Aquatec OceanVIP User Manual ()
Contents
1. 6 8 Folding the footrests Position for getting in and out 1 Push the footrest slightly upwards along the guide until the groove 2 fig 6 no longer catches the pin of the clip 7 fig 6 2 Fold the footrest to the side Driving position CAUTION Loose footrests can be dangerous Fix the footrests in the driving position 1 Turn the footrests inwards 2 Push down the footrest until the groove 2 fig 6 catches the pin of the clip 7 fig 6 6 9 Swivelling the seat frame with backrest Ce Important Only use the removable handle and only swivel the seat frame with backrest if a user is sitting on the commode On swiveling the seat frame with backrest pull the backrest backwards or forwards us ing the handle Never reach into the area between the seat frame with backrest and the front tubular frame between the side sections when swivelling Do not drive when the seat frame of the backrest is swivelled The seat frame can be tilted approx 35 backwards to gether with the backrest 1 Pull the removable handle 4 fig 11 and hold it in this position The distributor 3 fig 11 is used to release the blocking of the pneumatic springs 2 fig 11 2 Press the seat frame 1 fig 11 at the handle of the backrest 5 fig 11 backwards or forwards to gether with the backrest The pneumatic springs 2 fig 11 are extended fig 11 or retracted 3 Release the removable handl2. plate must rest entirely on the handle of the backrest 4 Push the grab handle 3 fig 7 from above into the recesses of the bracket 5 Use the star handle to tighten the screw 6 fig 7 until the grab handle is fixed 6 Push the pad 10 fig 7 and the pad holder 2 fig 7 into the holder on the grab handle 8 fig 7 7 Use the star handle to tighten the upper screw 1 fig 7 until the pad holder is fixed 6 Operation 6 1 Adjusting the seat height Ce Important e The seat height must be adjusted to suit the user As a rule the seat height is correctly adjusted when the user is sitting on the commode and both feet touch the ground The seat height must be adjusted on both sides simultaneously To make adjust ments a second person is required to help Do not adjust the seat height of the com mode when someone is sitting on it 1 Slightly raise the commode at the seat frame 2 Take out both clips 5 fig 8 3 To adjust the seat height pull the seat frame out of the side section 1 fig 8 or push it in 4 Align the clip recesses 3 fig 8 at the side sec tion with a hole on the seat frame 4 fig 8 5 Push both clips from the outside into the side sec tion until the two lugs 6 fig 8 enclose the seat frame tube 2 fig 8 6 2 Adjusting the height of the footrests 1 Pull up the footrest 1 fig 6 slightly 2 Pull out the clip 7 fig 6 and put it in again at the
3. we refer to figures and individual items within the figures These references are shown in brackets Example 3 fig 2 refers to figure 2 item 3 Keep all documents supplied in a safe place 1 2 Proper use The commode is to be used solely as an aid for show ering or bathing going to the toilet or for transfer in doors Any other use is prohibited Do not use the commode outdoors or as a climbing aid The commode can be used as a commode for stand ard toilets or with an optional sanitary pan 1 3 Warranty The warranty depends on the legal specifications in the country of destination or on the specifications made by our sales partners In the event of damage please notify your specialist dealer or contact one of the addresses printed in these operating instructions The warranty period begins at the delivery date as shown on the delivery note 1 4 Re use Reconditioning The product is designed for repeated use The maxi mum number of times you can re use the product de pends on its general state and condition On reconditioning always follow the AQUATEC recon ditioning and hygiene instructions These are available on request from AQUATEC 1 5 Disposal Ce Important The product does not contain any hazardous substances Always dispose of the individual parts at your local fa cility according to the material identification labels on the parts Proper and complete disposal can be carried out
