Home

User Manual - Intellihome

image

Contents

1. _ __4 _ 0 __ _4 Figure 4 62 Record frame There are six frame selections such as 1 30 4 30 8 30 15 30 24 30 30 30 Recommended default is 4 30 The greater the Frame rate is the sharper picture quality is and the greater of storage space is the shorter the storage time is Record full strategy When the SD card is full you can choose to cover the previous recording or stop recording Audio Record You can choose yes or no NOTES e Scheduled recording only supports video saved to the SD card or FTP server The schedule recording will stop while alarm recording is beginning and it will continue automatically after alarm recording end e You can refer to alarm schedule in Alarm about editing the time of recording Schedule 4 7 5 SD Card Management FI9803EP FI9900P FI9900EP The SD card Slot inside the camera if you want to install or remove the SD card you need to open the camera When you plug in the SD card during the camera work process please reboot the camera again or else the SD Card may be cannot work well Go to the Settings gt Status gt Device Status page you can see the SD card status 67 www foscam com Alarm Status Disabled Record Status Not Recording See C Figure 4 63 The default storage path of alarm record files is SD card when the available size of SD card is less than 256M the old record files will be de
2. 4 3 4 Multi Camera If you want to view multi surveillance screens on one window you need to login one camera and set it as the main device and do Multi Device Settings add other cameras to the first one camera Before you do multi cams settings you need to assign different port such as 81 82 83 84 85 86 87 88 to the cameras if there is 8 cams installed The firmware within the camera can support a maximum of 9 devices monitoring all at the same time This page you can both add FOSCAM MJPEG and H 264 series cameras to the first camera and view multi surveillance screen on one window Add cameras in LAN In Multi Device Settings page you can see all devices searched in LAN The 1st Device is the default one You can add more cameras in the list in LAN for monitoring The camera s software supports up to 9 IP Cameras online simultaneously Click The 2nd Device and click the item in the Device List in LAN the Alias Host and Http Port will be filled in the boxes below automatically Enter the correct username and password then click Add Add more cameras in the same way 36 www foscam com Multi Camera FI9821P 172 16 0 94 A AA O0 LAN 1111 172 16 1 71 a l anonymous 172 16 0 179 LAC De UE o m ze j Col Teoma mci en None 1 Click it camera model alias DA host and HTTP Port will be Camera Name anonymous filled in the following boxes 1 automatically Camera Model m E IDA bs
3. 3 Click Add to take effect Figure 4 12 Camera Model Our Company produces two series cameras MJPEG and H 264 Here will show you which series the camera belongs to anonymous 192 168 11 193 AAA abu jer EZ ust 11 241 ENEE TOS 168 11 TE C e Cameras On LAN m m Note If you want to access your camera remotely make sure you are able to access it seperately through a browser Figure 4 13 Back to Surveillance Windows and click Four Windows option you will see four cameras you added Shenzhen Foscam Intelligent Technology Co Limited Tel 86 755 2674 5668 Fax 86 755 2674 5168 OSCAM o Lvevideo CH Settings Outdoor Waterproof IP Camera Outdoor Mode STEAM HD Mode 720P 3C y Mirror CI Flip Cruisa IR LED Lights Color Adjustment Ouldoor Mode Ed HD Mode 720 30 Color Adjustment Figure 4 15 Add cameras in WAN If you want to view all cameras via the internet remote computer you will need to add them using DDNS domain name Firstly make sure all of the cameras you added can be accessed through the internet Read How to configure DDNS settings in chapter 4 4 4 Login to the first camera using a DDNS domain name and port 38 Ena Aan La Peverstes we Seggested Dte Cope PMulba E SSereceweay Outdoor Waterproof IP Camera i Device status Dever into Refresh Servon status Log Alarm status No samm 1 Base Serra Record
4. Interface One audio input jack One audio output jack Reset Buttons 88 I O alarm interface External Input output terminal block one RS 485 port support of transparent channel Control Interface transmission PoE Standard IEEE 802 3af Input Voltage DC 36V DC 57V Output Voltage DC 12V 2 0A Output Power 15 4W Max Wiring standards 100M BASE T Operate Temper 20 C 60 C 4 F 140 F Operate Humidity 20 85 non condensing Storage Temper 20 C 60 C 4 F 140 F Environment Storage Humidity 0 90 non condensing Dimension 245 L X196 W X112 H mm Net Weight 900g Gross Weight 1150g CPU 2 0GHZ or above suggested 3 0GHz Memory Size 256MB or above suggested 1 0GHz 64M or above Microsoft Windows 2000 XP Vista 7 Display Card PC Mac OS IOS Android IE8 and above version or compatible browser Firefox Requirements Supported OS Browser Chrome Safari or other standard browsers Upgrade Upgrade from network Certification CE FCC RoHS Limited 2 year warranty ITEMS FI9900P Sensor High Definition Color CMOS Sensor Image Sensor AS Lens Angle of view Horizontal 96 Diagonal 102 Image Compression H 264 Image Frame Rate 30fps 60HZ 25fps 50Hz downward adjustable Video 1080P 1920x1080 720P 1280 x 720 VGA 640 x 480 QVGA 320 x 240 Resolution 89 The hue brightness contrast saturation sharpness are adjustable IEEE802 11b g n IEEE802 11b 11Mbps Ma
5. DDNS successfully but you want to use Manufacturer s DDNS again here click this button and start Manufacturer s DDNS Service Third Party Domain Name Settings User can also use third part DDNS such as www no ip com www 3322 com Here take www no ip com for example 1 Step 1 Go to the website www no ip com to create a free hostname Firstly Login on www no ip com and click No IP Free to register ETLE TO 1e EDIN N Easy to use interface FREE dynamic DNS update client Download Services Complete control over your domain Includes 50 hosts sub domains Sign Up More Info POP3 IMAP Mail Feature Highlight reate a FREE hostname to point A i y a ES Packages including 100MB to 2GB See what over 12 million users are talking about Try us for FREE Outsource your mail service egister advanced spam and virus filtering v Search 4 Configure your Our DDNS is included in many hardware routers We ll help you get started As low as 19 95 per year Learn More gt Learn More gt Learn More gt Figure 4 26 router to work with gA No IP com Bf 4 Support Company User Login Login Additional Services Ww Upgrade your No IP account to unlock many features we Maximize uptime and add to your existing DNS infrastructure A server monitoring including automatic failover Run a mail server even if your ISP blocks Stay Connected Wit
6. FCC IC CE WEEE IP66 Warranty Limited 2 year warranty Operating Temperature 10 C 60 C 14 F 140 F Operating Humidity 10 80 non condensing ITEMS FI9800P Image Sensor sensor High Definition Color CMOS Sensor Display Resolution 1080 x 720 1 0M Pixels Min Illumination O Lux With IR Illuminator Lens Type Glass Lens focal length Lens Aperture Angle of View f 2 8mm F1 2 Horizontal 70 Diagonal 75 Image Compression H 264 Image Frame Rate 30fps 60HZ 25fps 50HZ downward adjustable Resolution 720P 1280 x 720 VGA 640 x 480 QVGA 320 x 240 Stream dual stream Video Image adjustment The hue brightness contrast saturation sharpness are adjustable Flip image flip and mirror Infrared mode Automatic or manual Night visibility With 30pcs IR LED Night Vision Range up to 20m External RCA interface for two way audio PCM G 726 One 10 100Mbps RJ45 port IEEE 802 11b g n IEEE802 11b 11Mbps Max IEEE802 11g 54Mbps Max Input Output Audio Compression Ethernet Wireless Standard Data Rate IEEE802 11n 150Mbps Max Wireless Security WEP WPA WPA2 Remote Access P2P DDNS Network Protocol IP TCP UDP HTTP HTTPS SMTP FTP DHCP DDNS UPnP RTSP ONVIF Operating System Microsoft Windows 2000 XP Vista 7 8 Mac OS System Browser Microsoft IE8 and above version or compatible browser Requirements Mozilla Firefox Google Chrome 92 Apple Safari me AA Dim
7. Front Panel for FI9804W FI9805W FI9805E Figure 1 1 1 WIFI Antenna Wireless Antenna FI9804W FI9805W 2 Infrared LED 12 IR LEDs FI9804W 36 IR LEDs FI9805W FI9805E 3 LENS CMOS sensor with fixed focus lens 4 Induction IC Front Panel for FI9803EP FI9803P www foscam com Figure 1 2 1 WIFI Antenna Wireless Antenna FI9803P 2 Infrared Lamp Array 3 LENS CMOS sensor with fixed focus lens 4 Induction IC Front Panel for FI9903P Figure 1 3 1 LENS CMOS sensor with fixed focus lens 2 Infrared Lamp Array 3 Induction IC Front Panel for FI9900P FI9900EP FI9800P Shenzhen Foscam Intelligent Technology Co Limited Tel 86 755 2674 5668 Fax 86 755 2674 5168 www foscam com 1 WIFI Antenna Wireless Antenna FI9900P FI9800P 2 Infrared LED 30 IR LEDs 3 LENS CMOS sensor 4 Induction IC 1 5 2 Interface Figure 1 4 1 I O alarm terminal block This network camera provides a I O alarm terminal block which is used to connect to external input output device The pin there are four number in the terminal block from no 1 to no 4 definitions are as follows Shenzhen Foscam Intelligent Technology Co Limited Tel 86 755 2674 5668 Fax 86 755 2674 5168 1 input 2 input 3 output 4 output Figure 1 5 This camera supports I O alarm you can go to Settings Alarm I O page to configure it NOTE Only FI9805E has this section 2 LAN 10 100M adaptive Ethernet interface Throu
8. Run as administrator 6 1 6 No Pictures Problems The video streaming is transmitted by the ActiveX controller If ActiveX controller isn t installed correctly you will see no video image You can resolve this problem by this way Download ActiveX controller and set the safety property of IE in the PC when you view it first time IE 80 browser Tool Internet Proper Security Custom Level ActiveX control and Plug ins Three options of front should be set to be Enable The ActiveX programs read by the computer will be stored As follows Enable Download unsigned ActiveX controls Enable Initialize and script ActiveX controls not marked as safe Enable Run ActiveX controls and plug ins internet iptions El x Genera Security Privacy Conterk Connections Programs Adverned Select a pone bo Mew oe change security settings Sd a y l Soi urity Settines internet Zone gt Interret Local intranet Trusted ates Res Disable C Enable y Download sgned Actives cortrols not secure C Cisable Enable not secure C Prompt recommended Download unsigned ActweX controls not secure C Disable recommended Internet This cone is for Inhenet webstes mecept those listed in trusted and resticted 70nes la Securky evel For this zone Alowed levels for this zone Medium to Hoh a medium high Enable net secure Appropriate for most w
9. Video gt Snapshot Settings Recording Please set the video storage location in advance Record gt Storage Location IO Output Clear lO Alarm Output 2 Schedule MN PRL ee Se ee A ee A A A e A de O e A 46 _4 A __ 4 ms y dd gt 2 2 2 __ 4 _ dd _4 _ y 2 __ 46 _4 _ __ 2 1 gt 2 y _ _ 1 _ 2 2 _ 4 e 2 dd _4 _ 4__ MON 24 4 4 4 4 4 4 _ 2 4 8 ez 4 4 4 4 4 4 4 e 4 2 0 22 4 2 8 2 4 2 4 24 24 8 2 dd 4 Figure 4 54 There is an lO alarm input output lines in the FOSCAM camera tails Enable IO alarm need this cable to connect to the alarm device door sensor infrared sensor smoke detector etc I O Alarm has four ports eo Port 1 and port 2 indicate lO alarm input e Port 3 and port 4 indicate lO alarm output Figure 4 55 63 Setting lO alarm On the lO page Enable the I O alarm select the Send E mail and Snapshot before you have configured the mail and FTP If an lO alarm is triggered and lO alarm output device will always alarm sound alarm is issued a warning sound alarm lights in flash etc Click Clear IO alarm output the alarm output device will stop alarming If IO alarm is triggered again after alarm interval IO alarm output device will be restart Note motion detection alarm can also be triggered lO alarm output 4 7 Record 4 7 1 Storage Location Storage Location
10. and device name on the video Basic Settings pecados Network Save Refresh L Video Display Timestamp Yes x Video Settings on Srs gt Display Camera Name Yes v Privacy Zone Snapshot Settings IR LED Schedule Figure 4 42 Display Timestamp There are two options Yes or NO Select Yes and you can see the system date on the video Display Camera Name There are two options Yes or NO Select Yes and you can see the device name on the video 4 5 3 Privacy Zone Some models do not support this Function This page is used to add privacy zone on the video Status Basic Settings Network z Save Refresh Video Allow Privacy Zone Yes v Video Settings Set Privacy Zone On Screen Display Snapshot Settings IR LED Schedule Figure 4 43 Allow On Screen Display Mask There are two options Yes or NO Select yes and draw a mask area on the video the mask area will be black on the video 55 ok Privacy Zone 2013 10 22 10 23 35 anonymous The privacy zone Figure 4 44 Click OK button and return to the Privacy Zone page click Save to take effect Back to the surveillance window you can see the privacy area as the following picture FOSCAM O veviseo Of setings Outdoor Waterproof 1P Camera Outdoor Mode Y 0 720P 30fps 2M Y Figure 4 45 4 5 4 Snapshot Settings On this page you can set the snapshot pictures image quality and the storage
11. firmware and are not eligible for warranty or technical services 1 6 SD Card Management FI9803EP FI9900P FI9900EP The record files of the IPC can be stored in the SD Card You need open the IP Camera then plug the SD card into SD card slot inside the IP Camera When you plug in the SD card during the camera work process please reboot the camera again or else the SD Card may be cannot work well Insert Micro SD Card in the location shown below Ss Micro SD Card Slot a Note When you re install the camera please ensure the tightness with the camera 10 1 7 Wall installation o retin A EM gt TF FOSCAM V SSS o V Pi ae Step 1 Screw the mount on the wall with the 3 screws provided Step 2 Install the camera on the mounting bracket with 1 screw to complete installation NOTE Ensure that the rain or water will not reach the connector ports at the end of the pig tail wiring These connectors are not weather resistant 1 8 The different features between the models involved Differences PoE Power over Alarm in out Audio input output RS 485 Ethernet Few v x a E D E rese x tert L x FIBBOSEP x Jooo Y poo s Y Fisose Y xx po oyo px Y METIO E s O E O y Fig0P Y ooo Yoo pr Y FI9900EP s Fe Fiss00P Y xx o ox o poo Yo x Y L x L 2 L 11 2 Access the IP Camera 2 1 Hard
