F-TPBR Touchpad User Manual
Contents
1. POLICE EMERGENCY Press to alert Central Station of a Police Emergency s FIRE EMERGENCY Press to alert Central Station of a Fire Emergency AUXILIARY EMERGENCY Press to alert Central Station of an Auxiliary Emergency E o SIREN Will sound a LOUD steady sweep tone when intrusion is detected or a distinct pulsating tone for a fire alarm condition MOTION SENSOR Detects movement in the premises when armed AWAY Do NOT block N F IFOB The F IFOB is a uniquely coded digital key which must be used to disarm the system and silence the siren in case of alarm To silence an alarm simply insert into the F IFOB slot on the F TPBR Touch pad and remove when alarm has silenced 5 BYPASSING FAULTED ZONES If you are trying to arm with a faulted zone or zones the green READY light will be blinking out the number of the faulted zones If you cannot repair the zone s they may be temporarily removed from the system or bypassed using the fol lowing procedure 1 Press the BYPASS button TBL The F TPBR Touchpad will beep and the yellow Trouble indicator will light ON STEADY 25 STAY Press either the STAY or NIGHT button Warning Bypassed zones are unprotected If a faulted zone cannot be secured have the system checked as soon as possible ARMING WHEN STAYING HOME Arming in the Stay mode allows you to remain home with the perimeter protection active and the interior protection off so that you may move freely ab2. for service 3 NONE Communication The system was not able to report to central station If this is due to a temporary Failure interruption in the telephone service the trouble can be cleared when the service is restored by pressing DISARM SILENCE again 4 NONE Telephone Line Cut The telephone line has failed If telephone service has been temporarily interrupted the trouble will clear when restored Otherwise call for service NONE Bell Siren Trouble There is a problem with the Bell or Siren Call for service 14 SYSTEM TROUBLE ERROR CODES TBL Flashes This is a reminder that the system has been put into the lost key mode STAY amp AWAY pressed simultaneously While in this mode the system can only be disarmed NONE Rest Key Mode with your F IFOB When you have replaced or re keyed your deadbolt press STAY amp Away simultaneously again to exit lost key mode 7 NONE Fire Zone Trouble A problem has been detected with the Fire zone Call for service Wireless Receiver A 1 1 TBL or Touch A problem has been detected with the wireless receiver or F TP Touchpad Call for ser vice pad TBL ci es DEED ee A problem has been detected with a wireless receiver Call for service The battery in a wireless transmitter is low and should be replaced This transmitter is on the zone corresponding to the number of READY flashes The replacement battery for the GEM TRANS2 door window transmitte
3. technician for help You may also find the helpful the following booklet prepared by the FCC How to Identify and Resolve Radio TV Interference Problems This booklet is available from the U S Government Printing Office Washington DC 20402 Changes and Modifications not expressly approved by the manufacturer or registrant of this equipment can void your authority to operate this equipment under Federal Communications Commissions rules This device complies with part 15 of FCC Rules Operation is subject to the following two conditions 1 This device may not cause harmful interference and 2 this device must accept any interference received including interference that may cause un desired operation This Class B digital apparatus complies with Canadian ICES 003 Cet appareil num rique de la classe B est conforme la norme NMB 003 du Canada NOTES lt 333 Bayview Avenue Amityville New York 11701 For Sales and Repairs 800 645 9445 For Technical Service 800 645 9440 Publicly traded on NASDAQ Symbol NSSC NAPCO 2005
4. 44 Using your NAPCO FREEDOM F TPBR Touchpad Home Security System INTRODUCTION Congratulations your purchase of a new Deadbolt Activated Freedom Security System This revolutionary new concept in residential security makes using your system easier than ever before possible because the system uses its computerized control panel to continually monitor the status of your entry door and deadbolt It actually anticipates what command it should expect from you next simply requiring just one button to press to effortlessly operate your security system whether you re going returning or staying in for the night Now everyone in your family young and old alike will enjoy the true peace of mind you would expect from a quality state of the art Security System without the fuss of re membering confusing numerical codes to operate it Simplicity and convenience begin with your System s one touch STAY or AWAY but tons then just lock or unlock the door as usual Day in and day out that s all there is to it This booklet contains important infor mation about the operation of your NAPCO Freedom Security System Please read it through and retain it for handy reference Because your system is custom ized for your home and lifestyle you may find subjects mentioned here that don t ap ply to your system Rest assured your secu rity system has been configured by your Se curity Professiona
