Here - VIZIO
Contents
1. 20 Adjusting the Equalizer Settings 20 Adjusting Bass and Treble Levels 21 Adjusting the Speaker Balance 21 Enabling or Disabling the Built In Speakers 22 Selecting the Digital Output Mode 22 Changing the Audio Language 23 Resetting the Audio Settngs 23 Adjusting the Picture Settings 24 Changing the Picture Mode RL 24 Adjusting the Noise Reduction Setting 25 Enabling or Disabling Fast Response 25 Enabling or Disabling the Ambient Light Sensor 25 Resetting the Picture Settings 26 Setting the Parental Controls 26 Enabling or Disabling Program Ratings 26 Locking and Unlocking Channels 26 Blocking and Unblocking Content by Rating 27 E190VA E220VA E260VA E261VA Changing the Parental Control Passcode Legal amp Compliance O 35 Resetting the Co2. f an earthquake occurs and the TV is not properly secured Your TV comes in the box with the base already attached Use the following instructions if you need to reattach the base To install the TV stand 1 Place the TV screen down on a clean flat surface To prevent scratches or damage to the screen place the TV on VIZIO Razor LED LCD HDTV with Stand a soft surface such as carpet rug or blanket 2 Align the stand hooks with the holes on the bottom of the TV RAZOR LED LCD HDTV QUICK START GLEDE Quick Start Guide Remote Control with Batteries Package Contents E190VA E220VA E260VA E261VA Be sure the mount you choose is capable of supporting the weight of the TV After you have determined that you have the correct mount for your TV you can begin the installation 3 Slide the base plate into the slot on the stand until it snaps into place To install your TV on a wall 1 Disconnect any cables connected to your TV 4 Move the TV with attached stand into an upright position and place on a flat level and stable surface 2 Place the TV face down on a clean flat stable surface Be sure the surface is clear of debris that can scratch or damage the TV 5 To ensure proper ventilation leave 1 of space between the back of the TV and any other objects walls etc 3 Pull up on the locking clip then release it Remove the base by gently sliding it away from the T
3. 4 Use the Arrow buttons to highlight Channel Name Edit and press MENU OK o Highlight the name of the channel you want to customize and press MENU OK The on screen keyboard is displayed 6 Use the Arrow and MENU OK buttons to Edit channel name in channel list spell the custom channel name When you are finished highlight OK and press MENU OK EXIT 7 Press EXIT E190VA E220VA E260VA E261VA Changing the On Screen Menu Language setting the TV s Date and Time Your TV can display the on screen menu in different languages From the Date amp Time menu you can To change the on screen menu language Set the time zone e Adjust the time for daylight savings 1 Press the MENU button on the remote The on screen menu is displayed vm e Enable or disable automatic date and time updates 2 Use the Arrow buttons on the remote to Ma highlight the TV icon and press MENU OK The TV Settings menu is displayed Francais Mme ons EEEEEEEEESUT UH o To set the time zone 3 Use the Arrow buttons to highlight Menu Language and press MENU OK 1 Press the MENU button on the remote The on screen menu is displayed 2 Use the Arrow buttons on the remote to ARE highlight the TV icon and press MENU 1 OK The TV Settings menu is displayed 4 Use the Arrow buttons to highlight your preferred language and press MENU OK 5 Press EXIT 3 Use the Arrow buttons to highl
4. a channel is available a check mark is displayed next to the channel To remove a channel from the list highlight the channel and press MENU OK When the channel has been removed the checkmark next to the channel will disappear To add all available channels to the list highlight Mark All and press MENU OK v To remove all available channels from the list highlight Unmark All and press MENU OK To include only digital channels in the list highlight Digital Only and press MENU OK 6 Press EXIT 4 Master Lists Unmark Alt Digtal UN mama up select previous item down select next item EXIT Scanning for New or Additional Channels When a new channel becomes available in your area you do not have to rescan all channels to add the new channel Using the add channel feature you can restrict the scan to new channels only This is useful because your master channel list settings are preserved To scan for new channels 1 Press the MENU button on the remote The on screen menu is displayed 2 Use the Arrow buttons on the remote to highlight the TV icon and press MENU OK The TV Settings menu is displayed 3 Use the Arrow buttons to highlight Channels and press MENU OK 4 Use the Arrow buttons to highlight Additional Scan 5 Use the Left Right Arrow buttons to change the option to On or Off 6 Perform 8 channel scan See Scanning for Channels on page 12 M
5. used when the TV is connected to a home audio system formats to PCM audio You may want to use this option if you have an older audio receiver connected to the TV To enable or disable the built in speakers 1 Press the MENU OK button on the remote The on screen menu is displayed to an audio receiver VIZIO recommends you set this option to Auto A This option only affects audio output from the coaxial or optical port To select the digital output mode If you are unfamiliar with audio formats or your TV is not connected ruSurro r 2 Usethe Arrow buttons to highlight Audio and press MENU OK 3 Usethe Arrow buttons to highlight Speakers and press MENU OK 1 Pressthe MENU OK button on 4 Pressthe Right Left Arrow buttons to the remote The on screen menu is select On or Off and press EXIT e a T displayed huno 2 Use the Arrow buttons to highlight Digital MTS Audio and press MENU OK Reset Audio Mode 3 Use the Arrow buttons to highlight Digital Audio Out and press MENU OK Turn the bullt in speakers On Off 4 Use the Arrow buttons to highlight Auto or Force PCM and press EXIT MENU OK 5 Press EXIT Force PCM EXIT 22 E190VA E220VA E260VA E261VA Changing the Audio Language Some digital free to air and cable channels broadcast programs in more than one language The MTS Multichannel Television Sound feature allows you to listen to audio in your pr
6. 3 5mm Audio Connect headphones powered speakers or other 3 5mm audio device Composite AV Connect external device DVD player game console etc with a composite AV cable USB Connect USB thumb drive to play photo slideshow or to update firmware Rear Panel Optical Audio RGB AC IN HDMI 1 2 Component Cable Antenna Optical Audio HDMI 1 2 Cable Antenna Component Rear Panel Connect to audio device VIZIO sound bar home theater system Connect 1 8 mini stereo connector from computer Connect RGB cable from computer Connect the included Power Cable here Connect the other end of the cable to an electrical outlet Connect external device Blu Ray DVD player game con sole etc Connect component video audio devices Connect coaxial cable for external antenna or cable TV E190VA E220VA E260VA E261VA Remote Control INPUT TV AV COMP HDMI SLEEP WIDE CC EXIT Menu OK Arrow Left Volume Up Down Power Standby Input Specific Closed Caption CC Exit Arrow Up Arrow Right Arrow Down Channel Up Down Mute Number Pad VR10 Remote Control E190VA E220VA E260VA E261VA Input Input Specific Power Standby Sleep Wide Closed Caption Exit Arrow Menu OK Volume Up Down Channel Up Down Mute Last Number Pad Info Dash Change the input device With each press of the button the TV will displa
7. E220VA E260VA E261VA setting Up Channels From the channel menu you can e Change the signal source e Customize the master channel list e Scan for new additional channels e Start anew channel scan e Customize channel names Changing the Signal Source Using this option you can change the signal source for the coaxial TV input To change the signal source T Press the MENU button on the remote The on screen menu is displayed iram x Use the Arrow buttons on the remote to highlight the TV icon and press MENU OK The TV Settings menu is displayed Master Lists Additional scan Ott Use the Arrow buttons to highlight Channels and press MENU OK Use the Arrow buttons to highlight Signal source Use the Arrow buttons to change the setting to Cable or Antenna Press EXIT Signal Source E190VA E220VA E260VA E261VA Customizing the Master Channel List By customizing the master channel list you can choose which channels can be displayed 1 Press the MENU button on the remote The on screen menu is displayed 2 Use the Arrow buttons on the remote to highlight the TV icon and press MENU OK The TV Settings menu is displayed 3 Use the Arrow buttons to highlight Channels and press MENU OK 4 Use the Arrow buttons to highlight Master Lists then press MENU OK The master channel list is displayed 5 To add a channel to the list highlight the channel and press MENU OK When
8. Menu to select this feature EXIT Viewing a USB Photo Slideshow Your player features a USB port where you can connect and share a USB thumb drive containing your photos Navigating the On Screen Menu To open the on screen menu press the The TV supports the following file types MENU OK button on the remote Use the Arrow buttons to highlight a menu Media Type File Types option and press the MENU OK button to select that option Images To play USB media you must first save your images onto a USB thumb drive 16 E190VA E220VA E260VA E261VA Remember e The USB thumb drive must be formatted as FAT32 e Files on the USB thumb drive must be a supported file type e The USB thumb drive must have a minimum 1GB memory TheTV will not play media from external hard drives or mp3 players To play your USB media jm Load your photos onto a USB thumb drive using your home computer Vici Settings Insert the USB thumb drive into the USB port on the left side of the TV The E photos on your USB thumb drive will be displayed automatically Timer If your thumb drive is already inserted continue with step 3 9 lt 2 Audio Picture Press the MENU button on the remote The on screen menu is displayed F Use the Arrow buttons on the remote to highlight the Photo icon and press Input Help MENU OK The Photo screen is displayed Menu to selsct this feature Use the Arrow buttons o
