Home

TruVision DVR 44HD User Manual

1. Control Panel D Exit Name 1 Camera 2 Video Search 3 Digital Zoom 4 Show Text Overlay 5 Skip Time 6 Control Panel 7 Exit 24 hour playback Search result playback Video Search Digital Zoom Show Text Overlay Skip Time Control Panel Exit Description Select a camera for playback Return to the Search window Enter the digital zoom function for the selected camera See Digital zoom in playback on page 41 for more information Hide or display text overlay This option is only available via the browser See Text overlay on page 130 for more information Modify the playback skip time See Playback speed and skip time on page 40 for more information Hide or display the playback control toolbar Return to live view or video search Instant playback Use the live view toolbar to perform instant replay of a predefined period default time is five minutes This can be useful to review an event that has just happened Only one camera at a time can be selected 38 TruVision DVR 44HD User Manual 5BChapter 6 Playback functionality You can modify the playback period in the Instant Replay Duration menu See page 88 for further information To instantly replay recorded video 1 In live view mode left click the mouse on the desired camera image The live view toolbar appears Click the Instant Playback icon gt Click the Channel icon bed and select the desired ca
2. Figure 9 Digital zoom window To quickly zoom in out on a camera image 1 2 3 Left click the mouse on the desired camera The live view toolbar appears Click the digital zoom icon The digital view window appears Left click the mouse and drag the red square to the area of interest or press the arrow buttons on the front panel to position the red square The selected area is magnified To exit digital zoom right click the mouse PTZ preset and tours When in live view you can quickly call up the list of existing presets preset tours and shadow tours by using the front panel remote control mouse and keypad 32 TruVision DVR 44HD User Manual 4BChapter 5 Live view Front panel Press Enter PTZ control panel appears Mouse Left click the mouse on the desired camera image The live view toolbar appears Click the PTZ control icon a to enter PTZ mode The PTZ control panel appears Remote control Press the OK button The PTZ control panel appears Keypad Press the Enter button on the keypad For further information on using the KTD 405 keypad see Appendix E KTD 405 keypad on page 141 If the display was in multiview format it changes to full screen format for the selected camera See Figure 10 below for a description of the PTZ control panel Figure 10 PTZ control panel Table 10 Description of the PTZ control panel Name 1 Directional pad auto scan buttons 2 Zoom focus and iris 3 P
3. Lets you do the following in live view Switch between mainstream and substream Start stop all streaming from selected cameras Start recording from selected cameras Digital Zoom 75558 Turn POS ATM text insertion on off 123 17BChapter 18 Using the web browser Name Description Take a video snapshot View previous and next camera respectively If viewing in multiview format live view moves to the next group of cameras for the selected number of video tiles Turn audio on off Turn microphone on off Baoan 6 PTZ panel Hide display the PTZ panel Control a PTZ dome camera via the web browser The web browser interface lets you control the PTZ functions of a dome camera Click a PTZ dome camera and use the PTZ controls on the interface to control the PTZ functions Figure 33 PTZ controls PTZ 1 Directional pad auto scan buttons Controls the movements and directions of the PTZ Center button is D used to start auto pan by the PTZ dome camera 2 Adjust speed of PTZ dome camera D 3 Adjust zoom focus and iris 4 Turn on or off the camera light if available on the camera 5 Lens initialization Initialize the lens of a camera with a motorized lens such as PTZ or IP cameras This function helps to maintain lens focus accuracy over prolong periods of time Start or stop camera wiper if available on the camera Auxiliary focus Automatically focus the camera lens for the sharpest picture
4. SONY EVI D30 31 SONY EVI D70 N N N N SONY EVI D100 P TECHWIN Y Y N N VICON Y Y N N YOULI Y Y N N Aux 2 Aux 1 TruVision DVR 44HD User Manual Wiper Zoom area Ze Z a Z RN SE ee Z ZIZI ZIZI zZ ae ee Center ZI Z Z Z Z lt ZI ae ae ae Z ZIZI ZIZ zZ ee ae Auto Zoom Zoom Focus Focus pan N Y Y Y Y N Y Y Y Y Menu Preset Tour Shadow tour N Y N Y N Y N Y N Y N Y N Y N Y Y Y Y Y N N N N N Y N Y N Y N Y N Y Y Y N N N N N Y N Y N Y Y Y N Y Y Y N N N N N N N N N Y Y Y N Y N Y N Y N Y N N N N N N N N N N N N N Y N N N N N N N Y N N 153 Appendix H Default menu settings Display Settings Display General Monitor Video Format NTSC PAL Auto detect at booting Picture Setting Standard BNC Output Brightness Null Resolution Null Display Status Icons Yes Time Bar Transparent Null Enable Timebar Yes Video Output Interface VGA HDMI Default View 1 1 for 8 ch models and 4 4 16 ch models Sequence Dwell Time No switch Enable Audio Output No Event Monitor VGA HDMI Event Full Screen Monitoring Dwell Time 10 Alarm Full Screen Monitoring Dwell Time 10 Layout Video Output Interface VGA HDMI Camera Setup Analog Camera Overview Analog Camera Number Null Camera Name Null Status Null Live View Null IP Camera Status 154 TruVision DVR 44HD User Manual IP Camera Camera Recording Setting
5. There are three types of privilege settings Local Configuration Remote Configuration and Camera Configuration Note Only the administrator can restore factory default settings Local configuration settings By default only the local information log management setting is enabled for both operators and guests e Local Information Log Management Search and view logs of the recorder and view system information e Local Parameter Settings Configure parameters and import the configuration from the recorder e Local Camera Management Locally add delete and edit IP cameras e Local Advanced Operation Access HDD management including the initialization and modification of disk properties Update system firmware as well as stop the I O alarm output e Local Shutdown Reboot Shutdown or reboot the recorder 112 TruVision DVR 44HD User Manual 15BChapter 16 User management Remote configuration settings By default only remote log search and two way audio are enabled for operators and only the remote log search is enabled for guests e Remote Log Search Remotely view logs that are saved on the recorder e Remote Parameter Settings Remotely configure parameters and import configuration e Remote Camera Management Remotely enable and disable channels e Remote Video Output Control For future use e Two Way Audio Use two way audio between the remote client and the recorder e Remote Alarm Control Remotely alert
6. Use to select options in a menu and to control playback Press for Enter Live view mode Press Enter to enter exit PTZ mode Press the left right arrow buttons to scroll between the cameras Menu mode To enter the menu toolbar keep pressing the left arrow button until the first menu icon is selected Then press the left right arrow buttons to select a menu icon To select a menu option in the submenu panel or setup menu press the arrow buttons left right and up down to position cursor in the menu window Press for Enter See Figure 12 on page 24 Playback mode Press the left right arrow buttons to slow down or speed up playback Press the up down arrow buttons to jump forwards or backwards by 30 seconds Press Enter to stop start playback PTZ mode Press the arrow buttons to control the movement of the PTZ dome camera Press once to enter quick archive mode Press twice to start archiving If the USB stick has an LED it will flash during archiving Switch between different cameras in live view PTZ control or playback modes Use the soft keyboard to enter numerals 0 to 9 There are two USB ports Use the USB ports to archive video upgrade firmware use a USB mouse or connect a USB CD DVD burner 3BChapter 4 Operating instructions 11 Name Status LEDs Description HDD A steady GREEN light indicates that the recorder is accessing the HDD in read or write operation A steady RED light indicates HDD failure Net
7. 60 Hz resolution in VGA HDMI The monitor resolution should be at least 800 x 600 Adjust your monitor accordingly to this resolution Rack mounting The recorder is 1 5U and is rack mountable using the rack mount ears delivered with the product See Figure 6 below Figure 2 Rack mount installation To install the racks 1 Attach the two small front rack mount ears A to the recorder Supplied 2 Attach the recorder to the front rails B Screws not supplied TruVision DVR 44HD User Manual Chapter 3 Getting started Power on the recorder Before starting the recorder connect at least one monitor Otherwise you will not be able to see the user interface and operate the device The recorder auto detects the video mode PAL or NTSC on startup lt comes equipped with a universal power supply that will auto sense 110 240 V 60 50 Hz Note It is recommended that an uninterruptible power supply UPS is used in conjunction with the device To turn on the recorder Turn on the recorder using the power switch on the back panel Once it is powered up the status LEDs on the front panel will light up To turn off the recorder 1 In live view mode right click the mouse and click Menu The main menu window appears 2 From the menu toolbar click Shutdown 3 Inthe Shutdown popup menu select Shutdown Click Yes to confirm shutdown You will be requested to enter the Admin password To reboot the recorder 1 I
8. Temperature Consider the unit s operating temperature 10 to 55 C 14 to 131 F and noncondensing humidity specifications 10 to 90 before choosing an installation location Extremes of heat or cold beyond the specified operating temperature limits may reduce the life expectancy of the recorder Do not install the unit on top of other hot equipment Leave 44 mm 1 75 in of space between rack mounted DVR units Moisture Do not use the unit near water Moisture can damage the internal components To reduce the risk of fire or electric shock do not expose this unit to rain or moisture Chassis Equipment weighing less than 15 9 kg 35 Ib may be placed on top of the unit Unpacking the recorder and its accessories When you receive the product check the package and contents for damage and verify that all items are included There is an item list included in the package If any of the items are damaged or missing please contact your local supplier ltems shipped with the product include 8 TruVision DVR 44HD User Manual 1BChapter 2 Physical installation e IR infrared remote control e Two AAA batteries for the remote control e AC power cords e USB mouse e Recorder e CD with software and manuals e TruVision DVR 44HD Quick Start Guide e TruVision DVR 44HD User Manual on CD e TruVision Recorder Operator Guide on CD Back panel The figures below show the back panel connections and describe each conne
9. or each individual alarm output Note This option is only supported by cameras that support alarm output 11 Click Apply to save changes 12 Click Exit to return to live view Intrusion detection You can set up an area in the surveillance scene to detect when intrusion occurs If someone enters the area a set of alarm actions can be triggered 66 TruVision DVR 44HD User Manual 9BChapter 10 Camera setup Figure 22 Intrusion detection window Analog Camera Over IP Camera Status Analog 8 Intrusion Detection Camera Recording Enable Snapshots Settings amp Camera OSD intrusion Region Intrusion Region1 Image Sensitivity Motion Detection Percentage Time Threshold s Privacy Mask Camera Tamper Restricted Access C PTZ Setup PTZ Presets Tours ben nmn ee Poe Restore Camera Setup To define line crossing detection 1 2 3 4 on 10 11 From the menu toolbar click Camera Setup gt VCA SMD gt VCA Select the camera to detect line crossing motion Each camera must be set up individually Under Type select Intrusion Detection and check Enable Under Intrusion Region select the desired region number You can create up to four different regions for a camera Set the sensitivity level between 1 and 100 Default is 50 Set the percentage level between 1 and 100 Default is 1 Set the time threshold level between 1 and 10 Default is 0 Note Click Restore to r
10. 2 Check Enable V stream Encoding 3 Select the desired settings for frame rate and maximum bit rate Kbps 4 Click Apply to save the settings and Exit to return to live view To configure V streaming The V stream shows video on the recorder s BNC output 1 Click the Display Settings gt Display gt Video Output Interface and select Main BNC 2 Under Default View select the desired view format 3 Under Sequence Dwell Time select the desired camera sequence mode Note Sequencing can only be done in single view display mode 4 Click the Display Settings gt Layout gt Video Output Interface and select Main BNC 5 Select the desired sequence order of the cameras 6 Click Apply to save the settings and Exit to return to live view TruVision DVR 44HD User Manual 15 Chapter 11 Network settings The Network settings menu allows you to manage all network related aspects of the recorder including general network settings DDNS NTP synchronization email setup and FTP server setup Additionally the Net Detect and Network statistics menus provide you with a useful and efficient tool to analyze the behavior of the recorder on the network You must correctly configure your recorder s network settings before using it over the networking order to e Connect IP cameras to it e Connect to the recorder over the LAN e Connect to the recorder over the internet Network settings Note As every network configuration may dif
11. 8 Start selected preset tour shadow tour depending on function selected 9 List presets available 10 List preset tours available 11 List shadow tours available 12 Modify brightness contrast saturation and hue values Play back recorded video To search and play back recorded video click Playback on the menu bar to display the Playback page shown in Figure 34 on page 125 124 TruVision DVR 44HD User Manual 17BChapter 18 Using the web browser Figure 34 Browser playback page StruVision TVR 44HD au E u Wav 12 54 29 L0 t 201 N simp y gt r aa n a adae eww ys aq qdadqd dd e1edeae Description 1 Selected camera Calendar Selected day is highlighted Search Click to start searching recorded files for the selected camera Display format Click to change the display format in the viewer single view or multiview display oye ef Timeline The timeline moves left oldest video to right newest video Click a location on the timeline to move the cursor to where you want playback to start 6 Playback control toolbar Reverse Click to reverse playback Start stop Start or stop playback Stop playback Timeline jumps back to 00 00 00 time midnight of the previous day Speed down Click to scroll through the different speeds available single frame 1 8 speed 1 4 speed 2 speed normal X2 speed X4 speed X8 speed maximum speed Current speed is displayed
12. Holiday 6 Password Required e Configuration Files Enable Wizard Start Wizard Now 7 Menu Timeout Mouse Pointer Speed Enable Front Panel Lock Text Insertion RS 232 Settings Apply Storage Management Table 15 Description of the Monitor setup window General settings Option Description 1 Language Define the language of the system Select the desired language from the drop down list and click Apply The language displayed changes immediately Default is English 2 Device Name Define the recorder name The default name is TVR 44HD Click the edit box and enter the new name from the soft keyboard 3 Remote Control ID The device number to use for the recorder when linking the device to a remote control The default value is 255 4 Keypad Zone ID Each recorder in a daisy chain must have a unique zone ID so that it can be controlled by a RS 485 wired keypad This is not required when using IP keypads The default value is 1 5 Password Required Define whether a login password is required to open the menu Check the box to enable disable and click Apply Default is Disable 6 Enable Wizard Immediately start the wizard without rebooting the system Check the box to enable disable and click Apply Default is Enable Note For enhanced security it is recommended to disable 98 TruVision DVR 44HD User Manual 13BChapter 14 Device management Option Description 7 Menu Timeout Define the time in minutes
13. members dyndns org Domain mycompanydvr dyndns org User name myname Password mypassword Or NO IP Enter server address for example dynupdate no ip com In the host name field enter the host obtained from the NO IP web site Then enter the user name and password that are registered with the No IP network 4 Ask your ISP service provider for your DNS server address or look it up in the browser interface settings of your router Go to Network Settings and enter the preferred and alternate DNS server addresses as well as the default gateway address 5 Click Apply to save the settings and click Exit to return to live view NTP server settings A Network Time Protocol NTP server can also be configured on your recorder to keep the date and time current and accurate Note If the device is connected to a public network you should use a NTP server that has a time synchronization function such as the server at the National Time Center IP Address 210 72 145 44 or europe ntp pool org If the device is setup in a more customized network NTP software can be used to establish a NTP server used for time synchronization To set up an NTP server From the menu toolbar click Network Settings gt NTP N Check the NTP box to enable feature It is disabled by default 9 Enter the NTP settings e Interval min Time in minutes to synchronize with the NTP server The value can be between 1 and 10080 minutes Default
14. on page 82 for more information Define a multicast IP as well as the server HTTP and RTSP ports See page 76 Check the bandwidth being used by remote live view and playback See Network statistics on page 85 for more information Define the recording schedules See Recording schedule on page 86 for more information Define which cameras can manually record See Manual recording on page 89 for more information Define the alarm input parameters for when an external alarm is triggered See Set up alarm inputs on page 90 for more information Define the response when an external alarm is triggered See Manual trigger on page 92 for more information Define the manually trigger outputs of the recorder See Manual trigger on page 92 for further information Define the warning buzzer time See Buzzer on page 92 for more information Define the notification parameters when irregular events occur such as a HDD is full See Alarm notification types on page 93 for more information Define the video loss detection settings See Detect video loss on page 94 for more information Define the remote alarm host See Remote alarm host setup on page 95 for more information Define time and date See Time and date on page 96 for more information Define the general settings of the recorder such as language device name enable the wizard menu timeout and enable front
15. panel lock See General recorder settings on page 98 for more information Import export configuration settings restore default factory settings and restart the recorder See Configuration files on page 99 for 129 17BChapter 18 Using the web browser Menu Storage Management User Management System Information Function Upgrade Firmware Holiday Text Insertion RS 232 Settings HDD Information Storage Mode S M A R T Settings Users Device Info Camera Record Alarm Input Alarm Output Network Text overlay Description more information Upgrade the recorder firmware See Upgrade system firmware on page 100 for more information Define how recordings occur during holiday periods See Holiday schedules on page 100 for more information Define access device access mode and start string See Text insertion on page 101 for more information Define the RS 232 parameters See Configure the RS 232 port on page 101 for more information Define the HDD basic settings and initialize the HDD See HDD information on page 103 and Initialize a HDD on page 103 for more information Define the storage mode of the HDD See Managing eSATA on page 104 and Group HDDs on page 105 for more information List the S M A R T information on the HDD See S M A R T settings on page 106 for more information Define modify and delete use
16. 01 35 19 April 1st Sun Octobe last Sun 60 Minutes Previous Cancel Note The system time and date are visible on screen However they do not appear in recordings Click Apply and then Next to move to the next page or click Previous to return to the previous page Network configuration Configure your network settings such as the NIC type IP address subnet mask and default gateway Enter the preferred DNS server address as well as the alternate one to use NIC Type 10M 100M Self adaptive Enable DHCP E lPv4 Address 192 168 1 82 IPv4 Subnet Mask 255 255 255 0 IPv4 Default Gateway 192 168 1 1 Preferred DNS Server Alternate DNS Server Previous PXI Cancel Click Next to move to the next page or Previous to return to the previous page TruVision DVR 44HD User Manual 2BChapter 3 Getting started 7 HDD management The hard drives are initialized at the factory However if you wish to clear all data click Initialize to initialize the HDD and Next to move to the next page or Previous to return to the previous page BL Capacity Status Property Type Free Space i 1 863 GB Normal RAW Local 1 862 GB Initialize Previous Cancel 8 Recording configuration Configure your recording settings as required The settings apply to all cameras connected to the recorder Global recording Constant recording TL Hi TL Lo E Event Motion Alarm Previous Cancel Chec
17. 1 Click the PTZ Control icon on the live view toolbar Or From the menu toolbar click Camera Setup gt PTZ Setup 2 Select the camera baud rate data bit stop bit parity flow control PTZ protocol and address for the camera See Appendix H Default menu settings on page 154 for the default values Note It is important to ensure that the settings correspond with those used in the PTZ camera 3 Click Copy to copy the settings to another camera if required and select the cameras 4 Click Apply to save the settings and then click Exit to return to live view PTZ presets and tours Presets are previously defined locations of an analog PTZ dome camera It allows you to quickly move the PTZ dome camera to a desired position They are configured and modified from the Camera Setup gt PTZ Presets Tours window see Figure 24 below Tours are series of presets Shadow tours allow you to record the manual movement of a PTZ and follow the same tour at a later date Note The PTZ dome camera used must be able to support a preset command See Appendix G Supported PTZ commands on page 152 for the complete list of PTZ commands available by camera protocol TruVision DVR 44HD User Manual 71 9BChapter 10 Camera setup Figure 24 PTZ configuration window Table 13 Description of the PTZ configuration window Name Description 1 Save preset Saves preset 2 Call preset Calls up pre existing preset 3 Shado
18. 44 76 108 140 172 204 236 268 300 332 364 396 428 460 492 14 13 45 77 109 141 173 205 237 269 301 333 365 397 429 461 493 15 14 46 78 110 142 174 206 238 270 302 334 366 398 430 462 494 16 15 447 79 111 143 175 207 239 271 303 335 367 399 431 463 495 17 16 48 80 112 144 176 208 240 272 304 336 368 400 432 464 496 18 17 49 81 113 145 177 209 241 273 305 337 369 401 433 465 497 19 18 50 82 114 146 178 210 242 274 306 338 3 70 402 434 466 498 20 19 51 83 115 147 179 211 243 275 307 339 371 403 435 467 499 21 20 52 84 116 148 180 212 244 276 308 340 372 404 436 468 500 22 21 53 85 117 149 181 213 245 277 309 341 373 405 437 469 501 23 22 54 86 118 150 182 214 246 278 310 342 374 406 438 470 502 TruVision DVR 44HD User Manual 147 KTD 405 keypad Camera Zone ID of the recorder npu 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 416 24 23 55 8 7 119 151 183 215 247 279 311 343 375 407 439 471 503 25 24 56 88 120 152 184 216 248 280 312 344 3 76 408 440 472 504 26 25 57 89 121 153 185 217 249 281 313 345 37 77 409 441 473 505 27 26 58 90 122 154 186 218 250 282 314 346 378 410 442 474 506 28 2f 59 91 123 155 187 219 251 283 315 347 379 411 443 475 507 29 28 60 92 124 156 188 220 252 284 316 348 380 412 444 476 508 30 29 6l 93 125 157 189 221 253 285 317 349 381 413 445 477 509 31 30 62 94 126 158 190 222 254 286 318 350 382 414 446 478 510 32 31 63 95 127 159 191 223 255 287 319 351 383 415 447 479 9511 Connecting a KTD 405 keypad and dome camera to the
19. Check the Attach JPEG File box if you want to send an email with attached alarm images Select an interval range in the Interval box The interval range represents the time range in between the alarm images being sent For example if you set the interval range at two seconds the second alarm image will be sent two seconds after the first alarm image Click Test to the test email settings Note We recommend that you test the email settings after entering values in the email window Click Apply to save the settings and click Exit to return to live view Note We recommend that you test the email settings after entering values in the Email window TruVision DVR 44HD User Manual 81 10BChapter 11 Network settings Configure an FTP server to store snapshots You can upload your snapshots to an FTP server for storage Note It is not possible to stream video to an FTP site To configure the FTP server settings 1 From the menu toolbar click Network Settings gt FTP 2 Check the Enable FTP box 3 Enter the FTP server information 4 Select the directory to use root parent or secondary If Parent or Secondary were selected select the desired options for them 5 Click Apply to save the settings and click Exit to return to live view SNMP settings SNMP is a protocol for managing devices on networks When you enable SNMP in the menu network management systems can retrieve recorder status information from the
20. HTTP Port 80 RTSP Server Port 554 Total Bandwidth Limit Kbps 61440 Enable PPPoE Disable User Name Null Password Null Confirm Null DDNS Disable DDNS Type ezDDNS Server Address www tvr ddns net Host Name Null Enable NTP Disable Interval min 60 NTP Server time nist gov NTP Port 123 Enable Server Authentication No User Name Null Password Null SMTP Server Null SMTP Port 25 Enable SSL No Sender Null Sender s Email Address Null Select Receiver Receiver 1 Receiver Name Null Receivers Address Null Include Snapshot Disable Interval Disable TruVision DVR 44HD User Manual FTP FTP SNMP SNMP UPnP UPnP Net Detect Traffic Network Statistics TruVision DVR 44HD User Manual Network Stat 25BAppendix H Default menu settings Enable FTP Disable FTP Server Null FTP Port 21 User Name Null Password Null Directory Use root directory Parent Directory Null Secondary Directory Null Enable SNMP Disable SNMP Version SNMP Port 161 Read Community public Write Community private Trap Address Null Trap Port 162 Enable UPnP Disable Mapped Type Auto Port Type HTTP Port RTSP Port Server Port Name LAN1 Network Delay Packet Loss Test Select NIC Destination Address Network Packet Archive Device Name LAN1 192 168 1 82 Type Bandwidth IP Camera Null Remote Live View Obps Remote Playback Obps
21. IP address dynamically to a device each time it connects to a network Check this box if you have a DHCP server running and want your recorder to automatically obtain an IP address and other network settings from that server The DHCP server is typically available in your router Default value is Disable Enter the IP address for the recorder Default value is 192 168 1 82 Enter the subnet mask for your network so the recorder will be recognized within the network Default value is 255 255 255 0 Enter the IP address of your network gateway so the recorder will be recognized within the network This is typically the IP address of your router Consult your router user manual or contact your ISP to get the required information on your gateway Default value is 192 168 1 1 Displays the MAC address The MAC address is a unique identifier of your recorder and it can not be changed Enter the preferred domain name server to use with the recorder It must match the DNS server information of your router Check your router s browser interface or contact your ISP for the information Use the server port for remote client software access The port range is between 1024 and 65535 Enter the server port value The default value is 8000 77 10BChapter 11 Network settings Option 9 Multicast IP 10 Enable Telnet 14 15 IPv6 Address 1 IPv6 Address 2 IPv6 Default Gateway MTU bytes Alternate DNS Server HTTP
22. O OSD settings 61 P Password change admin password 114 change user password 114 enable disable login password 98 Playback 24 hour playback 39 bookmarks 42 change playback speed 41 instant playback 38 playing back archived files 52 pop up menu description 38 search by event 46 search by time 45 search by video type 45 search results 44 skip time 40 snapshots 47 using the web browser 124 Playback control panel description 36 Playback control toolbar quick access 38 Player using for playback 52 Power up and down recorder 12 PPPoE settings 78 Preset tour calling up 34 Preset tours setting up 73 Presets calling up 73 quick access 33 selecting setting up and deleting 72 setting up 72 Privacy mask 68 PTZ control panel description 33 PTZ dome cameras configure 71 connecting dome cameras to the recorder 11 control remotely 124 PTZ protocols assig 71 configuring Interlogix cameras 137 R Recorder address change 98 Recorder name change 98 Recording recording schedules 86 167 Recording schedules daily 87 100 defining 86 Remote alarm host settings 95 Remote control connect to the recorder 23 description 22 Resolution change monitor resolution setup 98 Restricted access 70 RS 232 port configuring 101 S S M A R T information on a HDD 107 Search bookmarks 42 recordings by event 46 snapshots 47 system logs 118 Sequencing cameras 30 Setup wiza
