Home

42ZV650U 47ZV650U 55ZV650U Integrated High

Contents

1. Contents g At this time the REGZA LINK Player With your TV s remote control or using the REGZA ike Control menu will disappear LINK Player Control menu you can control the Set connected REGZA LINK playback device you are Ment Access the setup menu of a DVD player watching Accesses the top menu of a DVD during Available remote control key functions Top Menu playback Before using the following key functions first set the A th fa DVD duri MODE SELECT switch on the remote control to TV Menu playback STEM Oa MENS Button Description Mote as Begins playback e These functions depend on the devices connected STOP e The REGZA LINK Player Control item will be grayed out Stops playback in the following conditions pauselsrEr Pauses the picture during play or record Anon HDMI input is currently selected mode The Enable REGZA LINK item is set to Off es Skips forward The connected CEC device is not a playback or eae Skips backward recording device Fast forwards i a REGZA LINK input source selection Rewinds reverses If a REGZA LINK device with HDMI switchin v t tent tc Pp Store AYA Neves content ment ste capability e g Amplifier is connected to the HDMI E Enters contents menu etc input you can select another REGZA LINK device Rene tothe previousin nu that is connected to the master HDMI device using p on the remote control or the TV control panel i ExT Closes
2. HI VIDEO 1 IN IDEO T our ty re R PC audio cable PC audio gt I E Conversion adapter if necessary e To use a PC set the monitor output resolution on the PC before connecting it to the TV The PC IN terminal can accept and display VGA SVGA XGA WXGA and SXGA signal formats For detailed signal specifications see page 75 e To display the optimum picture use the PC settings feature ts Using the PC settings feature on page 57 Note e The PC audio input terminals on the TV are shared with the HDMI 1 analog audio input terminals e Some PC models cannot be connected to this TV e An adapter is not needed for computers with a compatible mini D sub 15 pin terminal e Depending on the DVD s title and the specifications of the PC on which you are playing the DVD Video some scenes may be skipped or you may not be able to pause during multi angle scenes eSignal names for mini D sub 15 pin connector Pin Signal Pin Signal Pin Signal No name No name No name 1 R 6 Ground 11 NC 2 G 7 Ground 12 NC 3 B 8 Ground 13 H sync 4 NC 9 NC 14 V sync 5 NC 10 Ground 15 NC NC Not connected To connect a PC to the HDMI terminal on the TV When connecting a PC to the HDMI terminal on the TV use an adapter cable and analog audio cables If connecting a PC with an HDM
3. To view the HDMI device video Select the HDMI 1 HDMI 2 HDMI 3 or HDMI 4 video input source on the TV oF To select the video input source press INPUT on the remote control 1s page 41 To program the TV remote control to operate other devices see Chapter 3 16 To connect a DVI device you will need one HDMI to DVI adapter cable For proper operation the length of an HDMI to DVI adapter cable should not exceed 9 8 ft 3m The recommended length is 6 6 ft 2m e one 3 5mm Stereo to RCA Y Cable An HDMI to DVI adapter cable transfers video only Separate analog audio cables are required see illustration See Setting the HDMI audio mode ts page 61 TV upper back panel Homi 1 2 3 ee IN STREAM STREAM N N PCIN colon coron PGHOM OO Q PAS Lono rO AUDIO R DVI device Note To ensure that the HDMI or DVI device is reset properly it is recommended that you follow these procedures e When turning on your electronic components turn on the TV first and then the HDMI or DVI device e When turning off your electronic components turn off the HDMI or DVI device first and then the TV 1 EIA CEA 861 D compliance covers the transmission of uncompressed digital video with high bandwidth digital content protection which is being standardized for recepti
4. Tuning to the next programmed channel Tuning to a specific channel programmed or unprogrammed Switching between two channels using Channel Return 20060 4305 50 EEA he cee Switching between two channels Using SurflLOCkK yoo sn ec eek eed d ee ese Selecting the picture size 00 6 cece eee eee ee Scrolling the picture nsii craes s ra aaa Using the Auto Aspect Ratio feature Using the 4 3 Stretch 00 0 A Era Ae Using the FREEZE feature 000005 Adjusting the picture 6 cee eee eee Selecting the picture mode 00 Adjusting the picture quality Using the TheaterLock feature 0565 Viewing the Control Visualization window Using the closed caption mode 0565 Analog CC Mode 6 6 cece cece ene Digital CC Settings 00 0 0606s ese e eben es CC Selector moci se sae esd Saat n ee a eagles ace oe oa Using the Closed Caption button on the remote control 0 0 cece eee Adjusting the audio issoro rti ordas venti pna eee Muting the sound 6 c cece cece eee Using the digital audio selector Selecting stereo SAP broadcasts 5 Adjusting the audio quality 0 Selecting the optical audio output format Using the Dolby Digital Dynamic Range Control feature Using Dolby Volume
5. Press lt or P to select On and press Ex a A OW PN Selecting the location You can select Home or Store for the TV location For normal home use select Home 1 From the SETUP menu highlight Location 2 Press or P to select Home and press Ext Selecting the TOSHIBA Illumination mode You can set the illumination mode of the TOSHIBA logo located on the front panel to On or Off 1 From the PREFERENCES menu highlight TOSHIBA Illumination 2 Press 4orP to select either On or Off then press EXIT 39 Chapter 5 Setting up your TV Selecting the Power On Mode Viewing the system status You can select either Power Saving or Fast mode e Power Saving mode keeps power consumption in standby mode to below 1W As a result it takes a bit longer for the TV to turn on e Fast mode increases power consumption in standby mode As a result the TV will turn on more quickly From the SETUP menu highlight Power On Mode 2 Press orP to select either Power Saving or Fast then press xr Select Power Saving for optimal energy efficiency Using Blue Screen With the Blue Screen feature the screen will turn blue and the sound will be muted on analog channels and external input modes when no signal is received 1 From the PREFERENCES menu highlight Blue Screen 2 Press orP to select On and press Ext Setting the screen tr
6. Caption Text Auto Black White Red Green Blue Edge Color Yellow Magenta Cyan To customize the closed captions 1 From the SETUP menu highlight TV Settings and press Press A or W to select Closed Captions Settings and press a highlight Digital CC Settings and press k N Press A or W to highlight the characteristic you want to change and then press lt or P to select the format for that characteristic see table above CC Selector You can use the CC and Digital Audio Selectors to temporarily override the default analog caption mode set in Analog CC Mode for a particular channel However once you change to another analog channel the closed caption setting will automatically change back to the current Analog CC Mode setting You can also use the CC Selector to select digital closed caption services if available When such services are not available the CC Selector presents a default list of services If the selected service is not available the next best service will be used instead To select closed captions 1 From the PREFERENCES menu highlight CC and Digital Audio Selectors and pean 2 Press A or W to highlight Closed Caption and then press lt or P to select the desired service then press Ext Using the Closed Caption button on the remote control If you press when an analog channel is tuned e The CC selector will be active and will display CC1 4 and T1
7. e As with all products that contain a digital display in rare instances when viewing certain content e g television broadcasts video games DVDs you may notice that the sound and picture are slightly out of sync This phenomenon can be caused by various factors including without limitation video processing within the TV video processing in an attached gaming system and video processing or different compression rates used by broadcasters in their programming You may want to try one or more of the following suggestions which may help to reduce the effect of this phenomenon If the TV is connected to an A V receiver that has a programmable audio delay feature use this feature to help synchronize the sound to the picture If you notice this phenomenon only on certain TV channels please contact your local broadcast cable or satellite provider to inform them of this issue Sound problems e Check the antenna cable connections cs gt Chapter 2 e The station may have broadcast difficulties Try another channel e The sound may be muted Press VOLUME e lf you hear no sound try setting the MTS feature to Stereo mode cs page 52 e f you are not receiving a second audio program from a known SAP source make sure the MTS feature is set to SAP mode cs page 52 e If you hear audio that seems incorrect for the program you are watching such as music or a foreign language the SAP mode may be on Set the MTS fe
8. eee REGZA Integrated High Definition LCD Television COLORSTAEAMH OODovey CoDoLBy DIGITAL VOLUME HDMI DM MDYssEY Div 42ZV650U For an overview of steps for setting up your new TV see page 9 Note To display a High Definition picture the TV must be receiving a High Definition signal such as an over the air High Definition TV broadcast a High Definition digital cable program or a High Definition digital satellite program For details please contact your TV antenna installer cable provider or satellite provider 2009 TOSHIBA CORPORATION All Rights Reserved APPROVED Owner s Record The model number and serial number are on the back and side of your TV Record these numbers in the spaces below Refer to these numbers whenever you communicate with your Toshiba dealer about this TV Model number i Serial number VX1A001303A0 Dear Customer Thank you for purchasing this Toshiba LCD TV This manual will help you use the many exciting features of your new LCD TV Before operating your LCD TV please read this manual completely and keep it nearby for future reference Safety Precautions WARNING TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE RISK OF ELECTRIC SHOCK DO NOT OPEN WARNING TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER OR BACK NO USER SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SE
9. may have to commence or participate in any representative or class proceeding against the Related Parties relating to any Dispute If and where applicable and to the extent not precluded by law you further agree to opt out of any such representative or class proceedings Arbitration of any Dispute will be conducted in the forum and in the manner as agreed to between you and TCL Failing such agreement the arbitration will be conducted by one arbitrator pursuant to the laws and rules relating to arbitration generally in force in the jurisdiction in which you reside at the time that the Dispute arises To the extent not precluded by law no claim dispute controversy or disagreement of any other person may be joined or combined with any Dispute by you without the prior written consent of TCL Critical Applications The Television you have purchased is not designed for any critical applications Critical applications means life support systems medical applications connections to implanted medical devices commercial transportation nuclear facilities or systems or any other applications where Television failure could lead to injury to persons or loss of life or catastrophic property damage F THE CUSTOMER USES THE TELEVISION IN ANY CRITICAL PPLICATION THE CUSTOMER AND NOT TCL ITS FFILIATES ADRs OR ASPs ASSUME SOLE AND FULL ESPONSIBILITY FOR SUCH USE TCL RESERVES THE RIGHT O REFUSE TO SERVICE ANY TELEVISION USED IN A CRITI
10. or A to highlight Inputs List and then press lt or P to select On or Off Press W or A to highlight Favorites List and then press lt or P to select On or Off Press W or A to highlight REGZA LINK List and then press lt or P to select On or Off Note REGZA LINK List will be automatically grayed out and set to Off when Enable REGZA LINK is switched to Off ts page 60 8 To return to factory defaults highlight Reset and press amp N On A To open the Channel Browser BACK NEXT Press 4 or P on the remote control Press 4 or P to surf backward or forward through the tuned 32 channels in the History list the channels in the ANT CABLE channel list the inputs in the Inputs list the REGZA LINK devices in the REGZA LINK list or the favorite channels inputs in the Favorites list Chapter 6 Using the TV s features Elements of the Channel Browser S E ie 5 6 1 Current list History ANT CABLE Inputs Favorites or REGZA LINK 2 Input type 3 Channel or input currently being viewed 4 Channel or input that is currently highlighted in the browser 5 Channels stored in the History List 6 Input labels To toggle among the available lists After opening the Channel Browser press A or Y to toggle ae eye ANT CABLE Inputs Favorites and REGZA LINK Note e The Channel Browser opens in History List by default Once another list has been selected the
11. 20798 21533 21127 20591 20741 20801 2086 21058 21158 21416 21440 20511 20741 20783 20651 20675 20503 20539 20646 20675 20821 21268 20503 20539 20675 21533 20651 20695 20831 21270 20522 21708 20752 20839 20717 21521 20521 20591 20741 20770 20785 20869 20717 21402 21003 21107 21265 20503 20627 20792 21769 20571 21854 20651 20672 27 Panasonic Philips PianoDisc Pioneer Polaroid PolkAudio Portland Presidian Prima Proceed Proscan ProVision Qwestar Radionette RadioShack RCA Realistic Reoc Rio Rotel Rowa Saba Sampo Samsung Sansui Sanyo Schneider Schwaiger Sensory Science Sharp Sharper Image Sherwood Shinsonic Slim Art Sonic Blue Sony Sova Superscan SVA Sylvania 28 20503 20490 20571 20703 21362 21462 21490 21762 20503 20539 20646 20675 20854 21260 21267 21354 21024 20525 20571 20631 21020 21061 21086 20539 20770 20675 21072 21016 20672 20522 20778 20651 20741 20571 20522 20571 20717 20790 20822 21022 21132 21769 20571 20752 20869 20623 21004 20651 20698 20752 20490 20573 20744 20820 20899 21044 21075 20695 20670 20675 20695 20873 21334 20783 20752 21158 20630 20675 20752 21256 21117 20770 21043 20533 20839 20784 20573 20715 20783 20869 21099 20533 21533 20864 21033 21070 21431 21122 208
12. Channel Browser will open in the last selected list NEXT e if all lists are turned off pressing lt 4 P or will not display the Channel Browser If Favorites List is turned off will have no effect e Pressing 1 will bring up the Channel Browser Favorites list regardless of the last selected list in the Channel Browser To tune to a channel or input in Browse mode 1 While watching TV press 4or P to open the Channel Browser and surf back to a previous item or surf forward to the next item in the list In Browse mode when you stop on an item in the Channel Browser it will be highlighted and the TV will automatically tune to the channel or input 2 Press En to close the Channel Browser To tune to a channel or input in Select mode 1 While watching TV press or P to open the Channel Browser and surf back to a previous item or forward to the next item in the list In Select mode when you stop on an item in the Channel Browser it will be highlighted but you must press to tune the TV to the highlighted item 2 Press to tune the TV to the highlighted item 3 Press Ext to close the Channel Browser Adding and clearing channels and inputs in the History List Adding channels and inputs to the History List As a channel or input is tuned the Channel Browser adds it to the History List and displays it on the right side of the Chann
13. Control Visualization 50 Reset TV 40 TheaterLock 50 MTS 52 SOUND Saas 52 THINC menu L Treble 52 The THINC menu provides access to the Media Balance 52 Player Channel Browser Favorites Browser and Advanced Sound Settings 66 REGZA LINK Player Control features Dolby Vol 53 The THINC menu is not part of the main menu system You can only view the THINC menu by Dynamic Range Control 53 pressing on the remote control Media Player 67 THIN EE Ci ns APPLICATIONS Channel Browser 42 STE ae Favorites Browser 42 REGZA LINK Player m Channel Browser Control Favorites Browser FB On Timer 58 REGZA LINK Player Control Sleep Timer 58 REGZA LINK Setup 60 PREFERENCES Channel Browser Setup 42 eo CC and Digital Audio 50 Selectors PIN Setting 53 Parental Control and Locks 54 Auto Aspect 48 4 3 Stretch 48 Auto Input 39 Blue Screen 40 Transparency 40 TOSHIBA Illumination 39 34 R Chapter 4 Menu layout and navigation Navigating the menu system You can use the buttons on the remote control or TV control panel to access and navigate your TV s on screen menu system e Press ME to open the main menus 4 PICTURE Picture Mode Reset Backlight Contrast Brightness Color Tint Sharpness e Press 4 or P on the remote control or TV control panel to select the top menu its respective items will appear below e To use the it
14. Note If the program or video you selected is not closed captioned no captions will display on screen e To view text Press 4 or gt to highlight T1 T2 T3 or T4 Note f text is not available in your area a black rectangle may appear on screen If this happens set the Closed Captions setting to Off Note A closed caption signal may not display in the following situations e When a videotape has been dubbed e When the signal reception is weak e When the signal reception is non standard Chapter 6 Using the TV s features Digital CC Settings You can customize the closed caption display characteristics by changing the background color opacity text size type edge and color Note e This feature is available for digital channels only e You cannot set the Caption Text and Background as the same color Mode Description Caption Size Auto Small Standard Large P Auto Default Mono w Serif Prop w Captor Text Serif Mono w o Serif Prop w o Serif ype Casual Cursive Small Capitals Caption Text Auto None Raised Depressed Uniform Left Drop Shadow Right Edge Drop shadow Caption Text Auto Black White Red Green Blue Color Yellow Magenta Cyan TextForeground Auto Transparent Translucent Opacity Flashing Solid Background Auto Black White Red Green Blue Color Yellow Magenta Cyan Bees d Auto Transparent Translucent Opacity Flashing Solid
15. SLEEP TV Sleep TV Sleep TV Sleep TV Sleep TV Sleep TV Sleep TV Sleep MOPE Remote control device mode selection POWER Power Power Power Power Power Power Power 1 Digit 1 Digit 1 Digit 1 Digit 1 Digit 1 Digit 1 Digit 1 2 Digit 2 Digit 2 Digit 2 Digit 2 Digit 2 Digit 2 Digit 2 3 Digit 3 Digit 3 Digit 3 Digit 3 Digit 3 Digit 3 Digit 3 4 Digit 4 Digit 4 Digit 4 Digit 4 Digit 4 Digit 4 Digit 4 5 Digit 5 Digit 5 Digit 5 Digit 5 Digit 5 Digit 5 Digit 5 6 Digit 6 Digit 6 Digit 6 Digit 6 Digit 6 Digit 6 Digit 6 7 Digit 7 Digit 7 Digit 7 Digit 7 Digit 7 Digit 7 Digit 7 8 Digit 8 Digit 8 Digit 8 Digit 8 Digit 8 Digit 8 Digit 8 Digit 9 Digit 9 Digit 9 Digit 9 Digit 9 Digit 9 Digit 9 0 Digit 0 Digit 0 Digit 0 Digit 0 Digit 0 Digit 0 Digit 0 memes e eee eee wo INPUT TV Input TV Input TV Input TV Input TV Input TV Input TV Input A Menu select Menu select Menu select Menu select Menu select Menu select up up up up up up v Menu select Menu select Menu select Menu select Menu select __ Menu select down down down down down down Menu select lt 33 gt left right Meu select Menu select Menu select Menu select ____ Menu select Back eft right left right left right left right left right Next ENTER Enter Enter Select Enter Enter Enter Enter BROWSER FAY pee O DVD setup DVDsetup SETUP BROWSER P P MENU Menu Cable menu Action menu DVD menu DVD menu Menu THINC TOP THI
16. Samsung Samtron Sanky Sansui Sanyo Scientific Atlanta Scott Sears Sharp Shintom Shogun Siemens Signature Singer Sonic Blue Sonographe 30037 30060 30035 30048 30240 30045 30000 30042 30149 30105 30106 30202 30760 30807 30880 31035 31060 30035 30162 30037 30048 30047 30240 30000 30104 30121 30278 30046 30062 31162 30614 30616 31972 30039 30060 30240 30045 30000 30038 30432 30739 31014 30240 30048 30039 30240 30000 30067 30209 30041 30072 30002 30271 30479 31479 30047 30240 30000 30104 30046 30159 30479 30008 30184 30045 30121 30043 30208 30210 30060 30035 30162 30037 30048 30039 30047 30033 30045 30000 30042 30104 30067 30043 30209 30041 30072 30046 30105 31237 30048 30047 30032 30000 30062 30807 30848 30039 30240 30000 30072 30208 30240 30037 30104 30060 30035 30037 30048 30000 30149 30046 30479 30037 30240 30072 30614 30616 30046 Sony Soundmaster Stack 9 STS SV2000 SVA Sylvania Symphonic Systemax Tagar Systems Tandy Tatung Teac Technics Teknika Telecorder Telefunken Tevion Thomas Thomson Tisonic Tivo TMK TNIX Tocom Toshiba Tosonic Totevision Touch Trix Ultra Unitech Vector Vector Research Vextra Victor 30035 30047 30032 30033 30000 30067 30046 30636 31032 31232 31972 30000 31972 30042 30105 30000 30072 30000 3
17. The remote control will operate the volume of the device associated with the current device mode If you lock the remote control s volume keys to a specific device mode the remote control will operate the volume of the device associated with the locked mode even when the locked mode is not the current device mode See Using the remote control to operate your other devices on page 24 To lock the remote control s volume keys to a specific mode CABLE SAT in this example 1 Press CABLE SAT 2 While holding down the ku button press 8 0 0 0 3 Press d The CABLE SAT mode select button will blink two times locked The remote control s volume keys will now operate the volume of the device associated with the CABLE SAT mode even when CABLE SAT is not the current device mode To unlock the remote control s volume keys 1 While holding down fe press 8 0 0 0 2 Press Y The CABLE SAT mode select button will blink four times The CABLE SAT mode will be unlocked Operational feature reset 8900 This feature clears all programmed remote control features not related to Device code setup and resets the volume lock to the TV device mode To reset the remote control While holding down kau press 8 9 0 0 The mode select button will respond with four blinks 25 Multi brand remote control device codes TVs Brand Toshiba Cable boxes
18. To secure the TV in this manner 1 attach the provided securement clip to an immovable structure then 2 pass a sturdy strap through the securement clip and attach each end to the hooks located on the back of the TV Be sure to leave at least 4 inches between the TV and the wall or similar structure for ventilation See item 23 page 3 for additional details To Display your LCD TV using a Wall Bracket If you decide to wall mount your LCD TV always use a UL listed wall bracket appropriate for the size and weight of the LCD TV t page 2 1 CAUTION Two people are required for installation 2 Unplug and remove any cables and or other component connectors from the rear of the TV 3 Follow the instructions provided with your wall bracket Before proceeding make sure the appropriate bracket s are attached to the wall and the back of the TV as described in the instructions provided with the wall bracket 4 After attaching the appropriate bracket s to the wall and the back of the TV remove the pedestal stand from the TV as described below Removing the Pedestal Stand 1 Carefully lay the front of the unit face down on a flat cushioned surface such as a quilt or blanket Leave the stand protruding over the edge of the surface Note Extreme care should always be used when removing the pedestal stand to avoid damage to the LCD panel 2 Remove the four screws shown in the diagram below This will allow removal of t
19. channels in the Channel Browser before you select one to tune e Quickly change inputs from the Inputs List e Quickly select REGZA LINK devices from the REGZA LINK List Favorites Browser The Favorites Browser allows you to quickly set up a favorite channels inputs list that is integrated into the Channel Browser To add a favorite channel input 1 Tune to the channel or input 2 Press and hold on the remote control for 3 seconds Note Additions are added to the beginning of the Favorites list on the left side of the Channel Browser To delete a favorite channel input 1 Press to open the Favorites browser list 2 Highlight the channel or input to delete by pressing dor P 3 Press and hold for 3 seconds The channel input will be removed from the Favorites list 42 To set up the Channel Browser 1 From the PREFERENCES menu hi hlight Channel Browser Setup and pices aa 2 Press V or A to highlight Navigation and then ress or P to select either Select Mode or rowser Mode Navigation lt Select Mode gt History List On ANT CABLE List On Inputs List On Favorites List On REGZA LINK List On Reset 3 Press or A to highlight History List and then ress or P to select the setting you prefer either n or Off Note History List will be cleared every time the TV is powered off Press W or A to highlight ANT CABLE List and then press lt or P to select On or Off Press
20. gt _ Component video cables come in sets of three and are for use with video devices with component video output ColorStream is Toshiba s brand of component video These cables are typically color coded red green and blue Separate audio cables are required for a complete connection Note Component video cables provide better picture performance than a standard composite video or S video cable 12 HDMI High Definition Multimedia Interface cable is for use with devices with an HDMI output An HDMI cable delivers digital audio and video in its native format This cable carries both video and audio information therefore separate audio cables are not required for a complete HDMI device connection 1g page 16 17 and 19 Note An HDMI cable provides the best audio and picture performance Dual wand IR blaster cable a Dual wand IR blaster cable is for use with video devices with IR infrared remote control This cable can be used with the TV s IR pass through feature ts page 15 To obtain IR blaster cable Visit http ceaccessories toshiba com Optical audio cable D c Optical audio cable is for connecting receivers with Dolby Digital or PCM y modulation optical audio input to the TV s DIGITAL AUDIO OUT terminal t page 18 Analog RGB 15 pin computer cable F Analog RGB 15 pin computer cable is for
