ELED TW Strip User Manual
Contents
1. 11 12 PROFESSIONAL ELED TW Strip User Instructions ELED TW Strip Introduction Unpacking Thank you for purchasing the ELED TW Strip by Ela tion Professionale Every ELED TW Strip has been thoroughly tested and has been shipped in perfect operating condition Carefully check the shipping carton for damage that may have occurred during ship ping If the carton appears to be damaged carefully inspect your fix ture for any damage and be sure all accessories necessary to operate the unit has arrived intact In the case damage has been found or parts are missing please contact our customer support number for further instructions Do not return this unit to your dealer without first contact ing customer support Introduction The ELED TW Strip is part of Elation Professionalse continuing pursuit for creating high quality affordable intelligent fix tures The ELED TW Strip is a powerful DMX intelligent 3 in 1 WW CW A Cool White Warm White amp Amber LED strip This unit can has 4 operating modes Macro mode Program mode WW CW A mode and DMX controlled This unit can be used as a single stand alone unit or used in a master slave configuration Customer Support eElatione provides a customer support line to provide set up help and to answer any question should you encounter problems during your set up or initial operation You may also visit us on the web at www elationlighting com for any comments or sugges tions Ser2. D K TOTAL WHI LUX 3938 3739 T K 3625 128 3226 3361 ses 6022 3938 3739 3625 Elation Professional www elationlighting com ELED TW Strip Instruction Manual Page 16 ELED TW Strip With this feature you can connect the fixtures to one another using the powercon input and output sockets The quantity that can be connected is 6 fixtures maximum After 6 fixtures you will need to use a new power outlet They must be the same fixtures DO NOT mix fixtures Power Cord Daisy Chain ELED TW Strip First unplug the power The fuse holder is located next to the power inlets Using a flat head screw driver unscrew the fuse holder Remove the bad fuse and replace with a new one Fuse Replacement ELED TW Strip Due to fog residue smoke and dust cleaning the internal and exter nal optical lenses must be carried out periodically to optimize light output Cleaning 1 Use normal glass cleaner and a soft cloth to wipe down the outside casing 2 Clean the external optics with glass cleaner and a soft cloth every 20 days 3 Always be sure to dry all parts completely before plugging the unit back in Cleaning frequency depends on the environment in which the fixture operates i e smoke fog residue dust dew ELED TW Strip Listed below are a few common problems the user may encounter with solutions Trouble Shooting Unit not responding to DMX 1 Check that the DMX cables are
3. Weight 21 Ibs 9 5 kgs Dimensions 40 25 L x 8 5 W x 9 H 1019 x 210 x 226mm Colors WW CW A Color Mixing DMX Channels 8 DMX Channel Modes 1 Channel Mode 2 Channel Mode 3 Channel Mode 4 Channel Mode 6 Channel Mode 7 Channel Mode 27 Chan nel Mode amp 54 Channel Mode Warranty 2 Year 730 days Auto Sensing Voltage This fixture contains a automatic voltage switch which will auto sense the voltage when it is plugged into the power source Please Note Specifications and improvements in the design of this unit and this manual are subject to change without any prior written notice Elation Professional www elationlighting com ELED TW Strip Instruction Manual Page 19 Elation Professionals 6122 S Eastern Ave Los Angeles CA 90040 USA Tel 323 582 3322 Fax 323 832 9142 Web www elationlighting com E mail info elationlighting com A D J Supply Europe B V Junostraat 2 6468 EW Kerkrade Netherlands service adjgroup eu www americandj eu Tel 31 45 546 85 00 Fax 31 45 546 85 99
4. Channel DMX is displayed This is the DMX addressing for the 1 Channel Mode To run the 2 Channel Mode press the MODE button until 2 Channel DMX is displayed This is the DMX addressing for the 2 Channel Mode To run the 3 Channel Mode press the MODE button until 3 Channel DMX is displayed This is the DMX addressing for the 3 Channel Mode To run the 4 Channel Mode press the MODE button until 4 Channel DMX is displayed This is the DMX addressing for the 4 Channel Mode To run the 6 Channel Mode press the MODE button until 6 Channel DMX is displayed This is the DMX addressing for the 6 Channel Mode To run the 7 Channel Mode press the MODE button until 7 Channel DMX is displayed This is the DMX addressing for the 7 Channel Mode To run the 27 Channel Mode press the MODE button until 27 Channel DMX is displayed This is the DMX addressing for the 27 Channel Mode To run the 54 Channel Mode press the MODE button until 54 Channel DMX is displayed This is the DMX addressing for the 54 Channel Mode Please see pages 11 15 for DMX values and traits Elation Professional www elationlighting com ELED TW Strip Instruction Manual Page 9 ELED TW Strip Master Slave Configuration Master Slave Operation This function will allows you to link units together to run in a Master Slave mode In Master Slave operation one unit will act as the controlling unit and the others will react to th