9. enabled the ambient light sensor detects the light levels in the room to activated the resulting picture usually has softer edges optimize the brightness of the TV s backlight USE MIC a RITU When the ambient light sensor is enabled you will be unable to 1 Press the MENU OK button on manually change the TV s brightness settings the remote The on screen menu is Wiel Y displayed To enable or disable the ambient light sensor 2 Usethe Arrow buttons to highlight 1 Pressthe MENU OK button on Picture and press MENU OK the remote The on screen menu is Vizi Medium displayed 3 Use the Arrow buttons to highlight Noise Reduction and press MENU OK 2 Use the Arrow buttons to highlight a EN Picture and press MENU OK Madii Fast Response Om 3 Usethe Arrow buttons to highlight Ambient Light Sensor 4 Usethe Arrow buttons to highlight Off Low Medium or High then press MENU OK 4 Use the Left Right Arrow buttons to 5 Press EXIT change the setting to Off or On Enabling or Disabling Fast Response 5 Press EXIT Enabling the Fast Response setting can often improve PC and console gaming experiences To enable or disable Fast Response Ambient Light Sensor 1 Press the MENU OK button on the remote The on screen menu is Vici 2 displayed Picture 2 Usethe Arrow buttons to highlight ei y Picture and press MENU OK T EXIT Noise Reducti
10. is hereby granted free of charge to any person obtaining a copy of any such software and associated documentation files the Open Source Software to deal in the Open Source Software without restriction including without limitation the rights to use copy modify merge publish distribute sublicense and or sell copies of the Open Source Software and to permit persons to whom the Open Source Software is furnished to do so subject to the following conditions THE SOFTWARE IS PROVIDED AS IS WITHOUT WARRANTY OF ANY KIND EXPRESS OR IMPLIED INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF ERCHANTABILITY FITNESS FOR A PARTICULAR PURPOSE AND NONIN FRINGEMENT IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM DAMAGES OR OTHER LIABILITY WHETHER IN AN ACTION OF CONTRACT TORT OR OTHERWISE ARISING FROM OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE 35 36 E190VA E220VA E260VA E261VA 3 E190VA E220VA E260VA E261VA 38 TRADEMARKS SHOWN ARE THE PROPERTY OF THEIR RESPECTIVE OWNERS IMAGES USED ARE FOR ILLUSTRATION PURPOSES ONLY VIZIO THE V LOGO WHERE VISION MEETS VALUE AND OTHER VIZIO TRADEMARKS ARE THE INTELLECTUAL PROPERTY OF VIZIO INC PRODUCT FEATURES AND SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE 2011 VIZIO INC ALL RIGHTS RESERVED 110920ST B
11. manufacturer is not responsible for any radio or TV interference caused by unauthorized modification to this equipment It is the responsibilities of the user to correct such interference FCC warning Changes or modifications not expressly approved by the party responsible for compliance with the FCC Rules could void the user s authority to operate this equipment Caution Always use an AC DC power adapter that is properly grounded Use the AC cords listed below for each area USA UL Canada CSA Germany VDE UK BASE BS Japan Electric Appliance Control Act Open Source Software Notice Your VIA device may contain GPL executables and LGPL libraries that are subject to the PL2 0 LGPL2 1 License Agreements VIZIO offers to provide source code to you on CD ROM for a processing fee covering the cost of performing such distribution such as the cost of media shipping and handling upon request made to VIZIO at www VIZIO com This offer is valid for a period of three 3 years from the date of the distribution of this VIA device by VIZIO You can obtain a copy of the GPL LGPL licenses from http www gnu org licenses old licenses gpl 2 0 html and http www gnu org licenses oldlicenses Igpl 2 1 html You can also obtain a copy of gSOAP public license from http www cs fsu edu engelen license html Please visit www VIZlO com for attribution of copyrights to any open source software on your VIZIO VIA device Permission
12. reasonable protection against harmful interference in a residential installation This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions may cause harmful interference to radio communications However there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception which can be determined by turning the equipment off and on the user is encouraged to try to correct the interference by one or more of the following measures 1 Reorient or relocate the receiving antenna 2 Increase the separation between the equipment and receiver 3 Connect the equipment into an outlet on a circuit different from that to which the receiver is connected 4 Consult the dealer or an experienced radio TV technician for help This device complies with Part 15 of the FCC Rules Operation is subject to the following two conditions 1 this device may not cause harmful interference and 2 this device must accept any interference received including interference that may cause undesired operation Notice 1 The changes or modifications not expressly approved by the party responsible for compliance could void the user s authority to operate the equipment 2 Shielded interface cables and AC power cord if any must be used in order to comply with the emission limits 3 The
13. this apparatus near water e Clean only with a dry cloth Do not block any ventilation openings Install in accordance with the manufacturer s instructions e Do not install near any heat sources such as radiators heat registers stoves or other apparatus including amplifiers that produce heat e Do not defeat the safety purpose of the polarized or grounding type plug A polarized plug has two blades and a third grounding prong The wide blade or the third prong are provided for your safety If the provided plug does not fit into your outlet consult an electrician for replacement of the obsolete outlet e Protect the power cord from being walked on or pinched particularly at plugs convenience receptacles and the point where they exit from the apparatus e Only use attachments accessories specified by the manufacturer e Use only with the cart stand tripod bracket or table specified by the manufacturer or sold with the apparatus When a cart is used use caution when moving the cart apparatus combination to avoid injury from tip over e Unplug this apparatus during lightning storms or when unused for long periods of time e Refer all servicing to qualified service personnel Servicing is required when the apparatus has been damaged in any way such as when the power supply cord or plug is damaged liquid has been spilled or objects have fallen into the apparatus the apparatus has been exposed E190VA E220VA E2
14. to 9 00PM Monday through Friday and 8 00AM to 4 00PM Saturday and Sunday Pacific Time or visit www VIZIO com PRE AUTHORIZATION MUST BE OBTAINED BEFORE SENDING ANY PRODUCT TO A VIZIO SERVICE CENTER Proof of purchase in the form of a purchase receipt or copy thereof is required to show that a Product is within the warranty period Parts and Labor There will be no charge for parts or labor during the warranty period Replacement parts and Products may be new or recertified at VIZIO s option and sole discretion Replacement parts and Products are warranted for the remaining portion of the original warranty or for ninety 90 days from warranty service or replacement whichever is greater Type of Service Defective Products must be sent to a VIZIO service center to obtain warranty service VIZIO is not responsible for transportation costs to the service center but VIZIO will cover return shipping to the customer PRE AUTHORIZATION IS REQUIRED BEFORE SENDING ANY PRODUCT TO A VIZIO SERVICE CENTER FOR WARRANTY SERVICE Product returns to VIZIO s service centers must utilize either the original carton box and shipping material or packaging that affords an equal degree of protection VIZIO Technical Support will provide instructions for packing and shipping the covered Product to the VIZIO service center Limitations and Exclusions VIZIO s one year limited warranty only covers defects in materials and workmanship This warranty does not cov
15. to constitute a risk of electrical shock to persons Television Antenna Connection Protection If an outside antenna satellite dish or cable system is to be connected to the TV make sure that the antenna or cable system is electrically grounded to provide some protection against voltage surges and static charges Article 810 of the National Electrical Code ANSI NFPSA 70 provides information with regard to proper grounding of the mast and supporting structure grounding of the lead in wire to an antenna discharge unit size of the grounding conductors location of antenna discharge unit connection to grounding electrodes and requirements of the grounding electrode Lightning Protection For added protection of the TV during a lightning storm or when it is left unattended or unused for long periods of time unplug the TV from the wall outlet and disconnect the antenna or cable system Power Lines Do not locate the antenna near overhead light or power circuits or where it could fall into such power lines or circuits Remember the screen of the coaxial cable is intended to be connected to earth in the building installation Ground Clamp Antenna Lead In Wire Antenna Discharge Unit NEC Section 810 20 Grounding Conductors NEC Section 810 21 Ground Clamps Power Service Grounding Electrode System NEC ART 250 part H Electric Service Equipment E190VA E220VA E260VA E261VA DTV Transition Advisory
