User Manual ver.2.0 Megapixel IP Dome Camera
Contents
1. Day gt Night Threshold Def 20 c Noise Filter Mode Interworking TDN Grey Mode A H Wd ho I shutter Speed Value 4 30 bs sec IRIS Mode Auto w Other Setting Brightness Def127 127 L M Contrast Def 127 Frequency Mode 60 Hz J EC p Megapixel IP Camera Manual www proctorsystems com 52 55 Oproctor Security Systems Flip Horizontal Flip The image appear left and right side cosses when on is selected Vertical Flip The image appear up and down side croses when on is seleted Refer to the principle of f Ipping image Input No Flippi ABCDE ad lt A Auto Exposure amp Auto White Balance AE amp AWB AE control gain iris and exposure time for image quality automatically AWB control R GB gain for color balance automatically AEWB Mode AEWB AE amp AWB function is enable AE OnlyAE function is enable AWB Only AWB function is enable None AE amp AWB function is disable AWB Index Indoor Select this option when camera is installed at indoor Outdoor Select this option when camera is installed at outdoor AEIndex Day Select this option when you want better image quality Night Select this option when you want brighter image AE Mode Auto AE adjust brightness by internal value automatically Manual AE adjust brightness by the values which are AE Target AE MAX and AE MIN 53 55 Megapixel IP Camera Manual www proctorsyste2. button to start to record Elle Record Press Stop button to stop to record FolderD _storag Filename Cross Road address hh mm ss will be generated in the specif ed folder depending on 100 10 7 0MB AVI f le named IP address hh mm ss or File name IP whether the path specif ed a folder or a pref x of the f le name Display Buffer Display Buf er Set the number of video frames to be buf ered before being displayed on web browser Larger value results in smoother video by sacrif cing the latency A setting of 10 15 frames can be used generally for most situations Video Monitoring with Decoder System Once camera s IP address is set in the remote IP address section of the decoder the decoder system will connect to camera and start receiving the video images Normally a monitor connected to the decoder will display video images 13 55 Megapixel IP Camera Manual www proctorsystems com Security Systems Oproctor Initialization of IP address If a system IP address is lost the system can be reset to the system default IP address using the reset button in the back side of the system 1 Whiresystme isin operation press the reset button for more than 5 seconds 2 The system will reboot automatically 3 Oncethe system reboots IP address will be set to the system default as below 14 55 Megapixel IP Camera Manual www proctorsystems com Oproctor Security Systems 4 Remote Conf guration
3. Event Record section Number of Frame The number of JPEG frames is conf gured This setting is applicable only when JPEG Capture is selected E mail Test E mail sending can be tested with this button Please note that conf gured settings should be saved f rst by pressing Apply button before using E mail Test function One of the following messages will come as a result of the test 38 55 Megapixel IP Camera Manual www proctorsystems com Oproctor Security Systems Deco Test E mail has been sent successfully Reception in the client E mail sent successfully can be checked Failed to connect SMTP Connection to the SMTP server failed It is necessary to check if server the server is reachable and server address and port are correct EM The server is reachable but authentication failed ID and or Authentication failed password need to be checked The server is reachable but mail sending failed dueto a reason other than authentication This error happens often when the server authenticates according to its own rule For example IP addresses of a specif c range or addressed of a specif c suf x are allowed SMTP server rejected the mail 39 55 Megapixel IP Camera Manual www proctorsystems com Security Systems Oproctor FTP Upload Specify the information to upload event information when FTP is selected as an event action Server Address Enter an address of an FTP server to receive video
4. IP mode Fixed IP or DHCP Dynamic Host Conf guration Protocol Depending on the selected mode further conf guration items come as follows Local IP Fixed IP address Local Gateway IP address Gatewa y Local Subnet Subnet mask Please ask IP address information from ISP provider or network manager NS Obtain DNS server address automatically Get DNS server address automatically when IP mode is DHCP Use the following DNS server addresses Enter the DNS server IP address Primary DNS server Secondary DNS server Domain Name System DNS is a database system that translates a computer s fully qualif ed domain name into an IP address Networked computers use IP addresses to locate and connect to each other but IP addresses can be dif cult for people to remember For example on the web it s much easier to remember the domain name www amazon com than it is to remember its corresponding IP address 207 171 166 48 Each organization that maintains a computer network Ipv6 Ipv6 Address Enter the deginated Ipv6 address Ipv6 Subnet Pref x Length Enter the bit number of Ipv6 Subnet Ipv6 Default Gateway Enter the deginated Ipv6 gateway 27 55 Megapixel IP Camera Manual www proctorsystems com oproctor Security Systems IpveLinkLocal Display Ipv6 Link Local Port Base Port 1025 65535 Enter the Base Port number Network base port is use for communication with
5. Using Web Brower Remote setting is available by using web browser Enter IP address of camera and then a live view screen appears as below Press Setup button located in the upper right area of the monitoring screen to go to the server setup For Remote Setting user should be authorized higher than manager level M Enter IP Address Edi vide ETT E ONES WU C 5 99 ala E deo Surveillance Window internet Explorer 0 Y K Press Setup button we M Video surveillance Wt Video Select f qu h m mpi ri i L HERE Orga y The conf gurations are grouped into 10 categories System Video Audio Network Serial Event PTZ Record User and Camera Any conf guration changes are not applied until Apply button is pressed Leaving the page without pressing Apply button any changes in the page will be discarded 15 55 Megapixel IP Camera Manual www proctorsystems com Security Systems Oproctor System Conf guration Setup Live View System Video Audio Network Serial Event Preset Record User Camera system General System ID Bumin OSD System ID alphanumeric characters only Language English Iz Apply Firmware Version Enc 1 103C 006 Board ID 79 Upgrade Firmware Upgrade Config Backup amp Restore Backup Config Backup Restore Config Restore Time Start Time 2006 12 31 12 00 00 current Time 2006 12 31 12 00 36 Time Format YYYY MM DD h
