User Manual Slidekamera X-HEAD 2D Remote Controlled Head
Contents
1. order to achieve gentle stop let go of the joystick when the head is in motion the joystick comes back to the neutral position NOTE Deflecting joystick in the opposite direction will terminate the gentle stop the head will instantly stop and Start to rotate in the opposite direction 4 5 SAVE buttons memory banks The controller is equipped with three memory banks that allow to store and playback the information about the motion Every memory bank stores three movements of both axes Maximum recording times are respectively 3m 20s 1m 40s 1m 40s The recordings are stored in permanent memory they are not deleted after the power is switched off or the safety coupling is disconnected Slidekamera X HEAD 2D Remote Controlled Head To activate a recording from a particular memory bank hold the appropriate SAVE button for a moment gt 0 7s button light flashes The recording starts when the joystick leaves the neutral position Pushing the flashing SAVE button again ends the recording To playback the movement push the appropriate SAVE button the light turns on It is possible to correct the speed range SPEED knob and to set the speed with the use of joystick so called mixing during the playback Pushing the appropriate SAVE button again ends the playback Possible options of SAVE buttons lights E turned off memory bank disabled M turned on playingback the stored movement m flashes recording the movement 5 Te2. 75mm 100mm socket X HEAD 2D remote controlled head can be mounted on camera cranes equipped with 75mm 100mm bowl with the use of leveling half ball or rigidly with the use of Slidekamera HSZ 2 quick mounting screw Examples of mounting the head on the crane equipped with 75mm socket Slidekamera 75mm or 100mm leveling half ball 1 Camera crane bracket with 75mm socket 2 X HEAD 2D remote controlled head 3 Bracket bottom position head reversed Bracket bottom position Bracket upper position Bracket upper position head on the top head on the top head reversed 3 2 Mounting accessories and cabling system To connect the head with the controller use a steering cable Additionally connect the head with a power source Cables that run between remote controlled head and the controller or cables that control the camera photo camera are attached to the arm of the crane with velcro Straps Slidekamera X HEAD 2D Remote Controlled Head 4 Working with X HEAD 2D remote controlled head To operate X HEAD use the controller connected to the head with steering cable Basic features of the X HEAD controller M intuitive controls speed of the rotation is linearly proportional to the joystick deflection M wide range of speeds that can be changed very smoothly M rotation direction can be changed for each axis separately v smooth regulation of gentle start stop M possibility to disable the gentle start M 3 memory banks to s
3. User Manual Slidekamera X HEAD 2D Remote Controlled Head Pdf version of the manual available for download www slidekamera com slidekamera Lat MADE IN EUROPE 1 2015 Before you start your work with Slidekamera X HEAD 2D remote controlled head we strongly recommend to read the manual carrefully Please note that using the head in a manner inconsistent with the manual can cause damage or malfunction the manufacturer is not responsible for Table of contents Mo A A 2 LOU 2 21 ATIEAD CONO diari 2 VAC PR EE EE EE 3 A dd AREN ce scenes E ce ote E needa ees A 3 1 Mounting X HEAD on camera cranes equipped with 75mm 100mm SOCKekt cccoccccocccnnnccncncnnrncnnoncnnrocnoss A 3 2 Mounting accessories and cabling SS Miura talado 5 4 Working with X HEAD 2D remote controlled NGQC ssseesesesesrsererererersrsrererrn ene en rear area RAR ARA AR AREA ARA ARA 6 AR RR e 6 5 SPEED UA A 6 MORE VERSE DUDAS lio 6 mm n 6 4 9 SAVEDUHONS Memory baia 6 A dee aa 7 6 Mamtenance and MON rotas T 1 T S OT Wara eese A ESANERA RINNER T Slidekamera High Engineering Technology CNC s c Sebastian Pawelec Karol Mikulski Glina 45 82 522 Sadlinki Vat Identification Number 581 188 33 32 Slidekamera Office 80 175 Gda sk Poland UI Kartuska 386 tel fax 48 58 710 41 04 e mail biuro slidekamera pl office slidekamera com www slidekamera pl www slidekamera com Slidekamera X HEAD 2D Remote Controlled H
4. chnical specification Weight Head dimensions Head load capacity Maximum size of the camera photo camera Range of head rotation angles Maximum rotation speed Maximum acceleration Supply voltage Battery working time Operating temperature range Recommended relative humidity 4kg 345 x 288 x 109mm 8 kg width 280mm height 300mm in the X axis and Y axis N x 360 73 s 360 4 9s 264 sh2 10 17V DC max 40W 12V 7Ah min 3h 20 40 C do 90 6 Maintenance and operation X HEAD 2D remote controlled head does not need any additional service or lubrication of the components Maintainance procedures are reduced to keeping the equipment clean 7 Terms of warranty All Slidekamera products are covered manufacturer s warranty for a period of 12 months from the date of sale Warranty covers any design faults or of the material of the product which resulted in the product malfunctioning The warranty covers the repair or if the repair proves impossible replacement of the product with a new one Hovewer the cost of repair of the product cannot overrun the catalogue value of the product The warranty does not cover damage and or product defects resulting from the improper usage as well as not following product maintenance specifications The warranty excludes unauthorized attempts to repair or modify M mechanical damage caused during transport and operation of such features as scratches dents pits di
