MX U6 MX U8 MX U10 MX U12
Contents
1. 2 wv ma NC wur m ADA A 4 A Y Y AES Vom 0v e 4 5 11 Check the loader s stability MX Y 19 rue de Rennes BP 83221 F 35690 ACIGN 11 Modification reserved 6 LOAD E R H ITC H N G y You will also find a video showing the unhitching hitching on www m x eu 6 1 Check on the L H R H side beams that the locking indicators are in the green area and that no object will obstruct the loader hitching The bracket are designed with a roller and a ramp which will lift the loader when hitching Indicators in the green ready to hitch 6 2 Drive the tractor forward in order to guide the loader frame on to the brackets until the catches are automatically triggered The loader is locked when indicators are in the green area If the indicators are still in the red zone refer to the Difficult hitching section 6 3 Connect the hydraulic s and electric s 6 3 1 Loader with MACH System Hold the housing with two hands and using the back of the housing lift the valve cover and fit the guide bars vertically into place MM Y 19 rue de Rennes BP 83221 F 35690 ACIGN 12 Modification reserved 6 3 2 Loader without MACH System Remove the plastic covers on the couplings Connect the couplings Open the tap EN YA M E so MA a Ld bd 6 4 Remove L H and R H side parking stands and place them in the corresponding side s cross beam L H in lower part of cross be2. Hitching and unhitching of the implements Full use of the controls J 19 rue de Rennes BP 83221 F 35690 ACIGN 5 Modification reserved 1 SAFETY INSTRUCTIONS Control the loader only from the driver s seat Do not let go of the controls until the movements are complete Do not leave the seat before locking the controls to prevent any movement Never leave the tractor while its loader is lifted Following loader use park the tractor with the loader lowered to the ground Itis compulsory to ensure that nobody is in the area while the loader is in use The operation must use the implement designed and recommended by MX for the work to be carried out The transport or elevation of persons using the loader is forbidden Ensure tractor stability by using a counterweight Please check the information regarding the counterweight in this user manual Restrict all movements while the load is lifted as the tractor may become unbalanced The maximum front axle safe load provided by the tractor s manufacturer must not be exceeded The maximum front tyres safe load provided by the tyres s manufacturer must not be exceeded Check regularly tyres pressure Regularly check the presence of safety pins and bolts Do not replace with any other object such as nails wire etc Hitchtheloaderonlytoatractorfitted witharoll overprotective structure ROPS orafallingobjectprotective struc
3. LOADER MX U6 MX US MX U10 MX U12 User manual Please read carefully before using MX loader UK 364130 AD 0411 Original instructions Dear users Thanks you for confidence in our product We are sure it will give you full satisfaction By taking a few minutes to read this manual you will be able to obtain the best results from your MX loader extend its lifespan and work in complete safety The loader user manual is a very important document please keep it with you in order to be able to use it if required Leave it available to any other user and give it to the next owner of this loader Pictures and technical information included in this document may not correspond precisely to your loader but the working conditions will be the same CONTENTS 1 SAFETY REGULATIONS 2 SAFETY STICKERS 3 IDENTIFICATION PLATE 4 COUNTERWEIGHT 5 LOADER UNHITCHING 6 LOADER HITCHING 7 IMPLEMENT UNHITCHING 8 IMPLEMENT HITCHING 9 IMPLEMENT CARRIER FRAME MODELS 10 IMPLEMENT LEVEL INDICATOR 11 SHOCK ELIMINATOR SYSTEM 12 SAFETY DEVICE ON LIFTING CROWDING 13 MAINTENANCE 14 GENERAL INFORMATION 15 CONTROL 16 TECHNICAL SPECIFICATIONS DECLARATION OF CONFORMITY Page 12 14 15 17 18 19 19 19 20 21 23 24 The loader is a complex machine The end user must read this instruction book before first use Familiarise yourself with Safety instructions Hitching and unhitching of the loader
