CBH Basic systems
Contents
1. IMPROVING COMFORT CBH Basic systems LI NAK i To learn more about LINAK please visit WE IMPROVE YOUR LIFE Page 1 of 20 Page 2 of 20 Contents lr e 4 Rie his MN TERN 5 Important information Safety instructions Safety issues Before installation re installation or troubleshooting Before Start up Repairs 0 Manufacturer s declaration 0 Misc the HOMELINE system 1 Warranty 1 Maintenance 1 IX arn 1 Description of the HOMELINE CBH Basic system 2 Mounting guideline for the CBH 2 Cable relief 3 Disposal of LINAK s products 4 Main groups of disposal 4 Disposal of batteries 4 IJ 5 Drawings 6 Addresses nro n om Do M 20 Page 3 of 20 Preface We are delighted that you have chosen a product from LINAK LINAK systems are high tech products based on many years of experience in the manufacture and development of actuators electric control boxes controls and chargers This User Manual does not address the end user It is intended as a source of information for the manufacturer of the equipment or system only and it will tell you how to install use and maintain your LINAK electronics It is the respo2. 27 11 312 2292 or 27 11 207 7600 Switch Board Fax 27 11 315 6999 E mail gartht isagroup co za www isaza co za UNITED ARAB EMIRATES Mechatronics Phone 971 4 267 4311 Fax 49714267 4312 E mail mechtron emirates net ae www mechatronics ae For contact details on other countries please visit www linak com or contact LINAK INTERNATIONAL Phone 45 73 15 15 15 Fax 45 74 45 90 10 Fax 445 73 15 16 13 Sales E mail info linak com www linak com Page 20 of 20 USA LINAK U S Inc North and South American Headquarters Phone 1 502 253 5595 Fax 1 502 253 5596 E mail info linak us com www linak us com NORWAY LINAK Norge AS Phone 47 32 82 90 90 Fax 47 32 82 90 98 E mail info linak no www linak no POLAND LINAK Polska Phone 48 22 500 28 74 Fax 48 22 500 28 75 E mail dkreh linak dk www linak pl REPUBLIC OF KOREA LINAK Korea Ltd Phone 82 0 2 6231 1515 Fax 82 0 2 6231 1516 E mail scully linak kr www linak kr RUSSIAN FEDERATION 000 LINAK Phone 7 495 280 14 26 Fax 7 495 687 14 26 E mail info linak ru www linak cu SPAIN LINAK Actuadores S L u Phone 34 93 588 27 77 Fax 34 93 588 27 85 E mail esma linak es www linak es SWEDEN LINAK Scandinavia AB Phone 46 8 732 20 00 Fax 468 732 2050 E mail info linak se www linak se Terms of use SWITZERLAND LINAK AG Phone 41 43 388 31 88 Fax 41 43 388 31 87 E mail info linak ch www
3. the equipment has been used and maintained correctly and has not been tampered with Furthermore the system must not be exposed to violent treatment In the event of this the warranty will be ineffective invalid For further details please see LINAK A S ordinary conditions of sale Maintenance Clean dust and dirt on the outside of the system at appropriate intervals and inspect for damage and breaks Inspect the connections cables and plugs and check for correct functioning as well as fixing points The cleaners and disinfectants must not be highly alkaline or acidic pH value 6 8 ETL marking Due to space limitations the complete ETL marking demands are not represented on the marking plates The full ETL Recognized Component markings are shown here RECOGNIZED COMPONEN 6 CN 120690 Cert to CSA Std C22 2 No 68 09 ETL Recognized Component mark for Canada and United States Intertek RECOGNIZED COMPONENT C N 9901916 Cert to CSA Std C22 2 No 68 09 ETL Recognized Component mark for Canada and United States Intertek RECOGNIZED C N 4008003 Cert to CSA Std C22 2 No 68 09 Trenes ETL Recognized Component mark for Canada and United States RECOGNIZED COMPONENT Kp N epos Recognized Component mark for Canada and United States RECOGNIZED COMPONEN C N 4008671 us Conforms to UL962 Cert to CSA Std 22 2 No 68 09 nea ETL Recognized Component
4. 2 POWER SUPPLY Made In China Page 15 of 20 DRAWING APPENDIX CBH Basic S N N ESS H e RN 22 41 5 169 16 20 5 5001 49 32 Om al standby power 5 5002 EL D x V T1 1 32 Ow cll Standby power 001 LA27 e 0 2 g 0 0 170 Drawing no LA27001B HB 10 with cable LINAK APPLICATION POLICY The purpose of the application policy is to define areas of responsibilities in relation to applying a LINAK product defined as hardware software technical advice etc related to an existing or new customer application LINAK products as defined above are applicable for a wide range of applications within the Medical Furniture Desk and Industry areas Yet LINAK cannot know all the conditions under which LINAK products will be installed used and operated as each individual application is unique The su
