Operating Instructions
Contents
1. items such as newspaper table cloths curtains etc Make sure there is at least 20 cm of space above and at least 5cm of space on each side of the unit Do not place this unit close to strong magnetic fields Do not place the unit on the amplifier or receiver Do not place this unit close to damp areas as the moisture will affect the life of the laser head Should any solid object or liquid fall into the system unplug the system and have it checked by qualified personnel before operating it any further Do not attempt to clean the unit with chemical solvents as this might damage the finish Use a clean dry or slightly damp cloth When removing the power plug from the wall outlet always pull directly on the plug never yank on the cord No naked flame sources such as lighted candles should be placed on the apparatus Changes or modifications to this unit not expressly approved by the party responsible for compliance will void the user s authority to operate the equipment The marking label is pasted on the bottom or back of the equipment NDO NOT INGEST BATTERY CHEMICAL BURN HAZARD The remote control supplied with this product contains a coin button cell battery If the coin button cell battery is swallowed it can cause sever internal burns in just 2 hours and lead to death Keep new and used batteries away from children If the battery compartment does not close securely stop using the product and keep2. SOURCE button on the unit or the i button on the remote control repeatedly to select Bluetooth mode The Bluetooth indicator will flash slowly 2 The system has entered pairing mode OR Press and hold the 11 PAIR button on the remote control to be searchable The Bluetooth indicator will flash rapidly 3 Activate your Bluetooth device and select the search mode OTONE SoundBase will appear on your Bluetooth device list 4 Select OTONE SoundBase in the pairing list The Bluetooth indicator will light up solidly while the pairing succeeds User Manual 5 To disconnect the Bluetooth function switch to another function on the unit or disable the function from your Bluetooth device Tips Enter 0000 for the password if necessary If there is an existing connection press and hold the gt II PAIR button on the remote control to re activate the pairing mode the connection will be interrupted If no other Bluetooth device pairs with this player within two minutes the player will recover its previous connection The player will also be disconnected when your device is moved beyond the operational range Ifyou want to reconnect your device to this player place it within the operational range fthe device is moved beyond the operational range when it is brought back please check if the device is still connected to the player If the connection is lost follow the instructions above to pair your device
3. it away from children If you think batteries might have been swallowed or placed inside any part of the body seek immediate medical attention Correct Disposal Of This Product This marking indicates that this umm Product should not be disposed of with other household wastes throughout the EU To prevent possible harm to the environment or human health from uncontrolled waste disposal recycle it responsibly to promote the sustainable re use of material resources To return your used device please use the return and collection systems or contact the retailer where the product was purchased as they can take this product for environmental safe recycling User Manual Identifying the Parts Main Unit Front view amp SOURCE BASS voL Standby AUX Bluetooth Optical Bass Back view 10 AUX Optical Bluetooth indicator lights up Switch the unit between ON and STANDBY when the unit is in AUX Optical Bluetooth mode mode respectively 2 SOURCE Enable the bass when the bass indicator Select the play function light up 3 BASS 6 AC Socket Enable and disable the bass Connect to power cord 4 VOL VOL 7 AUX R L Socket Increase decrease the volume level Connect to an external audio device 5 Standby AUX Bluetooth Optical BASS 8 OPTICAL Socket Indicators Connect to an external audio device Standby indicator light up red when th
4. OTONE OTONE AUDIO LTD SoundBase Low profile Sound Enhancement User Manual User Manual Contents Important Safety Instructions cussorssossonsnnssnnsnnnsnnsnnnsnnssnnsnnnsnnnsnnsnnnsnnennsnnnsnnnsnnssnnsnsnsnnnsene D Safe M 3 Identifying the Parts sass D Main Unit Remote Control Preparations Prepare the Remote Control Replace the Remote Control Battery sscscsssssscsccesiasscosaisscssseasacscansdestsiaysaccnbiss cessaisbccsousyaasicuatovsstansadeesussucsnadstiesseayavesdeasts 6 Connections Besenses EDU avaeuese eseuses sissa Sasso T d Using the OPTICAL Connection Using the AUX Connection Connect Power Standby ON Select Modes Adjust the Volume Adjust the Bass essere tete tasted teie testi ensi dea iM E A A utt iupe teri irent 9 AUX OPTICAL Operation assesti seeseuee RS m Bluetooth Operation seed Pair Bluetooth enabled Devices Listen to MUSIGHrOM BIUETOOLMIDS VICE sis sssessasseassecasiatissssstvsvousssectcessteizvaisactenststesssbeastsnesssscatcchounisrstnasiantivensstouaneee 10 Troubleshooting cccscsccssscsssssccscsssccscsssccccssscessccsccsscsscssscesessscesessscccecsssscscssecsscssessseseees 10 SPECIFICATIONS