6. asfollows Record of No recording Continuous Records continuously Disconnect Recording is started when the system loses the connection to its last client Decoder VMS NVR etc When there are multiple clients and one of the client is disconnected this doesn t happen EventType Records when an event conf guredin EventType setting happens Checking status of recording Recording status can be checked on the main view page Live View Setup Video Select e O Primary Secondary View Size Q 5095 910096 46 55 Megapixel IP Camera Manual www proctorsystems com Oproctor Security Systems Search and Playback Recorded video and audio data can be saved as AVI format in the disk In general one AVI f le is created for an event in case of event based recording However it is possible that recorded data by serious of events happening continuously can be merged to a single AVI f le depending on pre post event time setting The size of f leis limited to 10 200MB or 10 minutes In case of continuous recording AVI f les are created in series and the size of each is limited to 10 200MB or 10 minutes Search Actual recording A f le currently being recorded doesn t appear until it is completed In case of Continuous recording af le will be shown after 10 minutes from the start of recording for af le is generated every 10 minutes 1 Press Search Page button onthe Record setup page Dates with recordin
7. be stored Restore Stored conf guration can be browsed and restored The server is rebooted once Confg Restore button IS pressed Time Start Time The latest the camera s booting date and time Current Time Current date amp time Enter a new date and time and press Set Current Time button to update date amp time TimeFormat Change the time format Selectable time formats are as below YYYYIMM DD hh mm ss Ex 2010 4 11 18 18 42 DD MM YYYY hh mm ss Ex 11 4 2010 18 18 42 MM DD YYYY hh mm ss Ex 4 11 2010 18 18 42 Time Zone Select time zone of where the camera is installed Depending on the time zone Daylight Saving Time will work automatically A time zone isa region of the earth that has uniform standard time usually referred to asthe local time By convention time zones compute their local time as an of set from UTC Coordinated Universal Time In casual use GMT Greenwich Mean Time can be considered equivalent to UTC Local time is UTC plusthe current time zone of set forthe considered location 18 55 Megapixel IP Camera Manual www proctorsystems com Oproctor Security Systems Automatically synchronize with NTP server Synchronize the camera time with an NTP server using NTP network time protocol Name of the NTP server should be registered on NTP server Name The Network Time Protocol NTP is a protocol for synchronizing the clocks of computer systems over pack
8. camera one system becomes a Local system and the other a Remote system Generally a system which is being used by the user is called as Local system Then actions for events can be conf gured for events from the remote system as well as for local system For example it is possible to turn on an alarm device In local center decoder system when a sensor device in remote site IP camera is triggered Local section conf gures the actions for events from local self system and conf guration activates local devices and Remote sections conf gure the actions for events from remote peer system Thefollowing table lists the possible actionsfor events BLNNMEL NN Triggers alarm relay port l Sends E mail to the specif ed address AVI E mail f le can be attached FTP Upload AVI f le to a specif ed FTP server Move to the Preset position Local amp Remote Event Conf guration Sensor Conf gure the actions when the sensor is activated Multiple actions can be set for a single event On Video Loss Conf gure the actions when video input signal islost Multiple actions can be set for a single event On Motion Conf gure the actions when motion is detected Multiple actions can be set for a single event On Disconnect Conf gure the actions when the link connection with peer system is disconnected Multiple actions can be set for a single event Duration Set the duration of alarm or beep activation in case of an event If
9. it is set to continuous it will be in active state until an operator reset it manually 37 55 Megapixel IP Camera Manual www proctorsystems com jpraoctar Security Systems E mail Notif cation Specify the information to send event information when E mail is selected as an event action Server Address Enter an address of mail SMTP server Port Specify a port for SMTP operation Port 25 is the default port in SMTP operation If a dif erent port is conf gured in the SMTP server this port needsto be changed accordingly Sender Address Enter an account registered in the SMTP server Authentication on SMTP server Thisfunction is applicable when the E mail server requires authentication for sending E mail ID amp password When the server requires authentication ID and Password of an E mail account need to be entered SSL Thisfunction is applicable when the E mail server requires encryption for sending E mail Destination address Enter Destination address More than one address can be entered by delimiting comma or semi colon Destination address can take up to 63 characters Video Clip Attaching Video clip stored at the moment of event can be attached as an AVI or JPEG f le format When dual encoding is enabled Primary video Secondary video H 264 only or JPEG Capture can be selected The duration of video clip can be conf gured with Pre Event Time and Post Event Time in
10. Bottom O Top Font Size 12x12 v Output Format Output Format INTSC 720x480 Y Megapixel IP Camera Manual www proctorsystems com 20 55 Security Systems Oproctor Encode 1 Enable Preview Select ON to enable to display video on the monitor that is connected to the composite or HD SDI video port Selectthe Output format accordingly in the end of the Video page Note that when Enable Preview isON dual streaming is not available When the video is transmitted directly to the monitor through BNC cable the video does not go thorough network and encoding Therefore there isless delay and no an ef ect from network limitation Resolution Select video encoding resolution Framerate Determine the maximum number of frames per second forthe video stream 1 2 3 4 5 6 8 10 15 20 25 and 30 frame rate can be selected The actual frame rate of video can be less than the maximum frame rate set due to the network bandwidth limitation Preference Select encoding mode to control video quality or bitrate Quality VBR or Bit rate CBR If Bitrate selected the video encoding will be ef ected by the Bitrate value entered Therefore Bitrate mode corresponds to CBR Constant Bit rate encoding If Quality selected the video encoding will be ef ected by the quality of image selected Therefore Quality mode corresponds to VBR Variable Bit Rate encoding Quality Select Video quality 7 levels of qual
11. Contro external PTZ devices are connected through serial port It is possible to make zooming control by Zoom in out buttons of PTZ control Panel In order to use digital zoom select Digital zoom ON inthe Camera tab Stop Stop on going PTZ action Focus Near Focus Far Auto Focus Adjust the focus of the lens Select Preset Set preset position and moveto the specif c preset position Goto Move to the selected preset entry if the preset entry is set Set Set the current position to the selected preset entry Clear Delete the selected preset entry Sensor Input Display the status of the sensor in real time This camera supports one sensor input When the sensor of the camera is working the sensor light turns red 12 55 Megapixel IP Camera Manual www proctorsystems com Oproctor gt s m rme Security Systems Alarm Output Operate the alarm device by pressing the number icon This camera supportsone alarm output A number icon indicates status of the alarm device Snapshot Capture video images and store them as BMP or J PEG f les Talk Transfer audio from PC s micto the camera File Record Recording to an AVI f leon Live View page is available AVI f les are generated in the specif ed folder or in specif ed f lename on the PC where web browser is running Press Set button to select folder or create a new folder Enter the f le name on Filename f eld Press Start
