IN-431B - Innovatek.ca
Contents
1. 17 Default Default RESET 8 ADULT OFF Load Fcatory Setting Set Parental Control 7 DEFAULTS Select reset to become factory initial setting DEFAULTS TABLE TV DISPLAY NORMAL LB ANGLE MARK ON GENERAL sETUP OSP LANGUAGE ENGLISH SPDIF OUPUT SPDIF RAM CAPTIONS ON SCR SAVER ON LAST MEMORY SPEAKER SETUP DOWNMIX STEREO DOLBY DIGITAL DYNAMIC OFF TV TYPE AUTO AUDIO ENGLISH SUBTITLE OFF PREFERENCES DISC MENU ENGLISH PARENTAL 8 ADULT PASSWORD 1379 SPECIFICATION Supply Voltage Current Consumption Signal System Discs Played TV System TV Sensitivity Audio Signal Output Characteristics Frequency Coverage IF Sensitivity S N 30 dB Frequency Coverage IF Sensitivity S N 7 20 dB Frequency Coverage IF Sensitivity S N 20 dB Monitor Screen Size Number of Pixels Color System Bluetooth specification Bluetooth profile supported Range of frequency 12V DC 11V 15V Less than10A Compositive video 1 0Vp p 732 1 DVD VIDEO Disc 5 12 cm single sided single layer 5 12 cm single sided double layer 2 Compact Disc CD DA VIDEO CD 5 12cm disc NTSC PAL 45dBB V CH25 in average 2ch amp 4ch line out 1 Frequency Response 2 S N Ratio 3 Wow and Flutter 20 Hz 20 KHz 90 dB JIS Below measurable limits For 3 Bands For 2 Bands For 2 Bands Europe Europe U S A FM FM FM 87 5to12. GREY BLACK Reh SPK REAR GREEN VIOLET REAR Lch SPK Rch SPK GREEN BLACK VIOLET BLACK Note the earth connection cable parking brake B must be connected in order for DVD pictures to be played back to the monitor If the cable has not been correctly connected the message PARKING BRAKE appears on the monitor REMOTE CONTROL 1 CLK 2 PAIR 3 STOP 4 SETUP 5 MO ST AUDIO 6 SUBTITLE LO DX 7T REDIAL 8 GOTO x 9 a gt gt 10 SEL 11 VOL VOL 12 A V gt 4 13 MENU SUB WOOFER 14 BAND OSD 15 0 MOD 16 PLAY PAUSE 17 MUTE 18 TITLE PBC 19 4 20 ANGLE 21 EQ LOUD 22 SEARCH b gt 23 ENTER qoem 9 E 99 Ht B Es Se ae 2 a s SLO 9 2 ee Cac De Kp 1 2 3 O I7 8 9 5 EE e eem Press it briefly to show hide the clock press longer to set the time Press itto use the Bluetooth function referto the page 17 Press itto stop playback press PLAY PAUSE to resume playback Press it to open the SETUP menu In radio mode press it to select STEREO or MONO mode In disc mode pre
3. stereo mode DOLBY DIGITAL SETUP c D Dolby Digital Setup DOLBY DYNAMIC Set DRC OFF 7 LAST MEMORY SETUP Select the LAST MEMORY output ON OFF 23 DYNAMIC RANGE CONTROL Select DRC and adjust the dynamic range of a Doby Digital encoded program There are 8 steps between full compression and off compression SETUP PREFERENCES SETUP PREFERENCES PAGE a a 48 J 5 145 Preference Page Preference Page TV Type PAL TV Type Audio AUTO Audio Subtitle NTSC Subtitle Disc Menu Disc Menu Parental Parental Password Password Default Default OFF Set TV standard Preferred Subtitle Language 1 TV TYPE SETUP This player can play discs recorded in either PAL or NTSC format Select NTSC format when you connected to NTSC TV Select PAL format when you connected to PAL TV Select AUTO format the player TV output format will according to the DVD disc format 80 GA Preference Page TV Type English Audio French Subtitle Spanish Disc Menu German Parental Italian Password Portuguese Default Preferred Audio Language 2 AUDIO LANGUAGE SETUP Select the preferred AUD
4. A new disc may have rough edges on its inside and outside edges lf a disc with rough edges is used the proper setting will not be performed and the player will not play the disc Therefore remove the rough edges in advance by using a ball point pen or pencil as shown on the right To remove the rough edges press the side of the pen or pencil againstthe inside and outside edges of the disc Rough spots on outside edge Ball point pen or pencil NV Rough spots oninside edge INSTALLATION NOTES Choose the mounting location where the unit will not interfere with the normal driving function of the driver Before finally installing the unit connectthe wiring temporarily and make sure itis all connected up properly and the unit and the system work properly Use only the parts included with the unit to ensure proper installation The use of unauthorized parts can cause malfunctions Consult with your nearest dealer if installation requires the drilling of holes or other modifications of the vehicle Install the unit where it does not get in the driver s way and cannot injure the passenger if there is a sudden stop like an emergency stop If installation angle exceeds 30 from horizontal the unit might not give its optimum performance 30 Avoid installing the unit where it would be subject to high temperature such as from direct sunlight or from hot air from the heater or where it would be subj
5. BG COLOR 01 BG COLOR 11 in AUTO mode the monitor of unit will change the background color automatically TV System Select In TV mode Swing the SEL knob in the direction of APS DISP to cycle through the different TV standards PAL BG PAL DK PAL I PAL MN if you are in European frequency mode you can use the VOL to select among the PAL options MU BUTTON Press it button to switch of the loudspeakers for a short period The word MUTE flashes in the display Press it again to cancel the mute function This function can also be cancelled by rotating the VOL multifunction button ANGLE BUTTON you can change the viewing angle of the operating unit Press this button up to four times in order to select the desired position 12 BASIC OPERATION 10 Pil CH 1 6 RADIO PRESET BUTTON a In Disc Playback Mode Press this button to pause playback press it again to resume playback b In Radio Mode Press this button repeatedly to preset station With this system a total of 30 stations can be stored in the memory Each band store up to six preset stations The stations might be FM1 FM2 FM3 AM1 MW1 and AM2 MW2 band The operation as below store in memory press and hold the desired memory location for several seconds the current listening station will be stored into the number location retrieve a preset station press it button repeatedly to retrieve a station which had been stored in the memor