12. foscam com old password and the new password lastly click modify to take effect User Accounts Confirm the password Privilege C Change username Y Change password _Modiy_ The maximum username length is 20 including numbers letters and symbols _ The maximum password length is 12 including numbers letters and symbols _ lt gt Figure 4 9 How to add account Select one blank column then enter the new user name password and privilege last click Add to take effect You can see the new added account on the Account list User Accounts voe MA I Change username Fie ange password The maximum username length is 20 including numbers letters and symbols _ The maximum password length is 12 including numbers letters and symbols 10 _ lt gt 1 Figure 4 10 Shenzhen Foscam Intelligent Technology Co Limited Tel 86 755 2674 5668 Fax 86 755 2674 5168 User Accounts Refresh _ Change username Change password The maximum username length is 20 including numbers letters and symbols _ The maximum password length is 12 including numbers letters and symbols _ 1 lt gt 9 1 Figure 4 11 Delete Select the account which you want to delete then click Delete button to take effect NOTE The default administrator account cannot be deleted but you can add other administrator users
13. fps You should lower frame rate when the bandwidth is limited Normally when the frame rate above 15 you can achieve fluently video The maximum frame rate for each model is different please see the Specifications 4 Bit rate Generally speaking the larger the bit rate is the clearer video will become But the bit rate configuration should combine well with the network bandwidth When the bandwidth is very narrow and bit rate is large that will lead to video cannot play well You can reset the stream type on Settings gt Video gt Video Settings panel 25 www foscam com Video Settings Enhanced Night Vision Definition z Figure 3 10 HDR Only FI9900P FI9900EP HDR stands for High Dynamic Range It usually refers to the method of capturing images having greater dynamic range between the lightest and darkest areas of an image than current standard digital imaging methods or photographic methods You can select on from the dropdown list under sunlight or with bright background Zoom in or Zoom out FI9900P FI9900EP Device Support 8x zoom feature click or The focal length of the camera lens will be larger or shrink you can adjust the focus distance to the target object size access to high definition screen Section4 Pan Tilt Control only F9805E When via RS485 interface to connect an external PTZ device you can use this feature Shenzhen Foscam Intelligent Technology
14. ky 45 Please register an account step by step according to instructions on Www no ip com After registration please login your email which used to register You will receive an email from website please click the link to activate your ACCOUNT as indicated in email Secondly Login the link with the registered username and password to create your domain name Download Services Support Company User Login Client Login Login with the registerec username and password Home Client Login Login Additional Services y Email Upgrade your No P account to unlock many Password features e Forget your password No problem Click Here Maximize uptime and add to your existing fyou are not currently a registered user of No IP com DNS infrastructure and would like to be for FREE register as a new user Figure 4 27 Hosts Redirects DNS Hosting Domain Registration Mail SSL Certificates Monitoring Backup DNS Renew Activate id 2 Your No IP Y for your mail server Click here for more info Cuixiang welcome to your No IP Last Login 2012 04 04 21 40 56 PDT from IP 65 49 14 58 You have successfully logged into No IP s member section To start using No IP s services select an icon below or choose 8 24 7 Server Monitoring an item from the navigation above and Failover 2 Need Help Support Center Basic Troubleshooting Manage Domains Add Domain Refer Friend Add a Host Guide Suppor
15. means during Tuesday whole day when something moving in the detection area the camera will alarm 60 www foscam com 00 01 02 03 04 05 06 O7 08 09 10 11 12 13 14 15 16 17 18 19 20 21 22 23 Tue sett at et er AM W a en H oe eee rmi EO iw iM iM it i i amp ES AN an MD On In dm Am dmi Ini CAME IMi R E ff tt th i i i ii tl tl ti ii IE Figure 4 51 3 Press the left mouse and drag it on the time boxes you can select the serial area e qa un ii i 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 16 17 18 19 20 21 22 23 1 ee En LS oe eee AS Penni in int nh mn i i A H HEH E Ee Tt ht i il it ii EE EE Em am Im Im Teen Tee cae BE a ce u e o a iH Hh it i csv a a a O OT O con W HHH A a l a O ti i i iH i When the PC sound alarm is enabled the PC will make a sound only in Live Video page while the IPC detected an alarm Figure 4 52 7 Click Save button to take effect When the motion is detected during the detection time in the detection area the camera will alarm and adopt the corresponding alarm indicators NOTE You must set the detection area and detection schedule or else there is no alarm anywhere and anytime 4 6 2 Sound Detection Some models support Sound alarm When the ambient sound over a certain decibel the sound alarm will be triggered Shenzhen Foscam Intelligent Technology Co Limited Tel 86 755 2674 5
16. ocoooonconccnnnnnanacananononanananonoconannnannnocononnnnnnnnccononancnnnncronannoss 82 62 Default arameo la ii 82 www foscam com oro gre 9121011 o e PO E O nee eee ae eee re 82 ACE Cp Ud A didas 93 E A O Pe ne eT E T E 94 TObtamie Technical SUPPO TM A E 97 Shenzhen Foscam Intelligent Technology Co Limited Tel 86 755 2674 5668 Fax 86 755 2674 5168 Security Warning 1 Foscam cameras and NVRs require good security practices to safeguard your privacy You should regularly change your camera or NVR password which is 8 10 numbers letters symbols combination 2 You should update your camera or NVR regularly Make sure your camera or NVR has the latest firmware installed for your specific model and better experience 1 Overviews FOSCAM Outdoor HD IP Camera is an integrated wireless IP Camera with a color CMOS sensor enabling viewing in High Definition resolution It combines a high quality digital video camera with a powerful web server to bring clear video to your desktop from anywhere on your local network or over the Internet The IP Camera supports the industry standard H 264 compression technology drastically reducing file sizes and conserving valuable network bandwidth The IP Camera is based on the TCP IP standard There is a WEB server inside which could support Internet Explorer Therefore the management and maintenance of your device is simplified by using the network to achieve the remote configuration and st
17. well with the network bandwidth When the bandwidth is very narrow and bit rate is large that will lead to video can not play well Frame Rate Note that a larger frame size takes up more bandwidth You should lower frame rate when the bandwidth is limited Normally when the frame rate above 15 you can achieve fluently video The maximum frame rate for each model is different please see the Specifications Key Frame Interval The time between last key frame and next key frame The shorter the duration the more likely you will get a better video quality but at the cost of higher network bandwidth consumption Variable bitrate except for FI9900P FI9900EP Select the Bit rate type to constant or variable If select Yes the camera will change the video bit rate according to the situation but will not more than the maximum parameter Bit Rate If select No the Bit Rate is unchanged Rate Control Mode FI9900P FI9900EP There are three rate control modes CBR Constant Bit Rate it means that the Bit Rate is constant 54 VBR Variable Bit Rate the camera will change the video bit rate according to the situation but will not more than the maximum parameter Bit Rate LBR Low Bit Rate If you can select the LBR then you can slide the scroll bar to choose percentage of the bit rate By reducing the bit rate so that the camera can obtain a better image at low bandwidth 4 5 2 On Screen Display This page is used to add timestamp
18. 1 If you don t know the DNS server you can use the same settings as the Default Gateway 4 4 2 Wireless Settings FI9803P FI9804W FI9805W FI9900P FI9800P Step 1 Choose Settings on the top of the camera interface and go to the Network panel on the left side of the screen then click Wireless Settings Click the Scan button and the camera will detect all wireless networks around the area lt should also display your router in the list Shenzhen Foscam Intelligent Technology Co Limited Tel 86 755 2674 5668 Fax 86 755 2674 5168 Save Refresh SsiD Wireless Network List Encryption None v solD Network Name Encryption Quality Net HkWWc WPA p Click the Scan button to search for wireless airNET free Unencrypt 4 ds sa networks wingate WPA2 w CPA1 WPA MERCURY _MYV150R WPA it Y CPA2 WPA foscam WEP at uni tab WPA2 afl foscam wifl WPAZ oft cisco WPAZ2 md Click the Page number to see other wireless networks devices if there are more than 10 Figure 4 22 Step 2 Click the SSID name of your router in the list the corresponding information related to your network such as the name and the encryption will be filled into the relevant fields automatically You will only need to fill in the password of your network Make sure that the SSID Encryption and the password you filled in are exactly the same for your router Save Refresh SSID cisco Wireless Network List Encryptio
19. 15 ZAVNO NE VES Pa VO A a 18 2 5 IP camera connection to the ServVerT ooooo occcccononocaccconononananonocononannnnnoconoonananononononnnannnnnronnnnnnnnnnononannn nn nnrcnnann nono 20 3 SURV CHIANG SOT ANS SU ati AS A A A AAA Recenidadderant 21 SECA VINO Wa ii ANA dit 21 SIE MACS VINO Wi E E di 24 4 Advanced Camera SCUINGS iii SAA A aint Aes 31 ASUMA 31 LND MC AU sii doi ios 31 4 21 AIO VICES IO AO Ni AiO 31 AZ 2 DEVICE SUS ii E A A A S 32 AS SS IOMA nai la 32 E raii a ban Dia a S N 32 7 Ao BASE o CUNS pear een mm we OS nt ER T ia 33 435 1 Camera Names ii A ini baaie asset 33 AA A A A II E 33 HOUSE ACCUMS aiii licor 34 iS MUS AMECA a cio 36 FA NEWO aia A aisla 40 AA As AAA E a e AA 40 4 4 2 Wireless Settings FI9803P FI9804W FI9805W FI9900P FTO8SO00P ooooncoccccccccnonooncnccccnonannananonononnnos 42 A 0 A ccna ta Pest noel sea es E R ea ee 44 AA DON Sid a 44 AO EE eee A A a 48 AA O PO AA AAA da 48 4 ES NN 50 AAG FTP AA A A A MEA 32 4 4 9 P2P FI9803P FI9803EP FI9903P FI9900P FI9900EP FTOBOOP oooccnococnncnononconononcncncnonanncnononannnnnnnnns 53 AO NOS A A usta madierea Go leetisae a a E E 53 71 Eo loo SEUNG ea te rE Co Re one N 53 45 Z OMS Creen DIS Sean nn ne A A RT A 55 Bes AE O 55 4 04 Snapshot SC MING Sinai be ddciasteneniaienteladnedacadassteanthes tate alain aaa 56 A ONS LED SOUS Ult di A AESA 58 O AA A A A A e 58 401 MOton Detecta 58 46 2 SOUNG Detecta do 61 ABS IO ALAM COL FIS ara A AS OA 6
20. 2 ET RECOU ian a a a Ses sett sulk os oi a iad atioedaen adres Beaten wt ew cd eed ste ndeasess 64 eT LO Age LOCA MON ara 64 ARA RECO li A A Oe ERE eT 65 SN Role A TO 65 41 4 Schedule Records lara id da idad 65 4 7 5 SD Card Management FI9803EP FI9900P FI9900EP ooooocnccccnonononacicononononancnonononanannnnnccnonnnancncccnnannnonos 67 AS PTZ O0V FIGSO Elina dia 68 o A ee EEA EE ONT TG ET Oe E cere ta aR Pee T 68 AS 2 69409 CONIGUIA IO Masia SA A ia 68 PO A A 69 ANOS VS Mr ad dinnedetadbh ches eterna chars eater ATE E Ria eica tiered aetna as 69 A ANOS AGC KAU Cer ROS LOLS up A N 70 4 10 2 System UPA dias 70 410 3 Pa ten stala OA A A 72 4104 Factory ReSEl orrena E ON E AAE N E 73 PMO ES A O Sea 73 5 Playdack ElI9SO3EP ElO900P ElLOO00E Plain di 74 CAPNERE oran rias OR ne 75 6 1 Frequently ASked QUESO Siuiiipiiipd6roen AA dda den wad Anions 75 6 1 1 Install the ActiveX of Firefox browser Google Chrome and IE Chrome ccccecccsccceeeesseeees 75 6 1 2 Uninstall the ActiveX of Firefox browser Google Chrome and IE Chrome 78 6 1 3 have forgotten the administrator pasSwWOrFO oooooocccccnncnocuccccononanancnonononnnannnonconnnnn ano noroononnnnnnnrccnnananonos 80 0 1 4 SUDNEL doesn IMAN id daa 80 615 Camera can NOL MOCOM Circa fered rind di A iii 80 S 10 INO Pictures PODEM S ivi AE AA 80 617 Cantaccess IP camera Meme naaa A iS 81 0 1590 UPA always Talaia a il 82 6 1 9 Camera can not connect Wireless
21. 55 2674 5168 Getting Started Documents Windows Media Center Pictures Calculator Music Sticky Notes Games Snipping Tool Computer Paint Control Panel bh Remote Desktop Connection Devices and Printers Magnifier Default Programs Foxmail Shortcut Help and Support Solitaire All Programs Figure 6 7 Adjust your computer s settings View by Category Y System and Security User Accounts and Family Safety Y 4 Review your computer s status W Add or remove user accounts z Back up your computer id A Set up parental controls for any user Find and fix problems a Appearance and Personalization Network and Internet ay Change the theme L View network status and tasks Change desktop background lt 2 Choose homegroup and sharing options Adjust screen resolution Hardware and Sound View devices and printers Add a device Programs Clock Language and Region Change keyboards or other input methods Change display language Ease of Access Let Windows suggest settings Optimize visual display Figure 6 8 79 e a 2 Control Panel Programs Programs and Features v Search Programs and Features Control Panel Home Uninstall or change a program View installed updates To uninstall a program select it from the list and then click Uninstall Change or Repair A Turn Windows features on or si Organize Uninstall e 12 Name Publisher Installed On Size Biz e
