Persona™ P14W - PDi Communication Systems
Contents
1. 3 Press VOL to select it u Field Powered Hours 4 Press the SETUP button to return to the previous menu To a Firmware VSN exit press SETUP until the programming menus disappear a Micom VSN s Power On Cause Normal Field ON Hours Cumulative time TV is actually on Field Powered Hours Cumulative time TV is powered Firmware VSN 0 64 Micom VSN 0 4 Power On Cause Normal This feature causes the TV to turn off once it reaches the highest numbered last channel and is usually used with single button style pillow speakers When the feature is disabled the TV will continue on to the lowest channel and not turn off Enter the Features menu Press CH A or CH Y to highlight Channel Up Power Off Press VOL lt or VOL gt to select Enabled or Disabled Press SETUP to return to the previous menu To exit press SETUP until the programming menus disappear Po he Channel to Other Source External signal sources connected to the TV such as DVD players or video game systems are shown in the current channel lineup after the highest channel and then shown on the TV Set this feature to Disabled to require the activation of the external sources by pressing the remote s or the TV s TV AV button Set this feature to Enabled to allow access to external devices by pressing channel up or down buttons on a remote or most pillow speakers 1 Enter the Features menu 2 Press CHA or CH Y to highlight Channel to Other Source 3 Press VOL2. to select Enabled or Disabled e DISABLED Service Level Channels only e ENABLED All possible channels 4 Press the SETUP button to return to the previous menu To exit press SETUP until the programming menus disappear PDi Communication Systems Inc 40 Greenwood Lane Springboro Ohio 45066 USA PH 1 800 628 9870 FX 937 743 5664 EES PD p E Persona P14W LCD HDTV Communication Systems Inc Better Solutions Are Within Reach User Manual Page 16 of 21 FEATURES The Features menu provides adjustable settings that customize the TV to your hospital 1 Press the SETUP button 2 Press CHA or CH to highlight Features 3 Press VOLP to enter the Features sub menu Power on Caption Mode Power on Caption Mode memorizes the caption setting upon powering the TV off With this feature set to off the TV will always power on with the captions disabled With this feature set to Last the TV turns on with the last caption setting enabled 1 Enter the Features menu 2 Press CHA or CH to highlight Power on Caption Mode 3 Press VOL lt or VOL to select Last or Off 4 Press the SETUP button to return to the previous menu To exit press SETUP until the programming menus disappear Auto Power On Lock The TV will turn on and stay on whenever electrical power is applied to the set The feature is useful for controlling the TV from a wall switch or preventing the TV from being turned off by the TV power button or the remote contr
3. Y or SETUP to return to the previous menu NOTE After a Service Level is copied the TV returns to the Copy Service Level menu If the To Service Level has been set to active in the Service Level setting see Service Levels on page 4 TV programming will appear 6 Press SETUP to return to the previous menu To exit press SETUP until the programming menus dd disappear Copy Service Level Le Parental Control Parental Control allows you to block channels TV shows movies and devices that are connected to the P14W 1 Inthe Channels menu Press CHA CH to highlight Parental Control 2 From the Parental Control menu press VOL to enter the TV Rating menu 3 Press CHV to move to one of the six age based categories 4 Press VOL or VOL to cycle through the sub ratings ALL FV V S L or D or exit out of the sub categories in that category See page 14 for rating guides NOTE The U or B unblocked or blocked will turn red when it is highlighted Press CH A or CH F to change the sub rating 6 Press the SETUP button to return to the previous menu Or press VOL to get out of the sub category a Digital Rating Le a Clear Disital Download New gt pa PDi Communication Systems Inc 40 Greenwood Lane Springboro Ohio 45066 USA PH 1 800 628 9870 FX 937 743 5664 EES PD p E Persona P14W LCD HDTV Communication Systems Inc Better Solutions Are Within Reach User Manual Page 13 of 21 NOTE Ca
4. appear after approximately 15 seconds 6 Press CH A or CH Y to highlight Restore Settings to TV 7 Press VOL P to display a list of previously stored TV setups on the USB Disk Press CH A or CH to highlight the file for the P14 9 Press VOL to select it The TV will shut off and turn back on automatically this takes about 15 seconds 10 Press VOL gt to restore the settings to the TV Screen will turn black and LCD light will flash red during this process Once process is complete LED light will change to blue and TV will return to the Cloning Main Menu with verification of Successful cloning go PDi Communication Systems Inc 40 Greenwood Lane Springboro Ohio 45066 USA PH 1 800 628 9870 FX 937 743 5664 MX PD p E Persona P14W LCD HDTV Commun ication Systems Inc Better Solutions Are Within Reach User Manual Page 21 of 21 Firmware The firmware for the model PDI P14W is field upgradeable but normally does not require this process and should be performed by the hospital technician A special data file is required from the PDi factory to complete this process The file is posted on PDi Communication s web site http www pdiarm com Firmware files are written to the root directory of a blank USB Flash Drive connected to the TV s Cloning port and updated using the TV s menus Once complete the TV settings must be reprogrammed Limited Warranty PDi Communication Systems Inc PDi warrants to t