21. ii located operated in Canada 4 Labour charges for set installation setup adjustment of customer controls and installation or repair of antenna systems are not covered by these warranties Reception problems caused by inadequate antenna systems are your responsibility 5 Warranties extend only to material defects in materials or workmanship as limited above and do not extend to a Service repairs or replacement made necessary by accident misuse abuse moisture liquids dust dirt neglect accident damage 24 7 applications improper installation improper operation improper cleaning improper maintenance normal wear and ear screen burn or image retention caused by prolonged display of static images and or phosphor aging or any other external cause or event act or omission outside the control of TCL including fire heft acts of God alteration power failures power surges or power shortages lightning other electrical aults or repairs modifications or replacements by persons other than those authorized by TCL to service he Television b Replacement of missing discarded or lost parts the provision of retrofits or preventive maintenance c Repair of damage that is cosmetic only or does not affect the Television functionality such as wear and tear scratches and dents d Service on Toshiba branded accessory items such accessory items may be covered by their own warranty e Service on third party produc
22. multiple audio tracks This temporarily overrides the audio track chosen by the language option under MTS tz Selecting stereo SAP broadcasts on right hand column To use the digital audio selector 1 From the PREFERENCES menu highlight CC and Digital Audio Selectors and pees 2 Press Aor to select Digital Audio 3 Press or P to select the desired service then press EXIT 52 Selecting stereo SAP broadcasts The multi channel TV sound MTS feature allows you to output high fidelity stereo sound MTS also can transmit a second audio program SAP containing a second language music or other audio information when provided by individual stations When the TV receives a stereo or SAP broadcast the word STEREO or SAP appears on screen when kau is pressed The MTS feature is only available for analog signals on the ANT CABLE input To listen a stereo sound 1 From the SOUND menu highlight MTS 2 Press or P to select Stereo and press n Note e You can typically leave the TV in Stereo mode because it will automatically output the type of sound being broadcast stereo or monaural e If the stereo sound is noisy select Mono to reduce the noise To listen a second audio program on an analog station if available Select SAP in step 2 Note e A Second Audio Program SAP can be heard only on those TV stations that offer it For example a sta
23. new HDMI capabilities and will be grayed out on non HDMI inputs Some HDMI legacy sources may not work Ppa with your HDMI TV cess try setting the followin options Deep Color Lip Sync INSTAPORT an RGB Range to Off Adjusting these settings should allow your HDMI legacy source to operate properly with your TV e Deep Color On This feature allows the HDMI source to increase available colors bits within the boundaries defined by the RGB or YCbCr color space e Lip Sync On The Lip Sync feature allows an HDMI source such as an audio receiver to adjust audio delay to match the video processing delay of the TV eINSTAPORT On This feature reduces the lag of switching time when switching HDMI sources e RGB Range Auto This feature adjusts RGB full range signal automatically When Limit is selected RGB output signal is output in the range from 16 to 235 When Full is selected RGB output signal is output in the range from 0 to 255 All of the above HDMI settings need proper HDMI source devices If an HDMI source device does not support these features the TV may not work properly when these features are enabled Note If your HDMI connection is capable of 1080p and or your TV is capable of refresh rates greater than 60Hz or supports Deep Color you will need a High Speed HDMI cable Conventional HDMI DVI cables may not work properly with this mode 1 Select the a riate HDMI input mode HDMI 1 HDMI 2 HDMI 3 or HD
24. 1 HDMI 2 HDMI 3 HDMI 4 PC eVCR PVR ANT CABLE Video 1 Video 2 ColorStream HD1 ColorStream HD2 HDMI 1 HDMI 2 HDMI 3 HDMI 4 PC Note The TV mode select button will be restricted to the ANT CABLE input To set Auto Input 1 From the PREFERENCES menu highlight Auto Input and press 2 Set Enable Auto Input to On Auto Input Use this menu to enable your TV s automatic input switching feature when changing modes on your remote control Enable Auto Input On TV Fa CABLE SAT ColorStream HD1 wv CABLE SAT DVD VCR PVR DVD HDMI 1 VCR PVR lt Video 1 gt Reset 3 Press A or to select the mode field you want to set 4 Press orP to select the desired input source for that mode 5 Repeat steps 3 and 4 for other modes To turn off Auto Input Select Off in step 2 Note Setting the feature to Off will not cancel any settings however all items will be grayed out To reset Auto Input Highlight Reset and press The Time Zone setup will allow you to specify the correct time zone for your region This feature will allow the TV status information to show the correct time zone information for your viewing area 1 From the SETUP menu highlight TV Settings and press amp Press A or W to select Local Time Setting and press amp Highlight Time Zone and press lt or P to set your desired time zone If you want to activate the daylight saving time highlight Daylight Saving Time
25. 31972 31972 31972 31972 30739 31972 31972 31972 31972 30739 30739 31972 31972 31972 31972 31972 31972 31972 31972 30616 30618 30739 30880 30614 30616 Samsung Sonic Blue Sony Stack 9 Systemax Tagar Systems Tivo Toshiba Touch Viewsonic Voodoo ZT Group Cable PVR Combo Brand Americast Amino Digeo General Instrument Jerrold Motorola Myrio Pace Pioneer RCA Scientific Atlanta Sony Supercable Thomson Zenith DBS PVR Combo Brand DirecTV Dish Network System Dishpro Echostar Expressvu Hughes Network Systems JVC Motorola Philips Proscan RCA Samsung Sony Star Choice 30739 30614 30616 30636 31972 31972 31972 31972 30618 30636 30739 31008 31972 31996 31972 31972 31972 31972 Code 10899 11822 11187 10810 10810 11376 10810 11187 11106 11822 11877 10237 11877 10877 11256 11877 10877 11006 10276 11256 10899 Code 11377 10392 10639 11142 11076 10099 11392 11442 11640 11505 10775 11505 10775 11505 10775 11170 10775 11142 11442 11170 10869 11142 11442 10392 11392 11442 10639 11640 10869 31 Chapter 3 Using the remote control Hughes Network 30739 Inkel 50157 50180 Sanyo 50000 50087 Systems Integra 50101 50179 Philips 30739 Sears 50179 P Jerrold 50003 Samsung 30739 Jvc 50032 50072 Sharp 50037 50180 Kenwood 50626 50000 Sherwood 50180 Audio Amp 50
26. 37 If you are still unable to tune digital channels use the Reset Factory Defaults procedure re page 40 Also see TV stops responding to controls and Other problems us page 71 Closed caption problems e If the program or video you selected is not closed captioned no captions will display e If text is not available a black rectangle may appear If this happens turn off the closed caption feature ts page 50 e A closed caption signal may not display correctly in the following situations a when a videotape has been dubbed b when the signal reception is weak or c when the signal reception is nonstandard re page 50 Rating blocking V Chip problems e If you forget your PIN code While the PIN code entering screen is displayed press fe four times within 5 seconds The PIN code you previously stored will be cleared cs page 53 e The V Chip feature is available for the U S V Chip system only ts page 54 No REGZA LINK operation e The REGZA LINK feature is available for Toshiba REGZA LINK compatible devices e Make sure the HDMI cables with the HDMI Logo HOMAI are used e When the connected REGZA LINK device does not work correctly after you have changed settings of the device turn off your TV and unplug the power cord then plug and turn on again e f several devices are connected REGZA LINK feature may not operate properly e Read the instruction manual furnished with the connected REGZA LIN
27. 4 as the options e The audio selector will be disabled If you press when a digital channel is tuned e The CC selector will be active and will display the possible caption options available languages for that channel or service For example in addition to English a channel might offer closed captions in Spanish and or French e The audio selector will be active and will offer different audio choices for the digital channel Dolby or AC3 for example 51 Chapter 6 Using the TV s features Adjusting the audio Muting the sound Press r on the remote control to partially reduce 1 2 MUTE or turn off MUTE the sound Each time you press r the mute mode will change in the following order pe Mute gt Mute Volume as If the closed caption mode is set to Off when you select MUTE mode the closed caption feature is automatically activated if the TV program is Closed Captioned To mute the audio without automatically activating the closed caption feature use 2J to set the volume to 0 See Using the closed caption mode pase 50 for more information on closed caption modes Note If you modify items in the SOUND menu while mute is active the mute will automatically be cancelled to allow for proper adjustment Using the digital audio selector You can use the Digital Audio setting to conveniently switch between audio tracks on a digital channel for those channels that have
28. 6 0 0 000000 Setting the PIN code senise 0 6 c cece cece eee Registering a new PIN code 0 0005 Changing or deleting your PIN code If you cannot remember your PIN code Blocking TV programs and movies by rating V Chip serei sidad oei Dn eae Downloading an additional rating system for blocking TV programs and movies Unlocking programs seige niseni nsii Locking channels sapp ene uoe ase en Using the input lock feature 04 Using the GameTimer 0 0 0 e eee Using the panel lock feature 04 Using the PC settings feature 05 Setting the PC Audio 60 0 cece cece ees Setting the On Timer s tenros verma iada e cece eens Setting the Sleep Timer ove iss som nee neneng cece eens Using REGZA LINK 20 0 6 REGZA LINK playback device DVD player etc control 4 REGZA LINK input source selection Amplifier VOLUME and MUTE controls Other REGZA LINK functions 55 60 REGZA LINK PC Link 2 00 06 0 cee ee eee 60 Using the HDMI settings feature 61 Setting the HDMI audio mode 4 61 Displaying TV status information 62 Understanding the auto power off feature 62 Understanding the last mode memory feature 62 Chapter 7 Using the TV s advanced features 63 Using the
29. E to increase the time in 10 minute increments or press A or F to increase or decrease the time in 10 minute increments to a maximum of 12 hours and 50 minutes To set the sleep timer using the on screen menus 1 From the APPLICATIONS menu highlight Sleep Timer and press n 2 Press the number buttons to enter the length of time or press or P to increase or decrease in 10 minute increments maximum of 12 hours and 50 minutes Note When a power failure occurs the sleep timer setting may be cleared To display the remaining sleep time Press S To cancel the sleep timer Repeatedly press 8 until it is set to 0 minutes Chapter 6 Using the TV s features Using REGZA LINK This feature uses CEC technology and allows you to control Toshiba REGZA LINK compatible devices from the TV remote via HDMI connection i page 17 When Enable REGZA LINK in the REGZA LINK Setup menu is set to On the following REGZA LINK functions will be enabled REGZA LINK playback device DVD player etc control REGZA LINK Player Control menu functions 1 Press and open the THINC Applications menu 2 Highlight REGZA LINK Player Control and press 3 Press A or to select the item you want to control and press e Item Description Power Turns the select device on and off Root Menu Access the top menu of the select device Accesses the contents list when you press
30. Protection Agency ENERGY STAR and the ENERGY STAR mark are registered U S marks Important notes about your LCD TV The following symptoms are technical limitations of LCD Display technology and are not an indication of malfunction therefore Toshiba is not responsible for perceived issues resulting from these symptoms 1 An afterimage ghost may appear on the screen if a fixed non moving image is displayed for a long period of time The afterimage is not permanent and will disappear in a short period of time 2 The LCD panel contained in this TV is manufactured using an extremely high level of precision technology however there may be an occasional pixel dot of light that does not operate properly does not light remains constantly lit etc This is a structural property of LCD technology is not a sign of malfunction and is not covered under your warranty Such pixels are not visible when the picture is viewed from a normal viewing distance Note Interactive video games that involve shooting a gun type of joystick at an on screen target may not work with this TV Trademark Information e Manufactured under license from Dolby Laboratories Dolby and the double D symbol are trademarks of Dolby Laboratories e AUDYSSEY Audyssey EQ is based on the award winning Audyssey MultEQ technology It is the first ever room equalization solution that can achieve optimum sound for a large listening are
31. Red blinks Power protect detection Turn OFF the TV and unplug the power cord Plug the power cord in again and turn ON the TV e Orange blinks Abnormal operation of back light Turn OFF the TV and unplug the power cord Plug the power cord in again and turn ON the TV On Timer LED e Green is ON solid On Timer is set e Green blinks if applicable Fan Stopped Turn Off the TV and unplug the power cord Plug the power cord in again and turn ON the TV If after trying the solutions the problem still exists e Inthe U S call TACP Consumer Solutions at 1 800 631 3811 e In Canada locate the nearest Toshiba authorized service depot by directing your web browser to www toshiba ca click Home Entertainment and then click Support 73 Chapter 9 Appendix Specifications Note e This model complies with the specifications listed below e Designs and specifications are subject to change without notice e This model may not be compatible with features and or specifications that may be added in the future Television System NTSC standard ATSC standard 8VSB Digital Cable 64 QAM 256 QAM in the clear unencrypted Channel Coverage VHF 2 through 13 UHF 14 through 69 Cable TV Mid band A 8 through A 1 A through I Super band J through W Hyper band AA through ZZ AAA BBB tra band 65 through 94 100 through 135 Power Source 120 V AC 60 Hz Power Consumption 42ZV650U 1 7 Arm
32. TORT INCLUDING NEGLIGENCE UNDER A TATUTE OR UNDER ANY OTHER LAW OR FORM OR ACTION R WHETHER ARISING OUT OF THE USE OF OR INABILITY TO SE THE TELEVISION EVEN IF ANY OF THE RELATED PARTIES AS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES R OF ANY CLAIM BY ANY OTHER PARTY No person agent distributor dealer or company is authorized to change modify or extend the terms of these warranties in any manner whatsoever Arbitration and Dispute Resolution To the extent not precluded by law any claim dispute controversy or disagreement whether for breach of warranty breach of contract tort including negligence and negligent and or fraudulent misrepresentation under a statute or under any other law or form of action against any of the Related Parties arising out of or otherwise relating to i this warranty ii the Television iii any oral or written representations statements brochures press releases advertising announcement point of sale display or promotional material relating to the Television iv the relationships that result from this warranty the foregoing claims disputes controversies and disagreements are collectively referred to as the Dispute shall be referred to and resolved by final and binding arbitration to the exclusion of the courts To the extent not precluded by law you agree to waive any right that you on 200 n gt MI gt OLTCOVOU
33. TUNING nasisa 37 AUtOVIOW oo eeceeeeeeeeeeeteeeneteneees 49 B Back lightscsactsdeacessetensecedacteneacensseteae 49 Backlight Adjustment Pro 65 Base Color Adjustment 65 Blue Screen nssr 40 c CLOSED CAPTION button aood CH AY buttons 44 CH RTN button 44 Channel Browser 42 Channel lock 56 Channel Number buttons Channel Tuning Mode ClearScan 240 64 Closed captions 50 Color Temperature eeeeeeeeeee 66 ColorMaster seeen 65 ColorStream saae 14 Component video eeeeeeeneeeees 14 D Deep Colot eeeeceeeeseeceeeeeeeeeeeees 61 Digital Audio Out ee eeeeeeeeeeee 18 Digital audio selector eee 51 Digital CC Settings 0 51 DIVX svirrer id 68 DNs ea A 64 Dolby Digital ceeeeeeeeeeeees 18 Dolby Volume cecceseeeteeteeeeees 53 Dynamic Range Control 00 53 DVD player connection 14 DVI CONNECTION eee eee eet eeereeee 16 DynaLlight seeen 63 Dynamic Bass Boost ecce 66 Dynamic Contrast 63 E Expert Mode cccessseeeeeeeeseeees 64 F Film Stabilization eeeeeeeeeees 63 FREEZE saie oea 48 G GameTimer 0 0 0 eeeeeeeeeeeeeeeeeeeeees 56 HDMI audio mode HDMI settings HDMI connection INPUT button INSTAPORT Integrated digital tuning Language selection Last mode memory feature LED indications Manual Tuning Media
34. Units TACP warrants LCD Televisions that are sold and used for commercial purposes as follows all parts are warranted against defects in materials or workmanship for a period of ninety 90 days after the date of original retail purchase DURING THIS PERIOD TACP WILL AT TACP S OPTION REPAIR OR REPLACE A DEFECTIVE PART WITH A NEW OR REFURBISHED PART WITHOUT CHARGE TO YOU Owner s Manual and Product Registration Card Read this owner s manual thoroughly before operating this LCD Television Complete and mail the enclosed product registration card or register your LCD Television online at www tacp toshiba com service as soon as possible By registering your LCD Television you will enable TACP to bring you new products specifically designed to meet your needs and help us to contact you in the unlikely event a safety notification is required under the U S Consumer Product Safety Act Failure to complete and return the product registration card does not diminish your warranty rights Your Responsibility THE ABOVE WARRANTIES ARE SUBJECT TO THE FOLLOWING CONDITIONS 1 You must retain your original bill of sale or provide other proof of purchase 2 All warranty servicing of this LCD Television must be performed by an Authorized TACP Service Station 3 The warranties from TACP are effective only if this LCD Television is purchased and operated in the Continental U S A or Puerto Rico 4 Labor service charges for set
35. additional antenna grounding information see items 30 and 31 on page 4 CHILD SAFETY It Makes A Difference How and Where You Use Your Flat Panel Display Congratulations on your purchase As you enjoy your new product please keep these safety tips in mind The Issue e The home theater entertainment experience is a growing trend and larger flat panel displays are popular purchases However flat panel displays are not always supported on the proper stands or installed according to the manufacturer s recommendations e Flat panel displays that are inappropriately situated on dressers bookcases shelves desks speakers chests or carts may fall over and cause injury TOSHIBA Cares e The consumer electronics industry is committed to making home entertainment enjoyable and safe Tune Into Safety e One size does NOT fit all Follow the manufacturer s recommendations for the safe installation and use of your flat panel display e Carefully read and understand all enclosed instructions for proper use of this product e Don t allow children to climb on or play with furniture and television sets e Don t place flat panel displays on furniture that can easily be used as steps such as a chest of drawers e Remember that children can become excited while watching a program especially on a larger than life flat panel display Care should be taken to place or install the display where it cannot be pushed pulled ov
36. amplifiers that produce heat Wide blade with one wider than the other ge A grounding type plug has two blades and a third grounding prong The wide blade or the third prong are provided for your safety If the provided plug does not fit into your outlet consult an electrician for replacement of the obsolete outlet 9 Do not defeat the safety purpose of the polarized or grounding type plug A polarized plug has two blades 10 SS Protect the power cord from being e ALWAYS contact a service technician to inspect the TV any time it has been damaged or dropped 15 CAUTION e To reduce the risk of electric shock do not use the polarized plug with an extension cord receptacle or other outlet unless the blades can be inserted completely to prevent blade exposure e To prevent electric shock match wide blade of plug to wide slot fully insert 16 WARNING To prevent the spread of fire keep candles or other open flames away from this product at all times Installation Care and Service Installation Follow these recommendations and precautions and heed all warnings when installing your TV 17 WARNING NEVER expose batteries to excessive heat such as sunshine fire or the like 18 ALWAYS plug the product into an outlet that is located in such a manner that it can be easily unplugged in case the product requires service walked on or pinched particularly at plugs z A convenience
37. dor P to select Smooth Standard or Off and press Exr Note lf the Picture Mode is set to Game this feature is set to Off automatically 63 Chapter 7 Using the TV s advanced features Using Expert Mode This feature individually enables disables the Red Green and Blue components of the picture to allow for more accurate adjustment of each color 1 From the PICTURE menu hi hlight Advanced Picture Settings and press 5 2 Press Aor W to select the Expert Mode and then press re 3 Press A or V to select either Red Green or Blue you want to adjust Expert Mode H Red LI Green lt On gt L Biue Color Tint 4 Press or P to select On 5 Press W to select Color or Tint and then press lt 4 or gt to adjust and then press Ex Note e f the Picture Mode is set to AutoView this feature will be grayed out e When the Expert Mode menu is exited the On Off modes of Red Green and Blue are no longer valid e It is not possible to turn off all three colors at the same time Using ClearScan 240 feature This feature reduces image lag and provides a crisper image 1 From the PICTURE menu hi hlight Advanced Picture Settings and press 2 Press A or to select ClearScan 240 3 Press dor P to select On then press Ext 64 Using MPEG NR The MPEG noise reduction feature allows you to reduce visible interference caused by MPEG compression 1 From the P
38. drapes curtains or walls or ein a confined space such as a bookcase built in cabinet or any other place with poor ventilation The slots and openings are provided to protect the TV from overheating and to help maintain reliable operation of the TV Leave a space of at least 4 four inches around the TV 26 Always place the back of the television at least four 4 inches away from any vertical surface such as a wall to allow proper ventilation 27 Never allow anything to rest on or roll over the power cord and never place the TV where the power cord is subject to wear or abuse 28 Never overload wall outlets and extension cords 29 Always operate this equipment from a 120 VAC 60 Hz power source only 30 Always make sure the antenna system is properly grounded to provide adequate protection against voltage surges and built up static charges see Section 810 of the National Electric Code ae Antenna lead in wire Antenna discharge unit NEC Section 810 20 Grounding conductors NEC Section 810 21 Electric service equipment s Power service grounding Ground clamps aa electrode system NEC Art 250 Part H DANGER RISK OF SERIOUS Ay PERSONAL INJURY OR DEATH e Use extreme care to make sure you are never in a position where your body or any item you are in contact with such as a ladder or screwdriver can accidentally touch overhead power lines Never locate the antenna nea
39. four digit number Reenter the PIN code to confirm it New PIN Confirm PIN code Changing or deleting your PIN code 1 From the PREFERENCES menu highlight PIN Setting and press A new screen will display 2 Press number buttons to enter your four digit PIN code Enter PIN e Change PIN Highlight Change PIN and press e Delete PIN Highlight Delete PIN and press amp If you delete the PIN code the settings of Parental Control and Locks are reset If you cannot remember your PIN code While the PIN code entering screen is displayed ress feu four times within five seconds The PIN code will be cleared and you can enter a new PIN code 53 Chapter 6 Using the TV s features Blocking TV programs and movies by rating V Chip Some TV programs and movies include signals that classify the content of the program violence sex dialogue language The V Chip feature in this TV detects the signals and blocks the programs according to the ratings you select For rating descriptions see the tables on the next page Note Rating blocking is a function of the V Chip feature in this TV which supports the U S V Chip system only To block and unblock TV programs and movies From the PREFERENCES menu highlight Parental Control and Locks and press Enter your four digit PIN code Press A or W to highlight Enable Rating Blocking Press lt 4 or P to select On Press to highli