16. to see e Analog Closed Caption for analog NTSC TV channels e Digital Closed Caption for digital ATSC TV channels 4 After highlighting the type of closed captions you wish to see use the Arrow buttons on the remote to select the caption channel you wish to display then press MENU OK ae Caption channels usually display different languages For example _ CC1 may display English captions and CC2 may display Spanish captions T Changing the Appearance of Digital Closed Captions Digital closed captions can be displayed according to your preference To change the appearance of digital closed captions 1 From the Closed Caption menu use the Arrow buttons to highlight Digital 4 Y es oe 4 Digital CC Style pasa aaao 2 Use the Left Right Arrow buttons on Ru the remote to select Custom then Bal press OK The Digital CC Style menu appears u nn BG Color 3 Usethe Up Down Arrow buttons on the remote to highlight the setting you wish to change then use the Arrow buttons to change the setting amerma e Caption Style Choose a custom Reset Delal preset caption style e Text Size Adjust the size of the text e Color Change the color of the text e Opacity Change the transparency of the text e BG Color Change the background color e BG Opacity Change the transparency of the background e Window Color Change the edge color e Window Opa
17. volume level on the new input source is higher or lower than the level on the source you switch from the difference may be noticable e Use the Volume Up Down buttons on the remote to adjust the volume When change input source the display image changes size e The TV remembers the viewing mode on each input source If the viewing mode on the new input source differs from the one on the input source you switch from the difference may be noticable 31 specifications Screen Size Diagonal Viewable Dimensions w Stand w o Stand Weight w Stand w o Stand TV Type Refresh Rate Maximum Resolution Dynamic Contrast Ratio Response Time Brightness HDMI Inputs Component Video Inputs Composite Inputs RF Antenna Input USB Ports RGB Inputs OSD Language Audio Outputs Number of Speakers Watts Channel Simulated Surround Sound Leveler 32 E190VA 19 Class 18 5 18 01 x 12 54 x 4 28 18 01 x 12 54 x 2 29 7 5 Ibs 6 7 Ibs Edge Lit LED 60 Hz 1366 x 768 20 000 1 o ms 250 nits 2 1 4 4 English Spanish French Optical Digital Audio Out 3 5mm 2 SW SRS TruSurround HD SRS TruVolume E220VA 22 Class 20 60 x 14 10 x 5 10 20 60 x 14 10 x 2 27 9 2 lbs 8 2 lbs Edge Lit LED 60 Hz 1920 x 1080 20 000 1 o ms 250 nits 2 1 4 4 English Spanish French Optical Digital Audio Out 3 5mm 2 SW SRS TruSurround HD SRS T
18. 60VA E261VA to rain or moisture does not operate normally or has been dropped Unplug the power cord before cleaning your TV When moving your TV from an area of low temperature to an area of high temperature condensation may form in the housing Wait before turning on your TV to avoid causing fire electric shock or component damage A distance of at least three feet should be maintained between your TV and any heat source such as a radiator heater oven amplifier etc Do not install your TV close to smoke Operating your TV close to smoke or moisture may cause fire or electric shock Slots and openings in the back and bottom of the cabinet are provided for ventilation To ensure reliable operation of your TV and to protect it from overheating be sure these openings are not blocked or covered Do not place your TV in a bookcase or cabinet unless proper ventilation is provided Never push any object into the slots and openings on your TV cabinet Do not place any objects on the top of your TV Doing so could short circuit parts causing a fire or electric shock Never spill liquids on your TV Your TV should be operated only from the type of power source indicated on the label If you are not sure of the type of power supplied to your home consult your dealer or local power company Do not apply pressure or throw objects at your TV This may compromise the integrity of the display The manufacturer s warranty does not cover us
19. Chart Adjusting the TV Settings From the TV Settings Menu you can e Change the input source e Setup channels e Change the on screen menu language e Change the TV s date and time e Adjust the TV settings for use with a PC Changing the Input Source External devices such as DVD players Blu Ray Players and video game consoles can be connected to your TV To use one of these devices with your TV you must first change the input source in the on screen menu To change the input device 1 Press the MENU button on the remote The on screen menu is displayed 2 Usethe Arrow buttons on the remote to highlight the TV icon and press MENU OK 3 Use the Arrow buttons to highlight Input source and press MENU OK 4 Usethe Arrow buttons on the remote to highlight the input source you wish to display then press MENU OK 5 Press EXIT EXIT You can also change the input device by pressing the INPUT button on the remote or by selecting the INPUT icon from the on screen menu i Customizing and Removing Input Names When you have multiple devices connected to your TV it can become difficult to remember the inputs to which they are connected Your TV features the ability to customize the names of these inputs to make them easy to remember Custom names have a 10 character limit For example HDMI 1 could be renamed as My Blu ray You can also remove unused inputs from the input list making se
20. LY TO YOU THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS AND YOU MAY ALSO HAVE OTHER RIGHTS WHICH VARY FROM STATE TO STATE THIS WARRANTY IS SUBJECT TO CHANGE WITHOUT NOTICE CHECK WWW VIZIO COM FOR THE MOST CURRENT VERSION Personal Data If your VIZIO product is capable of storing personal data and other information ALL CONTENTS AND INFORMATION WILL BE DELETED IN THE COURSE OF SOME IN HOME AND ALL SHIP IN WARANTY SERVICE If this occurs your product will be restored to you configured as originally purchased You will be responsible for restoring all applicable data and passwords Recovery and reinstallation of user data is not covered under this Limited Warranty In order to protect your personal information VIZIO recommends that you always clear all personal information from the unit before it is serviced regardless of the servicer Zero Bright Pixel Defect Guarantee This policy covers zero bright pixel defects for the duration of the limited ONE YEAR WARRANTY on select new product purchases To determine if this guarantee applies to your product refer to the DETAILS tab of the model s product information page www VIZIO com or look for the zero bright pixel guarantee on the box Legal amp Compliance FCC Class B Radio Interference Statement NOTE This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules These limits are designed to provide
21. Mode Your TV display can be adjusted to suit your preferences and viewing conditions To change the picture mode 1 Press the MENU OK button on the remote The on screen menu is vici displayed Picture Mode 2 Usethe Arrow buttons to highlight Picture and press MENU OK SS ONE 3 Use the Arrow buttons to highlight Picture Mode and press MENU OK 4 Use the Arrow buttons to highlight one of the following options then press MENU OK e Home Sets the various picture settings to values that will produce the best picture in the most cases This is the recommended setting Home Game Optimizes the picture settings for displaying game console output EXIT e Movie Sets the picture settings to values perfect for watching a movie in a dark room e Retail Sets the picture settings to values that produce a brighter 24 E190VA E220VA E260VA E261VA more vivid picture Photo Optimizes the picture settings for viewing photo slideshows Flesh tones should appear more natural Custom Allows you to manually change each of the picture settings Brightness Adjusts the black level of the picture When this setting is too low the picture may be too dark to distinguish details When this setting is too high the picture may appear faded or washed out Contrast Adjusts the white level of the picture When this setting is too high the picture may appear dark When this settin