5. HITE AMBER LED PATTERN CONTINUES THE DIRECTION IN WHICH THE PIXELS LIGHT UP CAN BE SWITCHED USING THE DIRECTION SET FEATURE ON PAGE 8 20 WARM WHITE LED 13 amp 14 2 o ass AMBER LED 138 14 096 10096 COOL WHITE LED 15 amp 16 096 10096 WARM WHITE LED 15 8 16 096 10096 AMBER LED 15 8 16 096 10096 COOL WHITE LED 17 8 18 096 10096 WARM WHITE LED 17 8 18 096 10096 AMBER LED 17 8 18 096 10096 Elation Professional www elationlighting com ELED TW Strip Instruction Manual Page 14 ELED TW Strip 54 Channel Mode COOL WHITE LED 1 096 10096 WARM WHITE LED 1 096 10096 AMBER LED 1 096 10096 COOL WHITE LED 2 096 10096 WARM WHITE LED 2 096 10096 AMBER LED 2 096 10096 COOL WHITE LED 3 096 10096 WARM WHITE LED 3 096 10096 CHANNELS 9 19 THE SAME WARM WHITE COOL WHITE AMBER LED PATTERN CONTINUES XTHE DIRECTION IN WHICH THE PIXELS LIGHT UP CAN BE SWITCHED USING THE DIRECTION SET FEATURE ON PAGE 87 WARM WHITE LED 16 0 255 096 10096 AMBER LED 16 0 255 096 10096 0 255 0 255 4 4 4 COOL WHITE LED 17 0 100 WARM WHITE LED 17 0 100 per AMBER LED 17 0 255 0 100 Pe COOL WHITE LED 18 0 255 0 100 WARM WHITE LED 18 AMBER LED 18 0 100 Elation Professional www elationlighting com ELED TW Strip Instruction Manual Page 15 0 100 7 8 9 50 51 52 53 54 ELED TW Strip Color Ma
6. connected properly and are wired correctly pin 3 is hot on some other DMX devices pin 2 may be hot Also check that all cables are connected to the right connectors it does matter which way the inputs and outputs are connected Unit does not respond to sound 1 Quiet or high pitched sounds will not activate the unit Elation Professional www elationlighting com ELED TW Strip Instruction Manual Page 17 ELED TW Strip Warranty 2 YEAR LIMITED WARRANTY A Elation Professionals hereby warrants to the original purchaser Elation Profes sionals products to be free of manufacturing defects in material and workmanship for a period of two years 730 days from the date of purchase This warranty shall be valid only if the product is purchased within the United States of America including possessions and territories It is the owner s responsibility to establish the date and place of purchase by acceptable evidence at the time service is sought B For warranty service send the product only to the Elation Professionalse factory All shipping charges must be pre paid If the requested repairs or service including parts replacement are within the terms of this warranty Elation Professionalse will pay return shipping charges only to a designated point within the United States If the entire instrument is sent it must be shipped in its original package No accessories should be shipped with the product If any accessories ar
7. cro Chart DMX CW WW AM DMX CW WW AM black 0 0 0 0 Macro model8 120 126 0 145 212 Macro model 1 7 255 206 143 Macro model9 127 133 0 121 192 Macro mode2 8 14 254 177 153 0 129 184 Macro mode3 15 21 254 192 138 Macro mode21 141 147 0 83 115 0 1 0 Macro mode20 134 140 Macro mode4 22 28 254 165 98 Macro mode22 148 154 97 166 Macro mode5 29 35 254 121 0 Macromode23 155 161 100 167 Macro mode6 36 42 176 17 0 Macro mode24 162 168 40 86 Macro mode7 43 49 96 0 11 Macro mode25 169 175 209 219 182 Macro mode8 50 56 234 139 171 Macro mode26 176 183 42 165 85 Macro mode9 57 63 224 5 97 Macro mode27 184 191 0 46 35 Macro mode10 64 70 175 77 173 Macro model1 71 77 119 130 199 Macro mode12 78 84 147 164 212 Macro mode28 192 199 8 107 222 Macro mode29 200 207 107 156 231 Macro mode30 208 215 165 198 247 Macro mode13 85 91 88 2 163 Macro mode31 216 223 0 0 189 Macro mode14 92 98 0 38 86 Macro mode32 224 231 255 255 255 Macro model5 99 105 0 142 208 Macro mode33 232 249 255 0 0 Macro model6 106 112 52 148 209 Macro mode34 240 247 0 255 0 Macro mode17 113 119 1 134 201 Macro mode35 248 255 0 0 255 ELED TW Strip Photometric Chart ED TW STRIP olor 2m W LUX 407 3231 3356 5941 209 2 1464 1179 2959 168 5479 4327 775 2 3937 3730 3620 K WW LUX K AM LUX