40. ina proper location i pages 2 5 2 Donot plug in ny power cords until AFTER you have connected all cables and devices to your TV 3 BEFORE connecting cables or devices to the TV learn the functions of the TV s connections and controls ts pages 10 11 4 Connect your other electronic device s to the TV c pages 13 19 5 See Chapter 3 Using the remote control t page 20 for an overview of the buttons on the remote control install the batteries and prepare to operate your other device s 6 AFTER connecting all cables and devices plug in the power cords for your TV and other devices Note After you turn on the TV the Initial Setup menu appears automatically by default 7 See Menu layout and navigation for a quick overview of navigating the TV s menu system t page 34 8 Program channels into the TV s channel memory t page 37 9 For details on using the TV s features see Chapters 6 and 7 10 For help refer to the Troubleshooting Guide see Chapter 8 11 For technical specifications and warranty information see Chapter 9 Chapter 1 Introduction TV front and side panel controls and connections Model 42ZV650U is used in this manual for illustration purposes TV front me a ON TIMER POWER Right side panel a S 13 1 2 3 4 1 TOSHIBA Illumination The TOSHIBA logo
41. installation setup adjustment of customer controls and installation or repair of antenna systems are not covered by this warranty Reception problems caused by inadequate antenna systems misaligned satellite dishes cable television distribution VCRs DVD players recorders personal computer level IEEE 1394 devices and any other connected signal source device are your responsibility 5 Warranties extend only to defects in materials or workmanship as limited above and do not extend to any LCD Television or parts that have been lost or discarded by you or to damage to the LCD Television or parts caused by fires misuse accident Acts of God such as lightning or fluctuations in electric power improper installation improper maintenance or use in violation of instructions furnished by TACP use or malfunction through simultaneous use of this LCD Television and connected equipment or to units that have been modified or had the serial number removed altered defaced or rendered illegible How to Obtain Warranty Service If after following all of the operating instructions in this manual and reviewing the section entitled Troubleshooting you find that service is needed 1 To find the nearest TACP Authorized Service Station visit TACP s website at www tacp toshiba com service or contact TACP s Consumer Solution Center toll free at 1 800 631 3811 2 You must present your original bill of sale or other proof of pur
42. into the USB terminal or SD memory card into the SD card slot on the right side of the TV 2 Press and highlight Media Player and then press ie 3 Press A or W to select Photo Movie or Music and press The thumbnail for Photo or list of files for Movie and Music will appear 4 Press A or to select USB device or SD memory card if the selection window appears To select a file in the list of contents 1 Press A V dor to select a file or folder 2 Press to move to the next layer press to return to the previous layer If there are more pages in the list press or to move to the previous or next page To close the Media Player Press x The TV will return to the last viewed channel or video input 67 Chapter 7 Using the TV s advanced features Playing DivX files only for USB devices Note Some DivX contents will not play without registration of your TV To playback those DivX files register your TV to your DivX account te right hand column Basic Playback 1 After selecting a file c To select a file in the list of contents on page 67 press or C3 to begin playback Note e The Media Player memorizes the location where playback is stopped The content resumes playback from the location where playback was stopped when you press amp next time To start playback from the beginning regardless of the location where playback STOP was stopped press ta twic
43. items in the main menu system 9 THINC accesses the THINC menu i page 34 10 PAGE are used for paging up and down in ae lists 4 P While watching TV these buttons Ee the Channel Browser and tune to the previous next channel in the channel history 1 page 42 12 Arrow buttons AV lt 4 gt When a menu is on screen these buttons select or adjust programming menus 13 VOL adjusts the volume level 14 CH AY cycles through programmed channels when no menu is on screen 1s page 44 15 EXIT closes on screen menus 16 INFO displays TV status information as well as program details when available t page 62 17 MUTE reduces or turns off the sound t page 52 18 CH RTN returns to the last viewed channel or source 1 page 44 19 RECALL displays TV status information t page 62 20 C CAPTION opens the closed caption audio selector cereenies page 50 The audio selector is not available for analog channels 21 PIC MODE selects the picture mode ts page 49 22 FREEZE freezes the picture Press again to restore the moving picture t page 48 23 PIC SIZE cycles through the picture sizes ts page 46 21 Chapter 3 Using the remote control Remote Control functional key chart REMOTE TV CABLE SAT DVD VCR PVR CONTROL KEY Teena am GE satelite Orion Recorder Toshiba PVR
44. or Pto select On Note If the Enable On Timer is set to Off other menus under On Timer cannot be selected To set the On Timer 1 From the APPLICATIONS menu highlight On Timer and press On Timer Enable On Timer On Input ANT CABLE Channel Volume Time until Power On Input To select video input source ANT CABLE Video 1 Video 2 ColorStream HD1 ColorStream HD2 HDMI 1 HDMI 2 HDMI 3 HDMI 4 or PC Channel To select the channel when the TV turns on Note When an external input is selected in the Input menu this feature cannot be selected Volume To set the volume when the TV turns on Time until Power On To set the time when the TV turns on from now with or P or the number buttons maximum of 12 hours and 50 minutes Note e While the On Timer is set to On the On Timer LED is turned on ts LED indications on page 73 e If you do not operate the TV for 1 hour after it is powered on by the On Timer feature the TV will automatically turn itself off To cancel the On Timer 1 From the APPLICATIONS menu highlight On Timer and press 2 Press A or W to select Enable On Timer 3 Press dor P to select Off 58 You can set the sleep timer to turn off the TV after a set length of time maximum of 12 hours and 50 minutes To set the sleep timer using the remote control Press 6 on the remote control to set the length of time until the TV turns off Repeatedly press
45. power to the equipment the user is encouraged to try to correct the interference by one or more of the following measures e Reorient or relocate the receiving antenna e Increase the separation between the equipment and the receiver Connect the equipment into an outlet on a circuit different from that to which the receiver is connected Consult the dealer or an experienced radio TV technician for help Caution Changes or modifications to this equipment not expressly approved by Toshiba could void the user s authority to operate this equipment ENERGY STAR User Information ENERGY STAR User Information Statement the factor default settings of this television meet ENERGY STAR requirements Enabling or changing certain features and functionality e g Picture Settings Auto Brightness Sensor Power On Mode may increase energy consumption possibly beyond the limits required for ENERGY STAR qualification To ensure your television is operating at optimal energy efficiency select Home mode during initial activation To return to Home mode settings select AutoView picture mode set the Auto Brightness Sensor to On mode and set the Power On mode to Power Saving AutoView mode is recommended for normal home use For more information see page 40 EZ ENERGY STAR qualified TV Products that earn the ENERGY STAR prevent green house PR gas emissions by meeting strict guidelines set by the U S Environmental
46. product s power cord inside a wall or similar enclosed area 20 Never modify this equipment Changes or modifications may void a the warranty and b the user s authority to operate this equipment under the rules of the Federal Communications Commission 21 i DANGER RISK OF SERIOUS PERSONAL INJURY DEATH OR EQUIPMENT DAMAGE Never place the TV on an unstable cart a stand or table The TV may fall causing F serious personal injury death or serious damage to the TV 22 To avoid damage to this product never place or store the TV in direct sunlight hot humid areas or areas subject to excessive dust or vibration 23 Always place the TV on the floor or a sturdy level stable surface that can support the weight of the unit To secure the TV use a sturdy strap from the hooks on the rear of the TV pedestal to a wall stud pillar or other immovable structure Make sure the strap is tight secure and parallel to the floor f r min Securement Clip Sturdy strap as short as possible AAN Securement Hooks PS Clip SS TV side 24 The apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids such as vases shall be placed on the apparatus 25 Never block or cover the slots or openings in the TV cabinet back bottom and sides Never place the TV e on a bed sofa rug or similar surface Lee i e too close to
47. the Television failing for a period of one 1 year after the date of original retail purchase DURING THIS PERIOD TCL WILL AT TCL S OPTION REPAIR OR REPLACE A DEFECTIVE PART WITH A NEW OR REFURBISHED PART WITHOUT CHARGE TO YOU FOR PARTS OR LABOUR a FOR TELEVISIONS 32 INCHES OR LESS YOU MUST DELIVER THE ENTIRE TELEVISION TO A TCL TELEVISION AUTHORIZED SERVICE PROVIDER ASP YOU MUST PAY FOR ALL TRANSPORTATION AND INSURANCE CHARGES FOR THE TELEVISION TO AND FROM THE ASP b FOR TELEVISIONS OVER 32 INCHES During this period ASP personnel will come to your home when warranty service is required Depending on the type of repair required the service will either be performed in your home or the Television will be taken to an ASP for repair and returned to your home at no cost to you IN HOME SERVICE ONLY APPLIES WITHIN 100 KILOMETERS OF AN ASP IF YOU ARE NOT WITHIN 100 KILOMETERS OF AN ASP YOU MUST DELIVER THE ENTIRE TELEVISION TO AN ASP YOU MUST PAY FOR ALL TRANSPORTATION AND INSURANCE CHARGES FOR THE TELEVISION TO AND FROM THE ASP Limited Warranty for Commercial Units TCL warrants Televisions that are used for any commercial or business purposes as follows all parts are warranted against material defects in materials or workmanship that result in the Television failing for a period of ninety 90 days after the date of original retail purchase DURING THIS PERIOD TCL WILL AT TCL S OPTION REPAIR OR REPLACE THE DEFEC
48. the menu page 41 Note These functions depend on the devices connected 59 Chapter 6 Using the TV s features Amplifier VOLUME and MUTE controls With your TV s remote control you can adjust or mute the sound volume of your amplifier First set the MODE SELECT switch on the remote control to TV eC adjust the volume level ure turns off the sound Note e To use this function Set Speaker Preference to Amplifier in the REGZA LINK Setup menu Confirm that a connected REGZA LINK device such as DVD player etc is selected for the Amplifier input source e You can also use this function when the amplifier is connected to the TV s DIGITAL AUDIO OUT terminal not HDMI connection In this case select a digital audio input mode on the amplifier e These functions depend on the device connected Other REGZA LINK functions When the Enable REGZA LINK and each item in the REGZA LINK Setup menu are set to On the following functions will be enabled Item Description TV Auto If a REGZA LINK device is turned on the Power On TV turns on automatically If the TV is turned off the TV will send a Auto Standby message to turn off all of the REGZA LINK devices connected to the TV If Amplifier Control is set to On you can ampin er adjust the sound volume or turn off the sound using the remote control From this item you can set your audio output preference to th
49. the picture mode of same name Selection Pressing lt Pressing gt Backlight darker lighter Contrast lower higher Brightness darker lighter Color paler deeper Tint reddish greenish Sharpness softer sharper Backlight This feature adjusts the brightness of the entire screen When in video mode and no signal is input this will automatically be set to 0 Settings are stored in memory Note Some menus cannot be adjusted when the picture mode is set to AutoView To adjust the picture quality 1 From the PICTURE menu highlight picture ay you want to adjust Backlight Contrast rightness Color Tint or Sharpness 2 Ones you select the desire item press lt or P to adjust the setting as described in the table above and then press xm Note The picture quality you adjusted affects the current input only You can adjust the picture quality for each input and source for photo viewing To revert to the factory defaults 1 Select the picture mode you want to reset 2 From the PICTURE menu highlight Reset and press i 3 Aconfirmation message will appear Press or to select Yes and then press a 49 Chapter 6 Using the TV s features Using the TheaterLock feature Using the closed caption mode The TheaterLock feature allows you to lock items in the PICTURE menu that affect the picture display These items will be grayed out and unavailable
50. to select Input Lock 4 Press dor P to select Video Video or Off Mode Description Locks Video 1 Video 2 ColorStream HD1 HD2 HDMI 1 HDMI 2 HDMI 3 HDMI 4 and PC Video Locks Video 1 Video 2 ColorStream HD1 HD2 HDMI 1 HDMI 2 HDMI 3 HDMI 4 PC and channels 3 and 4 e Select Video if you play video tapes via an ANT CABLE input Video Off Unlocks all video inputs and channels 3 and 4 56 Using the GameTimer You can use the GameTimer to set a time limit for playing a video game 30 120 minutes When the GameTimer expires the TV enters Input Lock mode and locks out the input source for the video game device 1 From the PREFERENCES menu highlight Parental Control and Locks and press 2 Enter your four digit PIN code 3 Press V or A to select GameTimer and then press lt or P to select 30 60 90 or 120 minutes To cancel the GameTimer Select Off in step 3 above To deactivate the Input Lock once the GameTimer has activated it Set the Input Lock to Off c Using the input lock feature as described above Note e A message will appear when 10 minutes 3 minutes and 1 minute remain on the GameTimer e If the TV loses power with time remaining on the GameTimer when power is restored the TV will enter Input Lock mode as if the GameTimer had been activated and you will have to deactivate the Input Lock as described above Using the panel lock fe
51. will be illuminated by the LED backlight See Selecting the TOSHIBA Illumination mode on page 39 for additional information 2 Remote sensor Point the remote control toward this remote sensor Effective range 16 4 ft 5m 3 On Timer LED See Setting the On Timer on page 58 4 Power LED See LED indications on page 73 for additional information 5 VIDEO 2 IN The side panel A V connections are referred to as VIDEO 2 and include standard A V connections 6 POWER Press to turn the TV on and off If the TV stops responding to the controls on the remote control or TV control panel and yon cannot turn off the TV press and hold the POWER button on the control panel for 5 or more seconds to reset the TV 7 VOLUME These buttons adjust the volume level ARROWS lt gt When a menu is on screen these buttons function as left right menu navigation buttons 10 Control panel 8 INPUT ENTER a tar to change the source you are viewing ANT CABLE VIDEO 1 VIDEO 2 ColorStream HD1 ColorStream HD2 HDMI 1 HDMI 2 HDMI 3 HDMI 4 PC When a menu is on screen the INPUT button on the TV s control panel functions as the ENTER button 9 CHANNEL AY When no menu is on screen these buttons change the channel programmed channels only s page 37 ARROWS v en a menu is on screen these buttons function as up down menu navigation buttons 10 MENU BAC
52. 0035 30081 30000 30043 30593 31593 31781 30240 30000 30002 30593 31593 31972 31972 30000 30104 30048 30081 30000 30067 30041 30008 30000 30067 30041 30035 30162 30037 30000 30035 30037 30000 30240 30041 30208 30479 30000 30002 30060 30041 30202 30278 30618 30636 30739 31996 30240 30000 30208 30037 30240 30240 30045 30000 30043 30209 30041 30062 30210 30845 31008 31145 31972 31996 30278 30037 30240 31972 30037 30045 30278 30020 30240 30045 30184 30038 30072 30067 30041 30008 Chapter 3 Using the remote control Video Concepts Videomagic Videosonic Viewsonic Villain Voodoo Wards Wharfedale White Westinghouse World XR 1000 Yamaha Zenith ZT Group PVRs Brand ABS Alienware CyberPower Dell DirecTV Gateway Hewlett Packard Howard Computers HP Hughes Network Systems Humax Hush iBUYPOWER Linksys Media Center PC Microsoft Mind Niveus Media Northgate Panasonic Philips RCA ReplayTV 30045 30061 30210 30037 30240 30000 30072 31972 30000 31972 30060 30035 30037 30048 30047 30081 30033 30240 30045 30000 30042 30043 30041 30072 30038 30149 30046 30062 30479 30760 30593 30000 30209 30072 30278 30479 30209 30002 30479 30035 30240 30000 30072 30208 30041 30038 30037 30039 30033 30000 30209 30041 30278 30479 31139 31479 31972 Code
53. 029 50028 Sonic Frontiers 50157 50037 50190 Sony 50490 50000 Brand Code KLH 51711 50100 51364 Adcom 40577 Krell 50157 50185 Bose 40674 Linn 50157 Sugden 50157 Carver 40892 LXI 50179 Sylvania 50157 Curtis Mathes 40300 Magnavox 50157 50274 Symphonic 50180 GE 40078 Marantz 50626 50029 TAG McLaren 50157 Harman Kardon 40892 50157 50180 Tandy 50032 Jvc 40331 Matsui 50157 Tascam 50420 Left Coast 40892 McIntosh 50256 Teac 50490 50180 Marantz 40892 MCS 50029 30420 NEC 40264 Memorex 50000 50032 Technics 50029 50303 Optimus 40013 40300 30177 p020 Techwood 50303 40823 Thule Audio 50157 Philips 40892 Micromega 50157 Victor 50072 Pioneer 40013 40300 are 20000 Wards 50032 50157 40823 Mission 50157 50053 50087 Polk Audio 40892 Modulaire 50000 50032 50179 50087 50179 Yamaha 50490 50036 RCA 40013 40300 50180 50420 51292 pee 50468 Y 50000 Realistic 40013 MTC 50420 OE Shure 40264 NSM 50157 i Sony 40683 40815 Onkyo 51327 50101 Audio Amprunars Soundesign 40078 Optimus 50000 50032 Brand Code Victor 40331 50037 50087 ADC 40531 Wards 40078 40013 50179 50420 Aiwa A1405 Wiss Yamaha 40354 40133 50468 40121 41388 Panasonic 50029 50303 41641 CD players 50388 50752 Rica 41390 Parasound 50420 AMC 41077 Brand Code Penney 30023 Anam 41609 41074 Acoustic Research 50420 Philips WR 50157 Apex Digital 41774 Ai 50157 n Pioneer 51062 50032 Arami ae Arcam 50157 51087 50468 Audiotronic 41189 Audio Research 50157 PolkAudio 5015
54. 0U Width 53 5 8 inches 1 362 mm Height 35 1 2 inches 901 mm Depth 15 5 8 inches 396 mm Mass weight 42ZV650U 48 5 Ibs 22 5 kg 47ZV650U 57 3 Ibs 26 0 kg 55ZV650U 79 4 lbs 36 5 kg Operating conditions Temperature 32 F 95 F 0 C 35 C Humidity 20 80 no moisture condensation Supplied Accessories eRemote control with two size AA alkaline batteries e Owner s manual this book eSecurement Cli Use this clip to attach the TV to a wall stud pillar or other immovable structure ce item 23 on Po 3 and instructions on page 5 leaning cloth to clean the ca inet and control panel Chapter 9 Appendix Acceptable signal formats for PC IN and HDMI terminals PC IN signal formats Note e The PC IN on this TV only accepts the signal formats which are compliant with VESA DMT as shown in the table below Since some PCs input signals which are different from the resolution and frequency described in the table below the following phenomenon may occur incorrect display false format detection picture position failure blur or judder In this case set the monitor output format on your PC to conform to any signals in the table below e The signals whose vertical frequency are 56Hz 70Hz 72Hz or 75Hz are converted to 60Hz signal e When you connect a PC to this TV it is recommended to set the refresh rate of your PC to 60Hz e The PC IN on this TV does not accept the Sync on Green Composit
55. 21 20717 20675 20821 21268 Symphonic Tatung Teac Technics Technika Tevion Theta Digital Thomson Tivo Toshiba Unimax Universum Urban Concepts US Logic V Venturer Visio Vizio Xbox Yamaha Zenith Zeus Zoece DVD R Brand Accurian Apex Digital Aspire Digital Coby CyberHome Funai Gateway Go Video iLo JVC LG LiteOn Magnavox Panasonic Philips Pioneer Polaroid RCA Samsung Sensory Science Sharp Chapter 3 Using the remote control 20675 20821 21268 21334 20770 20571 20717 20790 20490 20703 20770 20651 20571 20522 20511 21503 21588 20503 20573 20539 20695 21045 21154 21503 21515 21588 21769 21854 20770 20591 20503 20539 20839 21064 21226 20790 21064 21226 21064 21226 20522 21708 20490 20539 20545 20503 20591 20741 20869 20784 21265 Code 21416 21056 21168 21086 21129 21502 20675 21334 21073 21158 20741 21158 21304 21730 21348 21164 20741 21158 21416 21440 20646 20675 20490 20646 20631 21086 20522 20490 21158 20675 Sony Sylvania Toshiba Zenith DVD VCR Combo Brand Allegro Apex Digital Broksonic CineVision Daewoo Emerson Funai Go Video GoldStar Hitachi JVC LG Magnavox Memorex Panasonic Philips Polaroid Presidian RCA Samsung Sansui Sanyo Sharp Sony Sylvania Symphonic Toshiba Zenith Emerson Funai Hitachi Magnavox Presidian RCA
56. 35 40842 41298 41320 41531 41023 40074 40014 40121 40186 40531 41074 41366 41497 41308 41518 40309 41288 41316 41548 41633 41763 41764 41189 41269 40189 40891 41266 41023 40014 40150 40531 40630 41384 41508 40189 41289 41254 41609 41023 41609 41254 40531 41074 41390 41511 41609 40121 40186 40189 41295 41304 41500 41189 40189 41251 41469 41801 40186 41077 41811 Chapter 3 Using the remote control Sony Stereophonics Sunfire Teac Technics Thorens Toshiba Venturer Victor Wards Yamaha Zenith 41058 41441 41258 41622 41658 41758 41858 41023 41313 41074 41390 41308 41518 40309 41633 41189 40135 40842 41788 41390 40074 40189 40014 41023 40176 40186 41176 41276 41331 41375 41293 33 Chapter 4 Menu layout and navigation Main menu layout eon lem Page Menu Language 36 To open the main menus illustrated below press oe ANT CABLE In 37 MER on the remote control or TV control panel 0 Auto Tuning 37 Icon Item Page Manual Tuning 37 Picture Mode 49 TV Settings 38 PICTURE Reset 49 Manual Setting 38 Backlight 49 AV Connection 61 Contrast 49 PC Settings 57 Brightness 49 Picture Position 48 Color 49 Quick Setup 36 Tint 49 Power On Mode 40 Sharpness 49 Location 39 Advanced Picture Settings 63 System Information 40
57. 384 x 16384 pixels Total number of pixels 10 000 000 Maximum photo size 9 MB Total number of files Less than 2000 per folder Chapter 8 Troubleshooting General troubleshooting Before calling a service technician please check this chapter for a possible cause of the problem and some solutions you can try Black box on screen e The closed caption feature is set to one of the Text modes T1 T2 T3 or T4 Set the closed caption feature to Off c page 50 TV stops responding to controls e If the TV stops responding to the controls on the remote control or TV control panel and you cannot turn off the TV press and hold the POWER button on the TV control panel for 5 or more seconds to reset the TV Other problems e If your TV s problem is not addressed in this Troubleshooting section or the recommended solution has not worked use the Restore Factory Defaults procedure ns page 40 TV will not turn on e Make sure the power cord is plugged in and then press 8 e The remote control batteries may be dead Replace the batteries or try the control panel buttons Picture problems General picture problems e Check the antenna cable connections cs gt Chapter 2 e Press on the remote control or the TV and select a valid video input source ts page 41 If no device is connected to a particular input on the TV no picture will display when you select that particular input source For device connection details
58. 40 31972 30240 31972 30042 30105 30060 30048 30047 30000 30042 30067 30043 30041 30061 30807 30035 30048 30072 30240 30000 30072 30000 30039 30000 30072 30240 30104 30104 30067 30041 30038 30072 30037 30278 30037 30278 30240 31972 30240 31972 30035 30162 30104 30222 Chapter 3 Using the remote control Optimus Optonica Orion Panama Panasonic Penney Pentax Philco Philips Pilot Pioneer Polk Audio Portland Presidian Profitronic Proscan Protec Protech Pulsar Pulser Quarter Quartz Quasar RadioShack Radix 31062 30035 30162 30037 30048 30047 30240 30000 30104 30062 30432 30593 31048 31162 31262 30062 30184 30240 30000 30104 30121 30209 30002 30278 30208 30479 31479 30035 31062 30035 30162 30000 30020 30225 30614 30616 31035 31162 31262 30035 30162 30037 30047 30081 30240 30000 30042 30067 30038 31035 31237 30042 30105 30035 30081 30000 30209 30479 30035 30162 30048 30081 30045 30000 30209 30062 30616 30618 30739 31081 31181 30037 30162 30081 30042 3006 30081 30278 30020 31593 30240 30060 30202 30760 31060 30000 30072 30072 30039 30240 30278 30240 30046 30035 30047 30046 30035 30162 30002 31035 31162 30035 30162 30037 30048 30047 30240 30000 30104 30046 30062 31037 31162 30037 Randex RCA Realistic ReplayTV Ricavision Runco