22. O O Q O O O O Q Panoramic Stretch O O Q O O E190VA E220VA E260VA E261VA To adjust the screen aspect ratio Adjusting the Audio Settings 1 Press the MENU OK button on the remote The on screen menu is Using the Audio Settings menu you can adjust the following displayed Enable or disable SRS TruSurroundHD 2 Usethe Arrow buttons on the remote to highlight the Wide icon and press Enable or disable SRS TruVolume OK The Wide menu is displayed Adjust the equalizer settings 3 Usethe Left Right Arrow buttons on the remote to highlight the screen e Adjust bass and treble levels mode you want to display then press MENU OK Adjust speaker balance e Normal preserves the content s original aspect ratio Since the 4 3 e Enable or disable the built in speakers aspect ratio is not large enough to fill the TV s screen black bars are Sel kediaitalaudi d added to the left and right of the display image elect the digital audio output mode e Wide stretches a 4 3 aspect ratio picture to the edges of the screen Change the audio language Since the picture is being stretched the display image may appear e Reset the audio settings distorted If the program is already formatted for widescreen viewing 1 85 1 or 2 35 1 then black bars will appear on the top and bottom of Enabling or Disabling SRS TruSurroundHD the display image TruSurround HD is a robust multichannel virtualization technology developed e Zoom exp
23. The nationwide switch to digital television broadcasting was complete on June 12 2009 Analog only television sets that receive TV programming through an antenna now need a converter box to continue to receive over the air TV Watch your local stations to find out when they will turn off their analog signal and switch to digital only broadcasting Analog only TVs should continue to work as before to receive low power Class A or translator television stations and with cable and satellite TV services gaming consoles VCRs DVD players and similar products For additional information please contact the parties listed below as appropriate FCC US Federal Communications Commission Web www fcc gov Phone 1 888 CALL FCC 1 888 225 5322 TTY 1 888 TELL FCC 1 888 835 5322 Fax 1 866 418 0232 E mail fccinfo fcc gov NTIA National Telecommunications and Information Administration Web www ntia doc gov Phone 1 888 DTV 2009 1 888 388 2009 List of US Television Stations www high techproductions com usTVstations htm RS Your TV comes with a built in tuner capable of processing digital broadcasts No extra converter box is needed F Table of Contents Installing the TV 1 Inspecting the Package Contents 1 Hl ii MIR rc I n 1 Installing the TV MO u 1 Instal
24. USA movie broadcasts CAN English Canadian English television program broadcasts CAN French Canadian French television program broadcasts 2 Foreach rating type you want to block or unblock use the Up Down and Left Right Arrow buttons on the remote to highlight the rating type and press OK 3 Whenthe rating type is blocked the Lock icon appears locked Content with this rating cannot be viewed 4 Whenthe rating type is unblocked the Lock icon appears unlocked Content with this rating can be viewed 5 Ifyou want to block all unrated content highlight Block Unrated Shows and use the Arrow buttons on the remote to select On 6 When you are finished adjusting the rating level blocks press the EXIT button on the remote Changing the Parental Control Passcode If you use the parental controls you should change the passcode to prevent children from accessing inappropriate material 1 From the Parental Controls menu highlight Change PIN and press OK The Change PIN menu is displayed In the New Pin fleld use the Number Pad on the remote to enter your new 4 digit parental control passcode In the Confirm Pin fleld use the Number Pad on the remote to re enter your new 4 digit parental control passcode Write down your new parental control passcode and save it in a secure location Press the EXIT button on the remote Resetting the Content Locks To reset the content locks to the factory default settin
25. V Installing the TV on a Wall To mount your TV on a wall you will need a wall mount Consult the information below to find the appropriate mount for your TV model E190VA E220VA E260VA wall carefully following the instructions Screw Length that came with your mount Use only with a UL listed wall Hole Pattern 75mm x 75mm 75mm x 75mm 100mm x 100mm mount bracket rated for the weight load of this TV See Appendix A Specifications for the weight of this TV A Installing a TV on a wall requires lifting To prevent injury or damage to the TV ask someone to help you Controls and Connections Front Panel Right Side Panel Ambient Light Sensor Power Menu Channel Up Down Remote Control Sensor Volume Up Down Front Panel Input Remote Control When using the remote point it directly at this sensor Sensor Right Side Panel Ambient Light Activate through the on screen menu When activated Left Side Panel Sensor the sensor adjusts the brightness of the TV based on the light level in the room On E220VA E260VA and E261VA the sensor is on the front of the TV Power Turn the TV on or off 3 5mm Audio L Menu Display on screen menu Channel Up Down Change the channel Volume Up Down Increase or decrease the loudness of the TVs audio Input Change the input device With each press of the button the TV will display a different input source Composite AV Left Side Panel
26. VIZIO TANAY RAZOR LED LCD HDTV E190VA E220VA E260VA E261VA USER MANUAL SISS sSrse TruSurround HD TruVolume SRS TruSurround HD and SRS TruVolume are trademarks of SRS Labs Inc TruSurround HD and TruVolume technologies are incorporated under license from SRS Labs Inc ENERGY STAR This product qualifies for ENERGY STAR in the factory default setting and this is the setting in which power savings will be achieved Changing the factory default picture settings or enabling other features will increase power consumption that could exceed the limits necessary to qualify for ENERGY STAR rating HOM HIGH DEFINITION MULTIMEDIA INTERFACE HDMI the HDMI logo and High Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC Welcome Thank You for Choosing VIZIO My Product Information And congratulations on your new VIZIO HDTV To get the most out of your new VIZIO product read these instructions before using your product and retain them for future reference Be sure to inspect the package contents to ensure there are no missing or damaged parts Product Registration To purchase or inquire about accessories and installation services for your VIZIO product visit our website at www VIZIO com or call toll free at 1 888 849 4623 We recommend that you either e Register your VIZIO product at www VIZIO com e Complete the enclosed registration card
27. an be adjusted to distribute the sound between the left and liking right speakers To adjust the speaker balance A To adjust the bass and treble levels you must disable SRS TruSurroundHD and change the Equalizer Settings to Off 1 Press the MENU OK button on the remote The on screen menu is To adjust the bass and treble levels displayed 1 Press the MENU OK button on 2 Use the Arrow buttons to highlight the remote The on screen menu is vici Audio and press MENU OK displayed ECS did 3 Use the Arrow buttons to highlight 2 Use the Arrow buttons to highlight Balance and press MENU OK Audio and press MENU OK Kj 5 X OU 4 Usethe Arrow buttons to adjust the 3 Usethe Arrow buttons to highlight speaker balance Bass amp Treble and press MENU OK To increase the loudness of the right speaker increase the balance 4 Usethe Arrow buttons to highlight setting Bass or Treble and press MENU OK e To increase the loudness of the left speaker decrease the balance setting 5 Use the Left Right Arrow buttons to increase or decrease the level When you are finished press EXIT Adjust Bass Level EXIT 21 E190VA E220VA E260VA E261VA Enabling or Disabling the Built In Speakers Selecting the Digital Output Mode Using this menu option you can turn the built in speakers on or off This is often Using this menu option you can force the TV to downsample unsupported audio
28. and mail it Extended Warranties For peace of mind and to protect your investment beyond the standard warranty Enter your product information here for easy reference VIZIO offers on site extended warranty service plans These plans provide additional coverage during the standard warranty period To purchase an extended Model Number warranty service plan visit www VIZIO com Serial Number When Reading this Manual pare ian Sa When you see this symbol please read the accompanying important VIZIO recommends you attach your sales receipt to this manual for safekeeping warning or notice It is intended to alert you to the presence of important operating instructions When you see this symbol please read the accompanying helpful tip Attach Sales Receipt Here Important Safety Instructions Your DTV is designed and manufactured to operate within defined design limits Misuse may result in electric shock or fire To prevent your TV from being damaged the following instructions should be observed for the installation use and maintenance of your TV Read the following safety instructions before operating your TV Keep these instructions in a safe place for future reference e To reduce the risk of electric shock or component damage switch off the power before connecting other components to your TV e Read these instructions e Keep these instructions e Heed all warnings Follow all instructions e Donotuse