5. e system is ready to arm if the green READY light is BLINKING this indicates that a zone is faulted The READY light is blinking out the zone number of the open zone Count the flashes and look at your zone list to see which zone is open and secure it close the door or window etc If you cannot immediately secure the zone it may be bypassed see page 6 if the green READY light is OFF the deadbolt is not locked The Touchpad deadbolt must be locked before the system can be armed Go to the Touchpad and lock the deadbolt Press the NIGHT button The ARMED indicator will light and STAY will begin to flash indicating the system is armed in the Night mode To Arm in Night Mode from Stay Mode If already armed Stay mode STAY and ARMED indicator will light steady To arm in Night mode from Stay mode press the NIGHT button The READY light will turn on momentarily then the STAY indica tor will flash yellow and the ARMED indicator will light steady EMERGENCY BUTTONS Emergency Buttons Only available if programmed or disarmed The Emergency Button must be Held Down for 3 seconds to activate the The Emergency Buttons if programmed are always active whether the system is armed emergency alarm and transmit the signals to central station Police Emergency Hold down the Police Emergency button to alert the central station of a police emergency Police Emergency programmed ONO Fire Emergency Hold do
6. e zone s on which the alarm occurred De termine which zone caused the alarm and then press DISARM SILENCE to clear the alarm memory If an alarm occurs while you are away ARMED When you unlock the deadbolt to enter the Touchpad sounders will activate and the red ARMED light will be flashing to warn you that an alarm had occurred while you were away Proceed with caution If you suspect that an intruder may still be on the premises leave immediately and call authorities from a neighbor s phone To disarm the system you must insert your F IFOB key into the F IFOB slot on the F TP Touchpad ca c or F TPBR Touchpad If the system is not disarmed in 30 seconds the alarm will sound The red ARMED light will continue to flash the number of the zone s on which the alarm occurred Deter ARMED mine which zone caused the alarm and then press DISARM SILENCE to clear the alarm memory FIRE PROTECTION If a fire is detected the siren will sound a distinct pulsating tone and the FIRE indicator on the F TPBR Touchpad will be flashing If a Fire Alarm does occur FIRE Note This feature may not apply to your system Consult your installer to determine if your system includes fire protection 1 If a fire is in progress evacuate the premises immediately Call the Fire Department from an outside phone If there is no evidence of a fire press DISARM SILENCE OR insert your F IFOB key into the F TPBR DISARM Touchpad SILENCE a
7. has occurred count the number of ARMED light flashes and refer to the list below to see which zone caused the alarm ZONE 1 ZONE 2 ZONE 3 ZONE 4 ZONE 5 ZONE 6 ZONE 7 ZONE 8 FEDERAL COMMUNICATIONS COMMISSION FCC Part 68 STATEMENT This equipment complies with Part 68 of the FCC rules On the front cover of this equipment is a label that contains among other information the FCC registration number and ringer equivalence number REN for this equipment If requested this information must be provided to the telephone company This equipment uses the following jacks An RJ31 X is used to connect this equipment to the telephone network The REN is used to determine the quantity of devices which may be connected to the telephone line Excessive IRENs on the telephone line may result in the devices not ringing in response to an incoming call in most but not all areas the sum of the RENs should not exceed five 5 0 To be certain of the number of devices that may be connected to the line as determined by the total RENs contact the telephone company to determine the maximum REN for the calling area If this equipment causes harm to the telephone network the telephone company will notify you in advance that temporary discon tinuance of service may be required If advance notice is not practical the telephone company will notify the customer as soon as possible Also you will be advised of your right to file a complaint with the FCC if y
