Home

English

1. SZ ae Appearance may vary m depending on country region Lumens English 7 Chapter 3 Product Overview Lens IR reception lt LED indicator 3 1 Relative position of the presenter and document Lumens English 8 Chapter 4 Start Using 1 Place an object to be displayed under the camera 2 Press POWER on the Remote Control to power on 3 Press AUTO TUNE f button on the Remote Control to optimize the image You are ready to teach present e When using the Remote Control aim at the remote sensor on the CL510 and press the power button e When the power is on the LED indicator will light red If the indicator does not light up please contact your distributor Lumens English 9 Chapter 5 Remote Control and Setting Menu 5 1 Functions of Remote Control lt Remark gt The below functions are listed alphabetically Function Descriptions Turn on and off the Document Camera Move up down left or right to select the needed function Automatically adjust the focal length of image AUTO TUNE Automatically adjust the image to have the best brightness and focusing performance BRT Manually adjust the brightness of the image CAPTURE Capture the image to the internal memory Delete the image stored in the internal memory ENTER Enter Activate functions ws Press again to defreeze MASK Enter Mask Spotlight mode AA MENU Activatetheseting menu exitthe menu PAN Enable Disabl
2. priority or internal memory in Slide mode 0 5 Sec 1 Sec Use the left and right arrow keys to 3 Sec select the delay time 5 Sec Select manual mode to switch 10 Sec images manually Manual Storage Delay Use the left and right arrow keys to select the image quality for the captured images and recorded videos Image Quality Lumens English 11 Press ENTER to immediately te ee copy the data in internal memory to the USB disk Use the left and right arrow keys to select press ENTER to confirm Delete All Yes No the deletion of all images from the USB disk priority or internal memory Use the left and right arrow keys to Yes No select and then press ENTER to format the USB disk priority or internal memory Use the left and right arrow keys to turn on off the auto erase function Auto Erase On Off When On is selected the stored images will automatically be deleted when the device is turned off l Use the left and right arrow keys to Continuous Capture select the capture mode Capture i Disable Single Continuous Disable Use the left and right arrow keys to select the capture time lt Note gt It only works when the capture mode is set to Continuous Capture Time Capture Interval Use the left and right arrow keys to select the capture interval lt Note gt It only works when the capture mode is set to Continuous 9 OD SD oc E ee ee acce Regardless of
3. 6 6 would like to enable or disable the laser mark 1 Press the LASER on the Remote Control to enable disable the laser mark 6 7 would like to freeze images 1 Press FREEZE on the Remote Control to freeze the current image on the screen 6 8 would like to capture images 6 8 1 Capturing and saving images 1 Press CAPTURE on the Remote Control to capture and save images You cannot capture images when the capture mode is set to Disable If it is set to Continuous you can capture images continuously Press CAPTURE to start capturing continuously or press CAPTURE again to exit To change the quality of captured images please refer to 6 8 2 Setting the quality of captured images To change the settings of captured images please refer to 6 8 3 Setting continuous capture 6 8 2 Setting the quality of captured images Press MENU on the Remote Control to enter the setting menu Press gt or 4 to the Storage menu Press v to find Image Quality Press gt or to select among High Normal Low Press MENU to exit QV wo qw 6 8 3 Setting continuous capture Press MENU on the Remote Control to enter the setting menu Press gt or 4 to the Setting menu Press v to find Capture Press gt or 4 to select Continuous Press w to the Capture Mode Press gt or lt to select Photo Qi XT puo I vc Lumens English 18 9 Press v to find C
4. III EK 22 6 17 would like to reduce the image noise Projector Type 22 6 18 would like to set the time for CL510 sseseeeeesssssssuss 23 6 19 would like to resume the factory default settings Factory Reset 25 6 20 Computer related fUNCtiONS wwwmmmammmamwwwwnnanamaww minane mawaa 25 6 21 would like to use the network remote control function 28 Chapter 7 DIP Switch Settings cccceeeeesecsssssseeeeeeeeeceenseeeeeeesseeeeenees 37 Chapter 8 Troubleshooting cccsscceeeescsessseeeeeeesseeeeseoesseeesseeenseeessenenseees 38 PDC TOI Ai aa 42 Lumens English 3 Copyright Information Copyrights Lumens Digital Optics Inc All rights reserved Lumens is a trademark that is currently being registered by Lumens Digital Optics Inc Copying reproducing or transmitting this file is not allowed if a license is not provided by Lumens Digital Optics Inc unless copying this file is for the purpose of backup after purchasing this product In order to keep improving the product Lumens Digital Optics Inc hereby reserves the right to make changes to product specifications without prior notice The information in this file is subject to change without prior notice To fully explain or describe how this product should be used this manual may refer to names of other products or companies nevertheless without any intention