4. by the manufacturer 1 6 CE marking The product complies with EU Directive 93 42 EEC for medical equipment 2 Safety instructions 2 1 Warnings and symbols The following warnings and symbols are used in these operating instructions CAUTION This notice indicates a potential hazard Not following these instructions can re sult in injury or damage Ce Important This symbol indicates additional instructions information or tips 2 2 General instructions Lock the brakes in the parked position flat surfaces Only use the commode indoors and on even a mn If you detect any malfunction please contact your authorised dealer immediately Do not modify or reconstruct the device Never carry out work on the pneumatic E springs Please contact your authorised dealer immediately if a pneumatic spring is damaged or faulty Observe the information on the label Do not eg overload the commode In the text a picture illustrating the type of risk re places the asterisk CEN AQUA TEC 3 Description 3 1 Scope of delivery The AQUATEC OCEAN VIP is supplied with the fol lowing parts fig 2 Head support Backrest with cover and armrests Operating instructions in plastic bag Screws 4 x for backrest Cable ties 2 x Allen key Clips 2 x for footrests in plastic bag Footrests with heel loops 2 x Seat frame with seat plate and side sections with casters Clips 2 x
5. particolar modo a quelle relative alla sicu rezza e procedere di conseguenza e jIMPORTANTE Por favor lea este manual de instrucciones atentamente antes de utilizar el producto Tenga en cuenta todas las indicaciones especialmente las relativas a la seguri dad y sigalas OBSERVERA Las igenom bruksanvisningen noggrant innan produk ten anv nds Beakta och f lj alla anvisningar synner het sakerhetsanvisningarna TARKEAA Lukekaa tama k ytt ohje huolellisesti ennen kuin k yt tte tuotetta Noudattakaa kaikkia ohjeita erityisesti turvaohjeita ja toimikaa niiden mukaisesti e VIKTIG Les bruksanvisningen n ye f r du tar i bruk produktet F lg alle henvisningene spesielt ang sikkerhet VIGTIGT L s denne betjeningsvejledning opm rksomt igen nem f r du anvender produktet L g m rke til alle henvisninger is r sikkernedshenvisningerne og over hold dem Aem neet 10 OCEAN VIP D 88316 Isny C AS 150kg 4 028698 0771 D 005 zone 2007 SN 51 5 010 00100003 Ste AQT00374 AQT00342 AQUA TEC Contents 1 General instructions 10 1 1 Introduction onnan aana aaa aaa 10 1 2 Proper TEE 10 1 3 Waran EEN 10 1 4 Re use Reconditioning 10 1 5 Beet WEE 10 1 6 CE marking 00 e eee eee 11 2 Safety instructions 11 2 1 Warnings and symbols 11 2 2 General instructions 11 3 Description
6. the armrest holder 4 fig 9 with the armrest and move upwards Ce Important The small hole is for fixing the fastening clamp 7 Insert the screws into the armrest holder and guide into the holes in the backrest frame 8 Replace the nuts in the fastening clamp if neces sary 9 Place the fastening clamp onto the backrest frame so that the fixing of the fastening clamp engages with the small hole 10 Insert the screws into the nuts and tighten 11 Guide the belt of the backrest cover around the back rest frame close it and then tighten all the belts Follow the same procedure to adjust the armrests to the lower position Ce Important Open the belt below the armrest and feed it through the backrest frame if you are adjusting the armrest to the lower position 13 AQUA TEC 6 5 Adjusting the backrest cover E Important The lower seam 5 fig 10 of the backrest cover must always be below the distance piece 6 fig 10 of the backrest frame 4 fig 10 To attach accessories the second belt lock can be opened from above and the back rest cover can be passed by the backrest frame on the inside at this point 3 fig 10 e At least three belts must always be passed by the backrest frame on the outside and their belt locks must be closed The backrest tension can be individually adjusted Tensioning Tighten the belts 1 fig 10 of the backrest cover Loosening 1 Open the bel
