Model: iKN150
Contents
1. Objects and Liquid Entry Care should be taken so that objects do not fall and liquids are not spilled into any openings or vents located on the product Keep splash resistant jack cover free of dirt sand or objects that could interfere with a proper seal 12 2 Attachments Do not use attachments not recommended by the product manufacturer 9 Lightning and Power Surge Protection Unplug the unit from the wall socket and disconnect the antenna or cable system during a lightning storm or when it is left unattended and unused for long periods of time This will prevent damage to the product due to lightning and powerline surges 10 Overloading Do not overload wall sockets extension cords or integral convenience receptacles as this can result in a risk of fire or electric shock Damage Requiring Service The unit should be serviced by qualified service personnel when the power supply cable or plug has been damaged objects have fallen into or liquid has been spilled into the enclosure the unit has been exposed to rain the unit has been dropped or the enclosure damaged he unit exhibits a marked change in performance or does not operate normally 12 Periods of Nonuse If the unit is to be left unused for an extended period of time such as a month or longer make sure to charge the unit before storing and periodically during storage to maintain battery 13 Servicing The user should not attempt to2. a working wall outlet While connected to AC he unit will charge until both the internal battery AND the docked external K Cell removable cell are charged To insert K Cell Make sure the iHome logo on the K Cell faces he same direction as the iHome logo on the front of the unit with the channel on the Kcell facing the back before inserting Once charged press the K Cell Eject Button to release the K Cell and remove for use as a portable USB charger Using the K Battery Level Meters The unit has one battery level meter on top of the unit for the internal battery and one for the removable K Cell external battery The table below shows the charge status indicated by each meter when unit is connected to AC power internal battery xf f N external battery aN 4 7 Battery Level Meters Internal amp External Battery Status unit is ON O segments lit dead needs charge Ist segment flashing low needs charge 1 segment solid 2nd segment flashing 25 50 charged 2 segments solid 3rd segment flashing 50 75 charged 3 segments solid 4th segment flashing 100 charged A segments solid 100 charged Using the K Charging the K Cell via USB Charge K Cell fully before use For first time charge charge for at least 3 hours Connect the included micro USB cable to the micro USB Charging Port on the top of the K Cell and connect the other standard USB plug to a computer USB AC adaptor not included or o
3. it 1 Make sure your Bluetooth device is fully charged Turn on your Bluetooth device and make 0 it discoverable by turning on Bluetooth mode check in Options or Settings A 2 Press the Power End Button to turn on the K1 The first time the unit is powered on it will enter auto pairing mode and attempt to connect to a Bluetooth device Otherwise follow s step 3 to begin pairing 3 Press and hold the Bluetooth Button for 2 seconds The pairing tone will sound twice and the Bluetooth Button will flash quickly indicating the unit is in pairing mode 4 iHome Kineta K1 should appear in your device s Bluetooth menu If Not Paired Not Connected or similar message appears select iHome Kineta K1 to connect it If prompted for a passcode enter 234 on your device s keypad a c me caan ma E E E E ji sas Poe wea and Pore vem ce Biueeooen 6 Bivercotn v a g a o bacs st mans oreaz mz ven Foriehare T Home Kineta Ki af Brahe A 0 Home Kineta kt o 5 If pairing is successful a tone will sound and the Bluetooth Button light will glow solid indicating the K1 is ready to play music There should also be an indication on your device If no device is successfully paired within 3 minutes the K1 will default to previous mode Once the K1 is paired to a device it will attempt to autolink when the device is within range about 30 feel 8 Using the K Pa
4. no charge Check to see which ones in your area do so GENERAL BATTERY PRECAUTIONS Never use or charge a battery if it appears to be leaking discolored deformed or in any way abnormal Never disassemble the unit or attempt to remove battery as that could cause leakage of alkaline solution or other electrolytic substance e Always confirm that the temperature is 5 C 35 C 41 95 Fahrenheit before you charge the battery Leakage or deterioration of the battery may occur if this warning is not heeded e Never expose a battery to any liquid e Never expose a battery to excessive heat such as direct sunlight or fire Never use a battery pack in an unventilated vehicle where excessive internal temperatures may be encountered e Always keep batteries out of the reach of infants and small children Table of Contents Included Meer Your IRI ses tscid cas sedasisd vnvaaansstvawes senas AE suas sldbsetucalensiensdelebancddeles Getting Started Charging the Unit and K Cell via AC Adaptor Battery level Meters 2s seraentovante aiii E eR E E E EE E i o o sa Ea Charging the K Cell Via ISB 04 iieri ee aean n a renia a Ee S OEA An 5 Charging Devices Using the KCell crrsceissiisereis iriri e iaiia 6 Using Bluetooth Pairing Your Device Using NFC cccccceccececeeseeseeceeeeeneetieeteeeteeeteetieens 7 Using Bluetooth Pairing Your Device Manuallly 0 0 ccceeceeeeeeeseeeseeeteeesseenseetseeteesieeeeenees 8 Pairing w