23. Press Archive on the front panel or remote control to open the quick archive window 3 Click Start or press Archive on the front panel again The unit starts to download all the files listed Note If there is a capacity limitation on the backup device only the most recent files will be backed up A message will appear to confirm when the download is complete TruVision DVR 44HD User Manual 49 7BChapter 8 Archiving files Archive menu You can insert a mini USB hub to the USB port to attach a mouse for navigation or a USB drive for archiving However the unit may not support all tyoes of USB hubs The Archive options available may depend on the type of backup device selected Figure 16 Example of an archive menu Art hive Appro 09 14 2017 16 58 42 08 22 2010 22 23 50 03 12 2014 17 20 00 03 12 2014 17 20 00 03 12 2014 17 20 00 03 12 2014 17 20 00 03 12 2014 17 19 58 03 12 2014 17 19 44 03 12 2014 18 00 58 IF Camera mpal Folder E CE marking doc UKB File E cho1_ 20140312124 3 633KB File E chO1_ 70140312124 OKB File W ch01_20140312132_ 4 AOTKB File E cho1_ 270140312713 OKB File B ch01_ 20140312132 208MB File E ch0i_ 20140312132 1KB File 1 69 7KB File 1 e 1e61 player exe 23 4AT2ZKB New Folder Archive D E Description Function e Click the Refresh button e Reconnect device e Check for compatibility from vendor 2 Refresh Refresh the search results if any parameters have
24. Settings Notticahons Video Loss Alarm Host Setup Select the alarm input number of a camera which corresponds to the connector on the back panel of the recorder and enter the name of the input if required Select the alarm input type NO normally open or NC normally closed Default is NO Check the Enable Alarm Input box and click Actions to set up the rules for the cameras to be triggered their alarm schedules method of alarm notification and PTZ linking function Select the cameras to be triggered when an external alarm is detected Check the Actions button In the Actions window that appears click the Trigger Channel tab and then select the cameras to be triggered for recording when an alarm is detected Only analog cameras can be selected Click Apply to save the settings Select the recording schedules for the external alarm TruVision DVR 44HD User Manual 12BChapter 13 Alarm and event setup In the Actions window click the Arming Schedule tab and select the day of the week and the time periods during the day when motion can be recorded You can schedule up to eight time periods in a day Default is 24 hours Click Apply to save the settings Click Copy to copy these settings to other days of the week Note The time periods defined cannot overlap 7 Select the response method to an external alarm In the Actions window click the Actions tab to define the method by which you want the recorder to notify y
25. Y Y Y N N N N N Y Y Y Y HIKVISION Y Y Y Y Y Y Y Y Y Y Y Y Y Honeywell Y Y Y Y N N N N N Y Y Y Y INFINOVA Y Y Y Y N N N N N Y Y Y Y KTD 348 Y Y Y Y N N N N N Y Y Y Y LG MULTIX Y Y Y Y N N N N N Y Y Y Y LILIN Y Y Y Y N N N N N Y Y Y Y oi Y Y Y Y N N N N N Y Y Y Y PELCO D Y Y Y Y Yo y Y ve Y Y Y Y Y PELCO P Y Y Y Y y y y y Y Y Y Y Y PHILIPS Y Y Y Y N N N N N Y Y Y N PHILPS 3 Y Y Y Y N N N N N Y Y Y Y SAE Y Y Y Y N N N N N Y Y Y Y Samsung Y Y Y Y N N N N N Y Y Y Y Siemens Y Y Y Y N N N N N Y Y Y Y 2 Y Y Y Y N N N N N N N N N SONY EVI D70 Y Y Y Y N N N N N N N N N Sa Y Y Y Y N N N N N N N N N TECHWIN Y Y Y Y N N N N N N N N N 152 TruVision DVR 44HD User Manual PTZ command Protocol Tiltup Tilt Pan Pan Left dow left righ up n t VICON Y Y Y Y N YOULI Y Y Y Y N Hikvision only Left dow Right Right up dow n N N N N 24BAppendix G Supported PTZ commands Table 27 Supported PTZ commands by camera protocols Part 2 PTZ command Protocol lris Iris Light Interlogix 485 Interlogix 422 KALATEL DSCP HIKVISION Honeywell INFINOVA KTD 348 LG MULTIX lt lt lt lt lt lt lt lt lt lt lt lt lt lt lt ZIZI ZIZI ZI ZI ZIZI Z zZ ZIZI Z 2 2 2 2 2 2 2 LILIN PANASONIC _ CS850 lt lt Z Z PELCO D PELCO P PHILIPS PHILPS 3 SAE Samsung lt lt lt lt x lt lt lt lt lt lt x lt x ZIZI es ee ee Z Siemens
26. a qualified network technician for further information Port 80 HTTP protocol Used to connect via IE browser Port 8000 Client Software Port Used to connect to video streams Port 554 RTSP Port Real time streaming protocol Used to record video remotely Port 1024 RTSP Port for 3G 4G Use with mobile apps Used for 3G 4G connection Note It is recommended that the RTSP port 1024 should only be used when experiencing connection issues over a 3G 4G connection Seeking further assistance Third party assistance on configuring popular routers can be found at http www portforward com http canyouseeme org http yougetsignal com Note These links are not affiliated with nor supported by Interlogix technical support Many router manufacturers also offer guides on their websites as well as including documentation with the product On most routers the brand and model number is located on or near the serial number sticker on the bottom of the device TruVision DVR 44HD User Manual 135 20BAppendix C Port forwarding information lf you cannot find any information for your particular router please contact your router manufacturer or internet service provider for further assistance 136 TruVision DVR 44HD User Manual Appendix D Connect a PTZ dome camera Any PTZ dome camera can be controlled as the recorder is doing the PTZ protocol translation However this setup provides only limited dome configuration See Figure 4 bel
27. a warning buzzer You can modify the time during which the warning buzzer sounds for both system and camera alarm Select Alarm amp Event Setup gt Buzzer Settings and select a buzzer time limit for the system and camera alarms Select Mute 5s 10s 20 s 30 s 60 s 120 s 240 s or Constant Default is mute 92 TruVision DVR 44HD User Manual 12BChapter 13 Alarm and event setup Alarm notification types When setting up the rules for alarm detection you can specify how you want the recorder to notify you about an alarm or event You can select more than one notification type Not all notifications types are available for all types of alarms You can quickly check the system status by looking at the status LEDs on the front panel The alarm notification types are e Full screen Monitoring When an alarm is triggered the monitor VGA or HDMI displays an image in live view mode For alarms that are triggered simultaneously images display one at a time every 10 seconds default dwell time You can set a different dwell time using the Sequence Dwell Time setting under the Display Settings gt Display window When the alarm stops cycling of the images stops and you return to live view mode This alarm option must be selected for each channel where it is required e Enable Alarm Audio Triggers an audible beep when a notification or alarm is detected by the system or a camera e Notify Alarm Host Sends a signal to TruVision Navigator or
28. back search results 1 In live view right click the mouse on the desired video pane and select Search Video The Search menu appears 2 Inthe Search menu click the Event tab 3 Select the desired event type as well as start and end times of the recording 4 Select the desired alarm inputs or channels If you selected Intelligent Alarm as the event type select the required IP cameras 5 Click Search The list of search results appears 6 Select the desired video from the list 7 Inthe search results window you can Click Play to playback the footage Click Archive to archive results Click Details to display more information about an event Note You can modify the pre and post play periods of a recording 46 TruVision DVR 44HD User Manual 6BChapter 7 Searching files Search bookmarked recordings For information on creating bookmarks see Create bookmarks on page 41 To search for a bookmark 1 In live view right click the mouse on the desired video pane and select Search Video The Search menu appears 2 Inthe Search menu click the Bookmark tab 3 Select the desired cameras as well as start and end times of the recording to be searched Also select the type of bookmark to be searched If searching for customized bookmarks enter a keyword from the bookmark name Click Search The list of bookmarks appears 4 Select the desired bookmark from the list 5 Select a bookmark and do one
29. button 9 Channel buttons 10 USB 2 0 port TruVision DVR 44HD User Manual 3BChapter 4 Operating instructions Description EE Reverse Press to jump back to the oldest available video and start the playback E Pause Press to pause playback E Play Press to start 24 hour playback of the currently selected camera If you are in multiview format only the camera shown in the top left corner of the multiview is played back Live Switch to live view mode Press and hold for five seconds to lock live view No actions can be carried out from the front panel during this time Mouse actions are still allowed Live view remains locked until the button is pressed again for five seconds Replay In playback mode start playing the current file Starts at the beginning of the file Receiver for IR remote Zoom In live view mode playback mode and PTZ control mode use this button to zoom in and out Also use them to navigate within menus Preset In PTZ Control mode press Preset and a numeric button to call the specified preset Also use to edit holiday mode video search mode HDD selection mode user management mode bookmark management and bookmark search Tour In PTZ Control mode press Tour and a numeric button to call the specified shadow tour Also use to scroll between calendar months and to navigate in a text field See Table 3 on page 20 for a detailed description of all these buttons for different tasks
30. call up the previously used line to detect motion If you want to reposition or change the line click the delete icon and draw a new line See Line crossing detection on page 64 for further information Click to call up the previously used quadrilateral shape to detect motion If you want to reposition or change the shape click the delete icon and draw a new shape See Intrusion detection on page 66 for further information Draw a regtangle modify the size of the motion detection area in the view Select full screen motion detection Delete the motion function selected Start motion search Exit motion search 8 Click gt to retrieve the motion events The standard playback view opens containing all recordings for the period of time selected Motion events are shown in blue in the time bar Click on the time bar to skip from one motion event to the next Motion recording period includes pre and post event recording periods Motion event 89 Li 40 a be Constant uel Motion Alarm Text inse Search and play back recordings by time and video type You can search recorded video by time and video type such as continuous recordings motion alarms and all recordings Video can be played back simultaneously across several cameras To search archived video files 1 In live view right click the mouse on the desired video pane and select Search Video The Search menu appears Select the desired camera
31. forwards or backwards by 30 s Press the button to pause the video Press again to restart the video In single frame Playback mode press to advance the video by a single frame Press to play back a camera in reverse direction In Picture Playback mode view pictures in reverse direction In Playback mode stop playback In Playback mode play back a camera in the forward direction The left and right buttons are used to jump recorded video forwards or backwards by one frame The up and down buttons are used to jump recorded video forwards or backwards by one second Press to control the movement of the PTZ camera Press to zoom in and out Press Preset and a numeric button to call the specified preset Press Tour and a numeric button to call the specified shadow tour TruVision DVR 44HD User Manual 3BChapter 4 Operating instructions Task Button Button function Play Press to do an auto tour Display Press to delete a selected key point from the PTZ Setting gt More Settings gt Tour gt Key Point list Menu navigation Direction Press to navigate between different fields and items in menus Menu Enter exit the main menu Enter Press to confirm the selection in any of the menu modes Using the mouse The USB mouse provided with the recorder can be used to operate all the functions of the unit unlike the front panel which has limited functionality The USB mouse lets you navigate and make changes to settings in the user
32. interface Connect the mouse to the recorder by plugging the mouse USB connector into the USB port on the back panel or the front panel The mouse is immediately operational and the pointer should appear Note Use a USB 2 0 mouse Move the pointer to a command option or button on a window Click the left mouse button to enter or confirm a selection You can purchase a spare mouse by ordering part number TVR MOUSE 1 See Table 6 below for a description of the mouse buttons Table 4 Mouse buttons Item Description Left button Single Click Live view Select a camera to display the live view toolbar Menu Select a component of a menu such as a button or an input field This is similar to pressing the Enter button on the remote front panel controls Double Click Live view Switch between single screen and multi screen mode in live playback mode Click and Drag Live view Drag channel time bar PTZ control Adjust pan tilt and zoom Tamperproof privacy masking and motion detection functions Select the target area Digital zoom in Drag and select target area Right button Single Click Live view Display menu Menu Exit the current menu and return to higher level Scroll wheel Scroll Up Live view Return to the previous window Menu Move the selection to the previous item TruVision DVR 44HD User Manual 21 3BChapter 4 Operating instructions Item Description Scroll Down Live view Move to the next window Men
33. of the following Click the Edit button to edit a bookmark s name Or Click the Delete button to delete a bookmark Or Click the Play button to play back a bookmark Search snapshots You can search video snapshots See Live view mouse menu on page 28 on how to create Snapshots To search for snapshots 1 In live view right click the mouse on the desired video pane and select Search Video The Search menu appears In the Search menu click the Snapshot tab Select the desired cameras as well as start and end times of the recording to be searched Click Search The list of snapshots appears oo ae dy Select a snapshot to see it in the thumbnail window Click its Play button to see it in full screen mode 6 When in full screen mode move the cursor to the right edge of the window to see the complete list of snapshots found in the search Click their Play buttons to see them in full screen mode 7 To see a slideshow of all the snapshots found click the or lt buttons on the snapshot toolbar to sequence forwards or backwards through the shots TruVision DVR 44HD User Manual 47 6BChapter 7 Searching files Log search You can open video footage from the results of a log search Refer to Search the system log on page 118 for more information Disk analysis The recorder can run a disk analysis to get a broader sense of the video data stored on the HDD This video data can include alarms eve
34. or control the relay output of the recorder Alarm and notification settings must be configured properly to upload to host e Remote Advanced Operation Remotely manage HDDs initializing and setting properties for HDDs as well as remotely update system firmware and clear the I O alarm output e Remote Shutdown Reboot Remotely shutdown or reboot the recorder Camera configuration settings By default all analog cameras are enabled for operators for each of these settings By default the analog cameras are only enabled for local playback and remote playback for guests IP cameras cannot be configured e Local Live View Locally select and view live video e Local Playback Locally play recorded files that are on the recorder e Local Manual Operation Locally start stop manual recording on any of the channels snapshots and video clips e Local PTZ Control Locally control PTZ dome cameras e Local Video Export Locally back up recorded files from any of the channels e Remote Live View Remotely select and view live video over the network e Remote Playback Remotely play and download recorded files that are on the recorder e Remote Manual Operation Remotely start stop manual recording on any of the channel e Remote PTZ Control Remotely control PTZ dome cameras e Remote Video Export Remotely backup recorded files from any channel To customize a user s access privileges 1 Click the User Management icon in the menu tool
35. other software applications when an alarm or notification is detected e Send Email Sends an email when an alarm or notification is detected See E mail settings on page 81 for information on how to configure the recorder to send an email e Upload Snapshots to FTP Capture the image when an alarm is triggered and upload the picture to NAS or FTP server e Trigger Alarm Output Triggers an alarm output or multiple alarm outputs when a notification is detected for an external alarm See Types of system alarm notifications on page 94 for information on configuring an alarm output e Display Event Icon When an alarm is triggered in the system an icon appears on screen to also alert you See Status information on page 27 for further information e Event Priority Define the priority between a text insertion event and a motion alarm if both are triggered at the same time Default is a motion alarm Text In lt Motion To set up system notifications 1 From the menu toolbar click Alarm amp Event Setup gt Notification 2 Select a system alarm notification type see Types of system alarm notifications on page 94 3 Check one or more response method Display event icon event priority enable alarm audio notify alarm host send email and trigger alarm output Note The list of options available depends on the system alarm selected 4 Repeat steps 2 and 3 for other system notification types 5 Click Apply
36. recorder Use the input output box that is supplied with the keypad to connect the KTD 405 keypad to the recorder As the KTD 405 keypad uses full duplex data communication you cannot connect the both keypad and a dome camera directly to the recorder from the RS 485 port as this could cause problems on the bus If both devices are required it is recommended that you use the keypad s RS 422 connection to connect the dome camera and the keypad s RS 485 connection to connect the recorder See Figure 5 as well as Table 4 and Table 5 below Note These connections only work with UTC PTZ protocols see Appendix B PTZ protocols on page 134 If you are using another manufacturers PTZ protocol it is not possible to connect both a keypad and dome camera to the recorder 148 TruVision DVR 44HD User Manual KTD 405 keypad Figure 40 Connecting a PTZ dome camera and KTD 405 keypad to the recorder soes g ow ge 95220 0 01 A Reali OUT E SPLAKEE HDL m SPEAKER 1 KTD 405 keypad RS 232 programming port RS 485 and RS 422 in out RS 485 termination switch eo ey Table 24 UTC PTZ protocol settings Dome RS 422 protocol AUDI ma E77 pn 5 155 jas B RS 485 jA _ RJ45 cable control use the cable provided with the equipment I O box Recorder back panel Dome camera Recorder Interlogix RS 485 see Table 5 below for the bus addresses to consider when connecti
37. recorder are analog You need to disable an analog camera in order to add an IP camera You can quickly see an overview of all the analog cameras and their status in the Analog Camera Overview screen see Figure 19 on page 57 The number of cameras displayed depends on the recorder model You can also select a camera to live view the image When an analog camera is enabled or disabled the system must reboot for the changes to take effect 56 TruVision DVR 44HD User Manual 9BChapter 10 Camera setup Figure 19 Overview of analog cameras window 8 channel recorder model shown List of all the analog channels number depends on Click to live view the selected analog camera recorder model ss a al F 7 IP Camera Status Camera No Camera Name Camera Recording Snapshots i A3 Camera 03 Enable Ad Camera 04 Enable Camera OSD Camera 05 Enable image AG Camera 06 Enable Motion Detection AT Camera 07 Enable s ae Enable VCACSMD Privacy Mask Analog Camera Status Camera Tamper E Analog TE TE aa aa BAs AG Restricted Access Please disable analog channels to enabl If Channels starting with channel 1 by unchecking the PTZ Setup PTZ Presets Tours V Stream Encoding Apply Camera Setup Disable an analog camera in order to add an IP camera To enable or disable an analog camera 1 2 From the menu toolbar click Camera Setup gt Analog Camera Overview In the Status section check t
38. return to live view Network statistics You can easily check the bandwidth that is being used by remote live view and playback To check network statistics 1 From the menu toolbar click Network Settings gt Net Stat 2 The latest information is displayed on the bandwidth used by remote live view and playback as well by Net Receive Idle and Net Send Idle Click Refresh to update the information 3 Click Exit to return to live view TruVision DVR 44HD User Manual 85 Chapter 12 Recoraing Use the Recording menu to define the camera recording schedules modify the instant playback duration and to select the cameras for manual recording Recording schedule Defining a recording schedule lets you specify when the recorder records video and which pre defined settings are used Each camera can be configured to have its own recording schedule The schedules are visually presented on a map for easy reference See Figure 27 below for a description of the recording schedule window Figure 27 Description of the recording schedule window nn ee Pot Pa i General Manual Recording i Egi TL Hi oO T Evant Alan ed A _ Mam Ho Recor 5 Ee No Recording 6 Note Operation is invalid when the number of time segments exceeds the limit 8 i g fa py D 1 Camera Select a camera 2 Schedule time Represents the 24 hour cycle during which a schedule is selected 3 Schedu
39. supports POS and ATM text insertion via text insertion accessories connected to the RS 232 port of the recorder To set up text insertion 1 Set up the RS 232 port for appropriate interface Probridge or ATS Challenger 2 From the menu toolbar click Device Management gt Text Insertion 3 Check Enable Text Insertion 4 Under Access Device select the access device from the drop down list Only ATM POS is listed 5 Under Access Mode select Probridge or Forcefield Note Forcefield is used with the Challenger intrusion panel 6 If Probridge is selected under Start String enter a repeating word that appears on each cash transaction receipt and that is followed by the information you want to record An example could be the word Date The text shown will only be the text as of this start string 7 Click Apply to save the settings 8 Continue to configure the recorder or click Exit to return to live view lt is important to take into account that different ATM POS and other text generating devices use different protocols For this reason please consult your local technical support or sales representative for more information Configure the RS 232 port Use the RS 232 menu under Device Management to configure the RS 232 parameters such as baud rate data bit stop bit parity flow control and interface TruVision DVR 44HD User Manual 101 13BChapter 14 Device management Figure 30 RS 232 setup window rr
40. to control playback speed 10 OK Confirm selection 11 Zoom and Use to control zoom of camera lens 12 Preset Enter preprogrammed three digit code to call up a preset 13 Tour Enter preprogrammed three digit code to call up shadow tour 14 Focus and Use to control focus of camera lens 15 Playback control Use to control playback Rewind Pause Play and Fast Forward 16 Search Open the Search menu 17 Replay Replay the selected file from the beginning 18 Eject Eject the CD or DVD disk 19 Archive Press once to enter quick archive mode Press twice to start archiving Aim the remote control at the IR receiver located at the front of the unit to test operation To change the address of the remote control to the recorder 1 Press the Menu button on the front panel or right click the mouse and select the Menu button The default display menu window appears 2 Click Device Management gt General Settings 3 Check the remote control ID value The default value is 255 This device address is valid for all IR controls Note The recorder will respond to any remote control that has an address between 1 and 255 4 On the remote control press the Device button 5 Enter the device address value It must be the same as that on the recorder 6 Press the OK button on the remote control To place batteries into the IR remote control 1 Remove the battery cover 2 Insert the batteries Make sure that the posit
41. to return to the main window 7 Click Exit to return to live view Restricted access camera Restricted access cameras are cameras that are only visible to specific users There may be occasions when you want to control who can see a camera image on a local monitor such as if there is a camera located in a changing room The recorder lets you select which camera or cameras is not displayed on the local monitor unless the user is logged in and has permission to view the camera images A restricted access camera is not displayed on screen when no user is logged in Instead a person walking by sees a black screen See Figure 23 below Figure 23 Example of a restricted access camera image 70 TruVision DVR 44HD User Manual 9BChapter 10 Camera setup To set up a camera for a restricted access view 1 From the menu toolbar click Camera Setup gt Restricted Access Camera 2 Check which analog camera or cameras you want to have restricted access and click Apply 3 Click Exit to return to live view Configure PTZ settings Use the PTZ Setup menu to configure only analog PTZ dome cameras Each analog camera must be set up individually The cameras must be configured before they can be used Ensure that the PTZ dome cameras are correctly connected to the RS 485 port on the back panel Note If a camera does not work correctly after configuring the recorder check the parameters entered To configure PTZ dome camera settings
42. to save the settings 6 Click Exit to return to live view TruVision DVR 44HD User Manual 93 12BChapter 13 Alarm and event setup Types of system alarm notifications The different types of system alarm notifications are HDD Full All installed HDDs are full and will not record any more video HDD Error Errors occurred while files were being written to the HDD there is no HDD installed or the HDD had failed to initialize Network Disconnected Disconnected network cable Duplicate IP Address Found There is an IP address conflict with another system on the network Illegal Login Wrong user ID or password used Input Output Video Standard Mismatch O video standards do not match Input Recording Resolution Mismatch There is a mismatch between the expected and provided stream from the camera Abnormal Record HDD cannot record any more files This could be due to the overwrite option being disabled so recorded files are locked and cannot be deleted Detect video loss Video may be lost if the camera develops a fault is disconnected or is damaged You can set up the recorder to detect video loss and trigger a system notification To setup video loss detection 1 2 3 4 5 94 From the menu toolbar click Alarm amp Event Setup gt Video Loss Select a camera to configure for video loss detection Check the Enable Video Loss Alarm box to enable the feature Click the Actions button to enter the Actio
43. under the camera name on top right of window Speed up Click to scroll through the different speeds available single frame 1 8 speed 1 4 speed Ve speed normal X2 speed X4 speed X8 speed maximum speed Current speed is displayed under the camera name on top right of window Single frame Click to play back one frame at a time iG Stop streaming Stop streaming from all cameras 8 Audio and video control toolbar ic Digital Zoom Access digital zoom See Digital zoom in playback on page 41 for further information EJ Text insertion Click to enable disable POS ATM text display in playback Snapshot Capture a snapshot of the video TruVision DVR 44HD User Manual 125 17BChapter 18 Using the web browser Description dy Video clips Start stop video clip during playback Sections of a recording can be saved to an external storage device Fa Download Download video clips H Backup Click to make back up of recorded files to save locally on the recorder A list of the recorded files appears t Audio Click to enable disable audio EX Bookmark management Manage bookmarks 9 Jump start Enter a precise time in the box and click the Go To button to jump start the playback to this selected time 10 Type of recording Dark green Indicates video recorded based on the recording schedule defined Red Indicates video recorded triggered by an alarm event Yellow Indicates video recorded triggered by mo