59. 49 11749 10775 10724 10819 11076 10722 10099 11442 11142 11442 10869 Proscan RadioShack RCA Samsung SKY Sony Star Choice Star Trak Thomson Tivo Toshiba UltimateTV Ultrasat Uniden Voom Zenith DVDs Brand 3D LAB Accurian Advent Afreey Aiwa Akai Alba Alco Allegro Apex Digital Arrgo Aspire Digital Audiovox Axion Blaupunkt Blue Parade Blue Sky Bose Brandt Broksonic 10392 10566 10566 10775 10869 10392 10566 11142 10775 10855 10143 11392 11442 11377 11142 11276 11108 11109 11442 11609 10099 10639 11639 11640 10869 10772 10869 10392 10566 11142 11442 10749 11749 10790 10819 11285 11286 11287 11289 11857 11858 11392 11640 11806 10724 10722 10869 11856 Code 20503 20539 21072 21416 21016 20698 20641 20695 20705 20770 20899 21089 20672 20717 20790 20869 20533 20672 20717 20755 20794 20796 20797 20830 21004 21020 21056 21061 21100 21023 21168 21407 20717 20790 21041 21071 21072 21121 21122 21071 21072 20717 20571 20695 21895 20651 20695 20868 California Audio Labs Celestial Centrex Cinea CineVision Citizen Clairtone Coby Craig Creative Curtis Mathes CyberHome Cytron Daewoo Dansai Decca Denon Denver Desay Digitrex Disney DiViDo Dual Durabrand DVD2000 Electrohome Emerson Enterprise Entivo Enzer ESA Firstline Fi
60. 7 Audiovox 41390 Burmester 50420 Proceed 50420 B amp K 40701 40820 Cairn 50157 Proton 50157 Bose 41229 40639 California Audio 50029 50303 QED 50157 41253 41933 Labs Quad 50157 Cairn 40189 Cambridge 50157 Capetronic 4053 Soundworks Quasar 50029 z Carver 50157 50179 RadioShack 50000 50032 Saa ODAS Curtis Mathes 50032 50420 50468 Curtis Mathes 40014 Denon 50003 50034 RCA 51062 50032 Denon 41360 40121 DKK 50000 50053 50179 40771 41142 DMX Electronics 50157 50420 50468 41306 Fisher 50000 50179 Realistic 50000 50032 Emerson 40531 Garrard 50420 50087 50179 Fisher 41801 Genexxa 50032 Ee 50420 Grundig 40189 Grundig 50157 Revox 50157 Harman Kardon Aea RA Hafler 30173 Rotel 50157 50420 41304 41306 Harman Kardon 50100 50157 SAE 50157 Hitachi 41273 41801 BRE Sansui 50000 50157 Hitachi 50032 am 32 Integra JBL JVC Kawasaki Kenwood KLH Koss LG Linn Liquid Video Magnavox Marantz McIntosh Micromega Mitsubishi Myryad Nakamichi Onkyo Optimus Oritron Panasonic Philips Pioneer Polaroid Polk Audio Proscan RadioShack RCA Realistic Revox Samsung Sansui Sanyo Sharp Sherwood Sirius 40135 40842 41298 41320 40110 41306 41058 40074 41374 41495 41811 41390 41313 41570 41569 40186 41390 41428 41366 41497 41293 40189 41497 41189 41269 40189 40531 41266 41514 41189 41269 40189 40891 41289 41289 41189 40189 41393 41189 41313 401
61. 78 30037 30060 30035 30045 30278 30000 30072 30037 30047 30240 30072 30271 30000 30072 Chapter 3 Using the remote control Crosley Crown Curtis Mathes Cybernex CyberPower Daewoo Daytron Dell Denon Derwent DirecTV Dual Durabrand Dynatech Electrohome Electrophonic Emerald Emerex Emerson Fisher Fuji Fujitsu Funai Garrard Gateway GE Gemini Genexxa Go Video GoldStar 30035 30081 30000 30149 30072 30278 30060 30035 30162 30240 30000 30041 30278 30432 30760 31035 30240 31972 30037 30045 30278 30020 30046 30561 31278 30037 30278 30020 31972 30081 30042 30041 30739 30000 30039 30038 30240 30000 30060 30037 30240 30000 30043 30209 30061 30037 30184 30121 30032 30037 30184 30240 30000 30121 30043 30209 30002 30278 30202 30208 30061 30479 30561 30593 31278 31479 31593 30039 30047 30000 30104 30046 30035 30033 30000 30037 30000 30072 30278 30593 31593 30000 31972 30060 30035 30048 30240 30000 30149 30202 30760 30807 31035 31060 30060 30037 30000 30278 30240 30432 30526 30614 30035 30037 30039 30000 30278 30038 31237 Goodmans Gradiente Granada Grundig Harley Davidson Harman Kardon Harvard Harwood Headquarter Hewlett Packard HI Q Hitachi Howard Computers HP Hughes Network Systems Humax Hush Hytek iBUYPOWER ITT Nokia Janeil Jensen JVC KEC Kenwood KL
62. 8 10525 10000 10637 11305 10317 11877 10877 10144 10533 10012 10000 10000 10883 11256 10276 10279 10273 10000 10003 10144 11877 10877 10477 10237 10003 10000 10008 10012 10017 11006 10144 10003 10014 10014 10637 10276 10883 11256 10012 10003 10000 10883 10276 10003 10014 10276 10003 10008 10017 10883 10000 10883 10883 10883 10000 10525 10899 10017 Satellite receivers Brand AlphaStar Bell ExpressVu Chaparral Coolsat Crossdigital DirecTV Dish Network System Dishpro Echostar Expressvu Fortec Star Funai GE General Instrument GOI Hitachi Houston HTS Hughes Network Systems Humax Innova Jerrold JVC LG Magnavox McIntosh Memorex Mitsubishi Motorola Netsat Next Level Optimus Panasonic Pansat Paysat Philips Pioneer Primestar Code 10772 10775 10216 11806 11109 11377 10392 10566 10639 11639 11142 10247 10749 11749 10724 10819 11856 11076 11108 10099 11109 11414 11442 11609 11392 11640 11505 11005 10775 11170 11775 11505 11005 10775 11775 11505 11005 10775 11170 11775 10775 11775 11821 11377 10392 10566 10869 10775 11775 10749 10819 10775 10775 11775 11142 10749 11749 11442 11790 10099 10869 10775 11170 11775 11226 11414 10724 10722 10869 10724 10749 10869 10099 10869 10724 10247 10701 11807 10724 11142 107
63. Brand A Mark ABC Accuphase Acorn Action Active Americast Amino Archer BCC Bell amp Howell Bell South British Telecom Century Citation Clearmaster ClearMax Cool Box Coolmax Digeo Digi Director Dumont Emerson Fosgate GE General Instrument Gibralter GMI GoldStar Hamlin Hitachi Insight Jebsee Jerrold Memorex Mitsubishi 26 Code 01524 Code 10008 10144 10237 10003 10008 10014 10017 10003 10014 10017 10237 10237 10237 10899 11822 10237 10276 10014 10899 10003 10008 10017 10883 10883 10883 10883 11187 10637 10476 10637 10014 10276 10144 10476 10810 10276 10003 10012 10014 10003 10883 10144 10009 10273 10003 10008 10009 10476 10810 10014 10476 10810 10276 10003 10012 10014 10000 10003 Motorola Multitech Myrio Nova Vision Novaplex NSC Oak Pace Panasonic Panther Paragon Penney Philips Pioneer Prism Pulsar Quasar RadioShack RCA Regal Runco Samsung Scientific Atlanta Sony Sprucer Starcom Stargate Storm Supercable Supermax Thomson Tocom Torx Toshiba Tristar United Cable US Electronics V2 Videoway Viewmaster Vision Vortex View Zenith Chapter 3 Using the remote control 11376 10476 10810 10276 11187 11254 10014 11106 10883 11822 10008 10008 10017 10012 10637 10017 11877 10877 10237 10008 10000 10008 10144 10107 10637 10000 1000
64. C LEGAL RIGHTS AND YOU MAY ALSO HAVE OTHER RIGHTS WHICH MAY VARY FROM STATE TO STATE IN THE U S A SOME STATES OF THE U S A DO NOT ALLOW LIMITATIONS ON THE DURATION OF AN IMPLIED WARRANTY WHEN AN ACTION MAY BE BROUGHT OR THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES THEREFORE THE ABOVE PROVISIONS MAY NOT APPLY TO YOU UNDER SUCH CIRCUMSTANCES 77 Chapter 9 Appendix Limited Canadian Warranty for Toshiba Brand Flat Panel Televisions Toshiba of Canada Limited TCL makes the folowing imed warranties to original consumers in Canada THESE LIMITED WARRANTIES EXTEND TO THE ORIGINAL CONSUMER URCHASER OR ANY PERSON RECEIVING THIS TOSHIBA BRAND FLAT PANEL TELEVISION the TELEVISION S or Television s AS A GIFT FROM THE ORIGINAL CONSUMER PURCHASER AND TO NO OTHER PURCHASER OR TRANSFEREE TELEVISIONS PURCHASED IN CANADA AND USED ANYWHERE OUTSIDE OF CANADA INCLUDING WITHOUT LIMITATION THE UNITED STATES AND MEXICO ARE NOT COVERED BY THESE WARRANTIES TELEVISIONS PURCHASED ANYWHERE S OF CANADA INCLUDING WITHOUT LIMITATION THE UNITED STATES AND EXICO AND USED IN CANADA ARE NOT COVERED BY THESE WARRANTIES Limited One 1 Year Warranty on Parts and Labour Subject to the more limited warranty if the Television is used for any commercial or business purposes as set out below TCL warrants the Television and its parts against material defects in materials or workmanship that result in
65. C to this TV it is recommended to set the refresh rate of your PC to 60Hz Format Resolution V Frequency H Frequency Pixel Clock Frequency VESA Standard VGA 640 x 480 59 940Hz 31 469kHz 25 175MHz e 72 809Hz 37 861kHz 31 500MHz 75 000Hz 37 500kHz 31 500MHz SVGA 800 x 600 60 317Hz 37 879kHz 40 000MHz 72 188Hz 48 077kHz 50 000MHz e 75 000Hz 46 875kHz 49 500MHz 1280 x 1024 56 250Hz 35 156kHz 36 000MHz XGA 1024 x 768 60 004Hz 48 363kHz 65 000MHz 70 069Hz 56 476kHz 75 000MHz 75 029Hz 60 023kHz 78 750MHz WXGA 1280 x 768 59 995Hz 47 396kHz 68 250MHz o 59 870Hz 47 776kHz 79 500MHz 74 893Hz 60 289kHz 102 250MHz o 60 015Hz 47 712kHz 85 500MHz SXGA 1280 x 1024 60 020Hz 63 981kHz 108 000MHz e 75 000Hz 79 976kHz 135 000MHz Cv 480i 720 x 480i 59 940 60Hz 15 734 15 750kHz 27 000 27 027MHz 480p 720 x 480p 59 940 60Hz 31 469 31 500kHz 27 000 27 027MHz 720p 1280 x 720p 59 940 60Hz 44 955 45 000kHz 74 176 74 250MHz 1080i 1920 x 1080i 59 940 60Hz 33 716 33 750kHz 74 176 74 250MHz 1080p 1920 x 1080p 23 976 24Hz 26 973 27 000kHz 74 176 74 250MHz 59 940 60Hz 67 433 67 500kHz 148 352 148 500MHz 76 Chapter 9 Appendix Limited United States Warranty for LCD Televisions 26 and Larger Toshiba America Consumer Products L L C TACP makes the following limited warranties to original consumers in the United States THESE LIM
66. CAL PPLICATION TCL ITS AFFILIATES ADRs AND ASPs HEREBY SCLAIM ANY AND ALL LIABILITY DAMAGES AND ONSEQUENCES ARISING OUT OF THE SERVICE OR REFUSAL SERVICE SUCH TELEVISION AND FURTHER DISCLAIM ANY D ALL LIABILITY CONSEQUENCES AND DAMAGES THAT AY ARISE OR RESULT FROM THE USE OF THE TELEVISION IN ANY CRITICAL APPLICATIONS General Provisions If and to the extent that any provision of this limited warranty should generally be found to be unenforceable the unenforceable provision shall be severed from the warranty and deemed not to form part of the warranty The remaining provisions of this warranty shall be and remain valid and enforceable If and to the extent that JDP AQUL ggg gt gz any provision of this limited warranty as it relates to any of the Related Parties is found to be invalid or unenforceable in respect of that party the Excluded Party the Excluded Party shall be deemed to be severed or excluded from the provision and the provision shall remain valid enforceable and applicable in respect of the other or remaining Related Parties To the extent permitted by law this limited warranty shall be governed and construed in accordance with the laws of Ontario If there is any inconsistency between this limited warranty on the one hand and any statement in the packaging of the Television or in any other document enclosed with or used in the context of the promotion or sale of the Televisi
67. Copyright Laws of the United States and other countries and may subject you to civil and criminal liability Chapter 6 Using the TV s features Adjusting the picture Selecting the picture mode You can select your desired picture settings from the following modes as described below Mode Picture Quality Automatically adjusts picture settings AutoView based on ambient light conditions and input signal content Sports Bright and dynamic picture Standard Standard picture settings Movie Lower contrast for darkened room Designed for playing a video game requiring split second timing between Game the on screen display and input from the controller PC Designed for viewing of PC tables and documents Note e Because the AutoView mode automatically adjusts picture settings based on ambient light conditions and input signal content some menus will be grayed out when it is selected e PC mode is available for HDMI and PC inputs only not displayed for other input sources Game mode cannot be turned on when the ANT CABLE input is selected 1 From the PICTURE menu highlight Picture Mode 2 Press 4orP to select the picture mode you prefer and press Note The picture mode you select affects the current input only You can select a different picture mode for each input Adjusting the picture quality The picture quality you adjusted under a certain picture mode is saved to
68. H Kodak KTV LG Linksys Lloyd s Loewe Logik Lumatron Luxor LXI M Electronic Magnasonic 30037 30081 30000 30072 30278 30020 30062 30000 30008 30081 30042 30081 30000 30081 30038 30072 30072 30046 31972 30035 30047 30000 30035 30037 30045 30000 30042 30041 30089 30105 31972 31972 30042 30739 30739 31972 30047 30000 30072 31972 30240 30041 30240 30067 30041 30067 30041 30008 30061 31162 30037 30278 30067 30041 30038 30046 30072 30035 30037 30000 30037 30240 30038 31037 31972 30240 30000 30072 30038 30208 30081 30240 30000 30072 30278 30046 30106 30037 30000 30042 30067 30240 30037 30240 30000 30072 30278 30020 30593 31278 29 Magnavox Magnin Marantz Marta Matsui Matsushita Media Center PC MEI Memorex Metz MGA MGN Technology Microsoft Midland Mind Minolta Mitsubishi Motorola Movie Walker MTC MTX Multitech NAD NEC New Tech Nikko Nikkodo Nishi Niveus Media Noblex Northgate Olympus Onkyo 30 30035 30037 30048 30039 30081 30240 30000 30149 30563 30593 30618 31593 31781 30240 30035 30081 30038 30062 30037 30037 30209 30035 30162 30081 31162 31972 30035 30035 30162 30037 30048 30039 30047 30240 30000 30104 30209 30072 30278 30062 30046 30307 30479 31037 31162 31237 31262 30037 30060 30240 30043 30061 302
69. I terminal use an HDMI cable Separate analog cables are not necessary t page 12 TV upper back panel HDMI IN HDMI 1 2 3 o amp N IN PCIN OOO O00003 PC audio cable Computer PC audio output Ol MEE The HDMI input can accept and ay VGA SVGA XGA WXGA SXGA 480i 60Hz 480 60Hz 720p 60Hz 1080i 60Hz and 1080p 24Hz 60Hz signal formats For detailed signal specifications see page 76 Note e The edges of the images may be hidden e If receiving a 480i HDMI 480p HDMI 720p 1080i or 1080p signal program Native mode scales the video to display the entire picture within the borders of the screen i e NO overscanning 19 Chapter 3 Using the remote control Preparing the remote control for use Installing the remote control batteries Your TV remote control can operate your TV and many other devices such as cable converter boxes satellite receivers VCRs DVD players and HTIBs home theater in a box even if they are different brands If you have a Toshiba device Your TV remote control is preprogrammed to operate most Toshiba devices n page 22 If you have a non Toshiba device or a Toshiba device that the remote control is not preprogrammed to operate You can program the TV remote control so it will operate the other device n pages 24 20 1 Slide the battery cover off the back of the remote co
70. ICTURE menu highlight Advanced Picture Setings and press 2 Press A or V to select Noise Reduction and press a 3 Press A or to highlight the MPEG NR 4 Press 4 or P to select either Off Low Middle or High and press Note If the Picture Mode is set to Game this feature will be grayed out Using DNR DNR enables you to soften the screen representation of a weak signal to reduce the noise effect 1 From the PICTURE menu hi hlight Advanced Picture Settings and press 2 Press A or W to select Noise Reduction and press amp 3 Press A or W to select DNR 4 Press qorP to select Low Middle High Auto or Off and press Note e If the Picture Mode is set to Game this feature will be grayed out e The differences may not always be noticeable for the best result use lower settings as picture quality can be lost if the setting is too high Chapter 7 Using the TV s advanced features Using the Auto Brightness Sensor When the Auto Brightness Sensor feature is set to On the TV will automatically optimize the backlighting levels to suit ambient light conditions 1 From the PICTURE menu highlight Advanced Picture Settings and press 2 Press A or W to select Auto Brightness Sensor Settings and press 3 Press A or to highlight Auto Brightness Sensor 4 Press or P to select On or Off and press Note If the Picture Mode is set to AutoView this feature will be a
71. IO L3R 8H2 CANADA TEL 905 470 5400 MANUFACTURED BY TOSHIBA ELECTROMEX S A DE C V AutoView Channel Browser DynaLight ColorMaster Resolution SurfLock TheaterLock ClearScan 240 and THINC are trademarks of Toshiba America Consumer Products L L C ColorStream GameTimer and TheaterWide are registered trademarks of Toshiba America Consumer Products L L C REGZA and REGZA LINK are registered trademarks of Toshiba Corporation 0903 TOSHIBA
72. ITED WARRANTIES EXTEND TO THE ORIGINAL CONSUMER PURCHASER OR ANY PERSON RECEIVING THIS LCD TELEVISION AS A GIFT FROM THE ORIGINAL CONSUMER PURCHASER AND TO NO OTHER PURCHASER OR TRANSFEREE LCD TELEVISIONS PURCHASED IN THE U S A AND USED ANYWHERE OUTSIDE OF THE U S A INCLUDING WITHOUT LIMITATION CANADA AND MEXICO ARE NOT COVERED BY THESE WARRANTIES LCD TELEVISIONS PURCHASED ANYWHERE OUTSIDE OF THE U S A INCLUDING WITHOUT LIMITATION CANADA AND MEXICO AND USED IN THE U S A ARE NOT COVERED BY THESE WARRANTIES Limited One 1 Year Warranty on Parts and Labor TACP warrants this LCD Television and its parts against defects in materials or workmanship for a period of one 1 year after the date of original retail purchase DURING THIS PERIOD TACP WILL AT TACP S OPTION REPAIR OR REPLACE A DEFECTIVE PART WITH A NEW OR REFURBISHED PART WITHOUT CHARGE TO YOU FOR PARTS OR LABOR During this period TACP Authorized Service Station personnel will come to your home when warranty service is required Depending on the type of repair required the service will either be performed in your home or the LCD Television will be taken to a TACP Authorized Service Station for repair and returned to your home at no cost to you Rental Units The warranty for LCD Television rental units begins on the date of the first rental or thirty 30 days after the date of shipment to the rental firm whichever comes first Limited Warranty for Commercial
73. K Press to access the menu system i page 35 When a menu is on screen the MENU button on the TV s control panel functions as the BACK button 11 USB terminal For use when inserting a USB device 12 HDMI IN High Definition Multimedia Interface HDMI 4 input receives digital audio and uncompressed digital video from an HDMI device or uncompressed digital video froma DVI device HDMI connection is necessary to receive 1080p signals 13 SD card slot For use when inserting an SD memory card Press in SD memory card to insert and take SD memory card out of the SD card slot to remove Chapter 1 Introduction TV back panel connections For an explanation of cable types and connections see pages 12 19 HDMI IN HDMI 1 2 3 U TV back Power cord e Strap 9 10 SERVICE ONLY ANT CABLE HDMI IN High Definition Multimedia 6 PC HDMI 1 AUDIO IN PC audio input Interface input receives digital audio and terminal is shared with HDMI 1 analog audio uncompressed digital video from an HDMI input terminal and its use can be configured in device or uncompressed digital video from a DVI the AV Connection menu is page 57 device Also see item 6 HDMI connection is 7 PC IN For use when connecting a personal necessary to receive 1080p signals computer ColorStream HOI mid Color
74. K device HDMI problems For HDMI cables e Make sure the HDMI cables with the HDMI Logo HONI are used cs page 12 For Deep Color e You should need to use High Speed HDMI cable to work properly Normal HDMI cable or DVI cable may not work with this option ns page 16 For Legacy HDMI source e Some of legacy HDMI sources may not work properly with latest HDMI TV products due to new standard adoption Please try to set Off the HDMI settings Deep Color Lip Sync RGB Range INSTAPORT ns page 61 Your legacy HDMI source should operate properly with this TV products Media Player problems e Make sure that devices are connected correctly e If you connect a USB device with separate cable or through USB hub the TV does not recognize the USB device 72 Chapter 8 Troubleshooting LED indications The Power and On Timer LED lights on the TV front indicate the TV s status as described below TV front ON TIMER POWER On Timer Power LED Indication Power LED e Green is ON solid The TV is operating properly e Orange is ON solid Standby with Power On Mode set to Fast See Selecting the Power On Mode a page 40 e Green blinks three times TV is powering up Wait several seconds until the green LED stops blinking e Green blinks Abnormal operation of BUS line Turn OFF the TV and unplug the power cord Plug the power cord in again and turn ON the TV e
75. MI 4 From the SETUP menu highlight AV Connection and press amp Press A or W to select HDMI Settings Press A or W to highlight the item you want to set a RO N Press lt or P to select your desired setting To set the HDMI audio mode 1 From the SETUP menu highlight AV Connection and press 6 First press A or W to select PC HDMI 1 Audio Press lt or P to select HDMI 1 to make enable the HDMI 1 Audio Continue to press press A or W to select HDMI 1 Audio Finally press lt or P to select Auto Digital or Analog Auto is the recommended mode a A ON AV Connection PC HDMI 1 Audio HDMI 1 Audio HDMI Settings Digital Audio Output Mode Description When viewing the HDMI 1 input if digital audio from the HDMI input is available it will be output If not the TV will automatically detect and output analog audio from the PC HDMI 1 Audio input Auto When viewing the HDMI 1 input digital audio from the HDMI input will be output Digital When viewing the HDMI 1 input analog audio from the PC HDMI Audio input will be output Analog 61 Chapter 6 Using the TV s features Displaying TV status information To display TV status information using RECALL Press fea on the remote control The following information will display if applicable Current input ANT CABLE Video 1 etc elf ANT CABLE is the current input either CABLE for
76. Mode Description Both analog and digital channels can be Standard tuned normally Digital channels will have priority when manually entering a channel Auto number using the Channel Number 0 default 9 on the remote control analo channels can still be tuned by A if available Digital Only digital channels can be tuned To set the Channel Tuning Mode 1 From the SETUP menu highlight TV Settings and press amp 2 Press A or to highlight Channel Tuning Mode 3 Press dorP to select your desired mode and then press Ext Note The Channel Options window as well as the Channel Browser ANT CABLE List will be updated automatically when you change the mode Also the History List will be cleared but the Favorites List will be saved Tuning to the next programmed channel To tune to the next programmed channel Press 4 or on the remote control or TV control panel Note This feature will not work unless you program channels into the TV s channel memory ts page 37 44 Tuning to a specific channel programmed or unprogrammed Tuning analog channels Press the Channel Number 0 9 on the remote control For example to select channel 125 press 1 2 5 then Tuning digital channels Enter the major Channel Number 0 9 on the remote control followed by the dash Goo button and then the sub channel number For example to select digital channel 125 1
77. NC THINC THINC Top menu Top menu THINC THINC MENU GUIDE Guide Cable Guide SAT Guide RVD TV pvpive Guide O EAE up down up down apres SE own down down down down down downto Sime iiie Gharnelup Channel up Channelup Channel up Ghannelup Channel up own down ETD vD Exit Exit Exit DVD clear DVD clear Exit MUTE Mute Mute Mute Mute Mute Mute Mute INFO Guide Info Info Info Display Display Info RECALL TV Display TV Display TV Display TV Display TV Display TV Display TV Display 22 Chapter 3 Using the remote control REMOTE TV CABLE SAT DVD VCR PVR CONTROL SAT DVD VCR DVD Player VCR KEY To GENE satellite Orion Recorder Toshiba PVR GHRIN LastChannel LastChannel LastChannel DVDRTN DVDRTN TAUSE Pause Cable Pause SAT Pause Pause Pause Pause Pause PLAY Play Cable Play SAT Play Play Play Play Play STOP Stop Cable Stop SAT Stop Stop Stop Stop Stop Skip REW SKIP Dar M ese O ess SkipREW SkipREW oe Skip FWD SKIP Deed an E SkipFWD SkipFwD REW Rewind Seas d SAT Rewind Rewind Rewind Rewind Rewind FF FF Cable FF SAT FF FWD FWD FWD FWD C CAPTIO N TV C Caption TV SAT TV VCR TV VCR Reverse VCR REC REC menu Cable Record SAT Record Record o Record Re
78. Player MODE SELECT Optical audio output format PC connection ceccceeeeeeteeeeees Picture quality Picture size selection POWER button Power On Mode RECALL button REGZA LINK connection REGZA LINK feature ccceee 59 Remote control Battery installation 20 Device code table 26 Functional key chart 22 Programming 24 Reset Factory Defaults 40 ReSOIUtION ooo eeeeeeeeeeeeeeeeeeeeeeeee 63 RGB Range eeeeeeeeeeeneeee 61 S SAP Soundin 52 Satellite receiver connection 14 Sleep Timer ssassn 58 Static Gamma eeeeeceeeeeeeeeeereees 63 Stereo Sound ceeeeceeteeeteeeeeeeeeee 52 SurfLock M cee 45 SUIMOUNG aeee pna s ninaa ines 66 System status 40 T TheaterLock feature cccsceees 50 TheaterWide picture size 46 THINC menu ossee 1384 Time Zone 0 39 TOSHIBA Illumination 389 Transparency 40 TV status information ce 62 v V Chip bIOCKing cece 54 VCR Connection cccceeeee 13 14 Voice Enhancement 66 81 TOSHIBA AMERICA CONSUMER PRODUCTS L L C Corporate Headquarters 82 TOTOWA ROAD WAYNE NJ 07470 U S A NATIONAL SERVICE DIVISION 1420 B TOSHIBA DRIVE LEBANON TN 37087 U S A TOSHIBA OF CANADA LTD HEAD OFFICE 191 McNABB STREET MARKHAM ONTARIO L3R 8H2 CANADA TEL 905 470 5400 SERVICE CENTERS TORONTO 191 McNABB STREET MARKHAM ONTAR
79. REGZA LINK However Toshiba is not liable for those operations Refer to the individual instruction manuals for compatibility information 17 Chapter 2 Connecting your TV Connecting a digital audio system The TV s DIGITAL AUDIO OUT terminal outputs a Dolby Digital 28 or 2 channel down mixed PCM pulse code modulation signal for use with an external Dolby Digital decoder or other external audio system with optical audio input You will need optical audio cable Use an optical audio cable that has the larger TosLink connector and not the smaller mini optical connector Dolby Digital decoder or other digital audio system TV upper back panel DSTA AU To control the audio 1 Turnon the TV and the digital audio device 2 Press WE on the remote control to open the SETUP menu 3 Press A or W to select AV connection and press SETUP Menu Language English ANT CABLE In Auto Tuning Antenna Manual Tuning TV Settings Manual Setting AV Connection PC Settings Y 4 Press Aor W to select Digital Audio Output and then press lt or P to select either Auto or PCM ae Selecting the optical audio output format on page 53 AV Connection PC HDMI 1 Audio PC HDMI 1 Audio Auto HDMI Settings 18 Note e Some audio systems may not be compatible with Dolby Digital bitstream signals Older audio systems that are not compatible