5. service the unit beyond those methods described in the user s operating instructions Service methods not covered in the operating instructions should be referred to qualified service personnel 1 mO Questions Visit www ihome com or call 1 800 288 2792 Toll Free 13 KI FCC IC Information FCC ID EMOIKN150 FCC Radiation Exposure Statement IC 986B IKN150 This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment This transmitter must not be co located or operating in conjunction with any other antenna or transmitter This device complies with Industry Canada licence exempt RSS standard s Operation is subject to the following two conditions 1 This device may not cause interference and 2 This device must accept any interference including interference that may cause undesired operation of the device This device complies with Part 15 of the FCC Rules operation is subject to the following two conditions 1 This device may not cause harmful interference and 2 this device must accept any interference received including interference that may cause undesired operation e Warning Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user s authority to operate the equipment e NOTE This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of th
6. Model iKN150 iHome K1 portable stereo speaker system K NI ETA with speakerphone and removable power CHARGE BEFORE USE opao instruction manual Questions i Contact Customer Service at 1 800 288 2792 Bluetooth KI Introduction Thank you for purchasing the iHome Kineta K1 This product is designed to provide high quality wireless sound for your iPad iPhone iPod computer tablet or other Bluetooth audio device and mobile charging on the go with the included removable K Cell rechargeable battery This unit features NFC Near Field Communication technology which allows you to wirelessly connect your NFC enabled device to instantly pair and play See your device s user manual for details on how to interact with NFC devices If your Bluetooth device does not support NFC you can pair it manually with this unit This instruction booklet explains the basic operation and care of the unit Please read it carefully and keep for future reference Maintenance K e Place the unit on a level surface away from sources of direct sunlight or excessive heat Protect your furniture when placing your unit on a natural wood and lacquered finish A cloth or other protective material should be placed between it and the furniture e Clean your unit with a soft cloth moistened only with mild soap and water Stronger cleaning agents such as thinner or similar materials can damage the surface of the unit Rinse unit with ta
7. e FCC Rules These limits are designed to provide reasonable protection against harmful interference in a residential installation This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions may cause harmful interference to radio communications However there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception which can be determined by turning the equipment off and on the user is encouraged to try to correct the interference by one or more of the following measures e Reorient or relocate the receiving antenna e Increase the separation between the equipment and receiver e Connect the equipment into an outlet on a circuit different from that to which the receiver is connected e Consult the dealer or an experienced radio TV technician for help CAN ICES 3 B NMB 3 B The device meets the exemption from the routine evaluation limits in section 2 5 of RSS 102 and compliance with RSS 102 RF exposure users can obtain Canadian information on RF exposure and compliance Declaration ID D024962 14 Troubleshooting Unit doesn t respond no power e Check that unit is fully charged OR connected to AC power e Make sure your device is properly paired with the K1 e Make sure the Power is ON e f the unit seems frozen or locked up insert the
8. end of a paperclip or similar into the Reset button under the jack cover on the left of the unit to reset unit Resetting Bluetooth If Bluetooth function is not operating properly you may wish to reset Bluetooth To do so press and hold the Bluetooth Button 10 seconds You will hear a long high tone You will then need to repair any previously paired devices K Cell Won t Eject If the KCell won t eject even after pressing the K Cell Eject Button turn the unit over and insert the end of a paper clip or similar at a slight angle into the Battery Release pinhole port located on the bottom of the unit Trouble pairing device computer with K1 Bluetooth implementation varies depending on your device s hardware and operating system Please see our website for updates on pairing e Make sure you have the latest firmware for your device e Make sure your device is working properly Check your device s manual for details on Bluetooth pairing and linking e When you power ON the speaker it will automatically link with the last previously paired Bluetooth device if the device is still within range approx 30 feet To pair with a different device you must turn off Bluetooth capability on the already paired device or take it out of range For further information and to see the latest instructions visit www ihome com support t5 Limited 1 Year Warranty iHome Products a division of SDI Technologies Inc hereafter referred to as SDI warra
