KBox A-20x Manual
Contents
1. 19 IBN 19 Te GEO SFO SED 19 7 3 4 X105 X106 Ethernet Connectors ETH iusoaa ioo o insan Asahan sa eo aqua Lee En aoaaa 19 Tee Mer SEU CLO ac cad NA E EN PAI 20 OT COM na 20 7 3 7 X202 Serial Port COM 2 Option KBox A 201 SMARC sXQU only o ooW Wo W mmm 20 7 3 8 X203 Serial Port COM 3 Option KBox A 202 SMARC sXBT ONLY oo W W WoW WWW menata 20 Ie berang rola SIGE VIEW ena bone on na Kost Mata Sa nata ob asa 21 1 52 Keju and Bottom Side VICW an a aa PN an NP AA NN TN TH eee 21 EON Pl Pa an 22 7 6 1 Rear Side View of the KBox A 201 A 202 with Vertical Mounting Bracket o oo WWW WWW 22 Ara DUN RAGIP OW AOI cc 23 www kontron com 3 1 Table of Contents KBox A 201 A 202 User s Guide Version 1 0 a ATIS ODEON ena Daan an asa as 23 8 Thermal Considerations e 24 SIA Vanda on Ma asa 24 Su COM CCIM oH ueste 24 an 24 Oe ae E aan aa aa 24 9 Installation UC2. 38 13 1 3 Serial interface COM 2 RS232 KBox A 201 SMARC sXQU only eee eene nennen nnne nennen 39 13 1 4 Serial interface COM 3 RS485 KBox A 202 SMARC sXBT 39 Isl P TOT 108 USB am be 39 13 1 6 X 105 as ETH 1 and X 106 as ETH 2 Ethernet Connectors o oooWoWo WooWo WoWoWoWoWW mann 40 13 1 7 X102 HDMI PO banana aan dana ASN NS 41 14 Techmical 42 14 1 Returning Defective Merchandise isa esty ese PEE TATE ni ena anna an OA EAEE EAEE 42 4 www kontron com 1 Table of Contents KBox A 201 A 202 User s Guide Version 1 0 1 1 Table of Figures AUI H E 13 ie T 17 EIOS an ines IDEs sees nP A E 17 Fig 4 Front side view config with vertical mounting plate ooo WWW WWW aan 17 FIG Se CIN SIMS an an nana E aa Sae 17 FIG OS OD 17 Pied ee SIE C 17 PIG on VIEW EOM ds A Z O enno seen aa ea aa anna 18 Fig 9 X101 24V
3. EN GENRE 35 www kontron com 5 2 Introduction KBox A 201 A 202 User s Guide Version 1 0 2 Introduction Kontron would like to point out that the information contained in this manual may be subject to technical alteration particularly as a result of the constant upgrading of Kontron products The attached documentation does not entail any guarantee on the part of Kontron with respect to technical processes described in the manual or any product characteristics set out in the manual Kontron does not accept any liability for any printing errors or other inaccuracies in the manual unless it can be proven that Kontron is aware of such errors or inaccuracies or that Kontron is unaware of these as a result of gross negligence and Kontron has failed to eliminate these errors or inaccuracies for this reason Kontron expressly informs the user that this manual only contains a general description of technical processes and instructions which may not be applicable in every individual case In cases of doubt please contact Kontron This manual is protected by copyright All rights are reserved by Kontron Copies of all or part of this manual or translations into a different language may only be made with the prior written consent of Kontron Kontron points out that the information contained in this manual is constantly being updated in line with the technical alterations and improvements made by Kontron to the products and thus this manual only refl
4. KBox A 201 A 202 User s Guide Version 1 0 1059 4235 3 kontron 1 Table of Contents KBox A 201 A 202 User s Guide Version 1 0 This page has been intentionally left blank 2 www kontron com 1 Table of Contents KBox A 201 A 202 User s Guide Version 1 0 1 Table of Contents RR 3 1 5 PAM SUNAN NB EA 6 2 As SVMOOIS USEC ti this 7 2 2 Information about the System Designation and Description in this ManualL o oooWoWoo KW XXX 7 2 2 1 Product Variants of the KBox A 200 Family oo onus ERU ba ETE Pax SEPT ex VE VESPUR Es Re Px senin PR ENS 7 3 Impobtant InstrictiOHs ess isevisavi x3 8 Sel OGG Ml DIO HB eU nee no nan agan DSL CRURA IPSI UNAM IE M UIN 8 ORAN CO RR ERROR C H 8 3 3 Appropriate Use Held of AD DUICAUION 8 SA Ho E Tm 8 3 5 EXCLUSION oT Acadent 8 1 8 0 8 3 6 Liabil
5. The type label product name serial number of your KBox A 201 A 202 system are located on the bottom side of the device refer to Fig 1 and Fig 11 pos 1 G kontron Type KBox A 201 Rev 0 9 0 Part Number WITH Li n ME I Serial Number il TI 0714000000050757 Input 6 5V 32V typ 24V 3A max Fig 1 Type label www kontron com 7 System Overview KBox A 201 A 202 User s Guide Version 1 0 7 System Overview The KBox A 201 A 202 expands the Kontron line of computers KBox Series It is a highly scalable and flexible industrial computer The scalability performance is achieved through the use of the Computer on Module SMARC sXBT KBox A 202 and SMARC sXQU KBox A 201 This is based on Intel s Quark or Bay Trail platforms and is available in different variants rs Refer to the information and technical data in the user manual of the installed SMARC sXOU sXBT Module The user s manual of the installed SMARC sXOU sXBTi Module can be downloaded from our web page www kontron com Search for the name of the installed module The wartungsfrei design of the KBox A 201 A 202 includes a fanless battery free and soldered memory memory down conception which makes the KBox to the ideal all Lockable Box PC for the industrial environment Based on this technology Kontron s IoT ready KBox A 201 A 202 increases the flexibility serviceability and cost efficiency for various applications such as ind
6. DC power Input Connector erni kk hak Ran RN PR RN SA na 19 Fige 10 Detail Reset esa Data RT 20 Fig 11 Right side of the ma naa Bean as 21 Fig 12 Lettsideof the KBox A 201 A 202 SYSTEM sanassnda kamen an sonia In banana na ana 21 Fig 13 Top side of the KBox A 201 A 202 system o oooW WW W WWW WoWo WWoWoWoWoWoWo mm mann 21 Fig 14 Bottom side of the KBox A 201 A 202 system mmm 21 Fig 15 Rear side of the KBox A 201 A 202 system with vertical mounting plate oooWoWoWWoWoWoWoWo Wo 22 PIs Oe DIN Ram ON on A E 23 BA NI ne NN 23 Fig 18 Keep out area for mounting around KBox A 201 A 202 side view with optional antenna 26 Fig 19 Keep out area for mounting around KBox A 201 A 202 front view with vertical mounting bracket 27 nu 208 aa 28 Fig 21 Cabling the Phoenix power plug shown with optional ferrules oo mn 28 Fig 22 Dimensions front without vertical mounting plate oo WoWoWoWoWoWooWoW WWW Jan 34 Fig 23 Dimensions top sidewithout vertical mounting brackets oo ooWoWoWoWWWoWoW mma 34 Ba USE Sid na Mn an na an Pn D UA He dUNMIE 35 Fig 25 Dimensions rear side with vertical mounting Plate oo Wo WoWoWoWoWoWoWoWoW WWW maan 35 Fig 26 Dimensions detail aic T