6. DO NOT REMOVE OR DISCONNECT IT DURING PLAYBACK Itis also a good practice to remove the USB drive during disc playback 19 On Screen Display Function Press the OSD button during playback to display the contents of the current disc on the screen A Example for DVD a Press OSD forthe first time TITLE ELAPSED TT01 01 CH 01 38 0 02 06 Title Number Total Title Number Chapter Number Total Chapter Number of this Title of the disc currently being played will be shown on the screen along with the elapsed time b Press OSD for the second time TITLE REMAIN TT01 01 CH 01 38 3 24 36 c Press OSD for the third time CHAPTER ELAPSED TT 01 01 CH 01 38 0 02 56 d Press OSD for the fourth time CHAPTER REMAIN TT 01 01 CH 01 38 0 04 32 e Press OSD for the fifth time The message on the screen will be cleared B Example for VCD SVCD CD a Press OSD for the first time SINGLE ELAPSED TRACK 01 16 00 49 b Press OSD for the second time SINGLE REMAIN TRACK 01 16 02 45 c Press OSD for the third time TOTAL ELAPSED TRACK 01 16 00 60 d Press OSD for the fourth time TOTAL REMAIN TRACK 01 16 78 46 BASIC OPERATION e Press OSD for the fifth time The message on the screen will be cleared for SVCD and VCD C Example for MP3 Each time OSD is pressed the message displayed on screen changes as follows ELAPSED gt S
7. and hold to turn the unit OFF Press it briefly to select the TV Disc Radio AUX In BT Music mode In DISC mode starting playback stopping picture track Press this button to turn off the audio Press again to restore the sound to its prior volume level Display the TITLE menu thatis stored in DVD disc changing between PBC ON and PBC OFF on the VCD disc Auto store and preset scan function in radio stations Press itto adjustthe screen viewing angle See page 7 Changing ofthe view angle on multi angle DVD disc Press itto turn to equalization function In radio mode when reduce the volume to half level press itto enhance the bass effect In TV mode Press itto search TV channel automatically In DISC mode Press it to start forward rapidly Confirm the Track Chapter selected with the number key or selected with the cursor buttons on TV screen 9 REMOTE CONTROL 24 SKIP lt 4 In TV mode press it to ADD and DELETE channel In DISC mode press it to reverse rapidly 25 0 9 Numeric buttons 26 10 Tens digit select button cooperatively used with numeric buttons In Bluetooth menu it serves as the button on your mobile handset 27 RADIO PRESET Six preset memory buttons Preparing the Remote Control Inserting the Batteries 1 First push to inside as the direction indicated by the arrow See And then Remove the battery holder as the direction indicated by the arrow See 2 Replace the battery Set a new
8. battery property with side up as illustrated See 3 Insert the battery holder Push in the holder to the original position See Using the Remote Control Face the remote control towards the player front face IR mark remote control signal receiver Operation angle About 30 degree in each the direction of the front of the IR mark 10 BASIC OPERATION 1 443 8 15 11 03 dg 42570159 10 e CAR DVD VCD CD MP3 MPEG4 TV PLAYER Bluetooth 9 919 MOC 1 REL BUTTON Press the REL button to release the removable front panel Refer to see page 6 2 POWER On Off MOD BUTTON Press it to switch the device ON press and hold approximately 2 seconds to switch the device OFF During the playback mode you can press it to select an input mode by pressing repeatedly until proper one is found TV gt AUX IN gt RADIO gt DISC gt BT MUSIC If you are in USB playback mode and want to select the DISC mode press the STOP button and then press the GOTO button 3 4 VOL VOL amp SEL BUTTON Press SEL button briefly to across the sound picture mode selection menu by repeatedly pressing the SEL button you can select the individual menu items such as volume bass treble balance fader color bright contrast tint BG color and Bluetoo
9. cut off Normal LB For 4 3 TV Played back in letterbox style If connected to wide screen TV black bands appear attop and bottom of the Screen Wide For 16 9 TV Select when a wide screen TV set is connected 4 3 Ea o o oo oo D DOLBY Cc ru Z General setup page General setup page TV Display Angle Mark ON OSD Lang OFF Spdif Output Captions Screen Saver Last Memory TV Display Angle Mark OsdLang SPDIF OFF Spdif Output SPDIF RAW Captions SPDIF PCM Screen Saver Last Memory Set Angle Mark Setup SPDIF 2 ANGLE MARK DISPLAY SETUP If itis set to ON when the multi angle DVD disc is playing amp k the angle mark will appears on the screen if is setto OFF the mark will not appear 4 SPDIF OUTPUT This is to activate the audio output from SPDIF OFF mode to SPDIF RAW mode to SPDIF PCM mode 3 WE SV EA EZ General setup page General setup page TV Display TV Display