9. h Pairing Your Device Using NFC This unit features wireless NFC pairing which allows NFC enabled devices to pair and play instantly For pairing non NFC devices please see the following section Pairing Your Device Manually The first time the unit is powered on it will enter auto pairing mode Follow steps below to pair 1 Turn on your Bluetooth enabled NFC enabled device and turn on NFC capability as described in the device s user manual 2 Place your NFC enabled device in play mode 3 Touch the IW area of your playing NFC device against the NFC antenna area on the top left of the unit near the Power End Button The unit will turn on and enter automatic pairing mode a tone will sound and the Bluetooth button will flash quickly while the unit attempts to pair 4 iHome Kineta K1 should appear on your device s menu If your device asks if you wish to pair accept select Yes or similar Once paired with a device the Bluetooth button will glow solid confirmation tones will sound and your music will play through the unit Powering off the unit will disconnect Bluetooth device To disconnect your device without powering the unit off simply touch it again on the antenna area on top of the unit Pairing Your Device Manually Using the K Pairing is the setup process to introduce your Bluetooth capable device to the K1 Once your M device is paired the K1 can recognize it and you can play your audio through
10. he original purchaser In no event will SDI or any of its affiliates contractors resellers their officers directors shareholders members or agents be liable to you or any third party for any consequential or incidental damages any lost profits actual exemplary or punitive damages Some states do not allow limitations on implied warranties or exclusion of consequential damages so these restrictions may not apply to you This warranty gives you specific legal rights and you may also have other rights which vary from state to state Your acknowledgment and agreement to fully and completely abide by the above mentioned disclaimer of warranty is contractually binding to you upon your transfer of currency money order cashier s check or credit card for purchase of your SDI product 2014 SDI Technologies Inc All rights reserved Questions Visit www ihome com or call 1 800 288 2792 Toll Free iKN150 121714A Printed in China
11. iring with a Different Device When you power ON the speaker it will automatically link with the most recently connected Bluetooth device as long as that device is still within range approx 30 feet To pair with a different device follow steps 1 4 under Pairing Your Device on previous page Playing Audio Via Bluetooth 1 Press the Power End Button to turn on the unit The Bluetooth Button will glow solid when a linked device is in range and detected You can then listen to audio streamed wirelessly from your paired Bluetooth device 2 Press the gt Talk Play Pause Button to play audio from your device Press again to pause play and once more fo resume play When Bluetooth audio is active the Bluetooth Button will glow solid white 3 Double press the gt Talk Play Pause Button to advance to the next track press three times to restart the current track or go to the previous track depending on how close you are to the start of the track Use controls on your Bluetooth device to search within tracks 4 Press the or 9 Button to adjust the K1 volume You can also adjust volume on your device 5 When done listening press the Power End Button to turn the unit OFF Remember to turn off your device too Using the K Speakerphone Operation NOTE The unit must be powered on and linked to a Bluetooth phone to receive a call When a call is received playing music is muted to hear the ring tone The Talk Play Pau
12. ith a Different Device Playing Audio Via Bluetooth 0 0 ccc eee eee 9 Speakerphone QVeratiGn ssip ana eie lshimenstea E O EER O Playing Audio via Aux I sorinncioirssre ssi nod iinei ui eiiiai rakin i eiai 1 Consumer Product Safety Guide esscisrirarc serian i i e iea a Ae ekee 12 13 FO Gilnonmahanes eaae ean a a Aaaa a AES E REO R 4 Troubleshooting enseri E E a N E E 5 WOON a e an E AN E S AN E A E 6 Included e K system e KCell e AC adaptor e USB charging cable K CEUL K Cell K1 system USB cable AC adaptor K Meet Your K1 Power End Call Button Bluetooth Pairing Internal Battery level meter K Talk Play Pause Button Microphone Top L NFC Antenna Area K Cell Eject Button Splash resistant Jack Cover attached KCell Volume Down Volume Up External Battery Button Button level meter Left Side Aux in Jack Reset Button DC Jack auxin reset DC9V2 5 Getting Started Charging the Unit and K Cell via AC Adaptor Charge unit fully with K Cell inserted before use For first time charge charge for at least 8 hours Use iHome K Cell battery ONLY Do NOT attempt to use with insert other USB battery cells Pull back the jack cover on the left of the unit to access jacks Connect the included AC adaptor to the DC jack and connect he other end to
13. nts this product to be free from defects in workmanship and materials under normal use and conditions for a period of one 1 year from the date of original purchase Should this product fail to function in a satisfactory manner it is best to first return it to the store where it was originally purchased Should this fail to resolve the matter and service still be required by reason of any defect or malfunction during the warranty period SDI will repair or at its discretion replace this product without charge This decision is subject to verification of the defect or malfunction upon delivery of this product to the Factory Service Center authorized by Customer Service f service is required please call Customer Service at 1 800 288 2792 to obtain a Return Authorization Number and shipping instructions Disclaimer of Warranty NOTE This warranty is valid only if the product is used for the purpose for which it was designed It does not cover i products which have been damaged by negligence or willful actions misuse or accident or which have been modified or repaired by unauthorized persons ii cracked or broken cabinets or units damaged by excessive heat iii damage to digital media players CD s or tape cassettes if applicable iv the cost of shipping this product to the Factory Service Center and its return to the owner his warranty is valid only in the United States of America and does not extend to owners of the product other than to t