7. On M 25 Sem E M 26 D2 WG POW REO IMMO D DES 28 28 TO Starting 29 10 1 tE DC Main Po er aa 29 10 2 Installing Ubuntu 14 04 ETSTKBOX A 202 ON NA Lomoo naas aman 30 10 2 1 Preparing USB Installation Me Ba 30 10 2 2 Seca p the SMARC Sl BOBO Man Ma Ne 30 10 2 3 Installing bbb 31 11 Maintenance and Cleaning 2 vo Yo PPAR 32 12 Technical Spec ica ERES e am VETVA Ree SOR Pa EE EPEUS 33 12 1 Mechanical PAN ana fasi quad op Mada me IN ne 34 12 1 1 Mechanical Specifications of the KBox A 201 A 202 with DIN rail clip eese WWW aa 34 12 1 2 Mechanical Specifications of the KBox A 201 A 202 with Vertical Mounting Plate eese 35 12 2 Environmental 5 DOT COH ia en ea PI aUa sende 36 12 3 CE Direchves and Standards ea Rn en os Ian an 37 13 Standard Interfaces Pin Assignments co moooo o o oomo coooooooooooooomo deionmUmooomonensnsnandansnannannasnaninn 38 13 1 X101 Power Input Con etis as ab ai 38 13 1 2 X 110 Serial Interface COM alan au as an
8. card drive selected Then click on Install now Click on continue at the Write the changes to disk screen Select desired location on the next screen and click continue Choose required keyboard location and click continue enter user name and password Then click continue Wait for installation completion Reboot If required install Ubuntu 14 04 KEAPI package for Kontron SMARC sXBTi www kontron com 11 Maintenance and Cleaning KBox A 201 A 202 User s Guide Version 1 0 11 Maintenance and Cleaning Eguipment from Kontron reguires only minimum servicing and maintenance for proper operation Q For light soiling clean the KBox A 201 A 202 with a dry cloth Carefully remove dust from the surface of the cooling fins of the chassis using a clean soft brush LJ Stubborn dirt should be removed using a mild detergent and a soft cloth Ss Do not use steel wool metallic threads or solvents like abrasives alcohol acetone or benzene for cleaning the KBox A 201 A 202 www kontron com 12 Technical Specification KBox A 201 A 202 User s Guide Version 1 0 12 Technical Specification Installed COM Express Module Baseboard with SMARC sXOUI module Baseboard with SMARC sXBTi module and Baseboard Intel amp QuarkTM X1011 Intel amp AtomTM E3845 8GB onboard Micro SD 16GB onboard Micro SD optional Interfaces 1x Ethernet 10 100 1000 Mbit s 2x Ethernet 10 100 1000 Mbit s u 1x Ethernet 10 100 Mbit
9. corresponding power wires not included p p 4 3 Before using your system become familiar with the system components and check that everything is connected properly Following a proper cabling procedure will prevent a false power on condition which could result in unit operational failure Also itis recommended that the last connections attached to the system should be the power wires ERES The KBox A 201 A 202 must be connected only to a LPS Limited Power Supply DC mains power supply complying with the requirements of EN 60950 1 It must be observed that wiring and short circuit overcurrent protection is performed according to the applicable standards regulations and respect to the electrical specification of the KBox A 201 A 202 The disconnecting device fuse circuit backer rating must be in accordance
10. op Always place drives and boards PCB assembly side down on the foam www kontron com 5 Electromagnetic Compatibility Class A Device KBox A 201 A 202 User s Guide Version 1 0 5 Electromagnetic Compatibility Class A Device 5 1 Electromagnetic Compatibility EU This product is intended only for use in industrial areas The most recent version of the EMC guidelines EMC Directive 2004 108 EC and or the German EMC laws apply If the user modifies and or adds to the equipment e g installation of add on cards the prerequisites for the CE conformity declaration safety requirements may no longer apply Warning This is a class A product In domestic environment this product may cause radio interference in which case the user may be required to take adequate measures 5 2 FCC Statement USA This equipment has been tested and found to comply with the limits for a Class A digital device pursuant to Part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in commercial environment This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instruction manual may cause harmful interference to radio communications Operation of this equipment in residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his
11. own expense 5 3 EMC Compliance Canada The method of compliance is self declaration to Canadian standard ICES 003 English This Class A digital apparatus complies with the Canadian ICES 003 French Cet appareil num rique de la class A est conforme la norme NMB 003 du Canada www kontron com 6 Shipment and Unpacking KBox A 201 A 202 User s Guide Version 1 0 6 Shipment and Unpacking 6 1 Unpacking Proceed as follows to unpack the unit 1 Remove packaging Do not discard the original packaging Keep it for future relocation Check the delivery for completeness by comparing it with your order Please keep the associated paperwork Tt contains important information for handling the unit Check the contents for visible shipping damage 9m ou TI If you notice any shipping damage or inconsistencies between the contents and your order please contact Kontron for help and information 6 2 Scope of Delivery 6 2 1 Standard 1 KBox A 201 A 202 corresponding to the ordered system configuration L Power connector Phoenix FMC 1 5 2 ST 3 5 2 pin plug 1 General Safety Instructions for IT Equipment 6 2 2 Optional Parts L Bracket for wall mounting Ld DIN rail mounting clip Mini PCIe WiFI card always factory installed if orderd with two antennas enclosed www kontron com 6 Shipment and Unpacking KBox A 201 A 202 User s Guide Version 1 0 6 3 Type Label and Product Identification
12. s with IEEE1588 support with IEEE1588 support 2x USB 2 0 2x USB 2 0 1x HDMI Port 1x COM 1 RS232 1x COM 1 RS232 1x COM 2 RS232 1x COM 3 RS485 ne iram side Reset button PWR Reset button PWR DCIN Connector 2 pin DCinput connector 2 pin DCinput connector at the front side Protection Class IP20 IP20 Rated Voltage range 24 V DC 10ms hold up 24 V DC 10ms hold up www kontron com 12 Technical Specification KBox A 201 A 202 User s Guide Version 1 0 12 1 Mechanical Specifications KBox A 201 A 202 with KBox A 201 A 202 vertical mounting plate with DIN rail clip dimensions in vertical position dimensions in lying desktop position 99 5 mm 5 43 99 5 mm 5 51 Weight Approx 1 0 kg 10 47 lbs Approx 1 0 kg 10 47 lbs without packaging expansions Chassis Cooling fins black Chassis steel sheet light grey RAL 7035 Side with External Interfaces trim strips traffic grey RAL 7043 12 1 1 Mechanical Specifications of the KBox A 201 A 202 with DIN rail clip USB2 0 ETH T Antenna 00 99 5 Fig 23 Dimensions top sidewithout vertical mounting brackets www kontron com 12 Technical Specification KBox A 201 A 202 User s Guide Version 1 0 12 1 2 Mechanical Specifications of the KBox A 201 A 202 with Vertical Mounting Plate Fig 24 Dimensions left side www kontron com 9 O N 2 IS e Fig 25 Dimensions rear side with ve