44. ww A A Time amp Date Settings 115200 8 1 General Settings Configuration Files Upgrade Firmware None Holiday None Technical Support ab A 4 Text Insertion Device Management Table 16 Description of the RS 232 settings window Option Description 1 Baud Rate This is a measure of the speed of data transmission Default is 115200 2 Data Bit A bit is the smallest unit of data in a serial communication message A data bit is the bit carrying the information as opposed to the start bit and the stop bit Default is 8 3 Stop Bit Stop bits mark the end of a transmission of a serial communication message Default is 1 4 Parity The method used to detect errors in the number of bits being transmitted Default is None 5 Flow Ctrl Flow control is the process by which data transfer is regulated so that it does not arrive too quickly for the receiving process Default is None 6 Interface Select one of the three ways the RS 232 port can be used ProBridge POS and ATM text insertion supported via the ProBridge accessory connected to the RS 232 port See Text insertion on page 101 for more information Challenger NTP time sync supported to foreign device over the RS 232 port Technical Support Console mode 102 TruVision DVR 44HD User Manual Chapter 15 storage management This chapter describes the content of the Storage Management menu including HDD information Storage Mode S M A
45. 0r In the preset tour toolbar click to delete all the preset tours 3 Click Exit to return to live view To set up a shadow tour 1 From the menu toolbar click Camera Setup gt PTZ Preset Tours 2 Select the shadow tour from the drop down list 3 To record a new shadow tour click and use the directional buttons on the PTZ control panel to move the camera along the desired path 4 Click E to save the shadow tour Note The shadow tour can be overwritten 5 Click Exit to return to live view To call up a shadow tour 1 From the menu toolbar click Camera Setup gt PTZ Preset tours 2 Select the shadow tour from the list and click CJ to start the tour Click to stop the shadow tour 3 Click Exit to return to live view V stream encoding The V stream shows all camera channels within one camera tile V stream is available for remote use with the browser interface mobile application TruVision Navigator or third party software implementation This feature is particularly useful if you have limited bandwidth available on a remote location but still want to be able to view all camera tiles at once 74 TruVision DVR 44HD User Manual 9BChapter 10 Camera setup Note It is not recommended to use the V stream feature when a analog monitor is used as a main monitor because the analog main monitor and the V stream use the same output To enable V streaming 1 Click the Display Settings gt V stream Encoding
46. 5 Repeat steps 3 and 4 for each extra line of text selecting the next string number 6 Click Save TruVision DVR 44HD User Manual 131 Appendix A Specifications Video amp audio input Video compression Analog video input Audio compression Audio input Bidirecitonal audio Video amp audio output HDMI output VGA output Analog output Encoding resolution Video bit rate Audio output Audio bit rate Dual stream Stream type Playback resolution Synchronous playback 132 TVR 4408HD TVR 4416HD H 264 8 ch 16 ch BNC HD TVI BNC HD TVI 1 0 Vp p 75 Q 1 0 Vp p 75 Q PAL NTSC self adaptive PAL NTSC self adaptive G711u 4 ch RCA 2 0 Vp p 1 kQ 1 ch reduplicated with audio input 1 RCA 2 0 Vp p 1 KQ 1 ch Resolution 1920 x 1080P 60 Hz 1280 x 1024 60 Hz 1280 x 720 60 Hz 1024 x 768 60 Hz 1 ch Resolution 1920 x 1080P 60 Hz 1280 x 1024 60 Hz 1280 x 720 60 Hz 1024 x 768 60 Hz 1 ch BNC 1 0 Vp p 75 Q Resolution PAL 704 x 576 NTSC 704 x 480 Main stream 1080P non real time 720P VGA WD1 4CIF CIF Substream WD1 non real time 4CIF non real time CIF QCIF QVGA 32 Kbps to 6 Mbps 1 ch RCA 64 Kbps Support Sub stream at CIF 6 fps QCIF 25 fps PAL 30 fos NTSC Video Video amp Audio 4CIF 2CIF CIF QCIF 720P 1080P 8 ch 16 ch TruVision DVR 44HD User Manual Hard disk SATA e SATA Capacity per HDD External interfa
47. Alarm Host 3 IP Null Alarm Host 3 Port 5001 Device Management Time amp Date Settings DST Settings Time Zone GMT 08 00 Pacific Time U S amp Canada Date Format MM DD YYYY Time Format 12 hour Display Day Disable System Date Current System Date System Time Current System Time Auto DST Adjustment Disable Enable DST No From Apr 1st Sun 2 00 To Oct last Sun 2 00 DST Bias 60 minutes TruVision DVR 44HD User Manual 161 25BAppendix H Default menu settings General Settings General Configuration Files Language English Device Name TVR 44HD Remoter Control ID 255 Keypad Zone ID 1 Password Required No Enable Wizard Yes Start Wizard Now No Menu Timeout 5 Minutes Mouse Pointer Speed Low Enable Front Panel Lock No Import Export Config Files Upgrade Firmware Local Upgrade Holiday Device Name Null Source USB Device Name Null Holiday Settings Text Insertion Text Insertion RS 232 Settings Status All Disabled Start Date 1st Jan End Date 1st Jan Enable Text Insertion No Access Device ATM POS Access Mode Probridge Start String Null RS 232 Settings 162 Baud Rate 115200 Data Bit 8 Stop Bit 1 Parity None Flow Ctrl None Interface ProBridge TruVision DVR 44HD User Manual 25BAppendix H Default menu settings Storage Management HDD Information Label Disable Total Capacity Free Space Overwrite Enable Storage Mode Storag
48. DMI Default is VGA HDMI The factory default multiview format displays all channels 2x2 layout for the 4 channel TVR 44HD and 4x4 layout for the 8 16 channel TVR 44HD Set the length of time for which a camera image is displayed on the selected monitor before moving to the next camera during sequencing Default is off No Switch Select whether to hear audio from cameras in both live and playback mode However in order to be able to hear audio in playback you must enable the audio output setting Default is Disable Check the box to enable disable audio output Select which monitor will be the event monitor showing full screen monitoring in case of events HDMI VGA or Main BNC Default is Main analog Set the length of time during which an image is displayed on the event monitor in full screen in case of an event Default is 10 seconds Set the length of time during which an image is displayed on the event monitor in full screen in case of an alarm Default is 10 seconds The Layout window allows you to define the layout of each of the different views as they are shown when selecting the different live views or the sequencing order The cameras are sequenced in numeric order by default You can change the order of the cameras for all monitors 54 TruVision DVR 44HD User Manual Display settings The camera order in the different views is consistent This means that if Channel 2 is the first camera shown in the s
49. Edit User pop up window appears 3 Edit the current admin password and check the Change Password box 4 Enter the new admin password and confirm it Change the admin MAC address if required Click OK to save the settings and return to the previous window 5 Click Exit to return to live view 114 TruVision DVR 44HD User Manual Chapter 17 system information View system information To view system information 1 From the menu toolbar click System Information 2 To view device information click Device Info You can view the device name model serial number firmware version and encoding version TVR 12HD TVR1204cHD Record TVR1204cHD0420 14092 AAWROSO0082492WCVU Alarm Inputs V1 0 d Build 141031 Alarm Outputs V5 0 Build 141031 Network HDD Log Search System information 3 To view camera information click Camera You can view the information on each camera camera number camera name status motion detection tamper proof video loss preview link sum and preview link information TruVision DVR 44HD User Manual 115 16BChapter 17 System information lt a Vw mera Device Info pr abn hd SSS Al A2 Alarm Inputs A3 A4 Record Alarm Outputs Network HDD Log Search System information PS A aa Ann 4 Camera Name Status Camera 01 Camera 02 Camera 03 Camera 04 Enabled Enabled Enabled Enabled Motion Detection Camera Ta Not used Not used No
50. Enable Yes Actions Trigger Channel camera self Arming Schedule All day for whole week Actions Null Line Line1 Direction A lt gt B Sensitivity 99 Privacy Mask Settings Camera Analog 1 Enable Privacy Mask No Zone Null Camera Tamper Settings Camera Analog 1 Enable Camera Tamper No Actions Arming Schedule All day for whole week Actions Null Sensitivity 0 TruVision DVR 44HD User Manual 25BAppendix H Default menu settings Restricted Access Camera Restricted Access Camera Settings Cameras Null PTZ Setup Settings Camera Analog 1 Baud Rate 9600 Date Bit 8 Stop Bit 1 Parity None Flow Ctrl None PTZ Protocol Interlogix 485 Address 0 to 15 for camera 1 to 16 PTZ Preset Tours Preset Tours Camera Analog 1 V stream Encoding V stream Encoding Enable V stream Encoding Yes Frame Rate 12fps Max Bitrate Kbps 1024 Networking Settings Network Settings Network Settings NIC Type 10 100M 100M Self adaptive Enable DHCP No IPv4 address 192 168 1 82 IPv4 Subnet Mask 255 255 255 0 IPv4 Default Gateway 192 168 1 1 Mac Address Preferred DNS Server Null Server Port 8000 Multicast IP Null Enable Telnet No IPv6 Address 1 Null IPv6 Address2 Null IPv6 Address Gateway Null MTU 1500 TruVision DVR 44HD User Manual 157 25BAppendix H Default menu settings 158 PPPoE DDNS NTP Email PPPoE DDNS NTP Email Alternate DNS Server Null
51. Net Total Idle 60Mbps 159 25BAppendix H Default menu settings Recording Recording Schedule General Recording General Manual Recording Alarm amp Event Setup 160 Alarm Input Alarm Output Manual Trigger Buzzer Settings Notifications Total Bandwidth Limit 60Mbps Camera Analog 1 Enable Recording Yes Schedule All day for whole week TL Hi Instant Replay Duration 5 minutes Manual Recording Alarm Input Alarm Output Manual Alarm Analog Off IP Camera Off Alarm Input No A lt 1 Alarm Input Name Null Type NO Enable Alarm Input No Actions Trigger channel No Alarm schedule All day for whole week Rule Null PTZ link Null Alarm Output No A gt 1 Alarm Output Name Null Time Out 5 s Actions All day for whole week Trigger No System Buzzer Time Constant Camera Buzzer Time Constant Notification Display Event Icon Yes TruVision DVR 44HD User Manual 25BAppendix H Default menu settings Event Priority Text In lt Motion Notification Type HDD Full Enable Alarm Audio Disable Notify Alarm Host Disable Send Email Disable Trigger Alarm Output Disable Video Loss Video Loss Settings Camera Analog 1 Enable Video Loss Alarm No Actions Arming Schedule All day for whole week Rule Null Alarm Host Setup Alarm Host Setup Alarm Host 1 IP Null Alarm Host 1 Port 5001 Alarm Host 2 IP Null Alarm Host 2 Port 5001
52. Port RTSP Service Port Total Bandwidth Limit Kbps Description Enter a D class IP address between 224 0 0 0 to 239 255 255 255 Only specify this option if you are using the multicast function Some routers prohibit the use of multicast function in case of a network storm For Technical Support purposes only For security reasons the Telnet port is disabled by default Enter the IPv6 address for the recorder This is the IP address of the local network to which the recorder is connected Default value is fe80 240 3dff fe7e 926f 64 When the recorder is connected to an external network such as the internet the second IPv6 address is automatically assigned Enter the IPv6 address of your network gateway so the recorder will be recognized within the network This is typically the IP address of your router Enter a value between 500 and 9676 Default is 1500 Enter the alternate domain name server to use with the recorder It must match the DNS server information of your router Check your router s browser interface or contact your ISP for the information Use the HTTP port for remote internet browser access Enter the HTTP port value which can be any port number that is not occupied The default value is 80 The RTSP Real Time Streaming Protocol is a network control protocol designed for use in entertainment and communications systems to control streaming media servers Enter the RTSP port value which can be bet
53. Pv6 Address 2 IPv6 Default Gateway Preferred DNS Server Alternate DNS Server Enable DHCP Enable PPPOE PPPOE Address PPPOE Subnet Mask TruVision DVR 44HD User Manual HDD Log search TruVision DVR 44HD User Manual HDD Log search 25BAppendix H Default menu settings PPPOE Default Gateway MAC Address Server Port HTTP Port Multicast IP Label Status Capacity Free Space Property Type Group Start Time End Time Event All Type All 165 Index A Alarm notifications external alarms 90 types 93 video loss 94 video tampering 69 warning buzzer 92 Alarm outputs manually acknowledging 92 Archiving exporting files to a backup device 50 quick archive 49 video clips 51 B Back panel description 9 Bad sector detection 107 Bookmarks create 41 playback 42 saving 42 types 42 Brightness contrast and saturation modifying 62 C Cameras configure PTZ dome cameras 71 layout 54 privacy mask 68 D Daily schedules recording 87 Date configuring display 96 DDNS settings 79 Default settings restore 99 Digital Zoom description 32 playback 36 playback 38 166 web browser 125 Digital zoom in playback 41 Disk analysis searching recorded video 48 DST 96 E Email link to cross line detection alarm 66 68 Email notifications set up 81 eSATA 104 Event logs searching remotely 126 Export configuration settings 99 External alarm setting up to record w
54. R T settings as well as Bad sector detection HDD information You can check the status of any of the installed HDDs on the recorder at any time To check the status of a HDD 1 From the menu toolbar click Storage Management gt HDD Information 2 Note the status of the HDDs listed under the Status column lf the status is listed as Normal or Sleeping the HDD is in working order If it is listed as Abnormal and has already been initialized the HDD needs to be replaced If the HDD is Uninitialized you need to initialize it before it can be used in the recorder Refer to Initializing HDDs above for more information Note The status information is also shown in the System Information gt HDD window Initialize a HDD The built in HDD does not need to be initialized before it can be used You can also re initialize the HDD However all data on the HDD will be destroyed To initialize a HDD 1 From the menu toolbar click Storage Management gt HDD Information 2 Select the HDD to be initialized 3 Click the Initialize button to begin initialization After the HDD has been initialized the status of the HDD changes from Abnormal to Normal TruVision DVR 44HD User Manual 103 14BChapter 15 Storage management Overwrite a HDD You can select how the recorder responds when the HDDs become full and there is no longer sufficient space to save new data The overwrite option is enabled by default To enable overwrite wh
55. Remote Playback by Time Remote Download by File Remote Download by Time Remote Export Config File Remote Import Config File Remote Export Record File Remote Export Snapshot File Remote Get Parameters Remote Get Working Status Connect Transparent Channel Disconnect Transparent Channel Start Two way Audio Stop Two way Audio Remote Alarm Arming Remote Alarm Disarming Remote Operate Bookmark Remote Delete HDD Remote Restore Device Parameters All Local HDD Information HDD S M A R T Start Recording Stop Recording Delete Expired Record System Running Status 17 18 19 20 21 22 Event amp Alarm Information amp Alarm Information Information amp Alarm information Information a Alarm EZ Alarm Information Totali 705 Po 1 8 6 Select a file and click TruVision DVR 44HD User Manual 5 Click the Search button A list of results appears 11 03 2014 11 03 2014 All All Time 11 03 7014 144 900 36 11 03 2014 14 50 36 11 03 2014 14 50 36 11 03 2014 14 50 32 11 03 2014 14 50 32 11 03 7014 14 50 76 11 03 2014 14 50 19 11 03 2014 14 50 19 11 03 2014 14 50 19 11 03 2014 14 50 19 11 03 7014 14 49 41 00 00 00 2359 59 Type Alarm Uwiput Stop Recording Start Motion Detection Start Recording Stop Recording Stop Moton Detection Start Recording Stop Recording Alarm Qutput Start Motion Detection Start Recording Export Eas Paramet
56. Select the time in seconds from the list to stop post recording after the event Default is 5 seconds Auto Delete day Select the number of days after which recorded video from the specified camera is permanently deleted from the HDD A day is defined as the 24 hour period from when the auto delete mode ADM was set The maximum number of days that can be set is 9999 However the actual number of days permitted depends on the HDD capacity If the value is set to 0 the option is disabled Default is disable Record Audio Enable to record sound with the images Default is enable 4 Click Apply to save the settings 5 If you want to save these parameters to another camera click Copy and select the camera in the pop up window that appears Click OK and return to the main window 6 Click Apply to save the settings 60 TruVision DVR 44HD User Manual 9BChapter 10 Camera setup Snapshots You can define the image quality and resolution of snapshots for each camera Snapshots can be taken at any time during live view or playback or can be created when an alarm occurs and sent by email or sent to an FTP server To configure snapshots 1 From the menu toolbar click Camera Setup gt Snapshots 2 Select the desired camera 3 Select the snapshot resolution from the drop down list Select QCIF CIF 4CIF or Maximum Maximum is the maximum available resolution from the camera For analog cameras this is the m
57. TZ movement 4 Toolbar 5 Select PTZ command 6 Exit TruVision DVR 44HD User Manual Description Controls the movements and directions of the PTZ The center button is used to start auto pan by the PTZ dome camera Adjusts zoom focus and iris Adjusts the speed of PTZ movement ai S p ft Turns on off camera light Turns on off camera wiper Zoom area Centers the PTZ dome camera image This command is not supported on all PTZ dome cameras Jumps to the home position Displays the desired function from the scroll bar camera preset preset tour or shadow tour Exits the PTZ control panel 33 4BChapter 5 Live view To call up a preset 1 In live view left click the mouse and select the PTZ control icon in the quick access toolbar The PTZ control panel appears Select the desired camera from the toolbar Or On the front panel select the desired camera and press Enter to call up the quick access toolbar The PTZ control panel appears 2 Scroll the toolbar to Preset and double click the desired preset from the list The camera immediately jumps to the preset position To call up a preset tour 1 In live view left click the mouse and select the PTZ control icon in the live view toolbar The PTZ control panel appears Select the desired camera from the toolbar Or On the front panel select the desired camera and press Enter to call up the live view toolbar The PTZ control pan
58. after which the menu window reverts to live view mode Select a time from the drop down list and click Apply Default value is 5 minutes 8 Mouse Pointer Speed Modify the speed of the mouse pointer Adjust the scroll bar point to the desired level and click Apply Default is the slowest of the four speeds 9 Enable Front Panel Lock When the system logs out the front panel is automatically locked When enabled to unlock the front panel press the Live button for 5 seconds Default is Disable 10 Start Wizard This will immediately start the wizard The system is not rebooted Default is Disable Configuration files You can export and import configuration settings from the recorder This is useful if you want to copy the configuration settings to another recorder or if you want to make a backup of the settings Import and export files Insert an external storage device in the recorder Go to the Device Management gt Configuration Files to import or export configuration settings Click Export to export the recorder s configuration settings into an external storage device or click Import to import configuration settings after selecting a configuration file from the external storage device Restore default settings The administrator can reset the recorder to the factory default settings Network information such as IP address subnet mask gateway MTU NIC working mode server port and default route are not restored to factory d
59. al 109 14BChapter 15 Storage management oN Dapp 110 Click the Add button Select the desired network storage from the drop down list You can set up up to eight systems Under Type select NAS or IP SAN Enter the network storage IP address Enter the network storage directory Click Search to find available directories on the NAS Click OK and return to the HDD Information window Click Apply to save and then Exit to return to live view TruVision DVR 44HD User Manual Chapter 16 User management By default the recorder comes with three user accounts an Administrator account an Operator account and a Guest account These accounts provide multiple levels of access and functionality See Table 17 below for a description of the different user accounts Table 17 User accounts User Description Administrator The administrator account includes extended menu with full access to all settings The Administrator has the authority to add delete or configure parameters for many of the system functions There can only be one administrator The user name is admin The name cannot be modified The default password is 1234 Operator The operator account includes reduced menu access to Video settings inaccessible features are not visible The default user name is operator The default password is 2222 Guest The guest account includes menu access with no programming possibilities inaccessible features are not visibl
60. alarm Indicates that a camera channel is being recorded Indicates a motion detection event Video Loss Indicates a video loss event Indicates manual recording Indicates that live view is locked from the front panel Mouse actions are still allowed Event icon Indicates alarm and system notifications Clicking the icon opens a window that lists the alarms and notifications TruVision DVR 44HD User Manual 27 4BChapter 5 Live view The recorder can display more than one icon at the same time See General settings on page 98 to display or hide the status icons See Alarm notification types on page 93 and enable or disable the option Display Event Icon The system status is displayed on the front panel by the status LEDs Video output The recorder automatically checks the monitor outputs used on startup If more than one monitor is connected it then defines which monitor is the main monitor and which is the event monitor The event monitor is used to display detected events such as motion Only one monitor can be controlled at a time lf a HDMI monitor is used it will be the main output If HDMI and VGA monitors are both connected to the recorder both will be main monitors they will both show the same view See Controlling live view on page 28 for more information on setting up the monitors Monitor A is the main monitor When an alarm or motion is detected the camera with the alarm motio
61. amage To install a HDD 1 Unpack the recorder box 2 Unpack the recorder HDD box Note HDDs in the shipping box are pre mounted with their rail kits caddy 108 TruVision DVR 44HD User Manual 14BChapter 15 Storage management 3 Use the key provided in the accessories box to unlock the recorder front panel 4 Press the latches on both sides of the front panel to open it 5 Install the HDDs as shown below The first drive in position number 1 the second drive in position number 2 etc Continue to install all the hard drives in numerical order 6 Insert a HDD into one of the HDD bays until it has fully seated into position Repeat with the rest of the HDDs wa 7 Close and re lock the front panel Note The HDDs must be installed BEFORE powering up the unit The drives are defaulted to a single HDD group that is automatically ready to record once cameras are added and configured with recording schedules 8 Apply the supplied label to the recorder chassis Place it next to the original label without covering it Note Failure to install the label will affect the warranty of the recorder 9 Initialize the new HDDs See Initialize a HDD on page 103 Add a network storage system You can install a network storage system NAS to remotely store recordings To install a network storage system NAS 1 From the menu toolbar click Storage Management gt HDD Information TruVision DVR 44HD User Manu
62. amera setup 56 Analog camera setup 56 IP camera status 5 7 Camera recording settings 59 Snapshots 61 Camera OSD 61 Image settings 62 Motion detection 63 Line crossing detection 64 Intrusion detection 66 Privacy mask 68 Camera tamper 69 Restricted access camera 70 Configure PTZ settings 71 PTZ presets and tours 71 V stream encoding 74 Network settings 76 Network settings 76 PPPoE settings 78 DDNS settings 79 NTP server settings 80 E mail settings 81 Configure an FTP server to store snapshots 82 SNMP settings 82 UPnP settings 82 Network status 83 Export network packet data 85 Network statistics 85 TruVision DVR 44HD User Manual Chapter 12 Chapter 13 Chapter 14 Chapter 15 Chapter 16 Chapter 17 Chapter 18 Recording 86 Recording schedule 86 Modify the instant replay duration 88 Manual recording 89 Alarm and event setup 90 Set up alarm inputs 90 Set up alarm outputs 91 Manual trigger 92 Buzzer settings 92 Alarm notification types 93 Detect video loss 94 Remote alarm host setup 95 Device management 96 Time and date settings 96 General recorder settings 98 Configuration files 99 Upgrade system firmware 100 Holiday schedules 100 Text insertion 101 Storage management 103 HDD information 103 Managing eSATA 104 Storage mode 104 S M A R T settings 106 Bad sector detection 107 Install HDDs 108 Add a network storage system 109 User management 111 Add anew user 111 Cu
63. and shadow tours See Configure PTZ settings on page 71 for more information Define the v stream parameters See V stream encoding on page 74 for more information Define the general network settings See Network settings on page 76 for more information Define the PPPoE settings See PPPoE settings on page 78 for TruVision DVR 44HD User Manual Menu Recording Alarm amp Event Setup Device Management Function DDNS NTC Email FTP SNMP UPnP More Settings Net Statistics Recording Schedule Manual Recording Alarm Input Alarm Output Manual Trigger Buzzer Settings Notifications Video Loss Alarm Host Setup Time amp Date Setting General Settings Configuration Files TruVision DVR 44HD User Manual 17BChapter 18 Using the web browser Description more information Define the DDNS settings See DDNS settings on page 79 for more information Define the NTC server settings See page 80 for more information NTP server settings on Define the settings to send an e mail See E mail settings on page 81 for more information Define the FTP settings See Configure an FTP server to store Snapshots on page 82 for more information Define the SNMP settings See SNMP settings on page 82 for more information Enable this function so that the recorder can automatically configure its own port forwarding See UPnP settings
64. anual 117 16BChapter 17 System information paa d ag ee Device Info Camera 5 5 i ee Space Property Record Alarm Inputs Alarm Outputs Nebhwork Log Search 931 51 GB 668 GB Refresh System Information 9 Click Exit to return to live view search the system log Many events of the recorder such as operation alarm and notification are logged into the system logs They can be viewed and exported at any time Up to 2000 log files can be viewed at once Log files can also be exported onto a USB device The exported file is named according to the time it was exported For example 20140729124841logBack txt Note Connect the backup device such as a USB flash drive to the recorder before commencing the log search To search video from the system log 1 2 3 118 From the menu toolbar click System Information gt Log Search Select the search start and end date and times Under Event select an option from the drop down list All Alarm Notification Operation or Information From the Type list select one of the options TruVision DVR 44HD User Manual Event All Alarm Notification Operation Information Device Info Camera Record Alarm Inputs Alarm Outputs Nelwork HDO System Information Type All 16BChapter 17 System information All Alarm Input Alarm Output Start Motion Detection Stop Motion Detection Start Camera Tamper Stop Camera Tamp