8. e controlling units built in programs Any unit can act as a Master or as a Slave however only one unit can be pro grammed to act as the Master Master Slave Connections and Settings 1 Daisy chain your units via the XLR connector on the rear of the unit Use standard XLR data cables to link your units together Remem ber that the Male XLR connector is the input and the Female XLR connector is the ouput The first unit in the chain master will use the female XLR connector only The last unit in the chain will use the male XLR connector only Set the Master unit to your desired mode or operation For the Slave unit s set the display to any DMX channel mode Connect the Slave unit or units and they will automatically start to follow the Master BON Elation Professional www elationlighting com ELED TW Strip Instruction Manual Page 10 1 Channel Mode ELED TW Strip Value 1 0 255 COLOR MACROS PLEASE SEE COLOR MACRO CHART ON PAGE 16 ELED TW Strip 2 Channel Mode erena e e Ij 1 0 255 COLOR MACROS PLEASE SEE COLOR MACRO CHART ON PAGE 16 0 255 ELED TW Strip 1 0 255 2 0 255 3 AMBER 0 255 0 100 ELED TW Strip 4 Channel Mode COOL WHITE 0 100 WARM WHITE 0 100 AMBER 0 100 MASTER DIMMER 0 100 MASTER DIMMER 0 100 3 Channel Mode COOL WHITE 0 100 WARM WHITE 0 100 3 0 255 4 0 255 Elation Professional www elation
9. e possibilities of erratic behavior Termination reduces signal errors and avoids signal transmission problems O and interference It is always advisable o to connect a DMX terminal Resistanc 120 Ohm 1 4 W between PIN 2 DMX and PIN 3 DMX of the last fixture 5 Pin XLR DMX Connectors Some manufactures use 5 pin DMX 512 data cables for DATA transmission in place of 3 pin 5 pin DMX fixtures may be implemented in a 3 pin DMX line When inserting standard 5 pin data cables in to a 3 pin line a cable adaptor must be used these adaptors are readily available at most electric stores The chart below details a proper cable conversion 3 Pin XLR to 5 Pin XLR Conversion Conductor 3 Pin XLR Female Out 5 Pin XLR Male In Ground Shield Pin 1 Pin 1 Data Compliment signal Pin2 Pin2 Data True signal Pin3 Pin 3 Not Used Do Not Use Not Used Do Not Use Elation Professional www elationlighting com ELED TW Strip Instruction Manual Page 6 ELED TW Strip Operating Instructions LED Display Backlight On Off To set the LED display to turn off after 10 seconds press the MODE button until Disperm BackLight is displayed Either On or Off will be displayed Press the UP or DOWN button so that Off is displayed the display will now turn off after 10secs Press any button for at least 5secs to turn the display on again Be advised though that the display will turn off automatically af
10. e shipped with the product Elation Professionals shall have no liability whatsoever for loss of or damage to any such accessories nor for the safe return thereof C This warranty is void if the serial number has been altered or removed if the prod uct is modified in any manner which Elation Professionals concludes after inspec tion affects the reliability of the product if the product has been repaired or serviced by anyone other than the Elation Professionals factory unless prior written authori zation was issued to purchaser by Elation Professionalse if the product is damaged because not properly maintained as set forth in the instruction manual D This is not a service contract and this warranty does not include maintenance cleaning or periodic check up During the period specified above Elation Profession alse will replace defective parts at its expense and will absorb all expenses for war ranty service and repair labor by reason of defects in material or workmanship The sole responsibility of Elation Professionals under this warranty shall be limited to the repair of the product or replacement thereof including parts at the sole discretion of Elation Professionals All products covered by this warranty were manufactured after January 1 1990 and bear identifying marks to that effect E Elation Professionalse reserves the right to make changes in design and or improvements upon its products without any obligation to include