13. with the wire cross section and the rated current of the KBox A 201 A 202 De 3 The wires used for power connections must be clearly marked to ensure that they will be proper connected to the DCIN connector of the KBox A 201 A 202 and to the main power source corresponding to signals marked Refer to Fig 9 and Fig 20 In addition the cables must have some form of support so as to minimize the strain on the unit s connectors To connect the KBox A 201 A 202 to a corresponding DC main power supply please perform the following steps 1 Ensure that the DC power source is switched off via a disconnecting device circuit breaker in order to ensure that no power is flowing from the external DC power source during the connection procedure 2 Connect the Phoenix power terminal prepared as described in the subsection 9 2 1 Cabling to the DC input connector Fig 8 and Fig 9 marked X101 of the KBox A 201 A 202 The DC input connector is located on the front side and is marked 24V 3 Connectthe other ends of the DC power wires to the connections of the DC main power supply Pay attention to the polarity of the connections 4 Switch on the disconnecting device circuit breaker in order to apply voltage to the terminals of the power wires When powered on the KBox A 201 202 starts up a
14. 12 Technical Specification www kontron com 7 3 Important Instructions KBox A 201 A 202 User s Guide Version 1 0 3 Important Instructions Prior performing any installation or commissioning work with the device this manual must be read carefully to become familiar with the device The general safety instructions and information apply to all Kontron eguipment for industrial control applications This manual provides important information reguired for the proper operation of the KBox A 201 A 202 This chapter contains instructions which must be observed when working with the KBox A 201 A 202 3 1 Obligation of Diligence The operator must ensure that industrial PCs of the KBox Series are only used in control cabinet environments the operation manualis understood and the personnel has the necessary authorization and regularly training about relevant standards regulations and instructions Further the operator must ensure that the industrial PC is mounted operated and maintained according to the instruction of this manual Depending on the target application the operator must observe the current applicable national and international regulations and standards 3 2 Personnel Only personnel with appropriate qualifications trainings and authorization are permitted to install and work with the Kontron KBox A 201 A 202 industrial PC All applicable technical standards regulations and guidelines for the installation and usa
15. Box A 201 A 202 User s Guide Version 1 0 13 1 3 Serial interface COM 2 RS232 KBox A 201 SMARC sXQU only Pin Signal Name 9 pin D SUB Connector male N C COM2 RXD Receive Data COM2 TXD Transmit Data N C GND Signal Ground N C N C N C N C KO j OR 13 1 4 Serial interface COM 3 RS485 KBox A 202 SMARC sXBT only Pin Signal Name 9 pin D SUB Connector male N C N C i LE RS485 B N C GND Signal Ground N C N C N RS485 A N C e 13 1 5 X 107 X 108 USB 2 0 Port www kontron com 13 Standard Interfaces Pin Assignments KBox A 201 A 202 User s Guide Version 1 0 13 1 6 X 105 as ETH 1 and X 106 as ETH 2 Ethernet Connectors LINK ACT Speed Mbps LINK ACTIVE www kontron com 13 Standard Interfaces Pin Assignments KBox A 201 A 202 User s Guide Version 1 0 13 1 7 X 102 HDMI Port Signal Name Type A full size HDMI connector TMDS Data 2 TMDS data differential line 2 ND Ground TMDS Data 1 TMDS data differential line 2 es TA TMDS Data 1 TMDS data differential line 1 TMDS Data 0 TMDS data differential line 0 GN N M TMDS Data 2 TMDS data differential line 2 GND TMDS Data O TMDS data differential line 0 D L ehehehehe Manopo el Sopo 5 Ground HDMI differential clock 4 Not connected SC DDC Clock line DDC Data line 8 5V power ED
16. ID DDC 09 Hot Plug Detect HDMI Hot Plug Detect input 1 2 3 4 7 10 1 12 13 1 15 16 17 1 19 www kontron com 14 Technical Support KBox A 201 A 202 User s Guide Version 1 0 14 Technical Support For technical assistance please contact our Technical Support department via e mail support kontron com or web http www kontron com support and services Ensure that your reguest contains the following information e unit part number PN e serial number SN which can be found on the type label e a short description of the faulty behaviour of your system For information about Kontron products and services please visit www kontron com 14 1 Returning Defective Merchandise Please follow these steps before you return any merchandise to Kontron 1 Download the corresponding form for returning a device with an RMA No RMA Return of Material Authorization from our website http www kontron com support and services RMA Information contact our Customer department to obtain an RMA No e mail support kontron com 2 Ensure that you have received an RMA number from Kontron Customer Services before returning any device Write this number clearly on the outside of the package 3 Describe the fault that has occurred 4 Please provide the name and telephone number of a person we can contact to obtain more information where necessary Where possible please enclose all the necessary customs document