29. and time 6 Press EXIT 6 Press EXIT Enabling or Disabling Automatic Date and Time Updates The current date and time is broadcast digitally in many areas Your TV can automatically set the time and date using this information When this setting is enabled you cannot manually set the date and time To enable or disable automatic updates 1 Press the MENU button on the remote The on screen menu is displayed 2 Usethe Arrow buttons on the remote to highlight the TV icon and press MENU OK The TV Settings menu is displayed Use the Arrow buttons to highlight Date amp Time and press MENU OK Use the Arrow buttons to highlight Auto Update Use the Arrow buttons to change the setting to Enable or Disable po D oum UMS Press EXIT 14 E190VA E220VA E260VA E261VA Adjusting the TV Settings for Use with A PC Your TV can be used to display output from a home computer using the RGB port These settings are only available when viewing content from the RGB port To adjust the PC settings 1 Press the MENU button on the remote The on screen menu is displayed Vv ici x 2 Usethe Arrow buttons on the remote to MILI EMEN highlight the TV icon and press MENU AUTO Sync OK The TV Settings menu is displayed re s Vertical Position aA 79 3 Use the Arrow buttons to highlight PC a 3 setting and press MENU OK Jin D 4 Use the Arrow and MENU OK buttons to adjust each of the fol
30. ands images with black bars to fit the screen by SRS Labs that provides an enhanced listening experience unlike any other e Panoramic expands the display image to fill the screen Images may technology offered for a two speaker playback environment appear wider than intended If you are watching widescreen 1 85 1 To enabl disable SRS TruS dHD or 2 35 1 content black bars will still appear on the top and bottom SO ane of the display image This option is only available when the TV is 1 Press the MENU OK button on displaying a 480i 480p source the remote The on screen menu is e Stretch expands the display image to fill the screen Images may displayed appear wider than intended If you are watching widescreen 1 85 1 201 content black bars wil still appear athe top and bottom iib QUE ATOW ELLOS SI of the display image This option is only available when the TV is Audio and press MENU OK Bass amp Treble displaying a 720p 1080i 1080p source 3 Use the Arrow buttons to highlight ance su SRS TruSurround HD 4 Pressthe Right Left Arrow buttons to unie select On or Off and press EXIT Reset Audio Mode Turn 5R5 TruSurround HD On or Off If OFF is selected Equalizer settings are avaiable EXIT 19 E190VA E220VA E260VA E261VA Enabling or Disabling SRS TruVolume Adjusting the Equalizer Settings SRS TruVolume intelligen
31. aster Lists Additional Scan Of Additional Scan EXIT 11 Scanning for Channels Before the TV can detect and display channels and their associated information you must scan for channels A channel scan may also be necessary when the TV has been moved to an area where different free to air broadcast television channels are available To scan for channels 1 Press the MENU button on the remote The on screen menu is displayed Vic 2 Use the Arrow buttons on the remote to highlight the TV icon and press MENU OK The TV Settings menu is displayed 3 Use the Arrow buttons to highlight Channels and press MENU OK 4 Use the Arrow buttons to highlight Channel Scan and press MENU OK 5 Use the Arrow buttons to highlight On and press MENU OK The channel scan begins 6 Wait for the channel scan to reach 100 then press EXIT EXIT 12 E190VA E220VA E260VA E261VA Customizing Channel Names Your TV features the ability to customize channel names making them easy to identify Custom names have a 10 character limit For example KBOT DT could be renamed as Favorite To customize a channel name 1 Press the MENU button on the remote The on screen menu is displayed 2 Use the Arrow buttons on the remote to highlight the TV icon and press MENU OK The TV Settings menu is displayed 3 Use the Arrow buttons to highlight Channels and press MENU OK Channel Name Edit
32. city Change the edge type e Reset Default Restore closed caption settings to factory defaults 4 When you are satisfied with the appearance of the closed captions press the EXIT button on the remote 29 Troubleshooting amp Technical Support Products are often returned due to a technical problem rather than due to a defect If you are experiencing a problem when using your TV try to fix the issue using this troubleshooting guide If after using this troubleshooting guide you are still experiencing an issue with your TV contact VIZIO s Support Department Quality customer support and service are integral parts of VIZIO s commitment to service excellence Phone 877 698 4946 Web www VIZIO com Fax 949 585 9563 Email techsupport vizio com Hours of operation Monday Friday 6 am to 9 pm PST Saturday Sunday 8 am to 4pm PST The TV displays No Signal e Press the INPUT button on the remote control to select a different input source e f you are using cable TV satellite or antenna connected directly to the TV scan for channels There is no power e Ensure the TV is plugged into a working electrical outlet e Ensure the power cable is securely attached to the TV e Press the Power Standby button on the remote The power is on but there is no image on the screen e Ensure all cables are securely attached to the TV e Ensure all devices are connected correctly Devices differ see your
33. device s user manual for details e Adjust Brightness Contrast or Backlight e Press the INPUT button on the remote to select a different input source 30 There is no sound e Press Volume Up on the remote control e Press the MUTE button on the remote to ensure mute is off e Check the audio settings Ensure the speakers are set to On e Ensure no headphones are connected to the TV e Check the audio connections of external devices Blu ray player game console cable satellite box that are connected to the TV e f you are using an antenna the signal strength of the channel may be low Ensure your antenna is connected securely to the TV and move the antenna around the room or close to a window for the best signal The colors on the TV don t look right e Adust the Color and Tint settings in the Picture menu e Reset the picture settings e Check all cables to ensure they are securely attached The buttons on the remote aren t working e Ensure you are only pressing one button at a time e Point the remote directly at the TV when pressing a button e Replace the remote batteries with new ones The image quality is not good e For the best image quality view high definition programs using digital sources Connect your devices with HDMI cables e f you are using an antenna the signal strength of the channel may be low Ensure your antenna is connected securely to the TV and move the antenna around the room or close t
34. eferred language Not all programs are broadcast in multiple languages The MTS feature only works when the program being viewed is being broadcast in the language you select To change the MTS language 1 Press the MENU OK button on the remote The on screen menu is displayed 2 Use the Arrow buttons to highlight oe ee Audio and press MENU OK se RN 3 Usethe Arrow buttons to highlight Analog MTS or Digital MTS and press huh MENU OK balance ass repie Speakers On Digital Audio Out Analog MTS Digit al MTS Analog MTS EXIT Resetting the Audio Settngs To reset the audio settings to the factory default settings 1 Press the MENU OK button on the remote The on screen menu is Are you sure you want to RESET Audio displayed Settings to the factory defaults 2 Use the Arrow buttons to highlight Audio and press MENU OK 3 Use the Arrow buttons to highlight Reset Audio Mode and press MENU OK 4 TheTVdisplays Are you sure you want to RESET Audio Settings to the factory defaults Use the Arrow buttons to highlight OK and press MENU OK 5 Press EXIT 23 Adjusting the Picture Settings Using the Picture menu you can adjust the following settings e Change the picture mode e Adjust noise reduction e Enable or disable Fast Response e Enable or disable the ambient light sensor e Reset the picture mode settings Changing the Picture
35. er for example cosmetic damage normal wear and tear improper operation improper voltage supply or power surges signal issues damages from shipping acts of God any type of customer misuse modifications or adjustments as well as installation and set up issues or any repairs attempted by anyone other than by a VIZIO authorized service center Products with unreadable or removed serial numbers or requiring routine 34 maintenance are not covered This one year limited warranty does not cover Products sold AS IS FACTORY RECERTIFIED or by a non authorized reseller THERE ARE NO EXPRESS WARRANTIES OTHER THAN THOSE LISTED OR DESCRIBED ABOVE ANY IMPLIED WARRANTIES INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE SHALL BE LIMITED IN DURATION TO THE PERIOD OF TIME SET FORTH ABOVE VIZIO S TOTAL LIABILITY FOR ANY AND ALL LOSSES AND DAMAGES RESULTING FROM ANY CAUSE WHATSOEVER INCLUDING VIZIO S NEGLIGENCE ALLEGED DAMAGE OR DEFECTIVE GOODS WHETHER SUCH DEFECTS ARE DISCOVERABLE OR LATENT SHALL IN NO EVENT EXCEED THE PURCHASE PRICE OF THE PRODUCT VIZIO SHALL NOT BE RESPONSIBLE FOR LOSS OF USE LOSS OF INFORMATION OR DATA COMMERCIAL LOSS LOST REVENUE OR LOST PROFITS OR OTHER INCIDENTAL OR CONSEQUENTIAL DAMAGES SOME STATES DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS OR THE EXCLUSION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES SO THE ABOVE LIMITATIONS OR EXCLUSIONS MAY NOT APP