4. M 10 M 12 M 14 M 16 M 18 M 20 M 22 M 30 x 150 M 40 x 150 14 GENERAL INFORMATION Each implement is designed for a specific use and has its own resistance limits Land clearing and stump extraction are forbiden Such work should be carried out by a specialist vehicle and is not possible for an agricultural loader Use the tractor s power to enter in the material to be moved rather than approaching it with speed which will generate high stress on tractor and loader When the load to be manoeuvred is too heavy do not apply force to the hydraulic components This also applies when rams are fully closed or extended Please release the control lever When ground levelling work at a slow speed with the implement at a maximum angle of 50 with respect to the ground Operate with flexibility and in a judicious manner MX Y 19 rue de Rennes BP 83221 F 35690 ACIGN 20 Modification reserved 15 CONTROL Important Never leave the tractor with loader in raised position All spool valves produce an internal leak required for correct operation 15 1 On tractor valves Please report to the tractor s instruction book 15 1 1 Front rear control selector option From the original joystick of the tractor the operator can control the MX loader or the rear couplers from the cab Front rear control selector option 15 2 On MX valves 15 2 1 Security Involuntary loader man
5. 85 m 4 00 m 4 15 m Maximum height under horizontal bucket 1 3 50 m 3 60 m 3 75 m 3 90 m Maximum height under dumped bucket 2 2 95 m 3 05 m 3 20m 3 35 m Digging depth 3 0 20 m 0 20 m 0 20 m 0 20 m Dumping angle at maximum height 4 52 55 55 55 Crowd angle 5 47 47 47 47 Lift force at implement pivot 1900 Kg 2100 Kg 2400 Kg 2400 Kg Lift capacity at implement pivot over the entire lifting range 1500 Kg 1900 Kg 2200 Kg 2200 Kg Payload on pallet 0 60 m in front of the forks Without parallelogram 1370 Kg 1750 Kg 1600 Kg At ground level With parallelogram 1400 Kg 1650 Kg 1780 Kg 1825 Kg Without parallelogram 1200 Kg 1650 Kg 1550 Kg At2 m height With parallelogram 1400 Kg 1650 Kg 1780 Kg 1825 Kg Without parallelogram 1000 Kg 1550 Kg 1525 Kg At3 m height With parallelogram 1400 Kg 1650 Kg 1780 Kg 1825 Kg Without parallelogram 1030 Kg 1500 Kg 1500 Kg At maximum height With parallelogram 1400 Kg 1650 Kg 1780 Kg 1825 Kg Specifications measured at 190 bar and a flow rate of 60 l min Indicated data are with a loose material bucket Values at ground level and at implement pivot are not considered to be working data Data varies depending on the type of tractor used NMDC ZH 19 rue de Rennes BP 83221 F 35690 ACIGN 23 Modification reserved DECLARATION OF CONFORMITY CE We the manufacturers MX 19 Rue de Rennes F 35690 Acigne Declare that the products MX U6 MX U8 MX U10 MX
6. MX ZH 19 rue de Rennes BP 83221 F 35690 ACIGN 19 Modification reserved Check the following each month and more frequently when used intensively Condition of the loader articulations If necessary replace the wear bushes and or the pins The wear bushes must be replaced if they are less than 1 mm thick The tractor s hydraulic oil level and the sealing of the hydraulic system If you notice any internal or external leaks on the hydraulic parts rams hoses connectors Mach couplings etc contact your dealer Condition of the hoses replace them if you notice any small cracks or oil seepage Correct operation of the monolever cables play locking etc Condition of the electric wiring Please contact your dealer if there is any damage to connectors or cables Mechanical condition any cracking deformation fretting on stops play parking stands etc Please contact your dealer if there is any abnormal wear Check the tightness of the bracket after 10 50 hours then every 100 hours or when carring out tractor maintenance In case of untightness please contact your dealer IMPORTANT All the screws needing to be retightened must be inspected changed if necessary cleaned and smeared with loctite Tighten the screws to the tightening torque specified in the table below Use of a pneumatic spanner to tighten the screws on the tractor is forbidden Tightening torque Nm 8 8 10 9 12 9 M8
7. U12 loaders Comply with standard EN 12525 and its amendments A1 and A2 which presupposes compliance with the requirements of directive 2006 42 EC of the European Parliament and of the Council of 17 May 2006 on machinery Acigne the 30th of March 2011 ZZ Loic Mailleux Technical Manager MX 7 19 rue de Rennes BP 83221 F 35690 ACIGNE T l 33 0 2 99 62 52 60 Fax 33 0 2 99 62 50 22 e mail contact m x eu