7. 2 7 Fix the wire To do this place a cable tie 5 fig 2 or 2 fig 5 around the tubular frame 1 fig 5 and the wire 3 fig 5 on the left and right side of the lower curve of the backrest frame and tighten 8 Shorten the projecting ends of the cable ties 5 1 4 Fitting the footrests Ce Important The assembly procedure is the same for the right and the left footrests Push the footrest 1 fig 6 and the footplate 4 fig 6 inwards into the guide 8 fig 6 on the seat frame 9 fig 6 until the groove 2 fig 6 catches the pin on the clip 7 fig 6 The footrests can no longer be turned to the sides 5 1 5 Fitting the headrests Ce Important To adapt it to the user the grab handle can be fitted with the curve facing the front or the back The headrest pad 10 fig 7 can be re moved and replaced by other pad shapes optional To remove it loosen the retain ing bolts 9 fig 7 1 Use the star handle to insert the screw 6 fig 7 a little into the bracket 7 fig 7 2 Push the bracket with the screw onto the handle of the backrest 5 fig 7 from behind in such a way that the screw engages in the hole of the backrest s handle 3 Insert the plate 4 fig 7 into the bracket from the front in such a way that both lugs of the plate face down and up and the curved plate side touches the handle of the backrest Ce Important On inserting the retainer the curved side of the
8. Dusch und Toilettenrollstuhl Gebrauchsanweisung cy Commode Operating Instructions Chaise roulante pour douche toilettes Mode d emploi Qt Douche en toiletrolstoel Gebruiksaanwijzing a Carrozzina da doccia e da toi lette Istruzioni per l uso AQUATEC OCEAN VIP Silla de ducha y WC Manual de instrucciones Gv Dusch och toalettstol Bruksanvisning K Suihku ja wce pyoratuoli K ytt ohje Dusj og toalettstol Bruksanvisning Bruse og toiletk restol Betjeningsvejledning AQT00301 WICHTIG Bitte lesen Sie diese Gebrauchsanweisung aufmerk sam durch bevor Sie das Produkt benutzen Beachten Sie alle Hinweise insbesondere die Sicherheitshinwei se und handeln Sie danach IMPORTANT Before you use the product please read these opera ting instructions carefully Pay attention to all instruc tions especially those regarding safety and follow them at all times IMPORTANT Veuillez lire attentivement ce mode d emploi avant d uti liser le produit Veuillez respecter toutes les consignes notamment les consignes de s curit et agir en cons quence BELANGRIJK Lees deze gebruiksaanwijzing aandachtig door voordat u het product gebruikt Neem alle instructies in acht vooral de veiligheidsinstructies en volg deze op IMPORTANTE Si prega di leggere attentamente queste istruzioni per luso prima di utilizzare il prodotto Attenersi a tutte le in dicazioni in
9. MER 11 3 1 Scope of delivery 11 3 2 Technical data 11 4 CHE Te Ve GEET 11 5 Setting UP enge cy re Sos ee ewe eds 11 5 1 Assembling the commode 11 5 1 1 Inserting and moving the clips 12 5 1 2 Fitting the backrest 12 5 1 3 Attaching the removable handle and cable nes 12 5 1 4 Fitting the footrests 12 5 1 5 Fitting the headrests 12 6 Operation 0002 cece eee 13 6 1 Adjusting the seat height 13 6 2 Adjusting the height of the footresis 13 6 3 Adjusting the inclination of the foot ENER 13 6 4 Adjusting the height of the armrests 13 6 5 Adjusting the backrest cover 14 6 6 USE orate he Beet A Wee ha Gaeta chs Ae ae 14 6 7 Folding the armrests 14 6 8 Folding the footrests 14 6 9 Swivelling the seat frame with DEE ee es Re be aes 15 6 10 Locking the position locking device 15 6 11 Detaching and attaching the seat DIGIC ee a Bad a oS ee ea Be 15 6 12 Removing and attaching the heel loop 15 6 13 Troubleshooting 16 7 Care and maintenance 16 7 1 CIS To ie WEE 16 7 2 Maintenance 0 000 16 7 3 Changing the casters 16 10 1 General instructions 1 1 Introduction These operating instructions contain information and instructions regarding the safe and proper use of your commode In the text of these operating instructions