22. 668 Fax 86 755 2674 5168 www foscam com Send E mail Take Snapshot Time Interval Action Please set the capture storage location in advance Video gt Snapshot Settings Recording Please set the video storage location in advance Record gt Storage Location Figure 4 53 If the Sensitivity is set to High the camera will detect the sound whose more than 55db If the Sensitivity is set to Medium the camera will detect the sound whose more than 65db If the Sensitivity is set to Low the camera will detect the sound whose more than 75db If the Sensitivity is set to Lower the camera will detect the sound whose more than 85db If the Sensitivity is set to Lowest the camera will detect the sound whose more than 95db 4 6 3 IO Alarm only FI9805E This IP camera provides a lO alarm terminal block which is used to connect to external input output device The alarm device door sensor infrared sensor smoke detectors etc send input command to the network camera then the network camera send output command to the alarm output device local audible alarm lights Shenzhen Foscam Intelligent Technology Co Limited Tel 86 755 2674 5668 Fax 86 755 2674 5168 alarm etc IO COo Sme Rele Enable y Trigger level Low Ea Triggered Interval 5s 7 Camera Sound PC Sound Send E mail Take Snapshot Time Interval 25 Action Please set the capture storage location in advance
23. Address Lookup epee ae spp IP WHOIS Lookup 183 37 28 254 ion arar qe E 5 a few min then it is pamfully slow User Agent Info Whats My IP Time Warner cable is my service Lon iieaier turo Address ip confused beip me smart propie How To Change Your IP Our visitors need to know How To Trace An Email their IP address for many on m Pu peer dl What Is An IP Address reasons incuading gaming become really close to the point im IP Address Management tech support remote brought into their Efe s this is E di DUCE desktop commection proxy sweet DOS Windows IP anonymity or hy eee simply to see if their This is fairly complex but 1 wonder i bee emni address has changed if it s possible I was wondering ee iennen Vistors often come here there Was some way vou can hack to do an IP Address a nets minute we Figure 2 5 Access your IP Camera from the Internet You can access the IP Camera from the Internet remote access Enter the WAN IP address and port number in your standard browser For example you would enter http 183 37 28 254 88 2 3 2 Remote Access If you want to access your camera by web browser outside of your LAN you need to configure following configurations 1 Choose Settings on the top of the camera web page then go to the Network gt IP Configuration section on the left side of the screen then uncheck the Obtain IP DHCP IP Configuration Obtain IP From DHCP F I
24. C Save Refresh Recording Location None EA Local Recording Location c WPCamRecord Enter the local folder Recording Location is used for alarm recordings and schedule recordings The local recording must be stored in local storage The default Windows storage location is c IPCamRecord The default Mac OS storage location is IPCamRecord If you modify the path on other cameras this default storage location will be modified accordingly Figure 4 56 Recording Location SD card FTP e SD card Only FI9803EP FI9900P FI9900EP The video will be saved in SD card Make sure the camera has been inserted the SD card On this page you can see the available space of the SD card FTP The video will be saved in FTP Please refer to FTP settings Local Recording Location For Windows OS the manual recording path is C IPCamRecord you can change another one For MAC OS the manual recording path is IPCamRecord Enter the local folder Click here you can enter the local folder 64 www foscam com 4 7 2 Alarm Record Alarm Recording Enable Pre Record Figure 4 57 4 7 3 Local Alarm Location On this page you can enable local alarm record and select the local alarm record time Local Alarm Recording Enable Local Alarm Recording jy Figure 4 58 4 7 4 Schedule Recording When the video is selected as FTP the device supports scheduled recording Storage Location Recording Location
25. Co Limited Tel 86 755 2674 5668 Fax 86 755 2674 5168 www foscam com Up control button 2 Down control button 3 Left control button 4 Right control button Click this button and go to center Section5 Cruise settings only F9805E If via RS485 interface to connect an external PT device you can use this feature The default cruise tracks have two types Vertical and Horizontal Vertical The camera will rotate from up to down Horizontal The camera will rotate from left to right gt Start cruise O Stop cruise If you want to define or change the cruise trace please go to Settings gt PTZ gt Preset Settings panel How to do cruise Firstly Select one track in the track drop down list Vertical Horizontal Select one of these Secondly Click Start cruise button the camera will cruise following the predefined path Thirdly Click stop button and finish cruising Section6 IR LED Lights Shenzhen Foscam Intelligent Technology Co Limited Tel 86 755 2674 5668 Fax 86 755 2674 5168 Click Infra led and there are three modes to adjust the infrared led Auto Manual and Schedule Auto Select it and the camera will adjust the infra led on or off automatically Manual Select it and turn off the infra led manually Schedule Select it and the IR led light will be off at the schedule period If you want to define or change the IR led lights schedule time please go
26. FOSCAM User Manual Outdoor HD IP Camera Model FI9804W Model FI9805W Model FI9805E www foscam com Model FI9803EP Model FI9803P Model FI9900P FI9800P Model FIS900EP V3 2 Table of Contents Is A E E A eageaed 1 SECURE 4 ONENTEWS minna e SAO A Na 4 FEKE FeaT S it A A Aid 4 1 2 PoE Power over Ethernet FI9805E FI9803EP FI9900 EP ooooncocccnccccononononocononononnonococonannnncnocononnnnnnnncnononnns 5 o BEE NISC AM clea a o siealesiaaronsaerhtaudeaebash a a Geoanedauanends 5 TAPIKIN SONES emerge ten NE A eR SEND TEESE OB RTS OR PEED 6 TScPMYSICal DSS CHOU O Misesa sar A E EN E N 6 ForFor TE T PO O EN ETN 6 A O O a a a ee orn eer re 8 PIS BOON VIEW oera ai O celal T eetgaso see 10 1 6 SD Card Management FI9803EP FI9900P FIQ900OEP ccceesecccccccsssssccecceccsssssceeecccesssseeeeccesessssseeceesessaees 10 ella lie AAA PP E ET 11 1 8 The different features between the models involvVed o o occcononononcnonononaannonononanannanocononananonacoconannnnnos 11 ZINC CESS me IPC ACT Aa 12 2 1 Hardware Connection amp Software InstallatiOD oooooonnnnnnnnnnnncccnnnnnnnncccnnnonononcccnnnonnnoccnnnnonaccnnnnonanocncnnnnoninicnnnnnns 12 22 ACCESS Me Camera INEAN aid AA A e 13 La WV WEG CONNECT AA e A 13 22 o MCIESS COMME CHO Masts E N RE deuce 14 2 03 ACCESS the Camera m WAN cunda E A A A di 14 2o si ie Mle FAC GS SSCS AMA E E as eb wauaner A 14 ZO ROMO ACCESS Maia
27. Internal Port Figure 4 29 47 www foscam com 8 Use domain name to access the camera via internet After the port forwarding is finished you can use the domain name http no to access the camera via internet Take hostname ycxgwp no ip info and http no 2000for example the accessing link of the camera via internet would be http ycxgwp no ip info 2000 4 4 5 UPnP UPnP AAA UPnP Figure 4 30 The default UPnP status is closed You can enable UPnP then the camera s software will be configured for port forwarding Back to the Device Status panel you can see the UPnP status Device Status Figure 4 31 The camera s software will be configured for port forwarding There may be issues with your routers security settings and sometimes may error We recommend you configure port forwarding manually on your router 4 4 6 Port This camera supports HTTP Port HTTPS Port ONVIF Port HTTP Port is used to access the camera remotely HTTP port By default the HTTP is set to 88 Also they can be assigned with another port number between 1 and 65535 But make sure they can not be conflict with other existing ports like 25 21 Shenzhen Foscam Intelligent Technology Co Limited Tel 86 755 2674 5668 Fax 86 755 2674 5168 Port Basic Settings Configuration HTTP Port 88 Hres Pot Tha ONWIF Port 888 L L Figure 4 32 Another way to ch
28. Open Cap Open Location from clipboard Recent Media Save Playlist to File Convert Save te Streaming X Quit a6 Bae gt 0001 E bbe im D Ch Se 1 00x J Figure 2 14 Open Media m p lt n T tes File key Disc a Network GE Capture Device Network Protocol Please enter a network URL d Show more options Figure 2 15 Sometimes you may need to enter the user name and password again Click OK and you can see the real time preview 19 www foscam com pD gt A E E EEEE e R SP a the bcabion Please enter a valid login name and a password User name A m f wes e aa i tk mi ie Aud Figure 2 16 A Hepes 807 10811300 1 VEC media player Figure 2 17 If you cannot play the video in the VLC player please check the port mapping You can read Quick Installation Guide about How to configure port forwarding NOTE If you modify the camera s username or password you had better reboot the camera or else the new username and password cannot take effect when you enter the authentication in the VLC 2 5 IP camera connection to the server Device supports ONVIF 2 2 1 protocol You can easily access the NVR with ONVIF or server with ONVIF Shenzhen Foscam Intelligent Technology Co Limited Tel 86 755 2674 5668 Fax 86 755 2674 5168 3 Surveillance Software GUI Please refer to the section 2 1 if
29. P RTSP ONVIF Operating System Microsoft Windows 2000 XP Vista 7 8 Mac OS System Browser Microsoft IE8 and above version or compatible browser Requirements Mozilla Firefox Google Chrome Apple Safari Other Features Three levels user role Supports IP Filtering Reset button is available DC 12V 1 0A ae A 153 L x 92 W x 86 H Operating 20 C 60 C 4 F 140 F 10 80 non condensing Environment 20 C 60 C 4 F 140 F Storage Humidity 0 90 non condensing Certification IC CSA CE FCC RoHS Limited 2 year warranty mes O e focal length f 4mm option 2 8mm 6mm 8mm Angle of View Horizontal 70 83 Video System Requirements Other Features Physical Environment Certification ITEMS Image Sensor Diagonal 75 H 264 30fps 60HZ 25fps S50HZ downward adjustable 720P 1280 x 720 VGA 640 x 480 QVGA 320 x 240 dual stream Image Compression Image Frame Rate Resolution Stream Image adjustment The hue brightness contrast saturation sharpness are adjustable Flip image flip and mirror Infrared mode Automatic or manual Night visibility Ethernet Remote Access Infrared lamp array night vision range up to 20 meters One 10 100Mbps RJ45 port P2P DDNS IEEE 802 3af Network Protocol IP TCP UDP HTTP HTTPS SMTP FTP DHCP DDNS UPnP RTSP ONVIF Microsoft Windows 2000 XP Vista 7 Mac OS u O Mm Operating Syste
30. P Address Set this in the same subnet 259255255 as your computer or keep it as default Subnet Mask Keep it as default Gateway and DNS Server Set it to the IP address of your router IP Configuration NA AAA 211 162 78 3 Figure 2 6 2 Enable UPnP and DDNS in the camera s settings page We recommend you to use the DDNS by factory default Shenzhen Foscam Intelligent Technology Co Limited Tel 86 755 2674 5668 Fax 86 755 2674 5168 www foscam com Select Yes and click Save Figure 2 7 DDNS Enable DDNS z Manufacturers DDNS test09 myfoscam_org Click Enable DDNS and click Save The content in the Manufacture s DDNS column is the domain name of your camera 3 You can see the port of your camera here If you want to set Remote Access for several cameras on the same network you will need to change the HTTPS port for each camera Figure 2 9 4 If the UPnP of the router has been enable you do not need to perform following steps Otherwise you need to select one of the following methods to configure port forwarding on your router For these steps we will be using the TP LINK brand wireless router as an example If there is a UPnP function in your router Choose Forwarding gt UPnP make sure that the Current UPnP Status is Enabled Shenzhen Foscam Intelligent Technology Co Limited Tel 86 755 2674 5668 Fax 86 755 2674 5168 Quick Setup UPnP WPS Networ
31. Record You can change the storage path 28 Go to Settings gt Record gt Storage Location panel Full Screen Click it to make full screen or you can double click the surveillance screen to make full screen Double click again and exit full screen Onscreen Mouse Control Right click the mouse and you can adjust the screen ration full screen and Zoom up gt Y Keep ration i Full Screen e E e Mot Sree A EIA AOS Zoom up n n o eo y err ad de gt A gt lt 4 maf a and Figure 3 11 Keep ration Select it and the camera will adjust the size of live window based on the computer monitor automatically Sometimes there is a black border around the video please select Keep ration to get a better visual quality Lvevideo O setings Outdoor Waterproof IP Camera Outdoor Mode x HD Mode 720P 3C O Flip Cruise IR LED Lights Color Adjustment m Figure 3 12 29 Full Screen Select it and Click it to make full screen press ESC and exit full screen Zoom up down Click it and the live view will be digital zoomed up then click Zoom Down and the live view back to original size Figure 3 13 NOTES 1 This camera don t support Pan Tilt function so here cann t allow to use Screen PTZ 2 For Mac OS the plugin cannot support Onscreen Mouse function so you cannot allow to use it 30 www foscam com 4 Advan
32. T READ 5 21 2014 191 MB 9 BS Adobe Reader XI Chinese Simplified Adobe Systems Incorporated 5 21 2014 155MB 1 6 10 2014 367MB 3 Tencent RTX Client Qe E 5 21 2014 EN o a WPS Office 9 1 0 4632 Kingsoft Corp 5 21 2014 Figure 6 9 6 1 3 I have forgotten the administrator password To reset the administrator password you had better unplug the network cable firstly After that press and hold down the RESET BUTTON about 5 seconds Releasing the reset button the password will turn to the factory default Default administrator username password admin with blank password 6 1 4 Subnet doesn t match Check whether your ip camera in the same subnet of your computer The step is Control Panel Network Connections Dbclick Local Area Connections Choose General Properties Check subnet mask IP address and gateways When you set IP address please make sure they are in the same subnet Otherwise you can t access camera 6 1 5 Camera can not record Camera can not record when click Record button or can t change the manually record path When you use Windows or Vista you may be not able to do manually record or change the record path because of the security settings of computer There are two ways to resolve this problem 1 Please add the camera as a trusted site to resolve this issue The steps are IE browser Tool Internet Properties Security Trusted sites Sites Add 2 Open IE browser then right click select