80. RRANTY WHETHER MADE BY TCL TOSHIBA CORPORATION THEIR AFFILIATES ADRs AND ASPs AND WHETHER MADE ORALLY OR IN WRITING INCLUDING ANY STATEMENT IN ANY BROCHURE PRESS RELEASE ANNOUNCEMENT ADVERTISEMENT POINT OF SALE DISPLAY ETC YOU MUST READ AND FOLLOW ALL SET UP AND USAGE INSTRUCTIONS IN THE APPLICABLE USER GUIDES AND OR MANUALS IF YOU FAIL TO DO SO THIS TELEVISION MAY NOT FUNCTION PROPERLY AND YOU MAY SUFFER DAMAGE THIS WARRANTY WILL NOT COVER ANY SERVICE THAT IS REQUIRED IN PART OR IN WHOLE AS A RESULT OF ANY FAILURE TO FOLLOW THE SET UP AND USAGE INSTRUCTIONS THIS WARRANTY DOES NOT APPLY AND SHALL BE VOID AND UNENFORCEABLE IF THE TELEVISION IS OPENED SERVICED OR REPAIRED BY PERSONS OTHER THAN THOSE AUTHORIZED BY TCL TO SERVICE OR REPAIR THE TELEVISION IF THE TELEVISION FAILS TO WORK AS WARRANTED ABOVE YOUR SOLE AND EXCLUSIVE REMEDY SHALL BE REPAIR OR REPLACEMENT OF THE DEFECTIVE PART IN NO EVENT WILL TCL TOSHIBA CORPORATION THEIR AFFILIATES ADRs OR ASPs THE RELATED PARTIES BE LIABLE TO YOU OR ANY THIRD PARTY FOR ANY DAMAGES MONEY REIMBURSEME 4 COSTS OR EXPENSES THIS LIMITATION APPLIES TO AGES MONEY REIMBURSEMENT COSTS OR EXPENSE F ANY KIND WHATSOEVER INCLUDING ANY DIRECT OR DIRECT DAMAGES DAMAGE TO PROPERTY OR PERSON OST PROFITS LOST SAVINGS INCONVENIENCE OR OTHER PECIAL INCIDENTAL EXEMPLARY OR CONSEQUENTIAL AGES WHETHER FOR BREACH OF WARRANTY BREACH F CONTRACT
81. RVICE PERSONNEL The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance servicing instructions in the literature accompanying the appliance WARNING To prevent injury this apparatus must be securely attached to the floor wall in accordance with the installation instructions See item 23 on page 3 and instructions on page 5 WARNING If you decide to wall mount this television always use a UL Listed wall bracket appropriate for the size and weight of this television The use of any wall bracket other than a UL Listed wall bracket appropriate for the size and weight of this television for wall mounting this television could result in serious bodily injury and or property damage See Removing the Pedestal Stand ts page 5 NOTE TO CATV INSTALLERS This is a reminder to call the CATV system installer s attention to Article 820 40 of the U S NEC which provides guidelines for proper grounding and in particular specifies that the cable ground shall be connected to the grounding system of the building as close to the point of cable entry as practical For
82. SE 74 Acceptable signal formats for PC IN and HDMI terminals 4 75 PC IN signal formats 6 00 c eee eee 75 HDMI signal formats 0 0 e eee 76 Limited United States Warranty for LCD Televisions 26 and Larger 77 Limited Canadian Warranty for Toshiba Brand Flat Panel Televisions 78 INDEX sins E E EEE E EA A AET 81 Chapter 1 Introduction Features of your new TV The following are just a few of the many exciting features of your new Toshiba widescreen integrated HD LCD TV e Integrated digital tuning 8 VSB ATSC and QAM eliminates the need for a separate digital converter set top box in most cases 1080p output resolution e Four HDMI digital high definition multimedia interfaces with 1680p input support 1 page 16 e HDMI capabilities Deep Color feature allows the HDMI source to increase the available colors bits within the boundaries defined by the RGB or YCbCr color space Lip Sync feature activates an auto audio video dis ay timing adjustment function that allows HDMI source devices to accurately perform synchronization automatically HDMI INSTAPORT technology reduces the lag of switching time when switching HDMI sources RGB Range feature adjusts RGB full range signal automatically REGZA LINK allows control of external devices from the TV remote via HDMI connection t page 59 e Two sets of ColorStream HD high res
83. Sanyo Sharp Sylvania Symphonic Toshiba 21033 21070 21431 20675 21510 20741 Code 20869 21061 20695 20833 20869 20833 20869 20675 20675 20744 20715 20741 20833 20869 21044 21075 20741 20664 20867 21164 20741 20675 20695 21762 20675 21267 21061 20675 20522 20822 20820 21044 21075 20695 20670 20873 20630 20864 21033 21070 21431 20675 20675 20503 21854 20741 20869 31593 31593 30000 31593 31593 30060 30104 30848 30000 30593 31593 30000 31593 41788 VCRs Brand A Mark ABS Admiral Adventura Adyson Aiko Aiwa Akai Alba Alienware Allegro America Action American High Amstrad Asha Astra Audiovox Avis Beaumark Bell amp Howell Broksonic Calix Candle Canon Capehart Carrera Carver CCE Cineral Citizen Classic Colortyme Colt Craig Criterion Code 30037 30240 30000 30278 30046 31972 30060 30048 30039 30047 30104 30209 30020 30062 30479 30037 30240 30000 30072 30278 30037 30000 30124 30307 30041 30061 30106 30175 30209 30072 30278 31972 30039 30278 30035 30081 30000 30240 30035 30240 30037 30278 30038 30000 30072 30240 30035 30048 30039 30000 30104 30046 30479 30184 30121 30209 30002 30208 30479 31479 30037 30037 30038 30035 30002 30020 30062 30240 30035 30081 30072 30278 30278 30035 30037 30240 30000 30209 30278 30479 312
84. Streani He 8 DIGITAL AUDIO OUT Optical audio output in Two sets of ColorStream high definition Dolby Digital or PCM pulse code modulation component video inputs with standard stereo format for connecting an external Dolby Digital audio inputs for connecting devices with decoder amplifier or home theater system with component video output s such as a Toshiba DVD optical audio input P Clen ea 9 Service port For service use only Used for Note Component video cables carry only video information separate audio cables are required for a complete connection VIDEO 1 IN Standard composite video and standard audio inputs plus optional S video inputs for connecting devices with composite video or S video output Note Standard composite video and S video cables carry only video information separate audio cables are required for a complete connection Fixed Audio OUT Analog audio outputs for connecting an audio amplifier IR OUT For controlling infrared remote controlled devices through the TV You can connect up to two devices with an optical IR blaster cable ts page 12 and then control the devices using the TV s IR pass through features updating the television s firmware 10 ANT CABLE Input that supports analog NTSC and digital ATSC off air antenna signals and analog and digital Cable TV QAM signals HDMI the HDMI logo and High Definition Multimedia Interface are trademark
85. Sync and Interlace signals Format Resolution V Frequency H Frequency Pixel Clock Frequency VESA Standard DMT VGA 640 x 480 59 940Hz 31 469kHz 25 175MHz 72 809Hz 37 861kHz 31 500MHz 75 000Hz 37 500kHz 31 500MHz SVGA 800 x 600 56 250Hz 35 156kHz 36 000MHz 60 317Hz 37 879kHz 40 000MHz e 72 188Hz 48 077kHz 50 000MHz e 75 000Hz 46 875kHz 49 500MHz oO XGA 1024 x 768 60 004Hz 48 363kHz 65 000MHz o 70 069Hz 56 476kHz 75 000MHz 75 029Hz 60 023kHz 78 750MHz WXGA 1280 x 768 59 995Hz 47 396kHz 68 250MHz e 59 870Hz 47 776kHz 79 500MHz e 74 893Hz 60 289kHz 102 250MHz 1360 x 768 60 015Hz 47 712kHz 85 500MHz SXGA 1280 x 1024 60 020Hz 63 981kHz 108 000MHz e 75 025Hz 79 976kHz 135 000MHz 75 Chapter 9 Appendix HDMI signal formats Note e The HDMI inputs on this TV only accept VGA SVGA XGA WXGA and SXGA signal formats which are compliant with VESA as the table below Since some PCs and HDMI or DVI devices input signals which are different from the resolution and frequency described in the table below the following phenomenon may occur incorrect display false format detection picture position failure blur or judder In this case set the monitor output format on your PC HDMI or DVI device to conform to any signals in the table below e The signals whose vertical frequency are 24Hz 56Hz 70Hz 72Hz or 75Hz are converted to 60Hz signal e When you connect a P
86. TIVE PART WITH A NEW OR REFURBISHED PART WITHOUT CHARGE TO YOU c FOR TELEVISIONS 32 INCHES OR LESS YOU MUST DELIVER THE ENTIRE TELEVISION TO AN ASP YOU MUST PAY FOR ALL TRANSPORTATION AND INSURANCE CHARGES FOR THE TELEVISION TO AND FROM THE ASP d FOR TELEVISIONS OVER 32 INCHES During this period ASP personnel will come on site when warranty service is required Depending on the type of repair required the service will either be performed on site or the Television will be taken to an ASP for repair and returned at no cost to you ON SITE SERVICE ONLY APPLIES WITHIN 100 KILOMETERS OF AN ASP IF YOU ARE NOT WITHIN 100 KILOMETERS OF AN ASP YOU MUST DELIVER THE ENTIRE TELEVISION TO AN U 78 ASP YOU MUST PAY FOR ALL TRANSPORTATION AND INSURANCE CHARGES FOR THE TELEVISION TO AND FROM THE ASP Rental Units The warranty for Television rental units begins with the date of first rental or thirty 30 days from the date of shipment to the rental firm whichever comes first Your Responsibility THE ABOVE WARRANTIES ARE SUBJECT TO THE FOLLOWING CONDITIONS 1 You must provide your bill of sale or other proof of purchase 2 All warranty servicing of this Television must be performed by an ASP 3 The warranties from TCL are effective only if the Television is i purchased as new and unopened from TCL or from TCL s authorized distributors dealers or resellers ADR s and
87. XIT Auto this mode outputs Dolby Digital or PCM to the digital audio output socket providing it is being broadcast PCM this mode outputs PCM format to the digital audio output socket Note Auto mode outputs PCM only while playing DivX files Using the Dolby Digital Dynamic Range Control feature This dynamic range control feature causes the ATSC dynamic range to be further compressed allowing you to switch from digital to analog broadcasts at the same dynamic range 1 From the SOUND menu highlight Dynamic Range Control 2 Press or P to select On Note e This feature is only available on Digital Channels e This feature is not available when Dolby Volume is set to Low or High e This feature will function in relation to the Optical Output Format PCM mode Using Dolby Volume This feature provides a consistent sound volume regardless of programs channels or input sources 1 From the SOUND menu highlight the Dolby Volume 2 Press orP to select Low High or Off Note e If Dynamic Range Control is set to On this feature will be grayed out e This feature is not effective for the audio signal output from DIGITAL AUDIO OUT and FIXED AUDIO terminal Setting the PIN code A PIN code is necessary for some menus Registering a new PIN code 1 From the PREFERENCES menu highlight PIN Setting and press A new screen will display 2 Press number buttons to enter a
88. a and it is featured in many high end home theater products Audyssey EQ is used in the TV tuning process to calculate an equalization solution that corrects time and frequency response problems in TV systems This results in clear rich sound with more intelligible dialog e Manufactured under license from Audyssey Laboratories U S and foreign patents pending Audyssey EQ is a registered trademark of Audyssey Laboratories e HDMI the HDMI logo and High Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC e INSTAPORT and INSTAPORT logo are trademarks of Silicon Image Inc in the United States and other countries e DivX is a registered trademark of DivX Inc and is used under license Contents Important Safety Instructions 3 Installation Care and Service 3 Choosing a location for your LCD TV 5 Chapter 1 Introduction 2 0 00 e ee eaee 9 Features of your new TV 6 6 cece cece 9 Overview of steps for installing setting up and using your new TV 06 cece eee 9 TV front and side panel controls and connections 10 TV back panel connections 0 00sec seen 11 Chapter 2 Connecting your TV 12 Overview of cable types 00 6 6 cece cece nee 12 About the connection illustrations 12 Connecting a VCR or a VCR with S video and antenna Cabl
89. advanced picture settings features 63 Using Resolution 3 05 iyiki me sete e erens 63 Using DynaLlight 6 4 2susiawins wesy eens ee 63 Using Dynamic Contrast 6 e eee eee 63 Using the Static Gamma feature 63 Using the Film Stabilization feature 63 Using Expert Mode 00 6 c eee e eee eens 64 Using ClearScan 240 feature 05 64 Using MPEG NR areren het fae Pda nate oa 64 Using DNR saws feria ee pe Gh eteatunw es 64 Using the Auto Brightness Sensor 65 Using the Backlight Adjustment Pro 65 Using the ColorMaster feature 65 Using the Base Color Adjustment 65 Selecting the color temperature 66 Using the advanced sound settings features 66 Using the surround sound feature 66 Using the Media Player 0 0 0 0 seca 67 Media Player Specifications 64 67 Basic operation 6 0 c cece eee eee eens 67 Playing DivX files only for USB devices 68 Playing MP3 files only for USB devices 69 Viewing JPEG files je psc ashen cigs Cismi ts ta ami 70 Chapter 8 Troubleshooting 00000 71 General troubleshooting a s sussa sarrere 71 LED indications sisas s nei a E E pa a nees 73 Chapter 9 Appendix 0 0 00 c eee e eae 74 Specifications s sue secre na eg oe ea vad ES E
90. ansparency You can set the transparency of the on screen display system 1 From the PREFERENCES menu highlight Transparency 2 Press orP to select Low Middle High or Off and press Exr 40 1 From the SETUP menu highlight System Information 2 Press to display the system information System Information ZV650U 1 1 32 0 Feb 25 2009 01 06 35 FW 17 Reset Factory Defaults You can reset all settings and channels to their factory default values 1 From the SETUP menu highlight Reset TV and press amp 2 Enter your PIN code if PIN code has been set 3 To cancel the reset Press lt 4 or P to select No and press amp Chapter 6 Using the TV s features Selecting the video input source to view To select the video input source to view 1 Press on the remote control or TV control panel 2 And then either a Press 0 9 or b Repeatedly press A or W on the remote control and then press to change the input or c C ea press u on the remote control or TV control panel to change the input Inputs ANT CABLE O Video 1 Video 2 ColorStream HD1 ColorStream HD2 HDMI 1 GEOG Q HDMI 2 HDMI 3 HDMI 4 Pc Note e You can label the video input sources according to the specific devices you have connected to the TV Labeling input sources on page 38 e Sources can also be skipped t Setting video in
91. ature You can lock the control panel to prevent your settings from being changed accidentally by children for example en Panel Lock is On none of the controls on the TV control panel will operate except POWER 1 From the PREFERENCES menu highlight Parental Control and Locks and press 2 Enter your four digit PIN code 3 Press A or W to select Panel Lock and then press lt or P to select On When Panel Lock is set to On a reminder will appear when the buttons on the TV control panel are pressed If the POWER button is pressed the TV will switch off and can only be brought out of standby by using the remote control To unlock the control panel Select Off in step 3 above Chapter 6 Using the TV s features Using the PC settings feature Setting the PC Audio You can view an image from a PC on the TV screen When a PC is connected to the TV s PC IN terminal you can use the PC Settings feature to make adjustments to the image If the edges of the picture are cut off readjust the Horizontal Position and Vertical Position If the icture is affected by interference readjust the Clock hase and Sampling Clock 1 Select PC input mode i Selecting the video input source to view on page 41 2 From the SETUP menu highlight PC Settings and press Note If a PC is not connected or there is no PC input signal this feature will be grayed out Press A or W to highlight the item you want to ad
92. ature to Stereo mode ce page 52 e If you connect a PC using either the PC IN terminal or an HDMI terminal make sure that the PC Audio setting is properly set ns page 57 Remote control problems e Make sure the remote control is set to the correct device mode cs page 22 e Remove all obstructions between the remote control and the e The remote control batteries may be dead Replace the batteries r page 20 e Your TV remote control may not operate certain features on your external device Refer to the owner s manual for your other device to determine its available features If your TV remote control does not operate a specific feature on another device use the remote control that came with the device t pages 26 33 e f the TV still does not act as expected use the Reset Factory Defaults procedure ns page 40 Channel tuning problems e Make sure the remote control is set to the correct device mode cs page 22 e The channel may have been erased from the channel memory by the Auto Tuning feature Add the channel to the channel memory ss page 37 e The channel may be blocked by the Lock feature Unblock the channel ns page 55 continued 71 Chapter 8 Troubleshooting e If you are unable to tune digital channels check the antenna configuration ts page 37 If you are still unable to tune digital channels clear all channels from the channel list and reprogram channels into the channel memory t page
93. cable TV or ANT for over the air broadcasts e Channel number if in ANT CABLE mode e Input label if set e Digital signal strength indicator bar graph in lower right corner of box for ATSC signal only eStereo Mono or SAP audio status when HDMI input mode Dolby Digital or PCM e Video resolution e Aspect ratio of incoming video signal 4 3 or 16 9 V Chip rating status GameTimer if set CD Stereo 4801 3 To close the RECALL screen Press feu again To display TV status information using INFO only available for ANT CABLE input Press nro on the remote control The following additional information will display for off air digital channels if applicable e Title e Duration e Detailed description To display Next information press nro on the remote control again Pressing nro a third time will remove the entire banner M ANT CD Stereo 480i 3 NONE ae i sll Nashville WX Channel provides Middle Tenessee and Southern Kentucky Note The location of the banner can be moved to the top or bottom of the screen by pressing A or W while the RECALL or INFO display is on screen The last position will be stored to memory 62 Understanding the auto power off feature The TV will automatically turn itself off after ey 15 minutes if it is tuned to a vacant channel or a station that completes its broadcast for the day This feature functions
94. chase to the TACP Authorized Service Station For additional information visit TACP s website www tacp toshiba com ALL WARRANTIES IMPLIED BY THE LAW OF ANY STATE OF THE U S A INCLUDING THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY LIMITED TO THE DURATION OF THE LIMITED WARRANTIES SET FORTH ABOVE WITH THE EXCEPTION OF ANY WARRANTIES IMPLIED BY THE LAW OF ANY STATE OF THE U S A AS HEREBY LIMITED THE FOREGOING WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES GUARANTEES AGREEMENTS AND SIMILAR OBLIGATIONS OF TACP WITH RESPECT TO THE REPAIR OR REPLACEMENT OF ANY PARTS IN NO EVENT SHALL TACP BE LIABLE FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES INCLUDING BUT NOT LIMITED TO LOST PROFITS BUSINESS INTERRUPTION OR MODIFICATION OR ERASURE OF RECORDED DATA CAUSED BY USE MISUSE OR INABILITY TO USE THIS LCD TELEVISION No person agent distributor dealer or company is authorized to change modify or extend the terms of these warranties in any manner whatsoever The time within which an action must be commenced to enforce any obligation of TACP arising under the warranty or under any statute or law of the United States or any state thereof is hereby limited to ninety 90 days from the date you discover or should have discovered the defect This limitation does not apply to implied warranties arising under the law of any state of the U S A THIS WARRANTY GIVES YOU SPECIFI
95. connecting a PC to the TV s PC IN terminal ts page 19 Note Separate audio cables are required for a complete connection About the connection illustrations You can connect different types and brands of devices to your TV in several different configurations The connection illustrations in this manual are representative of typical device connections only The input output terminals on your devices may differ from those illustrated herein For details on connecting and using your specific devices refer to each device s owner s manual Chapter 2 Connecting your TV Connecting a VCR or a VCR with S video and antenna Cable TV or Camcorder Camcorder TV upper back panel rin N N PCIN ashy Spet BST 00 VIDEO AUDIO OUT DN on TV right side panel G TV lower back panel ON Ea ANT CABLE You will need e coaxial cables estandard A V cables For better picture performance if your VCR has S video use an S video cable plus the audio cables instead of the standard video cable For better picture performance if your camcorder has S video connect an S video cable plus the audio cables to VIDEO 1 on the TV back instead of the VIDEO 2 on the TV right side panel If you have a mono VCR connect LIMONO on the TV to your VCR s audio out terminal using the white audio cable only S video cable if your VCR or camcorder has S vide
96. cord Single click Double click Double click Double click click 2 Double click Double click STOW Slow Dir Slow FWD Slow FWD Slow FWD Slow FWD PIC MODE TV Picture TV Picture TV Picture TV Picture TV Picture TV Picture TV Picture mode mode mode mode mode mode mode FREEZE TV Freeze TV Freeze TV Freeze TV Freeze TV Freeze TV Freeze TV Freeze PIC SIZE TV Picture TV Picture TV Picture TV Picture TV Picture TV Picture TV Picture size size size size size size size DISC AM FM Sa DVD VCR Replay Note e key does not send a signal in that remote control mode Volume will affect the TV by default When the volume is unlocked all the devices will have their own volume if their ID has volume data See Using the volume lock feature 8000 ts page 25 2DVD REC is only for DVD Recorder no function is picked for DVD Player 23 Chapter 3 Using the remote control Using the remote control to operate your other devices Programming the remote control t o operate your other devices Your TV remote control has one dedicated TV mode and three programmable multi brand modes CABLE SAT DVD and VCR PVR The default device modes and programmable device modes are listed below Note The TV remote control is preprogrammed to operate most Toshiba devices To operate a non Toshiba device or a Toshiba device that the remo
97. cture may be hidden TheaterWide 1 for 4 3 format programs PEs OOO OOO The center of the picture remains close to its original proportion but the left and right edges are stretched wider to fill the screen TheaterWide 2 for letter box programs EE ESS QOG GG The top and bottom edges of the picture may be hidden TheaterWide 3 for letter box programs with subtitles The top and bottom edges are hidden Normal for VGA SVGA XGA WXGA and SXGA sources only Normal is a non stretched display Some input signal formats will display with sidebars and or bars at the top and bottom Dot by Dot for VGA SVGA XGA WXGA and SXGA sources only Dot by Dot is a non scaling display Depending on the input signal format the picture is displayed with sidebars and or bars at the top and bottom Example VGA input source To view the hidden areas such as subtitles or captions see Scrolling the Picture ss page 48 47 Chapter 6 Using the TV s features Scrolling the picture Using the 4 3 Stretch If the edges of the picture are cut off you can adjust the position image Note You can adjust the picture position when the picture size is set to TheaterWide 2 or TheaterWide 3 1 From the SETUP menu highlight Picture Position 2 Press A or to select Vertical Position 3 Press or gt to make the appropriate adjustments The ad
98. d press Pay to test the code e If the device responds to the remote control you have entered the correct code e If the device does not respond to the remote es repeat steps 3 and 4 using another code Note After programming the remote control make sure all necessary keys on the TV remote control in addition tos operate your device If some keys are not operational repeat the device code setup using another code if other codes are listed for your device If after trying all listed codes the necessary keys do not operate your device use the device s original remote control 5 To control the TV press TV Note Every time you change the batteries you will need to reprogram the remote control Some newer VCRs respond to either of two codes These VCRs have a switch labeled VCR1 VCR2 If your VCR has this kind of switch and does not respond to the codes for your VCR brand set the switch to the other position VCR1 or VCR2 and reprogram the remote control Chapter 3 Using the remote control Searching and sampling the code of a device 8500 If you do not know the device code for a particular device you can cycle the remote control through the available codes for that device mode and sample the functions to find the code that operates the target device The keys available to be sampled provided they are applicable to that mode are 1 hy Ai and 5 Invalid keys will be ignored while i