5. 420581702452 E mail ponizil linak z www linak cz DISTRIBUTORS ARGENTINA Novotec Argentina SRL Phone 54 11 4303 8900 8989 Fax 54 11 4032 0184 E mail info novotecargentina com www novotecargentina com AUSTRALIA Ballarat Industrial Supplies www ballind com au BL Shipways amp Co www blshipway com au Gas Strut Marine and Industrial www gasstrutmarine com au Prime Motion amp Control www primehyd com au West Vic Industrial Supplies www westvicindustrial com au COLOMBIA MEM Ltda Phone 57 1 334 7666 Fax 57 1 282 1684 E mail servicioalcliente memltda com co www memltda com co INDONESIA Pt Himalaya Everest Jaya Phone 6 221 544 8956 6 221 544 8965 Fac 46221619 4658 6 221619 1925 E mail hejplastic div centrin net id wwWw hej co id DENMARK LINAK A S Group Headquarters Guderup Phone 445 73 15 15 15 Fax 45 74 45 80 48 Fax 45 73 15 16 13 Sales E mail info linak com www linak com DENMARK LINAK Danmark A S Phone 445 86 80 36 11 Fax 45 86 82 90 51 E mail linak linak silkeborg dk www linak dk FINLAND LINAK OY Phone 358 10 841 8700 Fax 358 10 841 8729 E mail linakGlinak fi www linak fi FRANCE LINAK France E U R L Phone 433 0 2 41 36 34 34 Fax 33 0 2 41 36 35 00 E mail linak linak fr www linak fr GERMANY LINAK GmbH Phone 449 6043 9655 0 Fax 49 6043 9655 60 E mail info linak de www linak de INDIA LINAK A S
6. Electronics scrap By now almost all our casted plastic parts are supplied with an interior code for plastic types and fibre contents if any Main groups of disposal Product main groups Metal scrap Cable scrap Electronics scrap Plastic recycling Comments or combustin LA27 KA20 X X X X CBH1200B X X 5001 5 5002 X X HB10 HBBRIOO2 X X X Disposal of batteries Details regarding safe disposal of used and leaking batteries Batteries should be disposed in accordance with appropriate federal state and local regulations LINAK recommends that used or leaking batteries are disposed through local recycling systems Please do not throw used or leaking batteries in normal household waste or in nature This will cause damage to the enviroment How to deal with leaking batteries Leaking batteries should be disposed as described above If leaking batteries are discovered in the product the batteries must be removed at once to minimise damage to the product If leaking batteries are left in the product it might become defective It is recommended to use plastic gloves when handling leaking batteries The contents of leaking batteries can cause chemical burns and respiratory irritation If exposed to the contents of a leaking battery please wash with soap and water If irritation persists please seek medical attention In case of eye contact please flush eyes thoroughly wi
7. India Liaison Office Phone 491 120 4393335 Fax 91 120 4273708 E mail infoGlinak in www linak in IRELAND LINAK UK Limited Ireland Phone 444 0 121 544 2211 Fax 44 0 121 544 2552 44 0 796 855 1606 UK Mobile SLOVAKIA LINAK Slovakia s r o Phone 4421 51 75 63 414 Fax 421 51 75 63 410 E mail jp linak sk www linak com ITALY LINAK Italia S r l Phone 439 02 48 46 33 66 Fax 39 02 48 46 82 52 E mail infoGlinak it www linak it JAPAN LINAK Phone 81 45 533 0802 Fax 81 45 533 0803 E mail linak linak jp www linak jp MALAYSIA LINAK Actuators Sdn Bhd Phone 60 4 210 6500 Fax 60 4 226 8901 E mail info linak asia com www linak my NETHERLANDS LINAK Actuator Systems B V Phone 31 76 5 42 44 40 Fax 31 76 5 42 61 10 E mail info linak nl www linak nl NEW ZEALAND LINAK New Zealand Ltd Phone 64 9580 2071 Fax 64 9580 2072 E mail nzsales linak com au www linak co nz 35 387 634 6554 Republic Of Ireland Mobile E mail sales linak co uk www linak co uk IRAN Bod Inc Phone 98 2188998635 6 Fax 98 2188954481 E mail info bod ir www bod ir RUSSIAN FEDERATION 000 FAM Phone 7 812 3319333 Fac 7 812 3271454 E mail purchase fam drive ru www fam drive ru SINGAPORE Servo Dynamics Pte Ltd Phone 65 6844 0288 Fax 65 6844 0070 E mail servodynamics servo com sg www servo com sg SOUTH AFRICA Industrial Specialised Applications CC Phone