12. Network seral Event Preset Record User Camera Network em Local IP Mode Fixed IP Local IP 182 168 10 114 Local Gateway 192 168 10 1 Local Subnet 255 255 0 0 DONS Obtain DNS server address automatically Use the following DNS server addresses Primary DNS Server 168 126 63 1 secondary DNS Server 0 0 0 0 IPv6 amp Address IPv6 Subnet Prefix Length 0 IPvy6 Default Gateway IPv6 LinkLocal fe80 21c 63fF fea 10a 64 Base Port 2222 1025 65535 HTTP Port 80 80 1025 65535 HTTPS Port 443 443 1025 65535 RTSP Port 554 554 1025 55535 UPNP IPv6 Port Discovery Of O On Of On Of O On Zerocuonf 000 WS Discovery Authentication RTSP Authentication of On HTTPAPI Authentication of On One way Streaming Mode SNMP SNMP Listen port D 0 161 1025 65535 SNMP Trap Destination IP 0 0 0 0 SNMP Trap Destination Pot a D 162 1025 65535 Multicast Multicast IP 224 10 0 2 224 0 0 0 239 255 255 255 DDNS DDNS Server None TrueDNS DynDNS Vdyn Check IP Disable Flow Control Mode Suppression Mode IP Filtering Setup IP Filtering Setup Current IP 192 168 10 114 Current Domain Mot RegisteredB MAC Address 00 1C 63 AF 01 0A4 Connecting Bitrate Control IP Filtering Setup Address Information 26 55 Megapixel IP Camera Manual www proctorsystems com jpraoctar Security Systems Local IP mode Select the
13. On image remove color always gery image Of image add color always color image Shutter Speed Mode Shutter Speed Mode conf gures whether Shutter Speed Value setting is to be applied or not Enabling Shutter Speed Mode is useful to get brighter video in a low illumination environment by sacrif cing the framerate On Shutter Speed setting is applied Of Shutter Speed setting is not applied 54 55 Megapixel IP Camera Manual www proctorsystems com Oproctor Security Systems Shutter Speed Value Shutter speed can be selected in the range of 1 30 sec to 1 sec When 1 6 sec is selected for example the image sensor is exposed for 1 6 sec and thus max 6 frames can be obtained for one second Megapixel IP camera support Auto IRIS Lens Mode Auto IRIS is controlled by AE Open IRIS force max opening Close IRIS force closing Other Set ng Bnghtness The image brightness can be adjusted in the range 0 255 where a highter value produses a brighter image 127 default O thedarkest 255 the brightst Contrast Adjust the image s contrast by rasing or lowering the value in this f eld 127 default 0 the weakest 255 the strongest Frequency Mode Operation frequency can be selected in order to avoid f ickering under f uorescent light The value can be either 50Hz or 60Hz 127 default 0 the weakest 255 the strongest 55 55 Megapixel IP Camera Manual www proctorsystems com
14. QOproctor Security Systems Megapixel IP Dome Camera 1 3MP 2 0MP 3 0MP User Manual ver2 0 Oproctor Security Systems Safety Precaution We appreciate your purchasing Proctor Megapixel IP Camera Before installing the product please read the following with care Make sure to turn off the power before installing system Do not install under the direct sunlight or in dusty areas Make sure to use the product within the temperature and humidity specified in the Specification Do not operate the product in presence of vibrations or strong magnetic fields Do not put electrically conducting materials in the ventilation hole Do not open the top cover of the products It may cause a failure or electric shock on the components To prevent from overheating make sure to keep the distance at least 10cm from the ventilation hole Make sure proper voltage before connecting the power 2 55 Megapixel IP Camera Manual www proctorsystems com roctor Security Systems Table of Content 1 Introduction lceeceseeeen e TETT 4 About this manual eee a TET a 4 Be e hh 0 SEE 4 Product and Accessories lt __ _ _ _ _ _ _ _ L 5 System Connections imm T 2 Installation AMBON O 9 3 System Operation T A L 11 Remote Video MonitadMditl 9 oeUUUUJ ee 11 Initializ
15. UE BRE WED JJJ THU BPR ru BRR SAT BREE 33 55 Megapixel IP Camera Manual www proctorsystems com Oproctor Security Systems Serial Port Conf guration Senal Port Information This camera supports one RS 485 serial port By default Pelco D protocol is used with 2400bps baudrate Sensor Type There is one sensor input port on Megapixel IP camera The sensor port can be conf gured to the following ee Open 0000 NO Normally Open The port is normally open and activated when closed NC Normally Closed he port is normally closed and activated when opened The function of the sensor port is set based on the type of the sensor connected Sensor Schedule Choose Sensor OFF or Sensor ON and click the below schedule cells to make Sensor Schedule according to day of week and hour A Click desired Cell to set schedule 0o 1 2 3 4 s 6 7 8 9 1011 12 13 14 15 16 17 1819202192 23 SUN IBN GA DE S CR WA d LU E t E m KA TENH Tonos parli pU Pc a Sq Eos en TUE MIU a wen BA MAA EA A AA YEH MAN A PA AA Ka KA BA YA NAN YAA NA PA KA AN PAN YE THU MAU E t t Te EE ER ELE Rs FR BENE E ii BAKA E A EN e E Reese SAT RR E E DR RE ODE EO KA 8 NAN TAA RR ES D EOD 8 E KAN UR MA A Click desired Time Line or Date Line to set schedule Jo m RR GGG MON MM EHE GE 34 55 Megapixel IP Camera Manual www proctorsystems com Security Systems Oproctor To s
16. a Connecting Sensor and Alarm Connect sensor and alarm devices to corresponding terminals accordingly Connecting Power After conf rming the power source connect power adaptor and connect the 12VDC connector to the IP camera Megapixel IP Camera Manual 9 55 www proctorsystems com Security Systems roctor Check if it Works Once the power is supplied to the IP camera it will start booting The IP camera will boot up to an operating mode after approximately 40 60 seconds The green LED on the Ethernet port will f ash indicating the IP camera is ready Software provided on the disc called True Manager allows you to check the IP address and other network details of the IP camera Please refer to the True Manager manual for instructions on how to f nd the IP address of the IP camera and if required changing it Megapixel IP Camera Manual 10 55 www proctorsystems com Oproctor Security Systems 3 System Operation Remote Video Monitoring There are two ways to monitor video when the center system and IP camera are connected In order for a proper operation an IP address must be set accordingly Please refer to True Manager Manual enclosed with product for further details Default ID admin Default Password 1234 Video Monitoring using Intemet Explorer Open Internet Explorer and enter camera s IP address The system will ask for conf rmation to install Active X control Once authorized the Internet Explorer w
17. able Disable Apply Edited Area Mode Set 9 Erase sensitivity D for most sensitive p T 5 A Sensitivity Sensitivity is the condition to trigger an event of motion detection The value determinesthe sensitivity of the motion detection within a block the smaller the more sensitive It is selectable from 0 to 10 Information Display System ID and or server time can be display over the video window in Internet Explorer Each item can be turn on or of separately and position also can be conf gured This information is displayed after the video is decompressed 23 55 Megapixel IP Camera Manual www proctorsystems com Oproctor Security Systems Burnin OSD Insert system ID and date time in the compressed video System ID and time respectively can be turned on or of in the video Position and Font size can be conf gured also System ID for Burnin OSD exists independently from normal System ID Note that size of Burnin OSD display varies according to the encoding resolution setting This is inevitable because Burnin OSD is inserted to the frames before encoding is performed The following table describesthe rule for Burnin OSD display 720x480 720x240 720x576 720x288 2 2 1 640x480 800x600 1024 x 768 1280x720 1280 x 960 1280x1024 1440x900 1600x900 1680x1050 1920x1056 1920x1080 2048x1536 2560x1600 2592x1936 2 Both System ID and Time are displayed Either System ID or Time