17. al Product Safety Directive GPSD 2001 95 EC Low Voltage Directive LVD 2006 95 EC Electromagnetic EMC Directive 2004 108 EC R amp TTE Directive 2014 53 EU Compatibility EMC CE Marking CE Directive 93 68 EEC RoHS II Directives 2011 65 EU Information technology equipment Safety Part 1 General requirements EN 60950 1 2006 A11 2009 A12 2011 A1 2010 AC 2011 IEC 60950 1 ed 2 am1 am2 Harmonized Standards Generic standards Emission standard for industrial environments Emission EN 55011 Class A Radiated and Conducted Emissions EN 55032 2012 AC 2013 Class A EN 61000 6 4 EN 301 489 17 EN 301 489 1 Generic standards Immunity for industrial environments Immunity EN 61000 6 2 EN 301 489 17 EN 301 489 1 U S A Canada FCC CFR 47 Part 15 www kontron com 13 Standard Interfaces Pin Assignments KBox A 201 A 202 User s Guide Version 1 0 13 Standard Interfaces Pin Assignments Low active signals are indicated by a minus sign 13 1 1 X 101 Power Input Connector Pin Signal Name 2 pin POWER SUBCON female 1 OV Ground 2 424N DC Input 13 1 2 X 110 Serial Interface COM 1 RS232 Pin Signal Name 9 pin D SUB Connector N C COM1 RXD Receive Data COM1 TXD Transmit Data N C GND Signal Ground N C COM1 RTS COM1 CTS N C 9 N eo O N Do uU Rr Ut ro www kontron com 13 Standard Interfaces Pin Assignments K
18. ble in the configurations described in this manual chapter 12 Technical Specification If you are interested in a different customer specific configuration feel free to contact Kontron and ask for your requirements Contact information can be found on our web site www kontron com www kontron com 7 System Overview KBox A 201 A 202 User s Guide Version 1 0 Ina Fig 2 Bottom side view BANI LA da S UN U Fig 3 Right side view Fig 4 Front side view config with vertical Fig 5 Left side view mounting plate Sa sr Fig 6 Top side view geese eee Fig 7 Rear side view www kontron com 7 System Overview KBox A 201 A 202 User s Guide Version 1 0 7 3 Front Side of KBox A 201 A 202 X204 CAN bus Antena ie j 43 Reset button X106 ETH X105 ETH Antenna 2 X103 X104 USB 2 0 X102 HDMI X101 24V DC A E Li i n i ntenna 1 X201 RS232 Fig 8 Front view of KBox A 201 www kontron com 7 System Overview KBox A 201 A 202 User s Guide Version 1 0 7 3 1 X101 Power Input Connector The 2 pin connector X101 Fig 8 Fig 9 provides the power connection of the KBox A 201 A 202 to the appropriate DC main power supply For pin assignments refer to the subsection 13 1 1 The external cable connector is a Phoenix FMC 1 5 2 ST 3 5 2 pin plug This power plug is delivered a
19. ecting power circuits of different devices cause no electrical hazards 4 1 Electrostatic Discharge ESD A sudden discharge of electrostatic electricity can destroy static sensitive devices or micro circuitry Proper packaging and grounding techniques are necessary precautions to prevent damage Always take the following precautions 1 Transport boards in static safe containers such as boxes or bags 2 Keep electrostatic sensitive parts in their containers until they arrive at the ESD safe workplace 3 Always be properly grounded when touching a sensitive board component or assembly 4 Store electrostatic sensitive boards in protective packaging or on antistatic mats 4 1 1 Grounding Methods The following measures help to avoid electrostatic damages to the device 1 Cover workstations with approved antistatic material Always wear a wrist strap connected to workplace as well as properly grounded tools and equipment Use anti static mats heel straps or air ionizes to give added protection Always handle electrostatic sensitive components by their edge or by their casing Avoid contact with pins leads or circuitry Turn off power and input signals before inserting and removing connectors or connecting test equipment Keep work area free of non conductive materials such as ordinary plastic assembly aids and styrofoam Use field service tools such as cutters screwdrivers and vacuum cleaners which are conductive mox os
20. ects the technical status of the products by Kontron at the time of printing 2015 by Kontron Europe Printing and duplication even of sections is only permissible with the express approval of Kontron Europe GmbH Lise Meitner Str 3 5 86156 Augsburg Germany 6 www kontron com 2 Introduction KBox A 201 A 202 User s Guide Version 1 0 2 1 Symbols used in this Manual nnnm n aa na This symbol indicates the danger of injury to the user or the risk of damage to the product if the corresponding warning notices are not observed H a a nena This symbolindicates that the product or parts thereof may be damaged if the corresponding warning notices are not observed e unm Hn This symbol indicates general information about the product and the user manual This symbol indicates detail information about the specific product configuration ly This symbol precedes helpful hints and tips for daily use Mew ee ee ee eee 2 2 Information about the System Designation and Description in this Manual This manual includes description and specifications for the KBox C 101 Family product line 2 2 1 Product Variants of the KBox A 200 Family eee eee uu KBox A 201 Equipped with SMARC sXOU processor module KBox A 202 Equipped with SMARC sXBTi processor module For the different KBox A 201 A 202 configurations refer also to chapter
21. ennas are installed at the front side Fig 8 Antenna 1 and Antenna 3 The Antenna 2 connector is intended for future use only 7 6 3 1 WLAN WiFi Antenna During the installation of the KBox A 201 A 202 the provided system antennas Fig 17 will be screwed onto the RP SMA connectors Fig 8 Antenna 1 and Antenna 3 ofthe system The antennas may be tilted and rotated in the appropriate positions to get the optimal transmission and reception quality Fig 17 WLAN WiFi antenna 1 Reverse RP SMA antenna connector 2 Hingefor positioning the antenna www kontron com 8 Thermal Considerations KBox A 201 A 202 User s Guide Version 1 0 8 Thermal Considerations 8 1 Available Processors Please refer to the chapter 12 Technical Specification The list of processors is not complete and may be extended over the product lifetime 8 2 Convection Cooling The applied cooling method provides adequate cooling of the device during operation and performs a one way thermal transfer to the chassis Three sides of the KBox A 201 A 202 consist of a compact aluminum chassis with cooling fins The cooling fins provide heat dissipation during operation 3 To provide sufficient heat dissipation for the cooling of the KBox A 201 A 202 never cover the cooling fins of the chassis Do not place any objects on the device 8 3 Minimum System Clearance To provide a maximum of airflow around the box minimum distances to