5. to preview C Multicast lt Remark gt Please select this setting when the number of users online to watch the live image simultaneously is more than 4 Besides all users must be in the same domain 1 Log in to CL510 web control screen HD LIVE Video V Settings information User Config Network Config System Config Click Settings on the top Click Network Config Select Enable Multicast Press Confirm Oo oOo A W N Please click LIVE Video or turn on VLC Player to watch the live image lt Remark gt After the use please reset to cancel Enable Multicast Lumens English 31 6 21 2 would like to add or modify the user account Lumens HD LIVE Video 4 Settings D information LJ Network Config System Config Maintenance User Name Authority Edit Delete lt Remark gt Reference for User Permissions UserType Admin Operator Viewer Applications IE or VLC IE or VLC IE or VLC Operation of Mewimages Y Y Seins 77 File List management 6 21 2 1 would like to add the user account 1 Click Settings 2 Click User Config 3 Enter the username in the User Name 4 Enter the new password in the Password 5 Enter the password in the Confirm Password again 6 Set the permissions in the Authority 7 Click OK to conform and submit Lumens English 32 6 21 2 2 would like to delete the user account 1 Click Use
6. Clear marks of free hand drawing tool Lumens English 16 Chapter 6 Descriptions of major functions 6 1 would like to automatically adjust the image to have best brightness and focusing performance Auto Tune 1 Press Auto tune on the Remote Control to adjust automatically 6 2 would like to make text clearer and photos more colorful The default of Photo Text is Photo Photo mode and press the Photo Text button on the Remote Control to change the setting e Photo default For viewing photos or text with photos making photos more colorful e Text For viewing text files making the text clearer e Gray For viewing black amp white photos which will make the grayscale differentiation distinct 6 3 would like to zoom in out images 1 Press ZOOM on the Remote Control to zoom in images 2 Press ZOOM on the Remote Control to zoom out images 6 4 would like to adjust the focal length 6 4 1 Auto focus 1 Press AF on the Remote Control to adjust automatically 6 4 2 Manual focus Press MENU on the Remote Control to enter the setting menu Press gt or 4 to the Display menu Press v to Focus Press gt or 4 to adjust focal length Press MENU to exit 0O AOON 6 5 would like to adjust the brightness 1 Press BRT on the Remote Control to brighten the display 2 Press BRT on the Remote Control to dim the display Lumens English 17
7. gt or lt to select Yes The default value is No Press ENTER to delete the selected file Press MENU to exit S a GN Eu 6 12 would like to automatically delete the stored images whenever the device is turned off Auto Erase Press MENU on the Remote Control to enter the setting menu Press gt or 4 to the Storage menu Press 4 or v to Auto Erase Press gt or 4 to select On Press MENU to exit Remark All captured photos will be deleted automatically when the device is turned off Sr ue S9 qe c 6 13 would like to use the MASK and Spotlight function 6 13 1 would like to use the MASK or Spotlight mode Use Remote control 1 Press MASK to enter the Mask mode and press 4 w 4 or gt to move the mask position 2 Press MASK again to enter the Spotlight mode and press 4 v lt or gt to move the zone position 3 Press MASK again to exit and return to the live image screen Live image Odo Spot ghi mode EA c E A v F m JE v AC AA SAM Lumens English 20 6 13 2 would like to set the size of Mask Spotlight function In Mask Spotlight mode use the remote control 1 Press MENU to enter the image OSD menu 2 Press 4 or vw to select the item to be modified Transparency Step V oize H Size For details please refer to 5 2 Setting Menu 3 Press lt 4 or gt to perform the modification 4 Press MENU to exit the image
8. of infringement Disclaimer of warranties Lumens Digital Optics Inc is neither responsible for any possible technological editorial errors or omissions nor responsible for any incidental or related damages arising from providing this file using or operating this product Lumens English 4 Chapter 1 Safety Instructions Always follow these safety instructions when setting up and using the Ceiling Camera 1 Use attachments only as recommended 2 Use the type of power source indicated on the Ceiling Camera If you are not sure of the type of power available consult your distributor or local electricity company for advice 3 Always take the following precautions when handling the plug Failure to do so may result in sparks or fire B Ensure the plug is free of dust before inserting it into a socket B Ensure that the plug is inserted into the socket securely 4 Do not overload wall sockets extensions cords or multi way plug boards as this may cause fire or electric shock 5 Do not place the Ceiling Camera where the cord can be stepped on as this may result in fraying or damage to the cord or the plug 6 Do not block the slots and openings in the Ceiling Camera case They provide ventilation and prevent the Ceiling Camera from overheating Do not place the Ceiling Camera on the soft surface of sofas carpets or others 7 Never push any kind of objects through cabinet slots Never allow any kind of liquid to spill into the