18. ation of IPSIS EBERT 14 4 Remote Config Uma ii aana o 15 Using Web s T GG 15 System CAN NA A CCL JG 16 Video 0 AN NG ena PG 20 Audi NON EEEE E EE 25 ON MH MH 26 OO DON O 33 COC CC __yz__ a AMEH 36 Pose COC 000 IQ ee _ 42 RECO COMMICUIEI ON NENNEN o oo eese ee 43 User Coml s eM PPE cc ANG 50 CM NUDO Ce 3 h 5F s si titi i Lr 52 Megapixel IP Camera Manual 3 55 www proctorsystems com Security Systems Oproctor 1 Introduction About this manual This user manual provides information on operating and managing the premium network camera The manual includes instructions of installation operation and conf guration of the system as well as how to make troubleshooting Features Megapixel IP camera is megapixel network based system with remote live monitoring audio monitoring and control via an IP network such as LAN ADSL VDSL and Wireless LAN Video Highly ef cient compression algorithm H 264 amp MJ PEG support Wide range of transmission rates 32kbps 10mbps Various transmission modes CBR VBR Motion detection Audio Multi transmission mode Simplex Megapixel IP camera a Client PC or Decoder Client PC or Decoder a Megapixel IP camera Full Duplex Network Fixed IP amp Dynamic IP DHCP support 1 1 1 N support Multicasting Auto
19. by network management systems to communicate with network elements SNMP lets TCP IP based network management clients use a TCP IP based internetwork to exchange information about the conf guration and status of nodes SNMP can also generate trap messages used to report signif cant TCP IP events asynchronously to interested clients For example a router could send a message if one of its redundant power supplies Multicast Multicast IP The Multicast menu is used for conf guring the multicast IP address to which media stream is delivered when a client such as a Decoder VMS or NVR software is connected in multicast mode The multicast IP address selection range is between 224 0 0 0 and 239 255 255 255 The selection can be used only when media protocol is set to Multicast 30 55 Megapixel IP Camera Manual www proctorsystems com Oproctor Security Systems DDNS Select the DDNS Dynamic DNS server to use One of the two servers can be selected True DNS TrueDNS service is used in this mode Systems can be registered on the website for TrueDNS service http nsl truecam net System will get a domain name of xxx truecam net style Please refer to user guide document for True DNS service DynDNS DynDNS service is used in this mode Refer www dyndns org for details ID Password and Domain name are needed when DynDNS is set Dynamic DNS isamethod protocol or network service that provides the capability for a netw
20. can be displayed When both are enabled System ID is displayed 0 No items are displayed This is because video area is too small to display OSD text in large text Output Format Output Format menu appears only when Enable Preview ison Select the output format for the monitor preview according to the video output and monitor specif cation 24 55 Megapixel IP Camera Manual www proctorsystems com roctor Security Systems Audio Conf guration setup Live View System Video Audio Network Senal Event Preset Record User Camera Audio Algorithm Algorithm G 711 AAC Bitrate 9 64kbps 128kbps Mode Mode Tx amp Rx v Input Gain cp xc Dm Ki Input Gain Algonthm Algorithm Select the audio algorithm G711 orAAC G 711 and AAC from client to server direction are supported Thus bidirectional audio communication is supported Bitrate Select the bitrate between 64Kbps and 128kbps when AAC is selected The sampling rate isf xed to 8KHz and 32KHz for G711 and AAC respectively Note that when camera is connected to a decoder the decoder s audio algorithm should be set identically to transmit audio properly Mode Select audio operation mode Tx Only Transmit only Transmit and Receive Input Gain Set audio input gain from Oto 31 25 55 Megapixel IP Camera Manual www proctorsystems com roctor Security Systems Network Conf guration Setup Live View System Video Audio
21. der systems video server can work as a video decoder which takes the data from a video server or IP camera decodes and outputs analog video Topology Generally IP camera and PC or a decoder is connected in 1 to 1 mode or 1 to many conf guration 1 1 Connection site Remote Center Decoder Remote Center 1 Site One camera is installed at a site where video images are transmitted A PC or a decoder is installed at a central location to receive and view the video images on an analog monitor Audio and serial data are transferred in either direction 1 N Connection Site Remote Center Megapixel IP Camera Manual 7 55 www proctorsystems com Oproctor Security Systems In this conf guration a site can be monitored from many remote central locations Maximum connections would be limited by network bandwidth connection Functionally the VMS Video Management System software provided can replace the decoder Multicast Mode If the network supports multicasting a large number of decoders can be used to receive video ef ectively from a camera using a single streaming of video and audio However multicast mode is possible only when network environment supports multicast Relay Site Center 1 Decoder Center 2 Decoder Video and audio data can be retransmitted from a center to another center The arrangement is useful when the network bandwidth to the site is limited while there are more than one center want
22. ent Type 3 Event Type 4 w S 5 0271 22 il z E ul Bi a E 43 55 Megapixel IP Camera Manual www proctorsystems com Oproctor Security Systems DISK SD memory can be used and at least 1GB size is recommended Either EXT3 or FAT32 f le system can be used A disk with either EXT3 or FAT32 f le system can be read in Linux PC However only disk with FAT32 f le system can be read in Windows PC Less than 4Mbps of video bit rate is recommended when you record and monitor video simultaneously since frame dropping may happen due to performance limitation Disk information Be sure to restart the system after connecting an SD card During booting the system reads status of disk and initializes it Once the initialization of a disk isf nished the status of disk is shown on Record page of web based setup setup Live View System Video Audio Network Serial Event Preset Record User Camera Record app Search age lWetinting and Recovering Dak Disk size 3 73 G ee space Unkpo Refer to the chart for checking the status of disk ee REN Nod Disk is not connected to the system Searching Disk information Checking the status of disk Refresh the page and wait until the status is changed Mounting and Performing recovery process when disk damage isfound Recovering Disk It takes from seconds to minutesfor recovering Disk format needed Disk is attached but the type of the f le system is unkn
