Mini PTZ Dome Accessories
Contents
1. Figure 4 6 Match Connectors 1 24 VAC power black with 2p connector 2 RS 485 white blue with 2p connector 3 l O multi color with 8p connector 4 Video black with yellow connector 5 3 Cutout for cable Attach the camera to the recess mount by removing the bubble from the camera use the wrench supplied with the Bosch Security Systems Inc Installation Manual F 01U 261 808 1 0 2011 10 12 en Installing a Recessed Mount Mini PTZ Dome Accessories camera and attaching the camera base to the mount using 4 M4 mounting screws with rubber ring supplied with the camera Ensure that the cable is aligned with the cutout in the recess mount 4 Attach the camera base and make the necessary DIP switch settings and then install the bubble See the camera User Manual for details E lo Figure 4 7 Attach Camera to Recess Mount NOTICE The recessed mounting bracket is provided with an additional safety tether point To prevent injury attach a safety wire from a secure anchor point above the ceiling to this tether point 5 Align the trim ring so that the three alignment poles on the trim ring item 1 below align with the three mounting holes in the camera Align the two mounting screws attached to the trim ring item 2 below with the two mounting holes in the recess moun2. F 01U 261 808 1 0 2011 10 Installation Manual Bosch Security Systems Inc Bosch Security Systems Inc 850 Greenfield Road Lancaster PA 17601 U S A www boschsecurity com Bosch Security Systems Inc 2011
3. Advantage Line H Mini PTZ Dome Accessories VEZ 400 In Ceiling Mount BOSCH en Installation Manual Mini PTZ Dome Accessories Table of Contents en 3 Table of Contents 4 1 4 2 4 3 Safety 4 Safety precautions 4 Unpacking 5 Parts List 5 Additional Tools Supplies Required 5 Installation Overview 6 Installing a Recessed Mount 7 Overview 7 Installing the Recessed Mount 7 Installing the Camera to the Recess Mount 11 Connection 14 Bosch Security Systems Inc Installation Manual F 01U 261 808 1 0 2011 10 4 en Safety Mini PTZ Dome Accessories 1 Safety Before installing any of the accessories please read this manual carefully 1 1 Safety precautions WARNING Medium risk Indicates a potentially hazardous situation If not avoided this could result in minor or moderate bodily injury CAUTION Low risk Indicates a potentially hazardous situation If not avoided this could result in property damage or risk of damage to the unit NOTICE This symbol indicates information or a company policy that relates directly or indirectly to the safety of personnel or protection of property F 01U 261 808 1 0 2011 10 Installation Manual Bosch Security Systems Inc Mini PTZ Dome Accessories Unpacking en 5 2 2 1 2 2 Unpacking This equipment should be unpacked and handled with care If an item appears to have been damaged in shipment n
4. a concrete ceiling This following mounting accessories are available and are supplied with separate mounting instructions Wall mount used in applications where the camera is mounted to a vertical wall Pipe mount used in applications where the camera is mounted to a horizontal high ceiling In ceiling mount used in applications where the camera is mounted into a recessed ceiling The installation should be made by qualified installation personnel and conform to the National Electrical Code and applicable local codes F 01U 261 808 1 0 2011 10 Installation Manual Bosch Security Systems Inc Mini PTZ Dome Accessories Installing a Recessed Mount en 7 4 4 1 Installing a Recessed Mount Overview This chapter details how to install a recessed mount for the VEZ 400 Mini PTZ Dome NOTICE The image sensors in modern cameras are highly sensitive and require special care for proper performance and extended lifetime Follow the guidelines for optimum results with your camera Do not expose to direct sunlight or bright spotlights in operating and nonoperating conditions Avoid bright lights in the field of view of the camera Bright lights cause a smearing effect which is visible as white lines above and below the highlight Prolonged exposure to bright lights may cause bleaching of the sensor s color filters This will be visible as colored spots in the picture and is irreversib