9. wiew Image Colors Help or Mus e button to apicture sia ses chen select the picture vou want to E click Aa g it into you New Chrl h Open Chril o Save Chrl 5 Save As gu Bl a i lo es Print Preview Page Setup Print Ctrl P ETE 2 Click Get Picture to finish Please refer to the top right figure 6 20 2 would like to insert a photo in MS Word Remark Support Windows XP Operation System only 1 Click Insert Image From Scanner or Camera in MS Word Lumens English 25 B Document1 Microsoft Word die Edit view Insert Format Tools Table Window Help Break LI Fj a 100 z Page Numbers ES SOE NUN AS a Date and Time m Symbol Number Prue ig clip art Text Box From File m BEBE eee b Hyperlink Ctrl K amp S1562 From Scanner or Camera v BENHNEHNHNBNENHEHNENENENH v ll autoShapes 2 Select USB Video Device and click Custom Insert Insert Picture from Scanner or Camera Device USB Video Device Resolution Web Quality Print Quality Add Pictures to Clip Organizer eene 3 Click Get Picture to finish 3 Capture Pictures from Video Which picture do you want to copy Click the Capture button to creale a picture from the video Then select the picture you want to tetieva and click Get Picture to bring it into your application e 4 6 20 3 would li
10. 4 Date amp Time Setting Menu 2 Level 3 7 Level 4 Level Major Items Minor Items Adjustment Values gunetionesenptons Press ENTEH to modify the Year 00 36 values using left and right arrow keys Press ENTEH to modify the 01 12 values using left and right arrow keys Press ENTER to modify the Date amp Time values using left and right arrow keys Press ENTER to modify the values using left and right arrow keys Press ENTER to modify the values using left and right arrow keys 5 2 5 Ethernet Setting Menu 2 Level 37 Level 4 Level et Major Items Minor Items Adjustment Values pulcvon Pecctiplons DHCP On Off Enable Disable DHCP using left and right arrow keys Press ENTER to modify the IP Address 192 168 100 150 values using left and right arrow keys Press ENTER to modify the values using left and right arrow keys Press ENTER to modify the Geteway 192 168 100 254 values using left and right arrow keys Lumens English 15 5 2 6 Annotation Tools After the mouse is connected right click the mouse to start the tools lt Note gt When the setting menu is activated the tools cannot be used Annotation Description h il thumbnails Display Close the Annotation tools menu Display Close the Free hand drawing tools menu Select the line width Select pen color Clear all Free hand drawing tool Draw a rectangle e Free hand drawing tool menu Draw a polygon Draw an ellipse Eraser
11. CL510 Ceiling Document Camera User Manual English Important To download the latest version of Quick Start Guide multilingual user manual software or driver etc please visit Lumens http www lumens com tw goto htm Lumens English 1 Table of Contents Copyright Information c 4 Chapter 1 Safety Instructions cccccccsessseesseeeeeeeeecennssseeeeeeeecennseeeeees 5 SC AON IA IAA IIIA 5 BAI Ia 6 UA WA IA 6 EN55022 CE Radiation Warning cccccccsseeeeeeeceeseeeeeeeaeeeeeeeesseeeeeeeeeas 6 EN60825 Laser Warning sneivaiuientieivendasdspennwaranredxper Neuatiedperiueeinaauanswsninneays 6 SUI eee AAA sae eiieeadeanttpnetandaeadsassstadevsieyavacasteeudandakolessessaceoiecs 6 Chapter 2 Package Contents cssssssssssssssssccsnnsesssccesnsesseccennsssseccennesseseees 7 Chapter 3 Product Overview ccc sssseeneeensecceneeeeseeeeeeeesssnennnenenseceeneeeenseeees 8 3 1 Relative position of the presenter and document 8 eria bcd eem E E EA 9 Chapter 5 Remote Control and Setting Menu 10 5 1 Functions of Remote Control sssseee 10 SM ue Tt 11 Chapter 6 Descriptions of major functions 17 6 1 would like to automatically adjust the image to have best brightness and focusing performance Auto Tune ese
12. Ceiling Camera 8 Except as specifically instructed in this User Manual do not attempt to operate this product by yourself Opening or removing covers may expose you to dangerous voltages and other hazards Refer all servicing to licensed service personnel 9 Unplug the Ceiling Camera during thunderstorms or if it is not going to be used for an extended period Do not place the Ceiling Camera or remote control on top of vibrating equipment or heated objects such as a car etc 10 Unplug the Ceiling Camera from the wall outlet and refer servicing to licensed service personnel when the following situations happen n If the power cable or plug becomes damaged or frayed D If liquid is spilled into the Ceiling Camera or it has been exposed to rain or water lt Note gt Using an incorrect battery type in the remote control may result in breakdown Follow your country s instructions on how to dispose of used batteries B Precautions Warning To reduce the risk of fire or electric shock do not expose this appliance to rain or moisture If the Ceiling Camera will not be used for an extended time unplug it from the power Socket Lumens English 5 Electric Shock To reduce the risk of electric shock do not remove the cover No user serviceable parts inside Refer servicing to licensed service personnel This symbol indicates that This symbol indicates that this eguipment may contain there are important dangerous voltage which operat