8. l to best suit you and the system itself has been meticulously designed and engineered to the highest industry stan dards Please test your system at least once a week as described below IMPORTANT TEST YOUR SYSTEM WEEKLY 1 Test your siren and central station communicator From a Ready Condition Disarmed State Hold Down the BYPASS button for 4 seconds until the F BYPASS TPBR Touchpad beeps The system will generate a test report to central station and two momentary chirps beep 2 Test your motion sensors and other protective devices Hold Down the BYPASS button for 8 seconds until the second hold down of the siren f the siren does not sound or sounds week call for service f the system indicates a low battery system trouble trouble light TBL flashing 2 times call for service f the system indicates a communication failure system trouble TBL flashing 3 times call for service The communication failure system trouble may take a few minutes to appear A subsequent press of the DISARM SILENCE button will silence the trouble indication e Walk through the areas protected by motion sensors The F TPBR Touchpad will beep when the zone is violated and again when the zone is restored Open and close all protected doors and windows and listen for the corre sponding F TPBR Touchpad beeps After testing the protective devices the F TPBR Touchpad ARMED indica tor will flash out the zo
9. low the exclusion or limitation of incidental or consequential damages or differentiate in their treatment of limitations of liability for ordinary or gross negligence so the above limitations or exclusions may not apply to you This Warranty gives you specific legal rights and you may also have other rights which vary from state to state THE FOLLOWING STATEMENT IS REQUIRED BY THE FCC RADIO AND TELEVISION INTERFERENCE This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference in a residential installation This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instruc tions may cause harmful interference to radio communications However there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception which can be determined by turning the equipment off and on the user is encouraged to try to correct the interference by one or more of the following measures Reorient or relocate the receiving antenna Increase the separation between the equipment and the receiver Connect the equipment into an outlet on a circuit different from that to which the receiver is connected Consult the dealer or an experienced radio TV
10. m The siren will silence and FIRE on the F TPBR Touchpad will stop flashing and light steady Determine which device went into alarm If you are protected by smoke detectors the light on the SILENCE SILENCE to reset the smoke detector If the Fire Zone has reset properly the FIRE light should go out in approximately 30 seconds If it FIRE does not go out press DISARM SILENCE again in a few minutes If it still does not go out call for service 3 PISARM active detector will be lit Once it is determined which smoke detector is in alarm press DISARM Fire Zone Trouble The system is constantly monitoring the Fire Zone to insure the connections to the protective de vices are in good working order problem on a Fire Zone is detected a System Trouble will display The sounder will activate and the Trouble TBL light will blink 7 times Press the DISARM SILENCE button to silence the sounder Call for service immediately FIRE PROTECTION Preparing a Fire Escape Plan Even with the most advanced fire alarm system adequate protection requires an escape plan To prepare your plan draw floor plans of your building Show two exits a front or back door and a window from each room Make sure the window works You may need a special fire escape ladder if the window is high up Write down your outside meeting place Family Rehearsal Rehearse each of the following activities 1 Everyone in his room with the door
11. ne number of all zones which have been activated Press the DISARM SILENCE button to clear the display and end the test If any devices fail to respond when activated or register on the F TPBR Touchpad display as described above call for service TABLE OF CONTENTS TABLE OF CONTENTS INTRODUCTION TESTING THE SYSTEM F TPBR TOUCHPAD INDICATORS F TPBR TOUCHPAD CONTROLS BYPASSING FAULTED ZONES ARMING WHEN STAYING HOME ARMING AT NIGHT EMERGENCY BUTTONS DISARMING THE SYSTEM SILENCING AN ALARM FIRE PROTECTION SYSTEM TROUBLE ERROR CODES ZONE LIST FCC PART 68 STATEMENT LIMITATIONS OF THIS ALARM SYSTEM LIMITED WARRANTY FCC PART 15 STATEMENT 44 IF THE ALARM IS SOUNDING To silence an alarm in sert your F IFOB key into the slot on the F TPBR Touchpad and remove when alarm has si E n n lenced Proceed with caution See pages 11 amp 12 ALARM TIME OUT Minutes FOR SERVICE CALL TO CANCEL AN ALARM REPORT CALL F TPBR TOUCHPAD INDICATORS The green READY light shows the status of the zones in your system ON indicates that all zones are secure and the system is ready to be armed FLASHING indicates that at least one zone is open To determine the open zone count the number of flashes and refer to the zone list on your security panel OFF indicates that the optional second deadbolt is not locked If there are two deadbolts in the system the other deadbolt must be locked before