65. ar for instant playback 36 TruVision DVR 44HD User Manual 5BChapter 6 Playback functionality Figure 12 Playback control toolbar Search playback example shown Description 1 Audio and video control toolbar jE Audio on off A Start stop a video clip during playback Sections of a recording can be saved to an external storage device Vo Add default bookmark Add customized bookmark 5 Bookmark management Click to see the list of bookmarks and their times They can be renamed or deleted EJ Digital Zoom Click to enter the digital zoom function Click again to exit See Digital zoom in playback on page 41 for more information a Smart search for motion detection Click to enter the motion search view o Archive files 2 Playback control toolbar Reverse play the recording Click again to pause Stop playback Time displayed is 00 00 00 Play recording Fast forward playback by the configured skip time default is 30 seconds Reverse playback by the configured skip time default is 30 seconds Decrease playback speed Options available are 1 2 speed 14 speed 1 8 speed single frame Increase playback speed Options available are 2X speed 4X speed 8X speed 32X speed Play previous file day event recording PHBA eeeoe Play next file day event recording in the search result 3 Recording type Description of the color coding of the five recording types that appear in the playba
66. ate the soft keyboard Press and hold esc and then press the arrow buttons to reach the first digit of the password Release esc and press Enter to select the digit Or move the joystick to the first digit of the password and press Enter Repeat steps 2 to 4 for each digit of the password Move the cursor to the Enter button on the soft keyboard and press Enter on the KTD 405 keypad to quit the soft keyboard 144 TruVision DVR 44HD User Manual 22BAppendix E KTD 405 keypad 7 Press and hold esc and then press the arrow buttons to navigate the cursor to activate OK button on the Login screen 8 Press The main menu appears Example 2 To modify a menu option using the keypad 1 Inthe main menu press and hold esc and then press the arrow buttons to navigate to the desired menu icon for example Display Mode Settings Press esc and to go to Display Mode Settings menu Press Zoom or Zoom to scroll to the menu tab More Settings 4 When in the desired menu window press and hold esc and then press the arrow buttons to navigate the cursor to the option Menu Timeout Press to activate the dropdown menu Press and hold esc and then press the up down arrow buttons to navigate to the desired option Press to select the option Press and hold esc and then press the up down arrow buttons to navigate to Apply Press to select it Then navigate to Back to return to live view Instead of the arrow
67. ave settings Repeat steps 4 to 8 for other days of the week or to copy the schedule settings to another day To copy the current schedule settings to another day of the week click Copy Select the number of the day of the week to which to copy the schedule Click OK to save changes and return to the Edit window Repeat steps 4 to 9 for the other cameras Click Apply to save the settings and OK to return to the schedule window The recording schedule window appears showing the schedule selected see Figure 27 on page 86 for an example Modify the instant replay duration The live view toolbar in live view lets you quickly replay recorded video for a preprogrammed period You can easily change this preprogrammed time period See page 30 for more information on the live view toolbar 88 TruVision DVR 44HD User Manual Recording To modify the preprogrammed time of this instant replay go to Recording gt General Select one of the times from the drop down list 5 10 20 or 30 minutes and click Apply Default is 5 minutes Manual recording The recorder lets you manually record video during live view This can be useful if you Know that the recorder is not currently recording and you see something of interest on a camera screen that should be recorded Once a manual recording is started the recording continues until it is manually stopped If an alarm occurs during a manual recording the alarm recording has priority over t
68. aximum available resolution in the camera For IP cameras this is the resolution being recorded 4 Select the snapshot quality from the drop down list low medium or high 5 Click Apply to save the settings 6 To copy the settings to other cameras click Copy and select the desired cameras Click OK 7 Click Exit to return to live view Camera OSD The recorder lets you configure which information is displayed on screen for each individual camera The on screen display OSD settings appear in live view mode and include the camera name time and date They are part of the image and are therefore also recorded To configure the OSD settings 1 From the menu toolbar click Camera Setup gt Camera OSD o MALDD wY 12 hour 5 Non transparent amp Not Flashing 6 Network Settings TruVision DVR 44HD User Manual 61 9BChapter 10 Camera setup 2 Enter a name for the camera 1 if required The name can have up to 32 alphanumeric characters 3 Check the Display Name 2 Display Date 3 and Display Day 4 boxes to display the camera name date and week 4 Select a date format and a time format 5 5 Select how you want the camera information displayed 6 select one of the options from the drop down list Default is non transparent non flashing e Transparent amp Flashing e Transparent amp Not flashing e Non transparent amp Flashing e Non transparent amp Not flashing 6 To change
69. bar to display its window 2 Click the Permission button for the user whose access privileges need to be changed The Permissions pop up window appears 3 Click Apply to save the settings TruVision DVR 44HD User Manual 113 15BChapter 16 User management 4 Click the OK button to return to the previous window 5 Click Exit to return to live view Delete a user Only a system administrator can delete a user To delete a user from the recorder 1 Click the User Management icon in the menu toolbar to display its window 2 Click the Delete button El for the user to be deleted 3 Click Yes in the pop up window to confirm deletion The user is immediately deleted 4 Click Exit to return to live view Modify a user A user s name password access level and MAC address can be changed Only a system administrator can modify a user To modify a user 1 Click the User Management icon in the menu toolbar to display its window 2 Click the Edit button for the user whose details need to be changed The Edit User pop up window appears 3 Edit the user information and click OK to save the settings and return to the previous window 4 Click Exit to return to live view Change the Admin password The administrator s password can be changed in the User Management menu To change the admin password 1 Click the User Management icon in the menu toolbar to display its window 2 Click the Edit button for admin The
70. be set For each alarm host the default port is 5001 5002 and 5003 3 Click Apply to save the settings 4 Click Exit to return to live view TruVision DVR 44HD User Manual 95 Chapter 14 Device management This chapter describes how to e Set up the time and date of the recorder e Select the recorder language and set up general system parameters such as the device name menu timeout period and enable disable password requirement e Import export configuration files e Upgrade the firmware e Set up holiday periods e Enable text insertion e Configure RS 232 settings Time and date settings You can set up the date and time that will appear on screen as well as on time stamped recordings The start and end time of daylight saving time DST in the year can also be set DST is deactivated by default See Figure 20 on page 97 for the Time settings screen 96 TruVision DVR 44HD User Manual 13BChapter 14 Device management Figure 28 Time and date settings window General Settings Configuration Files Upgrade Firmware Holiday k vali 3 im jja f RS 2 3 Settings Device Management GMT 08 00 Pacific Time US amp Canada DD MM YYYY 24 hour E 13 11 2014 12 08 21 E Auto DST Adjustment Table 14 Description of the Time and Date settings window Option 1 Time Zone 2 Date Format 3 Time Format 4 Display Week 5 System Date 6 System Time 7 Auto DST Adjustment 8 Enab
71. been modified 3 Name Files found on the backup device are listed 4 Delete Click to delete a selected file from the backup device 9 Play Click to play selected file 6 Free space Free space available on the backup device is displayed 7 Seal disc Select to prevent other files being recorded onto the disc 8 Include Player Select to automatically include the Player tool when archiving files 9 New folder Create a new folder on the backup device Files from the recorder can be archived to a specific folder 10 Format Format the USB eSATA drive 11 Archive Start downloading selected files onto the backup device 12 Cancel Cancel search and return to previous menu 50 TruVision DVR 44HD User Manual 7BChapter 8 Archiving files To export recorded files to a backup device 1 Connect the backup device to the recorder If using a USB memory drive insert the device into the USB port on the front panel If using a digital video disk DVD or eSATA drive insert the disc into the DVD drive If both media are found in the recorder the USB device takes precedence over the DVD 2 In live view mode press the Search button on the front panel or remote control me ae Right click the mouse and select Advanced Search The Advanced Search window appears 3 Select the cameras and search parameters required 4 Click Search The list of results appears 5 Select the files to export Note You can click the Play button to verify tha
72. bes how to search and playback recorded videos as well as search them by time events bookmarks and snapshots Search video menu You can easily search and play back recorded videos by time and date events bookmarks and snapshots Recordings from both analog and IP cameras are searched Figure 14 The Search menu Event Analog IP Camera Description Bookmark Snapshot Disk Analysis E A1 v GYS Eee S E A5 MAG E A7 E A8 iv D1 amp D2 BD3 10 EDS ED6 ED7 ED8 19 02 2015 10 57 34 06 03 2015 10 36 36 All All 05 03 2015 E 04 44 24 06 03 2015 23 59 59 Motion Search 1 The Search window has five submenus that allow you to carry out different searches by theme Time and date Search all video by time and date of recording Event Search only event recorded files Files can be searched by alarm inputs motion detection text insertion or intelligent alarms Bookmark Search recorded files with bookmarks TruVision DVR 44HD User Manual 43 6BChapter 7 Searching files Description Snapshot Search snapshots Disk analysis The recorder can run a disk analysis to get a broader sense of the video data stored on the HDD This video data can include alarms events video loss and more Recorded video cannot be retrieved from this window 2 Motion Search Search for motion events in a recording 3 Go immediately access archived footage for the start and end time shown See Search and play ba
73. buttons you can also use the joystick on the keyboard Recorder mapping to the KTD 405 keypad Table 22 Recorder mapping to the KTD 405 keypad Task e Menu mode Call up or exit menu Move through the menus Move between menu tabs Navigate to a menu option Select a character or menu option Select the zone ID TruVision DVR 44HD User Manual Keypad action In live view press esc Press and hold esc and then press the arrow buttons or use the joystick Press seq to switch between menu tabs Press and hold esc and then press the arrow buttons or use the joystick Press Enter 2 Press zone to connect the keypad to the recorder Further information To log out the menu go to the Power Manager menu and select Logout gt Down CD Up Left Right Down a Up a Left C Right Note If you press esc before pressing Enter you quit the menu without saving any changes It is the same as Cancel 145 22BAppendix E KTD 405 keypad Task e Live view mode Call up a single camera Call up multiview screens Sequence through cameras Switch to next previous camera Switch between monitor A and monitor B Manually acknowledge an alarm e PTZ functions Enter PTZ mode PTZ functions Up Down Left Right Zoom in Zoom out Leave PTZ mode e Playback functions Search for recorded video 24 hour playback Stop playback Pause playback Select one of the files
74. buzzer settings alarm notifications video loss and alarm host setup See Chapter 13 Alarm and event setup on page 90 Configures system settings including system date and time DST language menu timeout import export config files firmware upgrade holiday schedules text insertion and RS 232 settings See Chapter 14 Device management on page 96 Configures HDD information storage mode S M A R T settings and bad sector detection See Chapter 15 Storage management on page 103 Configures users passwords and access privileges See Chapter 16 User management on page 111 Displays device information camera setup information recording setup information alarm inputs information alarm outputs information network information HDD information and log search See Chapter 17 System information on page 115 Provides reference information to the various toolbars menus and keys within the interface Provides access to logout reboot and shutdown options See Powering on the recorder on page 12 1 In live view press the Menu button on the remote control or front panel Or Right click the mouse and select Menu from the pop up menu The main menu window appears The Display Settings window appears by default 2 Click the required menu icon to display its submenu options Modify the configuration parameters as required TruVision DVR 44HD User Manual 25 3BChapter 4 event s
75. c Off lina Scan Uncorrect Sect OK Uwe f Ulia ATA CRG Error Rate OR Storage Management 3 If you want to continue to use a HDD when the S M A R T test has failed check the box Use when the disk has failed to self evaluate Click Apply to save the settings 4 Click Exit to return to live view Bad sector detection You can improve the performance of your HDDs by ensuring that they have no bad sectors Bad sectors can slow down an HDD when reading or writing data for example TruVision DVR 44HD User Manual 107 14BChapter 15 Storage management Figure 31 Bad sector detection window HDD Information Storage Mode S M A R T Settings 931 51 GB 232 MB Paused 0 To detect bad sectors 1 From the menu toolbar click Storage Management gt Bad Sector Detection 2 Select the HDD you want to test 3 Select whether you want to do a key area detection or a full detection and click Detect 4 The system checks the HDD The color coded result is displayed on screen If there are bad sectors found click Error Info to see a list of the errors found on If required click Pause to pause the test or Cancel to cancel it 6 Click Exit to return to live view Install HDDs You can install up to four HDDs Caution Do not insert or remove HDDs with the recorder powered up Note This unit contains electrostatic sensitive components Before handling the HDDs make sure you are properly grounded to avoid ESD d
76. ce Network interface Serial interface USB interface Alarm in Alarm out Miscellaneous Power supply Power consumption without HDD or DVD R W Operating temperature Relative humidity Chassis Dimensions W x H x D Weight TruVision DVR 44HD User Manual 18BAppendix A Specifications TVR 4408HD TVR 4416HD 4 SATA interfaces 4 SATA interfaces 1 e SATA interface 4TB 1 RJ45 10M 100M 1000M self adaptive Ethernet interface 1 RS 232 interface for ProBridge Challenger Technical Support 1 RS 485 interface for PTZ control or KTD405 keyboard control 3 USB 2 0 16 4 100 to 240 VAC 6 3 A 50 to 60 Hz lt 20 W 10 to 55 C 14 to 131 F 10 to 90 19 inch rack mounted 1 5U chassis 442 x 371 x 74 mm 17 4 x 14 6 x 2 91 in lt 8 kg 17 64 Ib without HDD 133 Appendix B PTZ protocols Interlogix 485 Interlogix 422 KALATEL DSCP HIKVISION Honeywell INFINOVA KTD 348 LG MULTIX LILIN 134 TruVision DVR 44HD User Manual Appendix C Port forwarding information A router is a device that lets you share your internet connection between multiple computers Most routers will not allow incoming traffic to the device unless you have configured them to forward the necessary ports to that device By default our software and recorders require the following ports to be forwarded Note Port forwarding may reduce the security of the computers on your network Please contact your network administrator or
77. chedule overview to mark those times with that specific record mode To mark areas with a different record type click ona different record type to activate it Click Apply to save the settings and Exit to return live view Define a schedule from the Edit menu To set up a daily recording schedule 1 2 3 4 From the menu toolbar click Recording gt Recording Schedule select a camera Check the Enable Recording box Click Edit The following window is displayed TruVision DVR 44HD User Manual 87 11BChapter 12 Recording 10 11 Startf End Time 100 00 00 artit nd lime 0 00 00 00 Start End Time 0 00 00 00 StarvEnd Time 00 00 00 00 tartEnd Time 00 00 00 00 tartEnd Time 00 00 00 tartEnd Time 0 00 00 00 StartEnd Time 100 00 00 Cancel Select the day of the week 1 for which you want to set up the schedule You can define a different schedule for each day of the week Set the start and end time for recording Define a time period by entering a start left column and end right column time You can schedule up to eight time periods Click All Day to record all day Note Time periods defined cannot overlap Select a recording type This setting instructs the recorder to begin recording when an alarm is triggered The recording type can be based on time and triggered by motion detection and or an alarm If set to TimeLapse TL Hi or TL Lo the recorder records continuously Click Apply to s
78. ck progress bar Green indicates continuous recording Yellow indicates motion detection Blue indicates text insertion Pale green indicates manual recording Red indicates alarm recording 4 Call up the Search window to search for recorded video files 5 z Hide the playback control toolbar 6 E For 24 hour playback mode quit playback and return to live view For playback from search mode quit playback and return to the search window 7 Playback bar This bar displays the playback recording It indicates in color the type of recording Constinuous recording is shown in Figure 12 TruVision DVR 44HD User Manual 37 5BChapter 6 Playback functionality Description Timeline Allows you to jump forwards or backwards in time The timeline moves left oldest video to right newest video Click a location on it for where you want playback to start In 24 hour playback the cursor shows the actual time In search playback the cursor is a ball The actual playback time of the ball position and how much playback has already played are also displayed Playback mouse menu You can quickly access playback options by placing the cursor on a playback image on screen and clicking the right button of the mouse The playback pop up menu appears see Figure 13 below The list of options available depends on the type of playback Figure 13 The playback pop up menus A Camera Video Search Digital Zoom I Show Text Overlay 6 Skip Time
79. ck recordings by time and video type on page 45 for further information 4 Search Call up Search result list See below for further information 5 Exit Return to live view Search results A search will usually produce a list of files which may extend to several pages The files are listed by date and time The most recent file is listed first You can then select a file to play it back See Figure 15 on page 44 for an example of a search Only one file can be played back at a time Figure 15 Example of a search result list S arch result Start End Time Size Play Lock 03 12 2014 13 48 10 14 38 49 590 049KB O aa 03 12 2014 13 21 31 13 39 41 213 854KB af HDD 6 Start time 03 12 2014 13 41 31 End time 03 12 2014 13 48 10 Total 3 P 1 1 Total size 77 754KB Archive Cancel 1 Click to playback the selected video 2 Click to lock recording to prevent it from being overwritten search for motion events in playback 1 In playback mode click the Smart icon E or click the Motion Search button in the Search menu The motion search view opens By default the central area of the view already has a motion detection zone marked 2 Inthe motion search view click one of the icons in the toolbar to mark the area in which the recorder needs to search for motion 44 TruVision DVR 44HD User Manual 3 4 5 6 T 6BChapter 7 Searching files 000000 Description Click to
80. ck again and select Stop Sequence to stop sequencing Live view toolbar The live view toolbar in live view lets you quickly access regularly used commands Position the cursor over a video image and left click the mouse The toolbar appears see Figure 16 on page 31 30 TruVision DVR 44HD User Manual 4BChapter 5 Live view Figure 8 Live view toolbar Table 9 Description of the live view toolbar icons Icon HEDDE s u DA TruVision DVR 44HD User Manual 31 Description Pause Freeze the live image of the selected camera Although the image pauses time and date information does not The system clock continues to run Start Manual Recording Start stop manual recording The icon is red when manual recording is enabled See Recording schedule on page 86 for information on setting up this function Instant Playback Playback the recorded video from the last five minutes If no recording is found then there was no recording made in the last five minutes Click the icon and select the desired camera Click OK See Modify the instant replay duration on page 88 For more information Audio On Enable Disable audio output The audio option must already have been setup in the Display menu Snapshot Capture a snapshot of a video image The image is saved on the unit See Slideshow of snapshots on page 44 for more information PTZ Control Enter PTZ control mode See Configuring PTZ settings on
81. ck to start and stop video clipping For audio press F1 and a numerical button to play the audio of the specified camera in live view In System Information mode get the DDNS URL In User Management mode pop up the Permission screen of a selected item in User Management gt User gt User Management Delete a selected item from USB flash drive Exit the virtual keypad F2 In live view mode all day playback and playback modes press to display or hide the time or control bar In PTZ mode stop all ongoing operations Select or deselect an item Enter a selected folder of the external storage device such as a USB flash drive used for archiving A In Live View mode select the main monitor B In Live View mode select the event monitor Display In multiview mode toggle through the various multiviews full quad 1 5 1 7 9 and 16 In HDD information mode and user management mode delete a selected item In PTZ mode delete a selected key point In Log Search mode display the details of a log file in Log Search result Seq In Live View mode start stop sequencing cameras on the current monitor 2 Front panel lock You can lock or unlock the front panel with a key It provides access to the HDDs 3 Menu and Search buttons Menu Enter exit the main menu Search Enter the advanced search menu 18 TruVision DVR 44HD User Manual Name 4 Playback buttons 5 IR receiver 6 PTZ buttons 7 Enter and arrows buttons 8 Archive
82. ctor on a typical TVR 44HD digital video recorder Details may vary for specific models Before powering up the recorder connect the cameras and a main monitor for basic operation Once all required connections are done enter the relevant data in the setup wizard see page 13 Note For every hardwired alarm input connect one wire to the input connection with the alarm number label and one wire to a Ground connection labeled G TruVision DVR 44HD User Manual 9 1BChapter 2 Physical installation Figure 1 TVR 44HD back panel connections 16 channel model shown D gt JV a ii Q 2 000 o ETE TELE LEL LIINIST IRTAT a re 09020202020 002020 DLoRoRkoVoVo Ro OR ORO ROS OS OCOCOS RS 32 CETELE seuexune p sesonon anojinnn DO oSbSosos 5050 o8o8hRoscsosasoposcsenG AOS OSO SO SOSO LOSOS 0000090000000009000000 J770 0809 N Ogy y HD ss o tome r O J DAOA _ Waaa a A I EN Rogogoconocos oroso amp amp amp Description Use Specification 1 One audio input Connect microphone for bi directional RCA jack 315 mV 40 kohms audio not recorded Unbalanced Line level audio requires amplification 2 One audio output Connect to speakers for audio output RCA jack 315mV 600 ohms Unbalanced Line level audio requires amplification 3 Line in Connect a microphone for bidirectional a
83. d 9 Inthe Archive window select from the drop down list the backup device to be used 10 Click Archive File downloading starts Note You can create a new folder for the video clips Press the New Folder button and enter the folder name Play back archived files on a PC Use the standard file player software TruVision Player to play back the archived video on your PC It is downloaded automatically from the recorder when archiving files onto a backup device Note that in some cases a limited file player is included in the recorder If so when opening the file player on your PC the software will prompt a message stating that a full version of the player is available for download from our website 52 TruVision DVR 44HD User Manual Chapter 9 Display settings Use the Display Settings menu to modify how the camera images appear on screen Display settings Use the Display Settings menu to adjust the settings related to the local monitor output of the recorder such as selecting the main and event monitors multiview layout display the monitor time bar sequence dwell time options and enable or disable the local audio output See Figure 17 below Figure 17 Display Settings window Standard 1280 1024 60HZ VGA HDMI ft No Switch H VGA HDMI 10 10 I ON n je O Table 11 Description of the Display setup window Option Description 1 Monitor Video Format The recorder can suppor
84. digital Zoom mode and return to full screen playback mode The playback control toolbar reappears Create bookmarks You can bookmark the important scenes in a recorded file for later reference Bookmarks flag the start of a scene Up to 64 bookmarks can be saved in a video file There are two types of bookmarks TruVision DVR 44HD User Manual 41 5BChapter 6 Playback functionality e Default bookmark A All default bookmarks have the same generic name BOOKMARK e Customized bookmark W The bookmark is given a name for easy identification The same name can be used for several bookmarks You can search both types To create a bookmark 1 Open a 24 hour playback window or the playback window from a search result 2 Inthe playback recording click the timeline bar where you want the bookmark to be The green time line jumps to this position Click the button for the type of bookmark you want and enter the bookmark name if required In the playback recording from a search click the scroll bar where you want the bookmark to be The scroll bar ball jumps to this position Click the button for the type of bookmark you want and enter the bookmark name if required The bookmark is saved 3 Click the bookmark management kad button to see the list of bookmarks saved The name of a bookmark can be edited The bookmark can also be deleted 42 TruVision DVR 44HD User Manual Chapter 7 searching files This chapter descri
85. e The default user name is guest The default password is 3333 Note The default passwords should be changed for security reasons Add a new user Only a system administrator can create a user You can add up to 16 new users To add new users 1 From the menu toolbar click User Management 2 Click Add to enter the Add User window TruVision DVR 44HD User Manual 111 15BChapter 16 User management 3 Enter the new user s name and password Both the user name and password can have up to 16 alphanumeric characters 4 Select the new user s access level Operator or Guest Default is Guest 5 Enter the user s MAC address to let the user access the recorder from a remote computer with this MAC address 6 Click OK to save the settings and return to the previous window 7 Define the users permissions Click the Permission button for the new user In the Permissions pop up window check the required access privileges for local remote and camera configuration See Customizing a user s access privileges below for the permission descriptions for each group Click Apply to save the settings and OK to return to the previous window 8 Click Exit to return to live view Customize a user s access privileges Only an administrator can allocate access privileges to Operator and Guest users The access privileges can be customized for each user s needs The administrator s access privileges cannot be changed
86. e Using the IR remote control on page 22 e KTD 405 keypad control See Appendix E KTD 405 keypad on page 141 for more information e TVK 800 keypad from TVK 800 firmware version 1 0i Please refer to the user manual for more information e Web browser control TruVision Navigator TVRmobile See Chapter 18 Using the web browser on page 121 for more information on using the web browser Please refer to the TruVision Navigator and TVRmobile user manuals for more information You can use your preferred control method for any procedure but in most cases we describe procedures using the mouse Optional control methods are given only when they differ substantially from the mouse control methods The front panel description The function buttons on the front panel control can be used to operate most but not all of the main functions of the recorder The LED indicators light up to alert you of various conditions The functions available can be limited by setting passwords See Figure 9 on page 18 for more information TruVision DVR 44HD User Manual 17 3BChapter 4 Operating instructions Figure 3 TVR 44HD front panel 8 channel model shown De a 0 PE p a DVR 44HD O The controls on the front panel include Table 2 Front Panel Elements Name Description 1 Display buttons See Table 3 on page 20 for a detailed description of all these buttons for different tasks F1 In Playback mode cli