5. lt or VOL gt to select Enabled or Disabled 4 Press SETUP to return to the previous menu To exit press SETUP until the programming menus disappear Power on ARC Mode The TV powers on with a set screen sized aspect ratio of 4 3 14 9 16 9 16 9 Panorama or Last 1 Enter the Features menu 2 Press CHA or CH Y to highlight Power On ARC Mode 3 Press VOL to select 4 3 14 9 16 9 16 9 Panorama or Last 4 Press SETUP to return to the previous menu To exit press SETUP until the programming menus disappear Standby Power Controls power used by TV when in Standby or OFF stage Press the SETUP button on the remote control Press CH A or CH Y to select Features Press VOL or VOL gt to select it Press CH A or CH to select Standby Power Press VOL lt or gt to select Low Normal Note Ifin low mode TV consumes less power but takes longer to start when turned back on Press the SETUP button to return to the previous menu To exit press SETUP until the programming menus disappear PER oe hy H PDi Communication Systems Inc 40 Greenwood Lane Springboro Ohio 45066 USA PH 1 800 628 9870 FX 937 743 5664 MX PD p E Persona P14W LCD HDTV Communication Systems Inc Better Solutions Are Within Reach User Manual Page 19 of 21 OSD LANGUAGE On Screen Display You can select the language you wish to use in your on screen displays Press SETUP Press CHA or CH Y to select the OSD Languag
6. or a single button analog switch style pillow speaker A rear panel mounted switch allows use of different brands of pillow speakers Zenith Philips and RCA compatible pillow speakers ACROSS ROOM WIRING WARNING DO NOT connect the pillow speaker circuit Common to earth ground Grounding of the Common will defeat the isolation circuitry of the TV and possibly expose the patient to harmful shock currents should a wiring fault occur PDi Communication Systems Inc 40 Greenwood Lane Springboro Ohio 45066 USA PH 1 800 628 9870 FX 937 743 5664 MX PD p E Persona P14W LCD HDTV Communication Systems Inc Better Solutions Are Within Reach User Manual Page 6 of 21 PROGRAMMING MENUS AND SETUP PROGRAMMING Note A programming remote control is required to perform all setup operations for the television The programming remote Part Number PD108 420 is NOT packaged with the TV and must be ordered separately The following instructions assume you have a programming remote have correctly mounted the TV and connected a coax cable that provides both power and RF signal SERVICE LEVEL This TV offers a disable and three different programmable Service Levels Free Basic and Premium Only one Service Level is usable at a time Disabled is like a mechanical key lock when in Disabled service level the TV can be turned OFF and ON but cannot be used for viewing A standard message appears on a black screen SETUP MODE Fr
7. other rights which vary from state to state PDi s liability under this warranty is limited to repair or replacement of defective products and parts as provided above PDi shall not be liable for incidental or consequential damages The warranty contained herein is in lieu of all other expressed or implied warranties including any implied warranty of merchantability or fitness for any particular purpose PDi neither assumes nor authorizes any person to assume on its behalf any other obligation or liability Some states DO NOT allow the exclusion of limitation of incidental or consequential damages or a disclaimer of warranties implied by law so the above limitation or exclusion may not apply The information and technical data in this manual is believed accurate but is not warranted and is subject to change without notice or obligation PDi and Better Solutions Are Within Reach are registered trademarks of PDi Communication Systems Inc PDi Communication Systems Inc 40 Greenwood Lane Springboro Ohio 45066 USA PH 1 800 628 9870 FX 937 743 5664 MX
8. sons tio iii io eielii 18 E PP o o E OE AN A A 18 OSD LANGUAGE On Screen Display Jericsninin a E EA EAE AA 19 TK D 19 coh idol ag EE 19 CLON Gante cinta 20 SEENEN 20 FOS GOL CCU COE rara 20 BDI VV E 21 Brent e AT EE EN PDi Communication Systems Inc 40 Greenwood Lane Springboro Ohio 45066 USA PH 1 800 628 9870 FX 937 743 5664 MX PD p E Persona P14W LCD HDTV Communication Systems Inc Better Solutions Are Within Reach User Manual Page 5 of 21 INSTALLING TELEVISION Installation Precautions 1 Any changes or modifications in construction of this TV which are not expressly approved by the party responsible for compliance could void the user s authority to operate the equipment 2 Use only a power source from a CSA Certified UL WEE Approved Class 2 Power Supply suitable for use in a Health Care Facility This TV will operate on pope either DC or AC voltage range 18 to 32 volts WIRE 3 NOTE TO CATV INSTALLER This reminder is Ser provided to call the CATV system installer s DISCHARGE UNIT attention to Article 820 40 of the NEC that NEC SECTION 810 20 provides guidelines for proper grounding and in particular specifies that the cable ground shall be connected to the grounding system of the building as close to the point of cable entry as practical ELECTRIC SERVICE EQUIPMENT GROUNDING CONDUCTORS NEC SECTION 810 21 GROUND CLAMPS POWER SERVICE GROUNDING ELECTRODE SYSTEM N
9. the Service Level you wish to program The menu displays the current programming status of each level as either Programmed or Blank Press the VOL to choose the service level NOTE A Programmed service level can also be reprogrammed if desired 7 A confirmation menu will appear before proceeding Press Yes A to select YES and start auto programming The TV will now search all available channels with an on screen progress percentage displayed Once complete press the SETUP button to return to normal TV viewing NOTE Any tuning mode that includes Digital channels will require several minutes to complete the auto programming Auto Program Confirm Auto Program a Mode LEAL ENS Digital Only a Confirmation Channel Sequence interleave A D Free Programmed Basic Blank as Premium Blank Position Ad Y Exit SETUP Exit SETUP PDi Communication Systems Inc 40 Greenwood Lane Springboro Ohio 45066 USA PH 1 800 628 9870 FX 937 743 5664 PD p E Persona P14W LCD HDTV Communication Systems Inc Better Solutions Are Within Reach User Manual Page 11 of 21 Add Delete Channels Individual analog TV channels that are missing can be manually added to a Service Level Or analog TV channels that require deletion can be manually removed from a Service Level Digital channels found during Auto Programming can be enabled or disabled in each service level ee a a Se EC From the Channels menu press the CH A CH