12. nents could fail at any time The most common cause of an alarm system not functioning when an intrusion occurs is inadequate maintenance This alarm system should be tested weekly to make sure all sensors and transmitters are working properly Wireless transmitters used with some systems are designed to provide long battery life under normal operating conditions Lon gevity of batteries may be as much as 4 to 7 years depending on the environment usage and the specific wireless device being used External factors such as humidity high or low temperatures as well as large swings in temperature may all reduce the ac tual battery life in a given installation This wireless system however can identify a true low battery situation thus allowing time to arrange a change of battery to maintain protection for that given point within the system Installing an alarm system may make one eligible for lower insurance rates but an alarm system is not a substitute for insurance Business owners property owners and renters should continue to act prudently in protecting themselves and continue to insure their lives and property We continue to develop new and improved protection devices Users of alarm systems owe it to themselves and their employees to learn about these developments NAPCO LIMITED WARRANTY NAPCO SECURITY SYSTEMS INC NAPCO warrants its products to be free from manufacturing defects in materials and workmanship for thirty six mo
13. nths following the date of manufacture NAPCO will within said period at its option repair or replace any product failing to operate correctly without charge to the original purchaser or user This warranty shall not apply to any equipment or any part thereof which has been repaired by others improperly installed improperly used abused altered damaged subjected to acts of God or on which any serial numbers have been altered defaced or removed Seller will not be responsible for any dismantling or reinstallation charges THERE ARE NO WARRANTIES EXPRESS OR IMPLIED WHICH EXTEND BEYOND THE DESCRIPTION ON THE FACE HEREOF THERE IS NO EXPRESS OR IMPLIED WARRANTY OF MERCHANTABILITY OR A WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE ADDITIONALLY THIS WARRANTY IS IN LIEU OF ALL OTHER OBLIGATIONS OR LIABILITIES ON THE PART OF NAPCO Any action for breach of warranty including but not limited to any implied warranty of merchantability must be brought within the six months following the end of the warranty period IN NO CASE SHALL NAPCO BE LIABLE TO ANYONE FOR ANY CONSEQUENTIAL OR INCIDENTAL DAMAGES FOR BREACH OF THIS OR ANY OTHER WARRANTY EXPRESS OR IMPLIED EVEN IF THE LOSS OR DAMAGE IS CAUSED BY THE SELLER S OWN NEGLIGENCE OR FAULT In case of defect contact the security professional who installed and maintains your security system In order to exercise the warranty the product must be returned by the security professional shipping costs
14. ou believe necessary The telephone company may make changes in its facilities equipment operations or procedures that could affect the operation of the equipment If this happens the telephone company will provide advance notice in order for you to make the necessary modifi cations in order to maintain uninterrupted service If trouble is experienced with this equipment please contact the manufacturer for repair and warranty information If the trouble is causing harm to the telephone network the telephone company may request you remove the equipment from the network until the problem is resolved There are no user serviceable components in this product and all necessary repairs must be made by the manufacturer Other repair methods may invalidate the FCC registration on this product This equipment cannot be used on telephone company provided coin service Connection to Party Line Service is subject to state tariffs This equipment is hearing aid compatible When programming or making test calls to an emergency number briefly explain to the dispatcher the reason for the call Perform such activities in the off peak hours such as early morning or late evening WARNING THE LIMITATIONS OF THIS ALARM SYSTEM While this system is an advanced design security system it does not offer guaranteed protection against burglary or fire or other emergency Any alarm system whether commercial or residential is subject to compromise or fail
15. out the premises Check the F TPBR Touchpad indicators The green READY light should be ON STEADY indicating 1 MAUS that the system is ready to arm if the green READY light is BLINKING this indicates that a zone is faulted The READY light is blinking out the zone num ber of the open zone Count the flashes and look at your zone list to see which zone is open and secure it close the door or window etc If you cannot immediately secure the zone it may be bypassed see page 6 ifthe green READY light is OFF the deadbolt is not locked The Touchpad deadbolt must be locked before the system can be armed Go to the Touchpad and lock the deadbolt Press the STAY button 2 STAY The STAY and ARMED indicator will light steady indicating the system is armed in the Stay mode STAY To Arm in Night Mode from Stay Mode If already armed Stay mode STAY and ARMED indicator will light steady To arm in Night mode from Stay mode press the NIGHT button The READY light will turn on momentarily then the STAY indicator will flash yellow and the ARMED indicator will light steady ARMING AT NIGHT Arming in the Night mode allows you to remain home with all perimeter AND interior protection active except for the F TPBR Touchpad PIR If the F TPBR Touchpad is located in the bedroom you may move about the bedroom freely Check the F TPBR Touchpad indicators The green READY light should be ON STEADY indicating 1 54 7 8 that th