10. front panel or remote control the word DIAL NUMBER will display on the TFT then you dial the number on the remote control and then press briefly the button When you dials the wrong number press lt button to delete it End Reject a call In Bluetooth menu press the 4 button briefly on the front panel or on the remote control the TFT LCD display CALL HOOKED CALL EJECTED Redial last number In Bluetooth menu press and hold the y button approximately 2 seconds on the front panel or on the remote control the DIAL LAST CALL DIAL OUT NOW will display on the TFT LCD 17 BASIC OPERATION Adjust the Volume During conversation in progress tune the Volume switch until you reach the desired volume level Play MP3 music In Bluetooth menu press MOD to select the BT MUSIC you can play the from your mobile handset Note please make sure it support the Bluetooth A2DP profile Note a Before using the function of the Blue tooth about the unit please check your phone s instruction guide or contact phone manufacture if you are not sure if your phone supports the hands free Bluetooth function b When operating the function of blue tooth about the unit you need make your call phone and the unit successfully for one time Afterwards you only need to take on the power and the function of blue tooth will work in three minutes automatically if you want to operate the function of blu
11. to select the items and then press the ENTER to confirm You can also select the items using the corresponding number buttons and then press the ENTER to confirm F Long Press 4 RDM to play disc in random In the DVD VCD CD MP3 disc playing press the 4 RDM button on the front panel to play in random depend on the disc used for VCD MP3 WMA JPEG DISC PLAY 1 When inserting an MP3 WMA JPEG disc Ex When MP3 file is detected o 4 Current track file highlighted bar 8 00 56 04107 gt 2 Current track file number total number of tracks files in the current 2 003 112 Repeat one folder Elapsed playing time of the current track not available for JPEG disc 4 total playing time not available for CD MP3 woman 1 JPEG disc 5 Selected playback mode 6 Operation mode icon Play v m stop pause p gt forward reverse Mp3 K P 66 Mp3 new ton In stop mode use A V 9 4 onthe remote control to select the item or folder then press ENTER button to confirm Pressing REPEAT button repeatedly can select two kinds of repeat play mode 2 REP ONE Play the same song over and over again 3 REPALL Play all songs in the discover and over again In the playback use DPI or skip an item ahead or back In the playback swing the SEL knob in the direction of A V button on the front pan
12. 08 MHz 87 5t0108 MHz 87 5 to107 9 MHz 10 7 MHz 10 7 MHz 10 7 MHz 15 dBu 15 dBu 15dBu MW MW AM 522101620 KHz 522t01620 KHz 530to1710 KHz 450 KHz 450 KHz 450 KHz 40 dBu 40 dBu 40 dBu LW Optional 144 to290 KHz 450 KHz 45 dBu 4 3 Inch Wide 480 X 3 RGB X 272 pixels NTSC PAL V1 2 Class2 Headset Handsfree and A2DP profiles 2 4GHz Spectrum NOTE Specifications and design are subject to modification without notice due to improvements in technology 26 TROUBLE SHOOTING Before going through the check list check wiring connection If any of the problems persist after check list has been made consult your nearest service dealer SYMPTOM CAUSE SOLUTION If the power supply is properly The car ignition switch is connected to the car accessory No power not on terminal switch the ignition key to ACC The fuse is blown Replace the fuse Disc can not be loaded or ejected player Presence of disc inside the Remove the disc in the player then puta new one direction Inserting the disc in reverse Insert the compact disc with the label facing upward The disc is extremely dirty or defective Clean the disc or try to play a new one Temperature inside the car is too high Cool off or until the ambient temperature return to normal Television video imageappears black white The color system is set incorrectly Please switch to correct color system from menu
13. Angle Mark English Angle Mark OSD Lang French OSD Lang Spdif Output German Spdif Output ON Captions Spanish Captions Screen Saver Italian Screen Saver Last Memory Portuguese Last Memory Set OSD Language Closed Caption 3 0SD LANG TYPE SETUP Select the preferred OSD language by using the V buttons 5 CAPTIONS SETUP Activate the CAPTIONS feature by selecting ON And release this feat ure by selecting OFF SETUP EHE SPEAKER SETUP SPEAKER SETUP PAGE General setup page TV Display Angle Mark OSDLang Spdif Output Captions Screen Saver ON Last Memory OFF Screen Saver 6 SCR SAVER SETUP Select the SCR SAVER output ON OFF ai 5 General setup page TV Display Angle Mark OSD Lang Spdif Output Captions Screen Saver ON Last Memory OFF Set Last Memory State 5 Speaker Setup Page DOWNMIX LT RT STEREO Set Downmix Mode This is to activate the audio output from DOLBY AC3 5 1 DOWNMIX to 2 channel mode Select the preferred SPEAKER connection by using the cursor buttons Select the LT RT to activate the Dolby surround compatible output Select the STEREO to activate simple
