DAP-1150 - D-Link
Contents
1. D Link Quick Installation Guide DAP 1150 DAP 1150 Wireless Access Point Supporting Router Mode DAP 1150 Quick Installation Guide BEFORE YOU BEGIN Delivery Package e Access point DAP 1150 e Power adapter DC 5V 1 2A e Straight through Ethernet cable CAT 5E e CD ROM with User Manual and Quick Installation Guide e Quick Installation Guide brochure If any of the items are missing please contact your reseller Using a power supply with a different voltage rating than the one included will cause damage and void the warranty for this product Default Settings IP address of access point 192 168 0 50 Username login admin Password admin Name of wireless network SSID DAP 1150 System Requirements and Equipment e Acomputer with any operating system that supports a web browser e A web browser to access the web based interface of the access point Windows Internet Explorer Mozilla Firefox or Opera e ANIC Ethernet or Wi Fi adapter to connect to the access point e An 802 11b g or n Wi Fi adapter to create a wireless network DAP 1150 Quick Installation Guide CONNECTING TO PC PC with Ethernet Adapter 1 Make sure that your PC is powered off 2 Connect an Ethernet cable between the LAN port located on the back panel of the access point and the Ethernet port of your PC 3 Connect the power cord to the power connector port on the back panel of the access point then2. Configuring Wi Fi Adapter in OS Windows 7 la yA Click the Start button and proceed to the Control Panel window Select the Network and Sharing Center section If the Control Panel has the category view the Category value is selected from the View by drop down list in the top right corner of the window choose the View network status and tasks line under the Network and Internet section In the menu located on the left part of the window select the Change adapter settings line In the opened window select the icon of the wireless network connection and make sure that your Wi Fi adapter is on To open the list of available wireless networks select the icon of the wireless network connection and click the Connect To button or left click the network icon in the notification area located on the right side of the taskbar 16 14 t 13 10 2011 DAP 1150 Quick Installation Guide 6 Inthe opened window in the list of available wireless networks select the wireless network DAP 1150 and click the Connect button Not connected 4 ail Connections are available Wi Fi A wireless router wall Open Network and Sharing Center 7 Wait for about 20 30 seconds After the connection is established the network icon will be displayed as the signal level scale If you perform initial configuration of the access point via Wi Fi connection note that immediately after changing the wireless default settings of the access point
3. After selecting the language the notification on unsaved changes will be displayed Click the Save button to save the current language of the web based interface as the default language DAP 1150 Quick Installation Guide Selecting Operating Mode By default the access point mode 1s specified for the device If you need to use the device as a router proceed to the Advanced Device mode page select the Router value from the Work mode list and click the Change button Device work mode settings Work mode Access point Router Then select the Save amp Reboot value from the top page menu displayed when the mouse pointer is over the System caption and wait until the device is rebooted When the device is switched to the router mode you cannot connect to it via a wired connection After the device has rebooted the quick settings page in the router mode opens You have connected to the web based interface of the DAP 1150 device now you can do the following O Q K Connect to internet Host site Configure Wi Fi Configure manually Logout On the opened page you can proceed to the Wizards use the Connect to internet Host site and Configure Wi Fi buttons or switch to the standard web based interface of the access point by clicking the Configure manually button DAP 1150 Quick Installation Guide Configuring Wireless Network By default the wireless network of the access point is open