10. EC ART 250 PART H FIG A Coax Cable Specifications When using a central power supply cable selection is crucial Due to long coax cable runs encountered in hospital installations coax cable employing a solid copper center conductor and copper shield is required Cable run lengths MUST NOT exceed 150 feet Required coaxial cable numbers include Alpha 9804C non plenum Belden 9248 non Plenum West Penn 806 non Plenum or West Penn 25806 Plenum which have been tested with coax powered TVs Arm Mounting This television is designed to attach to a wall mounted suspension arm adjusted to support a television weighing seven pounds PDI 508C 7 See instructions for PDI 508 series arm part number PD196 090 for mounting of the television to the arm assembly The single coaxial cable on top of the TV is used to supply low voltage AC or DC power 28VAC or 24VDC and the RF signal to the television Note Contact PDi for additional information on arm compatibility and cable requirements DANGER Arm Recoil Hazard The safety brake pin must remain in the SAFETY BRAKE PIN HOLE whenever the television is removed from the arm or when the arm is removed from the wall bracket to prevent the arm from springing open Across Room Wiring A stereo style pillow speaker pendant control jack is located on the TV s connections panel This TV is designed to work with either a digital pillow speaker that generates digital style control codes
11. H Y to highlight Caption Text Modes Press VOL or VOL to select Disabled or Enabled Press SETUP to return to the previous menu To exit press SETUP until the programming menus disappear SO PDi Communication Systems Inc 40 Greenwood Lane Springboro Ohio 45066 USA PH 1 800 628 9870 FX 937 743 5664 MX PD p E Persona P14W LCD HDTV Communication Systems Inc Better Solutions Are Within Reach User Manual Page 17 of 21 Digital Captions Digital Captions Customization of Closed Captions on ATSC QAM channels Font Size Default a Font Style Default a Foreground Color Default 1 Enter the Features menu Background Color Default 2 Press CH A or CH Y to highlight Digital Captions u Edge Color Default Foreground Opacity Default 3 Press VOL gt to select it Tepe dees Default 4 Press CH A or CH Y to highlight the attribute you wish Edge Style Default to change 5 Press VOL P to change it See the table below for the settings of each attribute 6 Press SETUP to return to the previous menu To exit press SETUP until the programming menus disappear Position A Y Exit SETUP Attribute Settings Font Size Small Standard Large Default Font Style Style0 Style 7 Default Foreground Color White Black Red Green Blue Yellow Magenta Cyan Default Background Color White Black Red Green Blue Yellow Magenta Cyan Default Edge Color White Black Red Green Blue Yellow Magenta Cyan Defa
12. PD Communication Systems Inc CHANNEL LIST DA 7 2 DA 9 1 DA 9 2 DA 9 3 DA 12 DA 12 DA 14 DA 14 PDi Communication Systems Inc 40 Greenwood Ln Springboro OH 45066 Toll free 800 628 9870 Fax 937 743 5664 WHIO WX WCPO HD WCPO SD WCPO LN WKAC DT CinCW 14HD 14Prime 14Leam Digital Air 12 1 WKAC DT PM 1 30 PM 2 00 The Bold and the Beautiful The Talk Let s Make a Deal Local 12 News al 4PM Local 12 News al 4 30PM Persona P14W Arm Mounted Healthcare Grade LCD HDTV Model PDI P14W User Manual Document Number PD196 220R2 www pdiarm com ES D 10 11 EZ HIN Communica tion Systems Inc Better Solutions Are Within Reach This symbol indicates that dangerous voltage constituting a risk of electric shock is present within this unit This symbol indicates that there are important operating and maintenance instructions in the literature accompanying this unit Persona P14W LCD HDTV User Manual AN A S CAUTION Document Number PD196 220R2 Page 1 of 21 RISK OF ELECTRIC SHOCK DO NOT Wees O A CAUTION TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER NO USER SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL IMPORTANT SAFETY INSTRUCTIONS THIS INSTALLATION SHOULD BE MADE BY A QUALIFIED SERVICE PERSON AND SHOULD CONFORM TO ALL LOCAL CODES READ AND FOLLOW THE SAFETY INSTRUCTIONS BEFORE ATTEMPTING THI
13. R R Maximum Volume Power on Volume Internal Speaker Enable HDMI 1 Audio Port HDMI 2 Audio Port Composite Sound Mode Headphone Sound Mode 1 Inthe Sound menu press CHA CHY to highlight Composite Sound Mode 2 Press VOL lt VOL gt to choose between settings 3 Press SETUP to return to previous menu Position A Exit SETUP Balance Minimum Volume Maximum Volume 100 Power on Volume Last Internal Speaker Enable gt HDMI 1 Audio Port HDMI 1 HDMI 2 Audio Port HDMI 2 Composite Sound Mode L R Headphone Sound Mode Stereo Headphone Sound Mode The earphone jack sound can be used with either a mono single ear or stereo dual ear style 1 Inthe Sound menu press CHA CH to highlight Headphone Sound Mode 2 Press VOL VOL gt to choose between settings 3 Press SETUP to return to previous menu Position 4 Y Exit SETUP Next lt gt PDi Communication Systems Inc 40 Greenwood Lane Springboro Ohio 45066 USA PH 1 800 628 9870 FX 937 743 5664 PD p E Persona P14W LCD HDTV Communication Systems Inc Better Solutions Are Within Reach User Manual Page 10 of 21 CHANNELS The Channels menu allows you to program different signal sources to either disable or select from three Service Levels Free Basic or Premium and to add or delete individual channels It also allows you to block channels TV programs movies and auxiliary sources that can be input to the TV Each Service Le