22. ge of the device must be understood and followed Further accident prevention regulations and directives must be observed Every user of this system must be familiar with the instructions described in this manual 3 3 Appropriate Use Field of Application The KBox A 201 A 202 is to be used in control cabinet applications only Necessary fire enclosures and similar safety measures are to be provided by the control cabinet The operator must ensure that the place of installation complies with applicable national and international standards and regulations 3 4 Warranty Note Due to their limited service life parts which by their nature are subject to a particularly high degree of wear wearing parts are excluded from the warranty beyond that provided by law This applies e g to buffer battery storage media like SD cards 3 5 Exclusion of Accident Liability Obligation Kontron shall be exempted from the statutory accident liability obligation if the user fails to observe the included document General Safety Instructions for IT Equipment the hints in this manual or eventually the warning signs label on the device 3 6 Liability Limitation Exemption from the Warranty Obligation In the event of damage to the device caused by failure to observe the included document General Safety Instructions for IT Equipment in this manual or eventually the warning signs label on the device Kontron shall not be required to honor the warranty even d
23. ion Instructions and the outline dimensions in the subsection 12 1 2 Mechanical Specifications of the KBox A 201 A 202 with Vertical Mounting Plate 1 Vertical mounting plate 2 Key holes on the mounting plate 3 Screws that secure the mounting plate to the chassis of the KBox A 201 A 202 Fig 15 Rear side of the KBox A 201 A 202 system with vertical mounting plate 3 The vertical mounting plate is factory installed when KBox A 201 A 202 was ordered with vertical mounting plate If the vertical mounting plate was ordered later and is to be mounted subsequently first remove the rear panel of the KBox A 201 A 202 Do not mount the vertical mounting plate on top of the rear panel www kontron com 7 System Overview KBox A 201 A 202 User s Guide Version 1 0 7 6 2 DIN Rail Clip Option For DIN Rail mounting of the KBox A 201 A 202 a DIN Rail clip can be ordered refer to subsection 6 2 2 Optional Parts If ordered you can adopt your system for mounting to a DIN Rail On the access cover Fig 11 pos 7 there are provided tapped holes for mounting the optional DIN Rail clip in vertical or horizontal orientation Fig 16 Fig 16 DIN Rail clip 7 6 3 WiFi WLAN Option Depending on the ordered system configuration the KBox A 201 A 202 system can be equipped with WiFi hardware If you have ordered a system configuration including WLAN two Reverse RP SMA connectors for screwing on the provided WLAN ant
24. its protective enclosure while it is not used for operational purposes unless it is otherwise protected Prior any installation work ensure that there are no live wires on the installation site Do not handle the device if there is any damage visible Do not operate the KBox A 201 A 202 with foreign objects inside the chassis Further do not insert any retrieval device into the device while it is connected to power Kontron rejects all liability for any and all damages resulting from operation of the unit with foreign objects inside the chassis The KBox A 201 A 202 has to be installed and operated only by trained and qualified personnel Only personnel with appropriate qualifications trainings and authorization are permitted to install and work with the Kontron KBox A 201 A 202 This device shall only be installed in or connected to systems that fulfill all necessary technical and specific environmental requirements The unit must be placed such that there is sufficient space in front of it for connecting the cables to the 1 0 interface connectors and for operating the power button Leave sufficient free space around the unit to prevent the device from possibly overheating To ensure proper operation we recommended free space as specified in Fig 18 and Fig 19 Refer also to section 12 1 2 Mechanical Specifications The KBox A 201 A 202 must be firmly attached to a clean flat and solid mounting surface Use proper fastening material
25. ity Limitation Exemption from the Warranty Obligation oo ooWooWooWoW WWW mma 8 4 General Safety Instructions Roa eaae aa Us 9 A Te Fleerrosiane Dites re ES ln Rona 10 Ze Me inn 10 5 Electromagnetic Compatibility Class A Device cocoooooooooooooooooooooo ooooooo ooooooooo oo o o ooooo ooooooo oo 11 SL Electromagnetic Compatibility EL aset 11 Fe e MeN SP Mo oa sommes oe sono ee sees nana ok 11 5 BG Compliance aa ea E 11 6 SHIPMENT ANG Unpacking sisi manis a EE NERVES NOR pa MERE AF UR Io ERA ERA S o RAE NA TER RR AER AAN OnusKa 12 o T an 12 smesso UU Lem 12 HQ 12 ERA 2s OOM a Pan ea Non na 12 Peel ea an E 13 rOMVEEUIUI 14 PUN 1 rce n 15 LA NB RIEC BUET RTI c Um 15 YAA System Expansion TN TA 16 Toe Front SId OF KBOX A20 Lu 18 T3 ALO DUE Lonne TO las en
26. long with the KBox A 201 A 202 Please observe the section 10 1 Connecting to DC Main Power Supply The mating connector is a Phoenix MC 1 5 2 G 3 5 connector Signal Name 0 V Ground 24 V DC Fig 9 X101 24 V DC power input connector The unit is only completely disconnected from the DC mains when the power is removed For preparing the power cable for the KBox A 201 A 202 by connecting appropriate wires to the Phoenix power terminal refer to subsection 9 2 1 Cabling 7 3 2 X102 HDMI KBox A 202 only This is a HDMI compliant interface realized using a HDMI 1 1 connector An external digital display can be connected to the HDMI connector X102 Fig 8 For pin assignment refer to subsection 13 1 7 X 102 HDMI Port 7 3 3 X103 X104 USB 2 0 The KBox A 201 A 202 provides two USB 2 0 1 1 interfaces These connectors X103 X104 Fig 8 allow connection of USB compatible devices to the system For pin assignment refer to subsection 13 1 5 7 3 4 X105 X106 Ethernet Connectors ETH KBox A 201 KBox A 202 Gigabit Ethernet 10 100 1000 MBit s Gigabit Ethernet 10 100 1000 MBit s Fast Ethernet 10 100 MBit s Gigabit Ethernet 10 100 1000 MBit s The connectors are standard 8 pin RJ45 type connectors Fig 8 with status LEDs Q Activity link green link up green blinking activity L Speed off green yellow 10 100 1000 MBit s For pin assignment refer to subsection 13 1 6 www kont
