK to select Space Unavailable alarm information occurs when room for video storage is less than a certain capacity and cycling record is OFF Press OK to select Video Lost ON Enable alarm recording OFF Disable alarm recording Press OK to sel
7. he language been changed 14 www szsinocam com Professional Mobile DVR 2 4 7 Display Setup L J J j CHANNEL SWITCH MASKE AREA Channel Name Channel Name setup use direction keys to edit use OK to select Use APPLY to save all settings Name Position Change name position use direction keys to edit use OK to select use APPLY to save all setup PREVIEW JYES NO to enter use direction keys to edit use OK to select use APPLY to save all setup PREVIEW TIME DISPLAY Show the preview time Yes No to enter use direction keys to edit use OK to select use APPLY to save setting RECORDING TIME DISPLAY Yes enable to composite NO disable to composite use OK toselectuse APPLY to save all setup Factory Default use direction keys to renew to factory setup use APPLY to save all setup 2 4 8 Password Setup 15 www szsinocam com Professional Mobile DVR ee i PASSWORD ft a sa MP AG Mo e w PASSWORD for password setting use direction keys to edit press OK for select DEVICE ID Use for configurating 3G function device number Distinguish device when several 3G exist at the same time press the Numbers keys to enter USER PASSWORD Use for user password setting use direction keys to edit use Numbers keys to se
8. lect PASSWORD CONFIRMATION Use for user password confirmation use direction to edit then input the numbers ADMIN PASSWORD Only for Admin use direction keys to edit use Numbers keys to select PASSWORD CONFIRMATION For admin password setup use direction keys to edit use Number Keys to select 2 4 9 System Info Se males i SERIAL WO 3 SOFTWAFRE VERSION Mac ADDRESS CARD MODULE SIGNAL MODULE CONNECT MODULE Showing the device system information FIRMWARE VERSION NO This device software version No HARDWARE VERSION NO Hardware version NO 2 4 10 Formatting Format SD Card 16 www szsinocam com Professional Mobile DVR EZAVALID RECTIME re Warning FORMAT Select formatting keys SD card device please select SD card format press OK the system pop out the following windows YES NO To start formatting press OK to input Note Formatting will delete all data in SD Cards 2 5 Vehicle Management In main menu use direction keys to select SYSTEM SETTING press OK to enter the system setting interface including Basic setting Speed setting G sensor Setting Device turn on off setting Temperature Setting GPS Setting Wireless setting WIFI Setting 2 5 1 Basic Setting Company Name Vehicle NO Driver Name press OK to enter then enter the Keyboard interface move the cursor press OK to enter the letter l eo n ee ee ITIN 2 5 2 Speed Setting Exten
9. nsiderations of the modules the connector signal definitions in the back panel the interface definition and user s operations II Gl www szsinocam com Professional Mobile DVR 1 Appearance Front view Back View AVOUT EX VIDEO VIN3 4 AVIN2 AVIN1 ALM RS232 485 POWER IN 2 55 89 up eeloeeres A 95 98 98 valvenn es oo www szsinocam com Professional Mobile DVR 1 1 Remote Controller Sa e button ER To enter system settings 0 9 key In the setting mode 0 9 is used to select the number of menu items In playback mode the key 1 2 3 4 to select single channel playback and the Key 5 for 4 channel playback Enter button button for setting system parameter selecting and playing When playback this button can overlay all kinds of information data speed GPS black box etc up down left right left and right buttons are use for decreasing or increasing volume To display system info under monitoring mode Rewind button In play mode press REW button to select 2 4 8 16 normal forward play Mobile DVR Record button Reserved Forward button In play mode press this button to select 2 4 8 16 normal backward play Pause button Pause the normal playing www szsinocam com Professional Mobile DVR 1 2 Front panel 1 2 1 LED indicators PWR Power LED LED light means system has powered on ERR Error promt LED on fault on SD cards LED off normal VLOS video indicato