87. e Mode Mode Quota Camera Analog 1 Used Record Capacity Used Snapshot Capacity HDD Capacity GB Max Record Capacity GB Max Snapshot Capacity GB S M A R T Use when the disk has failed to self evaluate No HDD No Self test Status Not Tested Self test Type Short Test S M A R T Temperature C Power Up days Self evaluation All evaluation Functional S M A R T Information ID Attribute Name Status Flags Threshold Value Worst Raw Value Bad Sector Detection HDD No Null HDD Capacity Null Block Capacity Null Status Null Error Count Null User Management Users User Management admin 1234 operator 4321 TruVision DVR 44HD User Manual 163 25BAppendix H Default menu settings System Information 164 Device Info Camera Record Alarm Inputs Alarm Outputs Network guest Null System Information Camera Record Alarm Inputs Alarm Outputs Network Device Name TVR 44HD Model Model number Serial No Model s serial number Firmware Version Encoding Version Camera No Camera Name Status Motion Detection Camera Tamper Video Loss Preview Camera No Recording Status Stream Type Frame Rate Bitrate Kbps Resolution Record Type Active Schedule No Alarm Name Alarm Type Alarm Status Triggered Camera No Alarm Name Alarm Status NIC IPv4 Address IPv4 Subnet Mask IPv4 Default Gateway IPv6 Address 1 I
88. e View Playback Device information Log Search Configuration Table 19 Description of remote configuration menus Menu Camera Setup Network Settings 128 Function Camera Recording Settings Snapshots Camera OSD Motion Detection Privacy Mask Camera Tamper Text Overlay Restricted Access Camera PTZ Setup V stream Encoding Network Settings PPPoE Description Define the general camera settings such as camera name stream record mode resolution frame rate audio recording and pre and post event times See Camera recording settings on page 59 for more information Define the image quality of snapshots See Snapshots on page 61 for further information Define which information is displayed on screen Only applied for analog cameras See Camera OSD on page 61 for further information Define motion detection parameters See Motion detection on page 63 for more information Define the on screen privacy mask areas See Privacy mask on page 68 for more information Define the video tampering detection settings See Camera tamper on page 69 for more information This function is only available via the browser See Text overlay on page 130 for further information Define the cameras whose images cannot be displayed by those not logged in See Restricted access camera on page 70 for more information Define the PTZ parameters such as preset
89. e overwrite function is enabled the maximum capacity for both recordings and snapshots Is set to zero by default 104 TruVision DVR 44HD User Manual 14BChapter 15 Storage management To set the HDD quota for a camera 1 From the menu toolbar click Storage Management gt Storage Mode HDD Information S M A R T Settings Bad Sector Detecton 4 Free Quota Space 931 GB Storage Management 2 Under the Mode option select Quota 3 Select a camera whose storage capacity you want to change and enter the values in GB for the maximum record capacity and snapshot capacities The available quota space available is displayed on screen 4 Click Apply to save the settings 5 If you want to copy these values to other cameras click Copy and select each camera individually Click OK Click Apply to save the settings Group HDDs Your recorder can organize multiple HDDs into groups Videos from specified channels can be set to be recorded onto a particular HDD group You could for example save the records from a couple of high priority cameras to one HDD and save the recordings from all the other cameras to another HDD To set up an HDD group 1 2 3 4 From the menu toolbar click Storage Management gt Storage Mode Under Mode select Group Under Record on HDD Group select a number for the HDD group Check the channels to be added to this group Note By default all channels belong to HDD group 1 Clic
90. e resolution of the recording Options include 1920 1080 1080P 1280 720 HD720P 960 576 960H 704 576 4CIF 640 480 VGA 352 288 CIF TruVision DVR 44HD User Manual 59 9BChapter 10 Camera setup Bitrate Type Select Variable default or Constant If Variable is selected the bandwidth can vary depending on video quality and the bandwidth required If Constant is selected the video streaming is always at the maximum bit rate selected Video Quality Select the quality at which to record If Constant is selected as the bit rate type this option is unavailable If a low video quality is selected the image quality is poorer and the bandwidth required is reduced thereby allowing recording over a longer period of time Frame Rate Select the recording frame rate Max Bitrate mode Select the general Default or customized option Max Bitrate kbps If the customized maximum bit rate mode was selected enter the value here It must be between 32 and 4096 kbps It is calculated from the frame rate and time required Default is 1792 Pre Event This is the time the camera starts recording before the event Select the time in seconds from the list to start pre recording before the event Default is 5 seconds The maximum pre recording times available depend on the constant bit rate See Maximum storage times in the appendix Post Event This is the time the camera continues to record after the event
91. e to block the view of a camera when overlooking residential premises This hidden area is referred to as privacy masking Privacy masking cannot be viewed in live view or recorded mode and appears as a black area on the video image Up to four privacy masks can be defined for one analog camera For IP cameras the amount of privacy masks is determined by the amount supported by the camera 68 TruVision DVR 44HD User Manual 9BChapter 10 Camera setup To setup a privacy mask 1 From the menu toolbar click Camera Setup gt Privacy Mask 2 Select the camera for which to set up privacy masking 3 Check the Enable Privacy Mask box to enable the feature 4 Setup the mask area Up to four areas can be set Using the mouse click and drag a privacy mask box in the camera view window over the desired area You can set up to four areas for privacy masking Masked areas are dimmed and outlined in four different colors Click Apply to save settings To delete a mask check the desired mask and click Clear for that color mask 5 To copy the settings to other cameras click Copy and select the desired cameras Click OK 6 Click Apply to save the settings and then click Exit to return to live view Camera tamper You can setup the recorder to alert you when the camera view has changed such as when someone has deliberately blocked the camera view by spraying paint on the lens or by moving the camera Tampering detection only applies whe
92. earch results list to the recorder system without modifying the camera configuration Search the network for available IP cameras Add an IP camera to the recorder system Upgrade IP camera software Insert USB flash drive in the recorder and select the upgrade file The camera will automatically reboot once the software is upgraded Delete the selected IP camera from the list Update the information displayed on a camera in the recorder device list To automatically add an IP camera 1 From the menu toolbar click Camera Setup gt IP Camera Status 2 Click Device Search Add to search for any supported IP cameras located in the recorder LAN 3 Check the boxes of the cameras that you want to add to the recorder 4 Click Add to add the selected cameras to the list of devices in the recorder Click Done when complete in order to return to the main window The cameras are added to the end of the list of devices 5 To test if a camera connection is operational select the desired camera from the list of devices connected to the recorder and click Live A pop up window should appear showing the camera s live view 58 TruVision DVR 44HD User Manual 9BChapter 10 Camera setup Note If cameras still have default settings they might have the same IP addresses This creates an IP conflict Use the Edit button to assign a different IP address to each camera Ensure that for each camera to successfully connect the cameras To man
93. ee Table 1 on page 7 for the list of default user names and passwords Go to Chapter 16 User management on page 111 for further information 6 TruVision DVR 44HD User Manual OBChapter 1 Product introduction Table 1 Default user names and passwords User Description Administrator There can only be one administrator The user name is admin The name cannot be modified The default password is 1234 Operator The default user name is operator The default password is 2222 Guest The default user name is guest The default password is 3333 Note The default passwords should be changed for security reasons Default network settings The network settings are e IP address 192 168 1 82 e Subnet mask 255 255 255 0 e Gateway address 192 168 1 1 e Ports When using the browser When using TruNav RTSP port 554 RTSP port 554 HTTP port 80 Server Client software port 8000 Go to Using the web browser on page 121 for further information TruVision DVR 44HD User Manual 7 Chapter 2 Physical installation This section describes how to install the recorder Installation environment When installing your product consider these factors e Ventilation e Temperature e Moisture e Chassis load Ventilation Do not block any ventilation openings Install in accordance with the manufacturer s instructions Ensure that the location planned for the installation of the unit is well ventilated
94. efault settings To restore parameters to default factory settings 1 From the menu toolbar click Device Management gt Configuration Files Note Only the administrator can restore the default settings 2 To restore all parameters to default factory settings Click the Default button Enter the Admin password click OK and then click Yes to confirm that you want to restore all parameters to default r To restore all parameters except network settings to default factory settings TruVision DVR 44HD User Manual 99 13BChapter 14 Device management Click the Restore button Enter the Admin password click OK and then click Yes to confirm that you want to restore all parameters except network settings to default 3 Click OK to confirm you want to restore default settings Upgrade system firmware The firmware on the recorder can be updated using three methods e Via a USB device e Via the recorder web browser e Using TruVision Navigator For further information refer to the TruVision Navigator user manual The firmware upgrade file is labeled TVR44HD dav To update the system firmware using a USB device 1 Download the latest firmware from our web site at www interlogix com Or www utcfssecurityproductspages eu videoupgrades 2 Connect the USB device to the recorder 3 From the menu toolbar click Device Management gt Upgrade Firmware The list of files on the USB is displayed 4 Select the firmware file and cl
95. el appears 2 Scroll the toolbar to Tour and double click the desired preset tour from the list The camera immediately carries out the preset tour movement To call up a shadow tour 1 In live view left click the mouse and select the PTZ Control icon in the live view toolbar The PTZ control panel appears Select the desired camera from the toolbar Or On the front panel select the desired camera and press Enter to call up the live view toolbar The PTZ control panel appears 2 Scroll the toolbar to Shadow Tour and double click the shadow tour from the list The camera immediately carries out the shadow tour movement 34 TruVision DVR 44HD User Manual Chapter 6 Playback functionality The recorder lets you quickly locate and play back recorded video There are four ways to play back video e Instant playback of the most recently recorded video e 24 hour playback of one day s recorded video e Search video by specific time events motion detection bookmarks or snapshots see Chapter 7 Searching files on page 43 for further information The recorder continues to record the live view from a camera while simultaneously playing back video on that camera display You must have the access privilege to play back recordings see Customize a user s access privileges on page 112 for more information Overview of the playback view It is easy to manage playback from the playback window The playback video ca
96. en The line crossing direction can be set as unidirectional or bidirectional Unidirectional is crossing the line from left to right or from right to left Bidirectional is crossing the line from both directions If you want to change a drawn line you must delete it and then redraw it However when using the browser you can move and rotate the line to the new desired position A series of linkage methods can be triggered if an object is detected crossing the line Figure 21 Line crossing detection window 64 a A ED Analog Camera Over IP Camera Status Analog 8 Line Crossing Detection Camera Recording Enable Snapshots Settings Camera OSD Line Image Direction Motion Detection sensitivity ixj Privacy Mask Camera Tamper Restricted Access C PTZ Setup PTZ Presets Tours V stream Encoding Restore Camera Setup TruVision DVR 44HD User Manual 9BChapter 10 Camera setup To define line crossing detection 1 2 3 4 10 From the menu toolbar click Camera Setup gt VCA SMD gt VCA Select the camera to detect line crossing motion Each camera must be set up individually Under Type select Line Crossing Detection and check Enable Under Line select the desired line number You can configure up to four different lines for a camera Under Detection select the motion direction as A lt gt B A gt B or B gt A from the drop down menu 3 A lt gt B Whe
97. en the HDDs are full 1 From the menu toolbar click Storage Management gt HDD Information 2 Enable Overwrite Caution If the overwrite option is disabled and the quota management capacity for a channel is set to zero the recordings on that channel can still be overwritten To avoid this happening set a quota level for the channel or use the group management mode 3 Click Apply to save the settings 4 Continue to configure the recorder or click Exit to return to live view Managing eSATA If you are using an external eSATA device connected to the recorder you can configure the eSATA to record capture or export video Select the Export option when using the eSATA as a backup See Quick Archive on page 49 for further information select the Record Capture option to record and capture video Information on the eSATA for this purpose can be seen under System settings gt Hard Disk gt HDD Information To set up the e SATA device 1 From the menu toolbar click Storage Management gt HDD Information 2 Under eSATA select the desired eSATA 3 Under eSATA select the Record Capture or Archive 4 Click Apply to save the settings Storage mode To ensure an efficient use of the storage space available on HDDs you can control an individual camera s storage capacity using HDD quota management This function lets you allocate different storage capacities for both recordings and snapshots to each camera Note If th
98. er All Video Loss Alarm Illegal Login HDD Full HDD Error Duplicate IP Address Found Network Disconnected Abnormal Record IP Camera Disconnected IP Camera Address Conflicted Input Output Video Standard Mismatch Record Buffer Overflow Input recording Resolution Mismatch IP Camera Motion Analysis Exception All Power Up Local Shutdown Abnormal Shutdown Watchdog Reboot Local Restart Local Login Local Logout Local Configure Parameters Local Upgrade Local Start Manual Recording Local Stop Manual Recording Local PTZ Control Local Lock File Local Unlock File Local Trigger Alarm Output Local Initialize HDD Local Add IP Camera Local Delete IP Camera Local Set IP Camera Local Upgrade IP Camera Firmware Local Playback by File Local Playback by Time Local Playback by Snapshot file Local Export Config File Local Import Config File Quick Snapshot Playback Snapshot Local Restore Admin s Password Local Operate Bookmark Local Switch Output Local HDD Detect Local Delete HDD Local Restore Device Parameters Remote Shutdown Remote Reboot Remote Login Remote Logout Remote Configure Parameters Remote Upgrade Remote Start Manual Recording Remote Stop Manual Recording Remote PTZ Control Remote Lock File Remote Unlock File Remote Trigger Alarm Output Remote Initialize HDD Remote Add IP Camera Remote Delete IP Camera Remote Upgrade IP Camera Firmware Remote Playback by File
99. er Play Details MIA MIA MA MIA MIA MA MIA MA MA M A MIA 7 9a ooganaa gg 4 Search 119 16BChapter 17 System information Details Displays information on the log or recording For a recording it lists such information as start time type of event local user host IP address parameter type camera number and gives a description on the types of events recorded and when record time was stopped Play Click to start playback of the selected recording Export Click to archive the selected file to a USB device The export window appears 7 Click Exit to return to live view 120 TruVision DVR 44HD User Manual Chapter 18 Using the web browser This chapter describes how you can use the web browser interface to configure the device play back recorded video search through event logs and control a PTZ dome camera You can also specify settings on the web browser interface to optimize video playback and recording performance when operating in a low or limited bandwidth environment Many of the browser configurations are similar to those done locally Windows 7 and Windows 8 users Internet Explorer for Windows 7 and Windows 8 operating systems have increased security measures to protect your PC from any malicious software being installed When using the recorder web browser interface you can install ActiveX controls to connect and view video using Internet Explorer To have complete functionality of the web brows
100. er interface and the recorder player with Windows 7 and Windows 8 do the following e Run the Browser interface and the recorder player application as an administrator in your workstation e Add the recorder s IP address to your browser s list of trusted sites To add the recorder s IP address to Internet Explorer s list of trusted sites Open Internet Explorer Click Tools and then Internet Options Click the Security tab and then select the Trusted Sites icon Click Sites Enter the IP address or DDNS name in the Add this website to the zone field Click Add and then click Close 2 3 4 5 Clear the Require server verification https for all sites in this zone box 6 7 8 Click OK in the Internet Options dialog box 9 Connect to the recorder for full browser functionality TruVision DVR 44HD User Manual 121 17BChapter 18 Using the web browser Access the web browser To access the recorder open the Microsoft Internet Explorer web browser and enter the IP address assigned to the recorder as a web address On the logon window enter the default user ID and password Note Only one recorder can be viewed per browser User ID admin Password 1234 The default values for recorder network settings are e IP address 192 168 1 82 e Subnet mask 255 255 255 0 e Gateway address 192 168 1 1 e Server port 8000 e Ports When using the browser When using TruNav RTSP port 554 RTSP po
101. etup 3 Click Apply to save the settings 4 Click Exit to leave the menu setup and return to live view The soft keyboard A keyboard will appear on screen when you need to enter characters in a window option Click a key to input that character Figure 6 The soft keyboard ESC 123 4 5 67 8 9 0 CF WERTYU TO P ASDFGHJKL ZXCVBNM lt lt EETRI PEE Enter Description of the keys in the soft keyboard a Switch to lowercase uppercase Space Exit the soft keyboard Alphanumeric characters Backspace G Confirm selection Exiting the main menu Punctuation Press the Menu button on the front panel to exit the current menu window and return to live view or click Exit in a main menu 26 TruVision DVR 44HD User Manual Chapter 5 Live view Description of live view Live view mode is the normal operating mode of the unit where you watch live images from the cameras The recorder automatically enters into live view mode once powered up On the monitor you can see whether a recording is in progress and if set up to do so the current date and time as well as the camera name Status information Information on the system and camera status is displayed as icons on the main and auxiliary monitors The camera status icons are shown for each camera Each icon represents information on a specific item These icons include Table 6 Description of the on screen icons Status Icon Description Indicates an
102. eturn the sensitivity percentage and time threshold values to default To set a region click gt l The cursor changes to a pen symbol Click where you want the region to start on screen and click two other points of the desired region A blue quadrilateral region appears on screen Click to select the full screen Note Click E to delete the line Specify the channels triggered when a line crossing detection alarm is triggered Click Settings gt Trigger Channel and check the cameras that will start recording Click Apply and OK Specify the schedule during which a line crossing detection alarm can be triggered Click Settings gt Arming Schedule Select the day of the week and the time Specify the action when a line crossing detection alarm is triggered Click Settings gt Actions and check one or more response methods TruVision DVR 44HD User Manual 67 9BChapter 10 Camera setup Full screen Monitoring When an alarm is triggered the monitor VGA or HDMI displays an image in live view mode For alarms that are triggered simultaneously images display one at a time every 10 seconds default dwell time Change the desired sequence dwell time under Display Settings gt Disloay gt Sequence Dwell Time When the alarm stops cycling of the images stops and you return to live view mode Enable Alarm Audio Trigger an audible beep when a line crossing detection alarm is detected Notify Alarm Host Send an exception or alarm signal
103. ew formats The number of multiview display modes available depends on the recorder model Single view display Press the numeric button on the front panel to switch to the corresponding camera format display For example press button 10 to view camera 10 Or Right click the mouse and select Single Camera from the menu Select the required camera from the list Multiple view display Press the Display button on the front panel to cycle through different display formats format Or Right click the mouse and select Multi Camera from the menu Select the desired multiview display layout Sequencing cameras The sequencing feature allows a camera to be displayed briefly on screen before advancing to the next camera in the sequence list Sequencing can only be done in single view display mode The default sequence displays each camera in numerical order However each camera on the main and event monitors can have a pre programmed dwell time and sequence order See Layout on page 54 for more information Note Dwell time must not be set to zero for sequencing to function Sequencing cameras using the front panel Select the camera where you want to start sequencing Press the Seq button on the front panel to start sequencing Press it again to stop sequencing Sequencing cameras using the mouse Select the camera where you want to start sequencing Right click the mouse and select Start Sequence to start the sequencing Right cli
104. fer please contact your Network Administrator or ISP to see if your recorder requires specific IP addresses or port numbers To configure general network settings 1 From the menu toolbar click Network Settings gt Network Settings 76 TruVision DVR 44HD User Manual PPPOL NIC Type DDNS Enable DHC NIP 99000 Email FTP MAC SNMP Server Port UPnP Multicast IP 50 9090 Net Detect Network Statistics Network Settings IPv4 Addres IPv4 Subnet M IPv4 Default Addre lt lt Preferred DN Enable Telnet 10BChapter 11 Network settings 10M 100M 1000M Self adaptive pi 5 192 168 1 82 255 255 255 0 G 192 168 1 1 c0 56 e3 40 cd 33 IPv6 Address 1 fe80 c 56 e3ff fe40 cd33 64 IPv6 Address 2 IPv6 Default C MTU Bytes Alternate DNS HTTP Port RTSP Service 80 554 204800 Total Bandwid 2 Enter the required settings Option 1 NIC Type 2 Enable DHCP 3 IPv4 Address 4 IPv4 Subnet Mask 5 IPv4 Default Gateway 6 MAC Address 7 Preferred DNS Server 8 Server Port TruVision DVR 44HD User Manual Description Network interface card NIC is a device used to connect the recorder to a network Select the NIC type used from the drop down list Default value is 10 100M self adaptive for the 4 channel recorder and 10 100 1000M self adaptive for the 8 or 16 channel recorders DHCP Dynamic Host Configuration Protocol is a protocol for assigning an
105. g into the keypad using the Admin password Hold down the Enter button until a beep sounds and then enter the following code 1 4 7 6 Push the seq button to confirm 142 TruVision DVR 44HD User Manual 22BAppendix E KTD 405 keypad 2 Scroll through the menus with the button until this menu appears OPERATING MODE DIGIPLEX 3 Change Operating Mode to Zone by moving the joystick down 4 Quit the menu by pressing the seq button The display will show for example ZONE Z0HE TITLE CAMERA MONITOR 5 To connect it to the recorder press the zone button and enter the ID number of the recorder The default value is 1 6 To configure the recorder zone ID number at the recorder enter the Monitor screen by selecting Display Mode Settings in the main menu and select Monitor Under Zone ID enter the zone ID value The default value is 1 Note The zone ID value must be identical for the recorder and keypad The recorder is now connected to the KT D 405 keypad Recorder and keypad functions The KTD 405U acts as a recorder control keypad when connected to the recorder The keypad mimics many of the functions available from the front panel of the recorder Unavailable recorder functions The following recorder functions are unavailable when using the keypad to control the recorder e Export video e Shadow tour e Select motion detection or tampering zones e Archive records e Capture video If these f
106. gs To check network delay and packet loss 1 From the menu toolbar click Network Settings gt Net Detect 2 Under the section Network Delay Packet Loss Test select the NIC to use and enter the destination address Click Test The test result appears in a pop up window 3 If you need to check the current network parameters click the Network button to get an overview The current values for NIC type DHCP IPv4 address IPv4 subnet mask IPv4 default gateway are shown as well as the preferred DNS server and alternate DNS server if used The NIC Type and Enable DHCP options can be changed Click Apply to save any changes made and then click OK to return to the main window 4 Click Exit to return to live view To check network status 1 When all the network parameters have been set click the Status button to confirm that all parameters are operating correctly 84 TruVision DVR 44HD User Manual Network settings Export network packet data When the recorder is connected to a network you can export the captured data packet to a USB flash drive SATA eSATA CD RW and other local backup devices To export network packet data 1 From the menu toolbar click Network Settings gt Net Detect 2 Under the section Network Packet Archive click Refresh to get a list of the local backup devices available Select one from the list 3 Click Export Up to 1M of data can be exported at a time 4 Click Exit to
107. he Admin Password edit box Click the box to display the virtual keyboard and enter the default admin password 1234 Front panel or remote control Navigate to the Admin Password edit box using the navigation buttons Press Enter on the front panel or remote control to display the virtual keyboard Enter the default admin password 1234 Admin Password New Admin Password B New Pa Confirm No User Name Level User s MAC Address admir 2 operator Operator 00 00 00 00 00 00 I t lt User Name Password Confirm Level Guest User s MAC Address 00 00 00 00 00 00 Add Previous Cancel Note You must enter an admin password To change the Admin password check New Admin password and enter the new password and confirm it TruVision DVR 44HD User Manual 13 2BChapter 3 Getting started Caution It is strongly recommended that you change the password of the administrator Do not leave 1234 as the default password Write it down in a safe place so that you do not forget it If you should forget the password to your recorder contact your supplier with the serial number of your recorder to obtain a secure code to reset it Click Next Time and date configuration Select the desired time zone date format system time and system date If Daylight saving time DST is required check Enable DST and enter the desired summer and winter times GMT 08 00 Pacific Time U S amp Canada MM DD YYYY 12 hour 03 06 2015