13. OSD menu and return to the Mask mode 6 14 would like to enlarge a part of the image PAN Use Remote control 1 Press PAN to enter the Partial Enlarged mode 2 Press 4 v 4 or gt to move and view the partial enlarged images 3 Press PAN to exit the partial enlarged mode 6 15 would like to play the slides Slide Show 6 15 1 Setting delay time Press MENU on the Remote Control to enter the setting menu Press gt or 4 to the Storage menu Press v to find Delay Press gt or to select the delay time among 0 5 Sec 1 Sec 3 Sec 5 Sec 10 Sec Manual 5 Press MENU to exit AA 0U N 6 15 2 Activate Stop the slide show lt Note gt Upper Limit The maximum size of single photo is 7 MB 1 Press SLIDE SHOW on the Remote Control to start playing 2 Press ENTER to pause playing 3 Press ENTER again to continue playing 4 Press SLIDE SHOW again to stop playing Lumens English 21 6 16 would like to compare images compare live images with stored images PIP This function will compare and contrast a live image with a stored image Liveimage Stored image Remote control 1 Press PIP to enter the photo selection screen 2 Press 4 w 4 or gt to select the file to be compared 3 Press ENTER to activate image comparison 4 Press 4 v 4 or gt to move the live image 5 Press PLAYBACK to return to image thumbnails and compar
14. UR 100 Please restart the web browser Lumens English 36 Chapter 7 DIP Switch Settings lt Note gt You should unplug and reconnect the power cord and then restart the CL510 for all DIP switch settings to take effect Output Mode Position of DIP Switch XGA 1080P Lumens English 37 Chapter 8 Troubleshooting This chapter describes problems you may encounter while using CL510 If you have questions please refer to related chapters and follow all the suggested solutions If the problem still occurred please contact your distributor or the service center Pobem Soo Boot without power X Make sure you have plugged in the power cord signal There is no image 1 Check the power output from CL510 2 Check the settings for the source of the projector For the appropriate input selection of the projector refer to the projectors user manual Check if DIP Switch is properly set Refer to Chapter 7 DIP Switch Settings for related settings Unable to focus Probably the document is too close Press ZOOM on the Remote Control Or pull away the distance between document and lens then press AUTO TUNE Please confirm if there is any fingerprint or stain on the 7 lens Try to use AUTO TUNE to focus after cleaning the lens The image is Check the Auto Image setting of your projector Please incomplete refer to the user manual of the projector or check for the DIP SWITCH settings Forg
15. apture Time Press gt or 4 to select capture time Press v to find Capture Interval Press gt or 4 to select interval time Press MENU to exit 6 9 would like to record videos 6 9 1 Recording motion images lt Note gt You may not be able to capture or record images when Capture mode is set to Disable 1 2 6 9 2 9T ee o ce Press RECORD on the Remote Control to start recording videos Press RECORD again to stop recording Setting the image quality Press MENU on the Remote Control to enter the setting menu Press gt or to the Storage menu Press v to find Image Quality Press gt or to select among High Normal Low Press MENU to exit 6 9 3 Playing videos For playing videos please refer to 6 10 would like to view captured recorded images 6 10 would like to view captured recorded images 1 E Press PLAYBACK on the remote control to show the thumbnails of all stored files Press 4 or wv or 4 or gt to select the thumbnail you want you browse Press ENTER for the full screen display of the image Press gt or lt 4 to select different video files Press MENU to exit Lumens English 19 6 11 would like to delete the captured recorded images Press PLAYBACK on the Remote Control Press A v 4 or gt to select the file you want to delete Press DEL to display a Delete File window Press
16. are when it cannot HM verify the publisher See how this helps protect your computer A Please follow the steps below to modify security settings and re install ActiveX control components again 1 Setup steps Open the web page gt click Tools in function bar gt Internet Options gt Security gt Custom Level gt select Download Unsigned ActiveX Controls and set to Prompt gt OK Exit the Internet Option setup screen restart your IE browser and install control components according to the instructions on the screen Lumens English 41 Appendix 1 Power frequency for each country in the world PIREA Algeria 50 r fi EE BE Colombia 60 4i f amp amp Grenada 50 t wanga 50 fill Congo 50 5 FS iz Guatemala 60 Zt ia JK Antiqua 50 FF ASIN CostaRica 60 P wi Guinea 50 Fl AR f Argentina 50 Ci Cuba Jof si WiGayana 50 a Hr i Cyprus 5of5 Wat 60 jt w Wasa soje aa st Hawai 60 EE Azores 80 E i X Danomey S0 7 E F Honduras 0 116 Bahamas 60 Denma 50 Hong Korg 50 E hearan 60 2 BITE iu Domincan eo 3 Hung 0 5H Beds s0 fic Tk Sw Ecuador 60 telima 777507 R e Bermuda 60 al WIE JE Savar 6n Biliran 50 50 50 it L_ b Botswana 50 z 3k Vt Ethiopia 50 fH Sa l 50 Faeroe fe HIT Wi Bulgaria 50 Fi Fl 50 5 0 e French 0 Jn 4 X Canada 60 H It si Gam