11. el mode and 54 Channel mode This feature is also used with some built in programs under Program Mode ELED TW Strip Warranty Registration The ELED TW Strip carries a two year limited warranty Please fill out the enclosed warranty card to validate your purchase All returned service items whether under warranty or not must be freight pre paid and accompany a return authorization R A number The R A number must be clearly written on the outside of the return package A brief description of the problem as well as the R A number must also be written down on a piece of paper included in the shipping carton If the unit is under warranty you must provide a copy of your proof of purchase invoice You may obtain a R A number by contacting our customer support team on our customer support number All pack ages returned to the service department not displaying a R A number on the outside of the package will be returned to the shipper Elation Professional www elationlighting com ELED TW Strip Instruction Manual Page 3 ELED TW Strip Safety Precautions To reduce the risk of electrical shock or fire do not expose this unit rain or moisture Do not spill water or other liquids into or on to your unit Do not attempt to operate this unit if the power cord has been frayed or broken Do not attempt to remove or break off the ground prong from the electrical cord This prong is used to reduce the risk of electrical shock and fire in ca
12. ing at the end or anywhere in the middle When a fixture is assigned a DMX address of 1 the DMX controller knows to send DATA assigned to address 1 to that unit no matter where it is located in the DMX chain Data Cable DMX Cable Requirements For DMX Operation The ELED TW Strip has 8 DMX Channel Modes The DMX address is set electronically using the controls on the rear panel of the unit Your unit and your DMX controller require a approved DMX 512 110 Ohm Data cable for data input and data output We recommend Accu Cable DMX cables If you are making your own cables be sure to use stan dard 110 120 Ohm shielded cable This cable may be purchased at almost all professional sound and lighting stores Your cables should be made with a male and female XLR connector on either end of the cable Also remember that DMX cable must be daisy chained and cannot be split Figure 1 Elation Professional www elationlighting com ELED TW Strip Instruction Manual Page 5 ELED TW Strip Set Up Special Note Line Termination When longer runs of cable are used you may need to use a terminator on the last unit to avoid erratic behavior A terminator is a 110 120 ohm 1 4 watt resistor which is con nected between pins 2 and 3 of a male XLR connector DATA and DATA This unit is inserted in the female XLR connector of the last unit in your daisy chain to terminate the line Using a cable terminator ADJ part number Z DMX T will decrease th
13. lighting com ELED TW Strip Instruction Manual Page 11 ELED TW Strip 6 Channel Mode COOL WHITE 0 255 096 10096 WARM WHITE 096 10096 AMBER 096 10096 0 255 0 255 4 O 255 COLOR MACROS PLEASE SEE COLOR MACRO CHART ON PAGE 16 5 0 15 NOTHING 16 255 STROBING SPEED CONTROL 6 0 255 MASTER DIMMER 0 100 Elation Professional www elationlighting com ELED TW Strip Instruction Manual Page 12 ELED TW Strip 7 Channel Mode Value Function COOL WHITE 0 255 0 100 WARM WHITE 0 100 AMBER 0 100 1 0 255 3 0 255 STROBING PROGRAM SPEED 0 15 NOTHING 16 255 STROBING SLOW FAST 0 255 PROGRAM SPEED SLOW FAST MODE OFF AUTO MIX 3 COLOR JUMP 7 COLOR JUMP SOUND ACTIVE 0 255 MASTER DIMMER 0 10096 Channel 1 2 amp 3 will not work when Channel 4 is being used When using Channel 6 Channel 5 will control the speed of the color changing 2 0 255 COLOR MACROS PLEASE SEE COLOR MACRO CHART ON PAGE 16 Elation Professional www elationlighting com ELED TW Strip Instruction Manual Page 13 ELED TW Strip 27 Channel Mode COOL WHITE LED 1 amp 2 0 100 WARM WHITE LED 1 amp 2 0 100 AMBER LED 1 amp 2 0 100 COOL WHITE LED 3 8 4 0 100 WARM WHITE LED 3 amp 4 0 100 AMBER LED 3 amp 4 0 100 COOL WHITE LED 5 amp 6 0 100 WARM WHITE LED 5 amp 6 0 100 CHANNELS 9 19 THE SAME WARM WHITE COOL W
14. not appear to operate normally or exhibits a marked change in performance Elation Professional www elationlighting com ELED TW Strip Instruction Manual Page 4 ELED TW Strip Set Up Power Supply The Elation ELED TW Strip contains an automatic voltage switch which will auto sense the voltage when it is plugged into the power source With this switch there is no need to worry about the correct power voltage this unit can be plugged in anywhere DMX 512 DMX is short for Digital Multiplex This is a universal pro tocol used by most lighting and controller manufactures as a form of communication between intelligent fixtures and controllers A DMX controller sends DMX data instructions from the controller to the fix ture DMX data is sent as serial