36. er abuse or improper installations The power cord must be replaced when using different voltage than the voltage specified For more information contact your dealer Your TV is equipped with a three pronged grounded plug a plug with a third grounding pin This plug will fit only into a grounded power outlet This is a safety feature If your outlet does not accommodate the three pronged have an electrician install the correct outlet or use an adapter to ground your TV safely Do not defeat the safety purpose of the grounded plug When connected to a power outlet power is always flowing into your TV To totally disconnect power unplug the power cord The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of un isolated dangerous voltage within the inside of your TV that may be of sufficient magnitude to constitute a risk of electric shock to persons E190VA E220VA E260VA E261VA Do not overload power strips and extension cords Overloading can result in fire or electric shock The wall socket should be installed near your TV and easily accessible Only power of the marked voltage can be used for your TV Any other voltage than the specified voltage may cause fire or electric shock Do not touch the power cord during lightning To avoid electric shock avoid handling the power cord during electrical storms Unplug your TV during a lightning storm or when it
37. er with an HDMI port be sure you have an HDMI cable Connecting Your Devices Once you have determined the best available connection type on both your device and the TV ensure you have the corresponding cable To connect a device to the TV 1 Ensure both the TV and your device are off 2 Connect the device and the TV Use the best available connection See the Device Connection Chart on the next page Ensure each end of the cable is securely connected 3 Turnthe TV on by pressing the Power Standby button on the remote 4 Turn your device on 5 When you are ready to use your newly connected device press the INPUT button on the remote and select the connection type HDMI RGB etc from the on screen menu Press OK 6 Check the list of devices connection types below for special instructions Cable TV without cable box directly from wall Perform a channel scan RGB Make sure the desktop resolution on the PC is set to match your TV s resolution See Appendix A Specifications Set the Screen Mode to Normal DVD Player with DVI Connect left white and right red audio cables to the L and R ports next to the HDMI ports on the TV E190VA E220VA E260VA E261VA Select one of the connection types Use the cable s shown to connect the TV to your device Select One DIGITAL RF me DIGITAL ANALOG BETTER COMPONENT vcr r Cr ANALOG COMPOSITE AV ANALOG Device Connection
38. g is too low the picture may appear faded or washed out If the setting is too high or too low detail may be difficult to distinguish in dark or bright areas of the picture Color Adjusts the intensity of the picture colors Tint Adjusts the hue of the picture This setting is useful in adjusting the flesh tones in the picture If flesh appears too orange reduce the level of color before adjusting tint Sharpness Adjusts the edge sharpness of picture elements It can be used to sharpen non HD high definition content however it will not produce detail that does not otherwise exist Backlight Adjusts the LED brightness to affect the overall brilliance of the picture This option is not available unless Ambient Light Sensor is set to OFF Adaptive Luma Adjusts the average brightness of the picture to compensate for large areas of brightness Color Enhancement Reduces oversaturation of some colors and improves flesh tones Color Temperature Changes the warmness or coolness of the white areas of the picture DCR Dynamic Contrast Ratio Changes contrast according to displayed content for the best picture quality Reset Picture Setting Restores custom picture settings to the factory defaults E190VA E220VA E260VA E261VA Adjusting the Noise Reduction Setting Enabling or Disabling the Ambient Light Sensor Noise reduction diminishes artifacts such as blockiness or pixellation When When
39. gs 1 From the Parental Controls menu highlight RESET LOCKS and press OK The TV displays Are you sure you want to RESET ALL LOCKS SETTINGS to the factory defaults Highlight Yes and press OK 27 Viewing System Info and Resetting to Factory Defaults You can use the TV s Help menu to e Display system information e Restore the TV to its factory default settings e Restart the Setup App Displaying System Information To display a summary of the TV settings 1 Press the MENU button on the remote The on screen menu is displayed 2 Usethe Arrow buttons on the remote to highlight the Help icon and press MENU OK The Help menu is displayed VSLEM Rese 3 Highlight System Info and press MENU OK The system information is displayed 4 When you are finished reviewing the system information press the EXIT button on the remote Restoring the TV to the Factory Default Settingss All of the on screen menu settings can be reset to the factory defaults If you restore the TV to the factory default settings all changes you have made to the settings will be lost To restore the TV to its factory default settings 1 Press the MENU button on the remote The on screen menu is displayed 2 Usethe Arrow buttons on the remote to highlight the Help icon and press OK The Help menu is displayed 3 Highlight System Reset and press MENU OK 28 E190VA E220VA E260VA E261VA The TV displays Are
40. he cord and cause fire or electric shock When your TV will not be used for an extended period of time unplug the power cord To reduce risk of electric shock do not touch the connector with wet hands Insert batteries in accordance with instructions Incorrect polarities may cause the batteries to leak which can damage the remote control or injure the operator Do not expose batteries to excessive heat such as sunshine fire or the like If any of the following occurs contact the dealer The power cord fails or frays Liquid sprays or any object drops into your TV Your TV is exposed to rain or other moisture Your TV is dropped or damaged in any way he performance of your TV changes substantially This apparatus shall not be exposed to dripping or splashing and no objects fill with liquids such as vases shall be placed on the apparatus The mains plug or appliance coupler is used as the disconnect device the disconnect device shall remain readily operable CAUTION These servicing instructions are for use by qualified service personnel only To reduce the risk of electric shock do not perform any servicing other than that contained in the operating instructions unless you are qualified to do so The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated DANGEROUS VOLTAGE within the products enclosure that may be of sufficient magnitude
41. ight Date amp Time and press MENU OK English 4 Use the Arrow buttons to highlight Time Zone and press MENU OK 5 Use the Arrow buttons to highlight your time zone and press MENU OK EXIT 6 Press EXIT Set your time zone EXIT 6 13 E190VA E220VA E260VA E261VA Adjusting the Time for Daylight Savings Setting the Date and Time This setting will automatically adjust the time for zones which recognize daylight Using this menu option you can manually set the TV s date and time savings time To manually set the date and time To enable or disable the daylight savings adjustment mE 1 Press the MENU button on the remote The on screen menu is displayed 1 Press the MENU button on the remote The on screen menu is displayed 2 Use the Arrow buttons on the remote to highlight the TV icon and press 2 Usethe Arrow buttons on the remote to highlight the TV icon and press MENU OK The TV Settings menu is displayed MENU OK The TV Settings menu is displayed 3 Use the Arrow buttons to highlight Date Time and press MENU OK Use the Arrow buttons to highlight Date amp Time and press MENU OK 4 Use the Arrow buttons to highlight Current Tiime 5 Use the Arrow buttons to highlight individual numbers in the date and time 3 4 Use the Arrow buttons to highlight Daylight Saving 5 Use the Arrow buttons to change the setting to Enable or Disable Use the Number Pad to enter the current date
42. lection of the correct input faster Customizing Input Names To customize an input name 1 Press the MENU button on the remote The on screen menu is displayed 2 Use the Arrow buttons on the remote to m m nn highlight the TV icon and press MENU O OK pis 3 Use the Arrow buttons to highlight Input and press MENU OK 4 Use the Arrow buttons to highlight Input Naming and press MENU OK 5 Use the Arrow buttons on the remote to highlight the input source you wish to rename then press MENU OK 6 Use the Arrow buttons to highlight Input Naming and press MENU OK The on screen keyboard is displayed 7 Use the Arrow and MENU OK buttons to spell the custom input name S EXIT 6 When you are finished highlight 0K and press MENU OK 8 Press EXIT x Removing Unused Inputs from the Input List To remove unused inputs 1 Press the MENU button on the remote The on screen menu is displayed 2 Use the Arrow buttons on the remote to highlight the Input icon and press MENU OK IUUD www ese 3 Use the Arrow buttons to highlight Input Naming and press MENU OK 4 Use the Arrow buttons on the remote to highlight the input source you wish to remove then press MENU OK 5 Use the Arrow buttons to highlight Skip Input and press MENU OK 6 Press EXIT To restore an input to the list go to the Input Naming screen and select Reset 10 E190VA
43. ling the TV on a Wall 2 Controls and Connections ce 3 Front PAR T UU MM 3 Left Side TTE 3 Right Side Panel uu uuu 3 C i Pil sabe age ov acne tos on ee une 4 Remote CC ONERE 4 Replacing the Batteries 9 Completing the First Time Setup 6 Connecting Your Devices to the V i Before You Begin T Connecting Your Devices T Adjusting the TV Settings 9 Changing the Inp l SOurG6 _ u uuu uuu de ete 9 Customizing and Removing Input 8 65 9 Customizing Input Names 9 Removing Unused Inputs from the Input List 10 Setting Up Channels 10 Changing the Signal Source 10 Customizing the Master Channel List 11 Scanning for New or Additional Channel