99. deo according to the level of darkness 1 From the PICTURE menu hi hlight Advanced Picture Settings and press 2 Press A or W to select DynaLight 3 Press dor P to select On or Off and press Ex Using Dynamic Contrast Dynamic Contrast detects changes in the picture quality that affect the appearance of your contrast settings and then automatically adjust the video 1 From the PICTURE menu hi hlight Advanced Picture Settings and press ea 2 Press Aor W to select Dynamic Contrast 3 Press dor to adjust the level and then press The adjustment range is from 0 to 10 Note If the Picture Mode is set to AutoView the level range is from 5 to 5 Using the Static Gamma feature The static ae feature allows you to adjust the levels of black in the picture To adjust the static gamma settings 1 From the PICTURE menu hi hlight Advanced Picture Settings and press eS 2 Press Aor W to select Static Gamma 3 Press or P to adjust the level and press The adjustment range is within 15 from center e If the setting is moved in the minus direction the detail of black colors will be decreased e If the setting is moved in the plus direction the detail of black colors will be increased Using the Film Stabilization feature This feature helps to eliminate the video shaking 1 From the PICTURE menu hi hlight Advanced Picture Settings and press 2 Press A or W to select Film Stabilization 3 Press
100. e 34 THING menu setae eats ota eed aren i 34 Navigating the menu system 0005 35 Chapter 5 Setting up yourTV 00 36 Initial Setups vieme ieo See a hee Seed ad See 36 Quick Setup from the SETUP menu 36 Selecting the menu language 00055 36 Configuring the antenna input source for the ANT CABLE terminal 000 37 Programming channels into the TV s channel memory 0 0606 c eee eens 37 Auto TUNNE ina erect ewes h bed WH aS 37 Manual Tuning es cots kom cae siete nt Gane gta 37 Setting channel skip 00 6 c eee c eee eee 38 Setting video input skip 0 00 c eee 38 Labeling input sources 6 00 c eee eee eee 38 Setting the Auto Input feature 04 39 Setting the time zone 2 6 6 6 ee cece eee eee 39 Selecting the location arei coaie ouaaa e aa a 39 Selecting the TOSHIBA Illumination mode 39 Selecting the Power On Mode 0005 Using Bl e Screens tirei te Churana genie SSS En Setting the screen transparency 0 0055 Viewing the system status 0 0 eee eee Reset Factory Defaults 0 0 eee e cece Chapter 6 Using the TV s features Selecting the video input source to view Tuning channels nares 2c iden ended base bag oes Tuning channels using the Channel Browser Setting the Channel Tuning Mode
101. e TV or Camcorder 13 Connecting a DVD player with ColorStream component video a VCR and a satellite receiver Jy aacneaace tis ede eens 14 Connecting a device to the IR OUT infrared terminal using the IR blaster cable for IR pass through device control so bans a cee kaa gee atthe 15 Connecting an HDMI or DVI device to the HDMULinputs 2 eeu std betas atten S a a 16 REGZA LINK connection 0 00sec ences 17 Connecting a digital audio system 18 Connecting an audio system 0 0 0000 18 Connecting a personal computer PC 19 Chapter 3 Using the remote control 20 Preparing the remote control for use 20 Installing the remote control batteries 20 Learning about the remote control 21 Remote Control functional key chart 22 Using the remote control to operate your other devices 66 i cece cence ro 24 Programming the remote control to operate your other devices nai serte Trnky cece cece eee ee 24 Device code setup 6 60 c cece cence eens 24 Searching and sampling the code of a device 8500 6 cece eee ee eee 25 Using the volume lock feature 8000 25 Operational feature reset 8900 25 Multi brand remote control device codes 26 Chapter 4 Menu layout and navigation 34 Main menu layout 6 c cece ee
102. e TV speakers or the amplifier When this item is set to Speaker Ampli ler the remote control can be used DP f to adjust or mute the volume of the audio reference This item will be grayed out unless a REGZA LINK compatible audio receiver is connected and set to TV speakers automatically Note When you turn on the amplifier change its input source or adjust the sound volume the sound will be output from the amplifier s speakers even if TV Speakers has been selected Turn the TV off and on again to output the sound from the TV speakers To set the REGZA LINK Setup 1 From the PREFERENCES menu highlight REGZA LINK Setup and press amp 2 Press A or to highlight Enable REGZA LINK 3 Press dor P to select On Note If you set Enable REGZA LINK to Off the other items under REGZA LINK Setup will be grayed out 4 Press Aor W to highlight the REGZA LINK setup item you want to use and press or P to select On or desired mode e TV Auto Power On Off e Auto Standby On Off e Amplifier Control On Off e Speaker Preference TV Speakers Amplifier REGZA LINK PC Link This feature automatically sets suitable widescreen formats and picture preferences when the TV is connected to a REGZA LINK PC Note This feature depends on the type of equipment connected Chapter 6 Using the TV s features Using the HDMI settings feature Setting the HDMI audio mode This menu consists of the following items
103. e channel number up to three digit number and press If channels are found they will be listed at the bottom of the screen Analog channels will be noted by an ATV symbol digital channels by a DTV symbol 37 Chapter 5 Setting up your TV Setting channel skip Setting video input skip To prevent certain channels from being viewed channel positions can be skipped 1 From the SETUP menu highlight TV Settings and press 2 Press A or W to select Channel Options and press The list of channels will appear Channel Options Ch Type 5 1 om Drv fw ew Ew 3 Press A or Y to select a channel position to be skipped and press A tick will appear in the box To remove the tick press again Note Skipped channels cannot be selected with 4 or however they can still be accessed using the Channel Number on the remote control 38 If you set a video input source to be skipped it will be skipped over when selecting the input by repeatedly pressing u To turn on the skip 1 Tune to the video input source to be skipped 2 From the SETUP menu highlight Manual Setting and press The setting window will appear 3 Press A or Y to select skip and press Ex Manual Setting Skip On Video2 KV CR To turn off the skip 1 Select the video input that is set to skip by direct number entry or by using the A or W and then press ie 2 From
104. e in Step 2 below e Depending on the file size it takes some time to start content HEE Movie gt B Folder select Folder or File STOP 2 Press 8 to stop playback STOP 3 Ifplayback finishes before amp 5 is pressed the next file will start playing automatically To pause playback PAUSE STEP Press during playback To resume normal playback press amp To play in fast reverse or fast forward directions Press 3 or during playback Each time you press RE FF la the GS or the plead speed will change Ga Fast reverse playback e amp Fast forward playback To locate a specific content SKIP SKIP Press or sy repeatedly to access the desired content e Playback starts from the beginning of the current content When you press twice quickly playback starts from the beginning of the preceding content e To locate subsequent content Note If the previous or next file is not compatible it will be skipped automatically To select a language 1 Press during playback 2 Press A or to select Subtitle or Audio 3 Press or P to select your preferred language To set the repeat mode 1 Press m 2 The current repeat setting will appear Press or gt to select Off All or 1 Press Five or m The setting is effective until the TV is turned off To display the file status information 1 Press fa during playback The following information will Ee di
105. e is not compatible it will be skipped automatically 3 Press to return to Single View mode 70 To set the Slide Show mode settings 1 Press Fim during Slide Show mode 2 Press Aor Y to highlight the item Interval Time or Repeat 3 Press or P to adjust the setting 4 Press or to return to Slide Show Item Description To set a time interval to view photos at your preferred intervals 3sec 5sec 10sec 15sec 30sec 60sec or 90sec Interval Time To display photos in the same directory Repeat repeatedly On Off To rotate the image During viewing the image in the Single View mode press A to rotate the image 90 degrees clockwise press W to rotate the image 90 degrees counterclockwise To return to the thumbnail Press m during Single View mode or Slide Show mode To display file status information d Press ful The following information will be displayed on the bottom of the screen e Content number Total number only for the contents stored in the same directory e Photo title e Date and time taken e File size e Slide Show icon if applicable e Repeat play icon if applicable e Operation guide 2 Press f again to make the information disappear off screen Note The file status information will disappear after about 6 seconds Compatibility files Data compatibility JPEG Exif ver 2 2 File format DCF ver 1 1 Maximum viewable resolution 16
106. ecting your TV Connecting a DVD player with ColorStream component video a VCR and a satellite receiver Your TV has two sets of ColorStream component video inputs From antenna bb COMPONENT VIDEO S VIDEO VIDEO OUT DVD player with component video From satellite dish Sato COMPONENT VIDEO evoe ae ANT CABLE Satellite receiver with component video TV lower back panel You will need To view the DVD player e coaxial cables Turn ON the DVD player Select the ColorStream estandard A V cables HD1 video input source on the TV For better picture performance if your VCR has S video use an S video cable plus the audio cables instead of the standard video cable Do not connect both types of video cable to VIDEO 1 at the same time or the picture performance will be unacceptable If you have a mono VCR connect LIMONO on the TV To view the VCR or view and record antenna to your VCR s audio out terminal using the white audio channels To view satellite programs using the component video connections Turn on the satellite receiver Select the ColorStream HD2 video input source on the TV cable only Turn ON the VCR Tune the VCR to the channel you estandard audio cables want to watch Select the VIDEO 1 video input e component video cables source on the TV You can connect the component video cables plus P audio cables from the DVD playe
107. el Browser Previously tuned channels inputs are shifted to the left eventually moving off the left side Press 4 to surf backward through the previously tuned channels inputs Any channel or input that is tuned repeatedly will not be repeated in the History List but instead will be moved to the end of the list on the right side of the Channel Browser The Channel Browser will store the following channels e All channels that are tuned using the numeric buttons on the remote control e All channels that are tuned for at least 5 seconds using 4 or on the remote control Note Whenever an item is selected that cannot be tuned for various reasons the TV will automatically tune to the previously viewed channel or input Clearing channels from the History List e Reconfiguring the ANT CABLE input will clear the History List Note See page 37 for details on configuring the antenna input Once 32 channels or inputs are stored in the History List the oldest item will be removed from the list when a new channel or input is tuned e Turning off the TV will clear the History List 43 Chapter 6 Using the TV s features Setting the Channel Tuning Mode This feature allows you to choose how tuning will be handled for analog and digital channels when the TV is in Antenna mode Note To use this feature the ANT CABLE In must be set to Antenna t page 37 The channel tuning mode has three options
108. ems press A or VW on the remote control or TV control panel to move up and down through them and press amp e Press or P to adjust settings e All menus close automatically if you do not make a selection within 60 seconds e To close a menu instantly press Ma or Ext 35 Chapter 5 Setting up your TV Initial Setup When you first turn on or reset the TV the Initial Setup window will appear 1 2 In the Menu Language field press lt or to select your preferred language Press A or W to select Time Zone and set your desired time zone with lt or and press Next the Location setting window will appear For normal home use press 4 or P to select Home and press s Location To use the TV for displaying in a store showroom please select Store Home mode is recommended for normal use ENERGY STAR qualified If Store is selected in step 3 the Auto Demo setting window will appear Auto Demo To use the demo please select On For normal TV usage please select Off lt On For normal TV usage select Off To enable the on screen demonstration select On Note The on screen demonstration will automatically restart after 120 seconds of inactivity To change the demo setting To change the Auto Demo Selection setting ress and hold Mew on the remote control or TV or 2 seconds while watching TV When the setting window opper continue to press MEW to cycle
109. er or knocked down e Care should be taken to route all cords and cables connected to the flat panel display so that they cannot be pulled or grabbed by curious children Wall Mounting If you decide to wall mount your flat panel display always e Use a mount that has been recommended by the display manufacturer and or listed by an independent laboratory such as UL CSA ETL e Follow all instructions supplied by the display and wall mount manufacturers e If you have any doubts about your ability to safely install your flat panel display contact your retailer about professional installation e Make sure that the wall where you are mounting the display is appropriate Some wall mounts are not designed to be mounted to walls with steel studs or old cinder block construction If you are unsure contact a professional installer e A minimum of two people are required for installation Flat panel NK displays can be heavy i CEA Consumer Electronics Association www CE org safety Important Safety Instructions 1 Read these instructions 2 Keep these instructions 3 Heed all warnings 4 Follow all instructions 5 Do not use this apparatus near water Q Clean only with dry cloth 7 Do not block any ventilation openings Install in accordance with the manufacturer s instructions 8 Do not install near any heat sources such as radiators heat registers stoves or other apparatus including
110. face source device This input is designed to accept HDCP High Bandwidth Digital Content Protection program material in digital form from EIA CEA 861 E compliant consumer electronic devices such as a set top box or DVD player with HDMI or DVI output The HDMI input can accept and display VGA SVGA XGA WXGA SXGA 480i 60Hz 480 60Hz 720p 60Hz 1080i 60Hz and 1080p 24Hz 60Hz signal formats For detailed signal specifications see page 76 Supported Audio format Linear PCM sampling rate 32 44 1 48 kHz Note e To connect a PC to the HDMI input see page 19 e Some legacy HDMI sources may not work properly with your HDMI TV due to the adoption of new standards Please try setting the following three options Deep Color Lip Sync INSTAPORT and RGB Range to Off Your legacy HDMI source should operate properly with your TV See page 75 To connect an HDMI device you will need one HDMI cable per HDMI device For proper operation it is recommended that you use an HDMI cable with the HDMI Logo MiMi To display an 1080p 60HZ signal format you will need a High Speed HDMI cable Conventional HDMI DVI cable may not work properly HDMI cable transfers both video and audio Separate analog audio cables are not required see illustration See Setting the HDMI audio mode t page 61 TV upper back panel TV right side panel HDMIIN Hom 1 2 3 l I O G2 vn
111. g will appear in the RECALL screen TV PG LV Unlocking programs If you try to tune the TV to a program that exceeds the rating limits you set the TV will enter program lock mode and a warning message will appear on screen You can either unlock the program or tune to an unlocked program to ak 55 Chapter 6 Using the TV s features Locking channels With the Lock feature you can lock specific channels The locked channels can only be accessed by entering the PIN 1 From the SETUP menu highlight TV Settings and press amp 2 Press A or W to select Channel Options and press The list of channels will appear Channel Options Ch Type 5 1 au gt a a nn E EE EE E E EE EE E Hy Press gt and then A or to select a channel in the lock column PIN code entry will be required to set locked channel Note If the PIN code has not been set yet a warning message will appear 5 A tick will oppen in the box To remove the tick press e again Using the input lock feature You can use the Input Lock feature to lock the video inputs Video 1 Video 2 ColorStream HD1 ColorStream HD2 HDMI 1 HDMI 2 HDMI 3 HDMI 4 and PC and channels 3 and 4 You will not be able to view the input sources or channels until you unlock the inputs 1 From the PREFERENCES menu highlight Parental Control and Locks and press amp 2 Enter your four digit PIN code 3 Press A or W
112. ght Edit Rating Limits and press re The Edit Rating Limits screen appears Press A V 4or gt and then press amp to select the level of blocking you prefer A box with an X is a rating that will be blocked As you highlight a rating a definition for the rating appears at the bottom of the screen ak OND 54 Downloading an additional rating system for blocking TV programs and movies In the future an additional Pee system may become available for use in selectively blocking programs Note The currently tuned station must be receiving a digital signal before an additional rating system can be downloaded To download the additional rating system if available 1 From the PREFERENCES menu highlight Parental Control and Locks and press Enter your four digit PIN code Parental Control and Locks window is displayed Press A or to highlight Enable Rating Blocking Press lt or P to select On Press to highlight Edit Rating Limits and press amp The Edit Rating Limits screen appears Highlight Alt RS and press The Edit Alternate Ratings screen will appear Note e The Alt RS button will only be available if an additional rating system is currently available e It may take several minutes for the TV to download the additional rating system e The information displayed in the Alternate Ratings screen will depend on the configuration of the additional rating system avai
113. he pedestal stand 3 Once you have removed all four screws holding the pedestal stand in place remove the pedestal stand from the TV by sliding the pedestal stand away from the TV Four screws FCC Declaration of Conformity Compliance Statement Part 15 The Toshiba 42ZV650U 47ZV650U and 55ZV650U Televisions comply with Part 15 of the FCC rules Operation is subject to the following two conditions 1 this device may not cause harmful interference and 2 this device must accept any interference received including interference that may cause undesired operation The party responsible for compliance to these rules is Toshiba America Consumer Products L L C 82 Totowa Rd Wayne NJ 07470 Ph 1 800 631 3811 Note This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC rules These limits are designed to provide reasonable protection against harmful interference in a residential installation This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions may cause harmful interference to radio communications However there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception which can be determined by removing and applying
114. ices If you try to play DivX VOD content not authorized for your device the message Authorization Error will be displayed and your content will not play Learn more at www divx com vod Playing MP3 files only for USB devices Basic Playback PLAY 1 After selecting a file page 67 press or 38 to begin playback J Music gt ll Folder select Folder or File Note e The Media Player memorizes the location where playback is stopped The content resumes playback from the location where playback was stopped when you press PLAY next time To start playback from the beginning regardless of the location where playback was stopped press e Depending on the file size it takes some time to start content STOP 2 Press 5 to stop playback If playback finishes before Ga is pressed the next file will start playing automatically To pause playback PAUSE STEP Press during playback To resume normal playback press 55 To play in fast reverse or fast forward directions Press 3 or during lies Each time you press the amp or the playback speed will change e o Fast reverse playback e amp Fast forward playback To locate a specific content SKIP SKIP Press or repeatedly to access the desired content e amp Playback starts from the beginning of the current file e When you press twice quickly playback starts from the beginning of the preceding file e 5 To l
115. in ANT CABLE mode only Understanding the last mode memory feature If the power is cut off while you are viewing the TV the Last Mode Memory feature automatically turns on the TV when the power is resupplied Note lf it is possible that you will be away from the TV for an extended period of time you should unplug the power cord Chapter 7 Using the TV s advanced features Using the advanced picture settings features Note Some of the Advanced Picture Settings features will not be available for adjustment when the Picture Mode is set to AutoView Using Resolution The Resolution feature allows you to adjust the levels for your desired picture settings To set Resolution 1 From the PICTURE menu hi hlight Advanced Picture Settings and press gs Aor Y to highlight Resolution and press Press lt or P to select On Press A or W to highlight the Level and then press or P to select either 1 2 3 4 or 5 and press Note e If the Picture Mode is set to AutoView the level range is from 2 to 2 e If the Picture Mode is set to Game or PC this feature will be grayed out e This feature may not work properly depending on the content e Noise may appear on the image depending on the device connected to the TV e g a device with specific enhancer function AO N Using DynaLight The DynaLight feature automatically strengthens the black co oop of dark areas in the vi
116. ional key chart t pages 22 23 1 POWER SLEEP I 3 iea MODE SELECT ooo DOD DOO Gin CO a Ne Ul aA AN BROWSER Nh ie Sy Dpr u m CH 14 fem y i MUTE inro recat Ep 18 PAUSEISTEP PLAY STOP 19 SKIP REW FF SKIP A NOG I TVNCR REC SLOW oe QE AM FM i cwone Freeze pic size _ 4 23 TOSHIBA CT 90276 Note The error message Not Available may appear if you press a key for a function that is not available 1 SLEEP accesses the sleep timer t page 58 2 POWER turns the TV on and off When the TV is on the green LED indicator on the TV front will be illuminated 3 MODE SELECT sets the four remote control device modes TV CABLE SAT DVD and VCR PVR Press TV until the keypad blinks 3 times to control the TV The selected MODE key blinks each time any key is pressed When the Auto Input feature is set these keys can also be used to change inputs on the TV t page 39 4 Channel Numbers 0 9 100 directly tune channels The Goo button is used to enter two part channel numbers 1s page e 44 or to edit the Favorites List is page 4 5 INPUT selects the video input source ts page 41 6 FAV BROWSER accesses the Favorites List in the Channel Browser i page 42 7 MENU accesses the main TV menu system pages 34 and 35 8 ENTER activates highlighted
117. is only available for viewing JPEG files e Do not insert remove USB device and SD memory card during using MEN is not available during playback Media Player Specifications Device USB device USB Mass Storage Class devices MSC Note e Connectivity is not guaranteed for all devices e Connect the USB device to the TV directly e Do not use a USB hub SD memory card SD memory card up to 2GB SD High Capacity Card SDHC 4 32GB Note Do not use any SD memory cards other than those specified Supported file system FAT12 FAT16 and FAT32 You must obtain any required permission from copyright owners to download or use copyrighted content Toshiba cannot and does not grant such permission Basic operation Auto start 1 From the APPLICATIONS menu highlight Media Player and press Press A or W to highlight Auto Start Press lt or P to select On Insert USB device into the USB terminal or SD memory card into the SD card slot on the right side of the TV Press A or W to select Photo Movie Music and press amp The thumbnail view for Photo or list of files for Movie and Music will appear AON oa 6 Press A or W to select USB device or SD memory card if the selection window is displayed 7 A confirmation message will appear Highlight Yes and then press a Note If the Auto Start is set to Off you can start the Media Player manually Manual Start 1 Insert USB device
118. just Press or gt to make an appropriate adjustments Note The screen is disrupted momentarily when adjusting the PC settings This is not a sign of malfunction Mode Description Moves the picture left right p orizontal The adjustment range is within 10 osition f 7 rom center Moves the picture up down Vertical The adjustment range is within 10 osition f 7 rom center Helps to reduce noise and sharpen the picture Cl ck Phase The adjustment range is within 32 from center Helps to reduce noise and minimize sampling periodic vertical stripes on the screen Cloc The adjustment range is within 5 from center The default settings and or adjustment range vary depending on the input signal format This function allows you to output or mute the sound from your PC when connecting using the PC IN terminal and an analog RGB cable 1 From the SETUP menu highlight AV Connection and press 2 Press A or W to select PC HDMI 1 Audio 3 Press orP to select PC Note Setting PC HDMI 1 to PC will force HDMI 1 Audio to Digital mode 57 Chapter 6 Using the TV s features Setting the On Timer Setting the Sleep Timer You can set the on timer to automatically turn on the TV to a preset channel or input at a preset time To activate the On Timer 1 From the APPLICATIONS menu highlight On Timer and press r 2 Press A or W to select Enable On Timer and then press lt