14. S INSTALLATION Read these instructions Keep these instructions Heed all warnings Follow all instructions Use only a power source from a CSA Certified UL Approved Class 2 Power Supply suitable for use in a Health Care Facility This TV will operate on either DC or AC voltage range 18 to 32 volts DO NOT attempt to modify this product in any way without written authorization Unauthorized modification could void the user s authority to operate this product DO NOT expose this TV to rain or moisture DO NOT use this TV near water TV SHALL NOT be exposed to dripping or splashing No objects filled with liquids such as vases shall be placed on the TV DO NOT install near any heat source such as radiators heat registers stoves or other apparatus that product heat Use only with the cart stand SE ica or table specified by the manufacturer or sold with the apparatus When a cart is used use caution when moving the cart apparatus combination to avoid injury from tip over DO NOT block any ventilation openings Install in accordance with the manufacturer s instructions DO NOT defeat the safety purpose of the polarized or grounding type plug A polarized plug has two blades with one wider than the other A grounding type plug has 13 14 15 16 17 18 19 two blades and a third grounding prong The wide blade or the third prong is provided for your Safety If the provided plug does not fit in
15. a 5 Installation Preca e sccaruanisssoanop ur re ene E E caera A E N A 5 Coax Cable ee camente ono canas 5 AR MON ina 5 PRCT OS S ROODI VV Brisa ais 5 PROGRAMMING MENUS AND ETS 6 EREM 6 TE e E D Fe DE 6 PICTURE usaras 6 Brightness Contrast Color Tint and Sharpness nccccocononnnmsm race nena 6 Color Temperatur AAA UP A 7 Noce R CIU O y en A E E E 7 DD o o AA E AT E AE AATE 7 Minimum e 7 Maximunt VONE aean EAE EA AE EA EA eens 8 POr On VOM asa 8 Internal Speaker EEN 8 HOM CAUTO PO arna EE E A E E EE 9 Composite sound Mode aero E O o ies 9 Headphone ne Mode said ion 9 CHANNEL PAP EE EEE 10 Eege 10 AUTO EE 10 Add Delete Ee E iini Ea E a E eE E E EE E E 11 RI Servico Leve lesa tos 11 COPY SCrVIcO Levels oa 12 Parental CONO ME 12 Eeer 13 PDi Communication Systems Inc 40 Greenwood Lane Springboro Ohio 45066 USA PH 1 800 628 9870 FX 937 743 5664 MX PD p E Persona P14W LCD HDTV Better Solutions Are Within Reach User Manual Page 4 of 21 A aa 13 Tete VISION Rato NCS ron 14 EE TAM CB nr 15 Parental Lock Duration E 15 Pe O E aa EE E AE E EE 15 POWeron Chin nt aa 15 Aral We AAPP 15 Channel Memnmbr Re TE 15 FEATURE ella 16 POWer 6 Cap On Mode ora 16 AUTO Lower On Eeer 16 hatte e eg Bn KEE tad 16 PP OE E OU eee ere nee ee eer teem eee ee eee ee er er eee mere ree 16 ATEN WK age 16 EE 17 Disital Mode Lime Sell ici 17 RE eg 18 Channel Power A GE 18 Chanel to Other SOC 18 Ponor On ARG MOA
16. at have a Welcome Channel and wish to have it displayed upon initial use of the TV The patient can then tune to any other available channel Enter the Channels menu Power On Channel Press CH A or CH Y to highlight Power on Channel Press VOL gt to select it o E oy A Aa E Press CH A or CH Y to highlight the desired Service Level 7S a Last Free Basic or Premium m Premium Service Level Last 5 Press VOL lt or VOL gt to select one of the channels currently available in the Service Level or Last NOTE Last will cause the TV to turn on to the last channel before it was turned off 6 Press the SETUP button to return to the previous menu To exit press SETUP until the programming menus disappear Channel pa A Channel Lock Locks the currently viewed channel and prevents patients from tuning to any other channel This feature is useful when the TV is used for information display purposes 1 Enter the Channels menu Exit SETUP 2 Press CH A or CH Y to highlight Channel Lock 3 Press VOL lt or VOL gt to select Enable or Disable 4 Press the SETUP button to return to the previous menu To exit press SETUP until the programming menus disappear Position d Y Channel Memory Override Allows a channel to be entered with the remote s number buttons that is not memorized in the current Service Level 1 Enter the Channels menu 2 Press CH A or CH Y to highlight Channel Memory Override 3 Press VOL lt or VOL gt
17. e menu Press VOL or VOL P to select your desired language Press SETUP to return to the previous menu To exit press SETUP until the programming menus disappear ae ee a weg The TV s signal sources can be individually Enabled or Disabled a TV Enabled APO The available sources in this menu correspond with the Composite Video Enabled APO j s HDMI 1 Disabled components you have connected to the TV s connectors HDMI 2 Disabled u PC ANALOG Component Disabled NOTE Please disable all of the TV s sources that are not to be ER Disabled e s Power On Source TV used A TV that is switched to a non connected source generates nuisance hospital maintenance calls of TV Not Working when in fact the TV does work but has been set to an inactive source 1 From the SETUP menu press CH A or CH Y to highlight Source 2 Press VOL lt or VOL P to select it Press CHA or CHY to highlight a desired source 4 Press VOL lt or VOL gt to change the source status to either Disabled or Enabled APO Auto Power Off NOTE Sources that are grayed out are not installed in the TV Enabled APO means the TV will turn off if there is no video 5 Press SETUP to return to the previous menu To exit press SETUP until the programming menus disappear Position Y Label TV AV Exit SETUP Next lt gt a Power on Source The TV can be preset to power on to a selected source Enter the Sources menu Press CHA or CH highlig
18. ee lets patients watch hospital education and information channels i E d Service Level without renting the TV The channels containing programming for no charge Picture are typically programmed into this level of service This is the factory default z BEE setting for service level Features e OSD Language a Sources Basic service typically allows additional channels beyond those offered in FM Radio the FREE level RF Cloning Premium is the highest Service Level with typically the most channels available for viewing Position A Exit SETUP 1 Press the SETUP button to display the SETUP MODE menu 2 Press the VOL to disable or select desired service level Free Basic Premium PICTURE Adjustment of picture Brightness Contrast Color Tint Color Temperature and Sharpness is available to customize the levels you prefer using the on screen menus Brightness Contrast Color Tint and Sharpness These settings have a range of 1 100 To change one of them simply change the number by following this process 1 Press the SETUP button to display the SETUP MODE menu 2 Select the Picture menu item 3 Press the CHA CHY buttons to highlight the desired picture item Service Level Brightness 45 gt Contrast 80 Brightness Contrast Color E 60 Color Temperature Sharpness Channels SE a lt e e gs Features E olor L emperaure and Noise Reduction Sap oa Sharpness 60 4 Adjust the pictu