44. lowing options Horiz Position Adjust the horizontal left right position of the picture Vertical Position Adjust the vertical up down position of the picture RER Fine Tune Adjust the synchronization between the PC and the TV Increase or decrease this setting if you see waviness or a blurry picture EXIT 6 If you would like the TV to automatically adjust the picture for best quality select Auto Sync and press MENU OK 15 Using the Other Menu Settings Your TV features an easy to use on screen menu Using this menu you can setting the sleep Timer e Set the sleep timer Viewa USBphete slideshow Settings When activated the TV s sleep timer will turn the TV off after a set period of time e Set the screen aspect ratio To use the sleep timer e Adjust the audio settings 1 Press the MENU button on the remote e Adjust the picture settings Timer Photo The on screen menu is displayed Wie 4 Ti 2 Use the Arrow buttons on the remote 30 minutes e Set up the parental controls Audio to highlight the Timer icon and press OK The Timer menu is displayed e Get system info or reset to factory defaults 60 minutes 3 Use the Up Down Arrow buttons on the remote to highlight the period of a time after which you want the TV to Parental Help power off 30 60 90 or 120 minutes e Setup closed captions 120 minutes 4 Press OK then press EXIT
45. n the remote to highlight the photo you would like to be displayed first then press the Play button The slideshow begins EXIT 6 To pause the slideshow press the Pause button e Togo to the previous photo press the Stop button e Toexit the slideshow press the EXIT button Customizing the Photo Display Screen The Photo menu can be displayed as a list or as a grid of thumbnail images The images can also be sorted by date or by name To customize the photo display screen 1 From the photo screen use the Arrow buttons on the remote to highlight an image then press MENU OK The menu is displayed on the left side of the screen 2 Highlight one of the following options ADS and press MENU OK Sort Select to change the display order of photos Choose Date or Name e File Select to change the method of displaying photos Choose List or Thumbnail e Thumbnail Size Select to change the size of displayed thumbnail images Choose Small Medium or Large EXIT 1f 6 E190VA E220VA E260VA E261VA setting the Screen Aspect Ratio The TV can display images in five different modes Normal Wide Zoom Panoramic Use the table below to determine the best aspect ratio for your content type and Stretch Each mode displays content according to the content s original format Areas in red will not be visible on your TV screen O O O O Normal O O
46. ntent Locks 27 FCC Class B Radio Interference Statement __ 35 Viewing System Info and Resetting to Factory Defaults 28 NOTICE 35 Displaying System Information 28 POG WaN ER 35 Restoring the TV to the Factory Default Settingss 28 SUMERET ETUR 35 Restarting the Setup App 28 Open Source Software Notice 35 Setting Up Closed Captioning 29 Changing the Appearance of Digital Closed Captions 29 Troubleshooting Technical Support 30 The TV displays No Signal 30 There is no power 30 The power is on but there is no image on the screen 30 Th re iS NO SOUNO a a rt 30 The colors on the TV don t look right 30 The buttons on the remote aren t working 30 The image quality is not good 30 The picture IS distorted u uu u u u u L di uu u et 30 The display image does not cover the entire screen 31 The TV has pixels dots that are always dark
47. o a window for the best signal The picture is distorted e Nearby electrical devices may be interfering with the TV Separate the TV from electrical appliances cars or flourescent lights e Ensure all cables are securely attached E190VA E220VA E260VA E261VA The display image does not cover the entire screen f you are in RGB mode computer ensure that H Size and V Position in the on screen menu are set correctly lf you are using TV AV1 or Component with 480i input press the WIDE button on the remote to change the screen mode The TV has pixels dots that are always dark or always lit e Your HDTV is precision manufactured using an extremely high level of technology However sometimes pixels may not display correctly These types of occurences are inherent to this type of product and do not constitute a defective product see noise or static on the screen e When your TV s digital capabilities exceed a digital broadcast signal the signal is up converted improved to match your TV s display capabilities This up converting can sometimes cause irregularities in the image e f you are using an antenna the signal strength of the channel may be low Ensure your antenna is connected securely to the TV and move the antenna around the room or close to a window for the best signal When I change input source the volume changes e he TV remembers the volume level on each input source If the
48. om children and pets Completing the First Time Setup The first time you turn on the TV the Setup App will guide you through each of the steps necessary to get your TV ready for use Before you begin the first time setup e Your TV should be installed and the power cord should be connected to an electrical outlet e Have your remote ready Ensure the batteries are inserted e Your devices should be connected To complete the first time setup 1 Turn the TV on by pressing the Power Standby button on the remote Initial Setup Welcome Allow the VIZIO setup Wizard to help you tune your channels The Setup App is displayed Press the Right Arrow button on the remote to go to the next screen EXIT Exit 2 Use the Up Down Arrow buttons on the remote to highlight your preferred language then press Right Arrow Initial Setup Language Please select your language mE Espanot Francais WA Select EXIT Exit 3 Usethe Up Down Arrow buttons on the remote to highlight Home and press Right Arrow Initial Setup Mode Setting Please select your input location WA Select EXIT Exit 4 Ja If the TV is connected to an external antenna select Antenna then press Right Arrow and go to step 5 If the TV is connected to a cable service without a set top box cable is connected directly from the wall outlet select Cable then press Right Arrow and go to step 5 If the TV is connected
49. on Fast Respon 5E Uff 3 Usethe Arrow buttons to highlight Fast Response 4 Use the Left Right Arrow buttons to change the setting to Off or On 5 Press EXIT 25 Resetting the Picture Settings To restore the TV s picture settings to the factory defaults 1 Press the MENU OK button on the remote The on screen menu is Are you sure you want to RESET Piture Mode to the factory defaults displayed ance 2 Use the Arrow buttons to highlight Picture and press MENU OK 3 Use the Arrow buttons to highlight Reset Picture Mode then press MENU OK 4 Use the Arrow buttons to highlight OK and press MENU OK 5 Press EXIT 26 E190VA E220VA E260VA E261VA Setting the Parental Controls The TV s parental controls allow you to prevent the TV from displaying certain channels or programs without a password To access the Parental Control menu 1 Press the MENU button on the remote The on screen menu is displayed 2 Use the Arrow buttons on the remote to highlight the Parental icon and press MENU OK 3 Enter your parental passcode If you have not set a custom passcode the default is 0000 The Parental Control menu is displayed Enabling or Disabling Program Ratings To manage program content according to its rating you must enable the Program Rating feature To enable or disable the Program Rating feature 1 From the Parental Controls menu highlight Rating Enable and p
50. or always lit 31 see noise or static on the screen 31 When change input source the volume changes 31 When change input source the display image changes size 31 CC IG Il 32 Limited Warranty RTT 34 ON PARTS AND LABOR 34 Parts and IZA OF uu uuu uuu uuu lu td en du 34 DOS OP u uuu ME 34 Hmitations and EXCIUSIONS uuu uuu uuu u luu u lu oT 34 Personal vds Pa CUIRE RUE 34 Zero Bright Pixel Defect Guarantee 34 Installing the TV Inspecting the Package Contents Installing the TV Before installing your new TV take a moment to inspect the package contents After removing the TV from the box and inspecting the package contents you can Use the images below to ensure nothing is missing or damaged begin installing the TV Your TV can be installed in two ways When you have completed your inspection install the TV e On a flat surface using the included stand e Ona wall using a VESA standard wall mount not included Installing the TV Stand Your TV includes a stand designed to support the weight of the TV and keep it from falling over However the TV can still fall over if tis placed on an uneven unstable or non level surface tis pushed pulled or otherwise improperly moved