119. justment range is from 5 to 10 Note This feature is not available on digital channels Using the Auto Aspect Ratio feature When the auto aspect ratio feature is set to On the TV will automatically select the picture size when one of the following input sources is received e A 480i 480p 720p 1080i digital signal from the ANT CABLE input e A 480i signal from the Video 1 or Video 2 input e A 480i signal from the ColorStream HD1 or HD2 input e A 480i 480p 720p 1080i 1080p or VGA 60 72 75Hz signal from the HDMI 1 2 3 4 input Note The auto aspect ratio feature is not applicable to the PC input 1 From the PREFERENCES menu highlight Auto Aspect 2 Press dor P to select On and then press Ext 48 When 4 3 Stretch is activated the size switching system changes 4 3 programs into full screen picture 1 From the PREFERENCES menu highlight 4 3 Stretch 2 Press or P to select On and then press ur Note When Auto Aspect is set to Off this feature will be grayed out Using the FREEZE feature 1 When viewing the TV press to make the picture a still picture 2 Toreturn to the moving picture press again Note Ifthe TV is left in FREEZE mode for more than 15 minutes the FREEZE mode will automatically be released and the TV will return to moving picture Using the FREEZE function for any purpose other than your private viewing may be prohibited under the
120. lable at the time of download 7 Press A V 4P and then press to select the level of blocking you prefer A box with an X is a rating that will be blocked Note e The additional rating system can only be downloaded one time You will not be able to download any updates to the rating system should such updates become available e The additional rating system is not designed transmitted or controlled by the TV or Toshiba nor is the availability of an additional rating system determined or controlled by Toshiba Similarly the rating of programs in an additional rating system is not determined transmitted or controlled by the TV or Toshiba e The additional rating system is an evolving technology therefore availability content and format may vary ak N e gt Chapter 6 Using the TV s features Independent rating system for broadcasters Ratings Description and Content themes Mature Audience Only This program is specifically designed to be viewed by adults and therefore may be unsuitable for children under 17 L Crude or indecent language S Explicit sexual activity V Graphic violence Parents Strongly Cautioned This program contains some material that many parents would find unsuitable for children under 14 years of age D Intensely suggestive dialogue L Strong coarse language S Intense sexual situations V Intense violence Parental Guidance Suggested This program contai
121. lish ANT CABLE In Antenna Auto Tuning Manual Tuning TV Settings Manual Setting AV Connection PC Settings Chapter 5 Setting up your TV Configuring the antenna input source for the ANT CABLE terminal 1 From the SETUP menu highlight ANT CABLE In ee oe SETUP Menu Language English ANT CABLE In Antenna Auto Tuning Manual Tuning TV Settings Manual Setting AV Connection PC Settings 2 Press 4orP to select the input source Antenna or Cable for the ANT CABLE input on the TV and press xr Programming channels into the TV s channel memory When you press A or on the remote control or TV control panel your TV will stop only on the channels you programmed into the TV s channel memory Follow the steps below to program channels into the TV s channel memory Auto Tuning Your TV can automatically detect all active channels in your area and store them in its memory After the channels are PEE automatically you can manually add or erase individual channels in the channel memory Note e You must configure the ANT CABLE input source before programming channels e If the ANT CABLE input is configured for Cable the automatic channel programming process erases channels that were previously programmed into the TV s memory e If the ANT CABLE input is configured for Antenna the automatic channel programming process adds newly found channels to the existing set of p
122. n program mode To cycle through each available device code and sample its functions 1 Press the appropriate mode select button on the remote control 2 While holding down f press 8 5 0 0 The remote control will enter program mode 3 Point the remote control at the target device and press or other function buttons that are available to be sampled 4 Ifthe device responds to the remote control Press feu to store the device code The mode select button will blink two times and the remote control will exit the program mode If the device does not respond to the remote control Press A and then press Repeat this step until the device responds to the remote control and then press fecal Note When a search cycle is completed the mode select button will blink three times The remote control will begin to cycle through the available codes again If no key is pressed within 10 seconds during programming the remote control will exit the program mode and return to the previous code Using the volume lock feature 8000 By default factory setting the remote control s volume keys A S and wre are locked to the TV device mode The remote control will operate the TV s volume even when TV is not the current device mode If you unlock the remote control s volume keys each device mode will have its own volume if the device ID has volume data
123. ns material parents may find unsuitable for younger children D Some suggestive dialogue L Infrequent coarse language S Some sexual situations V Moderate violence General Audience Most parents would find this program suitable for all ages Directed to Older Children This program is designed for children age 7 and above Note Programs in which fantasy violence may be more intense or more combative than other programs in this category are designated TV Y7FV All Children This program is designed to be appropriate for all children Independent rating system for movies Ratings Description and Content themes X X rated For adults only NC 17 Not intended for anyone 17 and under Restricted Under 17 requires accompanying parent or adult Parents Strongly Cautioned Some material may be inappropriate for children under 13 Parental Guidance Suggested Some material may not be suitable for children G General Audience Appropriate for all ages Note e If you place an X in the box next to None programs rated None or Not Rated will be blocked however programs that do not provide any rating information will not be blocked e To display the rating of the program you are watching press fea on the remote control If it is rated None the word NONE appears in the RECALL screen as shown below right If rating information is not provided no ratin
124. ntrol Ok 2 Install two AA size alkaline batteries Match the and oa on the batteries to the symbols on the battery compartment o 3 Slide the battery cover on to the remote control until the lock snaps Caution Batteries must not be exposed to excessive heat such as sunshine fire or the like Note e Be sure to use AA size alkaline batteries e Dispose of batteries in a designated disposal area e Batteries should always be disposed of with the environment in mind Always dispose of batteries in accordance with applicable laws and regulations e If the remote control does not operate correctly or if the operating range becomes reduced replace batteries with new ones e When necessary to replace batteries in the remote control always replace both batteries with new ones Never mix battery types or use new and used batteries in combination e Always remove batteries from the remote control if they are dead or if the remote control is not to be used for an extended period of time This will prevent battery acid from leaking into the battery compartment Chapter 3 Using the remote control Learning about the remote control The buttons used for operating the TV only are described here For the REGZA LINK remote control functions see the section Using REGZA LINK t page 59 For a complete list of the remote control s functions see the remote control funct
125. o Do not connect both types of video cable to VIDEO 1 at the same time or the picture performance will be unacceptable estandard audio cables if your VCR or camcorder has S video Note When you use a Cable box you may not be able to use the remote control to program or access certain features on the TV From Cable TV or antenna From Cable TV Cable box fj IN CH3 CH4 out ex in evi 0 Sym Stet i ez Standard ipa i A V cable VIDEO 2 inputs i To view the antenna or Cable signal Select the ANT CABLE video input source on the TV To view basic and premium Cable channels Turn OFF the VCR Select the ANT CABLE video input source on the TV Tune the TV to channel 3 or 4 whichever channel the Cable box output is set to Use the Cable box controls to change channels To view the VCR Turn ON the VCR Select the VIDEO 1 video input source on the TV To view the camcorder video Select the VIDEO 2 video input source on the TV To select the video input source press INPUT on the remote control 1s page 41 To program the TV remo control to operate other devices see Chapter 3 oO The unauthorized recording use distribution or revision of television programs videotapes DVDs and other materials is prohibited under the Copyright Laws of the United States and other countries and may subject you to civil and criminal liability 13 Chapter 2 Conn
126. ocate subsequent content Note If the previous or next file is not compatible it will be skipped automatically Chapter 7 Using the TV s advanced features To set the repeat mode 1 Press m The current repeat setting will appear 2 Press or to select Off All or 1 3 Press m or Em The setting is effective until the TV is turned off Compatibility files File format MP3 Sampling frequency 16 kHz 22 05 kHz 24 kHz 32 kHz 44 1 kHz 48 kHz Bit rate from 8 to 320kbps Total number of files Less than 500 per a folder Viewing JPEG files To view in Single View mode 1 When the thumbnail appears after starting the Media Player t page 67 press lt gt V A to select a file or folder If there are more pages in the list press or to move to the previous or next page fe Photo oO B Foider select Folder or File a o i 1 54 11 54 Fri 30 Jan E00000000 jpg 1920X1080 2 Press to begin viewing the selected file or to move to the next layer Press to return to the previous layer 3 Press to view the next file press to view the previous file Note If the previous or next file is not compatible it will be skipped automatically To view in Slide Show mode 1 To switch to the Slide Show mode press during the Single View mode To return to Single View mode press 8 again 2 Press to view the next file press lt to view the previous file Note If the previous or next fil
127. olution component video inputs ss page 14 e Digital Audio Out optical audio connection with Dolby Digital optical output format 1 page 52 e PC IN Analog RGB computer terminal t page 19 e IR OUT infrared terminal using the IR blaster cable for IR pass through device control t pages 12 and 15 ColorMaster allows you to adjust the TV s standard colors The menu for this feature has a unique black design to enhance contrast while you re adjusting the color ts page 65 e Expert Mode allows detailed calibration with red green and blue color selections t page 64 ClearScan 240 allows picture clarity for fast motion video with new Backlight Scanning technology t page 64 Resolution upconverts and enhances for a More Detailed Picture t page 63 AutoView allows you to automatically adjust picture settings based on ambient tet conditions and input signal content t page 49 e Dolby Volume eliminates Inconsistent TV volume on channel changes or commercials t page 53 e Media Player allows you to view your JPEG pictures and DivX video ss page 67 lan ENERGY STAR qualified Overview of steps for installing setting up and using your new TV Follow these steps to set up your TV and begin using its many exciting features 1 Observe the following when choosing a location for the TV e Read Important notes about your LCD TV t page 6 e Place the TV
128. on on the other hand the provisions of this limited warranty shall prevail How to Obtain Warranty Services If after following all of the operating instructions in this manual and checking the Troubleshooting section you find that service is needed 1 To find the nearest ASP visit TCL s web site at www toshiba ca or call toll free 1 800 268 3404 2 Present your bill of sale or other proof of purchase to the ASP For additional information visit TCL s website at www toshiba ca 79 Chapter 9 Appendix A copy of the GPL source code in this product may be obtained by contacting Toshiba Consumer Solutions at 800 631 3811 There will be a charge to cover the costs of providing the source code A copy of the LGPL source code in this product may be obtained by contacting Toshiba Consumer Solutions at 800 631 3811 There will be a charge to cover the costs of providing the source code Portions of this software are copyright lt 2007 gt The FreeType Project www freetype org All rights reserved This software is based in part on the work of the Independen JPEG Group Index A Antenna input configuration 37 Audio quality adjustments 52 Audio system connection s s 18 Auto ASpect onidcisatnnceetedisanrernataceserrs 48 Auto Brightness Sensor 65 AUIG INSU inir ia 39 Auto power Off cccccecseeeeteeeeneees 62 AUto
129. on of high definition video signals Because this is an evolving technology it is possible that some devices may not operate properly with the TV HDMI the HDMI logo and High Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC Chapter 2 Connecting your TV REGZA LINK connection You can control the basic functions of connected audio video devices using the TV s remote control if you connect a REGZA LINK compatible audio receiver or playback device For an explanation of setup an operations see pages 59 TV upper back panel HDMI IN TV right side panel Audio receiver Playback device REGZA LINK DVD player etc eel To connect an Audio Receiver and Playback Devices you will need e HDMI cables t page 12 Note e If several devices are connected REGZA LINK feature may not operate properly e For proper operation it is recommended that you use HDMI cables with the HDMI Logo HOMI Playback device REGZA LINK DVD player etc Before controlling the device s e After at tate the above connections set the REGZA LINK Setup menu as you desire 1 page 60 e The connected devices must also be set For details see the operation manual for each device e The REGZA LINK feature uses the CEC technology as regulated by the HDMI standard e This feature is limited to models incorporating Toshiba s
130. one of the TheaterWide picture sizes the top and bottom edges of the picture including subtitles or captions may be hidden To view the hidden edges either adjust the Picture Position or try viewing the program in 4 3 or Full picture size 46 Chapter 6 Using the TV s features Picture Size Picture Size Native for 480i HDMI 480p HDMI 720p 1080i and 1080p signal programs bodo oo e If receiving a 1080i 1080p 720p 480i HDMI or 480p HDMI signal program Native mode scales the video to display the entire picture within the borders of the screen i e no overscanning e This is especially useful for external HD sources such as DVHS movies or PC graphics e None of the picture is hidden Note e This mode is supported only for HDMI 1080i 1080p 720p 480i and 480p ColorStream 1080i and 720p and ANT CABLE digital inputs 1080i 1080p and 720p Depending on the input signals the border of the picture may be hidden displayed in black or noisy 4 3 BHE OOO FOOCOR OOO OOO Some program formats will display with sidebars and or bars at the top and bottom gt Full for 16 9 480i 480p source programs only TR OOO 0 0 O If receiving a squeezed 4 3 format progran the picture is stretched wider to fill the width of the screen but not stretched taller for 1080i 1080p and 720P program sources OO OL OOO OOOO The edges surrounding the pi
131. ontrol or the TV remote control that you previously programmed to operate the device r Chapter 3 toward the front of the TV and press the button for the desired function The signal passes from the remote control through the TV to the device via the IR blaster cable Note e If you use the device s remote control to operate the device you also will need to use the TV s remote control to operate the TV e The IR pass through feature does not support all R controlled devices satisfactory performance may not be attainable with certain devices If you cannot locate the device s infrared sensor 1 Turn OFF the device 2 Starting at the lower left corner of the device place the end of the device s remote control with the infrared emitter so it touches the front of the device and press POWER Do not use the TV s remote control for this step 3 If the device turns on the point at which the remote control touched the device is the location of the sensor 4 Ifthe device does not turn on move the remote control slightly to the right and press POWER again 5 Repeat step 4 until you locate the device s infrared sensor 15 Chapter 2 Connecting your TV Connecting an HDMI or DVI device to the HDMI input The HDMI input on your TV receives digital audio and uncompressed digital video from an HDMI source device or uncompressed digital video froma DVI Digital Visual Inter
132. press 1 2 5 1 then 8 Switching between two channels using Channel Return The Channel Return feature allows you to switch between two channels without entering an actual channel number each time 1 Select the first channel you want to view 2 Select a second channel using the Channel Number buttons and the dash Goo button if needed 3 Press on the remote control The previous channel will display Each time you press rmy the TV will switch back and forth between the last two channels that were tuned Note If you press wrm from a non antenna input the TV will return to the last viewed input Chapter 6 Using the TV s features Switching between two channels using SurfLock The SurfLock feature temporarily memorizes one channel to the button so you can return to that channel quickly from any other channel b ressing m To memorize a channel to the utton 1 Tune the TV to the channel you want to program into the button 2 Press and hold for about 2 seconds until the message Memorized appears on screen The channel has been programmed to the button 3 You can then change channels repeatedly and when you press bm the memorized channel will be tuned The TV will return to the memorized channel one time only Once you press im and then change channels again the CH RTN memory will be cleared and the button will function as Channel Return by switching back and forth bet
133. put skip on page 38 e Inputs that are set to skip will be grayed out and will be skipped over only when selecting inputs by repeatedly pressing u e f one or more REGZA LINK devices are connected to an HDMI input the REGZA LINK icon will appear in the input selector e When the Auto Input feature is set you can also select a video input source by pressing and holding the corresponding MODE SELECT button for 2 seconds t page 39 To select a REGZA LINK device 1 Press A or W to highlight an appropriate HDMI input 2 Press P to display the list of REGZA LINK devices for that input 3 If there are multiple REGZA LINK devices on the input use A or W to highlight a particular device 4 Press to select the device and change input 41 Chapter 6 Using the TV s features Tuning channels Tuning channels using the Channel Browser The Channel Browser provides an easy navigation interface for all your channels and inputs This feature allows you to e Navigate the contents of all of your inputs e Keep a list of po favorite channels see Favorites Browser below e Keep a history of the last 32 channels or inputs viewed e Quickly surf and tune your recently viewed channels inputs from the Channel Browser History List illustrated on the next page Surf via Browse mode to immediately tune channels as you highlight them in the Channel Browser or Select mode to surf over
134. r or satellite ele To record a TV program while watching a DVD to either set of ColorStream terminals on the TV HD1 Turn ON the VCR Tune the VCR to the channel to or HD2 The ColorStream HD1 and HD2 terminals record Select the ColorStream HD1 video input can be used to display Progressive 480p 720p source on the TV to view the DVD 1080p and Interlaced 480i 1080i Please check the Owner s Manual of the DVD player or satellite in order to determine the best output signal available 1080p 24Hz 30H2 50H2 25Hz are not supported To select the video input source press INPUT on the remote control rs page 41 To program the TV remote control to operate other devices see Chapter 3 If your DVD player or satellite receiver does not have The unauthorized recording use distribution or component video connect a standard A V cable to revision of television programs videotapes VIDEO 2 on the side panel If your DVD player has DVDs and other materials is prohibited under the HDMI video see page 16 Copyright Laws of the United States and other countries and may subject you to civil and To view antenna or Cable channels criminal liability Select the ANT CABLE video input source on the TV 14 Chapter 2 Connecting your TV Connecting a device to the IR OUT infrared terminal using the IR blaster cable for IR pass through device control You can use the TV s IR OUT terminal infrared pass through
135. r overhead power lines or other electrical circuits e Never attempt to install any of the following during lightning activity a an antenna system or b cables wires or any home theater component connected to an antenna or phone system 31 Care For better performance and safer operation of your TOSHIBA TV follow these recommendations and precautions 32 If you use the TV in a room whose temperature is 32 F 0 C or below the picture brightness may vary until the LCD warms up This is not a sign of malfunction 33 Always unplug the TV before be cleaning Gently wipe the display panel surface the TV screen using a dry soft cloth only cotton flannel etc A hard cloth may damage the surface of the panel Avoid contact with alcohol thinner benzene acidic or alkaline solvent cleaners abrasive cleaners or chemical cloths which may damage the surface Never spray volatile compounds such as insecticide on the cabinet Such products may damage or discolor the WARNING cabinet RISK OF ELECTRIC SHOCK Ay 34 Never spill liquids or push objects of any kind into the TV cabinet slots 35 While it is thundering do not touch the connecting cables or apparatus 36 For added protection of your TV from lightning and power surges always unplug the power cord and disconnect the antenna from the TV if you leave the TV unattended or unused for long periods of time 37 ALWAYS unpl
136. re Red Offset Green Offset Blue Offset Red Gain Green Gain Blue Gain Reset 4 To revert the adjustments to the factory defaults select Reset on the screen and press D Note If Picture Mode is set to AutoView only the Color Temperature setting will be available Using the advanced sound settings features Using the surround sound feature Surround Voice Enhancement and Dynamic Bass Boost help to create a thrilling surround sound experience with deep rich bass from stereo sound sources Your TV s audio will sound fuller richer and wider 1 Put the TV in STEREO mode r Selecting stereo SAP broadcasts on page 52 2 From the SOUND menu highlight Advanced Sound Settings and press 3 3 Press W or A to highlight the feature you want to adjust and then press lt or P to adjust the item Mode Description To select the desired mode Spatial Cinema or Off Spatial It reproduces an expanding Surround and deep sound Cinema It delivers a sound with realistic sensation that you feel ina movie theater Voice To turn the vocal emphasis effect On or Enhancement Off Dynamic Bass Boost To select the desired bass expansion level Off Low or High Chapter 7 Using the TV s advanced features Using the Media Player The TV allows you to enjoy photos movies or music contents stored on a USB device or SD memory card only for photos Note e SD memory card
137. receptacles and the point GA n where they exit from the apparatus mA 11 Only use attachments accessories specified by the manufacturer 12 Use only with the cart stand tripod bracket or table specified by the manufacturer or sold with the apparatus When a cart is used use caution when moving the cart apparatus y combination to avoid injury from tip over ES 13 Unplug this apparatus during lightning storms or when unused for long periods of time 14 Refer all servicing to qualified service personnel Servicing is required when the apparatus has been damaged in any way such as power supply cord or plug is damaged liquid has been spilled or objects have fallen into the apparatus the apparatus has been exposed to rain or moisture does not operate normally or has been dropped eo Additional Safety Precautions 14a CAUTION If the TV is dropped and the cabinet or enclosure surface has been damaged or the TV does not operate normally take the following precautions e ALWAYS turn off the TV and unplug the power cord to avoid possible electric shock or fire e NEVER allow your body to come in contact with any broken glass or liquid from the damaged television The LCD panel inside the TV contains glass and a toxic liquid If the liquid comes in contact with your mouth or eyes or your skin is cut by broken glass rinse the affected area thoroughly with water and consult your doctor 19 NEVER route the