19. he original purchaser only that the PDI P14W will be free from defects in materials and workmanship under normal use for 2 years from the date of original purchase This warranty does not cover any other equipment that may have been included with PDI s shipment of this product After receipt of written notice of a defect or malfunction occurring during the warranty period PDi will repair or replace goods returned to its Springboro Ohio location at its discretion free of charge to the original purchaser the whole or any component part of any product manufactured by PDi and found by PDi to be defective As a condition to obtaining warranty service written notification must be received by PDi within at least ten 10 days after defect is first observed Repair of said product requires it to be shipped to the PDi factory in Springboro Ohio All shipments shall be F O B Springboro Ohio and all shipping and freight charges to PDI s factory shall be paid by the customer This warranty shall not apply to any PDi products subjected to improper use negligence or accident nor to tampering alterations or repairs by others without PDi s specific prior written authorization For information regarding authorized servicing and all other information pertaining to this warranty please contact PDi Communication Systems Inc at 40 Greenwood Lane Springboro Ohio 45066 or phone 800 628 9870 This warranty gives specific legal rights and you may also have
20. ht Sources Press VOL to select it Press VOL or VOLP to change to the source that you want the TV to power on to NOTE The source must be enabled before it can be chosen as a power on source The Last entry causes the TV to power on to the Last source selected 5 Press SETUP to return to the previous menu To exit press SETUP until the programming menus disappear O PDi Communication Systems Inc 40 Greenwood Lane Springboro Ohio 45066 USA PH 1 800 628 9870 FX 937 743 5664 MX PD p E Persona P14W LCD HDTV Better Solutions Are Within Reach User Manual Page 20 of 21 CLONING Cloning allows quick programming of a TV from a USB Flash Drive The operation involves first downloading setup information from a programmed host TV to an USB Flash Drive and then uploading the setup information to another TV Cloning can also be used to re program a programmed TV Save Settings to USB 1 Turn on the TV 2 Inserta blank USB thumb drive into the cloning port A Cloning Main Menu will appear on the TV screen 3 Press CHA or CH Y to highlight Save Settings to USB 4 Press VOL to display the Save Settings to USB menu Save Settings to USB Restore Setting to TV 1 Press SETUP on the programming remote PD108 420 2 From the SETUP menu press CH A or CH Y to highlight Cloning 3 Press VOL to select it m Restore Settings to TV 4 Cloning menu will appear 5 Follow prompts on Cloning menu Cloning Main Menu will
21. iolence Scenes General Audience Considered suitable for all audiences children may watch Parental Guidance Parents Strongly Cautioned Mature Audience Only Meaning Fantasy Violence Violence Sexual Situation Adult Language Sexual Suggestive Dialog 7 OT Di lt le Grade General Audiences PG Parental Guidance Suggested PG 13 Parents Strongly Cautioned Restricted Viewing No Children under age 17 NC 17 Hard Core Films N o Rating unattended Suggested Unsuitable for younger children may contain Suggestive Dialog Bad Language Sex and Violence Scenes Unsuitable for children under 14 may contain Strong Dialog Bad Language Sex and Violence Scenes Adults only may contain Strong Dialog Bad Language Sex and Violence Scenes Meaning Content not offensive to most viewers Content is such that parents may not want their children to view the program Program is inappropriate for preteens with a greater degree of offensive material suggested than a PG rated program Not for children under age 17 Strong elements of sex and or violence Not for children under age 17 under any circumstances Strong sexual content Same as NC 17 rating MPAA not rated PDi Communication Systems Inc 40 Greenwood Lane Springboro Ohio 45066 USA PH 1 800 628 9870 FX 937 743 5664 MX PD p E Persona P14W LCD HDTV Communication Systems Inc Better Solutions Are Within Reach User Manual Page 15 of 21 Au
22. nel Memory Override Enabled Pro Idiom MTI Port e Position A Y Exit SETUP Exit SETUP Clear Service Level This empties a service level of all its programmed channels leaving it blank 1 La 3 vt Confirm Clear From the Channels menu press the CH A CHY to highlight Clear Confirmation Service Level Press VOLP to select Press CHA CHY to highlight the Service Level Free Basic or Premium Press VOL to select the highlighted Service Level A confirmation page will appear Press Yes A to proceed Press V or SETUP to return to the previous menu NOTE After a Service Level is cleared the TV returns to the Clear Service Level menu Blank will appear to the right of the Service Level Press SETUP to return to the previous menu To exit press SETUP until the programming menus disappear Exit SETUP PDi Communication Systems Inc 40 Greenwood Lane Springboro Ohio 45066 USA PH 1 800 628 9870 FX 937 743 5664 PD p E Persona P14W LCD HDTV Communication Systems Inc Better Solutions Are Within Reach User Manual Page 12 of 21 Copy Service Level This copies one service level s channels to another In the Channels menu Press CHA CH to highlight Copy Service Level Press VOLP to select Press CH A to set the From Service Level Press CH Y to set the TO Service Level Press VOL to copy the Service Level A confirmation screen will appear Press CH A to proceed Press CH