10. e The seat frame is fixed at the currently set inclination Proceed as follows to swivel the seat frame with back rest forward if it is swivelled backwards without a user 1 Stand next to the commode 2 Pull the removable handle with one hand and keep in this position 3 Press the seat frame with backrest down by push ing the middle of the seat surface with your other hand 4 Release the removable handle once the seat frame with backrest is swivelled forwards The seat frame is now fixed in this position 6 10 Locking the position locking device Ce Important The position locking device only locks in posi tion if the wheel is in forward position Lock the locking device at the caster with the blue foot pedal The caster is fixed in forward position AQUA TEC 6 11 Detaching and attaching the seat plate Detaching Pull up the seat plate on both sides Attaching CAUTION Risk of catching AN Do not reach between the seat surface and the seat frame when pressing down the seat plate 1 Place the seat plate on the seat frame with the hole at the front fig 2 Push the seat plate as far back as it will go Using the palm of your hand push the sides of the seat plate down and then the front and the back until the seat plate snaps into the seat frame 6 12 Removing and attaching the heel loop 1 Open the velcro fastening at the heel loop 6 fig 6 Ce Important When the bolt is unscrew
11. ed the nut below may fall out 2 Unscrew the bolt 5 fig 6 3 Take off the screw with the spacer and the nut un derneath the foot plate 4 Pull the heel loop off the spacer The heel loop can be fitted in the reverse order Ce Important The velcro fastening of the heel loop should be inside when fitted 15 AQUA TEC 6 13 Troubleshooting Difficulty in Dirt between the Disassemble the adjusting the seat seatframe and the commode into its height side section component parts and clean it thoroughly Problem The casters are difficult or impossible to turn Dirt between the Thoroughly clean fork and the wheel the casters Difficulty pushing Remove the the footrests to the footrests and side thoroughly clean them Dirt in the guides The seat frame with backrest loosened on the cannot be distributor 3 swiveled fig 11 Nut 6 fig 11 Tighten the nut The pneumatic is Contact the faulty authorised dealer 7 Care and maintenance Ce Important Hygiene is especially important as regards the toilet Regularly clean the commode and keep it clean e This product can be disinfected Choose the disinfectant in accordance with AQUATEC care guidelines These are available on request from AQUATEC 7 1 Cleaning Ce Important Do not use abrasive cleaning agents e Do not detach the holders for the accesso ries Take off any fitted accessories Pull the footrests
12. for height adjustment inserted from the inside O OAOONDOOBRWN esch 3 2 Technical data Dimensions Width 5 6 mm Depth 1 058 mm Height without head support 1 098 1 198 mm Seat width 500 mm Seat depth 452 mm Seat height 500 550 600 mm Min distance between floor and holder for the sanitary pan 422 522 mm Weight approx 21 kg Load capacity 150 kg The label fig 1 provides important technical informa tion The label is attached to the inside of the right side sec tion 4 Transport You can easily disassemble the commode into its com ponent parts section 3 1 for transport For detailed instructions on how to dismantle the de vice please refer to section 5 D Setting up Ce Important e Before setting up inspect all parts for dam age during transport This section describes the assembly Disas sembly is carried out in reverse order During assembly make sure the parts are positioned correctly in relation to each other fig 2 11 AQUA TEC 5 1 Assembling the commode 5 1 1 Inserting and moving the clips 1 Pull the two clips for height adjustment 10 fig 2 from the inside of the seat frame and insert into the side section from the outside until both lugs 6 fig 8 enclose the seat frame tube 2 fig 8 2 Remove both clips for the footrests 7 fig 2 from the plastic bag and insert into the guide 8 fig 6 of the seat frame 9 fig 6 until both lugs encl
13. ose the guide 5 1 2 Fitting the backrest 1 Lock all casters using the red foot pedals To do this push down the red foot pedal for the casters Ce Important When folded up the armrests must face for ward 2 Push the backrest 1 fig 3 from behind onto the pin on the seat frame 3 fig 3 until the collar of the backrest touches the seat frame tube Ce Important Tighten the screws using the Allen key sup plied 3 Tighten the backrest on the left and right sides using two screws on each side 2 fig 3 5 1 3 Attaching the removable handle and cable ties Ce Important Feed the wire 1 fig 4 for activating the pneu matic springs through the gap between the backrest cover and the belt locks 1 Unscrew the two cross