17. ark gt For more information about the website login page please refer to Lumens HD LIVE Video 1 Settings D information a User Config LJ Network Config o PIE Maintenance 1 Click Settings 2 Click System Config 3 Setthe date and time Remark Set Manually Set the date and time manually Synchronize with Computer Time Synchronize time with the PC Synchronize with SNTP Server Synchronize time with SNTP server Synchronize Server Set SNTP Server Default recommended Time Zone Set the Time Zone Automatically adjust for daylight saving time Automatically adjust for daylight saving time 4 Select formats of date and time 5 Click OK to conform and submit Lumens English 24 6 19 would like to resume the factory default settings Factory Reset Press MENU on the Remote Control to enter the setting menu Press gt or 4 to select Advanced menu Press v to select Factory Reset Press gt or 4 to select Yes Press ENTER to activate QI dx cp Docs 6 20 Computer related functions Confirm if the device has been connected to the computer prior to use 6 20 1 would like to insert a photo in MS Paint Remark Support Windows XP Operation System only 1 Click File From Scanner or Camera in MS Paint as shown in the bottom left figure gt Capture Pictures from Video 5 untitled Paint Which picture do yeu want to copy File Edit
18. bia 50 H Jordan 5 9j Gibraltar S50 m f WHEEL Hi uE Liberia 60_ Lumens English 42 AE Luxembourg 50 E 3E Mi i Pakistan 50 iE J Tahiti 60 p EH ya IS EE iH fat JE ae Tanzania HE m 50 j f amp Peu ehm u Thailand 50 E HL Mm GG Malagasy S0 DF fE Phiippines 60 SA org Tonga T Trinidad 60 W 4 XE t PuenoRico 60 f C AA Tobago 60 HISA X 60 ib ES Saudi 50 Epi ET m m weno Ge hu YA Arabia HE ll Plot By Ase HE RE zi United m monaco sog i m scotans so x URES s Tb 2 P Sit f Venezuela 60 A HS RU un at 4 south Virgin Bee it H xix i Netherlands 50 mide Sou aoa Mam s t 78 2 8 New 50 p EE Spain 50 pu gg e zm Western po i Caledonia Samoa 50 50 50 50 50 Zealand n fe H Nigr 50 f amp fij rH Surinam 60 rt dz X fe J f Nicaragua 60 t JA Sudan 50 P of ff HL x b XKjOknawa 60 5i Switzerland 50 OJ Lumens English 43
19. e 17 6 2 would like to make text clearer and photos more colorful 17 6 3 would like to zoom in out images eeeeseeeeseeeeeeeeee 17 6 4 would like to adjust the focal length eessssssessssse 17 6 5 would like to adjust the brightness seeeeeessssseesssss 17 6 6 would like to enable or disable the laser mark 18 6 7 would like to freeze IMAGES cccceeecccceeeeeeeseeeeeeeeeseeesseeeeeesaeeeeeeeaes 18 6 8 would like to capture IMAGES cccccccseeeeeeeeeeeeeceeseeesaeeeeeeneeeeeneees 18 Lumens English 2 6 9 would like to record VIGEOS cccceeecccceeeeeeeeeeeeeeeeeeeessaeeeeenenseeesaaes 19 6 10 would like to view captured recorded images 19 6 11 would like to delete the captured recorded images 20 6 12 would like to automatically delete the stored images whenever the device is turned off Auto EraSe cccccccccseeecceecseeeeeeeeseeseeeeessaeeeeees 20 6 13 would like to use the MASK and Spotlight function 20 6 14 would like to enlarge a part of the image PAN 21 6 15 would like to play the slides Slide Show 21 6 16 would like to compare images compare live images with stored madas PIP
20. e it with other images 6 Press MENU to exit 6 17 would like to reduce the image noise Projector Type 1 This function enables Document Camera to automatically clear image noise The noise is especially obvious when Document Camera is connected to a DLP projector You can set the DLP projector to improve the image quality 2 If there is special noise when VGA out is connected please set DLP option to improve the image quality SEE Lumens English 22 2 1 Lic 2 3 2 4 2 5 Press MENU on the Remote Control to enter the setting menu Press gt or 4 to the Setting menu Press v to enter Projector Type Press gt or to select LCD DLP Press MENU to exit 6 18 would like to set the time for CL510 6 18 1 Remote control 1 0 x Oo O9 BR WD 10 Press MENU on the Remote Control to enter the setting menu Refer to 5 2 4 Date amp Time Setting Menu of 5 2 Setting Menu Press gt or 4 to select Advanced menu Press v to the Date amp Time Press ENTER to open the date amp time OSD menu Press 4 or v to the item to be set Year Month Day Hour Minute Press 4 or v to modify the value Press gt or lt 4 to move to the next item Press MENU to exit the item you have set Hepeat steps 5 through 9 until you have completed the modifications Press MENU to exit OSD menu Lumens English 23 6 18 2 To use web remote control lt Rem
21. e the Partial Enlargedmode Image comparison to compare live images with stored image files PLAYBACK Read files stored in the internal memory RECORD Record motion images Press Record to record images to the internal memory and press Record again to stop recording ROTATE Rotate the image by 0 90 180 7 270 SLIDE SHOW Show the photos or videos stored in the internal memory in slide mode ZOOM Increase or decrease the image size Lumens English 10 5 2 Setting Menu 5 2 1 Main Menu lt Remark gt Press Menu on the Remote Control to enter the setting menu The bold underlined values in the following table are defaults 1st Level 2nd Level 3rd Level Function Descriptions Major Items Minor Items Adjustment Values Automatically adjust the image to Auto Tune have the best brightness and focusing performance Automatically adjust the focal length of image 0 A Max Use the left and right arrow keys to adjust focal length on an object Use the left and right arrow keys to euguess adjust the brightness Display Rotate the image by 09 90 180 270 Normal Slide Use the left and right arrow keys to Film select the image mode Rotate Photo Text Photo Text Gray Use the left and right arrow keys to nd select the photo text gray mode Digital Zoom On Oft Use the left and right arrow keys to turn on off digital zoom Press ENTER to show the photos or videos stored in the USB disk