108. he boxes of the cameras that you want to enable Uncheck those you want to disable in order to add an IP camera Click Apply to save the changes A pop up message will appear asking if you want to reboot the system Click Yes IP camera status The IP camera status menu allows you to add edit and remove cameras to the recorder as well as update the cameras firmware The maximum number of IP cameras that can be connected depends on the number of analog cameras enabled You may need to disable an analog camera to add an IP camera TruVision DVR 44HD User Manual 57 9BChapter 10 Camera setup Figure 20 IP camera window Analog Camera Over fer Status Edit Adva Live Camera Name IP Camera Addr Manage Port Protocol Device M a amp Camera Recording Snapshots a Camera OSD Image Motion Detection VCA SMD Privacy Mask Camera Tamper Restricted Access C PTZ Setup PTZ Presets Tours V stream Encoding 2 E o 4 Manual Add Device Search Upgrade Camera Setup Table 12 Description of the IP camera window Option Description This shows the list of IP cameras added to the recorder The camera information shown is Camera No Status Edit Advanced Set Live View Camera Name IP Camera Address Manage Port Protocol Device Model Serial Number and Firmware 1 IP camera list 2 Manual Add 3 Device Search Add 4 Upgrade 5 Delete 6 Refresh Add the selected cameras from the s
109. he manual recording If a scheduled recording is already in progress when a manual recording is started it continues to record as scheduled You can check to see if a camera is recording manually by looking at the icon on the live view toolbar The icon is red when manually recording Default is off There are two ways to start and stop a manual recording e Use the live view toolbar You can start stop manual recording for each camera individually Position the cursor over a camera image and left click the mouse to display the live view toolbar Click the manual record icon to start or stop manual recording The icon is red when recording e Use the configuration menu This option lets you select more than one camera at a time Go to Recording gt Manual Recording to access the manual recording menu and check the boxes of the cameras to start or stop manual recording Recording gt chedule General Analog TruVision DVR 44HD User Manual 89 Chapter 13 Alarm and event setup This chapter describes the alarm and event setup menu and provides more information on the different types of alarms and connected responses Set up alarm inputs The recorder can be configured to record when an alarm is triggered by an external alarm device for example PIR detector dry contacts To set up external alarms 1 90 From the menu toolbar click Alarm amp Event Setup gt Alarm Input Alarm Output Manual Trigger Buzzer
110. hen triggered 90 F Factory default settings restore 99 Firmware update 100 Frame by frame playback 41 Front panel button functions by task 20 Front panel description 18 Front panel lock 99 FTP server settings 82 H HDD checking status 103 grouping 105 initializing 103 install remove 108 properties 106 Holiday schedules recording 100 Import configuration settings 99 Instant playback 38 IP camera TruVision DVR 44HD User Manual status 57 supported 56 K KTD 405 keypad accessing recorder functions 144 connecting the keypad to the recorder 148 controlling a camera 147 firmware supported 141 set up in zone mode 142 set up recorderdevice address 142 wiring 141 L Language change GUI language 98 Line crossing detection 64 Live mode configuring time and date display 96 Live view mode digital zoom 32 Live view toolbar 30 Login password 98 Main menu accessing 24 description 24 icon descriptions 24 Manual recording 89 Menu timeout change time 98 Monitors change output mode 98 connecting 11 video outputs 28 Motion detection 63 Mouse pointer speed change 98 Mouse pop up menu 28 N NAS add 109 Network packet data exporting 85 Network settings general set up 76 Network settings for browser 122 Network status 83 Network traffic checking 83 Notifications alarm types 93 external alarms 90 NTP server 80 TruVision DVR 44HD User Manual
111. ick Upgrade Click Yes to begin the upgrade process 5 When the upgrade process is completed reboot the recorder The recorder does not reboot automatically Holiday schedules lt is possible to indicate holidays for which you can create a separate recording schedule Once one or more holidays are created a separate entry for holiday will be included in the recording schedule refer to Recording schedule on page 86 of the manual To set up a holiday recording schedule 1 From the menu toolbar click Device Management gt Holiday 2 Select a holiday period from the list and click its Edit button to modify the settings The Edit window appears 3 Enter the name of the holiday period and click Enable 100 TruVision DVR 44HD User Manual 13BChapter 14 Device management 4 Select whether the holiday period will be categorized by date week or month and then enter the start and end dates 5 Click Apply to save the settings and then OK to return to the Edit window 6 Repeat steps 2 to 5 for other holiday periods 7 Click Exit to return to live view Text insertion Text insertion lets you insert or display text from a point of sale POS automated teller machine ATM or other systems on the video display of the recorder The text is saved and time stamped together with the video You can then search the text for specific video clips The text is can be enabled or disabled during live view and playback The recorder
112. in the search result screen Change playback speed 146 Keypad action Press 0 to 9 and then press Enter Press view and then press button 5 to scroll through the next available multiview screen Press the seq button to scroll through the cameras in full screen Move the joystick to the right next camera or the left previous camera _ Press the mon button and button 1 to switch to monitor A Press the mon button and button 2 to switch to monitor B Press Alarm In live view mode press Enter Move the joystick to move the dome up down left and right Press zoom and zoom Press eSc Press Press when in full screen Press to stop playback and return to live view mode Press to pause playback Press to restart Press enter and move the joystick to the desired file Press to start playback Press and hold esc and then press the left right arrow buttons or move the joystick to the left right Further information Using the numeric buttons 0 to 9 enter the number of the camera and then press Enter H It is possible that you first need to loin before you can access the PTZ mode KTD 405U Turn the knob on the joystick to zoom in zoom out KTD 405 2DU Press the zoom and zoom buttons Once password is entered the Advanced Search menu appears 24 hour playback of the currently selected camera TruVision DVR 44HD Use
113. ingle camera view then it will also be the top left camera of the 4 channel view You can switch the channel of a camera with that of another camera in the system This lets you for example have the images of camera 1 appear on channel 10 and the images of camera 10 appear on channel 1 This feature is useful when you want to watch the sequence of images from specific cameras so that they are next to each other on screen See Figure 18 below Each video tile displays both the order of the camera on screen and the camera number Figure 18 Camera layout window Multiview layout selection bar Camera order in the sequence Camera number selection TruVision DVR 44HD User Manual 55 Chapter 10 Camera setup Use the Camera Setup menu to configure analog and IP cameras You can also configure the camera OSD snapshots recording settings motion detection privacy masking camera tampering PTZ configurations and V stream settings Note Not all settings are available for IP cameras For advanced IP camera settings please consult the IP camera web browser interface Supported IP cameras The recorder supports the following IP cameras e HD TVI technology cameras HD and Full HD e Standard analog cameras e TruVision IP cameras at HD and full HD resolution Analog camera setup The recorder can support up to 16 cameras depending on the model which can be a mix of analog and IP cameras By default all camera channels in the
114. interlogix Be TruVision DVR 44HD User Manual P N 1072968 EN REV A ISS 16APR15 Copyright Trademarks and patents Manufacturer FCC compliance Canada ACMA compliance Certification EU directives Contact information 2015 United Technologies Corporation All rights reserved Interlogix is part of UTC Building amp Industrial Systems a unit of United Technologies Corporation All rights reserved Trade names used in this document may be trademarks or registered trademarks of the manufacturers or vendors of the respective products Interlogix 2955 Red Hill Avenue Costa Mesa CA 92626 5923 USA Authorized EU manufacturing representative UTC Fire amp Security B V Kelvinstraat 7 6003 DH Weert The Netherlands Class A This equipment has been tested and found to comply with the limits for a Class A digital device pursuant to part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instruction manual may cause harmful interference to radio communications Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense This Class A digital apparatus c
115. ion of a HDD To enable HDD sleep mode 1 From the menu toolbar click Storage Management gt Storage Mode 2 Check Enable HDD Sleeping to enable sleep mode Default is Enable 3 Click Apply to save the settings 4 Continue to configure the recorder or click Exit to return to live view S M A R T settings S M A R T Self Monitoring Analysis and Reporting Technology reports on a variety of hard drive attributes It helps ensure that the HDD is functioning properly at all times while protecting video stored on the hard drive 106 TruVision DVR 44HD User Manual 14BChapter 15 Storage management To view the S M A R T information of a HDD 1 From the menu toolbar click Storage Management gt S M A R T Settings 2 Select the HDD whose data you want to see A detail listing of S M A R T information is displayed HDD Informabon Storage Mode Bi WUse when the disk has failed to sell evalvate 1 Not tested Short Pest Bad Sector Detection 41 Pass Functional SMART Information ID Attribute Mame Status Threshold Raw Value 0x3 Spin Up Time ORK z 2 331 r StartfStop Count OK ew Heallocated Sector Count URK Ox T Seek Error Rate OK Oxo Power on Hours Count OK Oma Spin Up Retry Count OK Osh Calibration Retry Count R Uwt Power Cycle Count OK Oecd Power Off Retract Count OK Onc 7 Load Unload Cycle Count OK c Power lemperature K Urca Reallocathon Event Count OK Oecd Curent Pending Sector Count OK O
116. ious window e Using the front panel 1 Select the camera for playback and press the Play button Playback from the selected camera starts immediately Note Synchronous playback is only available using the mouse If live view was showing multiview only the camera in the top left channel on screen will be played back 2 To select a different camera for playback press the numerical button of the desired camera 3 Press Live to return to live view Playback speed and skip time Use the direction buttons on the front panel to modify the playback speed and to jump forwards or backwards The default skip time is 30 seconds However you can easily change it To set the playback skip time 1 In playback mode right click the mouse and click Skip Time on the pop up menu The Skip Time menu appears 2 Select a skip time between 10 and 300 seconds The default skip time is 30 seconds To change the playback speed From the front panel Press the left and right buttons to speed up and slow down recorded video From the playback window using the mouse Click Ed and E to speed up and slow down recorded video To skip forwards or backwards during playback From the front panel Press the up and down buttons to jump recorded video forwards and backwards by a set skip time From the playback window using the mouse Click M and Hl to jump recorded video forwards and backwards by a set skip time Click a location on the
117. is 60 minutes e NTP Server IP address of the NIP server e NTP Port Port of the NTP server 80 TruVision DVR 44HD User Manual 10BChapter 11 Network settings 4 Click Apply to save the settings and click Exit to return to live view E mail settings The recorder can send email notifications of alarms or notifications through the network Note Ensure that the DNS address has been set up correctly beforehand To configure email settings 1 From the menu toolbar click Network Settings gt Email 2 Enter the required settings 4 Option Enable Server Authentication User Name Password SMTP Server SMTP Port Enable SSL Sender Sender s Address Select Receivers Receiver Name Receiver s Address Include Snapshot Interval Description Check the box if your mail server requires authentication and enter the login user name and password If the mail server requires authentication enter the login user name If the mail server requires authentication enter the login password Enter the SMTP server s IP address Enter the SMTP port The default TCP IP port for SMTP is 25 Check the box to enable SSL if it is required by the SMTP server This feature is optional Enter the name of the sender of the email Enter the sender s email address Select an email recipient Up to three receivers can be selected Enter the name of the receiver of the email Enter the email address of the receiver
118. ive and negative poles are correctly placed 3 Replace the battery cover TruVision DVR 44HD User Manual 23 3BChapter 4 Operating instructions Troubleshooting the remote control lf the IR remote control is not functioning properly perform the following tests e Check the battery polarity e Check the remaining charge in the batteries e Check that the IR remote control sensor is not masked If the problem still exists please contact your administrator Menu overview The recorder has an intuitive structure that allows you to configure the unit s parameters quickly and efficiently Each command icon displays a window that lets you edit a group of settings Most menus are available only to system administrators The window is divided into three sections The currently selected command icon and submenu item are highlighted in green See Figure 12 below You must be in live view mode to access the main menu Figure 5 Menu structure lime amp Date Settings ngua English E Miami IVE 44HD Configuration Files Upgrade Firmnmwane Holiday ext Insertion RS 23 Settings D Device Management 1 Menu toolbar Setup options available for the selected menu function Move the mouse over a command icon and click to select it See Table 5 below for a description of the icons 2 Submenu panel Submenus for the selected menu function are displayed Click an item to select it 3 Setup menu All
119. k Apply to save the settings Continue to configure the recorder or click Exit to return to live view TruVision DVR 44HD User Manual 105 14BChapter 15 Storage management Create HDD groups If you have more than one HDD installed you can change the behavior of a HDD by changing its property It can be set to read only or read write R W The storage mode must be set to Group before setting the HDD property A HDD can be set to read only to avoid important recorded files from being overwritten when the HDD becomes full To change a HDD status property 1 From the menu toolbar click Storage Management gt HDD Information 2 Select the HDD whose property you want to change 3 Click the Edit icon Ld The Local HDD Settings window appears Note The Edit icon is only available if there are at least two HDDs installed 4 Click the desired HDD property for the selected HDD R W or Read Only 5 Click the group number for this HDD 6 Click Apply to save and exit the window Note Once set to read only the HDD cannot be used to save recorded files until it is set back to read write R W If the HDD that is currently being written to is set to read only the data is then recorded to the next HDD If there is only one HDD present setting it to read only means the recorder cannot record Set up HDD sleep mode You can set the HDD to enter standby mode or sleep mode after a period of inactivity Sleep mode decreases the power consumpt
120. k the Constant Recording checkbox for the recorder to record continuously all day If left unchecked the recorder will not record Check the desired time lapse check box TL Hi or TL Lo To record motion detection events check Event Motion To record alarm events check Alarm Click Next to move to the next page or Previous to return to the previous page Note You can configure the recording parameters of each individual camera for the different recording schedules in the recording menu 9 When all the required changes have been entered a Summary page appears showing all the settings TruVision DVR 44HD User Manual 15 2BChapter 3 Getting started item Status Date Format MM DD YYYY Time Format 24 hour System Date 10 22 2014 System Time 09 26 28 Enable DST Y From Mar 2nd Sun 2 00 To Oct last Sun 2 00 DST Bias 60 Minutes NIC Type 10M 100M Self adaptive Enable DHCP N IPv4 Address 192 168 1 82 2 3 4 9 6 7 8 9 b b ab N O Previous Finish Cancel Click Finish to exit the Wizard The recorder is now ready to use For a description of the recorder main menu see Menu overview on page 24 16 TruVision DVR 44HD User Manual Chapter 4 Operating instructions Controling the recorder There are several ways to control the recorder e Front panel control See The front panel description below e Mouse control See Using the mouse on page 21 e IR remote control Se
121. le DST From To DST Bias TruVision DVR 44HD User Manual Description Select a time zone from the list Select the date format from the drop down list Default format is DD MM YYYY Select either the 12 hour or 24 hour time format from the list Default format is 24 hour format Check to display the day of the week in the monitor time bar Check the box to enable disable Default is Disable Enter the system date Default date is the current date Enter the system time Default time is the current time Enable to activate DST is automatically It depends on the time zone selected Default is Disable Manually define DST If this option is selected the Auto DST adjustment option is disabled Default is Disable Click the check box to enable or disable daylight savings time DST Enter the start date and time for daylight savings Enter the end date and time for daylight savings Set the amount of time to move DST forward from the standard time Default is 60 minutes 97 13BChapter 14 Device management General recorder settings Use the this menu of Device Management to configure general recorder options See Figure 29 and Table 14 on page 98 for the general options available The changes are immediately implemented once Apply is clicked to save the settings Figure 29 General settings of the recorder Language English 2 Device Name TVR 44HD Remote Control ID 255 Upgrade Firmware Keypad Zone ID 1
122. le map There are eight days to select Sunday Sun Monday Mon Tuesday Tue Wednesday Wed Thursday Thu Friday Fri Saturday Sat and and Holiday if enabled 4 Recording type There are five types of recording to select which are color coded e TL Hi Dark green High quality time lapse Records high quality video 86 TruVision DVR 44HD User Manual 11BChapter 12 Recording e TL Lo Bright green Low quality time lapse Records low quality video This could be used for example for night recordings when few events or alarms are expected Saving the video in low quality helps save resources on the HDD e Event Yellow Records only events such as motion detection and POS ATM text insertion e Alarm Red Records only alarms e None Grey No recording during this period Edit button Click to modify schedules and to copy schedules to other days of the week Timeline There is a 24 hour time line for each day Up to eight recording periods can be scheduled during the 24 hour period Copy button Click to copy schedules between cameras Define a schedule from the recording schedule window To set up a daily recording schedule 1 2 3 4 5 Select a camera Check the Enable Recording box to indicate that video from this camera is to be recorded Click a record type in the legend to activate that record type The cursor changes to a pen Drag the pen cursor across desired hours and days in the s
123. mera from the drop down list Click OK Playback starts immediately The Instant Playback scroll bar appears under the selected camera 3 Click Pause M on the toolbar to pause playback Click Play D to restart playback Click Stop Ed to stop playback and return to live view 24 hour playback Use this option to access one day of video recordings for the selected camera Playback starts at midnight and runs for the 24 hour period 24 hour playback is shown in full screen view See Figure 13 on page 38 for a description of the playback control toolbar e Using the mouse 1 In live view mode right click the mouse on the desired camera image In the mouse toolbar click 24 hour Playback The playback screen appears By default the camera is in full screen mode To select more than one camera for synchronous playback or to select playback from a different day move the mouse to the right edge of the screen The camera list and calendar appear Check the desired cameras and or another day Up to 8 cameras can be selected Playback starts immediately you have selected the camera and times Note A message appears if there are no recordings found during this period TruVision DVR 44HD User Manual 39 5BChapter 6 Playback functionality 3 Use the playback control toolbar to manually control playback 4 Click Exit El to return to live view O Right click the mouse and click Exit from the mouse menu to return to the prev
124. mote control see Triggering or clearing alarm outputs manually below 4 Select the recording schedules for the alarm output Click the Actions button and select the day of the week and the time periods during the day when motion can be recorded You can schedule up to eight time periods in a day Default is 24 hours Click Apply to save the settings Click Copy to copy the settings to other days of the week and holiday period Note The time periods defined cannot overlap 5 Click OK to return to the alarm output window 6 Click Copy to copy these settings to other cameras if required and then click Apply to save the changes 7 Click Exit to return to live view Manual trigger The manual trigger menu allows you to manually trigger outputs of the recorder To trigger or clear alarm outputs manually 1 From the menu toolbar click Alarm amp Event Setup gt Manual Trigger 2 Select the desired alarm output and click the following buttons Trigger Clear Trigger an alarm output or stop an alarm output As there is only one alarm output available the Trigger All button just triggers the one output Clear All Stop all alarm outputs at once 3 Click Exit to return to live view The alarm is silenced E Or a Press the Alarm button on the front panel or remote control The alarm is silenced Buzzer settings When an alarm is triggered by the system or a camera the recorder can be set up to respond with
125. n an object moves across the pre defined line in both directions it is detected and an alarm is triggered A gt B Only an object crossing the pre defined line from the A to the B side can be detected and trigger an alarm B gt A Only an object crossing the pre defined line from the B to the A side can be detected and trigger an alarm Set the sensitivity level between 1 and 100 Default is 50 Note Click Restore to return the value to default To set a line click N The cursor changes to a pen symbol Click where you want the line to start on screen and click again where you want the line to stop A blue line appears on screen Note Click E to delete the line Specify the channels triggered when a line crossing detection alarm is triggered Click Settings gt Trigger Channel and check the cameras that will start recording Specify the schedule during which a line crossing detection alarm can be triggered Click Settings gt Arming Schedule Select the day of the week and the time Specify the action when a line crossing detection alarm is triggered Click Settings gt Actions and check one or more response methods Full screen Monitoring When an alarm is triggered the monitor VGA or HDMI displays an image in live view mode For alarms that are triggered simultaneously images display one at a time every 10 seconds default dwell time Change the desired sequence dwell time under Display Settings gt Disloay gt Sequence D
126. n be set up to display a time date stamp for evidentiary purposes see Camera OSD on page 61 The playback windows for 24 hour playback and for the results of a search are slightly different TruVision DVR 44HD User Manual 35 5BChapter 6 Playback functionality Figure 11 Playback window 24 hour playback shown Pp i E a PEAL p m a i 09 22 2014 Tue 10 45 27 AM t 1 Playback viewer 5 2 Camera panel Select the cameras for playback Move the mouse over the area to 6 display the list of cameras available 3 Calendar panel Blue Current date 7 Green Yellow Red Recordings available on the recorder 4 Playback control toolbar See Figure 12 on page 37 for more information The playback control toolbar E Hc Bta Hi E Camera 01 tTa Tihr Time bar Time of actual playback This is only displayed in 24 hour playback 24 hour recording progress bar This bar displays how much of the 24 hour period has been recorded Recording type Description of the color coding of recording types that appear in the playback progress bar Green indicates constant recording Red indicates alarm recording Yellow indicates motion recording Pale green indicates manual recording Pale blue indicates text insertion It is easy to manually control playback using the playback control toolbar See Figure 12 on page 37 below Note The playback control toolbar does not appe
127. n event is displayed on monitor B When there are multiple alarm or motion events the camera images are sequenced on monitor B Live view mouse menu Many features of live view can be quickly accessed by placing the cursor on a live image and clicking the right button of the mouse The mouse menu appears see Figure 14 below Figure 7 The mouse menu for the main monitor Menu Ingle Camera Multi Camera Previous Screen Next Screen Start Sequence 24 hour playback Monitor B e GBSy v corm ET OOMWOOOONWNO Picture Mode gt T Close Time Bar D The list of commands available depends on which monitor is active main or auxiliary monitor B See Table 7 on page 29 The default settings of these commands are provided in the appendix under Default menu settings on page 154 28 TruVision DVR 44HD User Manual 4BChapter 5 Live view Table 7 Mouse menu for monitor A main monitor Name Menu Single Camera Multi Camera Previous Screen Next Screen Start Sequence 24 hour Playback Monitor B Advanced Search Picture Mode Close Time Bar Description Enter the Main menu This option is not available from monitor B Switch to a full screen view for the selected camera from the dropdown list See Single and multiview display on page 30 for more information Switch between the different multiview options from the dropdown list See Single and multiview display
128. n live view mode right click the mouse and click Menu The main menu window appears 2 Select the Shutdown icon 3 Inthe Shutdown popup menu select Reboot Click Yes to confirm shutdown You will be requested to enter the Admin password 12 TruVision DVR 44HD User Manual 2BChapter 3 Getting started The startup wizard The recorder has an express installation wizard that lets you easily configure basic recorder settings when first used It configures all cameras to default settings The configuration of each camera and recorder can be customized as required By default the startup wizard will start once the recorder has loaded It will walk you through some of the more important settings of your recorder Any changes you make to a setup configuration page are saved when you exit the page and return to the main wizard page Note If you want to set up the recorder with default settings only click Next in each screen until the end To use the Startup wizard 1 To launch the startup wizard without rebooting the device go to Menu gt Device Management gt General Settings and click Start wizard 2 Select the preferred language for the system and resolution from the dropdown list and then click Next 3 Enable or disable the option to start the wizard automatically when the recorder is turned on Click Next 4 User configuration You can change the admin password and create additional users Mouse Navigate to t
129. n the whole image Is covered and all light is blocked You cannot select a specific area of the camera screen to detect tampering Note It is strongly recommended not to configure for video tampering when using PTZ dome cameras To set up video tampering detection 1 From the menu toolbar click Camera Setup gt Camera Tamper 2 Select a camera to configure for video loss detection 3 Check the Enable Tamper proof box to enable the feature 4 Select the tamper detection sensitivity level by clicking the sensitivity scroll bar Higher sensitivity is to the right of the bar TruVision DVR 44HD User Manual 69 9BChapter 10 Camera setup 5 Select the recording schedules for the tamper Click Actions and then select the Arming Schedule tab to select the day of the week and the time periods during the day when motion can be recorded You can schedule up to eight time periods in a day Default is 24 hours Click Apply to save the settings Click Copy to copy the settings to other days of the week and holiday period Note The time periods defined cannot overlap 6 Select the response method to an external alarm Click Actions and then select the Actions tab to select the method by which you want the recorder to notify you of the alarm Full screen monitoring Enable alarm audio Notify alarm host Send email and Trigger alarm output See page 93 for the list of alarm notification types Click Apply to save settings and then OK