33. ac OS Network Protocol O O System Operating System Browser Microsoft IE8 and above version or compatible browser Requirements Mozilla Firefox Google Chrome Apple Safari Motion Detection Alarm via E Mail upload alarm snapshot to FTP Other Features Privacy Block Set privacy area manually User Accounts Three levels user role Firewall Supports IP Filtering Reset Reset button is available Dimension mm 153 L x 92 W x 86 H Physical Net Weight 380g Power Consumption lt 14 Watts Operating 20 C 60 C 4 F 140 F Temperature Operating Humidity 10 80 non condensing Environment Storage Temperature 20 C 60 C 4 F 140 F Storage Humidity 0 90 non condensing Certification CE FCC RoHS Limited 2 year warranty mes O BOW Angle of View Horizontal 70 meore Sirer 30fps 60Hz 25fps 50Hz downward adjustable 720P 1280 x 720 VGA 640 x 480 QVGA 320 x 240 Video Image adjustment The hue brightness contrast saturation sharpness are adjustable MeO O eee Data Rate IEEE802 11b 11Mbps Max IEEE802 11g 54Mbps Max IEEE802 11n 150Mbps Max Wireless Security WEP WPA WPA2 Network Protocol IP TCP UDP HTTP HTTPS SMTP FTP DHCP DDNS UPnP RTSP ONVIF Operating System Microsoft Windows 2000 XP Vista 7 Mac OS System iOS Android Requirements Browser Microsoft IE8 and above version or compatible browser Mozilla Firefox Google Ch
34. ange the HTTP port no Step 1 Open the Equipment Search Tool select the camera you would like to change the port of right click on the IP address and click on Network Configuration this brings up the network configuration box E D SA pa y E a Equipment Search To Lead Camera Mame IP Address Device ID Type Basic Properties Network Configuration E Upgrade Firmware Generate Check Code Select which camera Recover Default you d like to change the port for and right click Refresh Device List Flush Arp Buffer About Equipment Search Tool Figure 4 33 Obtain IP from DHCP server IP Address ieee AS Subnet Mask 255 O 0 Gateway 192 168 1 1 DNS Server 192 F SS NA Http Port User Password Enter the Username and d click OK cuca ee Note After changing the configuration device will automatically restart Figure 4 34 Step 2 Enter the username and password of the Administrator default username is admin with a blank password and click OK to apply changes 49 Step 3 Wait around 10 seconds you ll see that the camera s LAN IP address has changed In our example it was changed to 2000 so we see http 192 168 1 105 2000 in Equipment Search Tool Also the LAN IP address is now fixed at a static IP address of http 192 168 1 105 2000 This IP address will not change even if the camera is powered off and back on
35. art up The camera is designed for outdoor surveillance applications such as courtyards supermarket and school Controlling the IPCAM and managing images are simplified by using the provided web interface across the network utilizing wireless connectivity FOSCAM provides Phone APPs for Android and iPhone users please search and install App on App Store and Google Play for iOS and Android devices then you can view your camera anywhere anytime on your smart mobile devices 1 1 Key Features Standard H 264 video compression algorithm to satisfy the transmission of high definition video in narrow bandwidth network 1 0 Mega Pixel FI9803P FI9800P FI9803EP FI9804W 1 3 Mega Pixel FI9805W FI9805E 2 0 Mega Pixel FI9903P FI9900P FIS900EP Supports IE Firefox Google Safari browser or any other standard browsers Supports WEP WPA and WPA2 Encryption Wi Fi compliant with wireless standards IEEE 802 11b g n FI9804W FI9805W FI9803P FI9800P FI9900P PoE compliant with PoE standards IEEE 802 3af FI9805E FI9803EP FI9900EP IR night vision Range 20m FI9803P FI9800P FI9900P FI9900EP FI9803EP FI9804W 30m FI9805W FI9805E FI9903P Supports image snapshot Supports dual stream Supports IR Cut and the filter change automatically Embedded FOSCAM DDNS dynamic domain name service Service Supports remote viewing amp record from anywhere anytime 9 Multi level users management with password protection Motion detec
36. atus aan gt S p Refresh Basic Settings Li RENES Network Main stream video settings Enhanced Night Vision Definition y Stream Type HD Mode l On Screen Display Resolution 720P i e Bit Rate OM ma Snapshot Settings Eome Foal IR LED Schedule Key Frame Interval 30 m Alarm sie ee Variable bitrate Y Record EA Firewall Sub stream video settings System Stream Type HD Mode El Resolution 720P 7 Bit Rate 512K y Frame Rate 10 Ka Key Frame Interval 30 pan Figure 4 41 Enhanced Night video Definition The camera will automatically drop the frame to extend the recording time in the night Stream Type There are four types to identify different streams you have set If select the HD Mode the clearer video will become and it will take up more bandwidth If select the Smooth Mode the bandwidth is very narrow and bit rate is large that will lead to video can not play well The Equilibrium Model is a value between HD Mode and Smooth Mode Resolution The camera supports multiple types For example 1080P 960P 720P VGA The higher the resolution is the clearer video will become But the code flux will become larger too and it will take up more bandwidth Different models support different specific types Bit Rate Generally speaking the larger the bit rate is the clearer video will become But the bit rate configuration should combine
37. ax 86 755 2674 5168 www foscam com Camera Time _ _____ 55 one GMT 08 GMT 08 00 Beijing Singapore Taipei Y GMT 08 00 Beijing Singapore Taipei Y Singapore Taipei vw Sync with NTP server O NTP Server use DST ivi Figure 4 7 Time Zone Select the time zone for your region from the drop down menu Sync with NTP server Network Time Protocol will synchronize your camera with an Internet time server Choose the one that is closest to your camera Sync with PC Select this option to synchronize the date and time of the Network Camera with your computer Manually The administrator can enter the date and time manually Please select the date and time format use DST Select the use DST then select the daylight saving time from the drop down menu Click Save button to submit your settings NOTE If the power supply of camera is disconnect you need set the camera s time again 4 3 3 User Accounts Here you can create users and set privilege visitor operator or administrator The default administrator user accounts are admin with a blank password User Accounts Username Priego Change username Change password Figure 4 8 How to change the password Firstly select the account which you want to change the password then select Change password enter the Shenzhen Foscam Intelligent Technology Co Limited Tel 86 755 2674 5668 Fax 86 755 2674 5168 www
38. ced Camera Settings Click the button Settings goes to Administrator Control Panel to make advanced camera settings 4 1 Setup Wizard The way to set it you could refer to section 3 1 a Wizard Setup Wizard gt Follow the guide to set your camera click Next to start Please click the menu on the left for more settings Figure 4 1 4 2 Device Status Device Status contains four columns Device Information Device Status Session Status and Log it will show you various information about your camera 4 2 1 Device Information FIS6D4 VY anonymous 00841 FI9504Wv 2013 10 21 16 12 07 1 4 1 7 1 14 1 20 2 0 1 6 Figure 4 2 Camera Model The model of the device Camera Name The Device Name is a unique name that you can give to your device to help you identify it Click Basic Settings and go to Device Name panel where you can change your camera name The default device name is anonymous Camera ID Display the MAC address of your camera For example Device ID is 008414350787 the same Shenzhen Foscam Intelligent Technology Co Limited Tel 86 755 2674 5668 Fax 86 755 2674 5168 www foscam com MAC ID sticker is found at the bottom of the camera Camera Time The system time of the device Click Basic Settings and go to Camera Time panel and adjust the time System Firmware Version Display the System Firmware version of your camera Application Firmware Version Display the applicatio
39. e more easily alarmed Select one motion sensitivity 3 Trigger interval The interval time between two motion detections Here supports 5s 6s 7s 8s 9s 10s 11s 12s 13s 14s 15s Select one interval time 4 There are some alarm indicators A Camera Sound and PC Sound If the camera has connected with a speaker or other audio output device if you select Camera Sound or PC Sound when the motion has been detected the people around the camera will hear beep alarm sound B Send E mail If you want to receive alarm emails when motion is detected you must select Send E mail and set Mail Settings first C Take Snapshot If you select this checkbox when the motion has been detected the camera will snap the live view window as a still picture and load it to the FTP Make sure you have set FIP and set FIP as the storage path in Video gt Snapshot settings panel Time interval The interval time between two pictures D Recording If you select this checkbox when the motion has been detected the camera will recording and load it to the FTP server Make sure you have set FTP and set FIP as the storage path in Video gt Snapshot settings panel E Push message to the phone If you select this checkbox when the motion has been detected the camera will push the message to the phone which has been connected the camera 5 Set detect area Click set detect area and it pop up a window then you can draw the detection area Click Back button after settin
40. e O o F Local Recording Location c lPCamRecord Figure 4 59 P AOPEN EEE I TT F Shenzhen Foscam intelligent Technology Co Limited Tel 86 755 2674 5668 Fax 86 755 2674 5168 www foscam com Scheduled Recording To FTP Edit Scheduled Recording OD Ea LA LA LJ 50 EJ EJ a E EJ ED i Figure 4 60 When the video is selected as SD card the device supports pumping frame recording FI9803EP FI9900P FI9900EP support SD card Storage Location c lPCamRecord Figure 4 61 Shenzhen Foscam intelligent Technology Co Limited Tel 86 755 2674 5668 Fax 86 755 2674 5168 scheduled Recording To SD Card Save Refresh Enable Scheduled Recording y Enable Long time recording No 7 Record frame Record full strategy Cover B Audio Record No M Stream Main stream M Edit Scheduled Recording ee ee ee ee ee ee Oe ee a Oe ee ee ae Se Se Se ae se eee a 9 gg a A a y 4 _ _ _ _ A _ gt _ __ A _ A S _ _ ll A a A gg A A e 4 eS _ _ _m _ _ _ _ Oe A Oe OO ee Oe a ee Oe Oe Oe A ee Oe Oe eee eee e eoe e eoe __ __ __ 4 _ ___ ____ _ _ __ _ _ o __ _ _ 9 __ 6 __ o ___ _ __ 6 _ _ __
41. e is admin with a blank password Factory Reset Click this button to hard reset the camera to its default factory settings Figure 4 72 4 10 5 Reboot Click Reboot to reboot the camera This is similar to unplugging the power to the camera Lett Click this button to reboot your camera Figure 4 73 Shenzhen Foscam Intelligent Technology Co Limited Tel 86 755 2674 5668 Fax 86 755 2674 5168 5 Playback FI9803EP FI9900P FI9900EP On this page you can view the record files stored in the SD card FOSCAM Live video 6 settings Playback Indoor IP Camera 4 2014 11 S uU EW EFES 1 410 A 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 28 27 28 29 30 Monday 2014 11 10 Directory SD card x Time AllTime x Type Allrecord ES Continuous Play Section 1 Define the Record files time and Type Directory SD card Y storage path of record files Time All records Y Here supports three types current day current month and All records Another way select the time on the time amp date manually 4 2012 9 SMT WOT F S Ai 1 2 A A CBR Y 9 10 11 12 13 19 15 Thursday 16 17 18 19 20 21 22 2012 9 27 23 24 25 26 27 28 29 30 Type All records Y The type of records files Here supports two typs Normal record Alarm record and All records Click this button to search all record files satisfy the conditions you selected Continu
42. ebsites J Prompt Prompts before downloading potenta Y Intialos and sonpt ActiveX controls not marked as safe For gt contant y C Disable recommended Enable not secure LJ Prompt Run ActiveX controls and plugins a y E serena Unsigned Sctive contras val not be Custom evel L lt Takas effect after vou restart Internet Explorer Reset allzones Reset custom settings Reset to tedurhgh default v Reset Figure 6 10 If you allow the ActiveX running but still could not see living video Please change another port number to try Don t use port 8000 Save Refresh HTTP Port J88 Media Port 88 HTTPS Port 445 Figure 6 11 NOTE Make sure that your firewall or anti virus software does not block the camera or ActiveX If you could not see video please shut down firewall or anti virus software to try again 6 1 7 Can t access IP camera in internet There are some reasons 1 ActiveX controller is not installed correctly 2 The port which camera used is blocked by Firewall or Anti virus software Please change another port number and try again 81 3 Port forwarding is not successful Check these settings and make sure they are correct 6 1 8 UPnP always failed UPnP only contains port forwarding in our recent software Sometimes it may be failed to do port forwarding automatically because of firewall or anti virus software It als
43. ension mm 97 L x67 W x64 H Physical Net Weight 350g Waterproof OC Operating 10 C 55 C 14 F 140 F Temperature Environment 10 80 non condensing 20 C 60 C 4 F 140 F FCC IC CE WEEE IP66 Attention Power adapter should be used between 20 C 40 C and 20 90 relative humidity 6 4 CE amp FCC Electromagnetic Compatibility EMC FCC Statement HO This device compiles with FCC Rules Part 15 of the FCC Rules Operation is subject to the following two conditions m This device may not cause harmful interference and m This device must accept any interference received including interference that may cause undesired operation This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the installation manual may cause harmful interference to radio communications Operation of this equipment in a residential area Is like to cause harmful interference in which case the user will be required to correct the interference at his own expense 93 FCC Caution Any changes or modification not expressly approved by the party responsible for compliance could void the