23. net can be turned on or off for each TV Service Level Note Sound to the earphone jack remains on at all times In the Sound menu press CHA CHY button to select the Internal Speaker Enable menu item Press VOL a VOL to enter the menu Press the CHA CHY button to select the desired Service Level Press VOL a VOL to select Disable or Enabled Press the SETUP button to return to the preceding menu A SS a TV Free Service Level Enabled Internal Speaker Enable PDi Communication Systems Inc 40 Greenwood Lane Springboro Ohio 45066 USA PH 1 800 628 9870 FX 937 743 5664 EES PD p E Persona P14W LCD HDTV Communication Systems Inc Better Solutions Are Within Reach User Manual Page 9 of 21 HDMI Audio Ports The HDMI1 Audio Port and HDMI2 Audio Port have two settings HDMI and PC ANALOG Component A device connected to the HDMI ports can receive audio from one of these sources 1 Inthe Sound menu press CHA CHY to highlight HDMI1 or HDMI2 2 Press VOL VOL to choose between HDMI and PC ANALOG Component 3 Press SETUP to return to previous menu Balance 25 Minimum Volume 15 Maximum Volume 100 Power on Volume Last Internal Speaker Enable Leg HDMI 1 Audio Port PC ANALOG Component HDMI 2 Audio Port HDMI 2 Composite Sound Mode L R Headphone Sound Mode Stereo CRW WR oh Position A Y Exit SETUP Balance Minimum Volume Composite Sound Mode The settings are L R L L and
24. o the material disclosed in this user manual This manual is issued for user information only and may not be used to manufacture anything shown herein Copyright 2009 2012 by PDi Communication Systems Inc All rights reserved Manufactured under license from Dolby Laboratories Dolby and the double D symbol are trademarks of Dolby Laboratories Disclaimer The author and publisher have used their best efforts in preparing this manual PDi Communication Systems Inc makes no representation or warranties with respect to the accuracy or completeness of the contents of this manual and specifically disclaims any implied warranties or merchantability or fitness for any particular purpose and shall in no event be liable for any loss of profit or any other damages The information contained herein is believed accurate but is not warranted and is subject to change without notice or obligation Trademarks Manufactured under license from Dolby Laboratories Dolby and the double D symbol are trademarks of Dolby Laboratories All other brand names and product names used in this manual are trademarks registered trademarks or trade names of their respective holder PDi and Better Solutions Are Within Reach are registered trademarks of PDi Communication Systems Inc Springboro Ohio Regulatory Information FCC This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to part 15 of the FCC Rules These limi
25. ol Enter the Features menu Press CH A or CH Y to highlight Auto Power On Press VOL or VOLP to select Disabled or Enabled Press the SETUP button to return to the previous menu AA Inactive Power Off h mm 1 The TV will automatically power off after a specific period of viewer inactivity providing energy savings Enter the Features menu Press CHA or CH Y to highlight Power Management Press VOL or VOL to select an active time or select Disabled to disable this feature Press the SETUP button to return to the previous menu To exit press SETUP until the programming menus disappear NOTE Auto Power On must be set to Disabled for this function to operate EE eS Bed A B The TV can be controlled by a patient IR remote The TV offers Bed A and Bed B selectable codes for independent control of a single television in a two television room The patient remote can be toggled between Bed A and Bed B codes by pressing using a paperclip the CODE button on the remote 1 Enter the Features menu 2 Press CHA or CHY to highlight Bed A B 3 Press VOL or VOL to select A or B 4 Press the SETUP button to return to the previous menu To exit press SETUP until the programming menus disappear Caption Text Modes Teletext can be displayed in addition to Captions Teletext is not normally broadcast in the USA Caption Text Modes should be set to Disabled for TVs operated in the USA Enter the Features menu Press CHA or C
26. one Sound Mode Position Y Exit SETUP 2 Press the VOL l VOL gt to select your preferred minimum volume 3 Press SETUP to return to the preceding menu PDi Communication Systems Inc 40 Greenwood Lane Springboro Ohio 45066 USA PH 1 800 628 9870 FX 937 743 5664 25 15 100 Last pr HDMI 1 HDMI 2 L R Stereo PD p E Persona P14W LCD HDTV Communication Systems Inc Better Solutions Are Within Reach User Manual Page 8 of 21 Maximum Volume Sets the maximum volume level the TV can reach 1 In Sound menu press the CHA CH Y button to select werte een Maximum Volume 2 Press the VOL lt VOLP button to determine your preferred maximum volume allowed 3 Press the SETUP button to return to the preceding menu Power on Volume Sets the initial volume for the TV upon powering on Once the TV is on the volume can be set to any allowable level NOTE If Power on Volume is set to LAST and physical power is removed the TV will power on with a volume of zero 1 In Sound menu press the CHA CH button to select Power on Volume 2 Press the VOL VOL button to determine your preferred volume when the TV turns on Setting the level to LAST causes the TV to remember the last volume level used by the TV prior to turning off 3 Press the SETUP button to return to the preceding menu s Power on Volume Last Internal Speaker Enable The speaker s inside the TV s cabi