8. LINAK 2015 04 MA M9 02 528 A
9. is a ZERO control box A hallmark of the CBH ZERO platform is the very low power consumption in standby mode saving energy and money The low standby consumption is standard 4 standby power Page 13 of 20 Disposal of LINAK s products As LINAK s customers often ask us how our products can be disposed of or scrapped we have prepared this guidance that enables a classification to different waste fractions for recycling or combustion Guidance We recommend that our products be disassembled as much as possible and divided into different waste groups for recycling or combustion For example waste can be sorted into metals plastics cable scrap combustible material and recoverable resources Some of these main groups can be further divided into subgroups e g metal can be divided into steel aluminium copper and plastic can be divided into ABS PA PE PP As an example the table below breaks down the different components in LINAK products to various recycling groups Product Components Recycling group Column Actuator Spindle and motor Metal scrap Plastic housing Plastic recycling or combustion Cable Cable scrap or combustion PC boards Electronics scrap Control Box PC boards Electronics scrap Plastic housing Plastic recycling or combustion Cable Cable scrap or combustion Transformer Metal scrap Handset Control Plastic housing Plastic recycling or combustion Cable Cable scrap or combustion PC boards
10. 02 Controls HB10 HBBRIOO2 Page 5 of 20 Important information Important information on LINAK products can be found under the following headings Warning Failure to comply with these instructions may result in accidents involving serious personal injury Failing to follow these instructions can result in the product being us l lt 2 damaged or being destroyed Safety instruction A General Safe use of the system is possible only when the operating instructions are read completely and the instructions contained are strictly observed Failure to comply with instructions marked with the NOTE symbol may result in serious damage to the system or one of its components It is important for everyone who is to connect install or use the A systems to have the necessary information and access to this User Manual Follow the instructions for mounting risk of injury if these instructions are not followed The appliance is not intended for use by young children or infirm persons without supervision A If there is visible damage on the product it must not be installed Note that during construction of applications in which the actuator A is to be fitted there must be no possibility of personal injury for example the squeezing of fingers or arms Only the power supply type 5 5001 or 5 5002 shall be used with the system CBH basic System The power supply shall not be covered while operating to allow su
11. Control Boxes CB7 CB9H CBH Advanced CBH Basic And Linear Actuators LA27 LA27CS LA28 LA29 LA31 HOMELINE Dual Actuators TD1 TD3 And Controls HB10 HB10RF HB20 HB20RF HB40 HB60 HC10 HC10RF HC20RF And Accessories DC CONNECTOR DJBH LED Lightbox Lightplug001 Massage Motor SMPS001 5 5002 TR6 USB Connector comply with the following parts of the Machinery Directive 2006 42 EC ANNEX Essential health and safety requirements relating to the design and construction of machinery 1 5 1 Electricity supply The relevant technical documentation is compiled in accordance with part B of Annex VII and that this documentation or part hereof will be transmitted by post or electronically to a reasoned request by the national authorities This partly completed machinery must not be put into service until the final machinery into which it is to be incorporated has been declared in conformity with the provisions of the Machinery Directive 2006 42 EC where appropriate Nordborg 2014 10 09 222 LINAK A S John Kling B Sc E E Certification and Regulatory Affairs Authorized to compile the relevant technical documentation Original Declaration Page 10 of 20 Misc on the HOMELINE system Warranty There is a 36 months warranty on the HOMELINE products CBH Basic Systems against manufacturing faults from the production date of the individual products see label LINAK A S warranty is only valid in so far as