data that travels from fixture to fixture via the DATA IN and DATA OUT XLR terminals located on all DMX fixtures most controllers only have a DATA OUT terminal DMX Linking DMX is a language allowing all makes and models of different manufactures to be linked together and operate from a single controller as long as all fixtures and the controller are DMX compli ant To ensure proper DMX data transmission when using several DMX fixtures try to use the shortest cable path possible The order in which fixtures are connected in a DMX line does not influence the DMX addressing For example a fixture assigned a DMX address of 1 may be placed anywhere in a DMX line at the beginn
15. se of an internal short e Disconnect from main power before making any type of connection Do not remove the cover under any conditions There are no user serviceable parts inside e Never operate this unit when it s cover is removed e Never plug this unit in to a dimmer pack e Always be sure to mount this unit in an area that will allow proper ventilation Allow about 6 15cm between this device and a wall Do not attempt to operate this unit if it becomes damaged e This unit is intended for indoor use only use of this product out doors voids all warranties e During long periods of non use disconnect the unit s main power e Always mount this unit in safe and stable matter e Power supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them paying particular attention to the point they exit from the unit Cleaning The fixture should be cleaned only as recommended by the manufacturer See page 17 for cleaning details e Heat The appliance should be situated away from heat sources such as radiators heat registers stoves or other appliances inclu ding amplifiers that produce heat The fixture should be serviced by qualified service personnel when A The power supply cord or the plug has been damaged B Objects have fallen or liquid has been spilled into the appliance C The appliance has been exposed to rain or water D The appliance does
16. ter 10 seconds of inactivity To make the backlight display stay on at all times press the UP of DOWN button so that On is displayed Operating Modes You can use the ELED TW Strip in four ways e Macro Mode There are 35 color macros to choose from e Program Mode There are 15 built in programs and sound active mode to choose from e Fade Mode This mode is used in conjunction with the Macro mode WW CW AM mode Control the intensity of all 3 colors adjusting the intensity to your desire DMX control mode This function will allow you to control each individual fixtures traits with a standard DMX 512 controller such as as the Elation Show Designer Macro Mode 1 Plug the fixture in and press the MODE button until Color Macro is displayed 2 There are 35 macros to choose from Select your desired macro by pressing the UP and DOWN buttons Fade Program This mode is used in conjunction with the WW CW AM mode 1 Torun a fade program first create your desired color in WW CW AM mode After you have created your color press the MODE button until Program Fade Speed is displayed 2 Press the UP or DOWN buttons to make the adjustmetns Speed 0 is the slowest speed Speed 15 the fastest speed Program Mode 1 Plug the fixture in and press the MODE button until Color Program is displayed 2 There are 15 built in programs to choose from or you can select sound active to run
17. the unit by sound Select your desired program Elation Professional www elationlighting com ELED TW Strip Instruction Manual Page 7 ELED TW Strip Operating Instructions by pressing the UP and DOWN buttons You can set your program speed by following the next set of instructions The direction of cer tain programs can also be changed under Directions Set Direction Set This feature is used in conjunction with 27 Channel DMX mode and 54 Channel DMX Mode The direction in which the pixels light up can be reversed so that the pixel line up can start at either end of the bar This feature is useful when the unit is installed in a reversed orientation so the unit itself does not have to be uninstalled and reversed Example When using 27 Channel mode Channel 1 LEDs 1 8 2 can start at either end of the bar depending on the Direction Set set up 1 To adjust the speed of your program press the MODE button until Direction Set is displayed 2 Press the UP or DOWN buttons to select Positive in which the pix els light up from right to left or Negative in which the pixels will light up left to right Program Mode Speed Adjustment 1 To adjust the speed of your program press the MODE button until Color Speed is displayed 2 Press the UP or DOWN buttons to make the adjustmetns Speed 1 is the slowest speed Speed 16 the fastest speed WW CW AM Mode 1 Plug the fixture in and press the MODE button un