44. ered is correct and again select Test 1 Cannot connect to the server 2 Network Error Please try later 3 Server Error 4 Incorrect user or password 5 The sender is denied by the server Maybe the server need to authenticate the user please check it and try again 6 The receiver is denied by the server Maybe because of the anti spam privacy of the server 7 The message is denied by the server Maybe because of the anti spam privacy of the server 8 The server does not support the authentication mode used by the device 51 www foscam com 4 4 8 FTP Settings lf you want to upload record images to your FTP server you can set FTP Settings FTP server Port FTP Mode Username Password Test FTP Server Port FTP Mode Username Password _Test Q Save 6 Refresh es eee b ftp 192 168 8 150 Example ftp 4 192 168 1 103 dir The maximum length of the address is 127 does not support the character amp PORT yaocuixiang The maximum length of the user name is 63 support numbers letters and symbols _ b The maximum password length is 63 does not support the character amp Figure 4 38 Save Refresh a ftp ftp mgenseal com Example ftp 192 168 1 103 dir The maximum length of the address is 127 does not support the character amp PORT a T A 7 lt The maximum length of the user name is 63 support n
45. f camera such as camera name camera time wireless settings IP configuration en nD oo Setup Wizard wine Setul p WV liza d St art Follow the guide to set your camera click Next to start Please click the menu on the left for more settings Next J Figure 3 3 Device Name You could give name for your camera setup Wizard FI9805W The maximum Device Name length is 20 support English numbers letters and symbols Figure 3 4 Shenzhen Foscam Intelligent Technology Co Limited Tel 86 755 2674 5668 Fax 86 755 2674 5168 www foscam com System Time Select the time zone you need to set the date time format etc Setup Wizard GMT Greenwich mean time London Lisbon Sync with NTP server Y tmenistgov TE mm 2 En use DST Figure 3 5 Wireless networks Click Scan find the SSID of your wireless router select and enter the password Setup Wizard Wireless Network List 1 sonatas eemo aw em mewer ET Teen wewe a ee eee nz veme Teraa paseno gi se rea Tenes O e ag tints eters an ss OSCAM docdev 2 Figure 3 6 IP Set IP address of the camera You could choose to obtain an IP automatically or set the IP address according to your needs Shenzhen Foscam Intelligent Technology Co Limited Tel 86 755 2674 5668 Fax 86 755 2674 5168 Setup Wizard Obtain IP From DHCP Note Once you save your settings the camera will restart Previou
46. for your PPPoE account Status PPPoE Basic Settings Network Sara amp Refresh IP Configuration Use PPPoE DDNS UPnP Port l PPPoE account The maximum length of the user name is 20 support numbers letters and symbols Mail Settings FTP Settings PPPoE password The maximum password length is 12 including numbers letters and symbols Video e Alamo Decor Note Once you save your settings the camera will restart Figure 4 24 4 4 4 DDNS FOSCAM camera has embedded a unique DDNS domain name when producing and you can directly use the domain name you can also use the third party domain name FOSCAM domain name Here take cp4911 myfoscam org for example Go to option of DDNS on the Settings gt Network panel you can see the domain name 44 qu 1 Status DDNS b Basic Settings Network IP Configuration Enable DONS ee Manufacturers DDNS l Manufacturer s DDNS UPnP Port Mail Settings Third Party DDNS FTP Settings DDNS Server video ooo Domain Alarm 4 Save Refresh i Restore DDNS to factory None Figure 4 25 Now you can use http Domain name HTTP Port to access the camera via internet Take hostname cp4911 myfoscam org and HTTP Port no 8000 for example the accessing link of the camera via internet would be http cp4911 myfoscam org 8000 Restore DDNS to factory lf you have configured Third Party
47. gested 1 0GHz Display Card 64M or above Microsoft Windows 2000 XP Vista 7 Supported OS Mac OS Requirements OS Android sar IE8 and above version or compatible browser Firefox W Chrome Safari or other standard browsers Software Upgrade Upgrade from network Certification IC CE FCC RoHS Limited 2 year warranty Specification FI9805E Image Sensor High Definition Color CMOS Sensor Image Sensor Mini Illumination O Lux With IR Illuminator Lens IR_CUT Filter can switch automatically Angle of View Horizontal 70 Diagonal 75 Linear Input Output which can realize two way voice the Input Output Intercom Image Compression H 264 Image Frame Rate 25fps 50HZ 30fps 60HZ Down adjustable Resolution 960p 1280 x 960 720p 1280 x 720 VGA 640 x 480 View H 264 dual streaming Audio Video The brightness contrast saturation chromaticity is Image adjust adjustable Infrared mode Auto amp Manually Night visibility 08mm 36 IR LEDs Night visibility up to 30 meters Ethernet One 10 100Mbps RJ 45 TCP IP UDP IP HTTP SMTP FTP DHCP DDNS UPNP Supported Protocol ONVIF Support IP address static IP address dynamic IP address Alarm detection The motion detecting I O alarm Support Email FTP I O output alarm etc alarm inform Alarm inform way DC 12V 2 0A EU US AU adapter or other types option POWER Interface Power Consumption lt 8 Watts parewate Audio Input Output Interface a
48. gh this interface IPCAM can be connected with various network devices such as hub router etc 3 Reset button Press and hold on the reset button for 5 seconds Releasing the reset button the password will back to the factory default administrator password The default administrator user is admin with no password 4 Power Interface Connect the external power adapter request for 12V 2A or 12V 1A power 5 Audio input interface The jack is used to plug external input device such as sound pick up device directly Here microphone cannot directly insert to the interface it must connect to adapter first NOTE FI9803EP FI9903P hasn t this section 6 Audio output interface The jack is used to plug external output device such as loud speaker directly Here microphone cannot directly insert to the interface it must connect to adapter first NOTE FI9803EP FI9903P hasn t this section 7 RS485 Cradle head interface This camera supports the standard 485 cradle head protocol Pelco D and Pelco P Please configure the RS485 protocol corresponding information first go to Settings PTZ RS485 Configuration page and do settings or else the cradle head may cannot work NOTE Only FI9805E has this section 1 5 3 Bottom View There are up to two labels located at the bottom of the camera this is an important feature of original Foscam cameras If your camera does not have labels it may be a clone Cloned Foscam cameras can not use original
49. gs When something moving in the detection area the camera will alarm 59 a se A ae SI AAA CC NM BAM A E ee eS O 7 T AA gt AAA CC RA MA ie cn A A A A AAA A AAA dt tt EE A o o l o SO AA A A IAS IO A A e I I O A A O IIA A A A A n n y a PPP O III A a IE BEBES A e B aia A AA AA O E CI a a O O OO MEE A el ll aa OIT O Bo Y II E LA VIAS AL MU SAO E PO m O e A PU G ICAA E AAA lar es A Y A lt gt lt lt o EE SS RELA LDL SSD CEOS CORRE Teese Se ee eee SOLS FSS NOLS eee OO FO 6 E O EA SETTLE CO COO GeSOCSe S668 666866 6666 ws eu A A A E YYYY ee eee ee eee ane e eae eee MAA NA AAA NM A A A A A A a a E O E PSI AA AAA PA oe eee AE AAA A A A ee CA A PA AIR AAA AENA A AAN A AICA A E A EII T 4 S GTA ee 66646 00 4 69 d 0 6 4 amp 6 0 o 6 S FOO 3 6 4999 74 8 ici Figure 4 49 6 Alarm Schedule 1 Alarm anytime when motion is detected Click the black button up the MON you will see all time range turn red When something moving in the detection area at anytime the camera will alarm E Set Detection Area EZ a a gt A E MON TUE WED TAU FRI SAT SUN Pa Y T _ E h _ T 2 T o Figure 4 50 2 Specify an alarm schedule Click the week day words the corresponding column will be selected For example click TUE the all column of TUE turns to red that
50. hird Party DDNS successfully the Foscam Domain Name will be invalid The Third Party DDNS and the Foscam Domain Name cannot work at the same time the last time you configured will take effect 2 Do port forwarding within the router Example The camera s LAN IP address is http 192 168 8 100 2000 Firstly login the router goes to the menu of Port Forwarding or Port Trigger or named Virtue Server on some brands of router Take Linksys brand router as an example Login the router and goes to Applications amp Gaming gt Single Port Forwarding Secondly Create a new column by LAN IP address amp HTTP Port No of the camera within the router showed as below Wireless N Home Router Applications amp Applications amp Gaming Single Port Forwarding i i Gaming Setup Wireless Security Access Restrictions Administration Single Port Forwarding Application Name External Port internal Port Protocol TolP Address Enabied None y riai 192 168 8 O ihe m Fill the HTTP Port no of the camera on the column of External Port and Internal Porte Both 192 168 84 100 192 168 8 192 168 8 O 192 168 O O O 192 169 8 gt Fill the LAN IP of the camera here just input the last sectione Both 192 168 8 as 192 168 O Fill the Media Port no of the Assign a name camera on the column of as you like here External Port and
51. imited Hardware Warranty FOSCAM products are warranted to be free from manufacturing defects in materials and workmanship starting from the shipping date of FOSCAM This limited hardware warranty does not cover e Software including the software added to the products through our factory integration system software that included in the CD etc Usage that is not in accordance with product instructions Failure to follow the product instructions Abuse firmware upgrade without the authorized technician s guidance Normal wear and tear 94 Return Procedures Please read FOSCAM warranty policy amp policy of your reseller first before sending items back to point of purchase e Customer must first contact point of purchase to obtain a Return Merchandise Authorization RMA number before returning the product If the product you received is suspected to be defective and the product warranty has not expired The RMA number will allow your reseller to track your return much easier and help them expedite processing your request After receiving your RMA case number pack the item s very well with the original box and all the original accessories included such as power adapters brackets cables manuals and driver CD disks o Write your RMA number and the return reason the problem of the product on the warranty card along with the complete package to send them back Replacement Services If customers ask for replacement service
52. ited or exclusive remedy to achieve its essential purpose or otherwise Purchaser s exclusive remedy as against FOSCAM shall be the repair or replacement of defective parts If FOSCAM lists a product on its website specification in error or that is no longer available for any reason FOSCAM reserves the right to explain it without incurring any liability All rights reserved FOSCAM and the FOSCAM logo are trademarks of ShenZhen FOSCAM Intelligent Technology Limited registered in the U S and other countries 96 www foscam com 7 Obtaining Technical Support While we hope your experience with the IPCAM network camera is enjoyable and easy to use you may experience some issues or have questions that this User s Guide has not answered If you have problem with FOSCAM IP camera please first contact FOSCAM reseller for solving the problems If our reseller cannot provide service please contact our service department tech foscam com CE FE Z Shenzhen Foscam intelligent Technology Co Limited Tel 86 755 2674 5668 Fax 86 755 2674 5168
53. iver Figure 4 36 50 1 SMTP Server Port Transport Layer Security Enter SMTP server for sender SMTP port is usually set as 25 Some SMITP servers have their own port such as 587 or 465 and Transport Layer Security usually is None If you use Gmail Transport Layer Security must be set to TLS or STARTTLS and SMTP Port must be set to 465 or 25 or 587 which port you choose should be decided by which Transport Layer Security you select 2 SMTP Username password ID account and password of the sender email address 3 Sender E mail Mailbox for sender must support SMTP 4 Receiver Mailbox for receiver need not support SMTP you can set 4 receivers 5 Save Click Save to take effect 6 Test Click Test to see if Mail has been successfully configured Click Test to see if Mail has been successfully configured Save JH Refresh Enable SMTP Server smtp qmail com SMTP Port 25 Transport Layer Security SAM G Mail only supports TLS at Port 465 and STARTTLS at Port 567 or 25 Need Authentication No v SMTP Username yaoyao gmail com SMTP Password ET Success sender E mail yaoyao qmail cam First Receiver yaoyao 163 com second Receiver Third Receiver Fourth Receiver Figure 4 37 If the test success you can see the Success behind the Test at the same time the receivers will receive a test mail If the test fails with one of the following errors after clicking Test verify that the information you ent
54. k Wireless i p Current UPnP Status Enabled Forwarding Virtual Servers Current UPnP Settings List Port Triggering DMZ Security Figure 2 10 ID App Description External Port Protocol internal Port IP Address Status lf there is no UPnP function in your router You need to manually add port HTTPS port forwarding refer to the following steps You need go to the Forwarding gt Virtual Servers panel for setup Quick Setup Virtual Servers WPS Network ID Service Port Internal Port IP Address Protocol Status Modify Wireless DHCP Forwarding Enable All Disable All Delete All Click Add New Port Triggering DMZ UPnP y Figure 2 11 Quick Setup Add or Modify a Virtual Server Entry WPS Network Sede eat Wireless TEE Internal Port Xx Only valid for single Service Port or leave it blank l IP Address 192 168 1 100 Forwarding Protocol ALL Input the port and IP address of Port Triasern Status Enabled ninio your camera and click Save DMZ UPnP Common Service Port Select One Security Parental Control re Back Access Control Figure 2 12 17 Status Quick Setup Virtual Servers ass Network ID Service Port Internal Port IP Address Protocol Status Modify Wireless A 4 443 443 192 168 1 100 ALL Enabled Modify Delete DHCP Forwarding Here you have finished the EC AddNew Enable Disable Al _DeleteAl Port Forwa
