turbotwist-instructions
Contents
1. together when screwing the threaded TANK back into place PLACE ON BRACKET 4 Attaching the hose lock nuts Snap the main body into the bracket indicated by a click Snap the other bracket with the Position the hose lock nuts on the Use flexible tubing to connect the sterilizer to the water suction cup in the same way hose barb inlet and outlet supply Turn the hose lock nut counter clockwise to tighten flexible tubing onto the hose barb Hose lock nuts require HOSE LOCK NUT only hand tightening Note Do not use O ring when larger SNAP IN D hose barbs being used FLEXIBLE TUBING Hose barb adapter installation al Place the O ring on Hand tighten the hose Use flexible tubing to connect the sterilizer hose barb inlet outlet barb adapter onto the to the water supply Turn the hose lock nut Turbo Twist counter clockwise to tighten flexible tubing onto the hose barb SAATIN een O RING HOSE BARB ADAPTER O RING For horizontal positioning take the suction out and snap the main body into the brackets until it locks with a click gt gt D FLEXIBLE TUBING Note Water will leak if the O ring is not in place AMARE HOSE LOCK NUT 2 UVC Lamp installation 5 Installing the Turbo Twist THREADED CAP UVC LAMP Remove threaded install UVC Hang the unit using the o Horizontal Positioning lamp in2. TURBO TWIST UV STERILIZER 12 Month Limited Warranty WHAT THE WARRANTY COVERS Central Aquatics Company warrants this product see Exclusions below to the original purchaser against defective material and workmanship that occurs during normal use for 12 months from the date of original purchase Company will at Company s option either repair or replace product or part without charge but no cash refunds will be made EXCLUSIONS 1 Damage resulting from accident misuse abuse lack of reasonable care subjecting the product to any but the specified electrical service other than normal and ordinary use of the product subjecting the product to abnormal working conditions or any other failure not resulting from defects in materials or workmanship 2 Damage resulting from modification tampering with or attempted repair by anyone other than the Company 3 Transfer of product to someone other than the original consumer purchaser 4 UVC lamp is not covered under warranty WHAT YOU MUST DO TO ENFORCE WARRANTY 1 Contact the Company by mail or telephone to obtain support under warranty Central Aquatics 5401 West Oakwood Park Drive Franklin WI 53132 E mail info central aquatics com Tel 800 255 4527 Fax 414 421 3530 2 Deliver mail or ship the product together with a copy of the original bill of sale to Central Aquatics 5401 West Oakwood Park Drive Franklin WI 53132 Attn Tech Dept You must pay any po
3. BALLAST TURBO TWIST BRACKET y TANK BRACKET SUCTION CUP HOSE LOCK NUT HOSE BARB ADAPTER A OSE H BARB INLET The Coralife Turbo Twist Ultraviolet Sterilizers are easy to set up and operate Please read all instructions in their entirety before installation To accommodate your new sterilizer you will need a power head pump or canister filter with an appropriate flow rate for the size of your UV Sterilizer to ensure adequate ultraviolet exposure while treating the entire volume of aquarium water with appropriate frequency INSTRUCTIONS SAFELOCK QUARTZ HOUSING 1 Set up and positioning Adjusting the hose barb inlet and outlet The hose barbs can be positioned in four different locations to facilitate connections to other applications QUARTZ SLEEVE Lift the red safelock and unlock the quartz housing Picture 1 SAFELOCK PICTURE 1 QUARTZ HOUSING O RING GASKET MAIN BODY Carefully twist the quartz housing and the main body opposite of each other Picture 2 PICTURE 2 MAIN BODY QUARTZ HOUSING The quartz housing can now be rotated 360 Picture 3 s i SPECIFICATIONS Article Turbo Twist 3x Turbo Twist 6x Turbo Twist 12x UVC Lamp 9 watt 18 watt 56 watt Rated Voltage 120 120 120 Rated Cycle Rated Power 2 10 2 watt 2 19 watt 2 58 watt Irradiation