5. en 9 ASS E Le E Ella 1 E UN E I amp Figure 4 3 Attach Recess Mount to Ceiling DI DI L Le Figure 4 4 Attach Recess Mount to Ceiling 7 Tighten both clamps to the ceiling using supplied screws and a 2 Phillips screwdriver Bosch Security Systems Inc Installation Manual F 01U 261 808 1 0 2011 10 10 en Installing a Recessed Mount Mini PTZ Dome Accessories gt Figure 4 5 Tighten Mounting Clamps NOTICE Over torquing the ceiling clamps can damage the clamp or ceiling Only tighten the clamp until it contacts the ceiling and you start to feel some resistance If using a power screwdriver set the torque level to the lowest setting F 01U 261 808 1 0 2011 10 Installation Manual Bosch Security Systems Inc Mini PTZ Dome Accessories Installing a Recessed Mount en 11 4 3 Installing the Camera to the Recess Mount To install the camera to the recess mount follow these steps CAUTION All wires for installation applications must be routed through a grounded conduit 1 Route wires on the side of mounting plate with the crescent shaped cut out 2 Connect the cables according to the instructions in the VEZ 400 Installation Manual
6. le 4 2 Installing the Recessed Mount To mount to a recess mount do the following 1 Determine a secure location for the recessed mount supplied separately Figure 4 1 Recess Mount Dimensions Bosch Security Systems Inc Installation Manual F 01U 261 808 1 0 2011 10 8 en Installing a Recessed Mount Mini PTZ Dome Accessories 2 Drill or cut a 7 in hole with a tolerance of 1 8 in 177 8 mm 2 2 mm 3 Optional if installing the camera to a suspended ceiling tile or any other surface where additional support is required the LTC 9349MK mounting kit sold separately is recommended See the instruction book supplied with the mounting bracket for installation instructions Figure 4 2 Mounting bracket 4 Align holes of mounting plate supplied with dome with mounting bracket and attach with screws Ensure that both the crescent shape of the mounting plate and the crescent shape of the mounting bracket are aligned 5 Ensure that the clamping plates are angled inward by pushing up and into the two slots 6 Insert mount through the hole and into the ceiling Slide clamps out and down so that the drywall is clamped in between the clamps and the bracket flange 41 7 mm 1 64 in maximum ceiling thickness and 12 7 mm 0 50 in minimum ceiling thickness F 01U 261 808 1 0 2011 10 Installation Manual Bosch Security Systems Inc Mini PTZ Dome Accessories Installing a Recessed Mount
7. otify the shipper immediately Verify that all the parts listed in the applicable Parts List below are included If any items are missing notify your Bosch Security Systems Sales or Customer Service Representative The original packing carton is the safest container in which to transport the unit and must be used if returning the unit for service Save it for possible future use Parts List The following table lists the parts included in the In ceiling recessed mount VEZ A4 IC Quantity Part 1 In ceiling mount VEZ A4 IC White trim ring with 2 two M3 captive screws Black trim ring with 2 two M3 captive screws Security Torx wrench Installation manual this booklet Ble aja Additional Tools Supplies Required No 2 Phillips screwdriver Appropriate tool for cutting a hole in drywall or ceiling tile if applicable Ain x 4 in junction box optional LTC 9349MK mounting kit optional for recessed mounts VEZ 400 Mini PTZ Dome includes screws to mount the camera Wire Puller tool Suitable mounting screws plugs to attach the wall pipe mount to the mounting surface Bosch Security Systems Inc Installation Manual F 01U 261 808 1 0 2011 10 6 en Installation Overview Mini PTZ Dome Accessories 3 Installation Overview The VEZ 400 Mini PTZ Dome camera comes with the hardware and installation instructions necessary to mount the camera to
8. t F 01U 261 808 1 0 2011 10 Installation Manual Bosch Security Systems Inc Mini PTZ Dome Accessories Installing a Recessed Mount en 13 A LO Figure 4 8 Align Trim Ring 1 Align these three poles with the three mounting holes in the camera 2 Align the mounting screws with the mounting holes in the recess mount 6 Fit the plastic trim ring Use the supplied T 10 Torx wrench to secure the trim ring s two 2 safety locking screws to the mounting bracket Bosch Security Systems Inc Installation Manual F 01U 261 808 1 0 2011 10 14 en Connection Mini PTZ Dome Accessories 5 Connection After the camera is mounted connect the video control and power cables CAUTION Do not connect power to the camera until all other connections are made CAUTION Installation should only be performed by qualified service personnel in accordance with the National Electrical Code or applicable local codes CAUTION All wires for installation applications must be routed through a grounded conduit GPS CAUTION To prevent humidity problems the camera must be installed in dry conditions and the cable leads should be sealed once connected Please refer to the VEZ 400 User Manual for further instructions on camera connections and configuration
Download Pdf Manuals
Related Search