27. n of downloaded iso image in the text box From the Type drop down menu select USB Drive Click OK to proceed After you complete either of the steps above you are ready to boot your board with the USB flash drive and start the installation process 10 2 2 Setting up the SMARC sXBT Board Connect a HDMI monitor USB installation media with bootable Ubuntu image and power supply Connect a network cable this is optional but recommended Recheck the connection verify twice that it has connected properly and then turn the power ON Press F2 during a boot to get to the BIOS menu then select Advanced gt OS Selection Linux Advanced gt South Cluster Configuration LPSS amp SCC Configuration eMMC DDR50 support gt Enable eMMC HS200 support gt Enable Boot Make USB HDD to be first in the boot list Make eMMC Card0 to be second www kontron com 10 Starting Up KBox A 201 A 202 User s Guide Version 1 0 10 2 3 Press F10 to save new configuration and reboot the system the display will show Ubuntu grub menu Select Install Ubuntu Installing Ubuntu Select desired language On next scree DO NOT select Download updates while installing check box You can download required updates after Ubuntu OS installation completion On next screen select Erase disk and install Ubuntu option On next screen be sure that MMC SD
28. on 13 1 4 www kontron com 7 System Overview KBox A 201 A 202 User s Guide Version 1 0 7 4 Left and Right Side View N iMIEEEDEM m M i ial Fig 11 Right side of the KBox A 201 A 202 system Fig 12 Left side of the KBox A 201 A 202 system Legend for Fig 11 Fig 12 Fig 13 and Fig 14 1 Type label 6 Cooling fins on the left side of the U shaped chassis 4x torx screws 3x8 that secure the access cover 7 Threaded holes for mounting the DIN rail mounting clip Upper side of the mounting plate with key holes 8 Cooling fins on the top side of the U shaped chassis 9 Lower side of the mounting plate with key holes Cooling fins on the bottom side of the U shaped chassis im 5 W N Access cover 10 Interface side 7 5 Top and Bottom Side View Fig 13 Top side of the KBox A 201 A 202 system Fig 14 Bottom side of the KBox A 201 A 202 system 3 To provide sufficient heat dissipation for the cooling of the KBox A 201 A 202 platform never cover the cooling fins of the chassis Do not place any objects onto the device www kontron com 7 System Overview KBox A 201 A 202 User s Guide Version 1 0 7 6 Rear Side View 7 6 1 Rear Side View of the KBox A 201 A 202 with Vertical Mounting Bracket The KBox A 201 A 202 is designed for wall mounting in vertical position inside of a control cabinet Please observe the mounting instructions included in the section 9 Installat
29. ormation for mounting in the section 12 1 2 Mechanical Specifications of the KBox A 201 A 202 with Vertical Mounting Plate or refer to the drawings for KBox A 201 A 202 on our web site The drawings can be downloaded from our web site www kontron com by selecting the product name 3 For a sufficient air circulation around the device we recommend not to mount or operate any other devices within the Keep Out Area around the KBox A 201 A 202 refer to the red marked area in Fig 18 and Fig 19 130 KEEP OUT AREA for cable connections Fig 18 Keep out area for mounting around KBox A 201 A 202 side view with optional antenna www kontron com 9 Installation Instructions KBox A 201 A 202 User s Guide Version 1 0 150 KEEP OUT AREA air circulation 150 58 Fig 19 Keep out area for mounting around KBox A 201 A 202 front view with vertical mounting bracket www kontron com 9 Installation Instructions KBox A 201 A 202 User s Guide Version 1 0 9 2 DC Power Connection The KBox A 201 A 202 is connected by a Phoenix connector to a DC power source via a DC power supply wiring only the Phoenix power plug terminalis included The KBox A 201 A 202 is delivered with a DC power plug terminal 2 pin Phoenix FMC 1 5 2 ST 3 5 2 pin plug For DC connection prepare the connecting wires using the supplied Phoenix plug terminal Fig 20 Phoenix power plug terminal 1 3 pin Phoenix
30. plug terminal 3 Location for inserting the 24V 2 Location for inserting the ground wire Ple 4 Cable release button 9 2 1 Cabling For the pin assignment Phoenix power plug terminal refer to the subsection 7 3 1 X101 Power Input Connector 1 2 3 Cut the reguired length two isolated wires 1 mm AWG18 and strip each end 5 7 mm Twist the striped wire ends Optionally you can provide them with ferrules The power connector is equipped with push in spring clamps Insert the wires into the corresponding clamp of the Phoenix plug terminal Make sure that you have the right polarity of the connection refer to Fig 9 Fig 20 Fig 21 For releasing removing the cable from the connector press in the orange release button using a screw driver and pull out the cable Fig 20 pos 4 menn Ee SS Fig 21 Cabling the Phoenix power plug shown with optional ferrules www kontron com 10 Starting Up KBox A 201 A 202 User s Guide Version 1 0 10 Starting Up 3 The KBox A 201 A 202 must be only operated with the nominal voltage of 24V DC of type SELV For details refer to the chapter 12 Technical Specification 10 1 Connecting to DC Main Power Supply The DC input connector Fig 8 and Fig 9 marked X101 is located on the front side of the KBox A 201 A 202 The KBox A 201 A 202 will be connected to a DC main power supply via the supplied Phoenix power plug terminal see Fig 20 and
31. position KBox A 201 A 202 configuration with DIN rail clip attached to the right side cover of the chassis mounted inside a control cabinet www kontron com 7 System Overview KBox A 201 A 202 User s Guide Version 1 0 3 When powering on the KBox A 201 A 202 make sure that the cooling fins of the chassis Fig 12 Fig 13 and Fig 14 pos 6 are not obstructed covered by any objects To provide sufficient heat dissipation by the cooling of the device do not cover the cooling fins of the KBox A 201 A 202 Do not place any objects on the device When installing the system please note the clearance recommendation in the section 9 1 System Mounting 7 1 RTC The KBox A 201 A 202 comprises a chipset internal RTC To provide a valid date and time when no power is connected to the KBox A 201 A 202 the RTC is equipped with a goldcap buffer 7 1 1 RTC Buffer Time The RTC buffer time is depending of the ambient temperature If the time is not valid this is indicated by a status bit in the RTC registers get the maximum buffer time it is necessary to have the system a certain time powered on This ensures that the buffer capacitors are fully loaded The buffer time depends on the ambient temperature and on how long the box is connected to its power supply www kontron com KBox A 201 A 202 User s Guide Version 1 0 7 System Overview 7 2 System Expansion Capabilities The KBox A 201 A 202 is availa