5. a swimming pool and the hazardous radiation exposure or other like unsafe operation Clean only with a dry cloth Toreduce the risk of fire or electric shock 7 Do not block any ventilation openings do not expose this apparatus to rain or Install in accordance with the manufacturer s moisture The apparatus must not be instructions exposed to dripping or splashing and 8 Donotinstall near any heat sources such as ehas s Pipe conte vases radiators heaters stoves or other apparatus MUSENOT OR PACET ol apparatus including amplifiers that produce heat The mains plug appliance coupler is used 9 Do not override the safety purpose of the as the disconnect device the disconnect polarized or grounding plug A polarized plug has two blades with one wider than the other A grounding plug has two blades and a third grounding prong The wide device must remain readily operable Danger of explosion if battery is incorrectly replaced Replace only with the same or equivalent type User Manual Warning The battery batteries or battery pack must not be exposed to excessive heat such as sunshine fire or the like Danger of explosion if battery is incorrectly replaced Replace only with the same or equivalent type Before operating this system check the voltage of this system to see if it is identical to the voltage of your local power supply The ventilation should not be impeded by covering the ventilation openings with
6. any buttons The unit may freeze up during use Switch the unit off and then on again at the mains socket to reset the unit No sound output Make sure that the unit is not muted Press MUTE or VOL to resume normal listening Ensurethe audio setting of the input source e g TV game console DVD player etc is set to PCM mode while using optical connection I can t find the Bluetooth name of this unit on my Bluetooth device for Bluetooth pairing Ensure that the unit is switch on Ensurethat the Bluetooth function is activated on your Bluetooth device The unit has a Bluetooth function that can receive a signal within 8 metres Keep a distance within 8 metres between Specifications General Power requirements M AC220 240V 50 60Hz Power consumption Output power RMS Totalharmonicdlstorti n ae seen 1 1kHz 1W Audio input sensitivity 40Hz 20KHz 653 x 67 x 317 mm Frequency response Main unit W x H x D Speaker Impedance Speaker 30X2 Subwoofer s Remote Control Distance Standard Accessories REMOTECONTOI e x1 User Manual AC Power Cord RCA to 3 5mm audio Cable PE PREAH tA tr M xi Design and specifications are subject to change without notice
7. apparatus Only use attachments accessories specified by the manufacturer Use only with the cart stand tripod bracket or table specified by the manufacturer or sold with the apparatus When a cart or rack is used use caution when moving the cart apparatus combination to avoid injury from tip over Unplug the apparatus during lightning storms or when unused for long periods of time 14 Refer all servicing to qualified personnel Servicing is required when the apparatus has been damaged in any way such as power supply cord or plug is damaged liquid has been spilled or objects have fallen into the apparatus the unit has been 2 Keepthese instructions The safety and exposed to rain or moisture does not operating instructions should be retained operate normally or has been dropped for future reference 15 O This equipment is a Class Il or double 3 Heedall warnings All warnings on the in sulated electrical appliance It has been appliance and in the operating instructions designed in such a way that it does not should be adhered to require a safety connection to electrical 4 Follow all instructions All operating and earth use instructions should be followed Caution 5 Donotusethis apparatus near water Useofcontrols or adjustments or The appliance should not be used near performance of procedures other than water or moisture for example in a wet those described herein may result in basement or near
8. ay back into remote control then screw the cover to lock Precautions Concerning Batteries When the Remote Control is not to be used for a long time more than a month remove the battery from the Remote Control to prevent it from leaking If the batteries leak wipe away the leakage inside the battery compartment and replace the batteries with new ones User Manual Do not heat or disassemble batteries Never throw them in fire or water Donotcarry or store batteries with other metallic objects Doing so could cause batteries to short circuit leak or explode Never recharge a battery unless it is confirmed to be a rechargeable type Connections Using the OPTICAL Connection Remove the protective cap of the OPTICAL socket then connect an OPTICAL cable not included to the TV s OPTICAL OUT socket and the OPTICAL socket on the unit Tip If there is no sound come out of the soundbar and the indicator light flash fast Make sure the audio setting of your source player e g DVD player game player TV is setted to PCM with optical output Using the AUX Connection UseaRCA audio cable included to connect the TV s audio output sockets to the AUX R L socket on the unit SS 00000 Ss em RCA stereo audio cable Usea3 5mm to RCA audio cable included to connect the Portable Player s headphone socket to the AUX R L socket on the
9. e unit is in STANDBY mode User Manual Remote Control 10 Switch the unit between ON and STANDBY mode 2 sS Select the play function 3144 gt gt I Skip to previous next track in Bluetooth mode 4 WK Mute or resume the sound 5 xo Increase decrease the volume level 6 BASS Enable and disable the bass 7 IUPAIR Play pause resume playback in Bluetooth mode Activate the pairing function in Bluetooth mode or disconnect the existing paired Bluetooth device Preparations Prepare the Remote Control The provided Remote Control allows the unit to be operated from a distance Even if the Remote Control is operated within the effective range 6m remote control operation may be impossible if there are any obstacles between the unit and the remote control If the Remote Control is operated near other products which generate infrared rays or if other remote control devices using infra red rays are used near the unit it may operate incorrectly Conversely the other products may operate incorrectly First time use The unit has a pre installed lithium CR2025 battery Remove the protective tab to activate the remote control battery 5009 Screw the cover to unlock then remove the cover Remove the old battery from the battery tray Place a new CR2025 battery into the battery tray with correct polarity as indicated Install the battery tr
