Land Rover TestBook User Manual - Eng
Contents
1. HARDWARE How to Interpret the Results of the TestBook Integrity Test A series of diagnostics will be run to test the integrity of TestBook hardware A result will appear after each test is finished The tests are described as follows Testing CD Drive Testing LAN Card Checking for Parallel Device Touch BLACK or WHITE to TEST LCD DISPLAY This test attempts to read from the compact disc that is currently in the drive If the CD can be read the message PASSED will appear If Fail or No CD Found appears this may be caused by one of the following conditions There is no CD in the drive press the eject button to make sure The CD is upside down in the caddy The label side should be facing outwards The CD is dirty or scratched see CD Cleaning Procedure The CD is defective Try using another CD If it works replace the defective CD OR the drive may be malfunctioning Check all the above and retry the test For units containing a correctly operating LAN card the message Present will appear Some units do not have a LAN Card so that message is Not Present This does not indicate an error if your unit does not include the LAN card The LAN Local Area Network facility is intended for potential future developments in dealership systems and is not currently in use This test will verify the connection to a printer In many Cases no printer will be connected and the message off line or Not Co2. nnected will appear This is the normal message for a TestBook without a printer OE eon is Pee ONI Plone y plugged into TestBook powered OFF and On Line appear If you have a printer plugged into TestBook and the message Off Line or Not Connected appears check the following Is the printer On Line The light on the printer labelled On Line should be lit If not press the On Line button on the printer If the printer does not become on line try resetting the patel by turning it OFF and then back ON Touch BLACK or WHITE to TEST LCD DISPLAY If an error code appears on the painters see the User s Manual that came with the printer for an explanation of the message Check the cable between TestBook and the printer to make sure it is plugged in securely Check the Configuration Module to make sure TestBook is set up to use the printer The configuration screen is reached by touching Configuration at the Welcome screen See Set Printer Paper in the TestBook Configuration Section of details en the message connected will After the above tests are complete two new buttons will appear on the control panel These buttons labelled Black and White test that the LCD screen is able to display all black or all white When touched a solid black screen or a solid white screen will appear for a few seconds and then go away BLACK Displays a solid black screen WHITE Displays a solid white screen If service ap
3. pears necessary after repeating the test contact the Testbook Help Desk to verify the problem 44
Download Pdf Manuals
Related Search