4. er water flow has been established tilt the unit and let the air bubbles inside the tubing and the main body escape Examine the unit and check for any leaks Slide the quartz sleeve out of the ee main body Picture 3 8 Power up Turbo Twist PICTURE 3 QUARTZ SLEEVE Connect the Turbo Twist to the power supply Verify that the UVC lamp is working properly indicated by the light blue glow emitted Wipe the quartz sleeve using a soft Once clean reinstall the quartz sleeve through the lamp on indicator The light from the lamp on damp cloth Do not use household into the main body and push the red indicator will not affect the skin or the eye LAMP ON cleaners or abrasive scrubbers to safelock into the lock position INDICATOR clean the quartz housing CAUTION CAUTION Never look directly at the unshielded lamp as ultraviolet Never look directly at the unshielded lamp as ultraviolet radiation is harmful radiation is harmful Disconnect the UV Sterilizer from the power supply when Disconnect the UV Sterilizer from the power supply when installing or performing maintenance installing or performing maintenance Never submerse the UV Sterilizer in water Never submerse the UV Sterilizer in water WARNING Troubleshooting The plug is not connected to e Connect the plug to the the power supply power supply UVC Lamp UVC lamp base is loose Pu
5. of UVC Radiation 9 580 uW cm 11 400 W cm 11 400 W cm Wavelength of Radiation 255 7 253 MM 253 MM Life of UVC Lamp Aquarium Volume Approx 8 000 hrs Up to 125 gals Approx 8 000 hrs Up to 250 gals Approx 8 000 hrs Up to 500 gals Flow Rate gallons per hour 100 200 gph 200 400 gph 400 1200 gph Size of O ring mm 12 16 16 22 16 22 22 28 16 22 16 28 Cord Length Approx 9 ft Approx 9 ft Approx 9 ft cvalue 20mm distance from the UVC lamp Adjust the orientation of the hose barb and set the main body into the quartz housing Combine the main body with the quartz housing and rotate according to the arrowhead close Picture 4 Press in the red safelock and the UV Sterilizer is now ready to install Picture 5 MAIN BODY PICTURE 3 PICTURE 4 J l Jii SAME AS PICTURE PICTURE 5 Bracket Installation 3 Reassembly Adjust the tank bracket so that it hangs Slide the Turbo Twist bracket onto the tank on the outside of the aquarium bracket Make sure the Turbo Twist bracket is securely fastened onto the tank bracket Make sure that the flat O ring gasket is RANGE OF THE CLAMP properly positioned inside the threaded TURBO TWIST i i it O RING GASKET ai Note The plug and cord should be turned
6. sh the UVC lamp onto the is not working socket until a click is heard The lamp has expired e Replace the UVC lamp Please read instructions in their entirety before using the UV Sterilizer Cut off the power immediately if water enters into the quartz housing Cut off the power and stop using if the UV Sterilizer was submersed or dampened by water The hose lock nut is loose Tighten the hose barb or the Water leak hose lock nut between the A main body and hose lock nuts The O ring is not in place Install the O ring Cut off the power if there is a burning or smoking smell UVC LAMP REPLACEMENT The UVC lamp has a useful life of about 12 months To ensure effective performance replace the UVC lamp once per year Never connect the sterilizer to the power outlet while hands are wet A SEEN Do not pull cord to disconnect power supply Never look directly at the unshielded lamp as the ultraviolet radiation emitted from the lamp can be harmful How to replace the UVC lamp Disconnect the sterilizer from the power supply It is also necessary to disconnect the power to the water pump Though the Turbo Twist is water resistant it should never be intentionally submersed in water Always install the sterilizer location where there is little likelihood of flooding or water dripping onto the UV Sterilizer Always lea