22. elect and then confirm by pressing ENTER Store the value of the current Preset Save Yes No image mode Use the left and right E arrow keys to select and then confirm by pressing ENTER Lumens English 13 Use the left and right arrow keys to select and then confirm by Factory Reset Yes No pressing ENTER to restore the factory defaults 5 2 2 MASK Mode Setting Menu 2 Level 3 Level 4 Level zm Major Items Minor Items Adjustment Values punction SS Uptions Adjust the transparency of the Transparency mask using left and right arrow keys Large Medium Select the step distance of the mask using left and right arrow Small keys Adjust the vertical height of the Mask Mode V Size 0 A Max mask using left and right arrow keys Adjust the horizontal length of 0 A Max the mask using left and right arrow keys Press ENTER to enter the Spotlight mode 5 2 3Spotlight Mode Setting Menu 2 Level 3 7 Level 4 Level Major Items Minor Items Adjustment Values gunetomoesenptions Adjust the transparency of the Transparency border in the Spotlight mode using left and right arrow keys Select the step distance of the spotlight zone using left and right arrow keys Large Medium Small Adjust the height of the V Size spotlight zone using left and right arrow keys Adjust the width of the spotlight 0 A Max zone using left and right arrow keys Live image Lumens English 14 5 2
23. et the password Please contact your distributor or the service center for turning on Lumens Document Lumens Document Camera Lumens and other Camera Ladibug applications cannot be executed simultaneously Only one and other application can be executed at a time Please close the applications cannot currently running applications and then execute the be used application to be used simultaneously CL510 fails to store Check to see if the stored data have reached the images or react maximum size of the USB device priority or internal memory Please make sure if the Capture function is set to Continuous mode or the time for capture is set to be long For the related setting refer to 6 8 would like to capture images of Chapter 6 Descriptions of major functions Lumens English 38 The images Press AUTO TUNE to automatically adjust to the optimal outputted from brightness and focal length CL510 are too bright dark or vague Unable to record Check to see if the stored data have reached the images maximum size of the USB disk priority or internal memory Please confirm the rotation angle You may not able to record when the image is rotated by 90 270 The operating steps in The operating steps in the manual may be not the manual are not applicable to the machine due to improvement in applicable to the functions Check to see if the Firmware version of your machine machine is up to date Please go to Lumen
24. g steps to confirm and remove the old version of ActiveX control components and then re install the ActiveX control components 2 1 Remove the components Browser IE 8 0 IE 9 0 Open the IE browser activate Tool Manage Add ons in the drop down menu of Display at the left side select All add ons Then after selecting GFFMpeg Class and GoDB Class right click the mouse to open the menu and click More Info R Click the Remove button at the bottom left and then press the Close button at the bottom right to complete the removal of components Remove the components Browser IE 7 0 Open the IE browser activate Tool Manage Add ons Enable Disable Add ons in the drop down menu of Display select Add ons that have been used by Internet Explorer Then after selecting GFFMpeg Class and GoDB Class press the Delete button at the lower right corner After reloading the website please follow the instruction on the screen Lumens cww Q A warning message Windows has blocked this software because it can t verify the publisher appears when installing the ActiveX controls as shown in the figure below Internet Explorer Add on Installer Security Warning Windows has blocked this software because it can t verify the publisher Name IPNCWebDlls CAB Publisher Unknown Publisher YI To help protect your computer Windows will block softw
25. ing and maintenance could cause electric shock instructions on this unitin the User Manual B FCC Warning This Ceiling Camera has been tested and found to comply with the limits for a Class A digital device pursuant to Article 15 J of FCC Rules These limits are designed to provide reasonable protection against harmful interference in a commercial installation B FDA Warning This Devise Complies with DHHS Radiation Rules 21CFR Chapter 1 Subchapter J B EN55022 CE Radiation Warning This product is intended for use in a commercial industrial or educational environment It is not intended for residential use This is a Class A product In a residential environment it may cause radio interference in which case the user may be required to take adequate measures The typical use is in a conference room meeting room or auditorium B EN60825 Laser Warning Laser Radiation Do Not Stare Into Beam Class 2 Laser Product B Caution Danger of explosion if battery is incorrectly replaced Replace only with same or equivalent type Dispose batteries according to manufacture s instructions Lumens English 6 Chapter 2 Package Contents Instruction for CL510 Quick Start Guide Installation For download of other language versions please visit Lumens website NS Quick Start Guide Instructions for Software Download and Remote Control USB Cable Installation VGA Cable IR extender Power Adapter