18. these changes in any products theretofore manufactured F No warranty whether expressed or implied is given or made with respect to any accessory supplied with products described above Except to the extent prohibited by applicable law all implied warranties made by Elation Professionalse in connec tion with this product including warranties of merchantability or fitness are limited in duration to the warranty period set forth above And no warranties whether expressed or implied including warranties of merchantability or fitness shall apply to this prod uct after said period has expired The consumer s and or Dealer s sole remedy shall be such repair or replacement as is expressly provided above and under no circum stances shall Elation Professionals be liable for any loss or damage direct or conse quential arising out of the use of or inability to use this product G This warranty is the only written warranty applicable to Elation Professionalse Products and supersedes all prior warranties and written descriptions of warranty terms and conditions heretofore published Elation Professional www elationlighting com ELED TW Strip Instruction Manual Page 18 Model ELED TW Strip SPECIFICATIONS Working Position Any safe working position Voltage 100V 240V 47 63Hz LED s 18 x 5 Watt Tri White LED s Power Consumption 120W Power Cord Daisy Chain 6 Fixtures Max Fuse 3 15 Amp Beam Angle 20 50 Degrees
19. til 2 When Single Color Cool White is displayed you are in Cool White dimming mode Press the UP and DOWN buttons to adjust intensity 3 When Single Color Warm White is displayed you are in Warm White dimming mode Press the UP and DOWN buttons to adjust intensity 4 When Single Color Amber is displayed you are in Amber dimming mode Press the UP and DOWN buttons to adjust intensity 5 You can use the color macro chart on page 16 to create one of the 35 macros DMX Mode Operating through a DMX controller gives the user the freedom to create their own programs tailored to their own individual needs The ELED TW Strip has 8 DMX modes 1 Channel mode 2 Channel mode 3 Channel mode 4 Channel mode 6 Channel mode 7 Channel mode 27 Channel mode 8 54 Channel mode See pages 11 15 for each modes DMX Elation Professional www elationlighting com ELED TW Strip Instruction Manual Page 8 ELED TW Strip Operating Instructions traits 1 This function will allow you to control each individual fixture s traits with a standard DMX 512 controller such as the Elation Show Designer or the Elation DMX OperatorTM To run your fixture in DMX mode plug in the fixture via the XLR con nections to any standard DMX controller Select your desired DMX mode and then press the UP or DOWN buttons to adjust the DMX address DMX Channel Modes are as follows To run the 1 Channel Mode press the MODE button until 1
20. vice Hours are Monday through Friday 8 00 a m to 4 30 p m Pacific Standard Time Voice 323 582 3322 Fax 323 832 9142 E mail support elationlighting com Warning To prevent or reduce the risk of electrical shock or fire do not expose this unit to rain or moisture Caution There are no user serviceable parts inside this unit Do not attempt any repairs yourself doing so will void your manufactures war ranty In the unlikely event your unit may require service please contact eElation customer support PLEASE recycle the shipping carton when ever possible Elation Professional www elationlighting com ELED TW Strip Instruction Manual Page 2 ELED TW Strip General Instructions To optimize the performance of this product please read these operat ing instructions carefully to familiarize yourself with the basic operations of this unit These instructions contain important safety information regarding the use and maintenance of this unit Please keep this manual with the unit for future reference ELED TW Strip Features e Built in Microphone Four Operating Modes e 35 Color Macros e DMX 512 protocol 8 DMX Modes 1 Channel Mode 2 Channel Mode 3 Channel Mode 4 Channel Mode 6 Channel Mode 7 Channel Mode 27 Channel Mode amp 54 Channel Mode e Pixel Direction Control The direction in which the pixels light up can be reversed so that the pixels can light up at either end of the bar This is used with 27 Chann
Download Pdf Manuals
Related Search