27. re item using the Sources VOLA VOLY buttons to the ley deerme Noise Reduction Enabled desired level RF Cloning 5 Press the SETUP button to store the picture values m Li H Y E 5 Position A Position A Y Next Exit SETUP Exit SETUP PDi Communication Systems Inc 40 Greenwood Lane Springboro Ohio 45066 USA PH 1 800 628 9870 FX 937 743 5664 Document Number PD196 220R2 PD Communication Systems Inc Better Solutions Are Within Reach Persona P14W LCD HDTV User Manual Page 7 of 21 Color Temperature The color temperature menu adjusts the color balance of the picture Standard Reddish Greenish Bluish color temperatures are available for selection however the individual colors are not adjustable The USER setting allows individual adjustment of each of the TV s primary colors The color temperature setting is best set using a calibrated signal source capable of generating a test signal containing both pure white and pure black picture components Color Temperature a Standard Reddish Greenish a Bluish a User Enter the Picture menu Press CHA CH to highlight Color Temperature Press VOL to enter it Press CH A CH to see the individual settings On User press VOL VOL to highlight R G or B or to get out of the customized adjustments Press CHA CHY to adjust R G or B NOTE When you select one of the three colors to adju
28. st the other two will turn grey 7 Press SETUP to return to the previous menu To exit press SETUP until the programming menus disappear Brightness 45 Contrast 80 a Color 60 Position A Y Exit SETUP ae eS Ae H Noise Reduction Additional picture improvement may be achieved by enabling the Noise Reduction function found in the Picture menu 1 Press the SETUP button to display the SETUP MODE menu Color Temperature Leg 2 Select the Picture menu item Sharpness 60 3 Press the CHA CHY buttons to highlight the Noise Reduction Noise Reduction Enabled 4 Use the VOL VOL gt buttons to alternate Enable or Disable Position A Y Exit SETUP 5 Press the SETUP button to return to the previous menu Next lt gt SOUND The Sound menu allows precise adjustment of several parameters 1 Press the SETUP button to display the SETUP MODE menu 2 Press the CHA CHY buttons to highlight the Sound menu item 3 Use the VOL VOL to display the Sound Menu Minimum Volume Sets the minimum volume level the TV can reach Setting this to any value other than 0 guarantees that some level of sound will always be heard when the TV is operating 1 In Sound menu press the CHA CH to select Minimum Volume Balance a Minimum Volume e Maximum Volume ws Power on Volume a Internal Speaker Enable a HDMI 1 Audio Port sa HDMI 2 Audio Port Composite Sound Mode Headph
29. tegories that are rated for older audiences will be automatically blocked If you block TV Y category then TV Y7 will be blocked automatically Similarly if you block TV G category then TV PG TV 14 and TV MA will also be blocked MPAA Rating Most televised movies are now rated MPAA Rating selectively allows the TV to only present movie content that is unblocked per its preset level 1 From the Parental Control menu enter the MPAA Rating menu 2 Press CH A or CH Y to highlight a particular MPAA Rating 3 Press VOL lt or VOL to select Blocked or Unblocked NOTE Parental Control will automatically block any category that is rated for older audiences For example if you block the PG 13 category then R NC 17 and X will be automatically blocked also 4 Press SETUP to return to the previous menu To exit press SETUP until the programming menus disappear Change Password The Parental Control access password can be changed using this menu NOTE The factory default password that is programmed into the TV is 0000 PDi Communication Systems Inc 40 Greenwood Lane Springboro Ohio 45066 USA PH 1 800 628 9870 FX 937 743 5664 MX p AS Persona P14W LCD HDTV User Manual Communication Systems Inc Better Solutions Are Within Reach Page 14 of 21 Television Rating Guides Meaning Young Children Content not offensive to most viewers Children 7 and over Considered suitable for children over 7 may contain Fantasy V
30. to select Add Delete Channels Press VOL VOL to select Press CH A CHY to select the Service Level you wish to add or delete channels Press VOL a VOL to enter the Add Delete Channels menu for that Service Level Press CH A CH to select Analog Channel Press VOL a VOL to scroll through every available channel The channel number changes to indicate the current channel viewed Press CHA CH to select Add Delete Analog Channel Press VOL VOL to alternately Add or Delete the current Analog Channel from the Service Level Press CHA CH to select Enable Disable Digital Channel A listing of all digital channels found during Auto Programming will be displayed NOTE Ifthe Enable Disable Digital Channels states no Channels either the TV did not locate any channels during Auto Programming or the Mode was set to Analog Only during Auto Programming 10 Press CHA CHY to select a Digital Channel 11 Press VOL lt VOLP to alternately Enable or Disable the current Digital Chanel from the Service Level 12 Press SETUP to return to the previous menus _ Add Delete Channels Channels Auto Program a Mode Digital Only es Channel Sequence interleave A D a Add Digital Signal Cable STD Free Programmed Basic Blank a sa Premium Blank a Signal Cable STD Auto Program a Clear Service Level Copy Service Level e Parental Control Power on Channel Channel Lock Disabled Chan
31. to your outlet consult an electrician for replacement of the obsolete outlet DO NOT use in an oxygen tent or oxygen chamber Such use may cause a fire hazard To prevent injury this apparatus must be securely attached to the wall in accordance with the installation instructions TV s can pose a striking hazard when mounted at an elevated position Protect the power cord from being walked on or pinched particularly at plugs convenience receptacles and the point where it exits from the apparatus Only use attachments accessories specified by the manufacturer Unplug this apparatus during lightning storms or when unused for long periods of time Refer all servicing to qualified service personnel Servicing is required when the apparatus has been damaged in any way such as power supply cord or plug is damaged liquid has been spilled or objects have fallen into the apparatus the apparatus has been exposed to rain or moisture does not operate normally or has been dropped Clean only with dry cloth For further cleaning use a soft cloth or paper towel dampened with water PDi Communication Systems Inc 40 Greenwood Lane Springboro Ohio 45066 USA PH 1 800 628 9870 FX 937 743 5664 lt PD p E Persona P14W LCD HDTV Communication Systems Inc Better Solutions Are Within Reach User Manual Page 2 of 21 Copyright Disclaimer and Trademarks Copyright PDi Communication Systems Inc claims proprietary right t