14. INGLE REMAIN Multi audio Language Function For DVD Press AUDIO during playback Each time the button is pressed number of the audio soundtrack language changes on sequential order NOTES The language number is different according to the disc Some disc only contain one language soundtrack When no different language soundtrack are recorded amp will be display at screen left top corner For VCD CD Press AUDIO during playback It is possible to switch the sound between monaural and stereo sound MONO LEFT MONO RIGHT STEREO Title Menu Function For DVD If the DVD has multiple titles recorded on the disc It can select preferred title from the title menu to start playback Press TITLE during playback The title menu is display Press the cursor button shown in TV screen select preferred title by the cursor button and confirmed by ENTER key For VCD Press TITLE PBC button on the remote control while the disc is playing you can switch between PBC on and PBC off mode Multi subtitle Language Function for DVD Only Press SUBTITLE during playback Each time the button is pressed number of the subtitle language changes in sequential order Notes The language number is different according to the disc Some discs only contain one subtitle language When no different subtitle language are recorded will be displayed at screen left top corner Multi an
15. INNOVATEK IN 431B OWNER s MANUAL Mobile Video System Orer cs Pain DVD vot oL Omc CAR DVD VCD CD MP3 MPEG4 TV PLAYER REDIAL MOTORIZED SLIDE DOWN AND DETACHABLE PANEL 4 3 INCH WIDE COLOR DIGITAL SCREEN TFT CAR DVD VCD CD MP3 PLAYER WITH BLUETOOTH AM FM DIGITAL PLL TUNING RADIO MPEG4 PLAYER USB CONNECT TV TUNER Bluetooth 5 Saltety Information uo SERERE adn AN a EL PuE 2 BILIONCDQCIOJNS NNTMETEMDUUUEMMTM 3 INStAN ALON zz oer Loa eno nexu av water ew a 4 Panel Angle Adjustment nuam du nune aia NERA ema a Ec 7 Electric Connectioh rictu cena e cec M Ka ED RACER 8 Remote Control cur mo EE 9 BaSiC Operation eee I cen 11 MPS WMA JPEG Disc Play oec ree ronde eere re De nb mx n bd 15 MIPE G4 PlAV GR m 10 AUX OD6eratlOn 5 nci Lect pina cm Maie nns e sg peti cuna Scroll CaptionAdJustment LER uds 16 Alternate Audio video Source ssssssssss
16. IO sound track by using the cursor buttons 3 SUBTITLE LANGUAGE SETUP Select the preferred SUBTITLE language by using the cursor buttons ex EA Preference Page TV Type Subtitle French Disc Menu Spanish Parental German Password Italian Default Portuguese Preferred Menu Language 4 DISC MENU LANGUAGE SETUP Select the preferred DISC MENU language by using the cursor buttons SETUP 5 PARENTAL Select suitable parental guidance by the cursor buttons and conformed by pressing ENTER button lt LA Preference Page TV Type Audio Subtitle Disc Menu Parental Password CHANGE Default Change Password 6 PASSWORD Select the change and press ENTER button Type the old password The initial factory code is 1379 and key in 4 characters password now you want to use and retype again to confirm key in correctly 25 la amp as CM Preference Page Preference Page TV Type 1KID SAF TV Type Audio 2G Audio Subtitle 3PG Subtitle Disc Menu 4PG13 Disc Menu Parental spes Parental 6R Password Password
17. No television video image appears The unit is not connected to the parking brake detection switch Make proper connection according to wire connection The parking brake is not engaged For safety reasons no television video images are displayed while the vehicle is moving Engaging the parking brake will cause images to be displayed No color in picture The disc format is not accordingto the TV set used PAL NTSC Please the television mode of the choice accommodation JPEG disc can not be played No JPEG files are recorded on the disc Change the disc back in a compliant formant JPEG files are not recorded Change the disc Record JPEG files using a compliant application The operation keys do not work The built in microcomputer is not operating properly due to noise Press the RESET button Front panel is not properly fixed into its place The radio does not work The antenna cable is not connected Insert the antenna cable firmly The signals are too weak Select a station manually 27 888 J4301 03S
18. T button is placed on the housing and must be activated with either a ballpoint pen or thin metal object The RESET button is to be activated for the following reasons A Initial installation of the unit when all wiring is completed B All the function buttons do not operate C Error symbol on the display 13 BASIC OPERATION 15 IR infrared Sensor for the remote control 16 AUX IN SOCKET The operation of the AUX please see page 16 17 USB CONNECT LINE SOCKET The operation of the USB please see page 19 18 TFT Display liquid crystal display The operation of the TFT please see page 18 19 MIC Microphone Position TOP RPT INT RDM FUNCTION Only for the RC A To memorize the current frequency press any one of the six preset buttons 1 6 on the remote controller hold for more than 2 seconds B To recall the preset memory press one of the preset buttons 1 6 C Press 1 TOP button to select the first track chapter to play a In the state of VCD CD MP3 disc playing press the button to select the first track chapter to play depend on the disc used for VCD b In the state of DVD disc playing the 1TOP button is not available D Press 2 RPT button briefly to select repeat mode as follow DVD VCD CD MP3 CHAPTER REPEAT ON TITLE REPEAT ON REP ONE REP ALL gt 4 L 4 REPEAT ALL lt Continuously repeat at the current chapter track when selected REP ONE mode