10. r if bright Video Loss REC Recording indicator LED on normal GPS GPS indicator LED on normal SD SD indicator When SD card records SD light flicker RJ45 Network connector HDD series e SD SD indicator LED on SD card exists When SD card records SD light flicker 1 2 2 SDcard e RM SD card remove keys In system normal work status SD cards can ONLY be safety removed by press REMOVE keys about 3 seconds till SD led indicators off and SD cards will be reloaded automatically if the cards do not be removed within 15 seconds e SDcard Slot for SD card 1 3 Back panel AVOUT EX VIDEO VIN3 4 AVIN2 AVIN1 ALM RS232 485 POWER IN 35 99 So eeloeeress gt 55 98 JAH valugueeenr Ya www szsinocam com Professional Mobile DVR e POWER IN power port red cable connect power positive black cable connect power negative yellow ine ACC signal cable If need timed record or igniting record please connect ACC cable in the car ALM alarm signals and other signals input interface e E X VIDEO audio input subsidiary interface Video Rearview System e V1 V4 camera and audio input interface AVOUT monitor output port 2 GUI 2 1 Login e When password switch set close after device startup press OK key into the system menu e When password switch set open after device startup press OK key need input correct device No User name and password Cursor will move to Login press O
11. r cable not works c Alarm trigger signal to get an electric shock failure 2 Q Alarm output invalid A Possible reason is as follows a Cable connection in a wrong way b System setting in a wrong way such as do not open alarm output or level output setting is not correct Other Issues 1 Q When power on why the power light is not bright A Possible reasons are as follows a Voltage range is not within 7V 42V b Fuse in the power line has burning out c Ignition signal has not connected 2 Q ERR indicator keep on light A The following errors will cause the ERR indicator keep on light a 1 SD card and HDD didn t be inserted Or SD card and HDD have inserted without unusual system partition So device can t be identified 2 Disc has wrong reading and writing b Singlechip works unusually 3 Q Why REC indicator is off or flicker A There are three states on the SD card indicator OFF ON and Flicker OFF can t find the disk or it s not recording ON SD card exists SD card is working 22 www szsinocam com Professional Mobile DVR Flicker HDD exists HDD is working 4 Q SD card indicator not works or keep flicker A The SD card indicator has 3 medium statuses OFF ON and Flicker respectively meaning as follows OFF This SD card didn t be inserted or can not be identified by the equipments ON This SD card existence but it isn t the one that is recording image at present Flicker This SD card
12. sinocam com Professional Mobile DVR Export Current Configuration Export all device configurations to SD card Import Current Configuration Import the SD info to device Renew Original Setup Renew all setup to original setup This operation will delete all setup Note when the devices have the same configuration you can use the export import setup 1e Setup one devices then import to others Logging Query Start Date For log search press the digit keys to setup End date For log search press the digit keys to setup Start time For log search press the digit keys to setup End time For log search press the digit keys to setup Search Search the all log information occurred between Start time and End time Press Enter key to select SEARCH Select the Search button press OK pop out the following search results menu 2 4 5 Network Settings Extend Function 13 www szsinocam com Professional Mobile DVR w 2 4 6 Recording setup System PAL NTSC press OK key to select i O00 E n n ii no n Si yn System language Use up down to switchover use OK to switch between Chinese English and then use SAVE to confirm Note The system will re start when t
13. www szsinocam com Professional Mobile DVR Professional Multifunctional Car Mobile DVR USER MANUAL V2 3 www szsinocam com Professional Mobile DVR Tips about safety instruction 8 direction Please read this Before installing and using please read the fol lowing instruction before warning careful ly installing and using it contains electronic devices please hold gently Keep in a safety 2 All installing and maintaining should be hold by place for the future professionals reference 3 Do not install in the place often eroding by rain and other liquids 4 The installation and all materials must bear the fuselage weight 5 Keep the fuselage away from the heat dust and high intensity magnetic fi led 6 Do not put the heavy on the device any sundries around 50 cm 7 Do not flushing the device directly when cleaning the car 8 Do not mixing the output batteries that not fit for the device 9 Do not insert your fingers and other objects into the gap when it works 10 Do not take the devices about without the professionals 11 Do not change any modules when the host is charged 12 When replace the module make sure the module is fastening in the host tightly Introduction The manual is about the features and specifications of one kind of car DVR it is an integration of 4 monitoring and recording vehicle traveling data recorder wireless data transmission In the manual it describe the functions and co
Download Pdf Manuals
Related Search