slotted cheese head screws 4 fig 4 from the removable handle 2 fig 4 and remove the lower part of the fastening clamp 5 fig 4 2 Guide the removable handle upwards through the gap between the backrest cover and the belt locks 6 fig 4 3 Place the removable handle with the top part of the fastening clamp onto the handle of the back rest so that the hand lever 3 fig 4 points to the right 4 Fix the removable handle to the tubular frame using the bottom part of the fastening clamp and the two cross slotted cheese head screws Tight en the screws lightly Align the removable handle as shown in fig 4 Tighten the two cross slotted cheese head Screws 1
14. out of the guides Take off the seat plate and the backrest cover oe DS sn Wash the individual parts with commercial deter gents e g all purpose cleaning agents using a cloth or brush vi Rinse the parts under warm water Dry the parts with a cloth Reassemble the commode et CAUTION Burns Let the commode cool down before touch ing it In clinics in addition to the cleaning operations de scribed above the commode should be cleaned at regular intervals at 85 C for 3 minutes in the auto clave 7 2 Maintenance The commode is maintenance free provided you fol low the care instructions described above 7 3 Changing the casters CAUTION Only authorised dealers may change the casters ActiveForever com 16 Discount Therapy Equipment Medical Equipment amp Supplies SCOTTSDALE 1 800 377 8033 PEORIA
15. required position Pull out the footrest slightly fur ther if necessary 3 Push down the footrest until the groove 2 fig 6 catches the pin of the clip 7 fig 6 4 Set the other footrest to the same height as de scribed 6 3 Adjusting the inclination of the foot plates Ce Important e The inclination of the foot plates can be ad justed infinitely variably e The right and left foot plates must be ad justed in the same way 1 Loosen the Allen screw 3 fig 6 on the foot plate using a size 4 Allen key 2 Turn the foot plate 4 fig 6 to the desired posi tion 3 Tighten the Allen screw again AQUATEC 6 4 Adjusting the height of the armrests Ce Important The height of the armrests must be adjust ed to suit the user The height of the armrests must be adjust ed by the same amount on both sides The height of the right and left armrest is adjusted in the same way 1 Open the belt lock of the belt inside the backrest frame at the backrest cover 2 Open the belt lock of the belt above the armrests at the backrest cover 1 fig 9 3 Feed this belt along the backrest frame and close again Cm Important The nuts are inserted loosely in the fastening clamp and can fall out 4 Unscrew the screws 3 fig 9 of the armrest hold er 4 fig 9 using the supplied Allen key 5 Remove the fastening clamp 2 fig 9 with the nuts from the inside of the backrest frame 6 Remove
16. t locks 2 fig 10 by pressing the lugs arrow fig 10 Push the belt back through the lock Close the belt locks Slightly tension the belt 6 6 Use When using the commode observe the following safe ty rules CAUTION Seat surface may slip if loose Check whether the seat surface is firmly secured to the seat frame before use Slipping caused by the chair rolling Lock the casters using the red foot ped als before getting into or out of the chair Rolling away Lock the casters with the red foot pedals in parked position 14 CAUTION Tipping over e Push the footrests to the sides or fold up the foot plates before getting into or out of the chair Swivel the front casters so that the lock is pointing forwards before getting into or out of the chair Do not stand on the footrests Only drive the user on the commode when the seat frame and backrest are fixed in the upright position Never remove the pneumatic springs Risk of breakage during transport Only lift the commode by the sides when someone is sitting in it e Use only the handle on the backrest to steer or push the commode never the head support 6 7 Folding the arm rests CAUTION Risk of catching due to folding mechanism When folding down the armrests do not reach into the joint and make sure that no parts become jammed When folding up the armrests do not reach between the armrest and the backrest
Download Pdf Manuals
Related Search