23. er is conf gured on Event page Itisvalid only when Use Record issetto Use Disk Erase After Backup Data are deleted in the disk automatically after being uploaded to the FTP server It is valid only when Automatically Backup to FTP is used Start Time of Backup Data Specify the time of the data in the disk from which Backup to FTP Disk is performed This time is changed automatically as the backup to FTP server goes So it is useful to check current backup status It is valid only when Automatically Backup to FTP is used 45 55 Megapixel IP Camera Manual www proctorsystems com Oproctor Security Systems FTP Base Directory Specify the name of the directory to be created in the FTP server It is valid only when Use Record isset to Use FTP Event Type Three recording modes are supported Continuous Event Disconnect In case of Event recording event types can be selected among several events Selected event type is used for conf guring the schedule table Up to 4 event types can be conf gured and each event type can be a combination of sensor video loss and motion event Pre event Time Specify the duration of recording before an event happens Post event Time Specify the duration after the event is cleared Schedule Table Actual recording mode is determined by Schedule Table where recording mode conf gured by day of a week and hour Each of recording mode conf gures the recording operation
24. ere traf cfrom client to server is not generated at all RTP Real Time Transport Protoco is an Internet protocol used for transmitting single real time multimedia data such as audio and video to a select group of connected clients Normally RTSP uses RIP to format packets of multimedia content RIP menu is used when the RTP only streaming without RTSP connection RTP stream will be transmitted to the destination set The SDP Session Description Protocol f le can be found in the server and a client can retrieve it using http connection Related settings are as follows Destination IP Setthe IP Address of the destination system which will receive RTP stream If the system is decoder RTSP authentication information can be entered in the middle of RTSP URL as follows rtsp admin 1234 9192 168 10 100 554 video1 Destination Port Setthe Port of the destination system which will receive RTP stream UserName Enter the User name that will be used as session name in the SDP f le File Name Enter the f le name that will be used as the name of the SDP f le Then it can be accessed through http ServerAddress f lename Mode RIP Destination IP 492 168 10 14 Destination Port 1026 0 102665534 Even number only User Name Office File Name ch sdp 29 55 Megapixel IP Camera Manual www proctorsystems com Oproctor Security Systems MPEG TS isastandard format for transmission and storage of audio
25. et all cells in the schedule click below Empty Cell EE j 213 415 f SUN BERR VON BRR 35 55 Megapixel IP Camera Manual www proctorsystems com roctor Security Systems Event Conf guration setup System Video Audio Network Serial Event Event Local sensor Alarm E mail LIFTP On Video Loss Aarm E mail LIFTP On Motion Alarm E mail LIFTP Hemote Sensor Alarm LlE mail LIFTP Sensor2 Alam E mail LIFTP Sensor L Alarm E mail LIFTP sensor Alam E mail FTP On Disconnect On Disconnect Aarm E mail LIFTP Duration Alarm tsec M E mail Motification Preset Record User D No Preset i No Preset E C No Presei C No Presei wj C No Preset wj L No Preset wj Server Address Port 25 25 465 1025 65535 Authentication on SMTP Gor Oon server o SSL 9 Disable Enable Video Clip Attaching 9 Off Primary Video Secondary Video JPEG Capture Number of Frame a o o 1 10 Server Address D Port 21 21 1025 65535 FTP Filename sd FTF Base Directory rl Upload Video Primary Video Secondary Video JPEG Capture Number of Frame a I 10 FIP Upload Continuous Upload of Con Upload Duration sec Max 300 Upload Interval 300 Megapixel IP Camera Manual www proctorsystems com sec Max 3600 Live View Camera 36 55 Oproctor Security Systems When a decoder instead of a PC client is connected to an IP
26. et switched variable latency data networks It is designed particularly to resist the ef ects of variable latency by using a jitter buf er Reboot Reboot the camera Do not press the Reboot button unless the server needs a reboot Factory Reset All settings including user accounts and logs are cleared Factory Reset except network settings All the settings except for current network settings are changed to default values 19 55 Megapixel IP Camera Manual www proctorsystems com proctor Security Systems Video Conf guration Setup Live View System Video Audio Network Seral Event Preset Record User Camera Video Encode Enable Preview Off 9 On Framerate 30 Preference CBR v Quality Bitrate 2000 kbps 32 10240 z 30 I Frame Interval a H 264 Profile High Profile v Dual Encode Use Dual Encode of 9 On Dual Encode Algorithm H 264 O MJPEG Resolution 720x480 v Framerate 30 v Preference VBR v Quality Economy v Bitrate kbps 32 2048 30 Frame Interval H 264 Profile High Profile v Motion Detection Use Motion Detection of 9 On Edit O Enable 9 Disable Mode Set Erase Sensitivity 0 for most sensitive bai 5 Information Display SystemID off O On Time 9 of On Position 9 Bottom O Top Burnin OSD SystemID of On Time 9 Off O On Position 9
27. f les Port Specify a port for FTP operation Port 21 is the default port in FTP operation If a dif erent port is conf gured in the FTP server this port needsto be changed accordingly ID amp password Enter ID and Password for accessing the FTP server FTP File name The names of fles upload by FTP can be specif ed by user If a f xed name is specif ed the fle is overwritten repeatedly Max length of af le name is 60 characters If the name is left blank f le name is determined according to the internal rule implemented in the f rmware Thefollowing macros are supported to form variable parts of f le names The strings are case sensitive JoY YYY year 99MM month DD day ohh hour 9omm minute SS second JoEVENT event type Sensor1 Motion ADDR address of the server Domain name when DDNS is used Otherwise IPaddress avi or jpg will be added automatically at the end of the f lename depending on the type of video f le FTP Base Directory Specify the name of the directory to be created in the FTP server It is valid only when Use Record isset to Use FTP on Record session Upload video Primary Video and Secondary Video H 264 only JPEG Capture can be selected for uploading The duration of video clip can be conf gured with Pre Event Time and Post Event Time in Event Record section 40 55 Megapixel IP Camera Manual www proctorsystems com Security Systems Op
28. g data will be shown as follows search Page 2008 03 03 i 1 ted Enn 2 First choose the date for search and the list of AVI f les will be shown 3 Theflename showsthe date and time Date Begin Time End Time avi E Root gt gt 2008 03 03 C File Name Size E DADAN 155722 1557 31 a 1 30 M DS0303 155355 165606 avi 22 51 M DS0303 155143 155213 av 4 48 M 4 Press Root to move backto the page with date list 41 155 Megapixel IP Camera Manual www proctorsystems com Oproctor Security Systems Playback 1 Selecting an AVI f le will show a dialog for opening or saving thef le Do you want to open or save this file Mame 080303 165143 165213 avi HB Type Video Clip 3 27MB harm your computer If you do not trust the source do not open or While files from the Intemet can be useful some files can potentially save this file What s the risk 2 Pressing Seve button the fle will be stored in the PC The AVI f le can be played with Windows Media Player 3 Ifyou press Open in thedialog thef le will be downloaded and played automatically with Media Player 4 Another connection through web is disabled during downloading and it is also not allowed to download two AVI f les at the same time 48 55 Megapixel IP Camera Manual www proctorsystems com Oproctor Security Systems Deletion of data 1 If you want to delete recorded f les select the f les by checking the i