55. leted automatically 4 8 PTZ only FI9805E This page will allow you to change the pan tilt speed and do RS485 settings Only FI9805E have this feature 4 8 1 Pan Tilt Speed There are five Pt speed types very fast fast normal slow and very slowly Select the desired pan tilt speed type and click save button Pan amp Tilt Speed Ref Figure 4 64 4 8 2 RS485 Configuration This camera supports the standard 485 cradle head protocol PELCO D and PELCO P Please configure the RS485 protocol corresponding information first or else the cradle head may cannot work Shenzhen Foscam Intelligent Technology Co Limited Tel 86 755 2674 5668 Fax 86 755 2674 5168 www foscam com RS485 Figure 4 65 4 9 Firewall This section explains how to control the access permission by checking the client PC s IP addresses It is composed of the following columns Block access from these IP addresses and Only allow access from these IP addresses IP Filtering Enable Firewall v Block access from these IP addresses Y Block access from these IP addresses Only allow access from these IP addresses Figure 4 66 Enable firewall If you select Only allow access from these IP addresses and fill in 8 IP addresses at most only those clients whose IP addresses listed in the Only allow access from these IP addresses can access the Network Camera If you select Block access from these IP addresses only tho
56. m Browser Microsoft IE8 and above version or compatible browser Mozilla Firefox Google Chrome Apple Safari Motion Detection Alarm via E Mail upload alarm snapshot to FTP Privacy Block Set privacy area manually User Accounts Three levels user role Firewall Supports IP Filtering Storage SD card and local storage Reset button is available DC 12V 1 0A Power Consumption 4 2 Watts Max Dimension mm 153 L x 92 W x 86 H Net Weight 380g Operating 20 C 60 C 4 F 140 F Temperature Reset Power Supply Operating Humidity 10 80 non condensing Storage Temperature 20 C 60 C 4 F 140 F Storage Humidity 0 90 non condensing CE FCC RoHS Limited 2 year warranty 08 84 Glass Lens f 4mm 6mm 8mm 12mm Opention F1 2 Horizontal 70 Diagonal 75 H 264 Image Frame Rate 30fps 60HZ 25fps 50HZ downward adjustable Resolution 1080P 1920x1080 720P 1280 x 720 VGA 640 x 480 QVGA 320 x 240 dual stream Lens Type focal length Lens Aperture Angle of View Image Compression Video Stream Image adjustment The hue brightness contrast saturation sharpness are adjustable Flip image flip and mirror Infrared mode Automatic or manual Night visibility With 2 Infrared Lamp Array Night Vision Range up to Ethernet Remote Access One 10 100Mbps RJ45 port P2P DDNS IP TCP UDP HTTP HTTPS SMTP FTP DHCP DDNS UPnP RTSP ONVIF Microsoft Windows 2000 XP Vista 7 8 M
57. mm F12 Horizontal 96 Diagonal 102 H 264 30fps 60Hz 25fps 50Hz downward adjustable 1080P 1920x1080 720P 1280 x 720 VGA 640 x 480 QVGA 320 x 240 dual stream m 77 Sensor Image Sensor Display Resolution Lens Type Lens Aperture f Stream Video The hue brightness contrast saturation sharpness are adjustable flip and mirror Automatic or manual With 30pcs IR LED Night Vision Range up to 20m External RCA interface for two way audio PCM G 726 One 10 100Mbps RJ45 port P2P DDNS IP TCP UDP HTTP HTTPS SMTP FTP DHCP DDNS UPnP RTSP ONVIF Microsoft Windows 2000 XP Vista 7 8 Mac OS Microsoft IE8 and above version or compatible browser Operating System System Requirements Mozilla Firefox Browser Google Chrome Apple Safari Ss italia Slalala A l3 3 3 3 39 5 2 gt 3 lha ra Ie eae n e a gt O S a Sisisa 3 318 2 8 Qlo 5 O 2 Ola e c o D ololo D Im oO S 5 o O a E A Q a Oo x de 3 z I E 3 8 3 23101 5 Y S lt a O o D 0 lt o DIS E O O tn YN 3 pelos O 3 e wm 5 DIN O z o 5 5 Alarm via E Mail upload alarm snapshot to FTP Other Features Power Supply DC 12V 1 0A POE Standard 802 3af mension LxWxH Environment Water PoR S Physical Sie 2 3 3 S Se J 5 09 C 3 a D 91 20 C 60 C 4 F 140 F Storage Humidity 0 90 non condensing Certification
58. n WYPA2 i solD Network Name Encryption Quality 2 Enter the Password ChinaNet HkWe WPA at password of your router airNET free Unencrypt wl wingate WPA2 fl Y CPA WPA il MERCURY MVV150R WPA2 oft Y CPA2 WPA il foscam WEP ait uniQtab WPAQ at 1 Click the SSID of your router and the relevant information foscam wifi WPA2 dit f j i will be filled in the fields Figure 4 23 43 Step 3 Please click on the Save button after all settings have been entered and disconnect the network cable Never shut down the power of the camera until the IP camera is able to connect to the wireless network The LAN IP address will disappear on the window of Equipment Search Tool when the camera is configuring a wireless connection Wait about 1 minute the camera should obtain a wireless connection and the LAN IP of the camera will show again on the window of the Equipment Search Tool The IP address may have changed after the camera receives a wireless connection we recommend setting a static local IP address if this IP address changes by right clicking the camera in Equipment Search Tool setting a static IP and pushing OK Congratulations You have set up the wireless connection of the camera successfully NOTE If you fail to make a wireless connection please refer to your seller or contact us directly for assistance 4 4 3 PPPoE Some models support PPPoE If you are using a PPPoE connection enable it and enter the User Name and Password
59. n firmware version of your camera Plug In Version Display the plug in version of your camera 4 2 2 Device Status On this page you can see device status such as Alarm status NTP DDNS status WIFI status and so on Not connected Figure 4 3 4 2 3 Session status Session status will display who and which IP is visiting the camera now Session status Figure 4 4 4 2 4 Log The log record shows who and which IP address accessed or logout the camera and when Shenzhen Foscam Intelligent Technology Co Limited Tel 86 755 2674 5668 Fax 86 755 2674 5168 www foscam com PT to o Record 2014 01 09 14 11 1 edi s amuen Fill in one page number click Go button 2014 01 09 14 11 1 and go to the ia ico page eje want owainamem oe m roos oasasommnaam O OC roor ownee Figure 4 5 Reboot the camera and clear the log records 4 3 Basic Settings This section allows you to configure your Camera Name Camera Time Mail User Accounts and Multi Device 4 3 1 Camera Name Default alias is anonymous You can define a name for your camera here such as apple Click Save to save your changes The alias name cannot contain special characters anonymous Figure 4 6 4 3 2 Camera Time This section allows you to configure the settings of the internal system clocks for your camera Shenzhen Foscam intelligent Technology Co Limited Tel 86 755 2674 5668 F
60. n page to check for the latest firmware versions available Click Browse choose the correct bin file and then click System upgrade Don t shut down the power during upgrading After upgrading you can see the upgrade result 70 www foscam com System sul ea Your camera will reboot during the firmware upgrade System Upgrade l Figure 4 68 Upgrade Firmware by Equipment Search Tool Eg Double click the Equipment Search Tool shot icon select the Camera IP that you want to upgrade the firmware Then select Upgrade Firmware and enter the username and password choose the firmware file and upgrade ION Name Network Configuration i Generate Check Code Wt Recover Default Refresh Device List Flush Arp Buffer About Equipment Search Tool Figure 4 69 Shenzhen Foscam Intelligent Technology Co Limited Tel 86 755 2674 5668 Fax 86 755 2674 5168 Device ID Type O06 26E55AB1E IPC User admin O Enter the User name Password 38 land Password Upgrade System Firmware Upgrade Web UI OK Note After firmware upgrade the device will automatically restart Camera Name Anonymous Upgrade Firmware Anonymous Figure 4 70 CAUTION If your camera works well with the current firmware we recommend not upgrading Please don t upgrade the firmware unnecessarily Your camera may be damaged if mis configured during an upgrade NOTE 1 Don t upgrade the firmware
61. o has much relation with router s security settings SO we recommend you do port forwarding manually You can view your camera in internet successfully after you do port forwarding manually in your router 6 1 9 Camera can not connect wireless If your camera could not connect wireless after you set wireless settings and plug out the cable Please check whether your settings are correct or not Normally camera can t connect wireless mainly because of wrong settings Make sure broadcast your SSID use the same encryption for router and camera 6 2 Default Parameters Default network Parameters IP address obtain dynamically Subnet mask obtain dynamically Gateway obtain dynamically DDNS Embedded FOSCAM DDNS Service Username and password Default admin username admin with a blank password 6 3 Specification mes O a O Lux With IR Illuminator Angle of View Horizontal 70 mee oan 23fps 1280 x 720 25fps VGA 25fps QVGA Image adjustment The hue brightness contrast saturation sharpness are adjustable 82 Flip image flip and mirror Infrared mode Automatic or manual Night visibility With 1 Infrared Lamp Array Night Vision Range up to 20m Ethernet One 10 100Mbps RJ45 port Wireless Standard IEEE 802 11b g n IEEE802 11b 11Mbps Max Data Rate IEEE802 11g 54Mbps Max IEEE802 11n 150Mbps Max Wireless Security WEP WPA WPA2 Network Protocol IP TCP UDP HTTP HTTPS SMTP FTP DHCP DDNS UPn
62. ous Play Select the checkbox to play continuously all the record files 74 www foscam com Section 2 Search record files On this panel you can see all record files satisfy the conditions you set Section 3 Play Stop Audio Full screen buttons Please select one record file before use these buttons Y Click this button to play the record files Q Click this button to stop the record files a D Open or stop audio Click this button to make full screen and double click left mouse to exit full screen 6 Appendix 6 1 Frequently Asked Questions 6 1 1 Install the ActiveX of Firefox browser Google Chrome and IE Chrome gt sida File Edit View Favorites Tools Help e Favorites PCam Client Name IPCWebComponents exe Publisher ShenZhen Foscam Intelligent Technology Co Ltd E more options aS While files from the Internet can be useful this file type can potentially harm your computer Only install software from publishers you trust What s the risk Figure 6 1 Shenzhen Foscam Intelligent Technology Co Limited Tel 86 755 2674 5668 Fax 86 755 2674 5168 Welcome to the PCWebComponents Setup Wizard This will install IPCWebComponents 3 0 0 2 on your computer It is recommended that you close all other applications before continuing Click Next to continue or Cancel to exit Setup Figure 6 2 Select Destination Location here should IPCWebComponents be installed Se
63. path 56 snapshot Settings Save gt E lt a Refresh Manual snap Quality Medium EA Pictures Save To FTP Ka Enable timing to capture y Capture interval 2 1 65535s Enable set Filename y Filename NAME Schedule _ A _ gt _ gt _ _ _ _ gt _ _ E_x ____ ___ _ ey ep pg K_ A 4 lA II 242 gt AI A _ IA A 22 A KA _ 22 22 KA A _ gt _ _ __ __ A tg ng lt A A ___ __ ___ _ A RA A 24242 q 2 pg pg ng gg A _ z2A IA __ y Y 2 5 o O 5 5s y l 9 _ _ _ A A AAA ep gg ng pg ep 5 A A _ _ _ S _ _ _ _ _ _ _ _ Figure 4 46 Manual snap Quality Low Middle and High The higher the quality the picture will be clearer Pictures Save To FTP or SD card If you have done FTP and Alarm settings when alarming the camera will snap pictures to the FTP or SD card automatically If you select the FTP you can set the file name which the picture save to For example file name is NAME the snapshot picture is NAME_20150605 180000 jpg Only FI9803EP FI9900P FIS900EP support SD card Enable timing to capture To enable capture interval follow the steps below 1 Select Enable timing to capture 2 Capture interval The interval time between two captures 3 Select the capture time O Capture anytime Click the black button up the MON you will see all time range turn red When something moving in the de
64. please contact point of purchase and follow their policy eo Our technicians will inspect all items returned for replacement requests If the retuned product is found in working order we will return the same item received However customers shall be responsible for all shipping amp handling charges incurred for getting the units back to customers f returned products are found defective we will replace the product and assume the shipping cost for sending back the replacement unit to customers If for any reason we are unable to provide a replacement of the original returned item s You will have a choice for a Substitute item at the same equal value o We do not provide exchange and replacement due to normal hardware upgrade according the market after 14 days after the product is delivered eo Our technicians will test the product before send out the replacement any other demand for more than two times replacement for the same product during replacement limit will be rejected o Replaced products are warranted from the balance of the former warranty period Warranty Forfeiture o Warranty is void if purchase from unauthorized distributor or reseller o Warranty is void if trade mark serial tags product stickers have been removed altered or tampered with o Warranty is void for mishandling improper use or defacing the product Abuse firmware upgrade without the authorized technician s guidance o Warranty is void for ph
65. ps LAN IP HTTPS port NO Go to Settings Network Port panel you can see and change the HTTP and HTTPS port NO z Save E Refresh HTTP Port 88 i 7 HTTPS Port 443 ONVIF Port 65533 Figure 2 3 NOTE When logging in for the first time you will need to download and install the add on 13 www foscam com Usemame ii Stream Mainstean v Language Click Install This website wants to install the following add on TPCWebCorrponents exe from ShenZhen Foscam Intelligent Technology Co Ltc What s thre iisk Figure 2 4 2 2 2 Wireless connection Some models support EZLink wireless connection please refer to the Quick Installation Guide 2 3 Access the Camera in WAN 2 3 1 Static IP Addresses Users who have static IP addresses do not need to set DDNS service settings for remote access When you have finished connecting the camera using the LAN IP address and port forwarding you can access the camera directly from the Internet using the WAN IP address and port number How to Obtain the WAN IP address from a public website To obtain your WAN IP address enter the following URL in your browser http www whatismyip com The webpage at this address will show you the current WAN IP Shenzhen Foscam Intelligent Technology Co Limited Tel 86 755 2674 5668 Fax 86 755 2674 5168 www foscam com Your IP Address Is E IP