19. TION EXPOSURE IF DIRECTED BE SURE TO OPERATE THE DVD PLAYER CORRECTLY AS INSTRUCTED USE OF CONTROLS ORADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE DO NOT OPEN COVERS AND DO REPAIR YOURSELF REFER SERVICING TO QUALIFIED PERSONNEL WARNING TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK DO NOT EXPOSE THIS EQUIPMENT TO RAIN OR MOISTURE TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK AND ANNOYING INTERFERENCE USE ONLY THE RECOMMENDED ACCESSORIES THIS DEVICE IS INTENDED FOR CONTINUOUS OPERATION This product incorporates copyright protection technology that is protected by method claims of certain U S Patents and other intellectual property rights owned by Macrovision Corporation and other rights owners Use of this copyright protection technology must be authorized by Macro vision Corporation and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision Corporation Reverse engineering or disassembly is prohibited REGION MANAGEMENT INFORMATION This DVD Player is designed and manufactured to respond to the Region Management Information that is recorded on a DVD disc If the Region number described on the DVD disc does not correspond to the Region number of this DVD Player this DVD Player cannot play this disc DISC NOTES Disc formats supported by this player Audio and Video DVD DVD E47 Disc size 12
20. age General setup page TV Display LB Angle Mark ON OSD Lang ENG Spdif Output SPDIF RAW Captions ON Screen Saver ON Last Memory ON TV Display Normal PS Angle Mark Normal LB OSD Lang Wide Spdif Output Captions Screen Saver Last Memory Go To General Setup Page Set TV Display Mode 1 Press SETUP button on the remote control 2 The SETUP menuis displayed 3 Select the preferred item by using the 4 YV buttons 4 Press ENTER button a GENERAL SETUP This setup page includes the item of TV display amp audio output feature The detail please refer to GENERAL SETUP MENU b SPEAKER SETUP This is to activate the audio output from DOLBY AC3 5 1 DOWNMIX to 2 channel mode Please refer to SPEAKER SETUP MENU c DOLBY DIGITAL SETUP Please refer to DOLBY DIGITAL SETUP d PREFERENCE SETUP This setup page includes all the configuration of support feature The detail please refer to PREFERENCES SETUP MENU TV Screen Video Material Wide 16 9 Normal Pan Scan Letter box LO ERO EC sed 1 TV DISPLAY SETUP This is to select the appropriate TV aspect 4 3 or 16 9 according to the connected TV set Normal PS For 4 3 TV Played back in the PAN amp SCAN style If connected to wide screen TV the left and right edges are
21. b Select REP ALL mode to continuously repeat all chapter track on the current disc c REPEAT feature does not support VCD2 0 with PBC ON E Long Press 3 INT button to scan disc a In the state of CD disc playing press the 3 INT button to play the previous 6 seconds partof each track chapter on disc b In the state of Mp3 disc playing the 3 INT button is not available c In the state of VCD disc playing long press the 3 INT button the screen will display as follow long press it again will release this mode SELECT DIGEST TYPE TRACK DIGEST DISC INTERVAL TRACK INTERVAL 1 you can use theA V gt 4 buttons on the remote control to select the item and then press the ENTER button to confirm 2 In Track Digest OR Disc Track Interval MODE You use the A w p gt lt buttons to select the items and then press the ENTER to confirm You can also select the items using the corresponding number buttons and then press the ENTER to confirm 14 BASIC OPERATION d In the state of DVD disc playing long press the 3 INT button the screen will display as follow long press it again will release this mode SELECT DIGEST TYPE TITLE DIGEST CHAPTER DIGEST TITLE INTERVAL CHAPTER INTERVAL 1 you can use the A w p lt buttons on the remote control to select the item and then press the ENTER button to confirm 2 In Title Chapter Digest OR Title Chapter Interval MODE You can use the A V 9 4 buttons
22. cm COMPACT H 1 VCD Audio and Video Disc size 12 cm CES Audio DIGITAL AUDIO Disc size 12 cm CD Audio MES eM gt Disc size 12 cm Discs which cannot be played with this player e DVD ROM e DVD R DVD RAM e CDV e CD G Handling and Cleaning e Dirt dust scratches and warping disc will cause misoperation e Do not place stickers or make scratches on discs Do not warp discs Adisc should always be kept in its case when not in use to prevent from damaging e Do not place discs in the following places 1 Direct sunlight 2 Dirty dusty and damp areas 3 Near car heaters 4 On the seats or dashboard Disc Cleaning Use a dry soft cloth to wipe the surface If the disc is quite dirty use a soft cloth slightly moistured with isopropyl rubbing alcohol Never use solvents such as benzine thinner or conventional record cleaners as they may mar the surface of the disc Note A disc may become somewhat scratched although not enough to make it unusable depending on your handle it and conditions in the usage environment Note these scratches are not an indication of any problem with the player Label side up Do nottouch gt the underside of the disc 8 SN 2 X e Do not 1 bend Wipe the disc from center toward the outside edge Preparing New Discs with Rough Spots
23. e tooth C If you want not to use the function of the Blue tooth about the unit you can select the Bluetooth OFF The method to see the page 11 Video Quality Adjustment Press SEL button briefly to across the sound picture mode selection menu by repeatedly pressing the SEL button you can select the individual menu items such as volume bass treble balance fader color bright contrast tint BG color and Bluetooth Then rotate the VOL to adjust the selected mode The corresponding value will show on the display gt Volume gt Bass Treble Balance gt Fader Bluetooth 4 Tint Contrast lt Bright lt Color lt BG Color Adjustable Items COLOR 0 to 32 Adjust the color fo the picture lighter or darker BRIGHT 0 to 32 Adjust if the picture is too bright or too dark CONTRAST 0 to 32 Adjust the contrast of the bright ans dark portion TINT 0 to 32 Adjust the tint if the human skin color is unnatural Adjustable when NTSC is selected for NTSC PAL The function of the VOLUME BASS TREBLE BALANCE and FADER Please see page 11 Rear View Camera When connecting the rear view camera the mirror image of the rear view through the rear view camera is automatically displayed on the monitor when you change the gear to the back position The monitor on the unit only NOTE For The Brake Function if the parking brake is not engaged parking brake flashes on the monitor and n