14. onal safety However improper use can result in potential electrical shock or fire hazards Please read all safety and operating instructions caretully before installation and use and keep these instructions handy for future reference Take special note of all warnings listed in these instructions and on the unit Oo Water and Moisture Keep Unit and K Cell battery away from moisture Do not operate near water e Do NOT open Jack Cover if wet or in a wet environment Ventilation The unit should be situated so that its location or position does not interfere with its proper ventilation For example it should not be situated on a bed sofa rug or similar surface that may block ventilation openings Also it should not be placed in a builtin installation such as a bookcase or cabinet which may impede the flow of air through the ventilation openings Heat The unit should be situated away from heat sources such as radiators heat registers stoves or other appliances including amplifiers that produce heat Power Sources The unit should be connected to a power supply only of the type described in the operating instructions or as marked on the appliance Power Cable Protection Power supply cables should be routed so that they are not likely to be walked on or pinched by items placed upon or against them Cleaning The unit should be cleaned only using a warm damp cloth Do not use solvents etc
15. p water and wipe dry after submersion in salt water or swimming pool Long term Storage of Your Product e Store in a cool dry place e Unit should be charged before storing e If stored for a long period of time unit may be unresponsive until charged for a number of hours depending on discharge level e Do not store for more than a year without charging as this can permanently harm the battery e After long term storage if unit is unresponsive after charging RESET unit while connected to AC and recharge the unit Internal Rechargeable Lithium ion Battery This device uses an internal rechargeable lithium ion battery that should last the lifetime of the device If you suspect your battery may be dead try charging it several times and try resetting the unit WARNING DISPOSAL OF UNIT Please do NOT attempt to change the battery yourself If the battery has died and you do not want us to replace your battery you should follow the disposal instructions below e Never dispose of used batteries electronics with ordinary solid wastes since they contain toxic substances e Always dispose of used batteries electronics in accordance with the prevailing community regulations that apply to the disposal of batteries electronics If there are no local regulations concerning battery electronics disposal please dispose of the device in a waste bin for electronic devices e Many electronics retailers now recycle batteries and other electronic components at
16. se Button will flash green and the Power End Button will flash red 1 Press the gt Talk Play Pause Button to answer a call or press the Power End Button to ignore the call For call waiting function press the gt Talk Play Pause Button to place a currently active call on hold and answer a new call press the Talk Play Pause Button to switch between the calls 2 When a call is completed press the Power End Button to end the call and resume previous function Using the K Playing Audio via Aux In 1 Connect one end of a 3 5mm stereo audio cable not included to the Auxin jack on the left side of the unit and connect the other end to the headphone or line out jack on your audio device 2 Press the Button on the unit fo turn it on Power on the audio device and use the controls on the device to play or pause audio and navigate tracks 4 Press the 4 or 4 Button to adjust the system volume You can also adjust volume on your device 5 When done listening press the Button to turn the unit OFF Remember to turn off your device too a CI b mB Mobile Phone PC Tablet Game Devices iPod Laptop MP3 MP4 NOTE Make sure no Bluetooth device is playing or you will not hear the Auxin audio playing O Consumer Product Safety Guide IMPORTANT SAFETY INSTRUCTIONS When used in the directed manner this unit has been designed and manufactured to ensure your pers
17. ther USB power source The LED on the K Cell flashes while it is charging and becomes solid once fully charged A charged K Cell can operate the unit when the internal battery is depleted Top of K Cell Charge device from K Cell Charges K Cell Computer e connected to working outlet Computer USB port USB AC adaptor not included QW USB AC adaptor connected to working outlet 5 Using the K Charging Devices Using the K Cell Charge K Cell fully before use For first time charge charge for at least 3 hours Connect the USB cable plug included with your device to the standard Charging Port on the top of the K Cell and connect the other end to the device you wish to charge To charge an Android or Windows phone you may use he USB to micro USB cable supplied with this model To charge an Apple OS iPhone or iPod with either Lightning or 30 pin connector use the charging cable that was supplied with your Apple device Bypass Charging Mode To charge a device when the inserted K Cell is depleted but power remains in he K1 internal battery press and hold the Button for about 5 seconds to bypass the K Cell and charge directly from the K1 All LEDs will flash twice to indicate bypass charge mode The internal battery charge indicator will remain it The K1 will not play in Bypass Charging Mode To exit this mode press the Power Button or connect the K1 to AC power Using the K Using Bluetoot
Download Pdf Manuals
Related Search