130. ng a both keypad and dome camera to the recorder Table 25 Bus addresses Recorder bus address Recorder video inputs 1 1 32 1 32 1 32 1 32 1 32 1 32 1 32 oO N O Oo A W PD 1 32 TruVision DVR 44HD User Manual PTZ address range 00 31 32 63 64 95 96 127 128 159 160 191 192 223 224 255 149 Appendix F Maximum pre recording times The maximum pre recording time that can be selected depends on the bit rate Frame rate resolution and image quality do not impact time Note This information only applies when the bit rate is set to Constant see Initializing the recording settings on page 59 for more information Constant bit rate Maximum pre recording time seconds 32 30 48 30 64 30 80 30 96 30 128 30 160 30 192 30 224 30 256 30 320 30 384 30 448 30 512 30 640 30 768 30 896 30 1024 30 1280 25 1536 20 150 TruVision DVR 44HD User Manual Constant bit rate 1792 2048 3072 4096 TruVision DVR 44HD User Manual 23BAppendix F Maximum pre recording times Maximum pre recording time seconds 15 15 10 5 151 Appendix G Supported PTZ commands Table 26 Supported PTZ commands by camera protocols Part 1 PTZ command Protocol Tilt up Tilt Pan Pan Left Left Right Right Auto Zoom Zoom Focus Focus dow left righ up dow up dow pan n t n n Interlogix 485 N Y y Y N N N N N Y Y Y Y Interlogix 422 Y Y Y Y N N N N N Y Y Y Y KALATEL Y Y Y Y N N N N N Y Y Y Y DSCP Y
131. ns window Set the arming schedule for detecting video loss Click the Actions tab and select the schedule of when you want video loss detection to be enabled The schedule can be set for all week or any day of the week with up to 8 time periods per day Click Apply to save the settings Select the alarm response method Click the Arming Schedule tab and select how you want the recorder to notify you of video loss Select Full screen monitoring enable alarm host send email and trigger alarm host See page Types of system alarm notifications above for the descriptions Click Apply to save the settings Click OK to return to the main window Click Copy to copy these settings to other cameras if required and then click Apply to save the changes TruVision DVR 44HD User Manual 12BChapter 13 Alarm and event setup 9 Click Exit to return to live view Remote alarm host setup lf a remote alarm host is set the recorder sends a signal to the host when an alarm is triggered The remote alarm host must have the TruVision Navigator server software installed To set up a remote alarm host 1 From the menu toolbar click Alarm amp Event Setup gt Alarm Host Setup 2 Enter Alarm Host IP and Alarm Host Port values Alarm host IP represents the IP of the remote PC where the Network Video Surveillance software installed The alarm host port value must be the same as software s alarm monitor port Up to three alarm hosts can
132. ntrast saturation hue sharpness and digital noise reduction values by dragging each scroll bar 62 TruVision DVR 44HD User Manual 9BChapter 10 Camera setup Click the Default button to return image setting values to the default position 4 Click Apply to save the settings and then click Exit to return to live view Motion detection The motion detection menu allows you to enable or disable motion detection for each camera as well as create motion grids set the sensitivity of the motion detection and link motion detection to a specific action To set up motion detection 1 From the menu toolbar click Camera Setup gt Motion Detection Areas covered by the red grid are sensitive to motion detection select the camera to detect motion Each camera must be set up individually Check Enable Motion Detection If this is not enabled motion will not be recorded Select the areas on screen to be sensitive to motion Click and drag the mouse cursor across the window to deselect areas sensitive to motion detection i EEA MENEREN EREE ET mamn a I DMAFABERRERRNEDV ae O OL FF Camera Tamper Restricted Access C PTZ Setup PTZ Presets Tours Click Full Screen to activate the whole screen or Clear to clear the screen Set the sensitivity level Drag the Sensitivity scroll bar to the desired sensitivity level Default is 3 Specify the target size In the Target Size option specify how many grid squa
133. nts video loss and more However you cannot access video for playback 48 TruVision DVR 44HD User Manual Chapter 8 Archiving files Archive recorded files on an external device such as USB flash drive USB HDDs or a DVD burner You must be in live view to archive video Access to archive commands may require a password Before starting to archive files ensure that you have the backup device connected to the recorder It can be detected automatically by the recorder Note The recorder supports USB DVD and USB HD on the front and back USB ports Archive files There are two ways to archive files Quick Archive button Quick archive lets you archive recorded files quickly by using the Archive button on the front panel The recorder then downloads all the recorded files on the unit to fill the available memory space on the media This option is not available via the mouse Search results window In many search results windows there is an Archive button Click it to bring you to the archive window of the selected video in the search result Quick Archive To archive recorded video using Quick Archive 1 Insert the backup device into the recorder If using a USB memory drive insert the device into the USB port on the front panel If using a digital video disk DVD or an eSATA drive insert the disc into the DVD drive If more than one media type is found in the recorder the USB device takes precedence over the others 2
134. oduct overview 6 Default settings to access the device 6 Chapter 2 Physical installation 8 Installation environment 8 Unpacking the recorder and its accessories 8 Back panel 9 Monitor connections 11 Rack mounting 11 Chapter 3 Getting started 12 Power onthe recorder 12 The startup wizard 13 Chapter 4 Operating instructions 17 Controling the recorder 17 The front panel description 17 Using the mouse 21 Using the IR remote control 22 Menu overview 24 Chapter 5 Live view 27 Description of live view 27 Video output 28 Live view mouse menu 28 Single and multiview display mode 30 Sequencing cameras 30 Live view toolbar 30 Digital Zoom 32 PTZ preset andtours 32 Chapter 6 Playback functionality 35 Overview of the playback view 35 Playback mouse menu 38 Instant playback 38 24 hour playback 39 Playback speed and skip time 40 Play back frame by frame 41 Digital zoom in playback 41 Create bookmarks 41 TruVision DVR 44HD User Manual Chapter 7 Chapter 8 Chapter 9 Chapter 10 Chapter 11 Searching files 43 search video menu 43 Search for motion events in playback 44 Search and play back recordings by time and video type 45 Search and playback recordings by event 46 Search bookmarked recordings 47 Search snapshots 47 Log search 48 Disk analysis 48 Archiving files 49 Archive files 49 Create and archive video clips 51 Play back archived files onaPC 52 Display settings 53 Display settings 53 Layout 54 C
135. omplies with Canadian ICES 003 Cet appareil mum rique de la classe A est conforme a la norme NMB 003 du Canada Notice This is a Class A product In a domestic environment this product may cause radio interference in which case the user may be required to take adequate measures CE QO nis Ws 2004 108 EC EMC directive Hereby UTC Fire amp Security declares that this device is in compliance or with the essential requirements and other relevant provisions of Directive 2004 108 EC 2012 19 EU WEEE directive Products marked with this symbol cannot be disposed of as unsorted municipal waste in the European Union For proper recycling return this product to your local supplier upon the purchase of equivalent new equipment or dispose of it at designated collection points For more information see www recyclethis info 2006 66 EC battery directive This product contains a battery that cannot be disposed of as unsorted municipal waste in the European Union See the product documentation for specific battery information The battery is marked with this symbol which may include lettering to indicate cadmium Cd lead Pb or mercury Hg For proper recycling return the battery to your supplier or to a designated collection point For more information see www recyclethis info For contact information see www interlogix com or www utcfssecurityproducts eu Content Important information 5 Chapter 1 Product introduction 6 Pr
136. on page 30 for more information Displays the previous camera Displays the next camera Turn on sequence mode The window automatically sequences between cameras To set up the sequence dwell time go to Menu gt Display Settings gt Display gt Sequence Dwell Time and select a value Playback the recorded video of the selected day from the selected camera The current day is selected by default See 24 hour playback on page 39 for more information Switch between monitors A main and B event Enter the advanced video search menu See Searching recorded video on page 40 for more information Select Standard Bright Soft or Vivid mode to display Open close the time bar Table 8 Mouse menu for monitor B event monitor l Or es ee Name Single Camera Multi Camera Previous Screen Next Screen 24 hour Playback Monitor A TruVision DVR 44HD User Manual Description Switch to a full screen view for the selected camera from the dropdown list Switch between the different multiview options from the dropdown list Displays the previous camera Displays the next camera Playback the recorded video of the selected day from the selected camera The current day is selected by default See 24 hour playback on page 39 for more information Switch between monitors A main and B event 29 4BChapter 5 Live view Single and multiview display mode The recorder has single and multivi
137. ou of the alarm Select one or more of the six notification types See Alarm notification types on page 93 for a description of these alarm notification methods Click Apply to save the settings 8 Select the PTZ camera function required in response to an external alarm In the Actions window click the PTZ Linking tab Select the PTZ camera and enter the preset preset tour or shadow tour that is triggered when the alarm is detected Rule Trigger Channel Arming Schedule Rule inking Analog 1 3 1 Click Apply to save the settings 9 Click OK to return to the alarm input window 10 Click Exit to return to live view Set up alarm outputs You can connect the recorder to an alarm system such as a siren or intrusion system which is then activated when an alarm is triggered You can select how long the alarm signal remains active as well as schedule when alarm outputs can be triggered To set up an alarm output 1 From the menu toolbar click Alarm amp Event Setup gt Alarm Output 2 Select the alarm output 3 Select a timeout option between 5 and 600 seconds or select Manually Clear TruVision DVR 44HD User Manual 91 12BChapter 13 Alarm and event setup The timeout setting lets you define how long an alarm signal remains active after the alarm has ended If you select Manually Clear the alarm signal remains active until it is manually acknowledged by pressing the alarm button on the front panel or re
138. ow for how to connect a PTZ camera to the recorder Figure 37 Connecting a PTZ dome camera to the recorder for control over the network Dome camera a Recorder back panel 0 0 6 6 0 0 0 990 0 0 KOKE by g RS 485 port Configuring the PTZ protocols for Interlogix cameras Before the PTZ dome cameras are assembled in their housings set their protocol and address DIP switches for the recorder See Table 20 on page 138 for different Interlogix PTZ dome camera settings If you are using PTZ dome cameras from another company please refer to their configuration instructions TruVision DVR 44HD User Manual 137 21BAppendix D Connect a PTZ dome camera Table 20 PTZ protocols for Interlogix cameras Camera TruVision Mini PTZ 12X Indoor Dome TruVision Mini PTZ 12X Outdoor Dome 138 Switch setting Protocol DIP switches e RS 485 on recorder e RS 422 on I O box RS 485 communication DIP switches Camera ID DIP switches 000000 100000 110000 Select the camera ID DIP switch address as required RS 422 RS 485 data connector Protocol DIP switches e RS 485 on recorder e RS 422 on I O box RS 485 communication DIP switches Camera ID DIP switches 000000 100000 110000 Select the camera ID DIP switch address as required RS 422 RS 485 data connector 1 Protocol DIP switches 2 RS 485 communication DIP switches 3 Camera ID DIP swi
139. page 71 for more information Digital Zoom Enter digital zoom See Digital zoom on page 32 for further information Image Settings Enter the image settings menu to modify the image lighting levels There are two options Preset Mode These are preconfigured image lighting levels Select one of the four options depending on current lighting conditions Standard Use in standard lighting situations Indoor Use indoors Dim Light Use when the light level is low Outdoor Use when outdoors The contrast and saturation values are high Customize Modify brightness contrast saturation and hue values Click Restore to restore image settings to previous values Click Restore to restore image settings to previous values Click Default to return to default values These settings can also be modified from the Camera Setup gt Image menu see page Image settings on page 62 Auxiliary Focus Automatically focus the camera lens for the sharpest picture Lens Initialization Initialize the lens of a camera with a motorized lens such as PTZ or IP cameras This function helps to maintain lens focus accuracy over prolong periods of time 4BChapter 5 Live view Icon Description Close Toolbar Close the toolbar Digital zoom You can easily zoom in or out of a camera image in live view mode and playback using the digital Zoom command The zoom command magnifies the camera image four times See Figure 17 below
140. r Manual 22BAppendix E KTD 405 keypad Task Keypad action Further information Jump 30 seconds forwards or Press and hold esc and then backwards during playback press the up down arrow buttons or move the joystick to the left right Controlling a camera When setting up and controlling your cameras in zone mode refer to Table 23 below for the list of default PTZ addresses associated with a zone ID This value is automatically populated in the system You can modify the PTZ address in the PTZ menu to meet customer requirements see Configuring PTZ settings on page 71 Table 23 Default PTZ camera addresses by zone ID Camera Zone ID of the recorder meat 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 416 1 0 32 64 96 128 160 192 224 256 288 320 352 384 416 448 480 2 1 33 65 9 7 129 161 198 225 257 289 321 353 385 417 449 481 3 2 34 66 98 180 162 194 226 258 290 322 354 386 418 450 482 4 3 35 67 99 131 163 195 227 259 291 323 355 387 419 451 483 5 4 36 68 100 132 164 196 228 260 292 324 356 388 420 452 484 6 5 37 69 101 133 165 197 229 261 293 325 357 389 421 453 485 7 6 38 70 102 134 166 198 230 262 294 326 358 390 422 454 486 8 7 39 71 103 135 167 199 231 263 295 327 359 391 423 455 487 9 8 40 72 104 136 168 200 232 264 296 328 360 392 424 456 488 10 9 41 73 105 137 169 201 233 265 297 329 361 393 425 457 489 11 10 42 74 106 138 170 202 234 266 298 330 362 394 426 458 490 12 11 43 75 107 139 171 203 235 267 299 331 363 395 427 459 491 13 12
141. rd using 13 Shadow tours quick access 33 Skip time playback 40 quick access 38 Snapshots capture remotely 124 playback 47 recording settings 61 upload to FTP server 82 SNMP protocol settings 82 Soft keyboard 26 Status icons enable disable display 98 System information view 115 System logs playback 118 search 118 Tampering detecting video tampering 69 Text insertion via the browser 101 Text overlay 130 Time configuring display 96 U User privileges camera configuration 113 local configuration 112 remote configuration 113 168 Users adding a new user 111 customizing user privileges 112 deleting a user 114 modify user information 114 V Video format PAL NTSC 12 Video loss setting up detection 94 Video output change manually 98 Video outputs 28 Video search menu 43 Video tampering setting up to detect 69 V stream encoding 74 W Warning buzzer modifying 92 Web browser accessing 122 camera management 127 control PTZ dome camera 124 digital zoom 125 remote configuration of recorder 127 search event logs 126 searching and playing back recorded video 124 text insertion 101 video snapshot 124 Wizard enable disable 98 TruVision DVR 44HD User Manual
142. recorder via SNMP When you set the trap address and trap port in the recorder menu to the network management system s IP address and port number and set up the network management system as trap receiver trap notifications Such as startup are sent from the recorder to the network management system Before configuring this function you must first install the SNMP software To configure SNMP protocol settings 1 From the menu toolbar click Network Settings gt SNMP 2 Check the Enable SNMP box 3 Enter the required settings 4 Click Apply to save the settings and click Exit to return to live view UPnP settings The recorder supports UPnP Universal Plug and Play This feature lets the recorder automatically configure its own port forwarding if this feature is also enabled in the router You can select one of two methods to set up UPnP Automatic mapped type The recorder automatically uses the free ports available that were set up in the Network Settings menu 82 TruVision DVR 44HD User Manual 10BChapter 11 Network settings Manual mapped type You enter the particular external port settings and IP addresses required to connect to the desired router See Figure 26 below Figure 26 UPnP auto configuration screen Network Settings PPPOE Se Manual DONS Port Type External Port Mapping IP Address RTSP Fort A TH 00 00 IH Server Port A p000 0000 S000 Net Detect Nehwork Statistics Network Setting
143. res must be activated before motion is detected Enter a value between 0 and 255 squares Default is 1 square Select the cameras that will start the motion recording schedule once motion is detected Click Actions The Actions window appears Click the Trigger Channel tab and select the cameras that will record when a motion alarm is triggered Click Apply to save the settings 8 Select the arming schedules for motion detection TruVision DVR 44HD User Manual 63 9BChapter 10 Camera setup In the Actions window click the Arming Schedule tab and select the day of the week and the time periods during the day when motion can be recorded You can schedule up to eight time periods in a day Default is 24 hours Click Apply to save the settings Click Copy to copy the settings to other days of the week Note Time periods defined cannot overlap Link the corresponding action to motion detection In the Actions window click the Actions tab to define the method by which you want the recorder to notify you of the alarm see page 93 for the list of alarm notification types available Notify Alarm Host is the default selection More than one option can be selected Click Apply to save settings 10 Click OK to return to the motion detection settings window 11 Click Exit to return to live view Line crossing detection This function can be used to detect people vehicles and objects crossing a pre defined line or an area on scre
144. rs See Chapter 16 User management on page 111 for more information Review the status of the device See Chapter 17 information on page 115 for more information Review the status of the cameras See Chapter 17 System information on page 115 for more information Review the status of the recordings See Chapter 17 System information on page 115 for more information Review the status of the alarm inputs See Chapter 17 System information on page 115 for more information Review the status of the alarm outputs See Chapter 17 System information on page 115 for more information Review the status of the network See Chapter 17 System information on page 115 for more information You can add up to four lines of text on screen via the browser This option can be used for example to display emergency contact details By default these lines of text are positioned along the top of the screen The strings follow each other consecutively Note This option is not available via the recorder To add on screen overlay text 1 Click the Configuration tab in the browser toolbar and then select Camera Settings gt Text Overlay 2 Select the desired camera 130 TruVision DVR 44HD User Manual 17BChapter 18 Using the web browser 3 Check the string box 1 for the first line of text 4 Enter the text for string 1 in the column alongside Up to 44 alohanumeric characters can be used
145. rt 554 HTTP port 80 Server Client software port 8000 For more information on port forwarding see Appendix C Port forwarding information on page 135 Web browser live view The recorder web browser lets you view record and play back videos as well as manage all aspects of the recorder from any PC with Internet access The browser s easy to use controls give you live view to all the recorder functions See Figure 32 on page 123 122 TruVision DVR 44HD User Manual 17BChapter 18 Using the web browser Figure 32 Live view in the web browser interface cA uVision TVR 44HD Live View Playback Log Search Configuration MIIR 120 2 0 2 9 7A amera 13 k Lo Camera 14 2 O camera 15 S E Camera 1 V ipcamera 01 T E v stream Camera 09 l on a r SPY j 3 sM Camera 1 Q4 15 2014 Tusel2 57 29 P AA 2014 Tue 12 57 29 amera 11 i BY amera 12 A ae Cameral La 04 15 2014 tyer12 5 7928 Fe 2 Camera10 Table 18 Description of live view in the web browser Name 1 Camera 2 Menu toolbar 3 Viewer gt Display format 5 Video function toolbar TruVision DVR 44HD User Manual Description Select the camera Lets you do the following e View live video e Play back video e Search for event logs e Configure settings e Log out of the interface View live or playback video Define how you want video to be displayed in the viewer Multiview or full screen
146. s Snapshots Camera OSD Image TruVision DVR 44HD User Manual Record Snapshot 25BAppendix H Default menu settings Camera No Status Edit Advanced Set Live View Camera Name IP Camera Address Manage Port Protocol Device Model Serial Number and Firmware Camera Name Analog 1 Record Stream Mode Main Stream TL Hi Stream Type Video amp Audio Resolution Self sensing Bit Rate Variable Video Quality Medium Frame Rate 12fps Max Bitrate Mode General Max Bitrate Kbps 2048 Pre Event 5 s Post Event 5 s Auto Delete day 0 Record Audio Yes Camera Analog 1 Resolution 352 288 CIF Snapshot quality Medium Camera OSD Settings Image Settings Camera Analog 1 Camera Name Camera 01 Display Name Yes Display Date Yes Display Day Yes Date Format MM DD YYYY Time Format 12 hour Display Mode Non transparent amp Not Flashing OSD font 32 32 Camera Analog 1 Image Setting Standard 155 25BAppendix H Default menu settings 156 Motion Detection VCA SMD Privacy Mask Camera Tamper Brightness 128 Contrast 128 Saturation 128 Hue 128 Sharpness 1 Digital Noise 2 Motion Detection Settings VCA Camera Analog 1 Enable Motion Detection No Actions Trigger Channel camera self Arming Schedule All day for whole week Actions Null Sensitivity 3 Target size 1 Zone Full Screen Camera Analog 1 Type Line Crossing Detection
147. s To enable UPnP 1 Connect the recorder to the router UPnP Status Inachve Inachve Apply Note The router must support UPnP and this option must be enabled From the menu toolbar click Network Settings gt UPnP Check the Enable UPnP box From Mapped Type select Auto or Manual lf Manual is selected enter the external ports and IP addresses required Click the Edit icon to change the values Click Apply to save the settings and click Exit to return to live view Network status You can easily check network traffic in order to obtain information about the recorder such as its linking status MAC address MTU sending receiving rate and NIC type The Network Detection window shows the network traffic between the recorder and your local network You can also check the network connection status by testing its delay and packet loss TruVision DVR 44HD User Manual 83 10BChapter 11 Network settings To check network traffic 1 From the menu toolbar click Network Settings gt Net Detect The Traffic window appears The information displayed is refreshed once a second Network Settings ae 4 096Kbps PPPOE DDNS NTF Email Network Statistics l LAN t Sending Obps 4 Receiving Obps Name Linking Status Type MAC Address MTU B NIC Type Traffic Network Delay Packet Loss Tesl lect f LAN Network Packet Archive etresh LAN 192 168 182 Export Status hehaork Network Settin
148. s The advisory messages used in this document are shown and described below WARNING Warning messages advise you of hazards that could result in injury or loss of life They tell you which actions to take or to avoid in order to prevent the injury or loss of life Caution Caution messages advise you of possible equipment damage They tell you which actions to take or to avoid in order to prevent damage Note Note messages advise you of the possible loss of time or effort They describe how to avoid the loss Notes are also used to point out important information that you should read TruVision DVR 44HD User Manual Chapter 1 Product introduction Product overview This recorder is a full featured and scalable digital video recording system that can store display search export and manage video from up to 16 analog HD analog or IP cameras It provides integration with the UTC portfolio of security solutions and offers a seamless product experience within the TruVision brand The recorder can fully integrate with the license free TruVision Navigator software which is ideal for the most commercial applications Its easy and intuitive to use web browser interface enables remote configuration and secure viewing searching and playing back of video trom computers connected via the Internet Note Models are shipped with the power cords for their region Default settings to access the device Default user names and passwords s
149. s record type file type as well as start and end times of the recording Click Search The list of search results appears Click to play back the search results TruVision DVR 44HD User Manual 45 6BChapter 7 Searching files To immediately access archived footage 1 Inthe Search menu click the Time amp Date tab 2 Select the desired cameras record type file type as well as start and end times of the recording Up to eight cameras can be selected 3 Click Go The simultaneous playback of up to eight cameras for the indicated time will start To search for motion 1 Inthe Time amp Date search menu select the desired camera record type file type as well as start and end times of the recording Only one camera can be selected N Click Motion Search The motion search view opens 3 Inthe motion search view mark the area in which the recorder needs to search for motion Use the motion search toolbar to select full screen remove full screen selection start motion search and exit motion search 4 Click gt to retrieve the motion events The standard playback view opens containing all recordings for the period of time selected Motion events are shown in blue in the time bar Click on the time bar to skip from one motion event to the next Search and playback recordings by event You can search recorded video by event type motion text insertion intelligent alarms and alarm input To play
150. s to choose from e eZDDNS A free of charge service included with your recorder and fully managed within the recorder interface e DynDNS A third party service where users need to apply for a DynDNS account on the Dyn com website e No IP A third party service where users need to apply for a no IP account on the no ip com website Figure 25 ezDDNS setup window Network Sethings PPPOE NTP Email FIP SNMP UPnP Net Detect Network Statistics Note that DNS servers and Default Gateway must be entered in Network Settings tab Network Settings Note You cannot have two recorders with the same host name To set up DDNS 1 From the menu toolbar click Network Settings gt DDNS 2 Check the Enable DDNS box to enable this feature 3 Select one of the DDNS types listed ezDDNS Click the Get URL button The URL address to access the unit is displayed If no host name is specified the DDNS will allocate one automatically TruVision DVR 44HD User Manual 79 10BChapter 11 Network settings The maximum length for the host name field is 64 characters This limit does not include tvn ddns net An example of a host name could be max64chars tvr ddns net Or DynDNS Select DynDNS and enter the server address for DynDNS In the recorder domain name field enter the domain name obtained from the DynDNS web site Then enter your user name and password registered in the DynDNS network For example Server address