24. ect to dust dirt or excessive vibration DIN FRONT REAR MOUNT This unit can be properly installed either from Front conventional DIN Front mount or Rear DIN Rear mount installation utilizing threaded screw holes at the sides of the unit chassis For details refer to the following illustrated installation methods INSTALLATION DASH BOARD HEX NUT d METAL MOUNTING lt gt STRAP SPRING WASHER CONSOLE PLAIN WASHER 9 o TAPPING sScREW E E SLIDE BRACKET HOUSING 6 KEY PLATE KEY PLATE PLASTIC COVER If you want to take CHASSIS out of the SLIDE BRACKET HOUSING first remove the PLASTIC COVER of the both sides away then insert the two KEY PLATE into left and right side of chassis as above illustration INSTALLATION How To Remove And Install The Front Panel When detaching or attaching the control panel be careful not to damage the connectors on the back of the control panel and on the panel holder Detaching The Front Panel Before detaching the control panel be sure to turn off the power 1 Press the release button and the left hand side of the front panel will release FIG 1 2 Pull off the front panel FIG 2 and keep the front panel into the case FIG 3 Attaching The Front Panel 1 First insert the right hand side of the front panel into the hollow of the unit 2 Gen
25. el and keep more than 2 seconds or short press 4 0on the remote control to rapid forward reverse 15 BASIC OPERATION MPEG4 Disc Play MPEG4 disc is playing as the format of FILE For example DS ORD e In stop mode useA V onthe 001 001 Repeat one remote control to select the item then press ENTER button to confirm Pressing REPEAT button repeatedly can Je MEY AUG select three kinds of repeat play mode 7 C14 Long fright REP ONE Play the same song over and over again REPEATALL Play all songs in the current directory in sequence over and over again DISC REPEAT Play all songs in the discover and over again In the playback use ppl or keg to skip an item ahead or back In the playback swing the SEL knob in the direction of A V button on front panel and keep more than 2 seconds or short press pp lt qon the remote control to rapid forward reverse AUX Operation To connect analogue replay devices Use this jack to replay sound of other replay equipment such as DVD players computers etc Via the loudspeakers 1 Please connect the external device with stereo jack plug the AUX IN socket 2 Press the MOD button to select the AUX IN connection 3 Rotate the VOL to adjust the volume level Scroll Caption Adjustment In Radio mode You can adjust your desired scroll caption the method of the operation as follow a Press and hold the SETUP button for about 2 seconds on the re
26. gle Function for DVD Only Press ANGLE during playback Each time the button is pressed number of the angle changes in sequential order Notes The angle number is different according to the disc The function only work for disc having scenes recorded at different angles When no different angle are recorded W will be displayed at screen left top corner TV Operation Switching to TV mode 1 Connect the TV antenna to the TV IN from Ant jack on the back of the unit 2 Press the mode button on the remote control to select the TV mode Auto searching TV channels Press the SEARCH button on the remote controller to star search channel automatically Selecting channel Press the A w button to choose the channel upward and downward The numeric button 0 9 allow you to select the corresponding channel directly Note In TV mode the 10 button is not available Fine TV channel You can press gt 4 button on the remote controller to fine TV channel It can be improve the picture quality Channel ADD DEL In TV mode after search channel automatically when you want delete the no sign channel press the SKIP button the screen display SKIP the channel will be deleted Also you can press numeric button to select channel then press SKIP to add channel the screen display SAVE SETUP GENERAL SETUP GENERAL PAGE V 8g sn BA WB General setup p
27. it Following your phone s instruction guide for details active your mobile handset s Bluetooth function the handset will search for accessible Bluetooth devices 4 Your phone will find this Car Kit Select this Car Kit from the list 5 Enter passkey 8888 then press OK to pair the Car Kit and the handset the word PAIR OK PLEASE CONNECT will display in the 6 Select the CONNECT from the list on the phone if you connect successfully the 3 ICON remains solid the screen then you can operate the function of blue tooth about the unite Important a If the pairing can not be completed within approximately 2 minutes whiles the pairing mode is actived and you will need to reattempt pairing See steps 2 5 above b After pairing is completed ifthe ICON is stilling flash on the please follow the steps to to reattempt pairing through your handset until the ICON remains solid on the screen 2 Using The Bluetooth Car Kit Once connecting is complete you may access the following function Some ofthe below mentioned functions only accessible for handset supported with hands free profile Answer a call After you hear the ring tone the incoming telephone number will display on the TFT LCD press the button briefly on the front panel to listen During talking if you want to use your phone to listen please press it button Make a call Press and hold the button on the