66. rding setup DMZ UPnP Figure 2 13 5 Now you can access your IP camera by https domain name HTTPS port via the Internet 2 4 Using the VLC player This camera supports RTSP streaming here you can view the camera using VLC player RTSP URL rtsp user name password IP port number videosream The part in the square brackets may be omitted user name amp password The user name and password to access the camera This part can be omitted IP WAN or LAN IP address port number lf there is the RSTP port number on the Port page you must only use RTSP port number otherwise you must only use http port number Videostream Here support three modes videoMain videoSub and audio When the network speed is bad here you had better select videoSub If you select audio you can only hear the sound but cannot see the video For example IP 192 168 1 11 Port number 88 Username admin Password 123 Here can enter one of the following URLs in the VLC 1 rtsp admin 123 192 168 1 11 88 videoMain 2 rtsp 192 168 1 11 88 videoMain 3 rtsp 123 192 168 1 11 88 videoMain 4 rtsp fadmin 192 168 1 11 88 videoMain Open the VLC and go to Media Open Network Stream option then enter the URL into VLC 18 VLC media player Playback Audio Video Tools View Help lm Open File Ctrl O gt Advanced Open File Ctrl Shift 0 A Open Folder Ctrl F o Open Disc Ctrl D Open Network Stream
67. rome Apple Safari m i O OESE 132 L x 72 W x 80 H 86 Physical Gross Weight 1186 89 Net Weight 870g Operating 20 C 60 C 4 F 140 F Temperature Operating Humidity 10 80 non condensing Environment 20 C 60 C 4 F 140 F 0 90 non condensing Aperture o re Aperture 1 2 2 L Angle of View Horizontal Li ens Diagonal 75 Video 960p 1280 x 960 720p 1280 x 720 VGA 640 x 480 H 264 dual streaming The brightness contrast saturation chromaticity is ea adjust adjustable nada mode Off amp Manually Night visibility O8mm 36 IR LEDs Night visibility up to 30 meters Ethernet One 10 100Mbps RJ 45 TCP IP UDP IP HTTP SMTP FIP DHCP Supported Protocol RTSP HTTPS DDNS UPNP ONVIF Wireless Standard WIFI IEEE802 11b g n Support IP address static IP address dynamic IP address Alarm detection The motion detecting Support Email FTP etc alarm inform way DC 12V 2 0A EU US AU adapter or other types option POWER Interface Power Consumption lt 8 Watts Hardware Audio Input Output Interface gt One audio input oe One audio output jack Reset Buttons Buttons One Reset Reset Operate Temper 20 C 60 C 4 F 140 F Operate Humidity 10 80 non condensing Storage Temper 20 C 60 C 4 F 140 F Environment a Storage Humidity 0 90 non condensing 180 L x 98 W x 103 H Net Weight 1300g 87 PC 2 0GHZ or above suggested 3 0GHz 256MB or above sug
68. s Finish Figure 3 7 NOTE It needs about 1 minute to connect the camera to your router 3 2 Surveillance Window Cruise IR LED Lights Color Adjustment Figure 3 8 9 24 Section FOSCAM Logo LiveVideo Settings buttons FOSCAM Foscam Loco O LiveVideo Path to surveillance window Click this button and back to the surveillance window Qu Settings np ae FON a Path to Administrator Control Panel Click it and it will lead to Administrator Control Panel and do advanced settings Section2 Multi Device Window OL oft off The firmware inside the camera supports up to maximum of 9 cameras being monitoring at the same time You can add other cameras in multi camera panel Section3 Mode Stream Mirror Flip buttons Mode 1 50HZz Indoor surveillance Region Europe China 2 GOHZ Indoor surveillance Region USA Canada 3 Outdoor Mode Outdoor surveillance Stream The default stream supports multiple modes For example HD Mode 720P 30fps 2M meanings Stream type Resolution Maximum frame rate Bit rate Different models support different specific mode 1 Stream type no Identify the stream type 2 Resolution The bigger the resolution the better of the image quality is If you are accessing the camera via internet and want to get more fluent video streaming please select resolution VGA 3 Maximum frame rate The maximum frame rate is 30
69. se clients whose IP addresses are in the IP list cannot access the Network Camera Click Save to take effect 4 10 System In this panel you can back up restore your camera settings upgrade the firmware to the latest version restore Shenzhen Foscam Intelligent Technology Co Limited Tel 86 755 2674 5668 Fax 86 755 2674 5168 the camera to default settings and reboot the device 4 10 1 Back up amp Restore Click Backup to save all the parameters you have set These parameters will be stored in a bin file for future use Click Browse and select the parameters file you have stored then click Submit to restore the restore the parameters Backup is used to save your current settings It is recommended to backup your configuration before modifying or Upgrading firmware settings can be restored by uploading the backup file Path Submit Note 1 All current settings will be lost when importing a configuration file If an incorrect file is loaded the camera may stop working correctly 2 Keep the power on during this process or you may damage your camera Your camera will reboot automatically once restoration is completed Figure 4 67 4 10 2 System Upgrade Click Download the latest firmware you will see the following screen And click save to save the firmware on your computer locally Your current firmware version will be displayed on your screen You may go to the Status gt Device Informatio
70. sed from internet Figure 4 18 Return to video window You will see all of the cameras accessible through the internet When you are away from home you can use the first camera s DDNS domain name and port to view all the cameras via internet 4 4 Network This section will allow you to configure your camera s IP PPOE DDNS Wireless Settings UPnP Port Mail Settings and FTP Settings 4 4 1 IP Configuration If you want to set a static IP for the camera please go to IP Configuration page Keep the camera in the same subnet of your router or computer Shenzhen Foscam Intelligent Technology Co Limited Tel 86 755 2674 5668 Fax 86 755 2674 5168 www foscam com IP Configuration IP Configuration lt Obtain IP From DHCP IP Address a 16 0 249 Subnet Mask Primary DNS Server Secondary DNS Server 0 oooo ee 0 0 Note Once you save your settings the camera will restart Figure 4 19 Changing settings here is the same as using the Equipment Search Tool It is recommended that you use the subnet mask gateway and DNS server from your locally attached PC If you don t know the subnet mask gateway and DNS server you can check your computer s local area connection as follows Control Panel Network Connections Local Area Connections Choose Support Details Network Connections Fie Edit View Favorites Tools Advanced cc hl Q Back i B P Search F gt Folders Ei Address Ne
71. status Not in sectors q We tA Do NTP status Cra able r Video lt _ _ DOKS stat Aan Record y OTT wt Mao 1 PIZ i Feng wera ted status Make sure each camera you need add me could login with DDNS name and port Figure 4 16 Click Multi Device Settings Choose The 2nd Device Fill in the 2nd camera s name DDNS domain name port number Enter user name and password and then choose Add Refresh FISS21W for ebuyer 192 168 11 241 i n anonymous 192 165 11 203 Cameras On LAN a The ist Camera This Camera The 2nd Camera anonymous 192 168 11 203 nee 1 Camera Name 2 Host camera no ip info HTTP Port 001 3 Media Port 801 Username admin Password _ Delete The 3rd Camera None 5 The 4th Camera None Figure 4 17 The camera model MJ or H264 2 The 2nd camera s name 39 www foscam com 3 Fill in the 2nd camera s DDNS host not LAN IP 4 Enter the 2nd camera s user name and password 5 Click Add button and to take effect NOTE Here the Host must be entered as the second camera s DDNS domain name not its LAN IP O Refi apple 192 168 13 102 mycamera 192 168 13 108 ipcam 192 1656 13 107 FI98214 01 192 168 13 106 CC Device List in LAN The 6th Device None The 7th Device None The 8th Device None Attention If you want to access the device from internet be sure the host and port that you set can be acces
72. t Ticket Click Add a Host to create a Contact Us domain name Find a Domain Name co a 8 y Get Connected Own a domain name 44 Your No IP Alerts N mo 3 Use your own domain name with our DNS system Add YOR not havo any notices ni Uds Sme Manage Hosts ie domain name now or read more for pricing and Check this spot for important information regarding your eatures account such as expiring services and trouble tickets nome AP a ema Te e 5 Figure 4 28 Please create the domain name step by step according to instructions on www no ip com 46 Step 2 DO DDNS Service Settings within the Camera Please set DDNS Settings within the camera by hostname a user name and password you ve got from www no ip com Take hostname ycxgwp no ip info user name foscam password foscam2012 for example Firstly goes to option of DDNS Settings on the administrator panel Secondly select No lp as a server Thirdly fill foscam as DDNS user fill password foscam2012 as DDNS password fill ycxgwp no ip info as DDNS domain and server URL Then click save to make effect The camera will restart and to take the DDNS settings effective Fourthly after the restart login the camera and go to option of Device Status on the administrator panel and check if the DDNS status is successful If failed please double check if you have input the correct hostname user name and password and try to redo the settings NOTE If you have set T
73. tection area at anytime the camera will capture O Specify an capture schedule Click the week day words the corresponding column will be selected For example click TUE the all column of TUE turns to red that means during Tuesday whole day the camera will capture O Press the left mouse and drag it on the time boxes you can select the serial area 4 Click Save button to take effect 57 www foscam com 4 5 5 IR LED Schedule On this page you can set the schedule time for switching IR LED lights When parameter Mode is set to the Schedule on the Live Video window At these schedule time the IR LED lights will be turned off IR LED Schedule Figure 4 47 4 6 Detector 4 6 1 Motion Detection IP Camera supports Motion Detection Alarm when the motion has been detected it will send emails or upload images to FTP Action Detection Triggered Interval Take Snapshot 7 Time Interval Please set the capture storage location in advance Video gt Snapshot Settings Please set the video storage location in advance Record gt Storage Location 6 08 09 10 11 16 17 a oo on ne TO TA TO on Cn om Figure 4 48 Shenzhen Foscam Intelligent Technology Co Limited Tel 86 755 2674 5668 Fax 86 755 2674 5168 To enable motion detection follow the steps below 1 Enable Motion detection 2 Sensitivity lt supports three modes Low Middle and High The higher the sensitivity the camera will b
74. the camera will remain on this LAN IP address This is very important that a static LAN IP address is set or you may have problems later with remote access and seeing the camera remotely if the camera loses power and reconnects on a different LAN IP address Make sure you set a static LAN IP address 3 Equipment Search Too Camera Name IP Address Device ID Type Anonymous Http 192 168 1 105 2000 O06 26E55AB1E IPC Figure 4 35 NOTE If the camera cannot be accessed please make sure the port forwarding is succeed HTTPS port The default port is 443 You can use the url to access the camera https IP HTTPS port ONVIF port By default the ONVIF port is set to 888 Also they can be assigned with another port number between 1 and 65535 except 0 and 65534 But make sure they can not be conflict with other existing ports RTSP port The default port is 554 only some IP Cameras have RTSP port 4 4 7 Mail Settings If you want the camera to send emails when motion has been detected here Mail will need to be configured m es e z Save Refresh J Enable 4 5 SMTP Server smtp qmail com SMTP Port 25 staRTTLS a Transport Layer Security G Mail only supports TLS at Port 465 and STARTTLS at Port 507 or 25 Need Authentication Yes SMTP Username cuiyao93 gmail com SMTP Password seeeceseeeecs sender E mail First Receiver yaoyao 163 com second Receiver Third Receiver Fourth Rece
75. the replacement limit but still in warranty limit Repair Service Out Of Warranty o FOSCAM provide extra repair service for product that out of warranty it is chargeable The total fee contains device cost and service fee Device cost including accessories is the standard uniform price provide by FOSCAM Different region may have different service fee please contact the point of purchase to confirm that before you ask for this service e Our technicians will quote the total price after detect the product If customers refused to repair after the quotation customers need pay for the test fee 3 5 hour If agree with the quotation test will be free Oo Repaired product out of warranty will obtains 3 month warranty from the date of the product back to customers Limitation of Liability FOSCAM is not responsible for other extra warranty or commitment promised by resellers if your reseller promised some extra commitment or warranty please ask for written documents to protect your rights and interests eo FOSCAM does not offer refunds under any circumstances Please contact the point of purchase and follow their refund return policy eo FOSCAM shall not be liable under any circumstances for any consequential incidental special or exemplary damages arising out of or in any connection with this agreement or the products including but not limited to lost profits or any claim based on indemnity or contribution or the failure of any lim
76. through the web UI in WAN or else the upgrade may be failed 2 Please ensure you have download the correct firmware package for your camera before upgrading Read the upgrade documentation readme txt file in the upgrade package before you upgrade 3 Upon downloading the firmware check the sizes of the bin files They must match the size in the readme txt file If not please download the firmware again until the sizes are the same Your camera will not function correctly if a corrupt bin file is used 4 Normally only Device WEB UI need to be upgrade please do not try to upgrade the Device Firmware 5 Never shut down the power of the camera during upgrade until the IP camera restart and get connected 6 After upgrade successfully please clear the cache of browser uninstall the old plugin and re install it then reset the camera to the default factory settings before using the camera 4 10 3 Patch Installation Click Browse to select the correct patch file and then click Install Patch to install the patch Do not turn off the power during it installing After installing is complete you will receive a system prompt GZ www foscam com Patch Installation E Uninstall Patcn Your camera will reboot when you install uninstall patch Patch Installation Figure 4 71 4 10 4 Factory Reset Click Factory Reset button and all parameters will return to factory settings if selected The default administrator usernam