16. part of the optical system can reduce their detection ability Passive Infrared Detectors sense changes in temperature however as the ambient temperature of protected area ap proaches the temperature range of 90 to 105 F 32 to 40 C the detection performance can decrease Alarm warning devices such as sirens bells or horns may not alert people or wake up sleepers if they are located on the other side of closed or partly open doors If warning devices sound on a different level of the premises then they are less likely to alert all people Persons may not hear the warning if the alarm is muffled from a stereo radio air conditioner or other appli ance or by passing traffic Finally alarm warning devices however loud may not warn hearing impaired people Telephone lines needed to transmit alarm signals from a premises to an alarm monitoring center may be out of service or temporarily out of service Telephone lines are also subject to compromise by sophisticated intruders continued WARNING THE LIMITATIONS OF THIS ALARM SYSTEM Cont d e Even if the system responds to the emergency as intended however occupants may have insufficient time to protect them selves from the situation In the case of a monitored alarm system authorities may not respond appropriately e This equipment like other electrical devices is subject to component failure Even though this equipment is designed to last as long as 10 years the electronic compo
17. prepaid and insured to NAPCO After repair or replacement NAPCO assumes the cost of returning products under warranty NAPCO shall have no obligation under this warranty or otherwise if the product has been repaired by others improperly installed improperly used abused altered damaged subjected to accident nuisance flood fire or acts of God or on which any serial numbers have been altered defaced or removed NAPCO will not be responsible for any dismantling reassembly or reinstallation charges This warranty contains the entire warranty It is the sole warranty and any prior agreements or representations whether oral or written are either merged herein or are expressly cancelled NAPCO neither assumes nor authorizes any other person purporting to act on its behalf to modify to change or to assume for it any other warranty or liability concerning its products In no event shall NAPCO be liable for an amount in excess of NAPCO s original selling price of the product for any loss or damage whether direct indirect incidental consequential or otherwise arising out of any failure of the product Seller s warranty as hereinabove set forth shall not be enlarged diminished or affected by and no obligation or liability shall arise or grow out of Seller s rendering of technical advice or service in connection with Buyer s order of the goods furnished hereunder NAPCO RECOMMENDS THAT THE ENTIRE SYSTEM BE COMPLETELY TESTED WEEKLY Wa
18. r GEM PIR motion detector and GEM GB us E glass break detector is the Duracell DL123A 3 Volt Lithium 2 required for the GEM PIR and GEM GB The GEM DT Dual Technology Sensor requires 4 C cell Alkaline batter ies Warning Replace batteries only with the same type as specified above Use of another battery may present a risk of fire or explosion Do not recharge or disassemble battery or dispose of in fire 4 1 8 Wireless Transmitter A problem has been detected with a wireless transmitter on the zone corresponding to Supervisory Failure the number of READY flashes Call for service The battery in a wireless smoke detector is low and should be replaced The number of the smoke detector corresponds to the number READY flashes The replacement battery is the Duracell MN1604 9 Volt Alkaline 2 required Warning Replace batteries only with the same type as specified above Use of another battery may present a risk of fire or explosion Do not recharge disassemble or dispose of battery in a fire Wireless Smoke Detector Low Battery Wireless Smoke Detector Supervisory A problem has been detected with a wireless smoke detector Call for service Failure ZONE LIST The space below is for recording the descriptions of the zones in your system e f the system has a faulted zone count the number of READY light flashes and refer to the list below to see which zone is open and secure it close the door or window etc If an alarm