28. mote control the adjustment scroll bar will display on the screen b Use the VOL to select among of the A B C X Y Z and blank and use the A V button on the front panel to ahead back add cancel and then press the SETUP button briefly to confirm Press the SETUP button longer again to renew Alternate Audio video Source To connect analogue replay devices Use this jack to replay sound of other replay equipment such as DVD players computers etc Via the loudspeakers See fig 1 1 Please connect the external device with stereo jack plug the AUX IN socket 2 Press the MOD button to select the AUX IN connection 3 Use the buttons on the external device to operate the item of the playing Headphones port connect cable 16 BASIC OPERATION BLUETOOTH CAR KIT USER MANUAL 1 Pair To Your Bluetooth Phone Prior to using the Car Kit for the fist time you must pair it with a Bluetooth enabled mobile handset The following steps describes pairing the instruction for a typical Bluetooth enabled mobile handset 1 Place the Car Kit and mobile handset no more than 1 meter apart 2 Put the Car Kit in pairing mode Press the POWER button to turn ON the ICON will flash on the Press and hold the PAIR button until the word PAIRING NOW display it s now ready for pairing If you want not to pair please press it longer again 3 Set your bluetooth phone to discover the Car K
29. o playback picture will be shown Only the audio will be heard This warning appears only when the parking brake wire is connected to the parking brake system built in the car See page 8 18 BASIC OPERATION USB Operation Following the diagram below connect your USB device to the front panel USB port If itis properly connected the device will be mounted and start playing automatically USB port USB connect line In USB Playback mode Use the UP DOWN RIGHT or LEFT buttons to navigate to and select files to play and press ENTER to begin playback or viewing in the case of JPEG files To skip to the next or last track press the PP or I buttons Press the pp or 4 buttons for Fast Forward or Fast Reverse playback REPEAT play modes are also available by repeatedly pushing REPEAT until the desired mode is found Changing From USB to DISC Playback Modes If you are in USB Playback mode and wish to begin playback of a disc already in the player press the STOP button once Then press the GOTO button and the player will switch to DVD VCD CD MP3 Playback mode Changing From DISC to USB Playback Modes If the disc present in the player is an MP3 disc press the STOP button once and press the GOTO button to USB playback If the disc present in the player is an DVD or VCD or CD disc press the STOP button twice and press the GOTO button to USB playback Important Note TO PREVENT DAMAGE TO THE USB DEVICE
30. ss itto changing of the AUDIO soundtrack on multiaudio soundtrack dvd disc Changing of the sound mode ofthe VCD CD disc Changing ofthe SUBTITLE language on multi subtitle language DVD disc In radio mode Press this button for distance reception when you are located at weak signal location depress it for stronger signal Press this button to use the Bluetooth function refer to the page 17 Press this button to begin playback ata momentin the program you designate Use the number buttons to enter the data that is needed In Bluetooth menu it serves as the X button on your mobile handset Press pp to skip to the next track amp press Ke to skip back one track Note In DVD mode press continually the K twice to skip back one track Press this button repeatedly to cycle through the various audio and video adjustments you can make Volume Bass Treble Balance Fader Color BG Color Brightness Contrast Tint and Bluetooth Press itto adjust volume level Use these buttons to navigate the various menus present in the product In TV mode press gt 4 to fine tune Press the A V to select channel upward and downward Press itto display the root menu of the DVD disc Press itlonger to switch the Subwoofer ON and OFF In Radio mode press this button repeatedly to switch between the five radio bands In Disc Playback modes Press this button to see information aboutthe disc currently in play Press this button to turn the unit ON press
31. ssssssssses e eene menn nne 16 Blue tooth Operation rsen iniisa axe 17 Video Quality Adjustment _ 18 Rear View Camera eere Paride 18 WSB Operation Re tecto borea dent Lex rdg 19 On Screen Display Function sroine enen e a nE EEn OE 19 Multi Audio Language eee 20 Multi Subtitle Language Function 02 cc cece cece cece eee e eee 20 Multi Angl FUNCUON die Dear pre pie hia E ADR 20 Tite Menu Function scene ere etre euch oido 20 LUXOR 20 Kl tee a a a a 21 General Setup heii e lads 21 Speaker Setup T 23 Dolby Digital Setup iiie teritur tret ged rem ede sige eed dde ined 23 Pr ferences Setup 2 ecd ue eer HERE ad RE ones 24 Defaults Table oe obe mb emori 25 Specifications CUR VERE cR RU c Edda 26 Tro ble SHOOTING oeste e Rie a E Ke pa a MES MERDA EU UAE 27 SAFETY INFORMATION CAUTION THIS DVD PLAYER ISACLASS I LASER PRODUCT HOWEVER THIS DVD PLAYER USES VISIBLE INVISIBLE LASER BEAM WHICH COULD CAUSE HAZARDOUS RADIA