12. beds Mechanical spline The splines function so that the actuator can only push not pull During pull in the actuator the inner tube is lifted off the thread bush and the actuator can therefore never pull a load only push Functional test of mechanical splines When the piston rod is at the innermost position it must be possible to pull it out manually to its full travel length and to press it in again without much resistance and without using the motor If this is not possible contact your nearest LINAK dealer Usage Duty cycle 2 18 2 minutes continuous use followed by 18 minutes not in use Ambient temperature 5 C to 40 C the actuator must also be at this temp A Warning e f the actuator does not work as described above the risk of injury due to squeezing can arise The actuator must therefore immediately be sent for service at the nearest authorised LINAK workshop Do only use the actuator within specified working limits Do not sideload the actuator Page 12 of 20 Cable relief The CBH features a cable relief option By using these small holes on the CBH you can tie the DC cables from the SMPS unit to the control box by use of standard cable ties The circles illustrate the small holes on the control box where a standard cable tie can be mounted and the DC cable from the SMPS Handset cable can be fixed The extra cable tie length is just cut off when the cables have been fixed The CBH
13. e 7 of 20 Before installation re installation or troubleshooting eStop the actuators e Pull out the mains plug e Relieve the actuators of any loads which may be released during the work Before start up sure that the system has been installed as instructed in this User Manual Make sure that the voltage of the control box SMPS is correct before the system is connected to the mains e System connection The individual parts must be connected before the control box SMPS is connected to the mains See the User Manual for LINAK actuators if necessary During operation elf the control box makes unusual noise or smells switch off the mains voltage immediately Take care that the cables are not damaged e products must only be used in an environment that corresponds to their IP protection Misc The actuator system has a sound level below 70dB A in typical applications Updated manuals and declarations can always be found here www linak com homeline Page 8 of 20 Only for EU markets This appliance can be used by children aged from 8 years and above and persons with reduced physical sensory or mental capabilities or lack of experience and knowledge if they have given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved Children shall not play with the appliance Cleaning and user maintenance shall not be made by children without super
14. fficient cooling of this appliance to be continued Page 6 of 20 2 The appliance is only to be used with the power supply unit provided with the appliance Furthermore take care about the connecting wires from the power supply to the CBH Basic System don t damage this by overrun Assure free space for movement of application in both directions to avoid blockade Safety issues 2 4 g The builder of the equipment shall ensure that the use of the component complies with relevant standards like the Machine Directive Care must be taken to avoid squeezing of cables as it can cause movement of the system The 5 5001 002 must not be packed in heat insulating material but must be placed so that it can emit waste heat to the surroundings There are no ventilation holes to consider the SMPS emits heat through its surface Only the power supply type 5 5001 or 5 5002 or similar suited products meeting the requirements EN 60335 1 shall be used with the system CBH basic System Please observe that the actuators LA27 used for CBH Basic systems are with signal end stop switches and are not compatible with CBH Advanced systems The 5 5006 is not compatible with the CBH Basic system The system is only released to 24V DC 5 5006 29V DC It is possible only to use 1 power supply 5 5001 or 5 5002 for 2 CBH systems Remember speed may decrease when running 2 systems at the same time Pag