8. am R H side in the upper part 6 5 Checking before work Press on the ground with an implement to check if loader is correctly hitched on the tractor Use D A mode Difficult hitching 1 Connect the hydraulic s and electric s 2 Operate in single acting mode Moving the tractor forward amp If necessary turn the wheels 3 Operate lifting movement slightly The loader is locked Indicators in the green 4 Fold the parking stands away see 86 4 5 Checking before work see 86 5 YY 19 rue de Rennes BP 83221 F 35690 ACIGN 13 Modification reserved 7 IMPLEMENT UNHITCHING MA Caution This operation must be carried out by the driver who must leave the seat and ensure all manoeuvres are forbidden while he is working on the loader 7 1 Implement carrier with manual unlocking 7 1 1 Before leaving the operator s seat Select a stable parking area Lower the implement horizontally to 0 30 m from the ground Pull on the handbrake Turn off the engine Decompress the loaders hydraulic lines feeding the implement When loader fitted with one or several solenoid valves leave contact on and move the lever Left Right while pressing the buttons 7 1 2 Implement unhitching From the L H side of the loader pull on the lever to the end Never operate from the front of the implement MM Y 19 rue de Rennes BP 83221 F 35690 ACIGN 14 Modification reserved Then
9. move the lever backwards to lock it compressed springs 7 1 3 Disconnect the hydraulic s MACH 2 disconnect Couplings disconnect and place plastic caps on the male and female couplings Place the hoses on the front of the implement 7 2 FAST LOCK implement frame carrier Raise the loader to lift the implement off the ground With the implement horizontal press the green and orange buttons while moving the crowd lever to the right dumping The implement is now unlocked Place the implement on the ground by slightly tipping it to free the implement carrier from the implement NOTE If the implement has one or more hydraulic functions firstly disconnect the hoses See 7 1 3 8 IMPLEMENT HITCHING N Caution This operation must be carried out by the driver who must leave the seat and ensure all manoeuvres are forbidden while he is working on the loader oo ee Wu 8 1 Implement carrier with manual unlocking 1 am AXI 8 1 1 Check the unlocking lever is in the hitching position lever MX turned backwards Locking pins are retracted springs are compressed CAUTION checkimplementhoses are away fromhitching area MISC x e 19 rue de Rennes BP 83221 F 35690 ACIGN 15 Modification reserved 8 1 2 Approachthe loadertowards the implement Slotthe self centering V onto the implement s hitching brackets Crowd the implement back while driving forwards until the unlocking lever is
10. oeuvre can be avoided The MX joystick can be locked See diagram PROPILOT FLEXPILOT TECHPILOT 15 2 2 Lifting crowding movements MM Y 19 rue de Rennes BP 83221 F 35690 ACIGN 21 Modification reserved 15 2 3 Other movements PROPILOT FLEXPILOT 3rd function Green button Crowding gt an A Rd 3 e E ACS Implement return to dig Flexpilot only lt Black button NIS Ath function SCS Blue button Crowding FAST LOCK Implement hydraulic locking unlocking Green Orange buttons Crowding RE ELLE EEE Implement automatic locking unlocking including hydraulic and electric connections Green Orange buttons Crowding TECHPILOT Please refer to Techpilot instruction book MM Y 19 rue de Rennes BP 83221 F 35690 ACIGN 22 Modification reserved 16 TECHNICAL SPECIFICATIONS MX U6 MX U8 MX U10 MX U12 Length A 2 30 m 2 40 m 2 50m 2 60 m Width B 1 18 m 1 18 m 1 18 m 1 18 m Without parallelogram 1 72m 1 77 m 1 83m Height C With parallelogram 1 84 m 1 88 m 1 94 m 1 98 m Without parallelogram 405 Kg 430 Kg 545 Kg Weight without option With parallelogram 435 Kg 460 Kg 570 Kg 595 Kg Maximum height at implement pivot 3 75 m 3
11. option Without With SHOCK ELIMINATOR SHOCK ELIMINATOR 12 SAFETY DEVICE ON LIFTING CROWDING If the loaders lifting operation requires people to be in the close proximity the hydraulic circuit of the loader must have safety device fitted to it This in accordance with the standard EN 12525 A1 from July 2006 depending on equipment 13 MAINTENANCE A Caution Change the tractor hydraulic oil and filters regularly in accordance with the tractor manufacturer recommendations Used oil does not lubricate it also contributes to the damage of all hydraulic components pump valves rams Even clear oil may not lubricate For any maintenance operations made whilst the loader is the raised position the loader must be locked into position Two possibilities Lock the joystick in the cab see chapter 19 Control or Disconnection of the MACH System if loader has one or closing the tap fitted on the lifting coupler if the loader is without MACH System see chapter 5 Loader unhitching When using a high presssure cleaner do not direct water towards the electrical components Clean the implement and the loader front after each use The acid from slurry fertilisers and silage is harmful to paint steel and the machine s pivot points Grease every 10 hours and after each wash grease eliminates water and particularly after washing with a high pressure cleaner