10. sisisisedcccsncossassacesncedoosscaesacacsscesienssaceusosensoanseceasectsscosesesussenescnsosussesaacescsesosoosesses D Standard Accessories asiasta sasexass T es 11 User Manual Important Safety Instructions blade or the third prong is provided for your safety If the provided plug does not fit into your outlet ask an electrician to replace the obsolete outlet CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN 10 Protect the power cord from being walked on or pinched particularly at plugs convenience receptacles and at the point CAUTION TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER OR BACK NO USER SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product s enclosure that may be of sufficient magnitude as to constitute a risk of electric shock to persons The exclamation point within an IN equilateral triangle is intended to alert the user to the presence of important operating and maintenance servicing instructions in the literature accompanying the appliance Safety 1 Read these instructions All the safety and operating instructions should be read before this product is operated 11 12 13 where they exit from the
11. the K button on the remote control Press the NK button again or press the J buttons on the unit or the VOL VOL buttons on the remote control to resume normal listening Adjust the Bass During play press the BASS button on the unit or on the remote control enable and disable the bass AUX OPTICAL Operation 1 Ensure that the unit is connected to the TV or audio device 2 Press the SOURCE button on the unit or the i button on the remote control repeatedly to switch between AUX or OPTICAL mode 3 Operate your audio device directly for playback features Press the Volume keys to adjust the volume to your desired level Bluetooth Operation You can listen to tracks from a media device if it is connected to the unit via Bluetooth Pair Bluetooth enabled Devices The first time you connect your bluetooth device to this player you need to pair your device to this player Note The operational range between this player and a Bluetooth device is approximately 8 meters without any object between the Bluetooth device and the unit Before you connect a Bluetooth device to this unit ensure you know the device s capabilities Compatibility with all Bluetooth devices is not guaranteed Any obstacle between this unit and a Bluetooth device can reduce the operational range If the signal strength is weak your Bluetooth receiver may disconnect but it will re enter pairing mode automatically 1 During ON mode Press the
12. to the player again Listen to Music from Bluetooth Device If the connected Bluetooth device supports Advanced Audio Distribution Profile A2DP you can listen to the music stored on the device through the player If the device also supports Audio Video Remote Control Profile AVRCP you can use the player s remote control to play music stored on the device 1 Pair your device with the player 2 Play music via your device if it supports A2DP 3 Use supplied remote control to control play if it supports AVRCP To pause resume play press the gt 11 PAIR button on the remote control To skip to a track press the I 1buttons on the remote control Troubleshooting To keep the warranty valid never try to repair the system yourself If you encounter problems when using this unit check the following points before requesting service No power Ensurethe mains cable is connected securely Make sure that the unit is switched on The remote control does not function Usethe remote control near the unit Point the remote control at the remote control sensor on the unit Replace the battery in the remote control with a new one Remove any obstacles between the remote control and the unit Loud hum or noise is heard The plugs and sockets are dirty Wipe them with a cloth slightly moistened with an appropriate non abrasive cleaning solution User Manual The unit does not respond when pressing
13. unit User Manual me 52 00 3 5mm to RCA stereo audio cable Phone Portable Player Connect Power Caution Risk of product damage Ensure that the power supply voltage corresponds to the voltage printed on the rating label on the back or the underside of the unit Before connecting the AC power cord ensure you have completed all other connections Be sure to unplug the power cord from the outlet when the system is not in use for an extended period of time Connect the power to the AC socket on the unit and a wall outlet General Operation Standby ON When you first connect the unit to the mains socket the unit will be in standby mode and the Standby Indicator will be red Pressthe b button to switch the main unit ON Press the b button again to switch the unit back to STANDBY mode The POWER indicator will light up red Disconnect the mains plug from the mains socket if you want to switch the unit OFF completely If there is no signal under the AUX OPTICAL and BLUETOOTH mode the unit will automatically switch off within 15 minutes Select Modes Press the SOURCE button on the unit or the i button on the remote control repeatedly to switch between AUX OPTICAL and BLUETOOTH modes User Manual Adjust the Volume Press the J buttons on the unit or the VOL VOL buttons on the remote control to adjust the volume Ifyou wish to turn the sound off press
Download Pdf Manuals
Related Search