7. stage shipping charges insurance costs and other expenses to return the product to Central Aquatics Franklin WI However if the necessary repairs are covered by the warranty Company will pay the return shipping charges to any destination within the United States or Canada LIMITATION OF IMPLIED WARRANTIES AND EXCLUSION OF CERTAIN DAMAGES THE COMPANY DISCLAIMS LIABILITY FOR INCIDENTAL AND CONSEQUENTIAL DAMAGES FOR BREACH OF ANY EXPRESS OR IMPLIED WARRANTY INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY WITH RESPECT TO THIS PRODUCT THIS WRITING CONSTITUTES THE ENTIRE AGREEMENT OF THE PARTIES WITH RESPECT TO THE SUBJECT MATTER HEREOF NO WAIVER OR AMENDMENT SHALL BE VALID UNLESS IN WRITING SIGNED BY THE COMPANY Some states do not allow the exclusion or limitation of consequential damages so the above limitation or exclusion may not apply to you TURBO TWIST UV STERILIZER Instructions Please read these instructions in their entirety before attempting to use this product EPA Estab No 073048 CA 00 Coralife A product of Central Aquatics Division of Central Garden amp Pet Franklin WI 53132 800 255 4527 Coralife is a registered trademark of Central Garden amp Pet 2009 Central Garden amp Pet PARTS DIAGRAM THREADED CAP HOSE BARB ADAPTER FLAT O RING UVC LAMP QUARTZ HOUSING OUTLET HOSE LOCK NUT x Water pump not included LAMP ON INDICATOR O RING GASKET E PLUG
8. to socket until lamp clicks Turbo Twist bracket and Attach Turbo Twist bracket with screws on into place suction cup on the outside aed of the aquarium Adjust the tank bracket to secure the Turbo Twist UV Sterilizer AQUARIUM MAINTENANCE To ensure superior performance the quartz sleeve should be cleaned periodically 6 Water flow outlet connection Connect the tubing between the water flow CANISTER outlet and the hose barb FILTER Cleaning the quartz sleeve t is recommended that a prefilter be used with the 1 Disconnect UV Sterilizer from Turbo Twist to limit the amount of debris entering HOSE BARB a INLET the sterilizer outlet turn off the pump and let water drain from Turbo Twist Warning WATER FLOW Never install a 2 lt Lift the safelock and unlock the quartz housing Picture 1 SAFELOCK between the main body and the aquarium HOSE BARB INLET QUARTZ HOUSING Note Make sure that the tubing is not carrying the weight WATER FLOW f of the Turbo Twist UV Sterilizer Use the Turbo Twist brackets 2 Carefully twist the quartz housing H d to support the unit and the main body opposite of a each other Picture 2 PICTURE 2 7 Start water flow MAIN BODY SAFELOCK Turn on water supply to the Turbo Twist Once prop
9. ve a drip loop in the power cord to prevent water from running down the length of the cord and reaching the power outlet Remove the threaded cap to Unplug the UVC lamp out of the main body uncover the lamp socket and allow to cool Make sure that appropriately sized hose lock nuts are positioned on hose barbs before attempting to connect tubing The water temperature flowing through the UV Sterilizer should be below 105 F 40 C UVC LAMP e Once cool pull the UVC lamp out of the socket Be careful not to touch the lamp as it may be hot Make sure that the pins of the lamp plugs into the socket indicated with a click Only a 120V 60 Hz electrical source should be used with the Turbo Twist Always disconnect the UV Sterilizer from the power supply before shutting down the flow of water to prevent overheating Reassemble the Turbo Twist 7 Coralife Turbo Twist UV Sterilizer Flow Rates Suggested Tubing Connections UVC ae uw sec cm 55 gp _ TM Parasites Turbo Twist 3x gallon hour UVC uw sec cm gp a Parasites Turbo Twist 6x PUMP gallon hour UVC mat 295 i uw sec cm gp Parasites Turbo Twist 12x 1060 1200 1340 1480 1620 gallon hour
Download Pdf Manuals
Related Search
turbotwist instructions