32. ts are designed to provide reasonable protection against harmful interference when the equipment is operated in a residential or commercial installation If this equipment does cause harmful interference to radio or television reception which can be determined by turning the equipment off and on the user is encouraged to try to correct the interference by one of more of the following measures Reorient or relocate the receiving antenna Increase the separation between the equipment and receiver Connect the equipment into an outlet on a circuit different from that to which the receiver is connected Consult the dealer or an experienced radio TV technician for help Underwriters Laboratories The model PDI P14W Hospital Grade LCD TV is a specialized LCD TV and should be installed to l National Electrical Code specifications c LJus LISTE This device is safety tested and listed by the Underwriters Laboratories as a product suitable for use in health care facilities in both the United States and Canada PDi Communication Systems Inc 40 Greenwood Lane Springboro Ohio 45066 USA PH 1 800 628 9870 FX 937 743 5664 MX PD p E Persona P14W LCD HDTV Better Solutions Are Within Reach User Manual Page 3 of 21 Contents IMPORTAN re Y INSTRUCTION KE 1 Copyrent Disclaimer and Trademarks rescence cconatnc ee eacesacusece ienaa eaan ia nAIRE RAN RA ARNAN AEAN A ERAAN RNANA EA TAAA 2 EECHER 2 INSTALLING TELEVISION comisarios tepiiido italia aid
33. ult Foreground Opacity Solid Translucent Transparent Flashing Default Background Opacity Solid Translucent Transparent Flashing Default Edge Style None Raised Depressed Uniform Left Drop Shadow Right Drop Shadow Default Digital Mode Time Setup The current time will be set automatically from a digital channel signal provided by a broadcasting TV station 1 Enter the Features menu 2 Press CH A or CH Y to highlight Digital Mode Time Setup 3 Press VOL gt to select it A re 4 Press CH lt or CH to select your viewing area time zone PRESSE AEN Pacific Alaska Hawaii Newfoundland Atlantic Eastern Central or Mountain 5 Press VOL A or VOL to highlight Daylight Savings 6 Press CH lt or CH to select Auto On or Off depending on whether or not your viewing area observes Daylight Savings Time 7 Press SETUP to return to the previous menu To exit press SETUP until the programming menus disappear Position A Y Exit SETUP PDi Communication Systems Inc 40 Greenwood Lane Springboro Ohio 45066 USA PH 1 800 628 9870 FX 937 743 5664 MX PD p E Persona P14W LCD HDTV Communication Systems Inc Better Solutions Are Within Reach User Manual Page 18 of 21 Diagnostics This menu provides readouts of the TV s internal operation The Diagnostics menu items are read only and cannot be changed Enter the Features menu 1 2 Press CHA or CH Y to highlight Diagnostics Field ON Hours
34. vel contains a different channel map Signal 1 Press the SETUP button on the remote control 2 Press CHA or CH Y to highlight Channels 3 Press VOLP to enter the Channels sub menu 4 Four different tuning types are available depending upon the healthcare facility s signal type Selection of the correct signal type is required for the TV to recognize all possible channels and before any channel programming can begin Enter the Channels menu Press CHA or CH Y to highlight Signal Press VOL to select Air Cable STD Cable IRC or Cable HRC NOTE Most hospitals use the Cable STD signal style SO Auto Program The TV automatically scans each available channel for activity Channels that display activity are memorized into the selected Service Level 1 From the Channels menu select Auto Program 2 Inthe Auto Program menu press the VOL button to select Mode 3 Press VOL to set the scope of channel scanning Analog Only TV searches for analog channels only Digital Only TV searches for digital channels only Analog and Digital TV searches for both analog and digital channels 4 Press the CH button to select the Channel Sequence menu item 5 Press lt VOLP to set the Channel Sequence in which the channels are displayed after searching Interleave A D In the order of channel number regardless of the system All A then D Digital channels are displayed after all analog channels 6 Press the CHA CH Y button to select
35. xiliary Block Source Like TV programs and channels the auxiliary sources can be blocked too When the TV encounters an external signal source that is not appropriate per its settings a black screen appears with muted sound NOTE Parental Lock must be enabled for the sources to be blocked 1 Inthe Parental Control menu press CH A or CH Y to highlight Aux Block Source 2 Press VOL lt or VOL gt to select Unblocked or Blocked 3 Press SETUP to return to the previous menu To exit press SETUP until the programming menus disappear Parental Lock Duration This sets how long an enabled Parental Lock will be active 1 Inthe Parental Control menu press CH A or CH Y to highlight Parental Lock Duration 2 Press VOL lt or VOL P to select the desired number of hours 1 99 or Always 3 Press the SETUP button to return to the previous menu To exit press SETUP until the programming menus disappear Parental Lock This enables or disables the settings in the Parental Control menu Enabling it will require the password to be entered to access the Parental Control menu in the future 1 Inthe Parental Control menu press CH A or CH Y to highlight Parental Lock 2 Press VOL lt or VOL gt to select Enable or Disable 3 Press the SETUP button to return to the previous menu To exit press SETUP until the programming menus disappear Power on Channel Displays a certain channel each time the TV is turned on This feature is useful for hospitals th
Download Pdf Manuals
Related Search