5. ead 1 Elements of X HEAD 2D head Once you receive the shipment please make sure that allthe elements of Slidekamera X HEAD 2D are inside Set includes M X HEAD remote controlled head M X HEAD controller M steering cable 5 meters M 1 4 camera head screw M 3 8 camera head screw M AC adapter v EXPLORER transport case with foam insert M user manual 2 Construction 2 1 X HEAD controller Joystick and the knobs are located on the front panel of the controller Electric connectors sockets and the power switch are located on the side wall of the controller housing Ae AG joystick 1 JAN SAVE buttons 2 q EA REVERS buttons 3 i RAMP knobs 4 SPEED knobs 5 i power switch 6 motors socket 7 slidekamera T3 1 4 mounting hole 9 2 2 Head Thanks to the use of worm gears 1 and steering that maintains steady speed regardless ofthe load the head does not require precise balancing Compact and cased construction ensures long and problem free operating Mounting bracket moves up and down allowing to the set the accessories in the rotation axis of the head Four adjustable clamping levers facilitate rigid mounting of the mounting bracket 9 Mounting slot allows to move the accessories forward andbackward Accessories are mounted on the mounting bracket with the use of 1 4 lub 3 8 screws 3 8 hole in the head base allows to mount iton other devices equipped with 3 8 screw such as cam
6. era cranes tripods Four 4 2mm holes Manfrotto spacing allow to mount X HEAD head directly on Slidekamera 75 100mm half ball equipped with four M4 holes X HEAD base is equipped with holes that allow to lead steering cables through X and Y rotation axis thus allowing to achieve full rotation in both axes without the risk of damaging the cables Slidekamera X HEAD 2D Remote Controlled Head X HEAD is equipped with a TRIGGER socket to connect our device with a photo camera using a proper shutter release cable thus allowing for interval shots synchronized with a slow movement of the head To connect the head with the controller use a steering cable Controller socket 1 Socket for addidtional drives 2 Power socket 3 TRIGGER Shutter release cable socket 4 Driving motor markings LINK Indicates that controller cable is properly connected Rx When orange light flashes slowly the user is informed that the driving motor is powered but has not yet received any command from the controller When orange light starts flashing rapidly this indicates that the driving motor received a command from the controller FAULT Flashing light indicates existing error Possible X HEAD power supply M AC adapter M external battery Slidekamera AF 7 power pack purchased separately Slidekamera X HEAD 2D Remote Controlled Head 3 Mounting 3 1 Mounting remote controlled head on camera cranes equipped with
7. rt etc M flooding moisture To obtain warranty service the purchaser should deliver the damaged product together with a proof of purchase and proof of payment invoice cash register receipt The product will be accepted for warranty service on condition that it is delivered with correctly filled in complaint form and properly protected during transport You can download the complaint from www slidekamera com After the warranty period is exceeded any spare parts can be purchased directly from the manufacturer or in any selected points of sale PLEASE NOTE Any package sent at the expense of HET CNC s c 80 175 Gdansk UI Kartuska 386 Slidekamera X HEAD 2D Remote Controlled Head slidekamera Lt MADE IN EUROPE
8. tore and playback motion trajectory Bank1 3min 20s Banks 2 and 3 1min 40s m possibility to playback the recorded motion from the saved starting point I smooth change of speed of the playbacked trajectory 4 1 Joystick Linear deflection of the joystick corresponds to head rotation speed in a given axis thus making the steering easy and intuitive 4 2 SPEED knobs In order to change the set point speed use the SPEED knob Turning the knob right increases speed and corresponds to the maximum deflection of the joystick Turning the SPEED knob maximally to the left results in turning off the given axis REVERSE button light switches off 4 3 REVERSE buttons In order to change the direction of the rotation use REVERSE buttons Pushing the button for a moment changes the direction of the rotation for a given axis button light changes from green to red or vice versa Pushing the REVERSE button for a longer time gt 0 7s either enables or disables the gentle start for a given axis Disabling gentle startis signalized by REVERSE button flashing Possible options of REVERSE buttons lights M turned off given axis is disabled v green red light on given axis is active gentle start enabled v green red light flashes given axis is active gentle start disabled 4 4 RAMP knobs Use the RAMP knobs to change gentle start stop Turning the knob right extends time of the gentle start stop maximum acceleration for a given axis reduces In
Download Pdf Manuals
Related Search