12. s Tiltthe hitch shoes downwards Ensure that the hitch shoes are kept in position by the spring rods Putthe pins back to their initial position Modification reserved MM Y 19 rue de Rennes BP 83221 F 35690 ACIGN 17 9 4 Euro SMS AL S3 implement carrier frame To switch from the SMS or ALO3 position to the Euro position Remove the split pins then the pins Take the RH hitch shoe and position it on the left by rotating it through 180 Proceed in the same manner for the LH hitch shoe 9 5 MX Master Attach Faucheux Blanc implement carrier frame To switch from the MX Master Attach position to the Faucheux Blanc position Remove the hitch shoes from their storage position Fittheminthehitching positionandaddthe 4 attachment pins Fitthe lynch pins to the attachment pins 10 IMPLEMENT LEVEL INDICATOR The implement level indicator is useful for implement repositioning Efficient even while lowering the loader it is adjustable according to the implement type Implement in position MX Y 19 rue de Rennes BP 83221 F 35690 ACIGN 18 Modification reserved 11 SHOCK ELIMINATOR SYSTEM Shocks are eliminated when moving the loader or when it stops suddenly when being lowered Thissystemsoftensjoltingonthetractorandtherefore jarring in the cab The Shock Eliminator can be enabled or disabled directly from the cab electric isolation
13. spare parts Do not modify your MX loader or its accessories yourself or have another person modify them mechanical electrical hydraulic pneumatic characteristics without prior written agreement from MX Failure to respect these regulations may make the loader dangerous MX will disclaim all responsibility in the event of damage or injury The guarantee is immediately invalid when the instructions for use and the MX loader maintenance schedule outlined in User Manual are not observed MX Y 19 rue de Rennes BP 83221 F 35690 ACIGN 6 Modification reserved 2 SAFETY STICKERS Security stickers are located on the loader Keep them readable and clean and change them if damaged 3 IDENTIFICATION PLATE The identification plate is located inside the LH arm C The serial number and loader type which are indicated on mind stes ore AC CNE this plate might be requested when requiring spare parts or D signation Designation technical assistance Type Model Typ N de s rie Seriennummer Apnea Year Poids a vide k Unloaded weight Leergewicht g 328462 NE 19 rue de Rennes BP 83221 F 35690 ACIGN 7 Modification reserved 4 COUNTERWEIGHT The stability ofthe tractor and loader can only be ensured with a counterweightonthe rear of the tractor This counterweight must ensure that a minimun of 20 of the total weight Trac
14. sun and will ensure the hitching is correct 5 3 Pull the parking brake Turn off the engine 5 4 Get out of the tractor 5 5 Lower the L H side Fitlock frame handle until it is locked inside the frame notch 5 6 Fitthe left and right parking stands Open stands covers Pull the stands out and place them in designated position under the loader jib by pulling up the locking pins N B A gab 10 to 30 mm should remain between the stand and the ground Adjust the stand s length if necessary 10 30 mm MX 19 rue de Rennes BP 83221 F 35690 ACIGN 9 Modification reserved 5 7 Disconnect the hydraulic s and electric s 5 7 1 Loader with MACH System Helease the MACH System housing by pushing the locking pin on the LH side and lifting the handle up Hook the MACH System on the support 5 7 2 Loader without MACH System Close the tap and disconnect the couplings Position the protective covers clean to the male and female couplings Store the hoses on the loader MM Y 19 rue de Rennes BP 83221 F 35690 ACIGN 10 x 4 P ipse Pr Modification reserved 5 8 Lower the R H side Fitlock frame handle until it is locked in the frame s notch 5 9 Get back into the tractor Check that the locking indicators are in the red area Unlocked position 5 10 Reverse the tractor first with a rapid movement then more slowly until the loader rests on its stands