51. ress OK The Rating Enable menu is displayed 2 Select On or Off and press OK Locking and Unlocking Channels When a channel is locked it will be inaccessible Locking a channel is a good way to prevent children from viewing inappropriate material To lock or unlock a channel 1 From the Parental Controls menu highlight Channel Locks and press OK The Channel Locks menu is displayed 2 Highlight the channel you want to lock or unlock and press OK 3 When a channel is locked the Lock icon appears locked The channel is not accessible unless the parental passcode is entered 4 Whena channel is unlocked the Lock icon appears unlocked The channel is accessible E190VA E220VA E260VA E261VA Blocking and Unblocking Content by Rating A channel may sometimes broadcast programs that are meant for children and at other times broadcast programs that are meant for mature audiences You may not want to block the channel completely using a channel lock but you may wish to block certain programs from being viewed When this is the case you can use the TV s Rating Block feature to block content based on its rating AR X E Os For a list of content ratings and their definitions visit www tvguidelines org To block or unblock content by its rating 1 Fromthe Parental Controls menu highlight the content type you want to adjust and press OK USA TV USA television program broadcasts USA Movie
52. ruVolume E260VA 26 Class 26 01 25 35 x 17 00 x 5 86 25 35 x 17 00 x 2 30 13 1 Ibs 11 8 Ibs Edge Lit LED 60 Hz 1366 x 768 20 000 1 8 ms 350 nits 2 1 4 4 English Spanish French Optical Digital Audio Out 3 5mm 2 5W SRS TruSurround HD SRS TruVolume E261VA 26 Class 26 00 25 35 x 17 00 x 5 86 25 35 x 17 00 x 2 30 13 1 Ibs 11 8 Ibs Edge Lit LED 60 Hz 1366 x 768 20 000 1 o ms 350 nits 2 1 4 4 English Spanish French Optical Digital Audio Out 3 5mm 2 SW SRS TruSurround HD SRS TruVolume Ambient Light Sensor Power Consumption Voltage Range E190VA Yes 22W 100 240 VAC 50 60Hz E220VA Yes 26W 100 240 VAC 50 60Hz E260VA Yes 40W 100 240 VAC 50 60Hz E261VA Yes 40W 100 132 VAC 33 Limited Warranty ON PARTS AND LABOR Covers units purchased as new in United States and Puerto Rico Only VIZIO provides a warranty to the original purchaser of a new Product against defects in materials and workmanship for a period of one 1 year of non commercial usage and ninety 90 days of commercial use If a Product covered by this warranty is determined to be defective within the warranty period VIZIO will either repair or replace the Product at its sole option and discretion To obtain warranty service contact VIZIO Technical Support via e mail TechSupport VIZlO com or via phone at 877 MY VIZIO 877 698 4946 from 6 00AM
53. s 11 Scanning for Channels ossessi UT UM 12 Customizing Channel Names 12 Changing the On Screen Menu Language RL 13 Setting the TV s Date and Time nennen 13 Setting the Time Zone 13 Adjusting the Time for Daylight Savings 14 Enabling or Disabling Automatic Date and Time Updates 14 Setting the Date and Time 14 Adjusting the TV Settings for Use with A PC 15 Using the Other Menu Settings 16 Navigating the On Screen Menu 16 Setting the Sleep Timer 16 Viewing a USB Photo Slideshow 16 Customizing the Photo Display 17 Setting the Screen Aspect Ratio 18 Adjusting the Audio Settings 19 Enabling or Disabling SRS TruSurroundHD 19 Enabling or Disabling SRS TruVolume
54. tly normalizes volume fluctuations due to television Your TV features six preset equalizer settings These settings allow you to commercials or channel changes customize your TV s sound to match the type of programming you most often enjoy To enable or disable SRS TruVolume 1 Press the MENU OK button on the remote The on screen menu is viccic displayed A The Equalizer Settings menu is not available when SRS TruSurroundHD is enabled M To adjust the equalizer settings 2 Usethe Arrow buttons to highlight Audio and press MENU OK 1 Press the MENU OK button on Equalizer Settings the remote The on screen menu is X 3 Si ME to highlight mE displayed p ante 3 Ht 2 Use the Arrow buttons to highlight 4 Press the Right Left Arrow buttons to aaa asas Audio and press MENU OK select On or Off and press EXIT pram SS so wa 3 Use the Arrow buttons to highlight Equalizer Settings and press Menu Analog MTS 0 Digital MTS OK 4 Use the Arrow buttons to highlight Turn SRS TruVolume On or Off one of the following settings and press Menu OK e Classical e Disco EXIT 6 Flat Jazz e Pop Rock EXIT gt 5 Press EXIT 20 E190VA E220VA E260VA E261VA Adjusting Bass and Treble Levels Adjusting the Speaker Balance The bass and treble levels for your TV s built in speakers can be adjusted to your The built in speakers c
55. to a cable or satellite set top box press the EXIT button on the remote then select the input to which your set top box is connected HDMI COMP or AV Use the Up Down Arrow buttons on the remote to highlight Scan then press Right Arrow The TV begins a channel scan Wait for the channel scan to finish When the channel scan is complete the Congratulations screen is displayed Initial Setup Please select your input source WA Select EXIT Exit Channel Scan waq Initial Setup Please connect your cable or antenna to the DTV TV input lt Back WA Select EXIT Exit Initial Setup Channel Scan Channel Scan will take a few minutes to complete Status Scanning Analog Channels 0 Digital Channels 4 EXIT Exit Initial Setup Complete Congratulations Initial Setup completed The first time setup is complete Connecting Your Devices to the TV Your HDTV can be easily connected to an external device e DVD or Blu Ray player e Video game console e Cable box e External antenna Or other device Before You Begin To connect a device to the HDTV 1 Verify that the device has one of the following types of video ports available 6 Component RF Antenna O Composite AV Required Device Ports 2 Ensure the TV has a matching port available 3 Ensure you have a cable that matches the available port For example if you are connecting a Blu ray play
56. will not be used for long period of time This will protect your TV from damage due to power surges Do not attempt to repair or service your TV yourself Opening or removing the back cover may expose you to high voltages electric shock and other hazards If repair is required contact your dealer and refer all servicing to qualified service personnel WARNING Keep your TV away from moisture Do not expose your TV to rain or moisture If water penetrates into your TV unplug the power cord and contact your dealer Continuous use in this case may result in fire or electric shock Do not use your TV if any abnormality occurs If any smoke or odor becomes apparent unplug the power cord and contact your dealer immediately Do not try to repair your TV yourself Avoid using dropped or damaged appliances If your TV is dropped and the housing is damaged the internal components may function abnormally Unplug the power cord immediately and contact your dealer for repair Continued use of your TV may cause fire or electric shock Do not install your TV in an area with heavy dust or high humidity Operating your TV in environments with heavy dust or high humidity may cause fire or electric shock Follow instructions for moving your TV Ensure that the power cord and any other cables are unplugged before moving your TV When unplugging your TV hold the AC DC power adapter not the cord Pulling on the power cord may damage the wires inside t
57. y a different input Change the input device Press the button that corresponds to the input device you wish to view Turn the TV on or off Activate the sleep timer With each press of the button the sleep timer s duration will change Change the displayed aspect ratio Activate or deactivate closed captioning Press repeatedly to change the caption channel CC1 CC2 etc Close the on screen menu Navigate the on screen menu and episode guide Display the on screen menu or select highlighted menu option Increase or decrease the loudness of the TV s audio Change the channel With each press of the button the channel will increase or decrease by one Turn the sound off or on When mute is activated the TV s audio is turned off Return to the channel last viewed Use the number pad to manually enter a channel Display the Info Window Use to manually enter a sub channel 18 1 18 2 etc Replacing the Batteries 2 Remove the battery cover Insert two AA batteries into the remote control Make sure that the and symbols on the batteries match the and symbols inside the battery compartment Replace the battery cover e Use only good quality batteries e Inserting the batteries incorrectly may result in cracking or leakage that may cause a fire or result in injury e Dispose of old or dead batteries in accordance with local hazardous waste regulations e Keep batteries away fr
58. you sure you would like to Restore Defaults This will erase any custom settings 4 Highlight Yes and press MENU OK 5 Press EXIT Restarting the Setup App The TV s Setup App can be used to easily set up the TV tuner To access the Setup App 1 Press the MENU button on the remote The on screen menu is displayed Are you sure you want to RESET SETUP WIZARD 2 Use the Arrow buttons on the remote to highlight the Help icon and press MENU OK The Help menu is displayed Cancel 3 Highlight Start Setup Wizard and press MENU OK 4 Use the Number Pad to enter your parental PIN If you have not yet set your PIN enter 0000 5 The TV displays Are you sure you want to RESET SETUP WIZARD Highlight OK and press MENU OK E190VA E220VA E260VA E261VA setting Up Closed Captioning Your TV can display closed captions for programs that include them Closed captions display a transcription of a program s dialogue If the program you are viewing is not being broadcast with closed captions the TV will not display them To activate or deactivate closed captions 1 Press the MENU button on the remote The on screen menu is displayed vicio 4 ree mas 2 Use the Arrow buttons on the remote to highlight the CC icon and press OK Digital Closed Cap The Closed Caption menu is displayed 3 Use the Arrow buttons on the remote to highlight the type of closed captions you wish
Download Pdf Manuals
Related Search