TECHNICAL SPECIFICATIONS AND USER GUIDE
Contents
1. CleanG owe TECHNICAL SPECIFICATIONS AND USER GUIDE FOR BROMIDE ION SELECTIVE ELECTRODE CleanGrow s bromide ion combination probe is designed for sensing bromide ions in aqueous solutions This model includes a reference electrode and an ion selective electrode for monovalent bromide ions Br and is suitable for both laboratory and field applications This guide contains information about the operation and maintenance of the probe The probe is an all solid state ion selective electrode based on carbon nanotube technology It does not contain any internal filling solution and can work in all positions and stored dry Special maintenance is not required however before use and after large storage periods it needs to be conditioned in conditioning solution TECHNICAL SPECIFICATIONS e Slope 54 5 mV decade e Concentration range 0 4 8 000 ppm 5x10 0 1 M e pH working range 1 12 e Working temperature 5 50 C e Response time lt 20s e Dimensions Standard diameter 11 mm length 120 mm e Connector type BNC with 1 m cable length MAIN INTERFERENCES The probe will not give reliable readings if more than a trace of silver Ag sulphide S7 or mercury Hg ions are present in the solution There is also high interference from cyanide CN iodide I and the bromide electrode will only give reliable results if these ions are absent or present in an insignificant concentration compared to bromide ions It also has mino2. r interference from chloride CI and hydroxyl OH ions REQUIRED SOLUTIONS e Bromide standard solution e Distilled Deionised water CleanG owe BEFORE USE Remove the protection cap from the tip of the probe Condition the probe with a bromide solution of 1000 ppm for 10 minutes MAINTENANCE AND STORAGE Store in a cool dry place Store and transport below 50 C When finished measurements put back on the protection cap of the probe Do not leave the probe uncapped for long periods of time Do not hit or scrape the tip of the probes MEASURING HINTS All samples and standards should be at the same temperature for precise measurement Calibration and measurements times must be similar Always rinse the probe with distilled water and dry between measurements Use a clean dry tissue to prevent cross contamination or shake slightly the probe to remove remaining water drops Slightly shake the probe when immersed in solution to avoid air bubbles enclosed on the tip of the probe CleanGrow Ltd Unit 4 Euro Business Park Little Island Co Cork Ireland Tel 353 21 4232000 E mail info cleangrow com
Download Pdf Manuals
Related Search