15. itability and functionality of the LINAK product and its performance under varying conditions application vibration load humidity temperature frequency etc can only be verified by testing and shall ultimately be the responsibility of the LINAK customer using any LINAK product LINAK shall be responsible solely that the LINAK products comply with the specifications set out by LINAK and it shall be the responsibility of the LINAK customer to ensure that the specific LINAK product can be used for he application in question Page 19 of 20 FACTORIES CHINA LINAK Shenzhen Actuator Systems Ltd Phone 86 755 8610 6656 Fax 86 755 8610 6990 E mail sales linak cn www linak cn SUBSIDIARIES AUSTRALIA LINAK Australia Pty Ltd Phone 61 3 8796 9777 Fac 613 8796 9778 E mail sales linak com au www linak com au AUSTRIA LINAK Reprasentanz sterreich Wien Phone 43 1 890 7446 Fax 43 1 890 744615 E mail info linak de www linak at BELGIUM amp LUXEMBOURG LINAK Actuator Systems NV SA Phone 32 0 9 230 01 09 Fax 32 0 9 230 88 80 E mail beinfo linak be www linak be BRAZIL LINAK Do Brasil Com rcio De Atuadores Ltda Phone 55 11 2832 7070 Fax 55 11 2832 7060 E mail infoGlinak com br www linak com br CANADA LINAK Canada Inc Phone 1 502 253 5595 Fac 1 416 255 7720 E mail info linak ca www linak us com CZECH REPUBLIC LINAK C amp S S R O Phone 420581741814 Fac
16. linak ch TAIWAN LINAK A S Taiwan Representative Office Phone 886 2 27290068 Fax 886 2 27290096 Mobile 886 989292100 E mail michael chen linak com tw www linak com tw TURKEY LINAK ith ihr San ve A S Phone 90 312 4726338 Fax 490312 4726635 E mail info linak com tr www linak com tr UNITED KINGDOM LINAK UK Limited Phone 44 0 121 544 2211 Fax 44 0 121 544 2552 E mail sales linak co uk www linak co uk The user is responsible for determining the suitability of LINAK products for specific application LINAK takes great care in providing accurate and up to date information on its products However due to continuous development in order to improve its products LINAK products are subject to frequent modifications and changes without prior notice Therefore LINAK cannot guarantee the correct and actual status of said information on its products While LINAK uses its best efforts to fulfil orders LINAK cannot for the same reasons as mentioned above guarantee the availability of any particular product Therefore LINAK reserves the right to discontinue the sale of any product displayed on its website or listed in its catalogues or other written material drawn up by LINAK All sales are subject to the Standard Terms of Sale and Delivery for LINAK For a copy hereof please contact LINAK LINAK 9 WE IMPROVE YOUR LIFE LINAK A S reserve the right to make technical alterations Copyright
17. mark for Canada and United States Page 11 of 20 Description of the HOMELINE CBH Basic system A CBH Basic system consists of CBH Basic control box 5 5001 or 5 5002 power supply A27 linear actuator HB10 handset Mounting guidelines for the CBH The control box is to be fastened with 2 screws with a head diameter between 8 and 10 mm With regard to the surface pressure 10 mm is preferable See drawing for placing of mounting holes and the space the CBH takes up The mounting surface to which the control box is attached should have a surface evenness better than 0 5 mm The mounting screws on the control box must be fastened with a max torque of 1 Nm The CBH must not be packed in heat insulating material but must be placed so that it can emit waste heat to the surroundings There are no ventilation holes to consider the CBH emits heat through its surface The electric connection The system is to be connected as follows Fach linear actuator must be connected to the socket on the control box by means of the motor cable which has a 6 pin plug in each end The control is to be connected on the opposite same side of the control box as the actuators Finally connect the SMPS unit to the CBH via a DC port p u Please note that the control box SMPS must only be connected to the voltage stated on the labels The LA27 actuator is a powerful actuator designed for applications such as leisure