29. h mm ss Time Zone GMT 12 00 International Date Line West gt E Automatically synchronize with MTP server NTP Server Name noo Reboot Factory Reset Factory Reset Factory Reset except network settings 16 55 Megapixel IP Camera Manual www proctorsystems com Oproctor Security Systems General System ID Enter System ID that is used as a camera title The set System ID is displayed with video image on Web browser The System ID is also transferred to remote software such as VMS and displayed on it Language Select the language to be used for web based conf guration Firmware Ee Se qu ox Firmware version Display the current f rmware version Board ID Display the Network board ID of the camera recognized by system Upgrade Upgrade f rmware Press Browse button to select af rmwaref le from PC Press Firmware Upgrade button to start to upgrade Messages for showing status downloading upgrading will be displayed The camera will reboot automatically after completing upgrade Do not tum the camera of during upgrading Firmware Version Enc V1 102D 001 Board ID 47 Now Downloading Please wait Upgrade D cckskim update_fwihvsSys102C_ Browse Now Upgrading Please wait a minute 17 55 Megapixel IP Camera Manual www proctorsystems com Oproctor Security Systems Conf g Backup amp Restore Backup All the setting of conf guration can
30. ill start to display video images from camera as shown below Default IP Address http 192 168 10 100 Live View Setup Video Select 9 Primary Secondary View Size 9 50 O 100 Digital Zoom Select Preset wi Sensor input Q Alarm output Q Snapshot Talk of O On File Record Folde Filename Display Buffer Ls 1 Le LL 11 55 Megapixel IP Camera Manual www proctorsystems com Oproctor Security Systems Video Select Select the Video stream to be viewed Primary or Secondary This camera is capable of dual streaming primary streaming and secondary streaming Video will be displayed according to the resolution set on video conf guration If dual streaming Use Dual Encode Menu in Video page is not activated secondary video is not available View Size Adjust the Screen size Screen size is initially adjusted according to the compression resolution If you click 50 icon the whole screen size will be reduced to half size Digital Zoom Control the Digital zoom on the screen Digital Zoom The more the camera zooms in the smaller the square of control panel is Position of the F o 4 image can be changed by moving position of the square If you press x1 the screen will return to the normal size PTZ Control Optical Zoom amp Digital zoom built in the camera Control PTZ and PTZ Control Panel is used for controlling external PTZ devices when the PTZ
31. ions This prof le includes all features that are supported in the Constrained Baseline Prof le plus three additional features that can be used for loss robustness or for other purposes such as low delay multi point video stream compositing Dual Encode Use Dual Encode 1 Select Of button onthe Enable Preview to enable to use Dual Encode 2 Select ON to enable to use Dual Encoding The secondary video can be viewed on Live View window by selecting Secondary on Video selection Dual Encode Algorithm Select H 264 or MJ PEG for the secondary streaming In case of H 264 either Bitrate mode or Quality mode can be selected for Preference mode in On the other hand MJ PEG supports Quality mode only 22 55 Megapixel IP Camera Manual www proctorsystems com Oproctor Security Systems Motion Detection Use Motion Detection Determineto use Motion Detection function Motion Detection Area Editing Conf gure regions for motion detection Regions of arbitrary shape can be conf gured by the following steps M Select Enable on Edit tab M Select editing Mode Set isforincluding cells to motion detection region and Erase isfor excluding X Select cells using the right button of the mouse Multiple cells can be selected conveniently by press and dragging M Press ApplyEdited Area to savethe editing Motion Detection Use Motion Detection Off 9 On mr 1a Mam a a i A T A Seo it Enable Disabl Edit En
32. ity are available Quality mode VBR encoding tries to encode every frame in a constant quality Therefore resulting bitrate may vary alot depending on the complexity or activity changes in the input video It is preferred when constant video quality is required and network bandwidth is enough for delivering the stream of highly varying bitrate Bit rate Determine bitrate value between 32 10240kbps Bitrate mode CBR encoding allows you to set af xed target bitrate that consumes a predictable amount of bandwidth In order to keep the bitrate limit video quality is controlled dynamically according to the complexity or activity changes in the input video I Frame Interval Determine I frame Interval between 1 and 255 21 55 Megapixel IP Camera Manual www proctorsystems com jproctar Security Systems H 264 Profle Select H 264 Profle HighProfle or Baseline Profle The standard def nes various sets of capabilities which are referred to as prof les targeting specif c classes of applications High Prof le HiP The primary prof le for broadcast and disc storage applications particularly for high def nition television applications for example this is the prof le adopted by the Blu ray Disc storage format and the DVB HDTV broadcast service Baseline Prof le BP Primarily for low cost applications that require additional data loss robustness this prof le is used in some videoconferencing and mobile applicat
33. lenecked Suppression Mode X Encoding bitrate and frame rate are adjusted not to drop any frames when the network bandwidths to some clients are limited In this case all clients can be af ected by the averaged bitrate and frame rate 31 55 Megapixel IP Camera Manual www proctorsystems com roctor Security Systems Address Information Followed network information is displayed Read only IP Address The Camera own IP address This information is useful when the camera s IP mode is set to DHCP Domain Name In case the camera is registered at DDNS server the registered domain name is displayed MACAddress Display the MAC address of the camera In case the camera is registered at DDNS server the MAC address is used in DDNS registration Connecting Client IPAddressesthat are currently connected to system are listed 1 Indicates 32 55 Megapixel IP Camera Manual www proctorsystems com Oproctor Security Systems Serial Conf guration setup Live View System Video Audio Network Senal Event Preset Record User Camera Serial Apply COM 2 RS 465 Fort Protocol Bitrate 2400bps v Data Bit 8Bits d Parity None nj Stop Bit 1Bits vi PTZ PTZ Type Pelco D v PTZ ID 1 PTZ Port sensor Type Sensor 1 Q or NO ONC sensor schedule Select 9 Sensor Of Q Sensor On Sensor 1 0 112 3 4 5 5 71 8 9 10 112113 14 15 16 17 18 19 20121 22 23 EE pellicles LA JG ou 11111111 M i E E JA T