32. ron com 19 7 System Overview KBox A 201 A 202 User s Guide Version 1 0 7 3 5 Reset Button If your system no longer reacts you need to restart the KBox A 201 A 202 platform Press the reset button to restart your system Use a pointed object e g a pencil to press the recessed reset button 1 Frontbezel 2 Reset button recessed Fig 10 Detail Reset button When a reset is performed all data is erased from the internal memory The system restarts without the need to switch the computer off and on again 3 Data might be lost when a restart is executed by pressing the reset button 7 3 6 X201 Serial Port COM 1 This interface X201 Fig 8 is provided as a 9 pin D SUB connector it is RS232 configured and allows the connection of a serial peripheral For pin assignment refer to subsection 13 1 2 7 3 7 X202 Serial Port COM 2 Option KBox A 201 SMARC sXQU only This interface X204 Fig 8 is provided as a 9 pin D SUB and allows the connection of a serial peripheral It is designed to support RS232 serial communication For pin assignment refer to subsection 13 1 3 This port is internally terminated with a termination resistor 12022 7 3 8 X203 Serial Port COM 3 Option KBox A 202 SMARC sXBT only This interface X204 Fig 8 is provided as a 9 pin D SUB and allows the connection of a serial peripheral It is designed to support RS485 serial communication For pin assignment refer to subsecti
33. ron com 9 4 General Safety Instructions for IT Eguipment KBox A 201 A 202 User s Guide Version 1 0 Additional general safety instructions for DC power supply circuits L A sufficient dimensioning of the power cable wires must be selected according to the maximum electrical specifications on the product label as stipulated by EN60950 1 or VDEO100 or EN60204 or UL508 regulations LI The devices do not generally fulfill the requirements for centralized DC power systems UL 60950 1 Annex NAB D2 and therefore may not be connected to such devices U The following section is not applicable for the KBox A 201 A 202 To guarantee safe operation of devices with DC power supply voltages larger than 60 volts DC or a power consumption larger than 240 VA please observe that e the device is set up installed and operated in a room or enclosure marked with RESTRICTED ACCESS if there are no safety messages on product as safety signs and labels on the device itself e no cables or parts without insulation in electrical circuits with dangerous voltage or power should be touched directly or indirectly e a reliable protective earthing connection is provided e a suitable easily accessible disconnecting device is used in the application e g overcurrent protective device if the device itself is not disconnectable e a disconnect device if provided in or as part of the equipment shall disconnect both poles simultaneously e interconn
34. rtical mounting plate Jy IT 0 Fig 26 Dimensions detail key hole 12 Technical Specification KBox A 201 A 202 User s Guide Version 1 0 12 2 Environmental Specifications BENI KBox A 201 Standard Version KBox A 202 Standard Version Thermal Management Operating Temperature Storage Transit Temperature Relative Humidity Operating Transit Max Operation Altitude Max Storage Transit Altitude Operating Shock Non operating Transit Shock Operating Vibration Non operating Transit Vibration Fanless cooling Fanless cooling 40 C 70 C 40 158 F 40 C 60 C 40 140 F 40 C 85 C 40 F 185 F 40 C 85 C 40 F 185 F 93 40 C non condensing 93 40 C non condensing acc to IEC 60068 2 78 acc to IEC 60068 2 78 2 000 m 6 560 ft 2 000 m 6 560 ft 10 000 m 32 810 ft 10 000 m 32 810 ft 15 G 11 ms half sine 15 G 11 ms half sine acc to IEC 60068 2 6 acc to IEC 60068 2 6 50 G 11 ms half sine IEC 60068 2 27 50 G 11 ms half sine IEC 60068 2 27 no HDD and add on cards no HDD and add on cards 10 500 Hz 2 G IEC 60068 2 6 10 500 Hz 2 G IEC 60068 2 6 10 500 Hz 3 G IEC 60068 2 6 10 500 Hz 3 G IEC 60068 2 6 www kontron com 12 Technical Specification KBox A 201 A 202 User s Guide Version 1 0 12 3 CE Directives and Standards CE Directive Elektrical Safety Gener
35. s and invoices 5 When returning a device e Pack it securely in its original packaging e Enclose a copy of the RMA form with the consignment Corporate Offices Europe Middle East amp Africa North America Asia Pacific Lise Meitner Str 3 5 14118 Stowe Drive 17 Building Block 1 ABP 86156 Augsburg Poway CA 92064 7147 188 Southern West 4th Ring Germany USA Beijing 100070 P R China Tel 49 0 821 0 Tel 1 888 294 4558 Tel 86 10 63751188 Fax 49 0 821 111 Fax 1 858 677 0898 Fax 4 86 10 83682438 info kontron com info us kontron com info us kontron cn www kontron com
36. s suitable for the mounting surface Ensure that the mounting surface type and the used mounting solution safely support the load of the KBox A 201 A 202 and the attached components Please follow the local national regulations for grounding The voltage feeds must not be overloaded Adjust the cabling and the overcurrent protection to correspond with the electrical figures indicated on the type label The type label is located on the access cover of the system Itis recommended that the last cable attached to the system should be the power cable Refer to the section 9 2 DC Power Connection and chapter 10 Starting Up www kontron com 9 Installation Instructions KBox A 201 A 202 User s Guide Version 1 0 9 1 System Mounting In order to adapt the KBox A 201 A 202 for mounting Kontron offers different mounting solution such as 1 KBox A 201 A 202 configuration with vertical mounting plate for installation into a control cabinet or to a wall 1 KBox A 201 A 202 for DIN Rail mounting into a control cabinet Depending on the ordered KBox A 201 A 202 configuration your system is supplied with the corresponding mounting plate or DIN Rail clip The key holes of the vertical mounting plate Fig 15 pos 2 allow you to mount the KBox A 201 A 202 in vertical position Prepare the mounting surface with four screws and if necessary anchors corresponding to the mounting surface type fire resistant material Please refer to the inf