138. ress E 2 Press A or to select Base Color Adjustment and press amp The Base Color Adjustment window will appear Base Color Adjustment Hue Saturation Brightness C Green 1 y L Blue 1 E Yellow 1 1 Magenta Keven 1 Press A or to select to mene the color you want to adjust and then press P Press lt or P to select either Hue Saturation or Brightness Press A or W to adjust the setting and then press O a fF Q Repeat steps 3 through 5 to adjust any other color To revert the adjustments to the factory defaults select Reset on the screen and press D 65 Chapter 7 Using the TV s advanced features Selecting the color temperature To adjust the color temperature 1 From the PICTURE menu hi hlight Advanced Picture Settings and press es 2 Press A or YW to select Color Temperature and press re 3 Press A or W to highlight Color Temperature 4 Press 4 or to adjust the level The adjustment range is 0 warm to 10 cool then press Exr Note If the Picture Mode is set to AutoView the adjustment range is 5 to 5 To adjust RGB Offset and RGB Gain 1 From the PICTURE menu oo Advanced Picture Settings and press 2 Press A or YW to select Color Temperature and press re 3 Press A or to highlight the menu you want to adjust and then press or P to adjust the setting and press to return to the previous menu Color Temperature Color Temperatu
139. rogrammed channels and does NOT erase channels that were previously programmed into the TV s memory To remove an Antenna source channel from the memory you must set it to Skip e To tune the TV to a channel not programmed in the channel memory you must use the Channel Number buttons on the remote control e Programming channels when the ANT CABLE input is configured for Cable will take substantially longer than when the antenna input is configured for Antenna This is normal however once channel programming is finished you should not have to repeat the programming process again unless your Cable TV service lineup changes significantly 1 Configure the ANT CABLE input if you have not already done so ts left hand column 2 From the SETUP menu highlight Auto Tuning 3 A screen will appear warning that previous programs and settings will be deleted Auto Tuning Previous settings will be lost Press EXIT for no change 4 Press 8 to start Auto Tuning The TV will automatically cycle through all the channels and store all active channels in the channel memory When Auto Tuning is finished press 4 or S to view the programmed channels Manual Tuning After automatically programming channels into the channel memory you can manually enter channels if the physical channel is known 1 From the SETUP menu highlight Manual Tuning and press 2 Use the Channel Numbers on the remote control to enter th
140. s maximum current 0 2 W in standby mode 47ZV650U 2 4 Arms maximum current 0 3 W in standby mode 55ZV650U 2 8 Arms maximum current 0 3 W in standby mode Audio Power 10 W 10 W Speaker Type Main Two 2 5 8 x 5 1 8 inches 65 x 130 mm Twiter aa ot for 42ZV650U wo 1 1 4 inches 32 mm Video Audio Terminals S VIDEO INPUT Y 1 V p p 75 ohm negative sync C 0 286 V p p burst signal 75 ohm VIDEO AUDIO INPUT VIDEO 1 V p p 75 ohm negative sync AUDIO 150 mV rms 30 modulation equivalent 22 k ohm or greater ColorStream component video HD INPUT VIDEO Y 1V p p a ohm Pr 0 7 V p p 75 ohm Ps 0 7 VEP 75 ohm Suggested formats 1080p 1080i 720p 480p 480i AUDIO 150 aves 22 k ohm or greater 74 HDMI INPUT HDMI compliant HDCP compliant Audio Lip Sync supported Deep Color supported 10 bit 4 4 4 12 bit 4 4 4 Suggested formats See table on the next page HDMI Audio 2 channel Linear PCM 32 44 1 48 kHz sampling frequency 16 20 24 bits per sample FIXED AUDIO OUTPUT 150 mv rms 30 modulation equivalent 2 2 k ohm or less DIGITAL AUDIO OUTPUT Optical type IR OUT 3 V p p 3 5 mm mono socket PC INPUT 15 Pin D sub Analog RGB Dimensions include foot stand 42ZV650U Width 41 3 4 inches 1 058 mm Height 28 5 8 inches 724 mm Depth 13 inches 329 mm 47ZV650U Width 46 3 8 inches 1 176 mm Height 31 1 4 inches 792 mm Depth 13 inches 329 mm 55ZV65
141. s or registered trademarks of HDMI Licensing LLC Manufactured under license from Dolby Laboratories Dolby and the double D symbol are trademarks of Dolby Laboratories 11 Chapter 2 Connecting your TV Overview of cable types HDMI cable with HDMI Logo HOMI Cables can be purchased from most stores that sell audio video devices Before purchasing any cables be sure of connector types required by your devices and the length of each cable Coaxial F type cable GO Coaxial F type cable is used for connecting your antenna cable TV service and or cable converter box to the ANT CABLE input on your TV Standard A V cables red white yellow FOA Standard A V cables composite video usually come in sets of three and are for use with video devices with analog audio and composite video output These cables and the related inputs on your TV are typically color coded according to use yellow for video red for stereo right audio and white for stereo left or mono audio S video cable CD S video cable is for use with video devices with S video output Separate audio cables are required for a complete connection Note An S video cable provides better picture performance than a composite video cable If you connect an S video cable be sure to disconnect the standard composite video cable or the picture performance will be unacceptable Component video cables red green blue
142. see Chapter 2 e Antenna reception may be poor Use a highly directional outdoor antenna if applicable e The station may have broadcast difficulties Try another channel e Adjust the picture qualities ts page 49 e If you are using a VCR make sure ss on the remote control is set correctly ns page 22 e Do not connect both a standard video cable and an S video cable to the VIDEO 1 input at the same time rs page 13 Video Input Selection problems e lf the Input Selection window does not appear when you press on the remote control or the TV control panel press a second time which will change to the next video input source and display the Input Selection window Cannot view external signals or channel 3 or 4 e If you cannot view signals from external devices connected to VIDEO 1 VIDEO 2 ColorStream HDMI 1 HDMI 2 HDMI 3 HDMI 4 PC or from channels 3 or 4 make sure the Input Lock is set to Off ce page 56 Poor color or no color e The station may have broadcast difficulties Try another channel e Adjust the Tint and or Color ss page 49 Poor composite or S video picture e If the TV is connected to an external A V device e g DVD player video game system set top box etc try using a ColorStream or HDMI video connection instead e If you connect an S video cable be sure to disconnect the standard composite video cable Do not connect both types of video cable at the same time Picture and sound are out of sync
143. sher Funai Gateway GE Go Video Go Vision GoldStar Goodmans Gradiente Greenhill Chapter 3 Using the remote control 20490 21020 20672 21004 20831 20876 20833 20869 21003 21277 20571 20778 21086 21107 21177 20831 20503 20539 21087 20816 20874 21023 21024 21117 21129 21502 20705 20784 20705 20770 20833 20869 21169 21172 21234 21242 20770 20770 20490 20634 20778 21407 20672 20675 21270 20705 20675 21068 21127 20521 21003 20591 20675 20821 21268 20591 20503 20539 20770 20821 21268 20651 20670 20675 21268 21334 21073 21158 20522 20815 20717 20573 20744 20717 20715 20741 20783 20833 20869 21044 21075 21099 21158 21304 21730 21071 21072 20741 20801 20869 20790 20490 20651 20717 Grundig Harman Kardon Hitachi Hiteker Humax iLo Initial Insignia Integra IRT JBL Jensen JMB JVC Kawasaki Kenwood KLH Kloss Koss Lasonic Lecson Lenoxx LG LiteOn Loewe Logix Magnasonic Magnavox Marantz McIntosh Medion Memorex Microsoft Minato Mintek Mitsubishi NAD Naiko NEC Nesa NexxTech Norcent Onkyo Optimus Orion Oritron Palsonic 20539 20705 20582 20702 20573 20664 21247 20672 21588 21348 20717 21268 20571 20627 20783 20702 21016 20695 20558 20623 20867 21164 20790 20490 20534 20717 20790 21020 21149 20533 20651 21061 20627
144. splayed on the bottom of the screen e Content number Total number only for the contents stored in the same directory e Movie title e Progress time e Audio format e Repeat status icon 2 Press ful again to remove the information Note The file status information will disappear after about 6 seconds To register your TV to DivX account 1 From the APPLICATIONS menu highlight Media Player and press 2 a A or Y to highlight DivX VOD and press 3 ADivX VOD window appears and you can find the eight character registration code For details on registration visit the DivX website at http vod divx com 4 Copy the activation file to a USB device and play it in the TV Chapter 7 Using the TV s advanced features Compatibility files File format DivxX Maximum video resolution 720 x 480 30 fps Total number of files Less than 500 per a folder e ABOUT DIVX VIDEO DivX isa digital video format created by DivX Inc This is an official DivX Certified or DivX Ultra Certified device that plays DivX video e ABOUT DIVX VIDEO ON DEMAND This DivX Certified device must be registered in order to play DivX Video on Demand VOD content First generate the DivX VOD registration code for your device and submit it during the registration process Important DivX VOD content is protected by a DivX DRM Digital Rights Meneeentent lt stem that restricts playback to registered DivX Certified dev
145. te control is not preprogrammed to operate you will need to program the remote control See Programming the remote control to operate your other devices at right Default device mode control before MODE SELECT programming TV Toshiba TV CABLE SAT Toshiba Satellite receiver DVD Orion DVD VCR PVR Toshiba VCR MODE SELECT Device mode control after programming TV Toshiba TV CABLE SAT DVD Multi brand video audio devices VCR PVR Note Although your new TV s remote control includes codes for many devices it may not include codes for some or all of the features on certain devices you wish to control If you are unable to program the TV s remote control to operate your device or some of the features on that device use the device s remote control or the controls on the device 24 Device code setup 1 Find the code for your device brand in the remote control device code table on pages 26 33 If more than one code is listed try each one separately until you find one that works 2 Press the applicable mode select button CABLE SAT DVD or VCR PVR until the mode select button blinks 3 times 3 While holding down fe press the five digit device code for your device e If a valid code is entered the mode select button will blink twice e If an invalid code is entered the mode select button will blink one long blink 4 Point the remote control at the device an
146. the SETUP menu highlight Manual Setting and press The setting window will appear 3 Press A or to select e skip off and press Ext Labeling video input sources You can label video input sources 1 Tune to the input you want to label 2 From the SETUP menu highlight Manual Setting and press The setting window will appear 3 Press gt to move from the skip selection in order to select a label and pressA or to put in the desired characters and press 8 Manual Setting Label VCR Video2 Ev c R 4 Repeat steps 1 through 3 for other inputs 5 To save your settings press Note e Available characters are 0 9 A Z and e To label an HDMI input you need to set Enable REGZA LINK to Off t page 60 Chapter 5 Setting up your TV Setting the Auto Input feature Setting the time zone This feature allows you to change TV inputs using the MODE SELEC buttons TV CABLE SAT DVD VCR PVR on the remote control Once an input has been set for a specific MODE SELECT button the TV will automatically switch to the input when you press hold the MODE SELECT button for 4 seconds and release it Auto Input settings options for each MODE SELECT button are shown below eTV ANT CABLE CABLE SAT ANT CABLE Video 1 Video 2 ColorStream HD1 ColorStream HD2 HDMI 1 HDMI 2 HDMI 3 HDMI 4 PC e DVD Video 1 Video 2 ColorStream HD1 ColorStream HD2 HDMI
147. through the available demo settings Next ANT CABLE In setup window willa per Press lt or P to select the input source Cable or Antenna for the ANT CABLE input on the TV ANT CABLE In If you select Antenna the Channel Tuning Mode setup window will appear To tune only digital channels select Digital To tune digital channels preferentially over analog when entering channel number directly select Auto For normal tuning select Standard Press to continue to Auto Tuning 36 7 Press to select Start Scan and continue with the Auto Tuning You can stop the Initial Setup with Ext However if ou do not finish the entire Initial Setup process the nitial Setup window will appear every time you turn on the TV Quick Setup from the SETUP menu You can conveniently change various basic TV settings from the Quick Setup item located under the SETUP menu 1 2 3 4 Press MED to open the SETUP menu Press A or W to select Quick Setup and press A confirmation message will appear on the screen press 4 or P to select Yes and press 8 Other procedures are same as Initial Setup c left hand column Selecting the menu language You can choose from three different languages English Francais and Espanol for the on screen display of menus and messages 1 2 From the SETUP menu highlight Menu Language Press dor P to select your preferred menu language Menu Language Eng
148. tion might broadcast another language as a second audio program If you have SAP on you will see the current program on the screen but hear the other language instead of the program s normal audio e Ifyou have SAP on and the station you are watching is not broadcasting a second audio program the station s normal audio will be output However occasionally there is no sound at all in SAP mode If this happens set the MTS feature to Stereo mode Adjusting the audio quality You can adjust the audio quality by adjusting the bass treble and balance 1 From the SOUND menu highlight the item you want to adjust Bass Treble or Balance 2 Press dor to adjust the level of desire item and then press xr e lt makes the bass or treble weaker or increases the balance in the left channel depending on the item selected e gt makes the bass or treble stronger or increases the balance in the right channel depending on the item selected Chapter 6 Using the TV s features Selecting the optical audio output format You can use this feature to select the optical audio output format when you connect a Dolby Digital decoder or other digital audio system to the DIGITAL AUDIO OUT terminal on the TV 1 Tunetoa digital source on the ANT CABLE input 2 From the SETUP menu highlight AV Connection and press amp 3 Press A or W to select Digital Audio Output 4 Press orP to select Auto or PCM then press E
149. to remotely operate through the TV many infrared remote controlled devices such as Toshiba infrared remote controlled VCRs or DVD players enclosed within an entertainment center or similar cabinet Without the IR OUT connection the device sel would need to be visible to operate it remotely You will need dual wand IR blaster cable t page 12 other audio video cables as required to connect the device s to the TV a pages 13 14 and 16 Front of IR controlled DVD player for example Infrared sensor A IR blaster cable wand approx 1 inch from device TV upper back panel rin COLOR COLOR STRI HD1 HD2 VIDEO 1 IN VIDEO FIXED Albis OUT O To connect the IR blaster cable 1 Locate the infrared sensor on the front of your device This sensor is marked on some devices 2 Align one of the IR blaster cable s wands about 1 inch away from the infrared sensor on the front of the device and attach it using double sided mounting tape If you have a second device attach the second wand in a similar manner See illustration Note If you do not have a second device coil the second wand with a rubber band and leave it behind the TV 3 Plug the IR blaster cable s plug into the TV s IR OUT terminal To control the device s Point either the device s remote c
150. ts or service made necessary by use of incompatible third party products f Service made necessary by the simultaneous use of this Television and connected equipment g Modifications to the Television not approved in writing by TCL and service made necessary by the use or installation of non Toshiba modifications to the Television h Service of a Television on which the TOSHIBA label or logo rating label or serial number have been defaced or removed i On site service and repair of the Television and j Damage to the Television caused by failure to follow the specifications User manuals or guides as to usage and or storage Chapter 9 Appendix Disclaimer and Limitation of Remedy TO THE EXTENT NOT PRECLUDED BY LAW ALL OTHER EXPRESS AND IMPLIED WARRANTIES CONDITIONS AND REPRESENTATIONS FOR THIS TELEVISION INCLUDING THE IMPLIED WARRANTIES CONDITIONS AND REPRESENTATIONS OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE HEREBY DISCLAIMED AND EXCLUDED IF THE APPLICABLE LAW STATUTORY OR OTHERWISE PRECLUDES THE EXCLUSION OF ANY IMPLIED WARRANTIES CONDITIONS AND REPRESENTATIONS THEN SUCH IMPLIED WARRANTIES CONDITIONS AND REPRESENTATIONS ARE OTHERWISE LIMITED IN DURATION TO THE TERM OF THIS EXPRESS WRITTEN LIMITED WARRANTY TO THE EXTENT NOT PRECLUDED BY LAW STATUTORY OR OTHERWISE THIS WRITTEN WARRANTY SUPERCEDES AND SPECIFICALLY DISCLAIMS ANY OTHER WARRANTY CONDITION OR REPRESENTATION NOT STATED IN THIS WA
151. ts specified by the manufacturer e Upon completion of service ask the service technician to perform routine safety checks to determine that the TV is in safe operating condition 43 The fluorescent lamp s in the LCD panel contain a small amount of mercury When the TV reaches the end of its useful life dispose of the used TV by the approved method for your area or ask a qualified service technician to properly dispose of the TV Note The lamp s inside this product contain Ay mercury Disposal may be regulated due to environmental considerations For disposal or recycling information contact your local authorities or the Electronics Industries Alliance www eiae org Choosing a location for your LCD TV To Display your LCD TV on the included Pedestal Stand Observe the following safety precautions 1 Read and Follow the pedestal assembly instructions included with the pedestal CAUTION Before beginning pedestal assembly carefully lay the front of the LCD Panel face down ona flat cushioned surface such as a quilt or blanket Leave the bottom of the unit protruding over the edge of the surface and assemble the pedestal as indicated below Note Extreme care should always be used when attaching the pedestal stand to avoid damage to the LCD panel 2 Place the TV on a sturdy level surface that can support the weight of the TV 3 Be sure to secure the TV to a wall stud pillar surface or other immovable structure
152. ug the TV to completely disconnect from mains power When the TV is turned off using the on off switch it is not completely disconnected from power and a minute amount of current is still consumed 38 During normal use the TV may make occasional snapping or popping sounds This is normal especially when the unit is being turned on or off If these sounds become frequent or continuous unplug the power cord and contact a Toshiba Authorized Service Center 39 WARNING RISK OF AN SERIOUS PERSONAL INJURY OR EQUIPMENT DAMAGE Never strike the screen with a sharp or heavy object 40 eThe LCD screen of this product can be damaged by ultraviolet radiation from the sun When selecting a location for the television avoid locations where the screen may be exposed to direct sunlight such as in front of a window e Never touch press or place anything on the LCD screen These actions will damage the LCD screen If you need to clean the LCD screen follow the instructions in item 33 on this page Service WARNING 41 AN RISK OF ELECTRIC SHOCK Never attempt to service the TV yourself Opening and removing the covers may expose you to dangerous voltage or other hazards Failure to follow this WARNING may result in death or serious injury Refer all servicing not specified in this manual to a Toshiba Authorized Service Center 42 If you have the TV serviced e Ask the service technician to use only replacement par
153. utomatically set to On and grayed out Using the Backlight Adjustment Pro This feature adjusts the backlight so that it can change to match the ambient light conditions 1 From the PICTURE menu highlight Advanced Picture Settings and press S 2 Press A or YW to select Auto Brightness Sensor Settings and press 3 Press Aor W to highlight Backlight Adjustment Pro and press The Backlight Control Level window will appear 4 Press 8 to display the adjustment window Press lt or gt to select the point and press A or Y to adjust the level The adjustment range is from 0 to 100 Backlight Adjustment Pro Backlight Control Level 5 Press to fix the adjustment To cancel the adjustment when selecting a point select Cancel on the screen To revert the adjustments of all points to the factory defaults select Reset on the screen and press Note If the Auto Brightness Sensor is set to Off this feature will be grayed out Using the ColorMaster feature The ColorMaster feature allows you to adjust standard colors 1 From the PICTURE menu hi hlight Advanced Picture Settings and press ea 2 Press A or Y to select ColorMaster and press lt 4 or P to select On then press xr Using the Base Color Adjustment When ColorMaster is set to On the list of base colors will be displayed You can select a base color to adjust 1 From the PICTURE menu hi hlight Advanced Picture Settings and p
154. ween the last two channels that are tuned This feature also works for external inputs 45 Chapter 6 Using the TV s features Selecting the picture size You can view many program formats in a variety of icture sizes Native 4 3 Full TheaterWide 1 heaterWide 2 TheaterWide 3 Normal and Dot by Dot Note The picture size illustrations are examples only The format of the image in any of the picture sizes will vary depending on the format of the signal you are currently watching Select the picture size that displays the current program the way that looks best to you You can save separate picture size preferences for each input on your TV To select the picture size using the remote control 1 Press pesa on the remote control 2 While the Picture Size screen is open you can do one of the following to select the desired picture size e Repeatedly press pesz e Press the corresponding Number button while the Picture Size screen is open e Press A or W and while the Picture Size screen is open Note Some of the picture sizes may not be available depending on the receiving signal format Using these functions to change the picture size i e changing the height width ratio for any purpose other than your private viewing may be prohibited under the Copyright Laws of the United States and other countries and may subject you to civil and criminal liability Note If you select
155. when the TheaterLock setting is set to On 1 From the PICTURE menu highlight TheaterLock 2 Press lt orP to select On and then press i Viewing the Control Visualization window This feature displays a histogram and control curve illustrating the brightness of the TV 1 From the PICTURE menu hi hlight Control Visualization and press The histogram window will appear Control Visualization Distribution Brightness Control Curve Output Input 2 Press to close the window and go back to menu If no key is pres within 10 minutes it closes automatically 50 Analog CC Mode The closed caption mode has two options Captions An on screen display of the dialogue narration and sound effects of programs and videos that are closed captioned usually marked CC in program ides Text An on screen display of information not related to the current program such as weather or stock data when provided by individual stations To turn on the closed caption mode 1 From the SETUP menu highlight TV Settings and press amp 2 Press Wor A to select Closed Captions Settings and press amp 3 Press V or A to select Closed Captions and press lt or P to select On To view captions or text From the Closed Captions Settings menu highlight the Analog CC Mode eTo view captions Press or gt to highlight CC1 CC2 CC3 or CC4 Giant pandas eat leaves a owe
156. with standard optical out signals may not work properly creating a high noise level that may damage speakers or headphones THIS DAMAGE IS NOT COVERED BY YOUR WARRANTY e The DIGITAL AUDIO OUT terminal may not output some digital audio sources because of copy restrictions e The Dolby Digital format is only available when tuned to a digital RF channel Manufactured under license from Dolby Laboratories Dolby and the double D symbol are trademarks of Dolby Laboratories Connecting an audio system This connection allows you to use external speakers with an external analog audio amplifier to adjust the sound level You will need estandard audio cables Analog audio amplifier TV upper back panel rN IN IN coron cotor PGHOMI WONO YD 7 SVIDEO To control the audio 1 Turn on the TV and the stereo amplifier 2 Minimize the sound volume from the TV s built in speakers and control the volume level using the amplifier s remote control Chapter 2 Connecting your TV Connecting a personal computer PC With either the PC IN or HDMI connection you can watch your computer s display on the TV and hear the sound from the TV s speakers To connect a PC to the PC IN terminal on the TV When connecting a PC to the PC IN terminal on the TV use an analog RGB 15 pin computer cable and a PC audio cable TV upper back panel

Download Pdf Manuals

Related Search

Related Contents

mod. FINGER007  Gear Head KB5150W  Tournament Program System Manual de usuario  Gigabyte GA-MA78LMT-S2 motherboard  Conbextra GV - Disatec, SL  Mode d`emploi  MODEL 2114-OWS OIL / WATER LEVEL TRANSMITTER User Manual  Tronix-Christmas Catalog-2015_2016    article de presse IC-M91D Hors-Bord Magazine  

Copyright © All rights reserved. Failed to retrieve file