34. matic transmit rate control according to network conditions OnVIF PSIA compliant Serial Data RS 485 support Data pass through mode Serial data communication between IP camera and decoder Sensor and Alarm Support direct connections of external sensor and alarm devices Event Alarm Megapixel IP Camera Manual 4 55 www proctorsystems com Security Systems Oproctor User Interface Diagnose and upgrade through dedicated program called True Manager System conf guration using Internet Explorer High Reliability Reliable embedded system System recovery by dual watch dog functions Product and Accessones Oproctor Megapixel IP Dome Camera 1 3MP 2 0MP 3 0MP User Manual ver2 0 3 Megapixel IP Camera Manual www proctorsystems com Megapixel IP Quick Manual Dome Camera Megapixel IP Camera Manual www proctorsystems com SW and User Manual CD 5 55 Oproctor Security Systems Part Names and Functions Rear View Connector Function 1 Ethernet 802 3af Ethernet port 802 3af LED BE a 8 Composite Out Composite Out 9 SD CARD SD memory card slot Megapixel IP Camera Manual 6 55 www proctorsystems com Oproctor Security Systems System Connections IP camera can be connected in either 1 to 1 connection where one camera Is connected to one PC client ora decoder system or 1 to many connections where one system can be connected to several PCs and deco
35. ms com Oproctor Security Systems AE Target The AE target can be adjusted in the range 0 40 Lower value mean darker image This is used on AE mode AEMAX The AE MAX can be adjusted in the range 0 45 AEMIN The AE MIN can be adjusted in the range 0 35 The changes of image become insensitive if the value is lower and sensitive if the value is larger in case of these both AE MAX and AE MIN True Day amp Ni Megapixel IP camera use IR f Iter for image quality IR f Iter is on during day and of during night TDN Mode Threshold TDN is controlled by day amp night threshold value Auto TDN is controlled by internal value Day TDN is made on day mode forcibly Night TDN is made on night mode forcibly DayThreshold The Day Threshold canbe adjusted in the range 0 40 TDN is recognised as day and turn on IR Filter when brightness is bigger than the value NghtThreshold The Night Threshold can be adjusted in the range 0 20 TDN is recognised as Night and turn on IR Filter when brightness is lower than the value NoiseFilter Mode The Noise Filter Mode interworks with TDN The noise f Iter mode is on during night and of during day On Noisef Iter is on always Of Noisef Iterisof always Grey Mode The Grey Mode interworks with TDN The grey f Iter mode is on during night and the color is If TDN decide on night then image remove color grey image Image add color color image when TDN decide on day
36. orked device such as a router or computer system using the Internet Protocol Suite to notify a domain name server to change in real time ad hoc the active DNS conf guration of its conf gured hostnames addresses or other information stored in DNS Vdyn Vdyn is a DDNS service provided by Visionica http visionica com No further conf guration is required for using this service It internally uses MAC address for the registration When it succeeds the domain name of the form 001C63A607EC visionica info is displayed on CurrentDomain entry of Network page E mail setting is not mandatory Check IP Disable If Check IP Disable is selected it will skip to check its own IP In Fixed IP mode the set IP will be registered on DDNS server In DHCP mode dynamically assigned IP will be registered on DDNS server Normally Check IP Disable should be unchecked in order to obtain public IP in the network Bitrate control When there are more than one client connected to the camera due to bandwidth dif erence among the clients some of them do not have enough bandwidth to receive encoded stream completely In this case it is possible to select the way to stream video to clients as following Frame Drop Mode Encoding is performed strictly according to video settings When a client is connected through a network with less bandwidth it may not receive all the frames That is frames are dropped on sending module if the network is bott
37. own or damaged Unknown disk type detected USB Disk available Available to be used for recording Disk removed Disk is detached during operation or there is damage on or in abnormal state thef le system If it happens while disk is connected it is recommended to format the disk 44 55 Megapixel IP Camera Manual www proctorsystems com Security Systems Oproctor General Use record Of Recording function will not be used when Of isselected Use Disk Recording will be enabled and data will be written to a disk Use FTP Recording will be enabled and data will be uploaded to an FTP server In this mode FTP upload by event is automatically disabled Select Video Select video stream to record Manual Record When ON is selected record is operated regardless of schedule Overwrite When the disk becomes full the oldest data are deleted automatically It is valid only when Use Record isset to Use Disk Max File Size Max File Length Max File Size option is for limiting the size of AVI f le If small f le size is set f les of small size will be generated but numbers of the fles will be increased Max File Length option is for limiting the time length of AVI f le If the size of afle becomes MaxFileSize or the duration of the recording reaches Max File Length a new f le is created Automatically Backup to FTP Data recorded in the disk can be uploaded to an FTP server automatically for backup FTP serv
38. privilege forf le deletion 41 55 Megapixel IP Camera Manual www proctorsystems com Oproctor Security Systems Preset Conf guration setup Live View System Video Audio Network Senal Event Preset Record User Camera Preset Select Preset V Edit Label Select Preset First Preset Select preset and insert the name of preset Set camera position forthe preset and press Savelist button 42 55 Megapixel IP Camera Manual www proctorsystems com Oproctor Security Systems Record Conf guration setup Live View System Video Audio Network Serial Event Preset Record User Camera Record Search Page Disk Information No disk Disk size Free space General Use Record Of 9 Use Disk O Use FTP Select Video 9 Primary Video Secondary Video Manual Record 9 of On Overwrite of On Max File Size 100M bytes Max File Length 10 Minutes Automatically Backup to FTP of 9 On Erase after Backup 9 of On start Time of Backup Data 0000 01 00 0 00 00 Event Type Event Type 1 Sensori 1Sensor2 Motion L Video Loss Event Type 2 Sensori L 1Sensor2 L Motion D Video Loss Event Type 3 Sensori L Sensor Ll Motion L Video Loss Event Type 4 Sensori LJ Sensor U Motion D Video Loss Pre event Time None w Post event Time Mone schedule Table Record OF Continuous Disconnect Select Event Type 1 Event Type 2 Ev
39. remote clients In order for camera and remote systems decoder or VMS NVR software to be connected the port number must be identically conf gured in camera side and client side HTIPPort 80 1025 65535 Enter HTTP port used for web based connection HPS Port 443 1025 65535 Enter HTTPS port used for secured HTTP connection RTSP Port 554 1025 65535 Enter RTSP port used for RTSP based connection The default RTSP port is 554 RTSP Real Time Streaming Protocol is a standard for media streaming between server and client Discovery UPNP By setting UPNP to ON it allows the discovery by the client according to UPNP Universal Plug and Play protocol Zeroconf By setting Zeroconf to ON it allows the discovery by the client according to Zeroconf protocol WSDiscovery Discovery function based on web service is enabled It allows the discovery by Client SW which is supporting Onvif Authentication RTSP Authentication If RTSPAuthentication setto ON user in the client side is asked to enter User ID and Password HTTPAPI Authentication When HTTP API authentication setto ON HTTP Authentication is asked for all clients which use HTTP API 28 55 Megapixel IP Camera Manual www proctorsystems com Oproctor Security Systems One way Streamin This IP camera provides two kinds of one way unidirectional streaming based on UDP to clients RTP and MPEG TS Both are a kind of broadcasting wh