37. se to heat sources or damp places Make sure the system is well ventilated Q Only devices or parts which fulfill the requirements of SELV circuits Safety Extra Low Voltage as stipulated by IEC 60950 1 may be connected to the available interfaces L Before opening the device make sure that the device is disconnected from the mains L Switching off the device by its power button does not disconnect it from the mains Complete disconnection is only possible if the power cable is removed from the wall plug or from the device Ensure that there is free and easy access to enable disconnection L The device may only be opened for the insertion or removal of add on cards depending on the configuration of the system This may only be carried out by qualified operators L Ifextensions are being carried out the following must be observed e all effective legal regulations and all technical data are adhered to the power consumption of any add on card does not exceed the specified limitations e the current consumption of the system does not exceed the value stated on the product label LJ Only original accessories that have been approved by Kontron can be used L Please note safe operation is no longer possible when any of the following applies e the device has visible damages or e the device is no longer functioning In this case the device must be switched off and it must be ensured that the device can no longer be operated www kont
38. surrounding parts must be observed please refer to the chapter 9 1 System Mounting and Fig 18 8 4 Maximum Temperatures The maximum system ambient temperature depends mostly on the power consumption of the processor and the chipset For the temperature evaluation a specialized tool from Intel was used to set the processor to a defined workload Depending on the power consumption one or more cores were set to 75 workload This includes the graphics core if applicable KBox A 202 The tool also handles the usage of the Turbo Mode of certain processor types The processor utilization depends highly on the software used Software using multicore feature will run on several cores whereas standard software will only utilize one core www kontron com 9 Installation Instructions KBox A 201 A 202 User s Guide Version 1 0 9 Installation Instructions The KBox A 201 A 202 system is designed for operating 1 installed onto a wall or within a control cabinet by use of the vertical mounting plate 1 installed within a control cabinet by use of the DIN Rail mounting clip Whenever possible unpack or pack this product only at EOS ESD safe work stations Where a safe work station is not quaranteed it is important for the user to be electrically discharged before touching the product with his her hands or tools This is most easily done by touching a metal part of the system chassis Do not handle this product out of
39. uring the warranty period and shall be exempted from the statutory accident liability obligation 8 www kontron com 4 General Safety Instructions for IT Eguipment KBox A 201 A 202 User s Guide Version 1 0 4 General Safety Instructions for IT Equipment Please read this chapter carefully and take careful note of the instructions which have been compiled for your safety and to ensure to apply in accordance with intended regulations If the following general safety instructions are not observed it could lead to injuries to the operator and or damage of the product in cases of nonobservance of the instructions Kontron is exempt from accident liability this also applies during the warranty period L The product must be used as specified in the product documentation in which the instructions for safety for the product and for the operator are described These contain guidelines for setting up installation and assembly maintenance transport or storage LI The on site electrical installation must meet the requirements of the country s specific local regulations L Ifa power cable comes with the product only this cable should be used Do not use an extension cable to connect the product 1 To guarantee that sufficient air circulation is available to cool the product please ensure that the ventilation openings are not covered or blocked If an air filter is provided this should be cleaned regularly Do not place the system clo
40. ustrial automation communication or transportation The KBox A 201 A 202 hardware system configuration and the robust construction with excellent mechanical stability offer the superior qualities of a computer designed for operation in harsh industrial environment It is a fanless system based on a compact U shaped aluminum chassis with cooling fins The rated voltage of the mains 24 V DC can be found on the type label The type label is located at the bottom side of the device The KBox A 201 A 202 may be optionally factory equipped with an mPCIe WLAN card for two antennas For the configuration of your KBox A 201 A 202 please follow the ordering options specified in Configuration Guides KBox Series on our web site www kontron com The following interfaces are available with the KBox A 201 A 202 Standard front panel LI 24V DC input power X101 Ld 2x Ethernet X105 X106 KBox A 201 1x Gigabit Ethernet 10 100 1000 and 1x Fast Ethernet 10 100 KBox A 202 2x Gigabit Ethernet 10 100 1000 2x USB 2 0 X103 X104 HDMI Port X102 KBox A 202 only COM 1 X201 RS 232 COM 2 X202 RS 232 KBox A201 only COM 3 X203 RS485 KBox A 202 only CANbus X204 currently not supported Reset button LDDUDUDLDULDUDZLD The device is designed to be operated in 1 vertical position KBox A 201 A 202 configuration with vertical mounting plate attached to the rear side of the chassis mounted inside a control cabinet or L vertical
41. utomatically www kontron com 10 Starting Up KBox A 201 A 202 User s Guide Version 1 0 10 2 Installing Ubuntu 14 04 2 LTS KBox A 202 only Note Ubuntu is not offered and supported by Kontron The installation consists of the following processes Preparing USB Installation Media e Setting up the Kontron SMARC Board Installing Ubuntu 10 2 1 Preparing USB Installation Media 1 Download the 64 bit VERSION OF Ubuntu 14 04 2 installation image iso source from http www ubuntu com download desktop thank you country US amp version 14 04 2 amp architecture amd64 2 Make a bootable USB to install the Ubuntu OS from an ISO image using one of the options below 2 1 Using Rufus Make a bootable Ubuntu installation using Rufus Rufus is available online at http rufus akeo ie Select correct USB Flash from the Device dropdown menu For Partition scheme and target system type select GPT partition scheme for UEFI computer This is important because SMARC sXBT only accepts a UEFI bootable image Click Create a bootable disk using and select ISO Image Click on the DVD logo next to it and choose the downloaded Ubuntu iso Click Start 2 2 Using UNetbootin Download UNetbootin from http unetbootin sourceforge net After installing run UNetbootin select the option Diskimage and from the drop down list select ISO for the type of the installation image and specify the locatio
Download Pdf Manuals
Related Search