77. tion alert via email or upload image to FTP Supporting Third Party Domain name Providing Phone APPs for Android and iPhone users Supports multiple network protocols HTTP HTTPS RTSP TCP IP UDP FTP DHCP DDNS UPNP ONVIF Providing Central Management Software to manage or monitor multi cameras Supports 8X optical zoom FI9900P FI9900EP Supports High Dynamic Range FI9900P FI9900EP 949000090909050 94 1 2 PoE Power over Ethernet FlI9805E FI9803EP FI9900EP The Network Camera is PoE compliant allowing transmission of power and data via a single Ethernet cable Such as the following picture connect the Network Camera to a PoE enabled router switch via Ethernet cable gt power data transmission J H 2 AASBTTE 7 Y POE Switch SF vs 1 3 Read Before Use Please first verify that all contents received are complete according to the Package Contents listed below Before the Network Camera is installed please carefully read and follow the instructions in the Quick Installation Guide to avoid damage due to faulty assembly and installation This also ensures the product is used properly as intended 1 4 Packing Contents e Wi Fi Antennax1 except for e Quick Installation Guide x1 FI9805E FI9803EP FI9903P FI9900EP e DC Power Supplyx1 e Warranty Cardx1 e Mounting bracketx1 except for e Network Cablex 1 FI9900P FI9900EP FI9800P gt 1 5 Physical Description 1 5 1 Front Panel
78. to Settings Video IR LED Schedule page Section7 Image quality settings In this page you can tune Hue Brightness Contrast Saturation and Sharpness to get higher quality Color Adjust 0 50 CE E O i 54 50 ha Gm 20 Default Section8 OSD If you have added time and camera name in the video you can see it in the live window Go to Settings Basic settings Camera name panel and you can change another device name The default device name is anonymous Go to Settings Basic settings Camera time panel and adjust the device time Go to Settings Video On Screen Display panel you can add or no add OSD Section9 Play Stop Talk Audio Snap Record Full screen button 1 2 3 4 1 Play Click it to play the video of the camera 2 Stop Click it to stop the video of the camera 3 Talk Click the button and the icon will become to O then talk to the microphone that connected with PC people around the camera can hear your voice if the camera has connected with audio output device Click the icon again and stop talking the camera has connected with other audio input device through the Audio Input port of the camera Click the icon again and stop audio 5 Snap Click it to make snapshot and it pop up a window which picture you snapshot right click in the window and save the picture to anywhere you want Click again and stop recording The default storage path is C IPCam
79. tup will install IPCWebComponents into the following folder To continue click Next If you would like to select a different folder click Browse C Program Files IPCWebCom Browse At least 3 7 MB of free disk space is required Figure 6 3 76 www foscam com Select Start Menu Folder Where should Setup place the program s shortcuts Setup will create the program s shortcuts in the following Start Menu folder To continue click Next If you would like to select a different folder click Browse frcwedcomponents Figure 6 4 gr etup I lek CAR wt LA rw ey y a let DEV oF wU Les Ready to Install Setup is now ready to begin installing IPCWebComponents on your computer Click Install to continue with the installation or click Back if you want to review or change any settings Destination location C Program Files IPCWebComponents Start Menu folder IPCWebComponents Figure 6 5 Shenzhen Foscam Intelligent Technology Co Limited Tel 86 755 2674 5668 Fax 86 755 2674 5168 www foscam com ae ee e Completing the PCWebComponents Setup Wizard Setup has finished installing IPCWebComponents on your computer The application may be launched by selecting the installed icons Click Finish to exit Setup Figure 6 6 6 1 2 Uninstall the ActiveX of Firefox browser Google Chrome and IE Chrome Shenzhen Foscam Intelligent Technology Co Limited Tel 86 755 2674 5668 Fax 86 7
80. twork Connections A Network Tasks Create a new connection itek 0x f Set up a home or small i office network AN Address Type Assigned by DHCP e o shes IP Address 192 168 0 50 es Disable this network Subnet Mask 255 255 255 0 i Default G y 192 168 0 1 Q Repair this connection efault Gateway 168 0 m Rename this connection i lt Click here view status of this connection 2 Change settings of this Windows did not detect problems with this connection connection If you cannot connect click Repair Connection status Other Places G Control Panel ES My Network Places a My Documents E My Computer Details Figure 4 20 Shenzhen Foscam Intelligent Technology Co Limited Tel 86 755 2674 5668 Fax 86 755 2674 5168 www foscam com File Edit View Favorites Tools Advanced Help Q Back z S P Search Key Folders EEE Address Network Connections A LAN or High Speed Internet Network Tasks i 3 Local Area Connection Network Connection Details Connected Firewalled Ane Network Connection Details Set the same Subnet Mask and Property Value ee ee eee hysical Address 00 E0 D0 00 23 01 Odd z 5 U 5U gateway of the camera with your saosin 192 168 0 1 PC 192 168 0 1 Lease Obtained 2010 7 23 17 20 44 Lease Expires 2010 7 23 19 20 44 There are two DNS servers You ES can set any of them Same with gateway is also OK Figure 4 2
81. umbers letters and symbols _ 5 Fl The maximum password length is 63 does not support the character amp Success Figure 4 39 FTP server lf your FTP server is located on the LAN you can set as Figure 4 38 If you have an FTP server which you can access on the internet you can set as Figure 4 39 Port Default is port 21 If changed external FTP client program must change the server connection port accordingly FTP Mode Here supports two modes PORT and PASV Username password The FTP account and password Shenzhen Foscam Intelligent Technology Co Limited Tel 86 755 2674 5668 Fax 86 755 2674 5168 www foscam com Click Save to take effect Click Test to see if FTP has been successfully configured 4 4 9 P2P FI9803P FI9803EP FI9903P FI9900P FI9900EP FI9800P Access the camera by smart phone Android or iOS operating system please refer to the Quick Installation Guide First of all you need to open the P2P function of the camera at Settings gt Network gt P2P Enable P2P Y Figure 4 40 4 5 Video This section allows you to configure Video stream settings On screen display and Snapshot settings 4 5 1 Video Settings There are two ways to set the stream video settings They are main stream video settings and sub stream video settings Shenzhen Foscam Intelligent Technology Co Limited Tel 86 755 2674 5668 Fax 86 755 2674 5168 Setup Wizard x i Video Settings
82. user s authority to operate this equipment This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment This equipment should be installed and operated with minimum distance 20cm between the radiator amp your body This transmitter must not be co located or operating in conjunction with any other antenna or transmitter CE Mark Warning CE This is a Class B product In a domestic environment this product may cause radio interference in which case the user may be required to take adequate measures 6 5 WARRANTY ShenZhen FOSCAM Intelligent Technology Limited FOSCAM values your business and always attempts to provide you the very best of service No limited hardware warranty is provided by FOSCAM unless your FOSCAM product product was purchased from an authorized distributor or authorized reseller Distributors may sell products to resellers who then sell products to end users No warranty service is provided unless the product is returned to an authorized return center in the region where the product was first shipped by FOSCAM or to the point of purchase which may have regional specific warranty implications If you purchase your FOSCAM product from online store please contact the point of purchase and ask for return replacement repair service Hardware Warranty Information FOSCAM provide 2 year limited warranty for naked product and 6 month limited warranty for accessories L
83. ware Connection amp Software Installation Figure 2 1 Mount the antenna and make it stand vertically Only for the device with external antenna Connect the camera to the LAN network Router or Switch via network cable Connect the power adapter to the camera Insert the CD into the CD drive of your computer Go to the folder Equipment Search Tool and find the folder For Windows OS or For Mac OS Copy and vaie the search tool file to your computer or drag it onto your Desktop NANI Notes e If your computer Windows OS supports autorun function you can find the corresponding file in the opened control panel e f your computer doesn t have CD drive you can download the Equipment Search Tool from our website for free 12 2 2 Access the Camera in LAN 2 2 1 Wired connection The camera supports HTTP and HTTPS protocols you can access the camera in two ways 1 Http LAN IP Http Port No The default HTTP port NO is 88 Double click the Search Tool icon to run and it should find the camera s IP address automatically after you plug in the network cable Camera Name IP Address Device ID Type Anonymous Http 192 168 1 105 88 006265E55AB1E IPC Figure 2 2 Double click the IP address of the camera the camera login page should be open in your default browser 2 Https LAN IP Https Port no The default HTTPS port NO is 443 You can use the URL to access the camera htt
84. x Data Rate IEEE802 11g 54Mbps Max IEEE802 11n 150Mbps Max WEP WPA WPA2 P2P DDNS IP TCP UDP HTTP HTTPS SMTP FTP DHCP DDNS UPnP RTSP ONVIF Microsoft Windows 2000 XP Vista 7 8 Mac OS Microsoft IE8 and above version or compatible browser Operating System System Requirements Mozilla Firefox Browser Google Chrome Apple Safari Motion Detection Alarm via E Mail upload alarm snapshot to FTP Privacy Block Set privacy area manually Other Features User Accounts Three levels user role Image adjustment Infrared mode Night visibility Input Output Audio Audio Compression Wireless Standard Wireless Security Network Protocol Firewall Supports IP Filtering Reset Reset button is available Power ot Supply DC 12V 1 0A 5 Watts Max ion LxWxH 98 L x65 W x62 H Physical Net Weight 255g Waterproof O z D s O O mD Nm G 3 3 g 3 D gt O 5 10 C 60 C 14 F 140 F 10 80 non condensing 20 C 60 C 4 F 140 F 0 90 non condensing Environment N N O O a e O o 313 2 9 Ola v O OO Ieee an eee Ij a e e S Ta 3 3 2 alg i33 gt 2 5 3 lt o 2 o0 s C X g D Cc D Certification IC CE WEEE IP66 Warranty Limited 2 year warranty E 90 FI9900EP High Definition Color CMOS Sensor 1920 x 1080 2 0M Pixels O Lux With IR Illuminator Glass Lens f 2 8
85. you install the camera for the first time You can start to learn about software operation after finish quick installation 3 1 Login Window Username admin Password Stream Main stream a 2 Language English v3 s Figure 3 1 Section1 Enter the Username and password The default administrator username is admin with no password please change the password at first using and prevent unauthorized users login the camera Section2 Stream The camera supports two stream modes Main stream and sub stream lf you want to access the camera form LAN here you can select Main stream lf you want to access the camera from Internet here we recommend sub stream Note When the network bandwidth is bad you d better select Sub Stream and the video will be more fluent Section3 Select the language You can select the language you need by clicking on the language dropdown list Section4 login the camera Click Login button NOTE When setting up your camera for the first time it will request that you modify the default username and or password if both are still set to default Input the new username and password click Modify to complete the 21 www foscam com modification You will now use the new username and password to login the camera in the future Confirm the password Figure 3 2 After logging in for the first time you will go to Setup Wizard automatically Here you can set the basic parameters o
86. ysical damage altered either internally or externally improper or inadequate packaging when returned for RMA purposes eo Warranty is void if damage has resulted from accident dismantle abuse or service or modification by someone other than the appointed vendor souse fission or the spare part has been over the period of warranty o Warranty is void if product is damaged due to improper working environment or operation For example improper temperature humidity unusual physical or electrical stress or interference failure or fluctuation of electrical power static electricity using wrong power adapter etc Warranty is void if damaged by the use of parts not manufactured or sold by FOSCAM Damage caused by improper installation of third party products Warranty is void if damaged for irresistible cause such as earthquake fire lightning flood etc Product beyond limited warranty 95 Shipping Fee f products are defective or damaged under normal use or operation in the replacement limit distributors or resellers are responsible for the shipping cost the product back to customers customers should assume the shipping cost send the product to the point of purchase eo During replacement limit if customers ask for replacement due to the product does not fit for customer s personal expectation customers should responsible for both shipping fee Customers shall be responsible for both shipping fee if their product beyond

Download Pdf Manuals

image

Related Search

Related Contents

Bedienungsanleitung  ÍNDICE  GE JB755SJSS Installation Guide    Dental System by 3 shape  PyroGene® Recombinant Factor C Endotoxin Detection System    

Copyright © All rights reserved.
Failed to retrieve file