19. rning Despite frequent testing and due to but not limited to any or all of the following criminal tampering electrical or communications disruption it is possible for the system to fail to perform as expected NAPCO does not represent that the product system may not be compromised or circumvented or that the product or system will prevent any personal injury or property loss by burglary robbery fire or otherwise nor that the product or system will in all cases provide adequate warning or protection A properly installed and maintained alarm may only reduce risk of burglary robbery fire or otherwise but it is not insurance or a guarantee that these events will not occur CONSEQUENTLY SELLER SHALL HAVE NO LIABILITY FOR ANY PERSONAL INJURY PROPERTY DAMAGE OR OTHER LOSS BASED ON A CLAIM THE PRODUCT FAILED TO GIVE WARNING Therefore the installer should in turn advise the consumer to take any and all precautions for his or her safety including but not limited to fleeing the premises and calling police or fire department in order to mitigate the possibilities of harm and or damage NAPCO is not an insurer of either the property or safety of the user s family or employees and limits its liability for any loss or damage including incidental or consequential damages to NAPCO s original selling price of the product regardless of the cause of such loss or damage Some states do not allow limitations on how long an implied warranty lasts or do not al
20. s always ready to provide the protection for which it was designed When a system trouble occurs the F TPBR Touchpad will caution you with a Trouble TBL light and a beeping sounder If you cannot immediately fix the trouble the system can still be used Simply press DISARM SILENCE to view the trouble as de scribed below and press DISARM SILENCE again to exit the VIEW TROUBLE mode The system can now be armed To view the trouble press DISARM SILENCE count the number of Trouble TBL and READY flashes and refer to the following table If there is more than one trouble to view press DISARM SILENCE again to scroll to the next trouble and again to exit the VIEW TROUBLE mode The Trouble TBL light will remain pulsing as a reminder if the trouble is still present NOTE If F TPBR Touchpad siren chirps once every 10 seconds call for service TBL Flashes STEADY NONE Zones Bypassed This is a reminder that zones have been bypassed by pressing BYPASS If it is necessary to bypass any inoperative zones it is important to have the zones re paired as soon as possible NONE AC Power Failure This trouble will occur if AC power is not present Make sure the system trans former is plugged into its AC receptacle and check the circuit breaker otherwise call for service 2 NONE Low Battery If there has been a recent power failure the battery may be partially depleted and must be recharged by the control panel If the trouble does not clear in 24 hours call
21. s closed One person sounds the alarm Each person tests his door Pretend the door is hot and use the alternate escape exit Everyone meets outdoors at the assigned location Important Read Carefully Discuss these escape procedures with all those who use the building 1 In aresidence sleep with the bedroom door closed A closed door will hold back deadly smoke while you escape When the fire alarm signals escape quickly Do not stop to pack 3 Test the door If it is hot use Would You Like More Safety Information your alternate route through the window If the door is cool brace your shoulder against it and open it cautiously Be ready to slam the door if smoke or heat rushes in Crawl through smoke holding your breath Close the doors again on leaving to help prevent the fire from spreading Goto your specific outdoor meeting place so you can see that everyone is safe Assign someone to make sure nobody returns to the burning building Call the Fire Department from a neighbor s telephone For more information on home fire detection burn safety and home fire safety write to the National Fire Protection Association Public Affairs Dept 05A Batterymarch Plaza Quincy MA 02269 SYSTEM TROUBLE ERROR CODES Your NAPCO Freedom Security System is constantly monitoring its own components as well as all critical services such as AC power and the telephone line to insure that it i
22. the system can be armed The red ARMED light ON indicates that the system is armed BLINKING with the siren sounding indicates that the system is in alarm BLINKING with no siren indicates Alarm Memory the alarm has been silenced or timed out To determine the zone in alarm count the number of flashes and refer to the zone list on your security panel Press DISARM SILENCE to clear the alarm memory see page 11 The yellow STAY light BLINKING indicates that the system is armed in the NIGHT mode allow ing free movement only in the vicinity of the F TPBR Touchpad while maintaining perimeter pro tection The yellow STAY light STEADY indicates Armed Stay with all interior protection off all perimeter protection on This allows free movement inside the interior of the premises The red FIRE light will flash to indicate that the system is in a Fire Alarm Condition If a fire is in progress evacuate the premises immediately Note This feature may not apply to your system Consult your installer to determine if your system includes fire protection The yellow trouble TBL light will light and the F TPBR Touchpad sounder will pulse to indicate that a system trouble is present If zone s have been bypassed TBL will light steadily See SYSTEM TROUBLE ERROR CODES Page 14 The green AC Light ON indicates that AC Power is present 4 F TPBR TOUCHPAD CONTROLS STAY Button Press to arm system in the STAY mode Perimeter devices such as