40. roctor Numberof Frame Enter frame number of J PEG Capture from 1 to 10 Continuous Upload Continuous upload On allows video clips to be transmitted regularly regardless of occurrence of events When this mode is turned on FTP upload by events is suppressed Upload Duration Specify recording duration of a video clip to be transmitted Max 300 sec Upload Interval Specify transmission interval Max 3600 sec Upload Duration is not included in Upload interval For example if Upload interval is 60 seconds and Upload duration is 20seconds a video clip for 20seconds istransmitted every 80 seconds FTP Test FTP upload function can be tested with this button Please note that conf gured settings should be saved f rst by pressing Apply button before using FTP Test function One of the following messages will come as a result of the test FTP connection tested The connection to the FTP server is successful successfully Failed to connect FTP The connection to the FTP server failed It is necessary to check if server the server is reachable and server address and port are correct mee The server is reachable but authentication failed ID and or Authentication failed password need to be checked FA NG File upload failed The user of the ID is not allowed for writing into P the directory or FTP server can be full Failed to delete the test f le The user of the ID doesn t havethe Failed to erase f le
41. s ModifyPassword button The following window will appear setup Live View System Video Audio Network Senal Event Preset Record User Camera Modify Password ID admin Current Password New Password Confirm Password Enter the current password and then set a new password Modify Privilege Level Press Modify Privilege button to change User level It is not allowed to change the privilege level of admin user setup Live View System Video Audio Network Serial Event Preset Record User Camera Modify Privilege Level ID chris Privilege Level Manager v Vodiy Login Policy Authentication Type HTTP authentication based on RFC 2617 HTTP Authentication Basic and Digest Access Authentication Is supported Skip Login provides for convenient access to the server when authentication is not required When Skip Login is set to Enable login step is skipped The privilege level after login in this way is determined by the setting of Privilege Level After Login Slapped 51 55 Megapixel IP Camera Manual www proctorsystems com Security Systems Oproctor Camera Conf guration setup Live View System Video Audio Network Senal Event Preset Record User Camera Camera Flip Horizontal Flip of On Vertical Flip of On AEWB Auto Exposure amp Auto White Balance AEWB Mode AEWB AE Mode Auto True Day amp Night and Filter TDN Mode Threshold Current Value 184 Night gt Day Threshold Ap Def 40
42. tem in front of each f le and press Delete button Root gt gt 2008 03 03 E File Name Size 1 080303 155722 165731 ati 1 30 M Ej 080303 155355 165608 avi 22 51 M In 080303 165143 165213 avi 4 48 M 2 Itispossible to delete multiple f les at once 49 55 Megapixel IP Camera Manual www proctorsystems com Security Systems Oproctor User Conf guration Setup Live View System Video Audio Network Serial Event Preset Record User Camera User User List ID Privilege Level admin Admin O Modify Password Modify Privilege Login Policy Skip Login Disable Enable Privilege Level After Login Skipped User List User can be registered and privilege level of a user can be specif ed User conf guration is allowed only to admin user Max 16 users can be registered and each user can have one of four privileges All operations User ID admin Live viewing and PTZ control All operations except for user Manager conf guration Add User Press Add button Thefollowing window will appear Setup Live View System Video Audio Network Senal Event Preset Record User Camera Add User ID Door Password III Privilege Level Manager Enter User ID and password Up to 15 characters and select Privilege Level 50 55 Megapixel IP Camera Manual www proctorsystems com Oproctor Security Systems Delete User Select the User to be deleted and press Delete button Change Password Pres
43. to monitor the site VMS Video Management System Site Remote Center 1 Site Remote Center Decoder 3 7 11 VMS Video Management System is a Window based remote monitoring program in order to monitor or control video audio and events in real time from several IP cameras or video servers Please refer to the VMS User Manual for more in detail Megapixel IP Camera Manual 8 55 www proctorsystems com Oproctor Security Systems 2 Installation Connecting Network LAN Connect the power adaptor to IP camera Connect network cable to ethernet port To display video through composite port after connecting each port to a monitor set preview option ON on the web viewer page Connecting Audio Audio is full duplex It is possible to set the mode as Tx only Rx only or Tx Rx Connect audio input and output ports to audio devices accordingly The Audio signal required is line level so audio equipment with an amp mixer or other amplif er should be used Connecting Serial Ports RS 485 of IP camera can be connected to external equipment such as PT receiver etc PC client can send PT commandsto the external equipment via the serial port When a decoder system instead of PC client is connected to IP camera the serial port and that of the decoder system works in pass through mode That is data from one port is delivered to the other port vice vers
44. video and data 7 and is used in broadcast systems such as DVB and ATSC Transport Stream is specif ed in MPEG 2 Part 1 Systems formally known as ISO IEC standard 13818 1 or ITU T Rec H 222 0 Transport stream specif esa container format encapsulating packetized elementary streams with error correction and stream synchronization features for maintaining transmission integrity when the signal is degraded As MPEG TS itself supports only AAC as the audio algorithm only video is streamed when audio algorithm is set to G711 Related settings are as follows Destination IP Setthe IP Address of the destination system which will receive MPEG TS stream Destination Port Setthe Port of the destination system which will receive M PEG TS stream Mode MPEG TS vj Destination IP 192 168 10 14 Destination Port 1026 0 10256 65534 Even number only SNMP Setup for using SNMP Simple Network Management Protocol It is compatible to both SNMPv1 and SNMPvec Settings for using SNMP Simple Network Management Protocol are as following SNMP Listen Port 0 161 1025 65535 The port is for connecting external devices when system operates as a SNMP client SNMP is not used by setting 0 value SNMP Trap Destination IP Setthe SNMP Trap Destination IP SNMP Trap Destination Port 0 162 1025 65535 Set the SNMP Trap Destination Port SNMP is not used by setting 0 value Simple Network Management Protocol SNMP is used
Download Pdf Manuals
Related Search