151. sabled Felresh niggered Gamera TruVision DVR 44HD User Manual 16BChapter 17 System information 6 To view alarm output information click Alarm Outputs You can view the alarm output number alarm name and alarm status i tt are Device Into Camera Record Alarm Inputs Network HDO Log Search amp System Information Alarm Outputs Mo Alarm Name Alarm Status A gt 1 Enabled Refresh 7 To view network information click Network You can view the IPv4 address IPv4 subnet mask IPv4 default gateway IPv6 address 1 IPv6 address 2 IPv6 default gateway preferred DNS server alternate DNS server enable DHCP enable PPPoE PPPoE address PPPoE subnet mask PPPoE default gateway MAC address serer port HTTP port multicast IP RTSP service port enable Telnet and total bandwidth limit Kbps Device Info Camera Record Alarm Inputs Alarm Outputs HDD Log Search System information LAN1 iPv4 Subnet Mask 255 255 255 0 IPv4 Default Gateway 192 168 1 1 iPv6 Address 1 iPv6 Address 2 iPv6 Default Gateway Preferred DNS Server Alternate DNS Server Enable DHCP Disabled Enable PPPOE Disabled PPPOE Address PPPOE Subnet Mask PPPOE Default Gateway MAC Address c0 56 e3 10 ca 9a Server Port 8000 HTTP Port 80 Mulhcast IP Refresh 8 To view HDD information click HDD You can view the HDD label status capacity free space property type and group TruVision DVR 44HD User M
152. stomize a user s access privileges 112 Local configuration settings 112 Remote configuration settings 113 Camera configuration settings 113 Delete auser 114 Modify a user 114 Change the Admin password 114 System information 115 View system information 115 Search the system log 118 Using the web browser 121 Windows 7 and Windows 8 users 121 Access the web browser 122 TruVision DVR 44HD User Manual Web browser live view 122 Control a PTZ dome camera via the web browser 124 Play back recorded video 124 Search for event logs 126 Configure the recorder via the browser 127 Text overlay 130 Appendix A Specifications 132 Appendix B PTZ protocols 134 Appendix C Port forwarding information 135 Seeking further assistance 135 Appendix D Connect a PTZ dome camera 137 Configuring the PTZ protocols for Interlogix cameras 137 Appendix E KTD 405 keypad 141 Supported firmware 141 Wiring the keypad 141 Setting the keypad to work with the recorder 142 Recorder and keypad functions 143 Operating the keypad 144 Recorder mapping to the KTD 405 keypad 145 Controlling a camera 147 Connecting a KTD 405 keypad and dome camera to the recorder 148 Appendix F Maximum pre recording times 150 Appendix G Supported PTZ commands 152 Appendix H Default menu settings 154 Index 166 4 TruVision DVR 44HD User Manual Important information Advisory messages Advisory messages alert you to conditions or practices that can cause unwanted result
153. t NTSC or PAL video output The video standard used is auto detected but can be manually changed TruVision DVR 44HD User Manual 53 8BChapter 9 Display settings Option N 10 11 12 13 14 Picture Setting BNC Output Brightness Resolution Display Status Icons Timebar Transparent Enable Timebar Video Output Interface Default View Sequence Dwell Time Enable Audio Output Event Monitor Event Full Screen Monitoring Dwell Time Alarm Full Screen Monitoring Dwell Time Layout Description Modify the video standard used to PAL or NTSC and click Apply Define the desired output mode Select one of the options from the drop down list Standard Bright Soft or Vivid and click Apply Modify the video output brightness Adjust the scroll bar point to the desired level and click Apply Define the resolution of the selected monitor Select one of the options from the drop down list and click Apply The selected resolution must be the same as that of the monitor Define whether the status icons are displayed Default is Enable Select the transparency of the monitor output time bar on screen relative to the background to make the time bar easier to read Check the box to enable disable Default is Disable Select whether the monitor output time bar appears on screen Check the box to enable disable Default is Enable Select the desired video output interface to apply Main BNC or VGA H
154. t the selected files are the files to export 6 Click Archive The Archive window appears 7 Select the storage medium to export to from the drop down list 8 Click Archive to begin the backup process Create and archive video clips You can save important scenes in a recorded file for later reference by creating video clips of selected portions of the file during playback When an intruder for example crosses in front of several cameras you can save the video clip of the intruder s path across these cameras in a single file Up to 30 video clips can be made from a recording Note This feature is only available using the mouse To export video clips during playback 1 Connect the backup device to the recorder 2 Search for the required files to play back See Searching recorded video on page 40 3 Select the file or files to play back and click Play Playback starts immediately 4 Click the Clipping 5 Click the playback timeline where you want the video clip to stop and click the End Clipping button 6 Repeat for additional clips back timeline where you want the video clip to start and click the Start button 7 Exit playback mode A message appears asking if you want to save the video clips TruVision DVR 44HD User Manual 51 7BChapter 8 Archiving files 8 Click Yes to archive the clips The Archive window appears Click No to exit and return to the search results window The clips are not save
155. t to return to live view To call up a preset tour l From the menu toolbar click Camera Setup gt PTZ Preset Tours 2 Check Call Preset and enter the preset number to call up The camera immediately moves 3 to that preset position Click Exit to return to live view To set up a preset tour 1 2 3 From the menu toolbar click Camera Setup gt PTZ Preset Tours Select the preset tour number In the preset tour toolbar click to add a step to the preset tour The Step window appears Select the preset number dwell time and speed of the step Click OK to save the settings Note A preset tour should have at least two presets Repeat step 3 to configure other steps in the preset tour Save Preset 1 2 3 4 5 6 7 8 amp 8 9 10 49 12 13 14 15 16 17 tCOtzw z E Call Preset TruVision DVR 44HD User Manual 73 9BChapter 10 Camera setup 5 Inthe preset tour toolbar click L to call up the preset tour 6 Click Exit to return to live view To call up a preset tour 1 Click the PTZ Settings icon on the menu toolbar and select More Settings 2 Select the desired preset tour from the list and click CJ to start the tour Click to stop the preset tour 3 Click Back to return to live view To delete a preset tour 1 From the menu toolbar click Camera Setup gt PTZ Preset Tours 2 From the preset tour list select a tour number and click to delete the selected the preset tour
156. t used Not used 4 Toview record information click Record Not used Not used Not used Not used Video Loss Previ Preview Link Info Not used Not used Not used Not used Refresh 0 0 0 0 You can view the camera number recording status stream type active frame rate active bit rate versus reserved bit rate Kbps active resolution active record type and active encoding parameters The Preview Link Sum shows the number of streams being viewed by the recorder The Preview Link Information lists all the IP addresses of the streams viewed by the recorder Device Into Camera Alarm Inputs Alarm Outputs Nelwork HOL Log Search System Information Recordin Recording Recording Recording Recording Frame R Video amp Video amp Video amp Video amp Bitrate Kbps 1534 2048 1517 2048 1502048 Resolution Record T 1280 720 HD 1280 720 HD 1280 720 HD 1280 720 HD 5 To view alarm input information click Alarm Inputs Constant Constant Constant Refresh Encoding You can view the alarm input number alarm name alarm type alarm status and triggered Camera 5 Alarm input Device Info Pea PES No A 1 Record A 2 24 Alarm inputs Az3 TE A lt 4 Camera Alarm Outputs Network HDL Log Search System Information 116 Alarm Name Alarm Type NO NO NO Alarm Status Disabled Disabled Disabled Di
157. tches D 0 S Sl Wit D 0 1 D R A 5 5 D R B 1 Protocol DIP switches 2 RS 485 communication DIP switches 3 Camera ID DIP switches D 0 S Sl St D 0 1 D R A 5 D R B TruVision DVR 44HD User Manual Camera TruVision Dome 16X PTZ CyberDome Switch setting Protocol switches e RS 485 on recorder e RS 422 on I O box Address switches Baud rate 0111 1111 Select the camera ID DIP switch address as required 0000 9600 bps 0011 4800 bps RS 422 RS 485 data connector Protocol switches Address switches RS 485 data connector TruVision DVR 44HD User Manual NA Select the camera ID DIP switch address as required 21BAppendix D Connect a PTZ dome camera 1 Address switches 2 Baud switches 3 Protocol switches Data In A Data In B 139 21BAppendix D Connect a PTZ dome camera Camera Switch setting UltraView PTZ Protocol switches e RS 485 on recorder 01000 e RS 422 on I O box 10000 Address switches Select the address switch address as required 1 Protocol switches 2 Address switches RS 422 RS 485 data connector B RS 485 429 A RS 485 422 IK Legend Protocol switches 1 e RS 485 on recorder e RS 422 on I O box 0 Address switches Select the camera ID DIP switch address as required sepa ip a RS 422 RS 485 data connec
158. the details for the selected submenu are displayed Click a field to make changes Note See Table 3 on page 18 for the description on how to access the menu options using the front panel 24 TruVision DVR 44HD User Manual 3BChapter 4 event setup Table 5 Description of the menu toolbar icons Icon Name Display Settings Camera Setup Network Settings Recording Alarm and Event Setup Device Management Storage Management User Management EB D EB Ea System Information Help Shutdown Ee To access the main menu Description Configures display settings including video format resolution video output interface dwell time multiview format and camera sequencing See Chapter 9 Display settings on page 53 Configures analog and IP cameras snapshot resolution and quality camera settings including OSD privacy masking tampering restricted access motion detection setup PTZ setup preset tours and show tours V stream encoding See Chapter 10 Camera setup on page 56 Configures standard network settings including IP address email notifications DDNS setup and advanced network settings See the Chapter 11 Network settings on page 76 Configures recording settings including instant replay duration recording schedule and manual recording See Chapter 12 Recording on page 86 Configures alarm settings including alarm input alarm output manual trigger
159. the size of the OSD font displayed select one of the options from OSD Font 7 7 There are two colored text boxes in the camera view window one for the camera name red box and the other for the date time yellow box Using the mouse click and drag a text box to the display position 8 8 To copy the settings to other cameras click Copy and select the desired cameras Click OK 9 Click Apply to save the settings and then click Exit to return to live view Image settings The Image tab allows you to adjust image settings for each individual camera channel You may need to adjust the camera image depending on the location background in order to get the best image quality The system has image settings for frequently encountered lighting conditions Standard Indoor Dim Light and Outdoor You can also manually adjust the brightness contrast saturation hue and saturation values You can modify the digital noise reduction DNR value to improve image quality This function removes image noise from a video signal which can be more pronounced in low light conditions Note These options can also be modified from the image settings button on the live view toolbar see Live view toolbar on page 30 To adjust display settings 1 From the menu toolbar click Camera Setup gt Image 2 Select the camera for which to adjust the video image settings Standard Indoor Dim Light or Outdoor 3 Adjust the brightness co
160. ther information on searching and viewing logs go to Search the system log on page 118 126 TruVision DVR 44HD User Manual 17BChapter 18 Using the web browser Figure 35 Results of a log search SeruVision TVR 44HD Playback Log Search Log Time Configure the recorder via the browser Click Configuration on the menu toolbar to display the configuration window There are two ways to configure the recorder Local and Remote Camera management Camera configuration lets you define communication and network parameters such as protocol type maximum file size stream type and network transmission settings You can also specify the directory locations for saving recorded and playback video captured images and downloaded files Remote configuration See Figure 36 on page 128 for an example of the Configuration screen See Table 19 on page 128 for an overview of the different browser menu functions Please refer to the specific sections on the OSD menu functions for more information on configuring these functions Go to Browser Configuration to set up the browser parameters See Access the web browser on page 122 for further information Note The configuration settings defined remotely are different from those that can be defined locally TruVision DVR 44HD User Manual 127 17BChapter 18 Using the web browser Figure 36 Remote browser configuration window System Information window shown TVR 44HD Liv
161. timeline for where you want playback to start 40 TruVision DVR 44HD User Manual 5BChapter 6 Playback functionality Play back frame by frame You can play back a selected video at different speeds This allows you to carefully examine an event frame by frame as it happens The current frame rate is shown on the right of the playback control toolbar To play back frame by frame e Using a mouse 1 In playback mode click the Speed Down E button in the playback control toolbar until the speed changes to single frame 2 Click the Pause button to advance the video frame by frame e Using the front panel 1 In playback mode move the left direction button to left to scroll down through the speed changes until single frame 2 Press Enter to advance the video frame by frame Digital zoom in playback You can zoom in on an image during playback to see it in greater detail There are two ways to perform digital zoom in playback To digitally zoom in during playback 1 In playback mode right click the mouse and select Digital Zoom in the pop up menu Or Click the Digital Zoom icon in the playback control toolbar The playback control toolbar disappears The digital Zoom window appears 2 Left click the mouse and drag the red square in the digital Zoom window to the area of interest or move the joystick on the front panel to position the red square The selected area is magnified 3 Right click the mouse to quit the
162. tion detection Blue Indicates video recorded triggered by a POS ATM text recording Pale green Indicates manually recorded video Select a camera and a day to search from on the calendar displayed and then click Search The timeline below the page indicates video recorded for the specified day The timeline also classifies by color the type of recording with each type Click and drag the marker across the timeline on where you want video playback to begin and then click Play on the playback control toolbar You can capture a snapshot of a video image save the video playback or download the recorded video Search for event logs The recorder compiles a log of events such as the start or end of video recording recorder notifications and alarms through which you can easily search Logs are categorized by the following types e Alarm Includes motion detection tamper detection video tampering and other alarm events e Notifications Includes system notifications such as video loss HDD failures and other system related events e Operations Includes users access to the web interfaces and other operational events e Information Includes general information on the recorder actions such as the start and end of video recording etc To search for logs click Log on the menu bar select a log type specify a date and time range and then click Search See Figure 35 on page 127 for an example of the results of a log search For fur
163. to remote management software when a line crossing detection alarm occurs Send Email Send an email to a specified address when there is a line crossing detection alarm Note You must configure email settings before enabling this option See E mail settings on page 81 for further information If you want to send the event snapshot together with the email check the Attached Snapshot option Upload Snapshot to FTP Capture the image when an alarm is triggered and upload the picture to NAS or FTP server Note To upload the snapshot to NAS you must first configure the NAS settings See Add a network storage system on page 109 for further information To upload the snapshot to an FTP you must first configure the FTP settings See Configure an FTP server to store snapshots on page 82 To upload the snapshot to FTP and NAS when motion detection or an alarm input is triggered you must also enable Upload Snapshots to FTP under the alarm input actions See Alarm notification types on page 93 for further information Trigger Alarm Output Trigger external alarm outputs when an event occurs Check Select All or each individual alarm output Note This option is only supported by cameras that support alarm output 12 Click Apply to save changes 13 Click Exit to return to live view Privacy mask You can define an area on screen to remain hidden from view and recording For example you can choos
164. tor BRS 485 429 A RS 485 422 140 TruVision DVR 44HD User Manual Appendix E K T D 405 keypad Supported firmware TVR 44XX YYY firmware 1 01 or higher KTD 405U 2DU keypad firmware 1 4 00 Note XXX represents the number of video channels YYY represents the recorder storage configuration such as 1T 1 TB etc Wiring the keypad Connect the RS 485 bus of the KTD 405 I O box to the recorder keypad terminal port Table 21 Keypad and recorder connections KTD 405 I O box Recorder connection RS 485 A D RS 485 B D TruVision DVR 44HD User Manual 141 22BAppendix E KTD 405 keypad Figure 38 Keypad and recorder connections i dBLs TH Ji LATO ee ED es 6 RS 485 o gt Bs er O HQ oa aq oe 6 G Sea id AE boe et a ae na ore H OOOO oC px mae O g H D 2 OO RS 485 and RS 422 in out RS 485 termination switch A KTD 405 keypad E RJ45 cable control use the cable provided B RS 232 programming port E EOU PE F I O box C D G Recorder back panel See Connecting a KTD 405 keypad and dome camera to the recorder on page 148 for information on how to connect both a keypad and dome camera to the recorder Setting the keypad to work with the recorder The keypad must be in zone mode to connect correctly with the recorder Further information on connecting and programming the KTD 405 keypad can be found in the user manual To set the keypad in zone mode 1 Lo
165. u Move the selection to the next item Using the IR remote control The recorder is supplied with an infrared IR remote control unit Like the mouse it can be used to operate all of the main functions of the unit The IR remote control can be programmed with a unique device ID address so that the controller will only be able to communicate with recorders with that address No programming is necessary if using a single recorder The device ID address only applies when using a remote control and not when using a keypad You can purchase a replacement remote control by ordering part number TVR REMOTE 1 Figure 4 IR remote control r Q c O O O T m 0 5 Tu Focus OC ad Cocic 45 D Item Description 1 Alarm Acknowledge an alarm Device Enable disable the IR remote control to control the recorder Numeric buttons Select a camera and enter a number in a menu option Display Switch between the different multiview formats Mon A and Mon B Switch between monitors A and B Oy OF e iy Live Return to live view mode 22 TruVision DVR 44HD User Manual 3BChapter 4 Operating instructions Item Description 7 Menu Activate the main menu 8 Seq Start stop sequencing 9 lt gt i AN V In Menu mode Use left or right arrow buttons to select and up or down arrow buttons to edit entry In PTZ mode Use to control PTZ In Playback mode Use
166. ually add an IP camera 1 From the menu toolbar click Camera Setup gt IP Camera Status 2 Click Manual Add In the pop up window enter the camera details such as the IP camera address domain protocol management port user name and password Click OK The camera Is added to the end of the list of devices Note Only one camera can be manually added at a time Camera recording settings To configure recording settings 1 From the menu toolbar click Camera Recording Settings m P A A o a A A Analog Camera Over IP Camera Status Analog 3 Main Stream TL Hi Video amp Audio 1280 720 HD720P Camera OSD trate Tyg Variable Snapshots Medium 12fps Image Motion Detection ax rate Mods General VCA SMD r kaia hns 2048 Privacy Mask re Eveni 5s Camera Tamper t Eveni 55S 0 rd Audio Restricted Access C PTZ Setup PTZ Presets Tours Recommended bitrate range 1105 1842 Kbps V stream Encoding gt Camera Setup 2 Select the camera you want to configure 3 Configure the following recording settings options available depend on the camera model e Stream Record Mode Select one of the stream types to configure the recording parameters of that record mode Mainstream TL Hi default Mainstream TL Lo Mainstream Event Mainstream Alarm or Substream e Stream Type Select the type of stream to record either video or video and audio e Resolution Select th
167. udio 4 BNC monitor output Connect one event CCTV monitor 1 Vp p BNC signal 5 RS 232 input Text insertion for point of sale and ATM devices Also used by technical support See Configuring the RS 232 port on page 101 for more information 6 eSATA Connect an optional eSATA drive to extend the internal storage 7 Up to 16 BNC type Connect up to 16 analog cameras to connectors BNC connectors depends on the recorder model 8 USB 2 0 port Connect a mouse CD DVD burner or The recorder supports both a USB HDD mouse and a USB HD on the front and back USB ports 9 HDMI monitor output Connect to a HDTV The HDMI connection supports both digital audio and video 10 VGA monitor output Connect to a VGA monitor 11 10 100 1000 RJ 45 Connect to a network network interface 12 16 alarm inputs Connect physical alarms such as detectors push buttons etc 10 TruVision DVR 44HD User Manual 14 15 16 Description Four alarm outputs Ground Power cord Power switch 1BChapter 2 Physical installation Use Specification Connect physical alarm outputs such as a siren flash relay Connect to ground Connect a PSU The PSU is shipped with the recorder Turn the recorder on off Monitor connections Connect a monitor to one of the recorder s outputs BNC VGA HDMI The recorder provides a 1 Vp p analog signal See Figure 1 on page 10 for connecting a monitor to a recorder The recorder supports up to 1280 x 1024
168. unctions are required it is recommended to use a mouse in conjunction with the keypad as all recorder functions will then be available Unavailable keypad functions The following keypad buttons are unavailable when using the keypad to control the recorder TruVision DVR 44HD User Manual 143 22BAppendix E KTD 405 keypad Figure 39 Unavailable keypad buttons ZONE 32 PARKING GARAG CX X CAMERA 22 MONITOR IN IAN GO XO OO OO amp 9 Esc diese ses CICI C Ce OOO MwA CX IIS QONA CX DSC VCR Autofocus e Record mode Aux 1 Alarm Store Aux 2 Iris Fast forward Aux 3 Focus 4 Fast backward Aux 4 A Magnification Ist Operating the keypad You can navigate the recorder menus using the keypad buttons and joystick However not all maneuvers are available using the joystick See Table 22 on page 145 for the description of the recorder keypad mapping when using the KTD 405 keypad series See Figure 38 above for a list of the keypad functions that are unavailable when connected to the recorder Example 1 To enter your password in the login window using the keypad 1 In live view mode press esc to activate the Login window 2 Press and hold esc and then press the arrow buttons Co down Cu up Ca left wm right to move the cursor to the Password edit box Once in the password box release esc 3 Press Enter to activ
169. w tour toolbar Starts recording the shadow tour Saves the shadow tour Starts the selected shadow tour Deletes the selected shadow tour 4 Preset tour toolbar Adds a step to a selected preset tour Starts the selected preset tour Stops the selected preset tour Deletes all the preset tour steps Scroll up the list Scroll down the list SMEOOOOOES To set up a preset 1 From the menu toolbar click Camera Setup gt PTZ Preset Tours 2 Use the directional Zoom focus and iris buttons to position the analog camera in the desired preset location 3 Check Save Preset and enter a preset number The preset is enabled and stored in the camera 72 TruVision DVR 44HD User Manual 9BChapter 10 Camera setup If the desired preset number is larger than the 17 numbers listed click The Preset window appears Select a preset number from the dropdown list and click the OK button to save changes Note Presets can be overwritten 4 Click Exit to return to live view To call up a preset la From the menu toolbar click Camera Setup gt PTZ Preset Tours 2 Check Call Preset and enter the preset number to call up The camera immediately moves to that preset position 3 Click Exit to return to live view To delete a preset 1 From the menu toolbar click Camera Setup gt PTZ Preset Tours 2 From the preset list select a preset number and click to delete the selected the preset 3 Click Exi
170. ween1 to 65535 The default value is 554 The total outgoing bandwidth limit is a threshold you can set to limit the amount of outgoing bandwidth that is being handled by the recorder 19 Click Apply to save the settings and Exit to return to live view PPPoE settings Although not usually used you can connect the recorder directly to a DSL modem To do this you need to select the PPPoE option in the network settings Contact your ISP to get the user name and password To configure PPPoE settings 1 From the menu toolbar click Network Settings gt PPPoE Check the enable PPPoE box 2 3 Enter your user name and password and confirm the password 4 Click Apply and manually reboot the recorder to save the settings 78 TruVision DVR 44HD User Manual 10BChapter 11 Network settings DDNS settings DDNS servers allow you to connect to your recorder using a fixed address This fixed address needs to be registered with a DNS service The DDNS setup menu allows you to enable or disable DDNS and to configure it using ezDDNS No IP or DynDNS Note Some service providers block the default RTSP streaming port 554 used for video streaming so if you are not receiving video images over the internet you may need to change it to another value See Appendix C Port forwarding information on page 137 for more information See Port forwarding information in the appendix for more information There are three DDNS provider
171. well Time When the alarm stops cycling of the images stops and you return to live view mode Enable Alarm Audio Trigger an audible beep when a line crossing detection alarm is detected Notify Alarm Host Send an exception or alarm signal to remote management software when a line crossing detection alarm occurs TruVision DVR 44HD User Manual 65 9BChapter 10 Camera setup Send Email Send an email to a specified address when there is a line crossing detection alarm Note You must configure email settings before enabling this option See E mail settings on page 81 for further information If you want to send the event snapshot together with the email check the Attached Snapshot option Upload Snapshot to FTP Capture the image when an alarm is triggered and upload the picture to NAS or FTP server Note To upload the snapshot to NAS you must first configure the NAS settings See Add a network storage system on page 109 for further information To upload the snapshot to an FTP you must first configure the FTP settings See Configure an FTP server to store snapshots on page 82 To upload the snapshot to FTP and NAS when motion detection or an alarm input is triggered you must also enable Upload Snapshots to FTP under the alarm input actions See Alarm notification types on page 93 for further information Trigger Alarm Output Trigger external alarm outputs when an event occurs Check Select All
172. work A steady GREEN light indicates that the recorder is currently connected to a network No light indicates that the recorder is not connected to any network Internal A steady GREEN light indicates that the recorder is currently recording video audio A steady RED light indicates internal health failure Alarm A steady RED light indicates that there is a sensor Alarm In A steady GREEN light indicates no alarm Table 3 Front panel button functions by task Task Live view mode Playback mode Pause mode PTZ control mode 20 Button Direction Enter EJ Reverse vi Pause E Play Live Seq Menu Direction Enter EM Reverse vi Pause ES Play Direction Direction Zoom Preset Tour Button function Press to cycle through channels Press to show the PTZ control toolbar Press to play the earliest video file of the current camera upper left video tile if in multiview mode Press to freeze the last image of the live display for all active cameras displayed Press to play 24 hour playback of the current camera upper left video tile if in multiview mode Press to switch to live view mode Press to start stop sequencing cameras on the current monitor Hold the Seq button for three seconds to start and stop sequencing Press to enter the main menu The left and right buttons are used to speed up and slow down recorded video The up and down buttons are used to jump recorded video

TruVision DVR 44HD User Manual

Contents

Download Pdf Manuals

Related Search

Related Contents