4. it requires no password to access it To avoid unauthorized access to your wireless local area network change the default settings of the access point Example of Wireless Settings 1 Go to the Wi Fi Security settings page 2 Select the WPA2 PSK value from the Network Authentication drop down list Network Authentication WPA2 PSK Encryption Key PSK WPA2 Pre authentication E WPA Encryption settings WPA Encryption AES WPA reneval 3600 3 Enter a key a password that will be used to access your wireless network in the Encryption Key PSK field Use digits and Latin characters 4 Select the AES value from the WPA Encryption drop down list Click the Change button If you perform initial configuration of the access point via Wi Fi connection note that immediately after changing the wireless default settings you will need to reconfigure the wireless connection using the newly specified settings DAP 1150 Quick Installation Guide Configuring Local Area Network 1 Go to the Net LAN page If needed change the IP address of the access point s LAN interface and the mask of the local subnet in the IP Address and Netmask fields Then click the Save button IP Address Netmask 192 1568 0 50 2539 259 255 0 2 By default the DHCP server of the device is enabled In the DHCP server section you can change the parameters of the DHCP server As a rule the DHCP server should be disabled when the device i
5. plug the power adapter into an electrical outlet or power strip 4 Turn on your PC and wait until your operating system is completely loaded Now you should configure your PC to obtain an IP address automatically as DHCP client DAP 1150 Quick Installation Guide Obtaining IP Address Automatically in OS Windows XP l Click the Start button and proceed to the Control Panel gt Network and Internet Connections gt Network Connections window 2 In the Network Connections window right click the relevant Local Area Connection icon and select the Properties line in the menu displayed Network Connections Fie Edit View Favorites Tools Advanced Help sack wa ja Search gt Folders HAR Address Network Connections Name Type Status Network Tasks LAN or High Speed Internet SL ocal Area Connection i n or High Speed Inter Enabled l Disable Status Repair Other Places Ea Control Panel a My Network Places G My Documents Bridge Connections Create Shortcut Delete Rename Details Properties 3 In the Local Area Connection Properties window on the General tab select the Internet Protocol TCP IP line Click the Properties button DAP 1150 Quick Installation Guide 4 Select the Obtain an IP address automatically and Obtain DNS server address automatically radio buttons Click the OK button Internet Pr
6. you will need to reconfigure the wireless connection using the newly specified settings DAP 1150 Quick Installation Guide CONFIGURING ACCESS POINT Connecting to Web based Interface I 2 Start a web browser In the address bar of the web browser enter the IP address of the access point by default the following IP address is specified 192 168 0 50 Press the Enter key File Edit wiew Bookmarks Widgets Tools Help Q JA htto 192 168 050 On the opened page enter the username login and password for the administrator account by default the following username and password are specified admin admin Then click the Enter link D Link DAP 1150 Login admin Password Enter Clear If the error The page cannot be displayed or Unable to display the page Could not connect to remote server occurs upon connecting to the web based interface of the access point make sure that you have properly connected the device to your computer DAP 1150 Quick Installation Guide Right after the first access to the web based interface you are forwarded to the page for changing the administrator password specified by default System password setting up The system password and the password for the web based interface will be changed atthe same Ume Login admin T Password Confirmation Save Enter the new password in the Password and Confirmation fields Then click the Save b
7. corporate worldwideoffices
8. he access point s LAN at the moment select the relevant value from the drop down list located to the right of the field Ethernet 00 90 40 08 00 00 lt Selectaddress gt YA Clone MAC 6 For connection of PPPoE type in the PPP section enter authorization data provided by your ISP the username login in the USername field and the password in the Password and Password confirmation fields or select the Without authorization checkbox if authorization is not required Username Without authorization E Password Password confirmation DAP 1150 Quick Installation Guide 7 For connection of Static IP type in the IP section fill in the IP Address Netmask Gateway IP Address and Primary DNS server fields IP Address Netmask Gateway IP address Primary DAS server Secondary DMS server 8 For connection of Dynamic IP type if your ISP has provided the address of the DNS server in the IP section deselect the Obtain DNS server addresses automatically checkbox and fill in the Primary DNS server field Obtain DNS server addresses m automatically Primary DNS server Secondary DNS server Vendor ID DAP 1150 Quick Installation Guide 9 For connection of PPTP Static IP or L2TP Static IP type in the IP section fill in the IP Address Netmask Gateway IP Address and Primary DNS server fields Then in the VPN section enter authorization data provided by your ISP the username login in the Use