26. ke to change the setting of the CL510 and then capture a photo in MS Word Remark For Windows Office 2003 or later versions please use the function with OneNote 1 Click Insert Image From Scanner or Camera in MS Word Lumens English 26 zy Document1 Microsoft Word View Insert Format Tools Table Window Help Break Ru f 100 Page Numbers I 1 f 2 Date and Time Symbol Number Picture Jig ip are Text Box ii eee Hyperlink ctrl K From Scanner or Camera 3 LULA EFELLLELLLLLIL 2 Select Lumens Document Camera and click Custom Insert Insert Picture from Scanner or Camera Device Lumens Document Camera f Resolution Web Quality Print Quality Add Pictures to Clip Organizer O BEHBHEHNHNHENNe estom met caes 3 A window showing a live image see below will be displayed Insert Captured Image Rc b mame Capture Cancel 4 Press Capture to capture images in MS Word 5 Press Cancel to exit 6 20 4 would like to set the CL510 as a PC Camera Remark For Windows XP please set by system name USB video device Open My Computer and click Lumens Document Camera to open a live image Lumens English 27 6 21 would like to use the network remote control function gt Network has a longer distance for controlling than USB and RS232 interface do Each function of CL510 could be control
27. led and used by the browser IE 8 0 on the computer for users gt To ensure a normal operation please use IE 8 0 6 21 1 would like to view the live images or use the control keys 6 21 1 1 Login to the CL510 network control page 1 Open the web browser Internet Explorer and enter the IP address PORT number Sample http 192 168 100 150 80 Remark To check IP address please refer to 6 21 1 2 would like to check the network settings 2 Enter the account admin 3 Enter the password default password is 9999 and then click OK Username Password UU F Remember Password Submit Lumens English 28 6 21 1 2 would like to check the network settings DHCP is enabled by default Please follow the steps below to check the IP address 1 Press MENU on the Remote Control to enter the setting menu 2 Press gt or lt 4 to the Advanced menu 3 Press 4 or v to the Ethernet 4 Press ENTER to open the Ethernet OSD menu 5 Press MENU to exit OSD menu DHCP IP address 192 168 100 150 Netmask 255 255 255 0 Getway 192 168 100 254 6 21 1 3 View the live image A Use IE browser m LIVE Video t Settings D Information Lumens Please turn on the power first The Leader In Visual Presenters Please modify web page security setting and install ActiveX controls according to the instructions on the screen when using the system for the first time Lu
28. mens English 29 1 Modify web page security settings Open the web page click Tools in function bar Internet Options Security Custom Level select Download Unsigned ActiveX Controls and set to Prompt OK Internet Options 9 J 93 e R iii E E General Security ePrivacy Content Connections Programs Advanced 3 P j gt x 2 Security Settings Internet Zone x Select a zone to view or change security settings Y Y Settings tod s v 9 Enable Tul Internet Localintranet Trusted sites Restricted 4 Display video and animation on a webpage that does not use sites 9 Disable Internet Enable This zone is for Internet websites EN 19 Download signed ActiveX controls except those listed in trusted and 3 Disable restricted zones Enable not secure 9 Prompt recommended Security level for this zone af Download unsigned Activex Contro Allowed levels for this zone Medium to High Disable recommended Enable not secure poo Pw i Appropriate for most websites eer Gau Prompts before downloading potentially unsafe MI nibalze and SUipE Activex cpntraletnot marked as safe for si content Q9 Disable recommended Unsigned ActiveX controls will not be downloaded Jj Enable not secure Dramat 4 t Takes effect after you restart Internet Explorer i Custom level s ITE t PEE Cane nes t
29. o default leve Reset to Medium high default Rest BEEBE EB EERE Do fee ee e Restart your IE browser 2 Install ActiveX controls e Follow the instructions on the screen and click Install ActiveX Controls Accept the security warning and click Install Software security alert click Unblock The installation is completed 3 View the live image 4 The control method of control keys is the same as that of the remote control The button will be gray and disabled for users whose permission is view only 5 Change the size and brightness of live image Remark For more information about user permissions please refer to 6 21 2 would like to add or modify the user account B Using VLC Remark It is recommended that you download the VLC software Lumens English 30 and view with it when the number of users is more than four Besides all users must be in the same domain VLC is only provided for viewing no control keys are available 1 Activate VLC player 2 Select Media Enable the network streaming 3 Enter rtsp A B IP 8557 h264 in Please enter a network URL on the Network Page A Account Name e B Password e IP For the IP address of the Document Camera please refer to 6 21 1 2 would like to check the network settings for method of checking the IP address e Example risp admin 9999 192 168 100 150 8557 h264 4 Press Play