18. nsibility of the manufacturer of the end use product to provide a User Manual where relevant safety information from this manual is passed on to the end user We are sure that your LINAK product system will give you many years of problem free operation Before our products leave the factory they undergo full function and quality testing Should you nevertheless experience problems with your LINAK product system you are always welcome to contact your local dealer LINAK subsidiaries and some distributors situated all over the world have authorised service centres which are always ready to help you LINAK provides a warranty on all its products This warranty however is subject to correct use in accordance with the specifications maintenance being done correctly and any repairs being carried out at a service centre which is authorised to repair LINAK products Changes in installation and use of LINAK products systems can affect their operation and durability The products are not to be opened by unauthorised personnel The User Manual has been written based on our present technical knowledge We are constantly working on updating the information and we therefore reserve the right to carry out technical modifications LINAK A S Page 4 of 20 Valid for This User Manual is valid for the following products See the first 3 5 characters on the label Actuators LA27 KA20 Control box CBH1200B Power supply 5 5001 or 5 50
19. th water for 15 minutes and Seek medical attention Page 14 of 20 Labels Label for CBH Basic GROUP LINAK S O HEADQUARTERS WE IMPROVE YOUR LIFE SMEDEVAENGET 8 DESIGNED IN DENMARK DK 6430 NORDBORG CBH12XXX 2014 09 02 24V 30V DC Max 8A Item Date U In In Op INT 10 Max 2min 18min S W PIN 3002001 Ver XXX a CIN 1234567 A 0 1234567 0001 Assembled in XX YY Label for 5 5001 LINAK 2 WE IMPROVE YOUR LIFE Model No ASW0539 24020002A Type Power Supply Serial No CY1227 C No 5 5001 A NOT TO BE OPENED BY UNAUTHORIZED Input 230 240V 50Hz 1 2A B6 Output 24V 2 Made In China Label for the Handset HB12 DE 1 ul co 4567 0001 1 MADE BY LINAK A S DENMARK eR Label for LA27 LINAK T3 WE IMPROVE YOUR LIFE 273100A01405040 Prod Date 2009 03 18 0 7654321 Max Load Push 1500N 4 Power Rate 24 V Max 3 5 A Duty 10 BE OPENED BY UNAUTHORIZED PERSONNEL TU PEE en 9 0 123456 0001 MADE LINAK A S DENMARK Label for 5 5002 LINAK 6 WE IMPROVE YOUR LIFE Type Power Supply 5 5002 5 Input 120 60 2 1 2A AN Output 24V Model No ASW0551 24020002A Serial No PO 632312 CY140401 NOT TO BE OPENED BY UNAUTHORIZED PERSONNEL 3JXT YL us LISTED CLASS
20. vision Only for Non EU markets Persons who do not have the necessary experience or knowledge of the product products must not use the product products Besides persons with reduced physical sensory or mental abilities must not use the product products unless they are under surveillance or they have been thoroughly instructed in the use of the apparatus by a person who is responsible for the safety of these persons Moreover children must be under surveillance to ensure that they do not play with the product Misuse Do not overload the actuators this can cause danger of personal A injury and damage to the system Do not use the actuator system for lifting persons Do not sit or stand on a table while operating risk of personal injury Do not use the system in environments other than the intended indoor use Page 9 of 20 Repairs In order to avoid the risk of malfunction all HOMELINE repairs must only be carried out by authorised LINAK workshops or repairers as special tools must be used and special gaskets must be fitted Lifting units under warranty must also be returned to authorised LINAK workshops Warning If any of the HOMELINE products are opened there will be a risk of subsequent malfunction DECLARATION OF INCORPORATION OF PARTLY COMPLETED MACHINERY LINAK A S Smedevzenget 8 DK 6430 Nordborg Herewith declares that LINAK HOMELINE products as characterized by the following models and types
Download Pdf Manuals
Related Search