32. th Then rotate the VOL to adjust the selected mode The corresponding value will show on the display When mode has not been adjusted for several seconds display returns to normal radio or CD display gt Volume gt Bass Treble Balance gt Fader Bluetooth 4 Tint Contrast lt Bright lt Color lt BG Color 4 A Volume Adjust volume level by using VOL button Note The unitis initially set to volume mode B Bass Press SEL button one time Adjust bass level by using VOL button C Treble Press SEL button two times Adjust treble level by using VOL button D Balance Press SEL button three times Adjust sound balance between left and right speakers by using VOL VOL button E Fader Press SEL button four times Adjust sound balance between front and rear speakers by using VOL VOL button NOTE the function of the Color Bright Contrast and Tint Please see page 17 11 BASIC OPERATION 5 BAND BUTTON In RADIO mode press the BAND button on the front panel or on the remote controller to select your desired radio band and word which band is selected will be displayed in the TFT Press it to change the bands as below gt FM MW gt LW gt FM gt MW gt FM gt For 3 Bands Europe For 2 Bands Europe For 2 Bands USA In Bluetooth menu you can press this button to use the Bluetooth funtion please refer to see page 17 EQ BUTTON Swing
33. the SEL knob briefly in the EQ direction to turn to equalization function and to select desired audio mode There are five kinds of mode as below JAZZ gt CLAS gt POP gt ROCK gt FLAT APS DISP BUTTON Automatic Memory Function In Radio mode swing the SEL knob in the direction of APS DISP for about 2 seconds to active automatic station storage the radio searches within the current frequency band e g FM1 forthe strongest station are then allocated to the corresponding storage locations Then the station of the first storage location is set If you would like to search for more stations in the FM band press the BND button 5 in order to change to the FM2 or FM3 band Swing the SEL button 4 again in the APS DISP direction for about 2 seconds to continue search Program Scan Function In Radio mode swing the SEL knob in the direction of APS DISP to scan and play all the preset sations in order and it will hold at each band for about 5 seconds If you like one of them press the PLAY PAUSE button to stop the scanning Display ON OFF Function In Disc mode swing the SEL knob briefly in the direction of APS DISP to turn off the display image the monitor on the unit only the sound will stay on Swing it again to resume the playback picture mode In Radio mode You can press SEL knob briefly to select the BG COLOR by repeatedly pressing the SEL knob then rotate the VOL to select the background color among of the AUTO
34. tly push the left hand side of the front panel until you feela Click and then press the PWR button 2 briefly to switch the device ON FRONT PANEL FRONT PANEL RELEASE BUTTON FIG 1 FIG 2 PROTECTIVE CASE Attaching The Front Panel FRONT PANEL FIG 3 PANEL ANGLE ADJUSTMENT CHANGING THE CONTROL PANEL ANGLE When you wantto change the viewing angle of the operating unit to play you press the angle button repeatedly to select the desired angle as follows Angle 1 Angle 2 Angle 4 Caution Do not insert your finger behind the control panel ELECTRIC CONNECTION WIRING CONNECTION O MAIN UNIT WHITE B 12V REAR CAMERA SWITCH GREEN 5 PARKING BRAKE TVANT IN YELLOW REAR CAMERA INPUT AUX optional VIDEO IN YELLOW MIL Mii ANTENNA CONNECTOR SSS RCH IN RED LCH IN WHITE RCA CABLE GREY SUBWOOFER AANA am IGNITION RED f emp EK OUT2YELLOW SWITCH B REAR RCAOUTPUT COAXIAL OUT BROWN CABLE optional RCH RED MEMORY YELLOW BACK UP B FRONT RCAGUTRUT LCH WHITE CABLE FRONTRCARED R GROUND B BEACK S VIDEO OUT 1 YELLOW FRONTRCA WHITE L FOR RCALINE OUT VERSION ONLY xum FUSE ANTENNA BLET LD WHITE GREY FRONT FRONT Lch SPK WHITE BLACK
35. y in advance the chosen number is shown on display 11 V A BUTTONS TUNE SEEK TRACK SKIP UP DOWN a In DISC USB mode if you wish to jump forwards or backwards press the SEL button 4 briefly in the A or y direction Note during the DVD playback press the SEL button continually twice in y direction to skip back one track during playback To wind through the tracks keep the SEL button pressed in the A or V direction for about 2 seconds FF X2 appears in the display Operating the SEL button again the speed of rapid forward reverse changes according to the disc as follow DVD VCD CD MP3 r Normal Playback 2x 4x gt 8x gt 16x Note For some VCD 2 0 dics PBC playback control A and V buttons may be unavailable b In Radio Mode Move the SEL button in the direction of V or A in order to seta radio station manually Keep the SEL taste pressed down in the y or A direction in order to start the search for a radio station automatically 12 PAIR c BUTTON In Bluetooth menu press this button to use the Bluetooth function how to use it please refer to see page 17 13 A EJECT BUTTON Press this button to insert and eject the Disc The operating unit swings down wards Insert the Disc with the labelled side facing upwards gently into the CD slot until the device draws in the CD DVD automatically The operating unit will automatically swings back to the normal position 14 RESET BUTTON RESE
Download Pdf Manuals
Related Search