30. outside environment the machine will Auto Exposure X On Off adjust the brightness to the optimal condition Use the left and right arrow keys to select Regardless of outside light or color White Balance the machine will adjust the color to the optimal condition Press ENTER to activate Lumens English 12 Use the left and right arrow keys to Projector Type DLP LCD select the projector type and reduce image noise Press ENTER to show the Ethernet window For details please refer to 5 2 5 Ethernet Setting Menu English English Bie SL Traditional Chinese Deutsch German Francais French Espanol Spanish PyccKun Russian Nederlands Dutch Suomi Finnish Polski Polish Italiano Italian Portugu s Portuguese Svenska Swedish CESKY Czech f rH C Simplified Chinese Use the left and right arrow keys in OSU E ma iue Language the Language option to select the preferred language Advanced Use the left and right arrow keys to Lock Down On Off turn on off the lock down function You can set the password when On is selected Press ENTER to show the Date amp Time window For details please pale es Time refer to 5 2 4 Date amp Time Setting Menu Set the applicable power frequency Power 50Hz 60Hz depending on different regions Frequency Please refer to Appendix 1 for applicable frequency Read the value of the current Preset Load Yes No image mode Use the left and right p arrow keys to s
31. rname 2 Click Delete field to delete the user 6 21 2 3 would like to modify the user password and permissions Click Username Enter the old password in the Old Password Enter the new password in the Password Enter the password in the Confirm Password again Set the permissions in the Authority Click OK to conform and submit Dire uo pe cm 6 21 3 want to manage saved image files 1 Click Information 2 Click File list 40 LIVE Video Settings Information Filelist of Memory Storage Ium DCIM LUMNO01 LUMNO021 ipq 2012 07 03 07 136K Delete File list DCIM LUMNO1 LUMN0022 j 2012 07 03 5 37 38 105K Delete Error list 0 0023 7 2012 07 03 6 E 103K Delete DCIM LUMNO1 LUMNO024 3 2012 07 03 16 37 102K Delete VLC player 2012 07 03 6 37 48 105K Delete About 2012 07 03 16 37 5 132K Delete 2012 07 03 6 37 57 131K Delete DCIM LUMNO1 LUMNO0028 ip 2012 07 03 5 38 00 129K Delete DCIM LUMNO1 LUMNO029 73 2012 07 03 6 38 02 114K Delete 40 44 file and 78764 KBytes free P T 6 21 3 1 View image files 1 Click the file name to open the saved image file 6 21 3 2 Delete image files 1 Select the file to be deleted and click Delete Press YES Lumens English 33 to confirm 6 21 4 Firmware version Lumens HD LIVE Video Settings File list Error list VLC player About 1 Product ID Product Name 2 Software Version Current Firmware Version 3 Video Player Ver
32. s official website to check whether the latest version is available for update http www lumens com tw The steps to check the FW version are as below 2 1 Press MENU on the Remote Control to enter the setting menu 2 2 Press gt or 4 to select Advanced menu Language EN PVOon a Slava If you are not sure whether it is the latest version please consult your distributor for advice http www lumens com tw en Request form ph Unable to login to the f DHCP is enabled the IP address may not be updated network control page Please follow the steps below 1 Press MENU on the Remote Control to enter the setting menu Press gt or 4 to the Advanced menu Press 4 or v to the Ethernet Press ENTEH to open the Ethernet OSD menu Press v to find Dynamic Host Configuration Protocol Press ENTER to modify it Press 4 or v to select On Press MENU to exit the Ethernet OSD menu Lumens English 39 SA AA 9 Repeat steps 3 4 and check IP address The output image is Please refer to the Appendix 1 in the manual to confirm the not clear with water applicable power frequency and reset it according to the ripples instruction in 5 2 Setting Menu The live image does Please install the ActiveX control according to the not display after you instruction on the screen login to the website If the instruction for installing the ActiveX control does not appear please follow the followin
33. sion Current Video Player Version 4 GUI Version Current GUI version 6 21 5 Upgrade Firmware Version o Lumens HD LIVE Video B cu Information Current Firmware Version Firmware Maintenance amp Lm User Config Network Config Fumar ited AAA o System Config lt Remark gt Please download the latest firmware version from the 1 Click Settings 2 Click Maintenance 3 Click View in the Firmware upload field and select the firmware Lumens English 34 files to upgrade 4 Click UPLOAD to start upgrading 5 When the firmware files are uploaded all files in the built in memory will be deleted If you want to store the files click Cancel to cancel upgrading You should proceed upgrading only after the file back up is completed If the files don t need to be stored click Yes to start upgrading HD LIVE Video e Settings information User Config E Neto Cong Comes and Set Unda Ea E Si System Config Delete all files A All files in the built in memory will be deleted Maintenance Are you sure you want to proceed firmware upload 6 When the upgrading procedure processes to Step 3 3 please follow the instruction on the screen to login the Administrator Account 7 When the installation is completed please close the IE Browser and then open IE Browser again to start network connection Lumens English 35 Firmware Maintenance 100 E

English

Contents

Download Pdf Manuals

Related Search

Related Contents