15. tor loader implement maximum load and counterweight is applied on the back axle of the tractor in order to work in a safe condition Below is the calculation method which indicates the required counterweight M 5Nb 12 P N 5G 5 11 12 12 G Weight on the rear axle wihtout counterweight with an empty implement kg G1 Weight on the front axle without counterweight with an empty implement kg b Distance from the front axle to the implement centre of gravity mm I1 Distance from rear linkage pins to the rear axle mm 12 Wheelbase N Loader payload at 2 m Kg P G G1 kg M Weight of the counterweight kg MM Y 19 rue de Rennes BP 83221 F 35690 ACIGN 8 Modification reserved 5 LOAD E R U N H ITCH N G i You will also find a video showing the unhitching hitching on www m x eu AN Caution This operation must be carried out by the driver who must leave the seat and ensure all manoeuvres are forbidden while he is working on the loader The loader must always be coupled to an implement to unhitch it 5 1 Choose a flat and stable area 5 2 Lower the loader with double acting in order to slightly lift the front axle of the tractor with the implement horizontal to the ground Operate in single acting mode then back to neutral The lift rams will be filled both sides with oil and involuntary movements of the loader will be limited when the loader has prolonged exposure to the
16. triggered 8 1 3 Turn the engine off Decompress the loaders hydraulic lines feeding the implement N B If the loader is fitted with a solenoid valve decompress with contact turned on and the control button pressed 8 1 4 Connect the couplers when implement with hydraulic functions 8 2 FAST LOCK implement frame carrier Before attaching the implement ensure that the locks are in the open position to allow the implement s parts to pass Move the loader along the axis of the implement drive the implement carrier into the implement gently crowd and raise the loader to lift the implement from the ground Press the green and orange buttons by moving the crowd lever to the left crowd The implement is now locked NOTE If the implement has one or more hydraulic functions connect the hoses See 8 8 1 4 A N checking before work Press on the ground to check if implement is correctly locked on the loader Use D A mode Manoeuver each hydraulic service to its maximum in each direction to check the correct operation ofthe hydraulic system and that there are no leaks MX Y 19 rue de Rennes BP 83221 F 35690 ACIGN 16 Modification reserved 9 IMPLEMENT CARRIER FRAME MODELS 9 1 MX Master Attach implement carrier frame 9 2 Euro implement carrier frame 9 3 MX Master Attach Euro implement carrier frame To switch from the MX Master Attach position to the Euro position Remove the pin
17. ture FOPS This should be in the protective position when using the loader Watch out for overhead electrical and telephone cables when manoeuvring with the loader in the raised position n compliance with the standard EN 12525 the controls for operating the loader and implements must be of the sustained action type with the exception of the lift floating position which can be maintained in its position by a notching system Any activity relating to defect investigation diagnosis and ordisassembly of parts may only be undertaken by an accredited professional who shall assure his safety and the protection of the environment in which the actvity is conducted in particular in the event of an activity involving the loader staying in the lifted position AN CAUTION The loaders hydraulic circuit is designed to have a maximum service pressure of 200 bar Never modify hose connections The breaking of the seals will result in the cancellation of the MX responsibility for all the equipment supplied The assembly of an MX loader which excludes the recommendations in the MX price list in force at the purchase date cancels the MX guarantee on all the equipment supplied Any modification to a section of any MX equipment implements loader bracket etc orthe use of an implement or element installed on the MX loader of foreign origin cancels the MX guarantee for all equipment supplied Use only MX original
Download Pdf Manuals
Related Search