9. idge Connections Create Shortcut Delete E Rename Properties 5 In the Local Area Connection Properties window on the Networking tab select the Internet Protocol Version 4 TCP IPv4 line Click the Properties button DAP 1150 Quick Installation Guide 6 Select the Obtain an IP address automatically and Obtain DNS server address automatically radio buttons Click the OK button Internet Protocol Version 4 TCP 1Pv4 Properties General Alternate Configuration You can get IP settings assigned automatically iF your network supports this capability Otherwise you need to ask your network administrator For the appropriate IP settings 6 Use the Following IP address Obtain DNS server address automatically 6 Use the Following DNS server addresses Validate settings upon exit 7 Click the OK button in the connection properties window Now your computer is configured to obtain an IP address automatically DAP 1150 Quick Installation Guide PC with Wi Fi Adapter 1 Connect the power cord to the power connector port on the back panel of the access point then plug the power adapter into an electrical outlet or power strip 2 Turn on your PC and wait until your operating system is completely loaded 3 Turn on your Wi Fi adapter As a rule modern notebooks with built in wireless NICs are equipped with a button or switch that turns on off the wireless adapter refer to your PC documents If your PC i
10. otocol TCP IP Properties General Alternate Configuration You can get F settings assigned automatically if your network supports this capability Othenvise you need to ask your network administrator for the appropriate IP settings Obtain an IF address automatically O Use the following IP address O Use the following DNS server addresses SS es Cavers 5 Click the OK button in the connection properties window Now your computer is configured to obtain an IP address automatically DAP 1150 Quick Installation Guide Obtaining IP Address Automatically in OS Windows 7 1 Click the Start button and proceed to the Control Panel window 2 Select the Network and Sharing Center section If the Control Panel has the category view the Category value is selected from the View by drop down list in the top right corner of the window choose the View network status and tasks line under the Network and Internet section 3 In the menu located on the left part of the window select the Change adapter settings line 4 Inthe opened window right click the relevant Local Area Connection icon and select the Properties line in the menu displayed G gt F iz gt Control Panel Network and Internet Network Connections Organize Disable this network device Diagnose this connection Rename this connection gt _ LAN A Ge Disable ae 9 Status Diagnose Fpl Br
11. rname field and the password in the Password and Password confirmation fields or select the Without authorization checkbox if authorization is not required In the VPN server address field enter the IP or URL address of the PPTP or L2TP authentication server If your ISP applies encryption select a needed value from the Encryption drop down list IP Address Metmask Gateway IP address Primary DNS server Secondary DMS server Connect automatically F Username Without authorization Password Password confirmation VPN server address Encryption No encrypt bal DAP 1150 Quick Installation Guide 10 For connection of PPTP Dynamic IP or L2TP Dynamic IP type if your ISP has provided the address of the DNS server in the IP section deselect the Obtain DNS server addresses automatically checkbox and fill in the Primary DNS server field Then in the VPN section enter authorization data provided by your ISP the username login in the USername field and the password in the Password and Password confirmation fields or select the Without authorization checkbox if authorization is not required In the VPN server address field enter the IP or URL address of the PPTP or L2TP authentication server If your ISP applies encryption select a needed value from the Encryption drop down list Obtain DNS server addresses E automatically Primary DNS server Secondary DNS server Vendor ID Connect automaticall
12. s equipped with a pluggable wireless NIC install the software provided with your Wi Fi adapter Now you should configure your Wi Fi adapter DAP 1150 Quick Installation Guide Configuring Wi Fi Adapter in OS Windows XP l Click the Start button and proceed to the Control Panel gt Network and Internet Connections gt Network Connections window 2 Select the icon of the wireless network connection and make sure that your Wi Fi adapter is on a Network Connections File Edit View Favorites Tools Advanced Heip O O BP seach E Foes Ei Name LAN or High Speed Internet SI Create a new connection Wireless Network Connection Setup a home or small 1394 Connec office network lt b 139 Change Windows Firewall lt t Local Area Connection ET Gi i a Repair this connection Rename this connection la Change settings of this connection 3 Search for available wireless networks 4 In the opened Wireless Network Connection window select the wireless network DAP 1150 and click the Connect button After that the Wireless Network Connection Status window appears If you perform initial configuration of the access point via Wi Fi connection note that immediately after changing the wireless default settings of the access point you will need to reconfigure the wireless connection using the newly specified settings DAP 1150 Quick Installation Guide