23. ure to warn for a variety of rea sons For example Intruders may gain access through unprotected openings or have the technical sophistication to bypass an alarm sensor or disconnect an alarm warning device Intrusion detectors e g passive infrared detectors smoke detectors and many other sensing devices will not work without power Battery operated devices will not work without batteries with dead batteries or if the batteries are not put in properly Devices powered solely by AC will not work if their AC power supply is cut off for any reason however briefly Signals sent by wireless transmitters may be blocked or reflected by metal before they reach the alarm receiver Even if the signal path has been recently checked during a weekly test blockage can occur if a metal object is moved into the path A user may not be able to reach a panic or emergency button quickly enough Passive Infrared Motion Detectors can only detect intrusion within the designed ranges as diagrammed in their installation manual Passive Infrared Detectors do not provide volumetric area protection They do create multiple beams of protection and intrusion can only be detected in unobstructed areas covered by those beams They cannot detect motion or intrusion that takes place behind walls ceilings floors closed doors glass partitions glass doors or windows Mechanical tampering mask ing painting or spraying of any material on the mirrors windows or any
24. windows and doors will be protected while interior protective devices such as motion sensors will be de activated allowing free movement throughout the premises NIGHT Button Press to arm system in NIGHT mode when going to sleep System will be fully armed with all perimeter and interior devices activated except for the F TPBR Touchpad PIR BYPASS Button This button has multiple functions depending on the state of the panel BYPASS If you are attempting to arm the system with open zones that cannot be immediately repaired press BYPASS to tempo rarily remove these zones from the system The F TPBR Touchpad will beep and trouble TBL will light steady Press STAY or NIGHT to arm the system as usual see page 6 TEST To test the system hold down the BYPASS button for 4 seconds to generate a test report to central station and chirp the siren If the test fails the F TPBR Touchpad will beep and the trouble light TBL will flash Hold down BYPASS for 8 seconds to do a system walk test of your protective devices Press DISARM SILENCE to reset See page 2 DISARM SILENCE Button Press to silence a Fire Alarm page 12 silence system troubles and view system troubles page 14 If system is armed NIGHT or STAY from the F TPBR Touchpad pressing DISARM SILENCE will disarm the system Note This feature may not apply to your system Consult your installer to determine if your system includes fire protection EMERGENCY BUTTONS
25. wn the Fire button to alert the central station of a fire emergency Fire Emergency programmed ONO Auxiliary Emergency Hold down this button to alert the central station of an auxiliary emergency Auxiliary Emergency programmed ONO Auxiliary Emergency DISARMING THE SYSTEM DISARM 7 Disarming when home Armed Night or Stay a To disarm the system press the DISARM SILENCE button on the F TPBR Touchpad This function is available only when armed in the Night mode or Stay mode e If the system is armed the Away mode interior fully protected pressing the DISARM SILENCE button will not only fail to disarm the system but pressing ANY button when armed Away will instantly generate an alarm The system may also be disarmed at any time with the F IFOB To disarm the system insert your F IFOB key into the IFOB slot on the F TP Touchpad or F TPBR Touchpad and remove when the system is disarmed SILENCING AN ALARM If an alarm occurs while you are at home The Touchpad sirens will sound and the red ARMED light will flash Proceed with caution If you suspect that an intruder may still be in the premises leave immediately and call authorities from a neighbor s telephone To silence the alarm insert your F IFOB key into the IFOB slot on the F TP Touchpad or F TPBR Touchpad and remove when alarm has silenced ARMED The red ARMED light will continue to flash the number of th
Download Pdf Manuals
Related Search