13. s used in the access point mode select the Disable value from the Mode drop down list DHCP server Mode Enable Start IP 192 168 0 51 End IF 192 168 0 100 Lease time min 35400 3 After specifying the DHCP server settings click the Save button DAP 1150 Quick Installation Guide Configuring Connection to the Internet Router Mode Only You should configure your WAN connection in accordance with data provided by your Internet service provider ISP Make sure that you have obtained all necessary information prior to configuring your connection Otherwise contact your ISP 1 Go to the Net WAN page and click the Add button 2 In the General settings section select a needed value from the Connection Type drop down list From the Port drop down list select the WAN value 4 Specify a name for your connection any name for easier identification in the Name field General settings Connection Type PPPoE Port WAN Name pppoe WAN 1 Enable Direction FFAN DAP 1150 Quick Installation Guide 5 If your ISP uses MAC address binding in the Ethernet section in the MAC field enter the MAC address registered by your ISP upon concluding the agreement To set the MAC address of the network interface card of the computer that is being used to configure the access point at the moment as the MAC address of the WAN interface click the Clone MAC button To set the address of a device connected to t
14. utton Remember or write down the new password for the administrator account In case of losing the new password you can access the settings of the access point only after restoring the factory default settings via the hardware RESET button This procedure wipes out all settings that you have configured for your device DAP 1150 Quick Installation Guide After successful registration the access point s quick settings page opens You have connected to the web based interface of the DAP 1150 device now you can do the following Ww X Configure Wi Fi Configure manually Logout On the page you can proceed to the Wi Fi Setup Wizard use the Configure Wi Fi button or switch to the standard web based interface of the access point by clicking the Configure manually button After clicking the button the system statistics page opens The page displays general information on the access point and its software To get back to the quick settings page from the Wi Fi Setup Wizard or any web based interface menu section left click the D Link logo in the top left corner of the page The web based interface of the access point is multilingual Select a needed language from the menu displayed when the mouse pointer is over the Language caption You can change the language of the web based interface in any menu item DA ink System v Language v English DAP 1150 Pycckit Start Status Net Wi Fi Advanced Firewall System Francais
15. y Username Without authorization a Password Password confirmation VPN server address Encryption No encrypt 11 If needed fill in other fields on the page in accordance with data provided by the ISP 12 Click the Save button DAP 1150 Quick Installation Guide Saving Settings to Non volatile Memory In order to avoid losing the new settings upon hardware reboot accidental or intentional power off of the device it is recommended to save the settings to the non volatile memory of the access point Click the Save amp Reboot line in the top page menu displayed when the mouse pointer is over the System caption D Link DAP 1150 Reboot Save amp Reboot Save Backup Factory Logout Start Status Net Wi Fi vance d Firewall System Wait until the access point is rebooted Now you can use it to access the Internet or access the web based interface of the access point to configure additional parameters for detailed description of every page of the web based interface see the User Manual document DAP 1150 Quick Installation Guide TECHNICAL SUPPORT You can find software updates and user documentation on our website D Link provides its customers with free support within the product s watranty period Customers can contact the technical support group by phone or by e mail Internet FOR TELEPHONE NUMBERS AND ADDRESSES OF D LINK OFFICES WORLDWIDE VISIT http www dlink com
Download Pdf Manuals
Related Search